| /** @file | |
| This driver is used to manage SD/MMC PCI host controllers which are compliance | |
| with SD Host Controller Simplified Specification version 3.00 plus the 64-bit | |
| System Addressing support in SD Host Controller Simplified Specification version | |
| 4.20. | |
| It would expose EFI_SD_MMC_PASS_THRU_PROTOCOL for upper layer use. | |
| Copyright (c) 2018-2019, NVIDIA CORPORATION. All rights reserved. | |
| Copyright (c) 2015 - 2020, Intel Corporation. All rights reserved.<BR> | |
| SPDX-License-Identifier: BSD-2-Clause-Patent | |
| **/ | |
| #include "SdMmcPciHcDxe.h" | |
| EDKII_SD_MMC_OVERRIDE *mOverride; | |
| // | |
| // Driver Global Variables | |
| // | |
| EFI_DRIVER_BINDING_PROTOCOL gSdMmcPciHcDriverBinding = { | |
| SdMmcPciHcDriverBindingSupported, | |
| SdMmcPciHcDriverBindingStart, | |
| SdMmcPciHcDriverBindingStop, | |
| 0x10, | |
| NULL, | |
| NULL | |
| }; | |
| #define SLOT_INIT_TEMPLATE {0, UnknownSlot, 0, 0, 0, 0,\ | |
| {EDKII_SD_MMC_BUS_WIDTH_IGNORE,\ | |
| EDKII_SD_MMC_CLOCK_FREQ_IGNORE,\ | |
| {EDKII_SD_MMC_DRIVER_STRENGTH_IGNORE}}} | |
| // | |
| // Template for SD/MMC host controller private data. | |
| // | |
| SD_MMC_HC_PRIVATE_DATA gSdMmcPciHcTemplate = { | |
| SD_MMC_HC_PRIVATE_SIGNATURE, // Signature | |
| NULL, // ControllerHandle | |
| NULL, // PciIo | |
| { // PassThru | |
| sizeof (UINT32), | |
| SdMmcPassThruPassThru, | |
| SdMmcPassThruGetNextSlot, | |
| SdMmcPassThruBuildDevicePath, | |
| SdMmcPassThruGetSlotNumber, | |
| SdMmcPassThruResetDevice | |
| }, | |
| 0, // PciAttributes | |
| 0, // PreviousSlot | |
| NULL, // TimerEvent | |
| NULL, // ConnectEvent | |
| // Queue | |
| INITIALIZE_LIST_HEAD_VARIABLE (gSdMmcPciHcTemplate.Queue), | |
| { // Slot | |
| SLOT_INIT_TEMPLATE, | |
| SLOT_INIT_TEMPLATE, | |
| SLOT_INIT_TEMPLATE, | |
| SLOT_INIT_TEMPLATE, | |
| SLOT_INIT_TEMPLATE, | |
| SLOT_INIT_TEMPLATE | |
| }, | |
| { // Capability | |
| { 0 }, | |
| }, | |
| { // MaxCurrent | |
| 0, | |
| }, | |
| { | |
| 0 // ControllerVersion | |
| } | |
| }; | |
| SD_DEVICE_PATH mSdDpTemplate = { | |
| { | |
| MESSAGING_DEVICE_PATH, | |
| MSG_SD_DP, | |
| { | |
| (UINT8)(sizeof (SD_DEVICE_PATH)), | |
| (UINT8)((sizeof (SD_DEVICE_PATH)) >> 8) | |
| } | |
| }, | |
| 0 | |
| }; | |
| EMMC_DEVICE_PATH mEmmcDpTemplate = { | |
| { | |
| MESSAGING_DEVICE_PATH, | |
| MSG_EMMC_DP, | |
| { | |
| (UINT8)(sizeof (EMMC_DEVICE_PATH)), | |
| (UINT8)((sizeof (EMMC_DEVICE_PATH)) >> 8) | |
| } | |
| }, | |
| 0 | |
| }; | |
| // | |
| // Prioritized function list to detect card type. | |
| // User could add other card detection logic here. | |
| // | |
| CARD_TYPE_DETECT_ROUTINE mCardTypeDetectRoutineTable[] = { | |
| EmmcIdentification, | |
| SdCardIdentification, | |
| NULL | |
| }; | |
| /** | |
| The entry point for SD host controller driver, used to install this driver on the ImageHandle. | |
| @param[in] ImageHandle The firmware allocated handle for this driver image. | |
| @param[in] SystemTable Pointer to the EFI system table. | |
| @retval EFI_SUCCESS Driver loaded. | |
| @retval other Driver not loaded. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| InitializeSdMmcPciHcDxe ( | |
| IN EFI_HANDLE ImageHandle, | |
| IN EFI_SYSTEM_TABLE *SystemTable | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| Status = EfiLibInstallDriverBindingComponentName2 ( | |
| ImageHandle, | |
| SystemTable, | |
| &gSdMmcPciHcDriverBinding, | |
| ImageHandle, | |
| &gSdMmcPciHcComponentName, | |
| &gSdMmcPciHcComponentName2 | |
| ); | |
| ASSERT_EFI_ERROR (Status); | |
| return Status; | |
| } | |
| /** | |
| Call back function when the timer event is signaled. | |
| @param[in] Event The Event this notify function registered to. | |
| @param[in] Context Pointer to the context data registered to the | |
| Event. | |
| **/ | |
| VOID | |
| EFIAPI | |
| ProcessAsyncTaskList ( | |
| IN EFI_EVENT Event, | |
| IN VOID *Context | |
| ) | |
| { | |
| SD_MMC_HC_PRIVATE_DATA *Private; | |
| LIST_ENTRY *Link; | |
| SD_MMC_HC_TRB *Trb; | |
| EFI_STATUS Status; | |
| EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet; | |
| BOOLEAN InfiniteWait; | |
| EFI_EVENT TrbEvent; | |
| Private = (SD_MMC_HC_PRIVATE_DATA *)Context; | |
| // | |
| // Check if the first entry in the async I/O queue is done or not. | |
| // | |
| Status = EFI_SUCCESS; | |
| Trb = NULL; | |
| Link = GetFirstNode (&Private->Queue); | |
| if (!IsNull (&Private->Queue, Link)) { | |
| Trb = SD_MMC_HC_TRB_FROM_THIS (Link); | |
| if (!Private->Slot[Trb->Slot].MediaPresent) { | |
| Status = EFI_NO_MEDIA; | |
| goto Done; | |
| } | |
| if (!Trb->Started) { | |
| // | |
| // Check whether the cmd/data line is ready for transfer. | |
| // | |
| Status = SdMmcCheckTrbEnv (Private, Trb); | |
| if (!EFI_ERROR (Status)) { | |
| Trb->Started = TRUE; | |
| Status = SdMmcExecTrb (Private, Trb); | |
| if (EFI_ERROR (Status)) { | |
| goto Done; | |
| } | |
| } else { | |
| goto Done; | |
| } | |
| } | |
| Status = SdMmcCheckTrbResult (Private, Trb); | |
| } | |
| Done: | |
| if ((Trb != NULL) && (Status == EFI_NOT_READY)) { | |
| Packet = Trb->Packet; | |
| if (Packet->Timeout == 0) { | |
| InfiniteWait = TRUE; | |
| } else { | |
| InfiniteWait = FALSE; | |
| } | |
| if ((!InfiniteWait) && (Trb->Timeout-- == 0)) { | |
| RemoveEntryList (Link); | |
| Trb->Packet->TransactionStatus = EFI_TIMEOUT; | |
| TrbEvent = Trb->Event; | |
| SdMmcFreeTrb (Trb); | |
| DEBUG ((DEBUG_VERBOSE, "ProcessAsyncTaskList(): Signal Event %p EFI_TIMEOUT\n", TrbEvent)); | |
| gBS->SignalEvent (TrbEvent); | |
