/** @file | |
EFI IOMMU Protocol. | |
Copyright (c) 2017, Intel Corporation. All rights reserved.<BR> | |
SPDX-License-Identifier: BSD-2-Clause-Patent | |
**/ | |
#ifndef __IOMMU_H__ | |
#define __IOMMU_H__ | |
// | |
// IOMMU Protocol GUID value | |
// | |
#define EDKII_IOMMU_PROTOCOL_GUID \ | |
{ \ | |
0x4e939de9, 0xd948, 0x4b0f, { 0x88, 0xed, 0xe6, 0xe1, 0xce, 0x51, 0x7c, 0x1e } \ | |
} | |
// | |
// Forward reference for pure ANSI compatability | |
// | |
typedef struct _EDKII_IOMMU_PROTOCOL EDKII_IOMMU_PROTOCOL; | |
// | |
// Revision The revision to which the IOMMU interface adheres. | |
// All future revisions must be backwards compatible. | |
// If a future version is not back wards compatible it is not the same GUID. | |
// | |
#define EDKII_IOMMU_PROTOCOL_REVISION 0x00010000 | |
// | |
// IOMMU Access for SetAttribute | |
// | |
// These types can be "ORed" together as needed. | |
// Any undefined bits are reserved and must be zero. | |
// | |
#define EDKII_IOMMU_ACCESS_READ 0x1 | |
#define EDKII_IOMMU_ACCESS_WRITE 0x2 | |
// | |
// IOMMU Operation for Map | |
// | |
typedef enum { | |
/// | |
/// A read operation from system memory by a bus master that is not capable of producing | |
/// PCI dual address cycles. | |
/// | |
EdkiiIoMmuOperationBusMasterRead, | |
/// | |
/// A write operation from system memory by a bus master that is not capable of producing | |
/// PCI dual address cycles. | |
/// | |
EdkiiIoMmuOperationBusMasterWrite, | |
/// | |
/// Provides both read and write access to system memory by both the processor and a bus | |
/// master that is not capable of producing PCI dual address cycles. | |
/// | |
EdkiiIoMmuOperationBusMasterCommonBuffer, | |
/// | |
/// A read operation from system memory by a bus master that is capable of producing PCI | |
/// dual address cycles. | |
/// | |
EdkiiIoMmuOperationBusMasterRead64, | |
/// | |
/// A write operation to system memory by a bus master that is capable of producing PCI | |
/// dual address cycles. | |
/// | |
EdkiiIoMmuOperationBusMasterWrite64, | |
/// | |
/// Provides both read and write access to system memory by both the processor and a bus | |
/// master that is capable of producing PCI dual address cycles. | |
/// | |
EdkiiIoMmuOperationBusMasterCommonBuffer64, | |
EdkiiIoMmuOperationMaximum | |
} EDKII_IOMMU_OPERATION; | |
// | |
// IOMMU attribute for AllocateBuffer | |
// Any undefined bits are reserved and must be zero. | |
// | |
#define EDKII_IOMMU_ATTRIBUTE_MEMORY_WRITE_COMBINE 0x0080 | |
#define EDKII_IOMMU_ATTRIBUTE_MEMORY_CACHED 0x0800 | |
#define EDKII_IOMMU_ATTRIBUTE_DUAL_ADDRESS_CYCLE 0x8000 | |
#define EDKII_IOMMU_ATTRIBUTE_VALID_FOR_ALLOCATE_BUFFER (EDKII_IOMMU_ATTRIBUTE_MEMORY_WRITE_COMBINE | EDKII_IOMMU_ATTRIBUTE_MEMORY_CACHED | EDKII_IOMMU_ATTRIBUTE_DUAL_ADDRESS_CYCLE) | |
#define EDKII_IOMMU_ATTRIBUTE_INVALID_FOR_ALLOCATE_BUFFER (~EDKII_IOMMU_ATTRIBUTE_VALID_FOR_ALLOCATE_BUFFER) | |
/** | |
Set IOMMU attribute for a system memory. | |
If the IOMMU protocol exists, the system memory cannot be used | |
for DMA by default. | |
When a device requests a DMA access for a system memory, | |
the device driver need use SetAttribute() to update the IOMMU | |
attribute to request DMA access (read and/or write). | |
The DeviceHandle is used to identify which device submits the request. | |
The IOMMU implementation need translate the device path to an IOMMU device ID, | |
and set IOMMU hardware register accordingly. | |
1) DeviceHandle can be a standard PCI device. | |
The memory for BusMasterRead need set EDKII_IOMMU_ACCESS_READ. | |
The memory for BusMasterWrite need set EDKII_IOMMU_ACCESS_WRITE. | |
The memory for BusMasterCommonBuffer need set EDKII_IOMMU_ACCESS_READ|EDKII_IOMMU_ACCESS_WRITE. | |
After the memory is used, the memory need set 0 to keep it being protected. | |
2) DeviceHandle can be an ACPI device (ISA, I2C, SPI, etc). | |
The memory for DMA access need set EDKII_IOMMU_ACCESS_READ and/or EDKII_IOMMU_ACCESS_WRITE. | |
@param[in] This The protocol instance pointer. | |
@param[in] DeviceHandle The device who initiates the DMA access request. | |
@param[in] Mapping The mapping value returned from Map(). | |
@param[in] IoMmuAccess The IOMMU access. | |
@retval EFI_SUCCESS The IoMmuAccess is set for the memory range specified by DeviceAddress and Length. | |
@retval EFI_INVALID_PARAMETER DeviceHandle is an invalid handle. | |
@retval EFI_INVALID_PARAMETER Mapping is not a value that was returned by Map(). | |
@retval EFI_INVALID_PARAMETER IoMmuAccess specified an illegal combination of access. | |
@retval EFI_UNSUPPORTED DeviceHandle is unknown by the IOMMU. | |
