| /** @file | |
| The header file of IScsiDriver.c. | |
| Copyright (c) 2004 - 2018, Intel Corporation. All rights reserved.<BR> | |
| (C) Copyright 2017 Hewlett Packard Enterprise Development LP<BR> | |
| SPDX-License-Identifier: BSD-2-Clause-Patent | |
| **/ | |
| #ifndef _ISCSI_DRIVER_H_ | |
| #define _ISCSI_DRIVER_H_ | |
| #define ISCSI_V4_PRIVATE_GUID \ | |
| { \ | |
| 0xfa3cde4c, 0x87c2, 0x427d, { 0xae, 0xde, 0x7d, 0xd0, 0x96, 0xc8, 0x8c, 0x58 } \ | |
| } | |
| #define ISCSI_V6_PRIVATE_GUID \ | |
| { \ | |
| 0x28be27e5, 0x66cc, 0x4a31, { 0xa3, 0x15, 0xdb, 0x14, 0xc3, 0x74, 0x4d, 0x85 } \ | |
| } | |
| #define ISCSI_INITIATOR_NAME_VAR_NAME L"I_NAME" | |
| #define IP_MODE_AUTOCONFIG_IP4 3 | |
| #define IP_MODE_AUTOCONFIG_IP6 4 | |
| #define ALWAYS_USE_UEFI_ISCSI_AND_IGNORE_ISCSI_HBA 0x00 | |
| #define STOP_UEFI_ISCSI_IF_HBA_INSTALL_AIP 0x01 | |
| #define STOP_UEFI_ISCSI_IF_AIP_SUPPORT_IP4 0x02 | |
| #define STOP_UEFI_ISCSI_IF_AIP_SUPPORT_IP6 0x04 | |
| #define STOP_UEFI_ISCSI_IF_AIP_SUPPORT_OFFLOAD 0x08 | |
| #define STOP_UEFI_ISCSI_IF_AIP_SUPPORT_MPIO 0x10 | |
| #define STOP_UEFI_ISCSI_IF_AIP_CONFIGURED_IP4 0x20 | |
| #define STOP_UEFI_ISCSI_IF_AIP_CONFIGURED_IP6 0x40 | |
| #define ALWAYS_USE_ISCSI_HBA_AND_IGNORE_UEFI_ISCSI 0xFF | |
| extern EFI_COMPONENT_NAME2_PROTOCOL gIScsiComponentName2; | |
| extern EFI_COMPONENT_NAME_PROTOCOL gIScsiComponentName; | |
| extern EFI_UNICODE_STRING_TABLE *gIScsiControllerNameTable; | |
| extern EFI_ISCSI_INITIATOR_NAME_PROTOCOL gIScsiInitiatorName; | |
| extern EFI_AUTHENTICATION_INFO_PROTOCOL gIScsiAuthenticationInfo; | |
| extern EFI_EXT_SCSI_PASS_THRU_PROTOCOL gIScsiExtScsiPassThruProtocolTemplate; | |
| extern EFI_GUID gIScsiV4PrivateGuid; | |
| extern EFI_GUID gIScsiV6PrivateGuid; | |
| typedef struct { | |
| CHAR16 PortString[ISCSI_NAME_IFR_MAX_SIZE]; | |
| LIST_ENTRY NicInfoList; | |
| UINT8 NicCount; | |
| UINT8 CurrentNic; | |
| UINT8 MaxNic; | |
| BOOLEAN Ipv6Flag; | |
| BOOLEAN OneSessionEstablished; | |
| BOOLEAN EnableMpio; | |
| UINT8 MpioCount; // The number of attempts in MPIO. | |
| UINT8 Krb5MpioCount; // The number of attempts login with KRB5 in MPIO. | |
| UINT8 SinglePathCount; // The number of single path attempts. | |
| UINT8 ValidSinglePathCount; // The number of valid single path attempts. | |
| UINT8 BootSelectedIndex; | |
| UINT8 AttemptCount; | |
| LIST_ENTRY AttemptConfigs; // User configured Attempt list. | |
| CHAR8 InitiatorName[ISCSI_NAME_MAX_SIZE]; | |
| UINTN InitiatorNameLength; | |
| } ISCSI_PRIVATE_DATA; | |
| extern ISCSI_PRIVATE_DATA *mPrivate; | |
| typedef struct { | |
| LIST_ENTRY Link; | |
| UINT32 HwAddressSize; | |
| EFI_MAC_ADDRESS PermanentAddress; | |
| UINT8 NicIndex; | |
| UINT16 VlanId; | |
| UINTN BusNumber; | |
| UINTN DeviceNumber; | |
| UINTN FunctionNumber; | |
| BOOLEAN Ipv6Available; | |
| } ISCSI_NIC_INFO; | |
| typedef struct _ISCSI_PRIVATE_PROTOCOL { | |
| UINT32 Reserved; | |
| } ISCSI_PRIVATE_PROTOCOL; | |
| // | |
| // EFI Driver Binding Protocol for iSCSI driver. | |
| // | |
| /** | |
| Tests to see if this driver supports a given controller. If a child device is provided, | |
| it tests to see if this driver supports creating a handle for the specified child device. | |
| This function checks to see if the driver specified by This supports the device specified by | |
| ControllerHandle. Drivers typically use the device path attached to | |
| ControllerHandle and/or the services from the bus I/O abstraction attached to | |
| ControllerHandle to determine if the driver supports ControllerHandle. This function | |
| may be called many times during platform initialization. In order to reduce boot times, the tests | |
| performed by this function must be very small and take as little time as possible to execute. This | |
| function must not change the state of any hardware devices, and this function must be aware that the | |
| device specified by ControllerHandle may already be managed by the same driver or a | |
| different driver. This function must match its calls to AllocatePages() with FreePages(), | |
| AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol(). | |
| Since ControllerHandle may have been previously started by the same driver, if a protocol is | |
| already in the opened state, then it must not be closed with CloseProtocol(). This is required | |
| to guarantee the state of ControllerHandle is not modified by this function. | |
