| // /** | |
| // | |
| // Copyright (c) 2010 - 2018, Intel Corporation. All rights reserved.<BR> | |
| // (C) Copyright 2013-2015 Hewlett-Packard Development Company, L.P.<BR> | |
| // (C) Copyright 2016 - 2019 Hewlett Packard Enterprise Development LP<BR> | |
| // SPDX-License-Identifier: BSD-2-Clause-Patent | |
| // | |
| // Module Name: | |
| // | |
| // UefiShellDebug1CommandsLib.uni | |
| // | |
| // Abstract: | |
| // | |
| // String definitions for UEFI Shell 2.0 Debug1 profile commands | |
| // | |
| // | |
| // **/ | |
| /=# | |
| #langdef en-US "english" | |
| #string STR_GEN_NO_MEM #language en-US "%H%s%N: Memory is not available.\r\n" | |
| #string STR_GEN_BOOT_ONLY #language en-US "%H%s%N: Boot must be selected for hot key options.\r\n" | |
| #string STR_GEN_FIND_FAIL #language en-US "%H%s%N: File not found - '%H%s%N'\r\n" | |
| #string STR_GEN_PROBLEM #language en-US "%H%s%N: Unknown flag - '%H%s%N'\r\n" | |
| #string STR_GEN_PROBLEM_VAL #language en-US "%H%s%N: Bad value - '%H%s%N' for flag - '%H%s%N'\r\n" | |
| #string STR_GEN_DUPLICATE #language en-US "%H%s%N: Duplicate flag - '%H%s%N'\r\n" | |
| #string STR_GEN_NO_VALUE #language en-US "%H%s%N: Missing argument for flag - '%H%s%N'\r\n" | |
| #string STR_GEN_TOO_FEW #language en-US "%H%s%N: Too few arguments.\r\n" | |
| #string STR_GEN_TOO_MANY #language en-US "%H%s%N: Too many arguments.\r\n" | |
| #string STR_GEN_NO_DRIVER_BOOT #language en-US "%H%s%N: Driver or Boot must be selected.\r\n" | |
| #string STR_GEN_PCIRBIO_NF #language en-US "%H%s%N: Protocol - PciRootBridgeIo not found.\r\n" | |
| #string STR_GEN_PCIRBIO_ER #language en-US "%H%s%N: Problem accessing the data using Protocol - PciRootBridgeIo\r\n" | |
| #string STR_GEN_PARAM_INV #language en-US "%H%s%N: Invalid argument - '%H%s%N'\r\n" | |
| #string STR_GEN_PARAM_INV_HEX #language en-US "%H%s%N: Invalid parameter - '%H%s%N'. Must be hexadecimal.\r\n" | |
| #string STR_GEN_PARAM_CONFLICT #language en-US "%H%s%N: Flags conflict with - '%H%s%N' and '%H%s%N'\r\n" | |
| #string STR_GEN_OUT_MEM #language en-US "%H%s%N: Memory allocation was not successful.\r\n" | |
| #string STR_GEN_MAP_PROTOCOL #language en-US "%H%s%N: Mapped device '%B%s%N' does not have protocol %B%s%N\r\n" | |
| #string STR_GEN_FILE_OPEN_FAIL #language en-US "%H%s%N: Cannot open file - '%H%s%N'\r\n" | |
| #string STR_GEN_FILE_DELETE_FAIL #language en-US "%H%s%N: Cannot delete file - '%H%s%N'\r\n" | |
| #string STR_GEN_NO_CWD #language en-US "%H%s%N: Current directory not specified.\r\n" | |
| #string STR_GEN_FILE_IS_DIRECTORY #language en-US "%H%s%N: The file '%H%s%N' is a directory.\r\n" | |
| #string STR_GEN_SFO_HEADER #language en-US "ShellCommand,"%s"\r\n" | |
| #string STR_FILE_OPEN_FAIL #language en-US "Unable to open file on '%B%s%N' with: %r.\r\n" | |
| #string STR_FILE_FIND_FAIL #language en-US "%H%s%N: File not found - '%H%s%N'\r\n" | |
| #string STR_FILE_NOT_DIR #language en-US "%H%s%N: Directories are not permitted - '%H%s%N'\r\n" | |
| #string STR_SIZE_NOT_SPEC #language en-US "%H%s%N: A valid size must be specified\r\n" | |
| #string STR_FILE_NOT_SPEC #language en-US "%H%s%N: File not specified\r\n" | |
| #string STR_FILE_WRITE_FAIL #language en-US "%H%s%N: Write file error - '%H%s%N'\r\n" | |
| #string STR_FILE_READ_FAIL #language en-US "%H%s%N: Read file error - '%H%s%N'\r\n" | |
| #string STR_VOLUME_FULL #language en-US "%H%s%N: The volume is full\r\n" | |
| #string STR_SET_SIZE_FAIL #language en-US "%H%s%N: Unable to change size on '%B%s%N'\r\n" | |
| #string STR_SET_SIZE_DONE #language en-US "Size changed on '%B%s%N'.\r\n" | |
| #string STR_DBLK_HEADER #language en-US "LBA %016LX Size %08x bytes BlkIo %0x\r\n" | |
| #string STR_COMP_HEADER #language en-US "Compare %s to %s.\r\n" | |
| #string STR_COMP_DIFFERENCE_POINT #language en-US "Difference #% 2u:\r\n" | |
| #string STR_COMP_END_OF_FILE #language en-US " <EOF>" | |
| #string STR_COMP_FOOTER_FAIL #language en-US "[difference(s) encountered] \r\n" | |
| #string STR_COMP_FOOTER_PASS #language en-US "[no differences encountered]\r\n" | |
| #string STR_MODE_SET_FAIL #language en-US "%H%s%N: Unable to change the mode.\r\n" | |
| #string STR_MODE_NO_MATCH #language en-US "%H%s%N: No matching mode found to set\r\n" | |
| #string STR_MODE_LIST_HEAD #language en-US "Available modes for console output device.\r\n" | |
| #string STR_MODE_LIST_ITEM #language en-US " Col % 5d Row % 5d %c\r\n" | |
| #string STR_MEMMAP_GET_FAILED #language en-US "%H%s%N: Unable to get memory map\r\n" | |
| #string STR_MEMMAP_LIST_HEAD #language en-US "Type Start End # Pages Attributes\r\n" | |
| #string STR_MEMMAP_LIST_ITEM #language en-US "% -10s %016LX-%016LX %016LX %016LX\r\n" | |
| #string STR_MEMMAP_LIST_ITEM_OTHER #language en-US "%08x %016LX-%016LX %016LX %016LX\r\n" | |
| #string STR_MEMMAP_LIST_SUMM #language en-US " \r\n" | |
| " Reserved : %,14ld Pages (%,ld Bytes)\r\n" | |
| " LoaderCode: %,14ld Pages (%,ld Bytes)\r\n" | |
| " LoaderData: %,14ld Pages (%,ld Bytes)\r\n" | |
| " BS_Code : %,14ld Pages (%,ld Bytes)\r\n" | |
| " BS_Data : %,14ld Pages (%,ld Bytes)\r\n" | |
| " RT_Code : %,14ld Pages (%,ld Bytes)\r\n" | |
| " RT_Data : %,14ld Pages (%,ld Bytes)\r\n" | |
| " ACPI_Recl : %,14ld Pages (%,ld Bytes)\r\n" | |
| " ACPI_NVS : %,14ld Pages (%,ld Bytes)\r\n" | |
| " MMIO : %,14ld Pages (%,ld Bytes)\r\n" | |
| " MMIO_Port : %,14ld Pages (%,ld Bytes)\r\n" | |
| " PalCode : %,14ld Pages (%,ld Bytes)\r\n" | |
| " Unaccepted: %,14ld Pages (%,ld Bytes)\r\n" | |
| " Available : %,14ld Pages (%,ld Bytes)\r\n" | |
| " Persistent: %,14ld Pages (%,ld Bytes)\r\n" | |
| #string STR_MEMMAP_LIST_SUMM_OTHER #language en-US " %08x : %,14ld Pages (%,ld Bytes)\r\n" | |
| #string STR_MEMMAP_LIST_SUMM2 #language en-US " -------------- \r\n" | |
| "Total Memory: %,14ld MB (%,ld Bytes)\r\n" | |
| #string STR_MEMMAP_LIST_ITEM_SFO #language en-US "MemoryMap,"%s","%LX","%LX","%LX","%LX"\r\n" | |
| #string STR_MEMMAP_LIST_SUMM_SFO #language en-US "MemoryMapSummary,"%Ld","%Ld","%Ld","%Ld","%Ld","%Ld","%Ld","%Ld","%Ld","%Ld","%Ld","%Ld","%Ld","%Ld","%Ld","%Ld", "%Ld"\r\n" | |
| #string STR_EFI_COMPRESS_FAIL #language en-US "Unable to compress: %r.\r\n" | |
| #string STR_EFI_DECOMPRESS_FAIL #language en-US "Unable to decompress: %r.\r\n" | |
| #string STR_EFI_DECOMPRESS_NOPE #language en-US "The file does not appear to be a compressed file. Cannot continue. \"%H%s%N\"\r\n" | |
| #string STR_DMEM_HEADER_ROW #language en-US "Memory Address %016LX %X Bytes\r\n" | |
| #string STR_DMEM_MMIO_HEADER_ROW #language en-US "Memory Mapped IO Address %016LX %X Bytes\r\n" | |
| #string STR_DMEM_SYSTEM_TABLE #language en-US "\r\nValid EFI Header at Address %016Lx\r\n" | |
| "---------------------------------------------\r\n" | |
| "System: Table Structure size %08x revision %08x\r\n" | |
| "ConIn (%016LX) ConOut (%016LX) StdErr (%016LX)\r\n" | |
| "Runtime Services %016LX\r\n" | |
| "Boot Services %016LX\r\n" | |
| "SAL System Table %016LX\r\n" | |
| "ACPI Table %016LX\r\n" | |
| "ACPI 2.0 Table %016LX\r\n" | |
| "MPS Table %016LX\r\n" | |
| "SMBIOS Table %016LX\r\n" | |
| "DTB Table %016LX\r\n" | |
| "Memory Attribute Table %016LX\r\n" | |
| "RT Properties Table %016LX\r\n" | |
| "System Resource Table %016LX\r\n" | |
| "Debug Image Info Table %016LX\r\n" | |
| "Image Execution Info Table %016LX\r\n" | |
| "Json Config Data Table %016LX\r\n" | |
| "Json Capsule Data Table %016LX\r\n" | |
| "Json Capsule Results Table %016LX\r\n" | |
| "Memory Range Capsule %016LX\r\n" | |
| "Hii Database Export Buffer %016LX\r\n" | |
| "Conformance Profile Table %016LX\r\n" | |
| #string STR_LOAD_PCI_ROM_RES #language en-US "Image '%B%s%N' load result: %r\r\n" | |
| #string STR_LOADPCIROM_CORRUPT #language en-US "%H%s%N: File '%B%s%N' Image %d is corrupt.\r\n" | |