| return; | |
| } | |
| } else if ((Trb != NULL) && (Status == EFI_CRC_ERROR) && (Trb->Retries > 0)) { | |
| Trb->Retries--; | |
| Trb->Started = FALSE; | |
| } else if ((Trb != NULL)) { | |
| RemoveEntryList (Link); | |
| Trb->Packet->TransactionStatus = Status; | |
| TrbEvent = Trb->Event; | |
| SdMmcFreeTrb (Trb); | |
| DEBUG ((DEBUG_VERBOSE, "ProcessAsyncTaskList(): Signal Event %p with %r\n", TrbEvent, Status)); | |
| gBS->SignalEvent (TrbEvent); | |
| } | |
| return; | |
| } | |
| /** | |
| Sd removable device enumeration callback function when the timer event is signaled. | |
| @param[in] Event The Event this notify function registered to. | |
| @param[in] Context Pointer to the context data registered to the | |
| Event. | |
| **/ | |
| VOID | |
| EFIAPI | |
| SdMmcPciHcEnumerateDevice ( | |
| IN EFI_EVENT Event, | |
| IN VOID *Context | |
| ) | |
| { | |
| SD_MMC_HC_PRIVATE_DATA *Private; | |
| EFI_STATUS Status; | |
| UINT8 Slot; | |
| BOOLEAN MediaPresent; | |
| UINT32 RoutineNum; | |
| CARD_TYPE_DETECT_ROUTINE *Routine; | |
| UINTN Index; | |
| LIST_ENTRY *Link; | |
| LIST_ENTRY *NextLink; | |
| SD_MMC_HC_TRB *Trb; | |
| EFI_TPL OldTpl; | |
| Private = (SD_MMC_HC_PRIVATE_DATA *)Context; | |
| for (Slot = 0; Slot < SD_MMC_HC_MAX_SLOT; Slot++) { | |
| if ((Private->Slot[Slot].Enable) && (Private->Slot[Slot].SlotType == RemovableSlot)) { | |
| Status = SdMmcHcCardDetect (Private->PciIo, Slot, &MediaPresent); | |
| if ((Status == EFI_MEDIA_CHANGED) && !MediaPresent) { | |
| DEBUG ((DEBUG_INFO, "SdMmcPciHcEnumerateDevice: device disconnected at slot %d of pci %p\n", Slot, Private->PciIo)); | |
| Private->Slot[Slot].MediaPresent = FALSE; | |
| Private->Slot[Slot].Initialized = FALSE; | |
| // | |
| // Signal all async task events at the slot with EFI_NO_MEDIA status. | |
| // | |
| OldTpl = gBS->RaiseTPL (TPL_NOTIFY); | |
| for (Link = GetFirstNode (&Private->Queue); | |
| !IsNull (&Private->Queue, Link); | |
| Link = NextLink) | |
| { | |
| NextLink = GetNextNode (&Private->Queue, Link); | |
| Trb = SD_MMC_HC_TRB_FROM_THIS (Link); | |
| if (Trb->Slot == Slot) { | |
| RemoveEntryList (Link); | |
| Trb->Packet->TransactionStatus = EFI_NO_MEDIA; | |
| gBS->SignalEvent (Trb->Event); | |
| SdMmcFreeTrb (Trb); | |
| } | |
| } | |
| gBS->RestoreTPL (OldTpl); | |
| // | |
| // Notify the upper layer the connect state change through ReinstallProtocolInterface. | |
| // | |
| gBS->ReinstallProtocolInterface ( | |
| Private->ControllerHandle, | |
| &gEfiSdMmcPassThruProtocolGuid, | |
| &Private->PassThru, | |
| &Private->PassThru | |
| ); | |
| } | |
| if ((Status == EFI_MEDIA_CHANGED) && MediaPresent) { | |
| DEBUG ((DEBUG_INFO, "SdMmcPciHcEnumerateDevice: device connected at slot %d of pci %p\n", Slot, Private->PciIo)); | |
| // | |
| // Reset the specified slot of the SD/MMC Pci Host Controller | |
| // | |
| Status = SdMmcHcReset (Private, Slot); | |
| if (EFI_ERROR (Status)) { | |
| continue; | |
| } | |
| // | |
| // Reinitialize slot and restart identification process for the new attached device | |
| // | |
| Status = SdMmcHcInitHost (Private, Slot); | |
| if (EFI_ERROR (Status)) { | |
| continue; | |
| } | |
| Private->Slot[Slot].MediaPresent = TRUE; | |
| Private->Slot[Slot].Initialized = TRUE; | |
| RoutineNum = sizeof (mCardTypeDetectRoutineTable) / sizeof (CARD_TYPE_DETECT_ROUTINE); | |
| for (Index = 0; Index < RoutineNum; Index++) { | |
| Routine = &mCardTypeDetectRoutineTable[Index]; | |
| if (*Routine != NULL) { | |
| Status = (*Routine)(Private, Slot); | |
| if (!EFI_ERROR (Status)) { | |
| break; | |
| } | |
| } | |
| } | |
| // | |
| // This card doesn't get initialized correctly. | |
| // | |
| if (Index == RoutineNum) { | |
| Private->Slot[Slot].Initialized = FALSE; | |
| } | |
| // | |
| // Notify the upper layer the connect state change through ReinstallProtocolInterface. | |
| // | |
| gBS->ReinstallProtocolInterface ( | |
| Private->ControllerHandle, | |
| &gEfiSdMmcPassThruProtocolGuid, | |
| &Private->PassThru, | |
| &Private->PassThru | |
| ); | |
| } | |
| } | |
| } | |
| return; | |
| } | |
| /** | |
| Tests to see if this driver supports a given controller. If a child device is provided, | |
| it further tests to see if this driver supports creating a handle for the specified child device. | |
| This function checks to see if the driver specified by This supports the device specified by | |
| ControllerHandle. Drivers will typically use the device path attached to | |
| ControllerHandle and/or the services from the bus I/O abstraction attached to | |
| ControllerHandle to determine if the driver supports ControllerHandle. This function | |
| may be called many times during platform initialization. In order to reduce boot times, the tests | |
| performed by this function must be very small, and take as little time as possible to execute. This | |
| function must not change the state of any hardware devices, and this function must be aware that the | |
| device specified by ControllerHandle may already be managed by the same driver or a | |
| different driver. This function must match its calls to AllocatePages() with FreePages(), | |
| AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol(). | |
| Since ControllerHandle may have been previously started by the same driver, if a protocol is | |
| already in the opened state, then it must not be closed with CloseProtocol(). This is required | |
| to guarantee the state of ControllerHandle is not modified by this function. | |
