/// @file | |
/// Low level IPF routines used by the debug support driver | |
/// | |
/// Copyright (c) 2006 - 2008, Intel Corporation | |
/// All rights reserved. This program and the accompanying materials | |
/// are licensed and made available under the terms and conditions of the BSD License | |
/// which accompanies this distribution. The full text of the license may be found at | |
/// http://opensource.org/licenses/bsd-license.php | |
/// | |
/// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
/// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
/// | |
/// | |
#include "Common.i" | |
#include "Ds64Macros.i" | |
ASM_GLOBAL PatchSaveBuffer | |
ASM_GLOBAL IpfContextBuf | |
ASM_GLOBAL CommonHandler | |
ASM_GLOBAL ExternalInterruptCount | |
///////////////////////////////////////////// | |
// | |
// Name: | |
// InstructionCacheFlush | |
// | |
// Description: | |
// Flushes instruction cache for specified number of bytes | |
// | |
ASM_GLOBAL InstructionCacheFlush | |
.proc InstructionCacheFlush | |
.align 32 | |
InstructionCacheFlush:: | |
{ .mii | |
alloc r3=2, 0, 0, 0 | |
cmp4.leu p0,p6=32, r33;; | |
(p6) mov r33=32;; | |
} | |
{ .mii | |
nop.m 0 | |
zxt4 r29=r33;; | |
dep.z r30=r29, 0, 5;; | |
} | |
{ .mii | |
cmp4.eq p0,p7=r0, r30 | |
shr.u r28=r29, 5;; | |
(p7) adds r28=1, r28;; | |
} | |
{ .mii | |
nop.m 0 | |
shl r27=r28, 5;; | |
zxt4 r26=r27;; | |
} | |
{ .mfb | |
add r31=r26, r32 | |
nop.f 0 | |
nop.b 0 | |
} | |
LoopBack: // $L143: | |
{ .mii | |
fc r32 | |
adds r32=32, r32;; | |
cmp.ltu p14,p15=r32, r31 | |
} | |
{ .mfb | |
nop.m 0 | |
nop.f 0 | |
//(p14) br.cond.dptk.few $L143#;; | |
(p14) br.cond.dptk.few LoopBack;; | |
} | |
{ .mmi | |
sync.i;; | |
srlz.i | |
nop.i 0;; | |
} | |
{ .mfb | |
nop.m 0 | |
nop.f 0 | |
br.ret.sptk.few b0;; | |
} | |
.endp InstructionCacheFlush | |
///////////////////////////////////////////// | |
// | |
// Name: | |
// ChainHandler | |
// | |
// Description: | |
// Chains an interrupt handler | |
// | |
// The purpose of this function is to enable chaining of the external interrupt. | |
// Since there's no clean SAL abstraction for doing this, we must do it | |
// surreptitiously. | |
// | |
// The reserved IVT entry at offset 0x3400 is coopted for use by this handler. | |
// According to Itanium architecture, it is reserved. Strictly speaking, this is | |
// not safe, as we're cheating and violating the Itanium architecture. However, | |
// as long as we're the only ones cheating, we should be OK. Without hooks in | |
// the SAL to enable IVT management, there aren't many good options. | |
// | |
// The strategy is to replace the first bundle of the external interrupt handler | |
// with our own that will branch into a piece of code we've supplied and located | |
// in the reserved IVT entry. Only the first bundle of the external interrupt | |
// IVT entry is modified. | |
// | |
// The original bundle is moved and relocated to space | |
// allocated within the reserved IVT entry. The next bundle following is | |
// is generated to go a hard coded branch back to the second bundle of the | |
// external interrupt IVT entry just in case the first bundle had no branch. | |
// | |
// Our new code will execute our handler, and then fall through to the | |
// original bundle after restoring all context appropriately. | |
// | |
// The following is a representation of what the IVT memory map looks like with | |
// our chained handler installed: | |
// | |
// | |
// | |
// | |
// | |
// This IVT entry is Failsafe bundle | |
// reserved by the | |
// Itanium architecture Original bundle 0 | |
// and is used for | |
// for locating our | |
// handler and the | |
// original bundle Patch code... | |
// zero of the ext | |
// interrupt handler | |
// | |
// RSVD (3400) Unused | |
// | |
// | |
// | |
// | |
// | |
// | |
// | |
// | |