| #string STR_LOADPCIROM_LOAD_FAIL #language en-US "%H%s%N: File '%B%s%N' Image %d unable to load.\r\n" | |
| #string STR_LOADPCIROM_START_FAIL #language en-US "%H%s%N: File '%B%s%N' Image %d unable to start.\r\n" | |
| #string STR_MM_NOT_ALIGNED #language en-US "%H%s%N: Address parameter %016LX is not aligned.\r\n" | |
| #string STR_MM_PCIE_ADDRESS_RANGE #language en-US "%H%s%N: Address parameter %016LX is not a valid PCI/PCIE address.\r\n" | |
| #string STR_MM_MMIO #language en-US "%HMMIO%N" | |
| #string STR_MM_IO #language en-US "%HIO%N" | |
| #string STR_MM_PCI #language en-US "%HPCI%N" | |
| #string STR_MM_MEM #language en-US "%HMEM%N" | |
| #string STR_MM_PCIE #language en-US "%HPCIE%N" | |
| #string STR_MM_ADDRESS #language en-US " 0x%016lx : " | |
| #string STR_MM_BUF #language en-US "0x%0*lx" | |
| #string STR_MM_ERROR #language en-US "%H%s%N: Input had incorrect format\r\n" | |
| #string STR_SETVAR_PRINT #language en-US "%g - %s - %04x Bytes\r\n" | |
| #string STR_SETVAR_ERROR_SET #language en-US "%H%s%N: Unable to set - %H%g%N - %H%s%N\r\n" | |
| #string STR_SETVAR_ERROR_GET #language en-US "%H%s%N: Unable to get - %H%g%N - %H%s%N\r\n" | |
| #string STR_SETVAR_ERROR_DPFT #language en-US "%H%s%N: DevicePathFromText conversion was not successful.\r\n" | |
| #string STR_SERMODE_NO_FOUND #language en-US "%H%s%N: No serial ports found.\r\n" | |
| #string STR_SERMODE_NOT_FOUND #language en-US "%H%s%N: No serial port or specified serial port found.\r\n" | |
| #string STR_SERMODE_BAD_HANDLE #language en-US "%H%s%N: Handle %H%02x%N is not a serial device handle.\r\n" | |
| #string STR_SERMODE_SET_HANDLE #language en-US "Mode set on handle %H%02x%N successfully.\r\n" | |
| #string STR_SERMODE_SET_FAIL #language en-US "%H%s%N: Mode change on handle %H%02x%N was not successful.\r\n" | |
| #string STR_SERMODE_DISPLAY #language en-US "%x(%08x) - (%ld, %c, %d, %s)\r\n" | |
| #string STR_SERMODE_SET_UNSUPPORTED #language en-US "%H%s%N: One or more of the new settings is not supported on handle %H%02x%N.\r\n" | |
| #string STR_SERMODE_SET_DEV_ERROR #language en-US "%H%s%N: The serial device on handle %H%02x%N is not functioning correctly.\r\n" | |
| #string STR_PCI_HANDLE_CFG_ERR #language en-US "%H%s%N: Handle protocol or configuration error.\r\n" | |
| #string STR_PCI_BUS_RANGE_ERR #language en-US "%H%s%N: Get next bus range error.\r\n" | |
| #string STR_PCI_NO_FIND #language en-US "%H%s%N: Cannot find protocol interface for segment %x, bus %x.\r\n" | |
| #string STR_PCI_NO_CFG #language en-US "%H%s%N: Cannot read configuration data.\r\n" | |
| #string STR_PCI_INFO #language en-US "%H PCI Segment %02x Bus %02x Device %02x Func %02x%N [EFI %02x%02x%02x%02x00]\r\n" | |
| #string STR_PCI_TITLE #language en-US " Seg Bus Dev Func\r\n" | |
| " --- --- --- ----\r\n" | |
| #string STR_PCI_LINE_P1 #language en-US " %E%02x %02x %02x %02x ==> %N" | |
| #string STR_PCI_LINE_P2 #language en-US "\r\n Vendor %04x Device %04x Prog Interface %x\r\n" | |
| #string STR_PCIEX_CAPABILITY_CAPID #language en-US "CapID(%2x): %E%02x%N" | |
| #string STR_PCIEX_NEXTCAP_PTR #language en-US " NextCap Ptr(%2x): %E%02x%N\r\n" | |
| #string STR_PCIEX_CAP_REGISTER #language en-US "Cap Register(%2x): %E%04x%N\r\n" | |
| #string STR_PCIEX_DEVICE_CAP #language en-US "Device Capabilities(%2x): %E%08x%N\r\n" | |
| #string STR_PCIEX_DEVICE_CONTROL #language en-US "Device Control(%2x): %E%04x%N\r\n" | |
| #string STR_PCIEX_DEVICE_STATUS #language en-US "Device Status(%2x): %E%04x%N\r\n" | |
| #string STR_PCIEX_LINK_CAPABILITIES #language en-US "Link Capabilities(%2x): %E%08x%N\r\n" | |
| #string STR_PCIEX_LINK_CONTROL #language en-US "Link Control(%2x): %E%04x%N\r\n" | |
| #string STR_PCIEX_LINK_STATUS #language en-US "Link Status(%2x): %E%04x%N\r\n" | |
| #string STR_PCIEX_SLOT_CAPABILITIES #language en-US "Slot Capabilities(%2x): %E%08x%N\r\n" | |
| #string STR_PCIEX_SLOT_CONTROL #language en-US "Slot Control(%2x): %E%04x%N\r\n" | |
| #string STR_PCIEX_SLOT_STATUS #language en-US "Slot Status(%2x): %E%04x%N\r\n" | |
| #string STR_PCIEX_ROOT_CONTROL #language en-US "Root Control(%2x): %E%04x%N\r\n" | |
| #string STR_PCIEX_RSVDP #language en-US "Root Capabilities(%2x): %E%04x%N\r\n" | |
| #string STR_PCIEX_ROOT_STATUS #language en-US "Root Status(%2x): %E%08x%N\r\n" | |
| #string STR_PCI_LINE_VID_DID #language en-US "Vendor ID(%x): %E%04x%N Device ID(%x): %E%04x%N\r\n" | |
| #string STR_PCI_LINE_RID #language en-US "Revision ID(%x): %E%02x%N " | |
| #string STR_PCI_LINE_BIST #language en-US "BIST(%02x): " | |
| #string STR_PCI_LINE_CAP #language en-US "Capable,Return: %E%02x%N\r\n" | |
| #string STR_PCI_LINE_CAP_NO #language en-US " Incapable\r\n" | |
| #string STR_PCI2_CACHE_LINE_SIZE #language en-US "Cache Line Size(%x): %E%02x%N " | |
| #string STR_PCI2_LATENCY_TIMER #language en-US "Latency Timer(%x): %E%02x%N\r\n" | |
| #string STR_PCI2_HEADER_TYPE #language en-US "Header Type(%02x): %E%02x%N, " | |
| #string STR_PCI2_MULTI_FUNCTION #language en-US "Multi-function, " | |
| #string STR_PCI2_SINGLE_FUNCTION #language en-US "Single function, " | |
| #string STR_PCI2_PCI_DEVICE #language en-US "PCI device\r\n" | |
| #string STR_PCI2_P2P_BRIDGE #language en-US "P2P bridge\r\n" | |
| #string STR_PCI2_CARDBUS_BRIDGE #language en-US "CardBus bridge\r\n" | |
| #string STR_PCI2_RESERVED #language en-US "Reserved\r\n" | |
| #string STR_PCI2_CLASS #language en-US "Class: " | |
| #string STR_PCI2_BASE_ADDR #language en-US "Base Address Registers(%x):\r\n" | |
| #string STR_PCI2_START_TYPE #language en-US " Start_Address Type Space Prefetchable? Size Limit\r\n" | |
| #string STR_PCI2_NONE #language en-US " (None)" | |
| #string STR_PCI2_EXPANSION_ROM_DISABLED #language en-US "\r\nExpansion ROM Disabled(%x)\r\n\r\n" | |
| #string STR_PCI2_EXPANSION_ROM_BASE #language en-US "\r\nExpansion ROM Base Address(%x): %E%08x%N\r\n\r\n" | |
| #string STR_PCI2_CARDBUS_CIS #language en-US "Cardbus CIS ptr(%x): %E%08x%N\r\n" | |
| #string STR_PCI2_SUB_VENDOR_ID #language en-US "Sub VendorID(%x): %E%04x%N " | |
| #string STR_PCI2_SUBSYSTEM_ID #language en-US "Subsystem ID(%x): %E%04x%N\r\n" | |
| #string STR_PCI2_CAPABILITIES_PTR #language en-US "Capabilities Ptr(%x): %E%02x%N\r\n" | |
| #string STR_PCI2_INTERRUPT_LINE #language en-US "Interrupt Line(%x): %E%02x%N " | |
| #string STR_PCI2_INTERRUPT_PIN #language en-US "Interrupt Pin(%x): %E%02x%N\r\n" | |
| #string STR_PCI2_MIN_GNT #language en-US "Min_Gnt(%x): %E%02x%N " | |
| #string STR_PCI2_MAX_LAT #language en-US "Max_Lat(%x): %E%02x%N\r\n" | |
| #string STR_PCI2_BASE_ADDRESS #language en-US "Base Address Registers(%x):" | |
| #string STR_PCI2_START_TYPE_2 #language en-US " Start_Address Type Space Prefetchable? Size Limit\r\n" | |
| #string STR_PCI2_NO_EXPANSION_ROM #language en-US "\r\nNo Expansion ROM(%x) " | |
| #string STR_PCI2_EXPANSION_ROM_BASE_2 #language en-US "\r\nExpansion ROM Base Address(%x): %E%08x%N\r\n" | |
| #string STR_PCI2_BUS_NUMBERS #language en-US "\r\n\r\n(Bus Numbers) Primary(%x) Secondary(%x) Subordinate(%x)\r\n" | |
| #string STR_PCI2_BRIDGE #language en-US " %E%02x%N" | |
| #string STR_PCI2_SECONDARY_TIMER #language en-US "\r\nSecondary Latency Timer(%x): %E%02x%N\n\n" | |
| #string STR_PCI2_CARDBUS_LATENCY #language en-US "\r\nCardBus Latency Timer(%x): %E%02x%N\r\n" | |
| #string STR_PCI2_RESOURCE_TYPE_2 #language en-US "\r\nResource Type Type Base Limit\r\n" | |
| #string STR_PCI2_MEM_3 #language en-US "Mem(%x) %s %E%08x%N %E%08x%N\r\n" | |
| #string STR_PCI2_IO_2 #language en-US "I/O(%x) %s %E%08x%N %E%08x%N\r\n" | |
| #string STR_PCI2_INTERRUPT_LINE_3 #language en-US "\r\nInterrupt Line(%x): %E%02x%N Interrupt Pin(%x): %E%02x%N\r\n" | |
| #string STR_PCI2_SUB_VENDOR_ID_2 #language en-US "\r\nSub VendorID(%x): %E%04x%N Subsystem ID(%x): %E%04x%N\r\n" | |