| @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance. | |
| @param[in] ControllerHandle The handle of the controller to test. This handle | |
| must support a protocol interface that supplies | |
| an I/O abstraction to the driver. | |
| @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This | |
| parameter is ignored by device drivers, and is optional for bus | |
| drivers. For bus drivers, if this parameter is not NULL, then | |
| the bus driver must determine if the bus controller specified | |
| by ControllerHandle and the child controller specified | |
| by RemainingDevicePath are both supported by this | |
| bus driver. | |
| @retval EFI_SUCCESS The device specified by ControllerHandle and | |
| RemainingDevicePath is supported by the driver specified by This. | |
| @retval EFI_ALREADY_STARTED The device specified by ControllerHandle and | |
| RemainingDevicePath is already being managed by the driver | |
| specified by This. | |
| @retval EFI_ACCESS_DENIED The device specified by ControllerHandle and | |
| RemainingDevicePath is already being managed by a different | |
| driver or an application that requires exclusive access. | |
| Currently not implemented. | |
| @retval EFI_UNSUPPORTED The device specified by ControllerHandle and | |
| RemainingDevicePath is not supported by the driver specified by This. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| SdMmcPciHcDriverBindingSupported ( | |
| IN EFI_DRIVER_BINDING_PROTOCOL *This, | |
| IN EFI_HANDLE Controller, | |
| IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath; | |
| EFI_PCI_IO_PROTOCOL *PciIo; | |
| PCI_TYPE00 PciData; | |
| PciIo = NULL; | |
| ParentDevicePath = NULL; | |
| // | |
| // SdPciHcDxe is a device driver, and should ingore the | |
| // "RemainingDevicePath" according to EFI spec. | |
| // | |
| Status = gBS->OpenProtocol ( | |
| Controller, | |
| &gEfiDevicePathProtocolGuid, | |
| (VOID *)&ParentDevicePath, | |
| This->DriverBindingHandle, | |
| Controller, | |
| EFI_OPEN_PROTOCOL_BY_DRIVER | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| // | |
| // EFI_ALREADY_STARTED is also an error. | |
| // | |
| return Status; | |
| } | |
| // | |
| // Close the protocol because we don't use it here. | |
| // | |
| gBS->CloseProtocol ( | |
| Controller, | |
| &gEfiDevicePathProtocolGuid, | |
| This->DriverBindingHandle, | |
| Controller | |
| ); | |
| // | |
| // Now test the EfiPciIoProtocol. | |
| // | |
| Status = gBS->OpenProtocol ( | |
| Controller, | |
| &gEfiPciIoProtocolGuid, | |
| (VOID **)&PciIo, | |
| This->DriverBindingHandle, | |
| Controller, | |
| EFI_OPEN_PROTOCOL_BY_DRIVER | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| return Status; | |
| } | |
| // | |
| // Now further check the PCI header: Base class (offset 0x08) and | |
| // Sub Class (offset 0x05). This controller should be an SD/MMC PCI | |
| // Host Controller. | |
| // | |
| Status = PciIo->Pci.Read ( | |
| PciIo, | |
| EfiPciIoWidthUint8, | |
| 0, | |
| sizeof (PciData), | |
| &PciData | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| gBS->CloseProtocol ( | |
| Controller, | |
| &gEfiPciIoProtocolGuid, | |
| This->DriverBindingHandle, | |
| Controller | |
| ); | |
| return EFI_UNSUPPORTED; | |
| } | |
| // | |
| // Since we already got the PciData, we can close protocol to avoid to carry it | |
| // on for multiple exit points. | |
| // | |
| gBS->CloseProtocol ( | |
| Controller, | |
| &gEfiPciIoProtocolGuid, | |
| This->DriverBindingHandle, | |
| Controller | |
| ); | |
| // | |
| // Examine SD PCI Host Controller PCI Configuration table fields. | |
| // | |
| if ((PciData.Hdr.ClassCode[2] == PCI_CLASS_SYSTEM_PERIPHERAL) && | |
| (PciData.Hdr.ClassCode[1] == PCI_SUBCLASS_SD_HOST_CONTROLLER) && | |
| ((PciData.Hdr.ClassCode[0] == 0x00) || (PciData.Hdr.ClassCode[0] == 0x01))) | |
| { | |
| return EFI_SUCCESS; | |
| } | |
| return EFI_UNSUPPORTED; | |
| } | |
| /** | |
| Starts a device controller or a bus controller. | |
| The Start() function is designed to be invoked from the EFI boot service ConnectController(). | |
| As a result, much of the error checking on the parameters to Start() has been moved into this | |
| common boot service. It is legal to call Start() from other locations, | |
| but the following calling restrictions must be followed or the system behavior will not be deterministic. | |
| 1. ControllerHandle must be a valid EFI_HANDLE. | |
| 2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned | |
| EFI_DEVICE_PATH_PROTOCOL. | |
| 3. Prior to calling Start(), the Supported() function for the driver specified by This must | |
| have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS. | |
| @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance. | |
| @param[in] ControllerHandle The handle of the controller to start. This handle | |
| must support a protocol interface that supplies | |
| an I/O abstraction to the driver. | |
| @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This | |
| parameter is ignored by device drivers, and is optional for bus | |
| drivers. For a bus driver, if this parameter is NULL, then handles | |
| for all the children of Controller are created by this driver. | |
| If this parameter is not NULL and the first Device Path Node is | |
| not the End of Device Path Node, then only the handle for the | |
| child device specified by the first Device Path Node of | |
| RemainingDevicePath is created by this driver. | |
| If the first Device Path Node of RemainingDevicePath is | |