// | |
// | |
// | |
// | |
// EXT_INT (3000) Bundle 0 Bundle zero - This one is | |
// modified, all other bundles | |
// in the EXT_INT entry are | |
// untouched. | |
// | |
// | |
// Arguments: | |
// | |
// Returns: | |
// | |
// Notes: | |
// | |
// | |
ASM_GLOBAL ChainHandler | |
.proc ChainHandler | |
ChainHandler: | |
NESTED_SETUP( 0,2+3,3,0 ) | |
mov r8=1 // r8 = success | |
mov r2=cr.iva;; | |
// | |
// NOTE: There's a potential hazard here in that we're simply stealing a bunch of | |
// bundles (memory) from the IVT and assuming there's no catastrophic side effect. | |
// | |
// First, save IVT area we're taking over with the patch so we can restore it later | |
// | |
addl out0=PATCH_ENTRY_OFFSET, r2 // out0 = source buffer | |
movl out1=PatchSaveBuffer // out1 = destination buffer | |
mov out2=0x40;; // out2 = number of bundles to copy... save entire IDT entry | |
br.call.sptk.few b0 = CopyBundles | |
// Next, copy the patch code into the IVT | |
movl out0=PatchCode // out0 = source buffer of patch code | |
addl out1=PATCH_OFFSET, r2 // out1 = destination buffer - in IVT | |
mov out2=PATCH_CODE_SIZE;; | |
shr out2=out2, 4;; // out2 = number of bundles to copy | |
br.call.sptk.few b0 = CopyBundles | |
// copy original bundle 0 from the external interrupt handler to the | |
// appropriate place in the reserved IVT interrupt slot | |
addl out0=EXT_INT_ENTRY_OFFSET, r2 // out0 = source buffer | |
addl out1=RELOCATED_EXT_INT, r2 // out1 = destination buffer - in reserved IVT | |
mov out2=1;; // out2 = copy 1 bundle | |
br.call.sptk.few b0 = CopyBundles | |
// Now relocate it there because it very likely had a branch instruction that | |
// that must now be fixed up. | |
addl out0=RELOCATED_EXT_INT, r2 // out0 = new runtime address of bundle - in reserved IVT | |
addl out1=EXT_INT_ENTRY_OFFSET, r2;;// out1 = IP address of previous location | |
mov out2=out0;; // out2 = IP address of new location | |
br.call.sptk.few b0 = RelocateBundle | |
// Now copy into the failsafe branch into the next bundle just in case | |
// the original ext int bundle 0 bundle did not contain a branch instruction | |
movl out0=FailsafeBranch // out0 = source buffer | |
addl out1=FAILSAFE_BRANCH_OFFSET, r2 // out1 = destination buffer - in reserved IVT | |
mov out2=1;; // out2 = copy 1 bundle | |
br.call.sptk.few b0 = CopyBundles | |
// Last, copy in our replacement for the external interrupt IVT entry bundle 0 | |
movl out0=PatchCodeNewBun0 // out0 = source buffer - our replacement bundle 0 | |
addl out1=EXT_INT_ENTRY_OFFSET, r2 // out1 = destination buffer - bundle 0 of External interrupt entry | |
mov out2=1;; // out2 = copy 1 bundle | |
br.call.sptk.few b0 = CopyBundles | |
ChainHandlerDone: | |
NESTED_RETURN | |
.endp ChainHandler | |
///////////////////////////////////////////// | |
// | |
// Name: | |
// UnchainHandler | |
// | |
// Description: | |
// Unchains an interrupt handler | |
// | |
// Arguments: | |
// | |
// Returns: | |
// | |
// Notes: | |
// | |
// | |
ASM_GLOBAL UnchainHandler | |
.proc UnchainHandler | |
UnchainHandler: | |
NESTED_SETUP( 0,2+3,3,0 ) | |
mov r8=1 // r8 = success | |
mov r2=cr.iva;; // r2 = interrupt vector address | |
// First copy original Ext Int bundle 0 back to it's proper home... | |
addl out0=RELOCATED_EXT_INT, r2 // out0 = source - in reserved IVT | |
addl out1=EXT_INT_ENTRY_OFFSET, r2 // out1 = destination buffer - first bundle of Ext Int entry | |
mov out2=1;; // out2 = copy 1 bundle | |
br.call.sptk.few b0 = CopyBundles | |
// Now, relocate it again... | |
addl out0=EXT_INT_ENTRY_OFFSET, r2 // out1 = New runtime address | |
addl out1=RELOCATED_EXT_INT, r2;; // out0 = IP address of previous location | |
mov out2=out0;; // out2 = IP address of new location | |
br.call.sptk.few b0 = RelocateBundle | |
// Last, restore the patch area | |