| @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance. | |
| @param[in] ControllerHandle The handle of the controller to test. This handle | |
| must support a protocol interface that supplies | |
| an I/O abstraction to the driver. | |
| @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This | |
| parameter is ignored by device drivers, and is optional for bus | |
| drivers. For bus drivers, if this parameter is not NULL, then | |
| the bus driver must determine if the bus controller specified | |
| by ControllerHandle and the child controller specified | |
| by RemainingDevicePath are both supported by this | |
| bus driver. | |
| @retval EFI_SUCCESS The device specified by ControllerHandle and | |
| RemainingDevicePath is supported by the driver specified by This. | |
| @retval EFI_ALREADY_STARTED The device specified by ControllerHandle and | |
| RemainingDevicePath is already managed by the driver | |
| specified by This. | |
| @retval EFI_ACCESS_DENIED The device specified by ControllerHandle and | |
| RemainingDevicePath is already managed by a different | |
| driver or an application that requires exclusive access. | |
| Currently not implemented. | |
| @retval EFI_UNSUPPORTED The device specified by ControllerHandle and | |
| RemainingDevicePath is not supported by the driver specified by This. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| IScsiIp4DriverBindingSupported ( | |
| IN EFI_DRIVER_BINDING_PROTOCOL *This, | |
| IN EFI_HANDLE ControllerHandle, | |
| IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL | |
| ); | |
| /** | |
| Starts a device controller or a bus controller. | |
| The Start() function is designed to be invoked from the EFI boot service ConnectController(). | |
| As a result, much of the error checking on the parameters to Start() has been moved into this | |
| common boot service. It is legal to call Start() from other locations, | |
| but the following calling restrictions must be followed or the system behavior will not be deterministic. | |
| 1. ControllerHandle must be a valid EFI_HANDLE. | |
| 2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned | |
| EFI_DEVICE_PATH_PROTOCOL. | |
| 3. Prior to calling Start(), the Supported() function for the driver specified by This must | |
| have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS. | |
| @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance. | |
| @param[in] ControllerHandle The handle of the controller to start. This handle | |
| must support a protocol interface that supplies | |
| an I/O abstraction to the driver. | |
| @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This | |
| parameter is ignored by device drivers, and is optional for bus | |
| drivers. For a bus driver, if this parameter is NULL, then handles | |
| for all the children of Controller are created by this driver. | |
| If this parameter is not NULL and the first Device Path Node is | |
| not the End of Device Path Node, then only the handle for the | |
| child device specified by the first Device Path Node of | |
| RemainingDevicePath is created by this driver. | |
| If the first Device Path Node of RemainingDevicePath is | |
| the End of Device Path Node, no child handle is created by this | |
| driver. | |
| @retval EFI_SUCCESS The device was started. | |
| @retval EFI_DEVICE_ERROR The device could not be started due to a device error. Currently not implemented. | |
| @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. | |
| @retval Others The driver failed to start the device. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| IScsiIp4DriverBindingStart ( | |
| IN EFI_DRIVER_BINDING_PROTOCOL *This, | |
| IN EFI_HANDLE ControllerHandle, | |
| IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL | |
| ); | |
| /** | |
| Stops a device controller or a bus controller. | |
| The Stop() function is designed to be invoked from the EFI boot service DisconnectController(). | |
| As a result, much of the error checking on the parameters to Stop() has been moved | |
| into this common boot service. It is legal to call Stop() from other locations, | |
| but the following calling restrictions must be followed or the system behavior will not be deterministic. | |
| 1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this | |
| same driver's Start() function. | |