| the End of Device Path Node, no child handle is created by this | |
| driver. | |
| @retval EFI_SUCCESS The device was started. | |
| @retval EFI_DEVICE_ERROR The device could not be started due to a device error.Currently not implemented. | |
| @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. | |
| @retval Others The driver failded to start the device. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| SdMmcPciHcDriverBindingStart ( | |
| IN EFI_DRIVER_BINDING_PROTOCOL *This, | |
| IN EFI_HANDLE Controller, | |
| IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| SD_MMC_HC_PRIVATE_DATA *Private; | |
| EFI_PCI_IO_PROTOCOL *PciIo; | |
| UINT64 Supports; | |
| UINT64 PciAttributes; | |
| UINT8 SlotNum; | |
| UINT8 FirstBar; | |
| UINT8 Slot; | |
| UINT8 Index; | |
| CARD_TYPE_DETECT_ROUTINE *Routine; | |
| UINT32 RoutineNum; | |
| BOOLEAN MediaPresent; | |
| BOOLEAN Support64BitDma; | |
| DEBUG ((DEBUG_INFO, "SdMmcPciHcDriverBindingStart: Start\n")); | |
| // | |
| // Open PCI I/O Protocol and save pointer to open protocol | |
| // in private data area. | |
| // | |
| PciIo = NULL; | |
| Status = gBS->OpenProtocol ( | |
| Controller, | |
| &gEfiPciIoProtocolGuid, | |
| (VOID **)&PciIo, | |
| This->DriverBindingHandle, | |
| Controller, | |
| EFI_OPEN_PROTOCOL_BY_DRIVER | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| return Status; | |
| } | |
| // | |
| // Enable the SD Host Controller MMIO space | |
| // | |
| Private = NULL; | |
| Status = PciIo->Attributes ( | |
| PciIo, | |
| EfiPciIoAttributeOperationGet, | |
| 0, | |
| &PciAttributes | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| goto Done; | |
| } | |
| Status = PciIo->Attributes ( | |
| PciIo, | |
| EfiPciIoAttributeOperationSupported, | |
| 0, | |
| &Supports | |
| ); | |
| if (!EFI_ERROR (Status)) { | |
| Supports &= (UINT64)EFI_PCI_DEVICE_ENABLE; | |
| Status = PciIo->Attributes ( | |
| PciIo, | |
| EfiPciIoAttributeOperationEnable, | |
| Supports, | |
| NULL | |
| ); | |
| } else { | |
| goto Done; | |
| } | |
| Private = AllocateCopyPool (sizeof (SD_MMC_HC_PRIVATE_DATA), &gSdMmcPciHcTemplate); | |
| if (Private == NULL) { | |
| Status = EFI_OUT_OF_RESOURCES; | |
| goto Done; | |
| } | |
| Private->ControllerHandle = Controller; | |
| Private->PciIo = PciIo; | |
| Private->PciAttributes = PciAttributes; | |
| InitializeListHead (&Private->Queue); | |
| // | |
| // Get SD/MMC Pci Host Controller Slot info | |
| // | |
| Status = SdMmcHcGetSlotInfo (PciIo, &FirstBar, &SlotNum); | |
| if (EFI_ERROR (Status)) { | |
| goto Done; | |
| } | |
| // | |
| // Attempt to locate the singleton instance of the SD/MMC override protocol, | |
| // which implements platform specific workarounds for non-standard SDHCI | |
| // implementations. | |
| // | |
| if (mOverride == NULL) { | |
| Status = gBS->LocateProtocol ( | |
| &gEdkiiSdMmcOverrideProtocolGuid, | |
| NULL, | |
| (VOID **)&mOverride | |
| ); | |
| if (!EFI_ERROR (Status)) { | |
| DEBUG (( | |
| DEBUG_INFO, | |
| "%a: found SD/MMC override protocol\n", | |
| __func__ | |
| )); | |
| } | |
| } | |
| Support64BitDma = TRUE; | |
| for (Slot = FirstBar; Slot < (FirstBar + SlotNum); Slot++) { | |
| Private->Slot[Slot].Enable = TRUE; | |
| // | |
| // Get SD/MMC Pci Host Controller Version | |
| // | |
| Status = SdMmcHcGetControllerVersion (PciIo, Slot, &Private->ControllerVersion[Slot]); | |
| if (EFI_ERROR (Status)) { | |
| continue; | |
| } | |
| Status = SdMmcHcGetCapability (PciIo, Slot, &Private->Capability[Slot]); | |
| if (EFI_ERROR (Status)) { | |
| continue; | |
| } | |
| Private->BaseClkFreq[Slot] = Private->Capability[Slot].BaseClkFreq; | |
| if (mOverride != NULL) { | |
| if (mOverride->Capability != NULL) { | |
| Status = mOverride->Capability ( | |
| Controller, | |
| Slot, | |
| &Private->Capability[Slot], | |
| &Private->BaseClkFreq[Slot] | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| DEBUG (( | |
| DEBUG_WARN, | |
| "%a: Failed to override capability - %r\n", | |
| __func__, | |
| Status | |
| )); | |
| continue; | |
| } | |
| } | |
| if (mOverride->NotifyPhase != NULL) { | |
| Status = mOverride->NotifyPhase ( | |
| Controller, | |
| Slot, | |
| EdkiiSdMmcGetOperatingParam, | |
| (VOID *)&Private->Slot[Slot].OperatingParameters | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| DEBUG ((DEBUG_WARN, "%a: Failed to get operating parameters, using defaults\n", __func__)); | |
| } | |
| } | |
| } | |
| DumpCapabilityReg (Slot, &Private->Capability[Slot]); | |
| DEBUG (( | |
| DEBUG_INFO, | |
| "Slot[%d] Base Clock Frequency: %dMHz\n", | |
| Slot, | |
| Private->BaseClkFreq[Slot] | |
| )); | |
| // | |
| // If any of the slots does not support 64b system bus | |
| // do not enable 64b DMA in the PCI layer. | |
| // | |
| if (((Private->ControllerVersion[Slot] == SD_MMC_HC_CTRL_VER_300) && | |
| (Private->Capability[Slot].SysBus64V3 == 0)) || | |
| ((Private->ControllerVersion[Slot] == SD_MMC_HC_CTRL_VER_400) && | |
| (Private->Capability[Slot].SysBus64V3 == 0)) || | |
| ((Private->ControllerVersion[Slot] >= SD_MMC_HC_CTRL_VER_410) && | |
| (Private->Capability[Slot].SysBus64V4 == 0))) | |
| { | |
| Support64BitDma = FALSE; | |
| } | |
| Status = SdMmcHcGetMaxCurrent (PciIo, Slot, &Private->MaxCurrent[Slot]); | |
| if (EFI_ERROR (Status)) { | |
| continue; | |
| } | |
| Private->Slot[Slot].SlotType = Private->Capability[Slot].SlotType; | |
| if ((Private->Slot[Slot].SlotType != RemovableSlot) && (Private->Slot[Slot].SlotType != EmbeddedSlot)) { | |
| DEBUG ((DEBUG_INFO, "SdMmcPciHcDxe doesn't support the slot type [%d]!!!\n", Private->Slot[Slot].SlotType)); | |