| #string STR_PCI2_OPTIONAL #language en-US "Optional 16-Bit PC Card legacy Mode Base Address(%x): %E%08x%N\r\n" | |
| #string STR_PCI2_STATUS #language en-US "Status(%x): %E%04x%N\r\n" | |
| #string STR_PCI2_SECONDARY_STATUS #language en-US "Secondary Status(%2x): %E%4x%N\r\n" | |
| #string STR_PCI2_NEW_CAPABILITIES #language en-US " (04)New Capabilities linked list: %E%d%N" | |
| #string STR_PCI2_66_CAPABLE #language en-US " (05)66MHz Capable: %EN/A%N\r\n" | |
| #string STR_PCI2_66_CAPABLE_2 #language en-US " (05)66MHz Capable: %E%d%N\r\n" | |
| #string STR_PCI2_FAST_BACK #language en-US " (07)Fast Back-to-Back Capable: %E%d%N" | |
| #string STR_PCI2_NO #language en-US "No " | |
| #string STR_PCI2_YES #language en-US "YES " | |
| #string STR_PCI2_ONE_VAR_4 #language en-US "\r\n %E%04x%N " | |
| #string STR_PCI2_NEWBAR_32 #language en-US " %08x " | |
| #string STR_PCI2_NEWBAR_32_2 #language en-US " %08x" | |
| #string STR_PCI2_RSHIFT #language en-US "%08x" | |
| #string STR_PCI2_NEWBAR_32_3 #language en-US "%04x " | |
| #string STR_PCI2_NEWBAR_32_4 #language en-US "%04x" | |
| #string STR_PCI2_CARDBUS_SOCKET #language en-US "\r\nCardBus Socket Registers/ExCA Base Address Register(%x): %E%8x%N\r\n\r\n" | |
| #string STR_PCI2_BUS_NUMBERS_2 #language en-US "\r\n(Bus Numbers) Pci(%x) CardBus(%x) Subordinate(%x)\r\n" | |
| #string STR_PCI2_CARDBUS #language en-US " %E%02x%N" | |
| #string STR_PCI2_CARDBUS_2 #language en-US " %E%02x%N" | |
| #string STR_PCI2_CARDBUS_3 #language en-US " %E%02x%N\r\n" | |
| #string STR_PCI2_MASTER_DATA #language en-US " (08)Master Data Parity Error: %E%d%N\r\n" | |
| #string STR_PCI2_DEVSEL_TIMING #language en-US " (09)DEVSEL timing: " | |
| #string STR_PCI2_FAST #language en-US "%E Fast%N" | |
| #string STR_PCI2_MEDIUM #language en-US "%E Medium%N" | |
| #string STR_PCI2_SLOW #language en-US "%E Slow%N" | |
| #string STR_PCI2_RESERVED_2 #language en-US "%EReserved%N" | |
| #string STR_PCI2_SIGNALED_TARGET #language en-US " (11)Signaled Target Abort: %E%d%N\r\n" | |
| #string STR_PCI2_RECEIVED_TARGET #language en-US " (12)Received Target Abort: %E%d%N" | |
| #string STR_PCI2_RECEIVED_MASTER #language en-US " (13)Received Master Abort: %E%d%N\r\n" | |
| #string STR_PCI2_SIGNALED_ERROR #language en-US " (14)Signaled System Error: %E%d%N" | |
| #string STR_PCI2_RECEIVED_ERROR #language en-US " (14)Received System Error: %E%d%N" | |
| #string STR_PCI2_DETECTED_ERROR #language en-US " (15)Detected Parity Error: %E%d%N\r\n" | |
| #string STR_PCI2_COMMAND #language en-US "Command(%x): %E%04x%N\r\n" | |
| #string STR_PCI2_SPACE_ACCESS_DENIED #language en-US " (00)I/O space access enabled: %E%d%N" | |
| #string STR_PCI2_MEMORY_SPACE #language en-US " (01)Memory space access enabled: %E%d%N\r\n" | |
| #string STR_PCI2_BEHAVE_BUS_MASTER #language en-US " (02)Behave as bus master: %E%d%N" | |
| #string STR_PCI2_MONITOR_SPECIAL_CYCLE #language en-US " (03)Monitor special cycle enabled: %E%d%N\r\n" | |
| #string STR_PCI2_MEM_WRITE_INVALIDATE #language en-US " (04)Mem Write & Invalidate enabled: %E%d%N" | |
| #string STR_PCI2_PALETTE_SNOOPING #language en-US " (05)Palette snooping is enabled: %E%d%N\r\n" | |
| #string STR_PCI2_ASSERT_PERR #language en-US " (06)Assert PERR# when parity error: %E%d%N" | |
| #string STR_PCI2_DO_ADDR_STEPPING #language en-US " (07)Do address/data stepping: %E%d%N\r\n" | |
| #string STR_PCI2_SERR_DRIVER #language en-US " (08)SERR# driver enabled: %E%d%N" | |
| #string STR_PCI2_FAST_BACK_2 #language en-US " (09)Fast back-to-back transact...: %E%d%N\r\n\r\n" | |
| #string STR_PCI2_BRIDGE_CONTROL #language en-US "Bridge Control(%x) %E%04x%N\r\n" | |
| #string STR_PCI2_PARITY_ERROR #language en-US " (00)Parity Error Response: %E%d%N" | |
| #string STR_PCI2_SERR_ENABLE #language en-US " (01)SERR# Enable: %E%d%N\r\n" | |
| #string STR_PCI2_ISA_ENABLE #language en-US " (02)ISA Enable: %E%d%N" | |
| #string STR_PCI2_RESOURCE_TYPE #language en-US "\r\nResource Type Base Limit\r\n" | |
| #string STR_PCI2_TWO_VARS #language en-US "I/O(%x) %E%08x%N" | |
| #string STR_PCI2_ONE_VAR #language en-US " %E%08x%N\r\n" | |
| #string STR_PCI2_MEMORY #language en-US "Memory(%x) %E%08x%N" | |
| #string STR_PCI2_PREFETCHABLE #language en-US "Prefetchable Memory(%x) %E%08x%08x%N" | |
| #string STR_PCI2_TWO_VARS_2 #language en-US " %E%08x%08x%N\r\n" | |
| #string STR_PCI2_CAPABILITIES_PTR_2 #language en-US "\r\nCapabilities Ptr(%x): %E%02x%N \r\n\r\n" | |
| #string STR_PCI2_INTERRUPT_LINE_2 #language en-US "\r\nInterrupt Line(%x) %E%02x%N " | |
| #string STR_PCI2_BAR #language en-US "\r\n %E%08x%N " | |
| #string STR_PCI2_MEM #language en-US "Mem " | |
| #string STR_PCI2_32_BITS #language en-US "32 bits " | |
| #string STR_PCI2_ONE_VAR_2 #language en-US "\r\n %E%08x" | |
| #string STR_PCI2_ONE_VAR_3 #language en-US "%08x%N " | |
| #string STR_PCI2_64_BITS #language en-US "64 bits " | |
| #string STR_PCI2_MEM_2 #language en-US "Mem " | |
| #string STR_PCI2_VGA_ENABLE #language en-US " (03)VGA Enable: %E%d%N\r\n" | |
| #string STR_PCI2_MASTER_ABORT #language en-US " (05)Master Abort Mode: %E%d%N" | |
| #string STR_PCI2_SECONDARY_BUS_RESET #language en-US " (06)Secondary Bus Reset: %E%d%N\r\n" | |
| #string STR_PCI2_FAST_ENABLE #language en-US " (07)Fast Back-to-Back Enable: %E%d%N" | |
| #string STR_PCI2_PRIMARY_DISCARD_TIMER #language en-US " (08)Primary Discard Timer: %E%s%N\r\n" | |
| #string STR_PCI2_SECONDARY_DISCARD_TIMER #language en-US " (09)Secondary Discard Timer: %E%s%N" | |
| #string STR_PCI2_DISCARD_TIMER_STATUS #language en-US " (10)Discard Timer Status: %E%d%N\r\n" | |
| #string STR_PCI2_DISCARD_TIMER_SERR #language en-US " (11)Discard Timer SERR# Enable: %E%d%N\r\n" | |
| #string STR_PCI2_CARDBUS_RESET #language en-US " (06)CardBus Reset: %E%d%N\r\n" | |
| #string STR_PCI2_IREQ_ENABLE #language en-US " (07)IREQ/INT Enable: %E%d%N" | |
| #string STR_PCI2_WRITE_POSTING_ENABLE #language en-US " (10)Write Posting Enable: %E%d%N\r\n" | |
| #string STR_PCI_EXT_CAP_AER #language en-US " Advanced Error Reporting\r\n" | |
| " UncorrectableErrorStatus %08x\r\n" | |
| " UncorrectableErrorMask %08x\r\n" | |
| " UncorrectableErrorSeverity %08x\r\n" | |
| " CorrectableErrorStatus %08x\r\n" | |
| " CorrectableErrorMask %08x\r\n" | |
| " AdvancedErrorCapAndControl %08x\r\n" | |
| " HeaderLog1 %08x\r\n" | |
| " HeaderLog2 %08x\r\n" | |
| " HeaderLog3 %08x\r\n" | |
| " HeaderLog4 %08x\r\n" | |
| " RootErrorCommand %08x\r\n" | |
| " RootErrorStatus %08x\r\n" | |
| " ErrorSourceIdentification %04x\r\n" | |
| " CorrectableErrorSourceIden %04x\r\n" | |
| " TlpPrefixLog1 %08x\r\n" | |
| " TlpPrefixLog2 %08x\r\n" | |
| " TlpPrefixLog3 %08x\r\n" | |
| " TlpPrefixLog4 %08x\r\n" | |
| #string STR_PCI_EXT_CAP_LINK_CONTROL #language en-US " Link Control\r\n" | |
| " RootComplexLinkCapabilities %08x\r\n" | |
| " RootComplexLinkControl %04x\r\n" | |
| " RootComplexLinkStatus %04x\r\n" | |
| #string STR_PCI_EXT_CAP_LINK_DECLAR #language en-US " Link Declaration\r\n" | |
| " ElementSelfDescription %08x\r\n" | |
| #string STR_PCI_EXT_CAP_LINK_DECLAR2 #language en-US " LinkEntry[%x] %08x\r\n" | |
| #string STR_PCI_EXT_CAP_SN #language en-US " Serial Number\r\n" | |
| " SerialNumber %L16x\r\n" | |
| #string STR_PCI_EXT_CAP_POWER #language en-US " Power Budgeting\r\n" | |
| " DataSelect %02x\r\n" | |
| " Data %08x\r\n" | |
| " PowerBudgetCapability %02x\r\n" | |
| #string STR_PCI_EXT_CAP_ACS #language en-US " ACS\r\n" | |
| " CapabilityRegister %04x\r\n" | |
| " ControlRegister %04x\r\n" | |
| #string STR_PCI_EXT_CAP_ACS2 #language en-US " EgressControlVectorByte[%x] %02x\r\n" | |
| #string STR_PCI_EXT_CAP_LAT #language en-US " Latency Tolerance Reporting\r\n" | |
| " MaxSnoopLatency %04x\r\n" | |
| " MaxNoSnoopLatency %04x\r\n" | |
| #string STR_PCI_EXT_CAP_ARI #language en-US " ARI\r\n" | |
| " AriCapability %04x\r\n" | |
| " AriControl %04x\r\n" | |