| 2. The first NumberOfChildren handles of ChildHandleBuffer must all be a valid | |
| EFI_HANDLE. In addition, all of these handles must have been created in this driver's | |
| Start() function, and the Start() function must have called OpenProtocol() on | |
| ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER. | |
| @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance. | |
| @param[in] ControllerHandle A handle to the device being stopped. The handle must | |
| support a bus specific I/O protocol for the driver | |
| to use to stop the device. | |
| @param[in] NumberOfChildren The number of child device handles in ChildHandleBuffer. | |
| @param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL | |
| if NumberOfChildren is 0. | |
| @retval EFI_SUCCESS The device was stopped. | |
| @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| IScsiIp4DriverBindingStop ( | |
| IN EFI_DRIVER_BINDING_PROTOCOL *This, | |
| IN EFI_HANDLE ControllerHandle, | |
| IN UINTN NumberOfChildren, | |
| IN EFI_HANDLE *ChildHandleBuffer OPTIONAL | |
| ); | |
| /** | |
| Tests to see if this driver supports a given controller. If a child device is provided, | |
| it tests to see if this driver supports creating a handle for the specified child device. | |
| This function checks to see if the driver specified by This supports the device specified by | |
| ControllerHandle. Drivers typically use the device path attached to | |
| ControllerHandle and/or the services from the bus I/O abstraction attached to | |
| ControllerHandle to determine if the driver supports ControllerHandle. This function | |
| may be called many times during platform initialization. In order to reduce boot times, the tests | |
| performed by this function must be very small and take as little time as possible to execute. This | |
| function must not change the state of any hardware devices, and this function must be aware that the | |
| device specified by ControllerHandle may already be managed by the same driver or a | |
| different driver. This function must match its calls to AllocatePages() with FreePages(), | |
| AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol(). | |
| Since ControllerHandle may have been previously started by the same driver, if a protocol is | |
| already in the opened state, then it must not be closed with CloseProtocol(). This is required | |
| to guarantee the state of ControllerHandle is not modified by this function. | |
| @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance. | |
| @param[in] ControllerHandle The handle of the controller to test. This handle | |
| must support a protocol interface that supplies | |
| an I/O abstraction to the driver. | |
| @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This | |
| parameter is ignored by device drivers, and is optional for bus | |
| drivers. For bus drivers, if this parameter is not NULL, then | |
| the bus driver must determine if the bus controller specified | |
| by ControllerHandle and the child controller specified | |
| by RemainingDevicePath are both supported by this | |
| bus driver. | |
| @retval EFI_SUCCESS The device specified by ControllerHandle and | |
| RemainingDevicePath is supported by the driver specified by This. | |
| @retval EFI_ALREADY_STARTED The device specified by ControllerHandle and | |
| RemainingDevicePath is already managed by the driver | |
| specified by This. | |
| @retval EFI_ACCESS_DENIED The device specified by ControllerHandle and | |
| RemainingDevicePath is already managed by a different | |
| driver or an application that requires exclusive access. | |
| Currently not implemented. | |
| @retval EFI_UNSUPPORTED The device specified by ControllerHandle and | |
| RemainingDevicePath is not supported by the driver specified by This. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| IScsiIp6DriverBindingSupported ( | |
| IN EFI_DRIVER_BINDING_PROTOCOL *This, | |
| IN EFI_HANDLE ControllerHandle, | |
| IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL | |
| ); | |
| /** | |
| Starts a device controller or a bus controller. | |
| The Start() function is designed to be invoked from the EFI boot service ConnectController(). | |
| As a result, much of the error checking on the parameters to Start() has been moved into this | |
| common boot service. It is legal to call Start() from other locations, | |