| continue; | |
| } | |
| // | |
| // Reset the specified slot of the SD/MMC Pci Host Controller | |
| // | |
| Status = SdMmcHcReset (Private, Slot); | |
| if (EFI_ERROR (Status)) { | |
| continue; | |
| } | |
| // | |
| // Check whether there is a SD/MMC card attached | |
| // | |
| if (Private->Slot[Slot].SlotType == RemovableSlot) { | |
| Status = SdMmcHcCardDetect (PciIo, Slot, &MediaPresent); | |
| if (EFI_ERROR (Status) && (Status != EFI_MEDIA_CHANGED)) { | |
| continue; | |
| } else if (!MediaPresent) { | |
| DEBUG (( | |
| DEBUG_INFO, | |
| "SdMmcHcCardDetect: No device attached in Slot[%d]!!!\n", | |
| Slot | |
| )); | |
| continue; | |
| } | |
| } | |
| Status = SdMmcHcInitHost (Private, Slot); | |
| if (EFI_ERROR (Status)) { | |
| continue; | |
| } | |
| Private->Slot[Slot].MediaPresent = TRUE; | |
| Private->Slot[Slot].Initialized = TRUE; | |
| RoutineNum = sizeof (mCardTypeDetectRoutineTable) / sizeof (CARD_TYPE_DETECT_ROUTINE); | |
| for (Index = 0; Index < RoutineNum; Index++) { | |
| Routine = &mCardTypeDetectRoutineTable[Index]; | |
| if (*Routine != NULL) { | |
| Status = (*Routine)(Private, Slot); | |
| if (!EFI_ERROR (Status)) { | |
| break; | |
| } | |
| } | |
| } | |
| // | |
| // This card doesn't get initialized correctly. | |
| // | |
| if (Index == RoutineNum) { | |
| Private->Slot[Slot].Initialized = FALSE; | |
| } | |
| } | |
| // | |
| // Enable 64-bit DMA support in the PCI layer if this controller | |
| // supports it. | |
| // | |
| if (Support64BitDma) { | |
| Status = PciIo->Attributes ( | |
| PciIo, | |
| EfiPciIoAttributeOperationEnable, | |
| EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE, | |
| NULL | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| DEBUG ((DEBUG_WARN, "SdMmcPciHcDriverBindingStart: failed to enable 64-bit DMA (%r)\n", Status)); | |
| } | |
| } | |
| // | |
| // Start the asynchronous I/O monitor | |
| // | |
| Status = gBS->CreateEvent ( | |
| EVT_TIMER | EVT_NOTIFY_SIGNAL, | |
| TPL_NOTIFY, | |
| ProcessAsyncTaskList, | |
| Private, | |
| &Private->TimerEvent | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| goto Done; | |
| } | |
| Status = gBS->SetTimer (Private->TimerEvent, TimerPeriodic, SD_MMC_HC_ASYNC_TIMER); | |
| if (EFI_ERROR (Status)) { | |
| goto Done; | |
| } | |
| // | |
| // Start the Sd removable device connection enumeration | |
| // | |
| Status = gBS->CreateEvent ( | |
| EVT_TIMER | EVT_NOTIFY_SIGNAL, | |
| TPL_CALLBACK, | |
| SdMmcPciHcEnumerateDevice, | |
| Private, | |
| &Private->ConnectEvent | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| goto Done; | |
| } | |
| Status = gBS->SetTimer (Private->ConnectEvent, TimerPeriodic, SD_MMC_HC_ENUM_TIMER); | |
| if (EFI_ERROR (Status)) { | |
| goto Done; | |
| } | |
| Status = gBS->InstallMultipleProtocolInterfaces ( | |
| &Controller, | |
| &gEfiSdMmcPassThruProtocolGuid, | |
| &(Private->PassThru), | |
| NULL | |
| ); | |
| DEBUG ((DEBUG_INFO, "SdMmcPciHcDriverBindingStart: %r End on %x\n", Status, Controller)); | |
| Done: | |
| if (EFI_ERROR (Status)) { | |
| if ((Private != NULL) && (Private->PciAttributes != 0)) { | |
| // | |
| // Restore original PCI attributes | |
| // | |
| PciIo->Attributes ( | |
| PciIo, | |
| EfiPciIoAttributeOperationSet, | |
| Private->PciAttributes, | |
| NULL | |
| ); | |
| } | |
| gBS->CloseProtocol ( | |
| Controller, | |
| &gEfiPciIoProtocolGuid, | |
| This->DriverBindingHandle, | |
| Controller | |
| ); | |
| if ((Private != NULL) && (Private->TimerEvent != NULL)) { | |
| gBS->CloseEvent (Private->TimerEvent); | |
| } | |
| if ((Private != NULL) && (Private->ConnectEvent != NULL)) { | |
| gBS->CloseEvent (Private->ConnectEvent); | |
| } | |
| if (Private != NULL) { | |
| FreePool (Private); | |
| } | |
| } | |
| return Status; | |
| } | |
| /** | |
| Stops a device controller or a bus controller. | |
| The Stop() function is designed to be invoked from the EFI boot service DisconnectController(). | |
| As a result, much of the error checking on the parameters to Stop() has been moved | |
| into this common boot service. It is legal to call Stop() from other locations, | |
| but the following calling restrictions must be followed or the system behavior will not be deterministic. | |
| 1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this | |
| same driver's Start() function. | |
| 2. The first NumberOfChildren handles of ChildHandleBuffer must all be a valid | |
| EFI_HANDLE. In addition, all of these handles must have been created in this driver's | |
| Start() function, and the Start() function must have called OpenProtocol() on | |
| ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER. | |
| @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance. | |
| @param[in] ControllerHandle A handle to the device being stopped. The handle must | |
| support a bus specific I/O protocol for the driver | |
| to use to stop the device. | |
| @param[in] NumberOfChildren The number of child device handles in ChildHandleBuffer. | |
| @param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL | |
| if NumberOfChildren is 0. | |
| @retval EFI_SUCCESS The device was stopped. | |
| @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| SdMmcPciHcDriverBindingStop ( | |
| IN EFI_DRIVER_BINDING_PROTOCOL *This, | |
| IN EFI_HANDLE Controller, | |
| IN UINTN NumberOfChildren, | |
| IN EFI_HANDLE *ChildHandleBuffer | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru; | |
| SD_MMC_HC_PRIVATE_DATA *Private; | |