@retval EFI_UNSUPPORTED The bit mask of IoMmuAccess is not supported by the IOMMU. | |
@retval EFI_UNSUPPORTED The IOMMU does not support the memory range specified by Mapping. | |
@retval EFI_OUT_OF_RESOURCES There are not enough resources available to modify the IOMMU access. | |
@retval EFI_DEVICE_ERROR The IOMMU device reported an error while attempting the operation. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EDKII_IOMMU_SET_ATTRIBUTE)( | |
IN EDKII_IOMMU_PROTOCOL *This, | |
IN EFI_HANDLE DeviceHandle, | |
IN VOID *Mapping, | |
IN UINT64 IoMmuAccess | |
); | |
/** | |
Provides the controller-specific addresses required to access system memory from a | |
DMA bus master. | |
@param This The protocol instance pointer. | |
@param Operation Indicates if the bus master is going to read or write to system memory. | |
@param HostAddress The system memory address to map to the PCI controller. | |
@param NumberOfBytes On input the number of bytes to map. On output the number of bytes | |
that were mapped. | |
@param DeviceAddress The resulting map address for the bus master PCI controller to use to | |
access the hosts HostAddress. | |
@param Mapping A resulting value to pass to Unmap(). | |
@retval EFI_SUCCESS The range was mapped for the returned NumberOfBytes. | |
@retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a common buffer. | |
@retval EFI_INVALID_PARAMETER One or more parameters are invalid. | |
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. | |
@retval EFI_DEVICE_ERROR The system hardware could not map the requested address. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EDKII_IOMMU_MAP)( | |
IN EDKII_IOMMU_PROTOCOL *This, | |
IN EDKII_IOMMU_OPERATION Operation, | |
IN VOID *HostAddress, | |
IN OUT UINTN *NumberOfBytes, | |
OUT EFI_PHYSICAL_ADDRESS *DeviceAddress, | |
OUT VOID **Mapping | |
); | |
/** | |
Completes the Map() operation and releases any corresponding resources. | |
@param This The protocol instance pointer. | |
@param Mapping The mapping value returned from Map(). | |
@retval EFI_SUCCESS The range was unmapped. | |
@retval EFI_INVALID_PARAMETER Mapping is not a value that was returned by Map(). | |
@retval EFI_DEVICE_ERROR The data was not committed to the target system memory. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EDKII_IOMMU_UNMAP)( | |
IN EDKII_IOMMU_PROTOCOL *This, | |
IN VOID *Mapping | |
); | |
/** | |
Allocates pages that are suitable for an OperationBusMasterCommonBuffer or | |
OperationBusMasterCommonBuffer64 mapping. | |
@param This The protocol instance pointer. | |
@param Type This parameter is not used and must be ignored. | |
@param MemoryType The type of memory to allocate, EfiBootServicesData or | |
EfiRuntimeServicesData. | |
@param Pages The number of pages to allocate. | |
@param HostAddress A pointer to store the base system memory address of the | |
allocated range. | |
@param Attributes The requested bit mask of attributes for the allocated range. | |
@retval EFI_SUCCESS The requested memory pages were allocated. | |
@retval EFI_UNSUPPORTED Attributes is unsupported. The only legal attribute bits are | |
MEMORY_WRITE_COMBINE, MEMORY_CACHED and DUAL_ADDRESS_CYCLE. | |
@retval EFI_INVALID_PARAMETER One or more parameters are invalid. | |
@retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated. | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EDKII_IOMMU_ALLOCATE_BUFFER)( | |
IN EDKII_IOMMU_PROTOCOL *This, | |
IN EFI_ALLOCATE_TYPE Type, | |
IN EFI_MEMORY_TYPE MemoryType, | |
IN UINTN Pages, | |
IN OUT VOID **HostAddress, | |
IN UINT64 Attributes | |
); | |
/** | |
Frees memory that was allocated with AllocateBuffer(). | |
@param This The protocol instance pointer. | |
@param Pages The number of pages to free. | |
@param HostAddress The base system memory address of the allocated range. | |
@retval EFI_SUCCESS The requested memory pages were freed. | |
@retval EFI_INVALID_PARAMETER The memory range specified by HostAddress and Pages | |
was not allocated with AllocateBuffer(). | |
**/ | |
typedef | |
EFI_STATUS | |
(EFIAPI *EDKII_IOMMU_FREE_BUFFER)( | |
IN EDKII_IOMMU_PROTOCOL *This, | |
IN UINTN Pages, | |
IN VOID *HostAddress | |
); | |
/// | |
/// IOMMU Protocol structure. | |
/// | |
struct _EDKII_IOMMU_PROTOCOL { | |
UINT64 Revision; | |
EDKII_IOMMU_SET_ATTRIBUTE SetAttribute; | |
EDKII_IOMMU_MAP Map; | |
EDKII_IOMMU_UNMAP Unmap; | |
EDKII_IOMMU_ALLOCATE_BUFFER AllocateBuffer; | |
EDKII_IOMMU_FREE_BUFFER FreeBuffer; | |
}; | |
/// | |
/// IOMMU Protocol GUID variable. | |
/// | |
extern EFI_GUID gEdkiiIoMmuProtocolGuid; | |
#endif |