| but the following calling restrictions must be followed or the system behavior will not be deterministic. | |
| 1. ControllerHandle must be a valid EFI_HANDLE. | |
| 2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned | |
| EFI_DEVICE_PATH_PROTOCOL. | |
| 3. Prior to calling Start(), the Supported() function for the driver specified by This must | |
| have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS. | |
| @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance. | |
| @param[in] ControllerHandle The handle of the controller to start. This handle | |
| must support a protocol interface that supplies | |
| an I/O abstraction to the driver. | |
| @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This | |
| parameter is ignored by device drivers, and is optional for bus | |
| drivers. For a bus driver, if this parameter is NULL, then handles | |
| for all the children of Controller are created by this driver. | |
| If this parameter is not NULL and the first Device Path Node is | |
| not the End of Device Path Node, then only the handle for the | |
| child device specified by the first Device Path Node of | |
| RemainingDevicePath is created by this driver. | |
| If the first Device Path Node of RemainingDevicePath is | |
| the End of Device Path Node, no child handle is created by this | |
| driver. | |
| @retval EFI_SUCCESS The device was started. | |
| @retval EFI_DEVICE_ERROR The device could not be started due to a device error. Currently not implemented. | |
| @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. | |
| @retval Others The driver failed to start the device. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| IScsiIp6DriverBindingStart ( | |
| IN EFI_DRIVER_BINDING_PROTOCOL *This, | |
| IN EFI_HANDLE ControllerHandle, | |
| IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL | |
| ); | |
| /** | |
| Stops a device controller or a bus controller. | |
| The Stop() function is designed to be invoked from the EFI boot service DisconnectController(). | |
| As a result, much of the error checking on the parameters to Stop() has been moved | |
| into this common boot service. It is legal to call Stop() from other locations, | |
| but the following calling restrictions must be followed or the system behavior will not be deterministic. | |
| 1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this | |
| same driver's Start() function. | |
| 2. The first NumberOfChildren handles of ChildHandleBuffer must all be a valid | |
| EFI_HANDLE. In addition, all of these handles must have been created in this driver's | |
| Start() function, and the Start() function must have called OpenProtocol() on | |
| ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER. | |
| @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance. | |
| @param[in] ControllerHandle A handle to the device being stopped. The handle must | |
| support a bus specific I/O protocol for the driver | |
| to use to stop the device. | |
| @param[in] NumberOfChildren The number of child device handles in ChildHandleBuffer. | |
| @param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL | |
| if NumberOfChildren is 0. | |
| @retval EFI_SUCCESS The device was stopped. | |
| @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| IScsiIp6DriverBindingStop ( | |
| IN EFI_DRIVER_BINDING_PROTOCOL *This, | |
| IN EFI_HANDLE ControllerHandle, | |
| IN UINTN NumberOfChildren, | |
| IN EFI_HANDLE *ChildHandleBuffer OPTIONAL | |
| ); | |
| // | |
| // EFI Component Name(2) Protocol for iSCSI driver. | |
| // | |
| /** | |
| Retrieves a Unicode string that is the user readable name of the driver. | |
| This function retrieves the user readable name of a driver in the form of a | |
| Unicode string. If the driver specified by This has a user readable name in | |
| the language specified by Language, then a pointer to the driver name is | |
| returned in DriverName, and EFI_SUCCESS is returned. If the driver specified | |
| by This does not support the language specified by Language, | |
| then EFI_UNSUPPORTED is returned. | |
| @param[in] This A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or | |
| EFI_COMPONENT_NAME_PROTOCOL instance. | |
| @param[in] Language A pointer to a Null-terminated ASCII string | |
| array indicating the language. This is the | |
| language of the driver name that the caller is | |