| EFI_PCI_IO_PROTOCOL *PciIo; | |
| LIST_ENTRY *Link; | |
| LIST_ENTRY *NextLink; | |
| SD_MMC_HC_TRB *Trb; | |
| DEBUG ((DEBUG_INFO, "SdMmcPciHcDriverBindingStop: Start\n")); | |
| Status = gBS->OpenProtocol ( | |
| Controller, | |
| &gEfiSdMmcPassThruProtocolGuid, | |
| (VOID **)&PassThru, | |
| This->DriverBindingHandle, | |
| Controller, | |
| EFI_OPEN_PROTOCOL_GET_PROTOCOL | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| return Status; | |
| } | |
| Private = SD_MMC_HC_PRIVATE_FROM_THIS (PassThru); | |
| // | |
| // Close Non-Blocking timer and free Task list. | |
| // | |
| if (Private->TimerEvent != NULL) { | |
| gBS->CloseEvent (Private->TimerEvent); | |
| Private->TimerEvent = NULL; | |
| } | |
| if (Private->ConnectEvent != NULL) { | |
| gBS->CloseEvent (Private->ConnectEvent); | |
| Private->ConnectEvent = NULL; | |
| } | |
| // | |
| // As the timer is closed, there is no needs to use TPL lock to | |
| // protect the critical region "queue". | |
| // | |
| for (Link = GetFirstNode (&Private->Queue); | |
| !IsNull (&Private->Queue, Link); | |
| Link = NextLink) | |
| { | |
| NextLink = GetNextNode (&Private->Queue, Link); | |
| RemoveEntryList (Link); | |
| Trb = SD_MMC_HC_TRB_FROM_THIS (Link); | |
| Trb->Packet->TransactionStatus = EFI_ABORTED; | |
| gBS->SignalEvent (Trb->Event); | |
| SdMmcFreeTrb (Trb); | |
| } | |
| // | |
| // Uninstall Block I/O protocol from the device handle | |
| // | |
| Status = gBS->UninstallProtocolInterface ( | |
| Controller, | |
| &gEfiSdMmcPassThruProtocolGuid, | |
| &(Private->PassThru) | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| return Status; | |
| } | |
| gBS->CloseProtocol ( | |
| Controller, | |
| &gEfiPciIoProtocolGuid, | |
| This->DriverBindingHandle, | |
| Controller | |
| ); | |
| // | |
| // Restore original PCI attributes | |
| // | |
| PciIo = Private->PciIo; | |
| Status = PciIo->Attributes ( | |
| PciIo, | |
| EfiPciIoAttributeOperationSet, | |
| Private->PciAttributes, | |
| NULL | |
| ); | |
| ASSERT_EFI_ERROR (Status); | |
| FreePool (Private); | |
| DEBUG ((DEBUG_INFO, "SdMmcPciHcDriverBindingStop: End with %r\n", Status)); | |
| return Status; | |
| } | |
| /** | |
| Execute TRB synchronously. | |
| @param[in] Private Pointer to driver private data. | |
| @param[in] Trb Pointer to TRB to execute. | |
| @retval EFI_SUCCESS TRB executed successfully. | |
| @retval Other TRB failed. | |
| **/ | |
| EFI_STATUS | |
| SdMmcPassThruExecSyncTrb ( | |
| IN SD_MMC_HC_PRIVATE_DATA *Private, | |
| IN SD_MMC_HC_TRB *Trb | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| EFI_TPL OldTpl; | |
| // | |
| // Wait async I/O list is empty before execute sync I/O operation. | |
| // | |
| while (TRUE) { | |
| OldTpl = gBS->RaiseTPL (TPL_NOTIFY); | |
| if (IsListEmpty (&Private->Queue)) { | |
| gBS->RestoreTPL (OldTpl); | |
| break; | |
| } | |
| gBS->RestoreTPL (OldTpl); | |
| } | |
| while (Trb->Retries) { | |
| Status = SdMmcWaitTrbEnv (Private, Trb); | |
| if (EFI_ERROR (Status)) { | |
| return Status; | |
| } | |
| Status = SdMmcExecTrb (Private, Trb); | |
| if (EFI_ERROR (Status)) { | |
| return Status; | |
| } | |
| Status = SdMmcWaitTrbResult (Private, Trb); | |
| if (Status == EFI_CRC_ERROR) { | |
| Trb->Retries--; | |
| } else { | |
| return Status; | |
| } | |
| } | |
| return Status; | |
| } | |
| /** | |
| Sends SD command to an SD card that is attached to the SD controller. | |
| The PassThru() function sends the SD command specified by Packet to the SD card | |
| specified by Slot. | |
| If Packet is successfully sent to the SD card, then EFI_SUCCESS is returned. | |
| If a device error occurs while sending the Packet, then EFI_DEVICE_ERROR is returned. | |
| If Slot is not in a valid range for the SD controller, then EFI_INVALID_PARAMETER | |
| is returned. | |
| If Packet defines a data command but both InDataBuffer and OutDataBuffer are NULL, | |
| EFI_INVALID_PARAMETER is returned. | |
| @param[in] This A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance. | |
| @param[in] Slot The slot number of the SD card to send the command to. | |
| @param[in,out] Packet A pointer to the SD command data structure. | |
| @param[in] Event If Event is NULL, blocking I/O is performed. If Event is | |
| not NULL, then nonblocking I/O is performed, and Event | |
| will be signaled when the Packet completes. | |
| @retval EFI_SUCCESS The SD Command Packet was sent by the host. | |
| @retval EFI_DEVICE_ERROR A device error occurred while attempting to send the SD | |
| command Packet. | |
| @retval EFI_INVALID_PARAMETER Packet, Slot, or the contents of the Packet is invalid. | |
| @retval EFI_INVALID_PARAMETER Packet defines a data command but both InDataBuffer and | |
| OutDataBuffer are NULL. | |
| @retval EFI_NO_MEDIA SD Device not present in the Slot. | |
| @retval EFI_UNSUPPORTED The command described by the SD Command Packet is not | |
| supported by the host controller. | |
| @retval EFI_BAD_BUFFER_SIZE The InTransferLength or OutTransferLength exceeds the | |
| limit supported by SD card ( i.e. if the number of bytes | |
| exceed the Last LBA). | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| SdMmcPassThruPassThru ( | |
| IN EFI_SD_MMC_PASS_THRU_PROTOCOL *This, | |
| IN UINT8 Slot, | |
| IN OUT EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet, | |
| IN EFI_EVENT Event OPTIONAL | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| SD_MMC_HC_PRIVATE_DATA *Private; | |
| SD_MMC_HC_TRB *Trb; | |