movl out0=PatchSaveBuffer // out0 = source buffer | |
addl out1=PATCH_ENTRY_OFFSET, r2 // out1 = destination buffer | |
mov out2=0x40;; // out2 = number of bundles to copy... save entire IDT entry | |
br.call.sptk.few b0 = CopyBundles | |
UnchainHandlerDone: | |
NESTED_RETURN | |
.endp UnchainHandler | |
///////////////////////////////////////////// | |
// | |
// Name: | |
// CopyBundles | |
// | |
// Description: | |
// Copies instruction bundles - flushes icache as necessary | |
// | |
// Arguments: | |
// in0 - Bundle source | |
// in1 - Bundle destination | |
// in2 - Bundle count | |
// | |
// Returns: | |
// | |
// Notes: | |
// This procedure is a leaf routine | |
// | |
.proc CopyBundles | |
CopyBundles: | |
NESTED_SETUP(3,2+1,0,0) | |
shl in2=in2, 1;; // in2 = count of 8 byte blocks to copy | |
CopyBundlesLoop: | |
cmp.eq p14, p15 = 0, in2;; // Check if done | |
(p14) br.sptk.few CopyBundlesDone;; | |
ld8 loc2=[in0], 0x8;; // loc2 = source bytes | |
st8 [in1]=loc2;; // [in1] = destination bytes | |
fc in1;; // Flush instruction cache | |
sync.i;; // Ensure local and remote data/inst caches in sync | |
srlz.i;; // Ensure sync has been observed | |
add in1=0x8, in1;; // in1 = next destination | |
add in2=-1, in2;; // in2 = decrement 8 bytes blocks to copy | |
br.sptk.few CopyBundlesLoop;; | |
CopyBundlesDone: | |
NESTED_RETURN | |
.endp CopyBundles | |
///////////////////////////////////////////// | |
// | |
// Name: | |
// RelocateBundle | |
// | |
// Description: | |
// Relocates an instruction bundle by updating any ip-relative branch instructions. | |
// | |
// Arguments: | |
// in0 - Runtime address of bundle | |
// in1 - IP address of previous location of bundle | |
// in2 - IP address of new location of bundle | |
// | |
// Returns: | |
// in0 - 1 if successful or 0 if unsuccessful | |
// | |
// Notes: | |
// This routine examines all slots in the given bundle that are destined for the | |
// branch execution unit. If any of these slots contain an IP-relative branch | |
// namely instructions B1, B2, B3, or B6, the slot is fixed-up with a new relative | |
// address. Errors can occur if a branch cannot be reached. | |
// | |
.proc RelocateBundle | |
RelocateBundle: | |
NESTED_SETUP(3,2+4,3,0) | |
mov loc2=SLOT0 // loc2 = slot index | |
mov loc5=in0;; // loc5 = runtime address of bundle | |
mov in0=1;; // in0 = success | |
RelocateBundleNextSlot: | |
cmp.ge p14, p15 = SLOT2, loc2;; // Check if maximum slot | |
(p15) br.sptk.few RelocateBundleDone | |
mov out0=loc5;; // out0 = runtime address of bundle | |
br.call.sptk.few b0 = GetTemplate | |
mov loc3=out0;; // loc3 = instruction template | |
mov out0=loc5 // out0 = runtime address of bundle | |
mov out1=loc2;; // out1 = instruction slot number | |
br.call.sptk.few b0 = GetSlot | |
mov loc4=out0;; // loc4 = instruction encoding | |
mov out0=loc4 // out0 = instuction encoding | |
mov out1=loc2 // out1 = instruction slot number | |
mov out2=loc3;; // out2 = instruction template | |
br.call.sptk.few b0 = IsSlotBranch | |
cmp.eq p14, p15 = 1, out0;; // Check if branch slot | |
(p15) add loc2=1,loc2 // Increment slot | |
(p15) br.sptk.few RelocateBundleNextSlot | |
mov out0=loc4 // out0 = instuction encoding | |
mov out1=in1 // out1 = IP address of previous location | |
mov out2=in2;; // out2 = IP address of new location | |
br.call.sptk.few b0 = RelocateSlot | |
cmp.eq p14, p15 = 1, out1;; // Check if relocated slot | |
(p15) mov in0=0 // in0 = failure | |
(p15) br.sptk.few RelocateBundleDone | |
mov out2=out0;; // out2 = instruction encoding | |
mov out0=loc5 // out0 = runtime address of bundle | |
mov out1=loc2;; // out1 = instruction slot number | |
br.call.sptk.few b0 = SetSlot | |
add loc2=1,loc2;; // Increment slot | |
br.sptk.few RelocateBundleNextSlot | |
RelocateBundleDone: | |
NESTED_RETURN | |
.endp RelocateBundle | |