| #string STR_PCI_EXT_CAP_RCRB #language en-US " RCRB\r\n" | |
| " VendorId %04x\r\n" | |
| " DeviceId %04x\r\n" | |
| " RcrbCapabilities %04x\r\n" | |
| " RcrbControl %04x\r\n" | |
| #string STR_PCI_EXT_CAP_VEN #language en-US " VendorSpecific\r\n" | |
| " VendorSpecificHeader %04x\r\n" | |
| #string STR_PCI_EXT_CAP_DPA #language en-US " DPA\r\n" | |
| " DpaCapability %04x\r\n" | |
| " DpaLatencyIndicator %04x\r\n" | |
| " DpaStatus %04x\r\n" | |
| " DpaControl %04x\r\n" | |
| #string STR_PCI_EXT_CAP_DPA2 #language en-US " DpaPowerAllocationArray[%x] %02x\r\n" | |
| #string STR_PCI_EXT_CAP_ECEA #language en-US " Event Collector Endpoint Association\r\n" | |
| " AssociationBitmap %04x\r\n" | |
| #string STR_PCI_EXT_CAP_VC_BASE #language en-US " Virtual (Multi) Channel Capability\r\n" | |
| " ExtendedVcCount %08x\r\n" | |
| " PortCapability1 %08x\r\n" | |
| " PortCapability2 %08x\r\n" | |
| " ArbitrationTableOffset %08x\r\n" | |
| " PortVcControl %04x\r\n" | |
| " PortVcStatus %04x\r\n" | |
| #string STR_PCI_EXT_CAP_VC_ITEM #language en-US " Virtual Channel Capability Extended Item[%x]\r\n" | |
| " ResourceCapability %08x\r\n" | |
| " ArbitrationTableOffset %08x\r\n" | |
| " ResourceControl %08x\r\n" | |
| " ResourceStatus %04x\r\n" | |
| #string STR_PCI_EXT_CAP_MULTICAST #language en-US " MultiCast Capability\r\n" | |
| " MultiCastCapability %04x\r\n" | |
| " MulticastControl %04x\r\n" | |
| " McBaseAddress %L16x\r\n" | |
| " McReceiveAddress %L16x\r\n" | |
| " McBlockAll %L16x\r\n" | |
| " McBlockUntranslated %L16x\r\n" | |
| " McOverlayBar %L16x\r\n" | |
| #string STR_PCI_EXT_CAP_RESIZE_BAR #language en-US " Resizeable Bar Capability [%x]\r\n" | |
| " ResizableBarCapability %08x\r\n" | |
| " ResizableBarControl %04x\r\n" | |
| #string STR_PCI_EXT_CAP_TPH #language en-US " TPH\r\n" | |
| " TphRequesterCapability %08x\r\n" | |
| " TphRequesterControl %04x\r\n" | |
| " TphTable (optional):\r\n" | |
| #string STR_PCI_EXT_CAP_SECONDARY #language en-US " Secondary PCI Express Extended Capability\r\n" | |
| " LinkControl3 %08x\r\n" | |
| " LaneErrorStatus %08x\r\n" | |
| " EqualizationControl:\r\n" | |
| #string STR_DMPSTORE_SAVE #language en-US "Save variable to file: %H%s%N.\r\n" | |
| #string STR_DMPSTORE_LOAD #language en-US "Load and set variables from file: %H%s%N.\r\n" | |
| #string STR_DMPSTORE_LOAD_GEN_FAIL #language en-US "%H%s%N: Failed to set variable %H%s%N: %r.\r\n" | |
| #string STR_DMPSTORE_LOAD_BAD_FILE #language en-US "%H%s%N: Incorrect file format.\r\n" | |
| #string STR_DMPSTORE_HEADER_LINE #language en-US "Variable %H%s%N '%H%g%N:%H%s%N' DataSize = 0x%02x\r\n" | |
| #string STR_DMPSTORE_HEADER_LINE2 #language en-US "Variable %H%s%N '%H%s%N:%H%s%N' DataSize = 0x%02x\r\n" | |
| #string STR_DMPSTORE_DELETE_LINE #language en-US "Delete variable '%H%g%N:%H%s%N': %r\r\n" | |
| #string STR_DMPSTORE_NO_VAR_FOUND #language en-US "%H%s%N: No matching variables found.\r\n" | |
| #string STR_DMPSTORE_NO_VAR_FOUND_SFO #language en-US "VariableInfo,\"\",\"\",\"\",\"\",\"\"\r\n" | |
| #string STR_DMPSTORE_NO_VAR_FOUND_GN #language en-US "%H%s%N: No matching variables found. Guid %g, Name %s\r\n" | |
| #string STR_DMPSTORE_NO_VAR_FOUND_NG_SFO #language en-US "VariableInfo,\"%s\",\"%g\",\"\",\"\",\"\"\r\n" | |
| #string STR_DMPSTORE_NO_VAR_FOUND_N #language en-US "%H%s%N: No matching variables found. Name %s\r\n" | |
| #string STR_DMPSTORE_NO_VAR_FOUND_N_SFO #language en-US #language en-US "VariableInfo,\"%s\",\"\",\"\",\"\",\"\"\r\n" | |
| #string STR_DMPSTORE_NO_VAR_FOUND_G #language en-US "%H%s%N: No matching variables found. Guid %g\r\n" | |
| #string STR_DMPSTORE_NO_VAR_FOUND_G_SFO #language en-US "VariableInfo,\"\",\"%g\",\"\",\"\",\"\"\r\n" | |
| #string STR_DMPSTORE_VAR_SFO #language en-US "VariableInfo,\"%s\",\"%g\",\"0x%x\",\"0x%x\",\"%s\"\r\n" | |
| #string STR_GET_HELP_COMP #language en-US "" | |
| ".TH comp 0 "Compare 2 files"\r\n" | |
| ".SH NAME\r\n" | |
| "Compares the contents of two files on a byte-for-byte basis.\r\n" | |
| ".SH SYNOPSIS\r\n" | |
| " \r\n" | |
| "COMP [-b] file1 file2\r\n" | |
| ".SH OPTIONS\r\n" | |
| " \r\n" | |
| " -b - Displays one screen at a time.\r\n" | |
| " file1 - Specifies a first file name (directory name or wildcards not permitted).\r\n" | |
| " file2 - Specifies a second file name (directory name or wildcards not permitted).\r\n" | |
| ".SH DESCRIPTION\r\n" | |
| " \r\n" | |
| "NOTES:\r\n" | |
| " 1. This command compares the contents of two files in binary mode.\r\n" | |
| " 2. It displays up to 10 differences between the two files. For each\r\n" | |
| " difference, up to 32 bytes from the location where the difference starts\r\n" | |
| " is dumped.\r\n" | |
| " 3. It will exit immediately if the lengths of the compared files are\r\n" | |
| " different.\r\n" | |
| ".SH EXAMPLES\r\n" | |
| " \r\n" | |
| "EXAMPLES:\r\n" | |
| " * To compare two files with the same length but different contents:\r\n" | |
| " fs0:\> comp bios.inf bios2.inf\r\n" | |
| ".SH RETURNVALUES\r\n" | |
| " \r\n" | |
| "RETURN VALUES:\r\n" | |
| " SHELL_SUCCESS The function operated as expected.\r\n" | |
| " SHELL_NOT_EQUAL The files were not identical.\r\n" | |
| " SHELL_INVALID_PARAMETER One of the passed in parameters was incorrectly\r\n" | |
| " formatted or its value was out of bounds.\r\n" | |
| " SHELL_SECURITY_VIOLATION This function was not performed due to a security\r\n" | |
| " violation.\r\n" | |
| " SHELL_NOT_FOUND The requested file was not found.\r\n" | |
| #string STR_GET_HELP_SETSIZE #language en-US "" | |
| ".TH setsize 0 "Set file size"\r\n" | |
| ".SH NAME\r\n" | |
| "Adjusts the size of a file.\r\n" | |
| ".SH SYNOPSIS\r\n" | |
| " \r\n" | |
| "SETSIZE size file [file...]\r\n" | |
| ".SH OPTIONS\r\n" | |
| " \r\n" | |
| " size - Specifies the size of the file after it is adjusted.\r\n" | |
| " file - Specifies the file or files to be adjusted.\r\n" | |
| ".SH DESCRIPTION\r\n" | |
| " \r\n" | |
| "NOTES:\r\n" | |
| " 1. Setting the size smaller than the actual data contained in this file will\r\n" | |
| " truncate its data.\r\n" | |
| " 2. This command adjusts the size of a particular target file.\r\n" | |
| " 3. This command automatically truncates or extends the size of a file based on the passed-in\r\n" | |
| " parameters. If the file does not exist, it is created.\r\n" | |
| ".SH RETURNVALUES\r\n" | |
| " \r\n" | |
| "RETURN VALUES:\r\n" | |
| " SHELL_SUCCESS The action was completed as requested.\r\n" | |
| " SHELL_VOLUME_FULL The media has insufficient space to complete the\r\n" | |
| " request.\r\n" | |
| " SHELL_INVALID_PARAMETER One of the passed in parameters was incorrectly\r\n" | |
| " formatted or its value was out of bounds.\r\n" | |
| #string STR_GET_HELP_MODE #language en-US "" | |
| ".TH mode 0 "Shows or changes ConOut mode."\r\n" | |
| ".SH NAME\r\n" | |
| "Displays or changes the console output device mode.\r\n" | |
| ".SH SYNOPSIS\r\n" | |
| " \r\n" | |
| "MODE [col row]\r\n" | |
| ".SH OPTIONS\r\n" | |
| " \r\n" | |
| " col - Specifies the number of columns.\r\n" | |
| " row - Specifies the number of rows.\r\n" | |
| ".SH DESCRIPTION\r\n" | |
| " \r\n" | |
| "NOTES:\r\n" | |
| " 1. This command changes the display mode for the console output\r\n" | |
| " device.\r\n" | |
| " 2. When this command is used without any parameters, it shows the list of\r\n" | |
| " modes that the standard output device currently supports.\r\n" | |
| " 3. When used with the row and col parameter, this command\r\n" | |
| " changes the number of rows and columns on the standard output device.\r\n" | |
| " 4. The current selected mode is indicated by a '*'. \r\n" | |
| " 5. The display is cleared every time this command is used to change the\r\n" | |
| " currently selected display mode.\r\n" | |
| ".SH EXAMPLES\r\n" | |
| " \r\n" | |
| "EXAMPLES:\r\n" | |