| if ((This == NULL) || (Packet == NULL)) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| if ((Packet->SdMmcCmdBlk == NULL) || (Packet->SdMmcStatusBlk == NULL)) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| if ((Packet->OutDataBuffer == NULL) && (Packet->OutTransferLength != 0)) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| if ((Packet->InDataBuffer == NULL) && (Packet->InTransferLength != 0)) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| Private = SD_MMC_HC_PRIVATE_FROM_THIS (This); | |
| if (!Private->Slot[Slot].Enable) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| if (!Private->Slot[Slot].MediaPresent) { | |
| return EFI_NO_MEDIA; | |
| } | |
| if (!Private->Slot[Slot].Initialized) { | |
| return EFI_DEVICE_ERROR; | |
| } | |
| Trb = SdMmcCreateTrb (Private, Slot, Packet, Event); | |
| if (Trb == NULL) { | |
| return EFI_OUT_OF_RESOURCES; | |
| } | |
| // | |
| // Immediately return for async I/O. | |
| // | |
| if (Event != NULL) { | |
| return EFI_SUCCESS; | |
| } | |
| Status = SdMmcPassThruExecSyncTrb (Private, Trb); | |
| SdMmcFreeTrb (Trb); | |
| return Status; | |
| } | |
| /** | |
| Used to retrieve next slot numbers supported by the SD controller. The function | |
| returns information about all available slots (populated or not-populated). | |
| The GetNextSlot() function retrieves the next slot number on an SD controller. | |
| If on input Slot is 0xFF, then the slot number of the first slot on the SD controller | |
| is returned. | |
| If Slot is a slot number that was returned on a previous call to GetNextSlot(), then | |
| the slot number of the next slot on the SD controller is returned. | |
| If Slot is not 0xFF and Slot was not returned on a previous call to GetNextSlot(), | |
| EFI_INVALID_PARAMETER is returned. | |
| If Slot is the slot number of the last slot on the SD controller, then EFI_NOT_FOUND | |
| is returned. | |
| @param[in] This A pointer to the EFI_SD_MMMC_PASS_THRU_PROTOCOL instance. | |
| @param[in,out] Slot On input, a pointer to a slot number on the SD controller. | |
| On output, a pointer to the next slot number on the SD controller. | |
| An input value of 0xFF retrieves the first slot number on the SD | |
| controller. | |
| @retval EFI_SUCCESS The next slot number on the SD controller was returned in Slot. | |
| @retval EFI_NOT_FOUND There are no more slots on this SD controller. | |
| @retval EFI_INVALID_PARAMETER Slot is not 0xFF and Slot was not returned on a previous call | |
| to GetNextSlot(). | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| SdMmcPassThruGetNextSlot ( | |
| IN EFI_SD_MMC_PASS_THRU_PROTOCOL *This, | |
| IN OUT UINT8 *Slot | |
| ) | |
| { | |
| SD_MMC_HC_PRIVATE_DATA *Private; | |
| UINT8 Index; | |
| if ((This == NULL) || (Slot == NULL)) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| Private = SD_MMC_HC_PRIVATE_FROM_THIS (This); | |
| if (*Slot == 0xFF) { | |
| for (Index = 0; Index < SD_MMC_HC_MAX_SLOT; Index++) { | |
| if (Private->Slot[Index].Enable) { | |
| *Slot = Index; | |
| Private->PreviousSlot = Index; | |
| return EFI_SUCCESS; | |
| } | |
| } | |
| return EFI_NOT_FOUND; | |
| } else if (*Slot == Private->PreviousSlot) { | |
| for (Index = *Slot + 1; Index < SD_MMC_HC_MAX_SLOT; Index++) { | |
| if (Private->Slot[Index].Enable) { | |
| *Slot = Index; | |
| Private->PreviousSlot = Index; | |
| return EFI_SUCCESS; | |
| } | |
| } | |
| return EFI_NOT_FOUND; | |
| } else { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| } | |
| /** | |
| Used to allocate and build a device path node for an SD card on the SD controller. | |
| The BuildDevicePath() function allocates and builds a single device node for the SD | |
| card specified by Slot. | |
| If the SD card specified by Slot is not present on the SD controller, then EFI_NOT_FOUND | |
| is returned. | |
| If DevicePath is NULL, then EFI_INVALID_PARAMETER is returned. | |
| If there are not enough resources to allocate the device path node, then EFI_OUT_OF_RESOURCES | |
| is returned. | |
| Otherwise, DevicePath is allocated with the boot service AllocatePool(), the contents of | |
| DevicePath are initialized to describe the SD card specified by Slot, and EFI_SUCCESS is | |
| returned. | |
| @param[in] This A pointer to the EFI_SD_MMMC_PASS_THRU_PROTOCOL instance. | |
| @param[in] Slot Specifies the slot number of the SD card for which a device | |
| path node is to be allocated and built. | |
| @param[in,out] DevicePath A pointer to a single device path node that describes the SD | |
| card specified by Slot. This function is responsible for | |
| allocating the buffer DevicePath with the boot service | |
| AllocatePool(). It is the caller's responsibility to free | |
| DevicePath when the caller is finished with DevicePath. | |
| @retval EFI_SUCCESS The device path node that describes the SD card specified by | |
| Slot was allocated and returned in DevicePath. | |
| @retval EFI_NOT_FOUND The SD card specified by Slot does not exist on the SD controller. | |
| @retval EFI_INVALID_PARAMETER DevicePath is NULL. | |
| @retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate DevicePath. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| SdMmcPassThruBuildDevicePath ( | |
| IN EFI_SD_MMC_PASS_THRU_PROTOCOL *This, | |
| IN UINT8 Slot, | |
| IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath | |
| ) | |
| { | |
| SD_MMC_HC_PRIVATE_DATA *Private; | |
| SD_DEVICE_PATH *SdNode; | |
| EMMC_DEVICE_PATH *EmmcNode; | |