| requesting, and it must match one of the | |
| languages specified in SupportedLanguages. The | |
| number of languages supported by a driver is up | |
| to the driver writer. Language is specified | |
| in RFC 4646 or ISO 639-2 language code format. | |
| @param[out] DriverName A pointer to the Unicode string to return. | |
| This Unicode string is the name of the | |
| driver specified by This in the language | |
| specified by Language. | |
| @retval EFI_SUCCESS The Unicode string for the Driver specified by | |
| This and the language specified by Language was | |
| returned in DriverName. | |
| @retval EFI_INVALID_PARAMETER Language is NULL. | |
| @retval EFI_INVALID_PARAMETER DriverName is NULL. | |
| @retval EFI_UNSUPPORTED The driver specified by This does not support | |
| the language specified by Language. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| IScsiComponentNameGetDriverName ( | |
| IN EFI_COMPONENT_NAME_PROTOCOL *This, | |
| IN CHAR8 *Language, | |
| OUT CHAR16 **DriverName | |
| ); | |
| /** | |
| Retrieves a Unicode string that is the user readable name of the controller | |
| that is being managed by a driver. | |
| This function retrieves the user readable name of the controller specified by | |
| ControllerHandle and ChildHandle in the form of a Unicode string. If the | |
| driver specified by This has a user readable name in the language specified by | |
| Language, then a pointer to the controller name is returned in ControllerName, | |
| and EFI_SUCCESS is returned. If the driver specified by This is not currently | |
| managing the controller specified by ControllerHandle and ChildHandle, | |
| then EFI_UNSUPPORTED is returned. If the driver specified by This does not | |
| support the language specified by Language, then EFI_UNSUPPORTED is returned. | |
| @param[in] This A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or | |
| EFI_COMPONENT_NAME_PROTOCOL instance. | |
| @param[in] ControllerHandle The handle of a controller that the driver | |
| specified by This is managing. This handle | |
| specifies the controller whose name is to be | |
| returned. | |
| @param[in] ChildHandle The handle of the child controller to retrieve | |
| the name of. This is an optional parameter that | |
| may be NULL. It will be NULL for device | |
| drivers. It will also be NULL for a bus drivers | |
| that wish to retrieve the name of the bus | |
| controller. It will not be NULL for a bus | |
| driver that wishes to retrieve the name of a | |
| child controller. | |
| @param[in] Language A pointer to a Null-terminated ASCII string | |
| array indicating the language. This is the | |
| language of the driver name that the caller is | |
| requesting, and it must match one of the | |
| languages specified in SupportedLanguages. The | |
| number of languages supported by a driver is | |
| determined by the driver writer. Language is | |
| specified inRFC 4646 or ISO 639-2 language code | |
| format. | |
| @param[out] ControllerName A pointer to the Unicode string to return. | |
| This Unicode string is the name of the | |
| controller specified by ControllerHandle and | |
| ChildHandle in the language specified by | |
| Language from the point of view of the driver | |
| specified by This. | |
| @retval EFI_SUCCESS The Unicode string for the user readable name in | |
| the language specified by Language for the | |
| driver specified by This was returned in | |
| DriverName. | |
| @retval EFI_INVALID_PARAMETER ControllerHandle is NULL. | |
| @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid | |
| EFI_HANDLE. | |
| @retval EFI_INVALID_PARAMETER Language is NULL. | |
| @retval EFI_INVALID_PARAMETER ControllerName is NULL. | |
| @retval EFI_UNSUPPORTED The driver specified by This is not currently | |
| managing the controller specified by | |
| ControllerHandle and ChildHandle. | |
| @retval EFI_UNSUPPORTED The driver specified by This does not support | |
| the language specified by Language. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| IScsiComponentNameGetControllerName ( | |
| IN EFI_COMPONENT_NAME_PROTOCOL *This, | |
| IN EFI_HANDLE ControllerHandle, | |
| IN EFI_HANDLE ChildHandle OPTIONAL, | |
| IN CHAR8 *Language, | |
| OUT CHAR16 **ControllerName | |
| ); | |
| // | |
| // EFI iSCSI Initiator Name Protocol for iSCSI driver. | |
| // | |
| /** | |
| Retrieves the current set value of iSCSI Initiator Name. | |