| " * To display all available modes on standard output:\r\n" | |
| " Shell> mode\r\n" | |
| " \r\n" | |
| " * To change the current mode setting:\r\n" | |
| " Shell> mode 80 50\r\n" | |
| ".SH RETURNVALUES\r\n" | |
| " \r\n" | |
| "RETURN VALUES:\r\n" | |
| " SHELL_SUCCESS The action was completed as requested.\r\n" | |
| " SHELL_SECURITY_VIOLATION This function was not performed due to a security\r\n" | |
| " violation.\r\n" | |
| " SHELL_INVALID_PARAMETER One of the passed-in parameters was incorrectly\r\n" | |
| " formatted or its value was out of bounds.\r\n" | |
| #string STR_GET_HELP_MEMMAP #language en-US "" | |
| ".TH memmap 0 "Displays the memory map."\r\n" | |
| ".SH NAME\r\n" | |
| "Displays the memory map maintained by the UEFI environment.\r\n" | |
| ".SH SYNOPSIS\r\n" | |
| " \r\n" | |
| "MEMMAP [-b] [-sfo]\r\n" | |
| ".SH OPTIONS\r\n" | |
| " \r\n" | |
| " -b - Displays one screen at a time\r\n" | |
| " -sfo - Displays information as described in Standard-Format Output.\r\n" | |
| ".SH DESCRIPTION\r\n" | |
| " \r\n" | |
| "NOTES:\r\n" | |
| " 1. The UEFI environment keeps track of all the physical memory in the system\r\n" | |
| " and how it is currently being used.\r\n" | |
| " 2. Total Memory is the physical memory size excluding Reserved, Unusable,\r\n" | |
| " MemoryMappedIO, and MemoryMappedIOPortSpace memory types.\r\n" | |
| " 3. Refer to the UEFI specification for memory type definitions.\r\n" | |
| ".SH EXAMPLES\r\n" | |
| " \r\n" | |
| "EXAMPLES:\r\n" | |
| " * To display the system memory map:\r\n" | |
| " Shell> memmap\r\n" | |
| " \r\n" | |
| #string STR_GET_HELP_EFICOMPRESS #language en-US "" | |
| ".TH eficompress 0 "compresses a file."\r\n" | |
| ".SH NAME\r\n" | |
| "Compresses a file using UEFI Compression Algorithm.\r\n" | |
| ".SH SYNOPSIS\r\n" | |
| " \r\n" | |
| "EFICOMPRESS infile outfile\r\n" | |
| ".SH OPTIONS\r\n" | |
| " \r\n" | |
| " infile - Specifies the file name of the uncompressed input file.\r\n" | |
| " outfile - Specifies the file name of the compressed output file.\r\n" | |
| ".SH DESCRIPTION\r\n" | |
| " \r\n" | |
| "NOTES:\r\n" | |
| " 1. This command compresses a file using UEFI Compression Algorithm\r\n" | |
| " and writes the compressed form out to a new file.\r\n" | |
| ".SH EXAMPLES\r\n" | |
| " \r\n" | |
| "EXAMPLES:\r\n" | |
| " * To compress a file named 'uncompressed' to a file named 'compressed':\r\n" | |
| " fs0:\> eficompress uncompressed compressed\r\n" | |
| #string STR_GET_HELP_EFIDCOMPRESS #language en-US "" | |
| ".TH efidecompress 0 "Decompresses a file."\r\n" | |
| ".SH NAME\r\n" | |
| "Decompresses a file using UEFI Decompression Algorithm.\r\n" | |
| ".SH SYNOPSIS\r\n" | |
| " \r\n" | |
| "EFIDECOMPRESS infile outfile\r\n" | |
| ".SH OPTIONS\r\n" | |
| " \r\n" | |
| " infile - Specifies the file name of the compressed input file.\r\n" | |
| " outfile - Specifies the file name of the decompressed output file.\r\n" | |
| ".SH DESCRIPTION\r\n" | |
| " \r\n" | |
| "NOTES:\r\n" | |
| " 1. This decompresses a file using UEFI Decompression\r\n" | |
| " Algorithm and writes the decompressed form out to a new file.\r\n" | |
| ".SH EXAMPLES\r\n" | |
| " \r\n" | |
| "EXAMPLES:\r\n" | |
| " * To decompress a file named 'compressed' to a file named 'uncompressed':\r\n" | |
| " fs0:\> efidecompress compressed uncompressed\r\n" | |
| #string STR_GET_HELP_DMEM #language en-US "" | |
| ".TH dmem 0 "Displays memory."\r\n" | |
| ".SH NAME\r\n" | |
| "Displays the contents of system or device memory.\r\n" | |
| ".SH SYNOPSIS\r\n" | |
| " \r\n" | |
| "DMEM [-b] [address] [size] [-MMIO]\r\n" | |
| ".SH OPTIONS\r\n" | |
| " \r\n" | |
| " -b - Displays one screen at a time.\r\n" | |
| " -MMIO - Forces address cycles to the PCI bus.\r\n" | |
| " address - Specifies a starting address in hexadecimal format.\r\n" | |
| " size - Specifies the number of bytes to display in hexadecimal format.\r\n" | |
| ".SH DESCRIPTION\r\n" | |
| " \r\n" | |
| "NOTES:\r\n" | |
| " 1. This command displays the contents of system memory or device memory.\r\n" | |
| " 2. Enter address and size in hexadecimal format.\r\n" | |
| " 3. If address is not specified, the contents of the UEFI System Table\r\n" | |
| " are displayed. Otherwise, memory starting at the specified address is displayed.\r\n" | |
| " 4. Size specifies the number of bytes to display. If size is not specified,\r\n" | |
| " 512 bytes are displayed.\r\n" | |
| " 5. If MMIO is not specified, main system memory is displayed. Otherwise,\r\n" | |
| " device memory is displayed through the use of the\r\n" | |
| " EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.\r\n" | |
| ".SH EXAMPLES\r\n" | |
| " \r\n" | |
| "EXAMPLES:\r\n" | |
| " * To display the UEFI system table pointer entries:\r\n" | |
| " fs0:\> dmem\r\n" | |
| " \r\n" | |
| " * To display memory contents from 1af3088 with size of 16 bytes:\r\n" | |
| " Shell> dmem 1af3088 16\r\n" | |
| " \r\n" | |
| " * To display memory mapped IO contents from 1af3088 with a size of 16 bytes:\r\n" | |
| " Shell> dmem 1af3088 16 -MMIO\r\n" | |
| #string STR_GET_HELP_MM #language en-US "" | |
| ".TH mm 0 "Displays or modifies address space memory."\r\n" | |
| ".SH NAME\r\n" | |
| "Displays or modifies MEM/MMIO/IO/PCI/PCIE address space.\r\n" | |
| ".SH SYNOPSIS\r\n" | |
| " \r\n" | |
| "MM Address [Value] [-w 1|2|4|8] [-MEM | -MMIO | -IO | -PCI | -PCIE] [-n]\r\n" | |
| ".SH OPTIONS\r\n" | |
| " \r\n" | |
| " Address - Starting address in hexadecimal format.\r\n" | |
| " Value - The value to write in hexadecimal format.\r\n" | |
| " -MEM - Memory Address type\r\n" | |
| " -MMIO - Memory Mapped IO Address type\r\n" | |
| " -IO - IO Address type\r\n" | |
| " -PCI - PCI Configuration Space Address type:\r\n" | |
| " Address format: ssssbbddffrr\r\n" | |
| " ssss - Segment\r\n" | |
| " bb - Bus\r\n" | |
| " dd - Device\r\n" | |
| " ff - Function\r\n" | |
| " rr - Register\r\n" | |
| " -PCIE - PCIE Configuration Space Address type:\r\n" | |
| " Address format: ssssbbddffrrr\r\n" | |
| " ssss - Segment\r\n" | |
| " bb - Bus\r\n" | |
| " dd - Device\r\n" | |
| " ff - Function\r\n" | |
| " rrr - Register\r\n" | |
| " -w - Unit size accessed in bytes:\r\n" | |
| " 1 - 1 byte\r\n" | |
| " 2 - 2 bytes\r\n" | |
| " 4 - 4 bytes\r\n" | |
| " 8 - 8 bytes\r\n" | |
| " -n - Non-interactive mode\r\n" | |
| ".SH DESCRIPTION\r\n" | |
| " \r\n" | |
| "NOTES:\r\n" | |
| " 1. If the address type parameter is not specified, address type defaults\r\n" | |
| " to the 'MEM' type.\r\n" | |
| " 2. If the 'Value' parameter is specified, the '-n' option is used and\r\n" | |
| " the command writes the value to the\r\n" | |
| " specified address in non-interactive mode. If the 'Value' parameter is\r\n" | |
| " not specified, only the current contents in the address are displayed.\r\n" | |
| " 3. If the '-w' option is not specified, unit size defaults to 1 byte.\r\n" | |
| " 4. If the PCI address type is specified, the 'Address' parameter must\r\n" | |
| " follow the PCI Configuration Space Address format above. The 'PCI'\r\n" | |
| " command can be used to determine the address for a specified device.\r\n" | |
| " It is listed in the PCI configuration space dump information in the\r\n" | |
| " following format: "[EFI ssbbddffxx]".\r\n" | |
| " 5. If the PCIE address type is specified, the 'Address' parameter must\r\n" | |
| " follow the PCIE Configuration Space Address format above.\r\n" | |
| " 6. In interactive mode, type a hex value to modify, 'q' or '.' to exit.\r\n" | |
| " If the '-n' option is specified, it runs in non-interactive mode,\r\n" | |
| " which supports batch file operation without user intervention.\r\n" | |
| " 7. Not all PCI configuration register locations are writable.\r\n" | |
| " 8. MM will only write the specified value. Read-modify-write operations\r\n" | |