| if ((This == NULL) || (DevicePath == NULL) || (Slot >= SD_MMC_HC_MAX_SLOT)) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| Private = SD_MMC_HC_PRIVATE_FROM_THIS (This); | |
| if ((!Private->Slot[Slot].Enable) || (!Private->Slot[Slot].MediaPresent)) { | |
| return EFI_NOT_FOUND; | |
| } | |
| if (Private->Slot[Slot].CardType == SdCardType) { | |
| SdNode = AllocateCopyPool (sizeof (SD_DEVICE_PATH), &mSdDpTemplate); | |
| if (SdNode == NULL) { | |
| return EFI_OUT_OF_RESOURCES; | |
| } | |
| SdNode->SlotNumber = Slot; | |
| *DevicePath = (EFI_DEVICE_PATH_PROTOCOL *)SdNode; | |
| } else if (Private->Slot[Slot].CardType == EmmcCardType) { | |
| EmmcNode = AllocateCopyPool (sizeof (EMMC_DEVICE_PATH), &mEmmcDpTemplate); | |
| if (EmmcNode == NULL) { | |
| return EFI_OUT_OF_RESOURCES; | |
| } | |
| EmmcNode->SlotNumber = Slot; | |
| *DevicePath = (EFI_DEVICE_PATH_PROTOCOL *)EmmcNode; | |
| } else { | |
| // | |
| // Currently we only support SD and EMMC two device nodes. | |
| // | |
| return EFI_NOT_FOUND; | |
| } | |
| return EFI_SUCCESS; | |
| } | |
| /** | |
| This function retrieves an SD card slot number based on the input device path. | |
| The GetSlotNumber() function retrieves slot number for the SD card specified by | |
| the DevicePath node. If DevicePath is NULL, EFI_INVALID_PARAMETER is returned. | |
| If DevicePath is not a device path node type that the SD Pass Thru driver supports, | |
| EFI_UNSUPPORTED is returned. | |
| @param[in] This A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance. | |
| @param[in] DevicePath A pointer to the device path node that describes a SD | |
| card on the SD controller. | |
| @param[out] Slot On return, points to the slot number of an SD card on | |
| the SD controller. | |
| @retval EFI_SUCCESS SD card slot number is returned in Slot. | |
| @retval EFI_INVALID_PARAMETER Slot or DevicePath is NULL. | |
| @retval EFI_UNSUPPORTED DevicePath is not a device path node type that the SD | |
| Pass Thru driver supports. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| SdMmcPassThruGetSlotNumber ( | |
| IN EFI_SD_MMC_PASS_THRU_PROTOCOL *This, | |
| IN EFI_DEVICE_PATH_PROTOCOL *DevicePath, | |
| OUT UINT8 *Slot | |
| ) | |
| { | |
| SD_MMC_HC_PRIVATE_DATA *Private; | |
| SD_DEVICE_PATH *SdNode; | |
| EMMC_DEVICE_PATH *EmmcNode; | |
| UINT8 SlotNumber; | |
| if ((This == NULL) || (DevicePath == NULL) || (Slot == NULL)) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| Private = SD_MMC_HC_PRIVATE_FROM_THIS (This); | |
| // | |
| // Check whether the DevicePath belongs to SD_DEVICE_PATH or EMMC_DEVICE_PATH | |
| // | |
| if ((DevicePath->Type != MESSAGING_DEVICE_PATH) || | |
| ((DevicePath->SubType != MSG_SD_DP) && | |
| (DevicePath->SubType != MSG_EMMC_DP)) || | |
| (DevicePathNodeLength (DevicePath) != sizeof (SD_DEVICE_PATH)) || | |
| (DevicePathNodeLength (DevicePath) != sizeof (EMMC_DEVICE_PATH))) | |
| { | |
| return EFI_UNSUPPORTED; | |
| } | |
| if (DevicePath->SubType == MSG_SD_DP) { | |
| SdNode = (SD_DEVICE_PATH *)DevicePath; | |
| SlotNumber = SdNode->SlotNumber; | |
| } else { | |
| EmmcNode = (EMMC_DEVICE_PATH *)DevicePath; | |
| SlotNumber = EmmcNode->SlotNumber; | |
| } | |
| if (SlotNumber >= SD_MMC_HC_MAX_SLOT) { | |
| return EFI_NOT_FOUND; | |
| } | |
| if (Private->Slot[SlotNumber].Enable) { | |
| *Slot = SlotNumber; | |
| return EFI_SUCCESS; | |
| } else { | |
| return EFI_NOT_FOUND; | |
| } | |
| } | |
| /** | |
| Resets an SD card that is connected to the SD controller. | |
| The ResetDevice() function resets the SD card specified by Slot. | |
| If this SD controller does not support a device reset operation, EFI_UNSUPPORTED is | |
| returned. | |
| If Slot is not in a valid slot number for this SD controller, EFI_INVALID_PARAMETER | |
| is returned. | |
| If the device reset operation is completed, EFI_SUCCESS is returned. | |
| @param[in] This A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance. | |
| @param[in] Slot Specifies the slot number of the SD card to be reset. | |
| @retval EFI_SUCCESS The SD card specified by Slot was reset. | |
| @retval EFI_UNSUPPORTED The SD controller does not support a device reset operation. | |
| @retval EFI_INVALID_PARAMETER Slot number is invalid. | |
| @retval EFI_NO_MEDIA SD Device not present in the Slot. | |
| @retval EFI_DEVICE_ERROR The reset command failed due to a device error | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| SdMmcPassThruResetDevice ( | |
| IN EFI_SD_MMC_PASS_THRU_PROTOCOL *This, | |
| IN UINT8 Slot | |
| ) | |
| { | |
| SD_MMC_HC_PRIVATE_DATA *Private; | |
| LIST_ENTRY *Link; | |
| LIST_ENTRY *NextLink; | |
| SD_MMC_HC_TRB *Trb; | |
| EFI_TPL OldTpl; | |
| if (This == NULL) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| Private = SD_MMC_HC_PRIVATE_FROM_THIS (This); | |
| if (!Private->Slot[Slot].Enable) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| if (!Private->Slot[Slot].MediaPresent) { | |
| return EFI_NO_MEDIA; | |
| } | |
| if (!Private->Slot[Slot].Initialized) { | |
| return EFI_DEVICE_ERROR; | |
| } | |
| // | |
| // Free all async I/O requests in the queue | |
| // | |
| OldTpl = gBS->RaiseTPL (TPL_NOTIFY); | |
| for (Link = GetFirstNode (&Private->Queue); | |
| !IsNull (&Private->Queue, Link); | |
| Link = NextLink) | |
| { | |
| NextLink = GetNextNode (&Private->Queue, Link); | |
| RemoveEntryList (Link); | |
| Trb = SD_MMC_HC_TRB_FROM_THIS (Link); | |
| Trb->Packet->TransactionStatus = EFI_ABORTED; | |
| gBS->SignalEvent (Trb->Event); | |
| SdMmcFreeTrb (Trb); | |
| } | |
| gBS->RestoreTPL (OldTpl); | |
| return EFI_SUCCESS; | |
| } |