| @param[in] This Pointer to the EFI_ISCSI_INITIATOR_NAME_PROTOCOL | |
| instance. | |
| @param[in, out] BufferSize Size of the buffer in bytes pointed to by Buffer / | |
| Actual size of the variable data buffer. | |
| @param[out] Buffer Pointer to the buffer for data to be read. | |
| @retval EFI_SUCCESS Data was successfully retrieved into the provided | |
| buffer and the BufferSize was sufficient to handle | |
| the iSCSI initiator name. | |
| @retval EFI_BUFFER_TOO_SMALL BufferSize is too small for the result. BufferSize | |
| will be updated with the size required to complete | |
| the request. Buffer will not be affected. | |
| @retval EFI_INVALID_PARAMETER BufferSize is NULL. BufferSize and Buffer will not | |
| be affected. | |
| @retval EFI_INVALID_PARAMETER Buffer is NULL. BufferSize and Buffer will not be | |
| affected. | |
| @retval EFI_DEVICE_ERROR The iSCSI initiator name could not be retrieved | |
| due to a hardware error. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| IScsiGetInitiatorName ( | |
| IN EFI_ISCSI_INITIATOR_NAME_PROTOCOL *This, | |
| IN OUT UINTN *BufferSize, | |
| OUT VOID *Buffer | |
| ); | |
| /** | |
| Sets the iSSI Initiator Name. | |
| @param[in] This Pointer to the EFI_ISCSI_INITIATOR_NAME_PROTOCOL | |
| instance. | |
| @param[in, out] BufferSize Size of the buffer in bytes pointed to by Buffer. | |
| @param[in] Buffer Pointer to the buffer for data to be written. | |
| @retval EFI_SUCCESS Data was successfully stored by the protocol. | |
| @retval EFI_UNSUPPORTED Platform policies do not allow for data to be | |
| written. | |
| @retval EFI_INVALID_PARAMETER BufferSize exceeds the maximum allowed limit. | |
| BufferSize will be updated with the maximum size | |
| required to complete the request. | |
| @retval EFI_INVALID_PARAMETER Buffersize is NULL. BufferSize and Buffer will not | |
| be affected. | |
| @retval EFI_INVALID_PARAMETER Buffer is NULL. BufferSize and Buffer will not be | |
| affected. | |
| @retval EFI_DEVICE_ERROR The data could not be stored due to a hardware | |
| error. | |
| @retval EFI_OUT_OF_RESOURCES Not enough storage is available to hold the data | |
| @retval EFI_PROTOCOL_ERROR Input iSCSI initiator name does not adhere to RFC | |
| 3720 | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| IScsiSetInitiatorName ( | |
| IN EFI_ISCSI_INITIATOR_NAME_PROTOCOL *This, | |
| IN OUT UINTN *BufferSize, | |
| IN VOID *Buffer | |
| ); | |
| // | |
| // EFI_AUTHENTICATION_INFO_PROTOCOL for iSCSI driver. | |
| // | |
| /** | |
| Retrieves the authentication information associated with a particular controller handle. | |
| @param[in] This Pointer to the EFI_AUTHENTICATION_INFO_PROTOCOL. | |
| @param[in] ControllerHandle Handle to the Controller. | |
| @param[out] Buffer Pointer to the authentication information. This function is | |
| responsible for allocating the buffer and it is the caller's | |
| responsibility to free buffer when the caller is finished with buffer. | |
| @retval EFI_DEVICE_ERROR The authentication information could not be | |
| retrieved due to a hardware error. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| IScsiGetAuthenticationInfo ( | |
| IN EFI_AUTHENTICATION_INFO_PROTOCOL *This, | |
| IN EFI_HANDLE ControllerHandle, | |
| OUT VOID **Buffer | |
| ); | |
| /** | |
| Set the authentication information for a given controller handle. | |
| @param[in] This Pointer to the EFI_AUTHENTICATION_INFO_PROTOCOL. | |
| @param[in] ControllerHandle Handle to the Controller. | |
| @param[in] Buffer Pointer to the authentication information. | |
| @retval EFI_UNSUPPORTED If the platform policies do not allow setting of | |
| the authentication information. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| IScsiSetAuthenticationInfo ( | |
| IN EFI_AUTHENTICATION_INFO_PROTOCOL *This, | |
| IN EFI_HANDLE ControllerHandle, | |
| IN VOID *Buffer | |
| ); | |
| // | |
| // EFI_EXT_SCSI_PASS_THRU_PROTOCOL for iSCSI driver. | |
| // | |
| /** | |
| Sends a SCSI Request Packet to a SCSI device that is attached to the SCSI channel. | |
| This function supports both blocking I/O and nonblocking I/O. The blocking I/O | |
| functionality is required, and the nonblocking I/O functionality is optional. | |
| @param[in] This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance. | |