| " are not supported.\r\n" | |
| " 9. The 'Address' parameter must be aligned on a boundary of the\r\n" | |
| " specified width.\r\n" | |
| " 10. Not all addresses are safe to access. Access to any improper address\r\n" | |
| " can bring unexpected results.\r\n" | |
| ".SH EXAMPLES\r\n" | |
| " \r\n" | |
| "EXAMPLES:\r\n" | |
| " * To display or modify memory:\r\n" | |
| " Address 0x1b07288, default width=1 byte:\r\n" | |
| " fs0:\> mm 1b07288\r\n" | |
| " MEM 0x0000000001B07288 : 0x6D >\r\n" | |
| " MEM 0x0000000001B07289 : 0x6D >\r\n" | |
| " MEM 0x0000000001B0728A : 0x61 > 80\r\n" | |
| " MEM 0x0000000001B0728B : 0x70 > q\r\n" | |
| " fs0:\> mm 1b07288\r\n" | |
| " MEM 0x0000000001B07288 : 0x6D >\r\n" | |
| " MEM 0x0000000001B07289 : 0x6D >\r\n" | |
| " MEM 0x0000000001B0728A : 0x80 > *Modified\r\n" | |
| " MEM 0x0000000001B0728B : 0x70 > q\r\n" | |
| " \r\n" | |
| " * To modify memory: Address 0x1b07288, width = 2 bytes:\r\n" | |
| " Shell> mm 1b07288 -w 2\r\n" | |
| " MEM 0x0000000001B07288 : 0x6D6D >\r\n" | |
| " MEM 0x0000000001B0728A : 0x7061 > 55aa\r\n" | |
| " MEM 0x0000000001B0728C : 0x358C > q\r\n" | |
| " Shell> mm 1b07288 -w 2\r\n" | |
| " MEM 0x0000000001B07288 : 0x6D6D >\r\n" | |
| " MEM 0x0000000001B0728A : 0x55AA > *Modified\r\n" | |
| " MEM 0x0000000001B0728C : 0x358C > q\r\n" | |
| " \r\n" | |
| " * To display IO space: Address 80h, width = 4 bytes:\r\n" | |
| " Shell> mm 80 -w 4 -IO\r\n" | |
| " IO 0x0000000000000080 : 0x000000FE >\r\n" | |
| " IO 0x0000000000000084 : 0x00FF5E6D > q\r\n" | |
| " \r\n" | |
| " * To modify IO space using non-interactive mode:\r\n" | |
| " Shell> mm 80 52 -w 1 -IO\r\n" | |
| " Shell> mm 80 -w 1 -IO\r\n" | |
| " IO 0x0000000000000080 : 0x52 > FE *Modified\r\n" | |
| " IO 0x0000000000000081 : 0xFF >\r\n" | |
| " IO 0x0000000000000082 : 0x00 >\r\n" | |
| " IO 0x0000000000000083 : 0x00 >\r\n" | |
| " IO 0x0000000000000084 : 0x6D >\r\n" | |
| " IO 0x0000000000000085 : 0x5E >\r\n" | |
| " IO 0x0000000000000086 : 0xFF >\r\n" | |
| " IO 0x0000000000000087 : 0x00 > q\r\n" | |
| " \r\n" | |
| " * To display PCI configuration space, ss=0000, bb=00, dd=00, ff=00, rr=00:\r\n" | |
| " Shell> mm 000000000000 -PCI\r\n" | |
| " PCI 0x0000000000000000 : 0x86 >\r\n" | |
| " PCI 0x0000000000000001 : 0x80 >\r\n" | |
| " PCI 0x0000000000000002 : 0x30 >\r\n" | |
| " PCI 0x0000000000000003 : 0x11 >\r\n" | |
| " PCI 0x0000000000000004 : 0x06 >\r\n" | |
| " PCI 0x0000000000000005 : 0x00 > q\r\n" | |
| " These contents can also be displayed by 'PCI 00 00 00'.\r\n" | |
| " \r\n" | |
| " * To display PCIE configuration space, ss=0000, bb=06, dd=00, ff=00, rrr=000:\r\n" | |
| " Shell> mm 0000060000000 -PCIE\r\n" | |
| " PCIE 0x0000000060000000 : 0xAB >\r\n" | |
| " PCIE 0x0000000060000001 : 0x11 >\r\n" | |
| " PCIE 0x0000000060000002 : 0x61 >\r\n" | |
| " PCIE 0x0000000060000003 : 0x43 >\r\n" | |
| " \r\n" | |
| #string STR_GET_HELP_LOAD_PCI_ROM #language en-US "" | |
| ".TH loadpcirom 0 "Loads a PCI option ROM file."\r\n" | |
| ".SH NAME\r\n" | |
| "Loads a PCI Option ROM.\r\n" | |
| ".SH SYNOPSIS\r\n" | |
| " \r\n" | |
| "LoadPciRom [-nc] romfile [romfile...]\r\n" | |
| ".SH OPTIONS\r\n" | |
| " \r\n" | |
| " -nc - Loads the ROM image(s) but does not connect drivers.\r\n" | |
| " romfile - Specifies the PCI option ROM image file (wildcards are permitted).\r\n" | |
| ".SH DESCRIPTION\r\n" | |
| " \r\n" | |
| "NOTES:\r\n" | |
| " 1. This command loads PCI option ROM images into memory for\r\n" | |
| " execution.\r\n" | |
| " 2. The file can contain legacy images and multiple PE32 images, in which case\r\n" | |
| " all PE32 images are loaded.\r\n" | |
| ".SH EXAMPLES\r\n" | |
| " \r\n" | |
| "EXAMPLES:\r\n" | |
| " * To load a rom file 'rom.bin':\r\n" | |
| " fs0:\> LoadPciRom rom.bin\r\n" | |
| " \r\n" | |
| " * To load '*.bin' files without connecting drivers:\r\n" | |
| " fs0:\> LoadPciRom -nc *.bin\r\n" | |
| #string STR_GET_HELP_SETVAR #language en-US "" | |
| ".TH setvar 0 "Displays or modifies a UEFI variable."\r\n" | |
| ".SH NAME\r\n" | |
| "Displays or modifies a UEFI variable.\r\n" | |
| ".SH SYNOPSIS\r\n" | |
| " \r\n" | |
| "SETVAR variable-name [-guid guid][-bs][-rt][-nv] [=data]\r\n" | |
| ".SH OPTIONS\r\n" | |
| " \r\n" | |
| " variable-name - Specifies the name of the UEFI variable to modify or display.\r\n" | |
| " -guid - Specifies the GUID of the UEFI variable to modify or display.\r\n" | |
| " If not present, GUID EFI_GLOBAL_VARIABLE is assumed.\r\n" | |
| " -bs - Indicates that the variable is a boot variable. Applies to a new variable;\r\n" | |
| " otherwise, it is ignored. \r\n" | |
| " -rt - Indicates that the variable is a runtime variable. Applies to a new variable;\r\n" | |
| " otherwise, it is ignored. \r\n" | |
| " -nv - Indicates that the variable is non-volatile. If not present,\r\n" | |
| " then the variable is assumed to be volatile. Applies to a new variable;\r\n" | |
| " otherwise, it is ignored. \r\n" | |
| " =data - Specifies there is new data for the variable. If there is nothing after the '='\r\n" | |
| " then the variable is deleted. If '=' is not present, then the\r\n" | |
| " current value of the variable is dumped as hex bytes.\r\n" | |
| " The data can consist of zero or more of the following:\r\n" | |
| " xx[xx] - Hexadecimal bytes\r\n" | |
| " ^"ascii-string^" - ASCII-string with no null-terminator\r\n" | |
| " L^"UCS2-string^" - UCS-2 encoded string with no\r\n" | |
| " null-terminator\r\n" | |
| " --device - Device path text format\r\n" | |
| ".SH DESCRIPTION\r\n" | |
| " \r\n" | |
| "NOTES:\r\n" | |
| " 1. This command changes the UEFI variable specified by name and GUID.\r\n" | |
| " 2. If = is specified, but data is not, the variable is deleted, if it exists.\r\n" | |
| " 3. If = is not specified, then the current variable contents are displayed.\r\n" | |
| " 4. If =data is specified, then the variable's value is changed to the value\r\n" | |
| " specified by data.\r\n" | |
| " 5. -bs, -rt and -nv are only useful if the variable does not exist.\r\n" | |
| " 6. If the variable already exists, the attributes cannot be changed, and the" | |
| " flags will be ignored.\r\n" | |
| ".SH RETURNVALUES\r\n" | |
| " \r\n" | |
| "RETURN VALUES:\r\n" | |
| " SHELL_SUCCESS The shell has stored the variable and its data with\r\n" | |
| " the defined attributes.\r\n" | |
| " SHELL_INVALID_PARAMETER Incorrect attributes were used.\r\n" | |
| " SHELL_OUT_OF_RESOURCES Insufficient resources were available for storing\r\n" | |
| " the variable and its data.\r\n" | |
| " SHELL_DEVICE_ERROR The Variable could not be saved due to a hardware\r\n" | |
| " error.\r\n" | |
| " SHELL_WRITE_PROTECTED The variable in question is read-only.\r\n" | |
| " SHELL_WRITE_PROTECTED The variable in question cannot be deleted.\r\n" | |
| " SHELL_NOT_FOUND The variable could not be found.\r\n" | |
| #string STR_GET_HELP_SERMODE #language en-US "" | |
| ".TH sermode 0 "configure serial port"\r\n" | |
| ".SH NAME\r\n" | |
| "Sets serial port attributes.\r\n" | |
| ".SH SYNOPSIS\r\n" | |
| " \r\n" | |
| "SERMODE [handle [baudrate parity databits stopbits]]\r\n" | |
| ".SH OPTIONS\r\n" | |
| " \r\n" | |
| " handle - Specifies a device handle for a serial port in hexadecimal format.\r\n" | |
| " baudrate - Specifies a baud rate for specified serial port.\r\n" | |
| " parity - Sets parity bit settings for specified serial port. Valid values\r\n" | |
| " are:\r\n" | |
| " d - Default parity\r\n" | |
| " n - No parity\r\n" | |
| " e - Even parity\r\n" | |
| " o - Odd parity\r\n" | |
| " m - Mark parity\r\n" | |
| " s - Space parity\r\n" | |
| " databits - Sets the data bits for the specified serial port.\r\n" | |
| " stopbits - Sets the stop bits for the specified serial port.\r\n" | |
| ".SH DESCRIPTION\r\n" | |
| " \r\n" | |
| "NOTES:\r\n" | |
