/* | |
* Copyright (c) 2020, Rebecca Cran <rebecca@bsdio.com> | |
* Copyright (c) 2014, Pluribus Networks, Inc. | |
* | |
* SPDX-License-Identifier: BSD-2-Clause-Patent | |
*/ | |
#include "Platform.h" | |
#define EFI_ACPI_OEM_TABLE_ID SIGNATURE_64('B','V','F','A','C','P',' ',' ') | |
EFI_ACPI_3_0_FIXED_ACPI_DESCRIPTION_TABLE FACP = { | |
{ | |
EFI_ACPI_3_0_FIXED_ACPI_DESCRIPTION_TABLE_SIGNATURE, | |
sizeof (EFI_ACPI_3_0_FIXED_ACPI_DESCRIPTION_TABLE), | |
EFI_ACPI_3_0_FIXED_ACPI_DESCRIPTION_TABLE_REVISION, | |
0, // to make sum of entire table == 0 | |
{EFI_ACPI_OEM_ID}, // OEMID is a 6 bytes long field | |
EFI_ACPI_OEM_TABLE_ID, // OEM table identification(8 bytes long) | |
EFI_ACPI_OEM_REVISION, // OEM revision number | |
EFI_ACPI_CREATOR_ID, // ASL compiler vendor ID | |
EFI_ACPI_CREATOR_REVISION // ASL compiler revision number | |
}, | |
0, // Physical addesss of FACS | |
0, // Physical address of DSDT | |
INT_MODEL, // System Interrupt Model | |
RESERVED, // reserved | |
SCI_INT_VECTOR, // System vector of SCI interrupt | |
SMI_CMD_IO_PORT, // Port address of SMI command port | |
ACPI_ENABLE, // value to write to port smi_cmd to enable ACPI | |
ACPI_DISABLE, // value to write to port smi_cmd to disable ACPI | |
S4BIOS_REQ, // Value to write to SMI CMD port to enter the S4BIOS state | |
0, // PState control | |
PM1a_EVT_BLK, // Port address of Power Mgt 1a Event Reg Blk | |
PM1b_EVT_BLK, // Port address of Power Mgt 1b Event Reg Blk | |
PM1a_CNT_BLK, // Port address of Power Mgt 1a Ctrl Reg Blk | |
PM1b_CNT_BLK, // Port address of Power Mgt 1b Ctrl Reg Blk | |
PM2_CNT_BLK, // Port address of Power Mgt 2 Ctrl Reg Blk | |
PM_TMR_BLK, // Port address of Power Mgt Timer Ctrl Reg Blk | |
GPE0_BLK, // Port addr of General Purpose Event 0 Reg Blk | |
GPE1_BLK, // Port addr of General Purpose Event 1 Reg Blk | |
PM1_EVT_LEN, // Byte Length of ports at pm1X_evt_blk | |
PM1_CNT_LEN, // Byte Length of ports at pm1X_cnt_blk | |
PM2_CNT_LEN, // Byte Length of ports at pm2_cnt_blk | |
PM_TM_LEN, // Byte Length of ports at pm_tm_blk | |
GPE0_BLK_LEN, // Byte Length of ports at gpe0_blk | |
GPE1_BLK_LEN, // Byte Length of ports at gpe1_blk | |
GPE1_BASE, // offset in gpe model where gpe1 events start | |
0, // _CST support | |
P_LVL2_LAT, // worst case HW latency to enter/exit C2 state | |
P_LVL3_LAT, // worst case HW latency to enter/exit C3 state | |
FLUSH_SIZE, // Size of area read to flush caches | |
FLUSH_STRIDE, // Stride used in flushing caches | |
DUTY_OFFSET, // bit location of duty cycle field in p_cnt reg | |
DUTY_WIDTH, // bit width of duty cycle field in p_cnt reg | |
DAY_ALRM, // index to day-of-month alarm in RTC CMOS RAM | |
MON_ALRM, // index to month-of-year alarm in RTC CMOS RAM | |
CENTURY, // index to century in RTC CMOS RAM | |
IAPC_BOOT_ARCH, // Boot architecture flag | |
RESERVED, // reserved | |
FACP_FLAGS, | |
FACP_RESET_REG, | |
FACP_RESET_VAL, | |
}; | |
VOID* | |
ReferenceAcpiTable ( | |
VOID | |
) | |
{ | |
// | |
// Reference the table being generated to prevent the optimizer from removing the | |
// data structure from the exeutable | |
// | |
return (VOID*)&FACP; | |
} |