| @param[in] Target The Target is an array of size TARGET_MAX_BYTES and it | |
| represents the id of the SCSI device to send the SCSI | |
| Request Packet. Each transport driver may choose to | |
| utilize a subset of this size to suit the needs | |
| of transport target representation. For example, a | |
| Fibre Channel driver may use only 8 bytes (WWN) | |
| to represent an FC target. | |
| @param[in] Lun The LUN of the SCSI device to send the SCSI Request Packet. | |
| @param[in, out] Packet A pointer to the SCSI Request Packet to send to the | |
| SCSI device specified by Target and Lun. | |
| @param[in] Event If nonblocking I/O is not supported then Event is ignored, | |
| and blocking I/O is performed. If Event is NULL, then | |
| blocking I/O is performed. If Event is not NULL and non | |
| blocking I/O is supported, then nonblocking I/O is performed, | |
| and Event will be signaled when the SCSI Request Packet | |
| completes. | |
| @retval EFI_SUCCESS The SCSI Request Packet was sent by the host. For | |
| bi-directional commands, InTransferLength bytes | |
| were transferred from InDataBuffer. | |
| For write and bi-directional commands, OutTransferLength | |
| bytes were transferred by OutDataBuffer. | |
| @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was not executed. | |
| The number of bytes that could be transferred is | |
| returned in InTransferLength. For write and | |
| bi-directional commands, OutTransferLength bytes | |
| were transferred by OutDataBuffer. | |
| @retval EFI_NOT_READY The SCSI Request Packet could not be sent because | |
| there are too many SCSI Request Packets already | |
| queued. The caller may retry later. | |
| @retval EFI_DEVICE_ERROR A device error occurred while attempting to send | |
| the SCSI Request Packet. | |
| @retval EFI_INVALID_PARAMETER Target, Lun, or the contents of ScsiRequestPacket | |
| are invalid. | |
| @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet | |
| is not supported by the host adapter. | |
| This includes the case of Bi-directional SCSI | |
| commands not supported by the implementation. | |
| The SCSI Request Packet was not sent, | |
| so no additional status information is available. | |
| @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI | |
| Request Packet to execute. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| IScsiExtScsiPassThruFunction ( | |
| IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, | |
| IN UINT8 *Target, | |
| IN UINT64 Lun, | |
| IN OUT EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet, | |
| IN EFI_EVENT Event OPTIONAL | |
| ); | |
| /** | |
| Used to retrieve the list of legal Target IDs and LUNs for SCSI devices on | |
| a SCSI channel. These can either be the list SCSI devices that are actually | |
| present on the SCSI channel, or the list of legal Target Ids and LUNs for the | |
| SCSI channel. Regardless, the caller of this function must probe the Target ID | |
| and LUN returned to see if a SCSI device is actually present at that location | |
| on the SCSI channel. | |
| @param[in] This The EFI_EXT_SCSI_PASS_THRU_PROTOCOL instance. | |
| @param[in, out] Target On input, a pointer to the Target ID of a SCSI | |
| device present on the SCSI channel. On output, a | |
| pointer to the Target ID of the next SCSI device | |
| present on a SCSI channel. An input value of | |
| 0xFFFFFFFF retrieves the Target ID of the first | |
| SCSI device present on a SCSI channel. | |
| @param[in, out] Lun On input, a pointer to the LUN of a SCSI device | |
| present on the SCSI channel. On output, a pointer | |
| to the LUN of the next SCSI device present on a | |
| SCSI channel. | |
| @retval EFI_SUCCESS The Target ID and Lun of the next SCSI device on | |
| the SCSI channel was returned in Target and Lun. | |
| @retval EFI_NOT_FOUND There are no more SCSI devices on this SCSI | |
| channel. | |
| @retval EFI_INVALID_PARAMETER Target is not 0xFFFFFFFF,and Target and Lun were | |
| not returned on a previous call to | |
| GetNextDevice(). | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| IScsiExtScsiPassThruGetNextTargetLun ( | |
| IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, | |
| IN OUT UINT8 **Target, | |
| IN OUT UINT64 *Lun | |
| ); | |
| /** | |
| Allocate and build a device path node for a SCSI device on a SCSI channel. | |
| @param[in] This Protocol instance pointer. | |