| " 1. The 'handle' parameter is the device handle of the desired serial port.\r\n" | |
| " The 'DH' command can be used to retrieve this information.\r\n" | |
| " 2. The 'stopbits' parameter supports the following settings:\r\n" | |
| " 0 (0 stop bits - default setting)\r\n" | |
| " 1 (1 stop bit)\r\n" | |
| " 2 (2 stop bits)\r\n" | |
| " 15 (1.5 stop bits)\r\n" | |
| " All other settings are invalid.\r\n" | |
| " 3. The 'baudrate' parameter supports the following settings:\r\n" | |
| " 50, 75, 110, 150, 300, 600, 1200, 1800, 2000, 2400, 3600, 4800,\r\n" | |
| " 7200, 9600(default), 19200, 38400, 57600, 115200, 230400, 460800\r\n" | |
| " All other values will be converted to the next highest setting.\r\n" | |
| " 4. The 'databits' parameter supports the following settings:\r\n" | |
| " 4\r\n" | |
| " 7\r\n" | |
| " 8 (default)\r\n" | |
| " All other settings are invalid.\r\n" | |
| " 5. Parity attributes are mutually exclusive.\r\n" | |
| ".SH EXAMPLES\r\n" | |
| " \r\n" | |
| "EXAMPLES:\r\n" | |
| " * To display the settings for all serial port devices:\r\n" | |
| " Shell> sermode\r\n" | |
| " \r\n" | |
| " * To display the settings for the serial port device whose handle is 0x6B:\r\n" | |
| " Shell> sermode 6B\r\n" | |
| " \r\n" | |
| " * To configure the serial port settings for handle 0x6B to 9600bps, even\r\n" | |
| " parity, 8 data bits, and 1 stop bit:\r\n" | |
| " Shell> sermode 6B 9600 e 8 1\r\n" | |
| ".SH RETURNVALUES\r\n" | |
| " \r\n" | |
| "RETURN VALUES:\r\n" | |
| " SHELL_SUCCESS The new attributes were set on the serial device.\r\n" | |
| " SHELL_INVALID_PARAMETER One or more of the attributes has an unsupported\r\n" | |
| " value.\r\n" | |
| " SHELL_DEVICE_ERROR The serial device is not functioning correctly.\r\n" | |
| #string STR_GET_HELP_PCI #language en-US "" | |
| ".TH pci 0 "Displays PCI device information."\r\n" | |
| ".SH NAME\r\n" | |
| "Displays PCI device list or PCI function configuration space and PCIe extended\r\n" | |
| "configuration space.\r\n" | |
| ".SH SYNOPSIS\r\n" | |
| " \r\n" | |
| "PCI [Bus Dev [Func] [-s Seg] [-i [-ec ID]]]\r\n" | |
| ".SH OPTIONS\r\n" | |
| " \r\n" | |
| " -s - Specifies optional segment number (hexadecimal number).\r\n" | |
| " -i - Displays interpreted information.\r\n" | |
| " -ec - Displays detailed interpretation of specified PCIe extended capability\r\n" | |
| " ID (hexadecimal number).\r\n" | |
| " Bus - Specifies a bus number (hexadecimal number).\r\n" | |
| " Dev - Specifies a device number (hexadecimal number).\r\n" | |
| " Func - Specifies a function number (hexadecimal number).\r\n" | |
| ".SH DESCRIPTION\r\n" | |
| " \r\n" | |
| "NOTES:\r\n" | |
| " 1. This command displays a list of all the PCI devices found in the system. It\r\n" | |
| " also displays the configuration space of a PCI device according to the\r\n" | |
| " specified bus (Bus), device (Dev), and function (Func) addresses. If the\r\n" | |
| " function address is not specified, it defaults to 0.\r\n" | |
| " 2. The -i option displays verbose information for the specified PCI\r\n" | |
| " device. The PCI configuration space for the device is displayed with\r\n" | |
| " a detailed interpretation.\r\n" | |
| " 3. If no parameters are specified, all PCI devices are listed.\r\n" | |
| " 4. If the 'Bus' and 'Dev' parameters are specified but the 'Func' or\r\n" | |
| " 'Seg' parameters are not, Function or Seg are set to the default value of 0.\r\n" | |
| ".SH EXAMPLES\r\n" | |
| " \r\n" | |
| "EXAMPLES:\r\n" | |
| " * To display all PCI devices in the system:\r\n" | |
| " Shell> pci\r\n" | |
| " \r\n" | |
| " * To display the configuration space of Bus 0, Device 0, Function 0:\r\n" | |
| " Shell> pci 00 00 00 -i\r\n" | |
| " \r\n" | |
| " * To display configuration space of Segment 0, Bus 0, Device 0, Function 0:\r\n" | |
| " Shell> pci 00 00 00 -s 0\r\n" | |
| ".SH RETURNVALUES\r\n" | |
| " \r\n" | |
| "RETURN VALUES:\r\n" | |
| " SHELL_SUCCESS Data was displayed as requested.\r\n" | |
| " SHELL_DEVICE_ERROR The specified device parameters did not match a physical\r\n" | |
| " device in the system.\r\n" | |
| #string STR_GET_HELP_SMBIOSVIEW #language en-US "" | |
| ".TH smbiosview 0 "Displays SMBIOS information."\r\n" | |
| ".SH NAME\r\n" | |
| "Displays SMBIOS information.\r\n" | |
| ".SH SYNOPSIS\r\n" | |
| " \r\n" | |
| "SMBIOSVIEW [-t SmbiosType]|[-h SmbiosHandle]|[-s]|[-a]\r\n" | |
| ".SH OPTIONS\r\n" | |
| " \r\n" | |
| " -t - Displays all structures of SmbiosType.\r\n" | |
| " -h - Displays structure of SmbiosHandle.\r\n" | |
| " -s - Displays a statistics table.\r\n" | |
| " -a - Displays all information.\r\n" | |
| " SmbiosType - Specifies a SMBIOS structure type.\r\n" | |
| " SmbiosHandle - Specifies a SMBIOS structure unique 16-bit handle.\r\n" | |
| ".SH DESCRIPTION\r\n" | |
| " \r\n" | |
| "NOTES:\r\n" | |
| " 1. The SmbiosType parameter supports the following types:\n" | |
| " 0 - BIOS Information\r\n" | |
| " 1 - System Information\r\n" | |
| " 2 - Baseboard Information\r\n" | |
| " 3 - System Enclosure\r\n" | |
| " 4 - Processor Information\r\n" | |
| " 5 - Memory Controller Information\r\n" | |
| " 6 - Memory Module Information\r\n" | |
| " 7 - Cache Information\r\n" | |
| " 8 - Port Connector Information\r\n" | |
| " 9 - System Slots\r\n" | |
| " 10 - On Board Devices Information\r\n" | |
| " 11 - OEM Strings\r\n" | |
| " 12 - System Configuration Options\r\n" | |
| " 13 - BIOS Language Information\r\n" | |
| " 14 - Group Associations\r\n" | |
| " 15 - System Event Log\r\n" | |
| " 16 - Physical Memory Array\r\n" | |
| " 17 - Memory Device\r\n" | |
| " 18 - 32-bit Memory Error Information\r\n" | |
| " 19 - Memory Array Mapped Address\r\n" | |
| " 20 - Memory Device Mapped Address\r\n" | |
| " 21 - Built-in Pointing Device\r\n" | |
| " 22 - Portable Battery\r\n" | |
| " 23 - System Reset\r\n" | |
| " 24 - Hardware Security\r\n" | |
| " 25 - System Power Controls\r\n" | |
| " 26 - Voltage Probe\r\n" | |
| " 27 - Cooling Device\r\n" | |
| " 28 - Temperature Probe\r\n" | |
| " 29 - Electrical Current Probe\r\n" | |
| " 30 - Out-Of-Band Remote Access\r\n" | |
| " 31 - Boot Integrity Services (BIS) Entry Point\r\n" | |
| " 32 - System Boot Information\r\n" | |
| " 33 - 64-Bit Memory Error Information\r\n" | |
| " 34 - Management Device\r\n" | |
| " 35 - Management Device Component\r\n" | |
| " 36 - Management Device Threshold Data\r\n" | |
| " 37 - Memory Channel\r\n" | |
| " 38 - IPMI Device Information\r\n" | |
| " 39 - System Power Supply\r\n" | |
| " 40 - Additional Information\r\n" | |
| " 41 - Onboard Devices Extended Information\r\n" | |
| " 42 - Management Controller Host Interface\r\n" | |
| " 43 - TPM Device\r\n" | |
| " 44 - Processor Additional Information\r\n" | |
| " 2. Enter the SmbiosHandle parameter in hexadecimal format.\r\n" | |
| " Do not use the '0x' prefix format for hexadecimal values.\r\n" | |
| " 3. Internal commands:\r\n" | |
| " :q -------- quit smbiosview\r\n" | |
| " :0 -------- Change smbiosview display NONE info\r\n" | |
| " :1 -------- Change smbiosview display OUTLINE info\r\n" | |
| " :2 -------- Change smbiosview display NORMAL info\r\n" | |
| " :3 -------- Change smbiosview display DETAIL info\r\n" | |
| " /? -------- Show help\r\n" | |
| ".SH RETURNVALUES\r\n" | |
| " \r\n" | |
| "RETURN VALUES:\r\n" | |
| " SHELL_SUCCESS Data was displayed as requested.\r\n" | |
| " SHELL_DEVICE_ERROR The requested structure was not found.\r\n" | |
| #string STR_GET_HELP_DMPSTORE #language en-US "" | |
| ".TH dmpstore 0 "Manages all UEFI variables."\r\n" | |
| ".SH NAME\r\n" | |
| "Manages all UEFI variables.\r\n" | |
| ".SH SYNOPSIS\r\n" | |
| " \r\n" | |
| "DMPSTORE [-b] [-d] [-all | ([variable] [-guid guid])] [-sfo]\r\n" | |
| "DMPSTORE [-all | ([variable] [-guid guid])] [-s file]\r\n" | |
| "DMPSTORE [-all | ([variable] [-guid guid])] [-l file]\r\n" | |
| ".SH OPTIONS\r\n" | |
| " \r\n" | |
| " -b - Displays one screen at a time.\r\n" | |
| " -guid - Specifies the GUID of the variables to be displayed in\r\n" | |
| " standard text format. If not specified and -all is not\r\n" | |
| " specified, the EFI_GLOBAL_VARIABLE GUID is assumed.\r\n" | |
| " -sfo - Displays information as described in Standard-Format Output.\r\n" | |
| " -all - Dumps all variables, including those\r\n" | |
| " with a different GUID than EFI_GLOBAL_VARIABLE.\r\n" | |
| " -d - Delete variables.\r\n" | |
| " -s - Saves variables to a file.\r\n" | |
| " -l - Loads and sets variables from a file.\r\n" | |
| " variable - Specifies a variable name. This can be a literal name or\r\n" | |
| " a pattern as specified in the MetaiMatch() function of the\r\n" | |
| " EFI_UNICODE_COLLATION2_PROCOOL.\r\n" | |
| ".SH DESCRIPTION\r\n" | |
| " \r\n" | |
| "NOTES:\r\n" | |
| " 1. This command manages the UEFI variables. The variables\r\n" | |
| " displayed or deleted depend on the command line options, as specified in\r\n" | |
| " the following table:\r\n" | |
| " Variable GUID -all Description\r\n" | |
| " --- --- --- All variables with the GUID EFI_GLOBAL_VARIABLE will\r\n" | |
| " be operated on.\r\n" | |
| " --- --- X All variables (regardless of GUID or name) will be\r\n" | |
| " operated on.\r\n" | |
| " --- X --- All variables with the specified GUID will be\r\n" | |
| " operated on.\r\n" | |
| " X --- --- The variable with the GUID EFI_GLOBAL_VARIABLE and\r\n" | |
| " the name Variable will be operated on.\r\n" | |
| " X X --- The variable with the specified GUID and name\r\n" | |
| " Variable will be operated on.\r\n" | |
| " 2. The variable value is printed as a hexadecimal dump.\r\n" | |
| " 3. Option -d is used to delete variables. Option -s and -l are used to save\r\n" | |
| " and load variables to and from a file. The variable name can be specified\r\n" | |
| " when using these flags so that the operation only takes effect on\r\n" | |
| " that variable.\r\n" | |
| ".SH EXAMPLES\r\n" | |
| " \r\n" | |
| "EXAMPLES:\r\n" | |
| " * To dump all variables with the GUID EFI_GLOBAL_VARIABLE:\r\n" | |
| " Shell> dmpstore\r\n" | |
| " \r\n" | |
| " * To dump all variables (regardless of GUID or name):\r\n" | |
| " Shell> dmpstore -all\r\n" | |
| " \r\n" | |
| " * To dump the 'path' variable with the GUID '158DEF5A-F656-419C-B027-\r\n" | |
| " 7A3192C079D2':\r\n" | |
| " Shell> dmpstore path -guid 158DEF5A-F656-419C-B027-7A3192C079D2\r\n" | |
| " \r\n" | |
| " * To save all variables (regardless of GUID or name) to a file 'VarDump.txt':\r\n" | |
| " fs0:\> dmpstore -all -s VarDump.txt\r\n" | |
| " \r\n" | |
| " * To delete the 'BootOrder' variable with the GUID EFI_GLOBAL_VARIABLE:\r\n" | |
| " Shell> dmpstore -d BootOrder\r\n" | |
| ".SH RETURNVALUES\r\n" | |
| " \r\n" | |
| "RETURN VALUES:\r\n" | |
| " SHELL_SUCCESS The action was completed as requested.\r\n" | |
| " SHELL_INVALID_PARAMETER One of the passed-in parameters was incorrectly\r\n" | |
| " formatted or its value was out of bounds.\r\n" | |
| #string STR_GET_HELP_DBLK #language en-US "" | |
| ".TH dblk 0 "Displays one or more blocks from a block device."\r\n" | |
| ".SH NAME\r\n" | |
| "Displays one or more blocks from a block device.\r\n" | |
| ".SH SYNOPSIS\r\n" | |
| " \r\n" | |
| "DBLK device [lba] [blocks] [-b]\r\n" | |
| ".SH OPTIONS\r\n" | |
| " \r\n" | |
| " -b - Displays one screen at a time.\r\n" | |
| " device - Blocks the device name.\r\n" | |
| " lba - Specifies the index of the first block to be displayed (a hexadecimal number).\r\n" | |
| " The default is 0.\r\n" | |
| " blocks - Specifies the number of blocks to display (a hexadecimal number). The default\r\n" | |
| " is 1. If larger than 0x10, then only 0x10 are displayed.\r\n" | |
| ".SH DESCRIPTION\r\n" | |
| " \r\n" | |
| "NOTES:\r\n" | |
| " 1. This command displays the contents of one or more blocks from a block\r\n" | |
| " device. Enter a hexidecimal value for the lba and blocks variables. If lba is not\r\n" | |
| " specified, block #0 is assumed. If blocks is not specified, on1y one\r\n" | |
| " block is displayed. The maximum number of blocks that can be\r\n" | |
| " displayed at one time is 0x10.\r\n" | |
| " 2. If an MBR is found on the block, the partition information is displayed\r\n" | |
| " after all the block contents are displayed.\r\n" | |
| " 3. If the block is a FAT partition, some FAT parameters are displayed\r\n" | |
| " (label, systemid, oemid, sectorsize, clustersize, media, and so forth) after all the\r\n" | |
| " blocks are displayed.\r\n" | |
| ".SH EXAMPLES\r\n" | |
| " \r\n" | |
| "EXAMPLES:\r\n" | |
| " * To display one block of blk0, beginning from block 0:\r\n" | |
| " Shell> dblk blk0\r\n" | |
| " \r\n" | |
| " * To display one block of fs0, beginning from block 0x2:\r\n" | |
| " Shell> dblk fs0 2\r\n" | |
| " \r\n" | |
| " * To display 0x5 blocks of fs0, beginning from block 0x12:\r\n" | |
| " Shell> dblk fs0 12 5\r\n" | |
| " \r\n" | |
| " * To display 0x10 blocks of fs0, beginning from block 0x12:\r\n" | |
| " Shell> dblk fs0 12 10\r\n" | |
| " \r\n" | |
| " * To attempt to display more than 0x10 blocks, resulting in only 0x10\r\n" | |
| " blocks being displayed:\r\n" | |
| " Shell> dblk fs0 12 20\r\n" | |
| " \r\n" | |
| " * To display one block of blk2, beginning from the first block (blk0):\r\n" | |
| " fs1:\tmps1> dblk blk2 0 1\r\n" | |
| " \r\n" | |
| #string STR_GET_HELP_EDIT #language en-US "" | |
| ".TH edit 0 "Provides a full screen text editor for ASCII or UCS-2 files."\r\n" | |
| ".SH NAME\r\n" | |
| "Provides a full screen text editor for ASCII or UCS-2 files.\r\n" | |
| ".SH SYNOPSIS\r\n" | |
| " \r\n" | |
| "EDIT [file]\r\n" | |
| ".SH OPTIONS\r\n" | |
| " \r\n" | |
| " file - Specifies the name of file to be edited. If none is specified, an empty file\r\n" | |
| " is created with a default file name.\r\n" | |
| ".SH DESCRIPTION\r\n" | |
| " \r\n" | |
| "NOTES:\r\n" | |
| " 1. This command enables full screen file editing.\r\n" | |
| " 2. The editor supports both UCS-2 and ASCII file types.\r\n" | |
| ".SH EXAMPLES\r\n" | |
| " \r\n" | |
| "EXAMPLES:\r\n" | |
| " * To edit the 'shell.log' file:\r\n" | |
| " fs0:\> edit shell.log\r\n" | |
| #string STR_GET_HELP_HEXEDIT #language en-US "" | |
| ".TH hexedit 0 "Provides a full screen hex editor for files, block devices, or memory."\r\n" | |
| ".SH NAME\r\n" | |
| "Provides a full screen hex editor for files, block devices, or memory.\r\n" | |
| ".SH SYNOPSIS\r\n" | |
| " \r\n" | |
| "HEXEDIT [[-f] filename| [-d diskname offset size] | [-m address size]]\r\n" | |
| ".SH OPTIONS\r\n" | |
| " \r\n" | |
| " -f - Specifies the name of the file to edit.\r\n" | |
| " -d - Specifies the disk block to edit:\r\n" | |
| " DiskName - Name of the disk to edit (for example fs0)\r\n" | |
| " Offset - Starting block number (beginning from 0)\r\n" | |
| " Size - Number of blocks to edit\r\n" | |
| " -m - Specifies the memory region to edit:\r\n" | |
| " Address - Starting 32-bit memory address (beginning from 0)\r\n" | |
| " Size - Size of memory region to edit in bytes\r\n" | |
| ".SH DESCRIPTION\r\n" | |
| " \r\n" | |
| "NOTES:\r\n" | |
| " 1. This command enables you to edit a file, block device, or memory region.\r\n" | |
| " 2. The region being edited is displayed as hexadecimal bytes. The\r\n" | |
| " contents can be modified and saved.\r\n" | |
| ".SH EXAMPLES\r\n" | |
| " \r\n" | |
| "EXAMPLES:\r\n" | |
| " * To edit a file in hex mode:\r\n" | |
| " fs0:\> hexedit test.bin\r\n" | |
| " \r\n" | |
| " * To edit block device fs0 starting at block 0 with size of 2 blocks:\r\n" | |
| " fs0:\> hexedit -d fs0 0 2\r\n" | |
| " \r\n" | |
| " * To edit memory region starting at address 0x00000000 with size of 2 bytes:\r\n" | |
| " fs0:\> hexedit -m 0 2\r\n" |