| @param[in] Target The Target ID of the SCSI device for which a | |
| device path node is to be allocated and built. | |
| @param[in] Lun The LUN of the SCSI device for which a device | |
| path node is to be allocated and built. | |
| @param[in, out] DevicePath A pointer to a single device path node that | |
| describes the SCSI device specified by Target and | |
| Lun. This function is responsible for allocating | |
| the buffer DevicePath with the boot service | |
| AllocatePool(). It is the caller's | |
| responsibility to free DevicePath when the caller | |
| is finished with DevicePath. | |
| @retval EFI_SUCCESS The device path node that describes the SCSI | |
| device specified by Target and Lun was allocated | |
| and returned in DevicePath. | |
| @retval EFI_NOT_FOUND The SCSI devices specified by Target and Lun does | |
| not exist on the SCSI channel. | |
| @retval EFI_INVALID_PARAMETER DevicePath is NULL. | |
| @retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate | |
| DevicePath. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| IScsiExtScsiPassThruBuildDevicePath ( | |
| IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, | |
| IN UINT8 *Target, | |
| IN UINT64 Lun, | |
| IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath | |
| ); | |
| /** | |
| Translate a device path node to a Target ID and LUN. | |
| @param[in] This Protocol instance pointer. | |
| @param[in] DevicePath A pointer to the device path node that describes | |
| a SCSI device on the SCSI channel. | |
| @param[out] Target A pointer to the Target ID of a SCSI device on | |
| the SCSI channel. | |
| @param[out] Lun A pointer to the LUN of a SCSI device on the SCSI | |
| channel. | |
| @retval EFI_SUCCESS DevicePath was successfully translated to a | |
| Target ID and LUN, and they were returned in | |
| Target and Lun. | |
| @retval EFI_INVALID_PARAMETER DevicePath/Target/Lun is NULL. | |
| @retval EFI_UNSUPPORTED This driver does not support the device path node | |
| type in DevicePath. | |
| @retval EFI_NOT_FOUND A valid translation from DevicePath to a Target | |
| ID and LUN does not exist. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| IScsiExtScsiPassThruGetTargetLun ( | |
| IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, | |
| IN EFI_DEVICE_PATH_PROTOCOL *DevicePath, | |
| OUT UINT8 **Target, | |
| OUT UINT64 *Lun | |
| ); | |
| /** | |
| Resets a SCSI channel.This operation resets all the SCSI devices connected to | |
| the SCSI channel. | |
| @param[in] This Protocol instance pointer. | |
| @retval EFI_UNSUPPORTED It is not supported. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| IScsiExtScsiPassThruResetChannel ( | |
| IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This | |
| ); | |
| /** | |
| Resets a SCSI device that is connected to a SCSI channel. | |
| @param[in] This Protocol instance pointer. | |
| @param[in] Target The Target ID of the SCSI device to reset. | |
| @param[in] Lun The LUN of the SCSI device to reset. | |
| @retval EFI_UNSUPPORTED It is not supported. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| IScsiExtScsiPassThruResetTargetLun ( | |
| IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, | |
| IN UINT8 *Target, | |
| IN UINT64 Lun | |
| ); | |
| /** | |
| Retrieve the list of legal Target IDs for SCSI devices on a SCSI channel. | |
| @param[in] This A pointer to the EFI_EXT_SCSI_PASS_THRU_PROTOCOL | |
| instance. | |
| @param[in, out] Target (TARGET_MAX_BYTES) of a SCSI device present on | |
| the SCSI channel. On output, a pointer to the | |
| Target ID (an array of TARGET_MAX_BYTES) of the | |
| next SCSI device present on a SCSI channel. | |
| An input value of 0xF(all bytes in the array are 0xF) | |
| in the Target array retrieves the Target ID of the | |
| first SCSI device present on a SCSI channel. | |
| @retval EFI_SUCCESS The Target ID of the next SCSI device on the SCSI | |
| channel was returned in Target. | |
| @retval EFI_INVALID_PARAMETER Target or Lun is NULL. | |
| @retval EFI_TIMEOUT Target array is not all 0xF, and Target was not | |
| returned on a previous call to GetNextTarget(). | |
| @retval EFI_NOT_FOUND There are no more SCSI devices on this SCSI channel. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| IScsiExtScsiPassThruGetNextTarget ( | |
| IN EFI_EXT_SCSI_PASS_THRU_PROTOCOL *This, | |
| IN OUT UINT8 **Target | |
| ); | |
| #endif |