///////////////////////////////////////////// | |
// | |
// Name: | |
// RelocateSlot | |
// | |
// Description: | |
// Relocates an instruction bundle by updating any ip-relative branch instructions. | |
// | |
// Arguments: | |
// in0 - Instruction encoding (41-bits, right justified) | |
// in1 - IP address of previous location of bundle | |
// in2 - IP address of new location of bundle | |
// | |
// Returns: | |
// in0 - Instruction encoding (41-bits, right justified) | |
// in1 - 1 if successful otherwise 0 | |
// | |
// Notes: | |
// This procedure is a leaf routine | |
// | |
.proc RelocateSlot | |
RelocateSlot: | |
NESTED_SETUP(3,2+5,0,0) | |
extr.u loc2=in0, 37, 4;; // loc2 = instruction opcode | |
cmp.eq p14, p15 = 4, loc2;; // IP-relative branch (B1) or | |
// IP-relative counted branch (B2) | |
(p15) cmp.eq p14, p15 = 5, loc2;; // IP-relative call (B3) | |
(p15) cmp.eq p14, p15 = 7, loc2;; // IP-relative predict (B6) | |
(p15) mov in1=1 // Instruction did not need to be reencoded | |
(p15) br.sptk.few RelocateSlotDone | |
tbit.nz p14, p15 = in0, 36;; // put relative offset sign bit in p14 | |
extr.u loc2=in0, 13, 20;; // loc2 = relative offset in instruction | |
(p14) movl loc3=0xfffffffffff00000;; // extend sign | |
(p14) or loc2=loc2, loc3;; | |
shl loc2=loc2,4;; // convert to byte offset instead of bundle offset | |
add loc3=loc2, in1;; // loc3 = physical address of branch target | |
(p14) sub loc2=r0,loc2;; // flip sign in loc2 if offset is negative | |
sub loc4=loc3,in2;; // loc4 = relative offset from new ip to branch target | |
cmp.lt p15, p14 = 0, loc4;; // get new sign bit | |
(p14) sub loc5=r0,loc4 // get absolute value of offset | |
(p15) mov loc5=loc4;; | |
movl loc6=0x0FFFFFF;; // maximum offset in bytes for ip-rel branch | |
cmp.gt p14, p15 = loc5, loc6;; // check to see we're not out of range for an ip-relative branch | |
(p14) br.sptk.few RelocateSlotError | |
cmp.lt p15, p14 = 0, loc4;; // store sign in p14 again | |
(p14) dep in0=-1,in0,36,1 // store sign bit in instruction | |
(p15) dep in0=0,in0,36,1 | |
shr loc4=loc4, 4;; // convert back to bundle offset | |
dep in0=loc4,in0,13,16;; // put first 16 bits of new offset into instruction | |
shr loc4=loc4,16;; | |
dep in0=loc4,in0,13+16,4 // put last 4 bits of new offset into instruction | |
mov in1=1;; // in1 = success | |
br.sptk.few RelocateSlotDone;; | |
RelocateSlotError: | |
mov in1=0;; // in1 = failure | |
RelocateSlotDone: | |
NESTED_RETURN | |
.endp RelocateSlot | |
///////////////////////////////////////////// | |
// | |
// Name: | |
// IsSlotBranch | |
// | |
// Description: | |
// Determines if the given instruction is a branch instruction. | |
// | |
// Arguments: | |
// in0 - Instruction encoding (41-bits, right justified) | |
// in1 - Instruction slot number | |
// in2 - Bundle template | |
// | |
// Returns: | |
// in0 - 1 if branch or 0 if not branch | |
// | |
// Notes: | |
// This procedure is a leaf routine | |
// | |
// IsSlotBranch recognizes all branch instructions by looking at the provided template. | |
// The instruction encoding is only passed to this routine for future expansion. | |
// | |
.proc IsSlotBranch | |
IsSlotBranch: | |
NESTED_SETUP (3,2+0,0,0) | |
mov in0=1;; // in0 = 1 which destroys the instruction | |
andcm in2=in2,in0;; // in2 = even template to reduce compares | |
mov in0=0;; // in0 = not a branch | |
cmp.eq p14, p15 = 0x16, in2;; // Template 0x16 is BBB | |
(p14) br.sptk.few IsSlotBranchTrue | |
cmp.eq p14, p15 = SLOT0, in1;; // Slot 0 has no other possiblities | |
(p14) br.sptk.few IsSlotBranchDone | |
cmp.eq p14, p15 = 0x12, in2;; // Template 0x12 is MBB | |
(p14) br.sptk.few IsSlotBranchTrue | |
cmp.eq p14, p15 = SLOT1, in1;; // Slot 1 has no other possiblities | |
(p14) br.sptk.few IsSlotBranchDone | |
cmp.eq p14, p15 = 0x10, in2;; // Template 0x10 is MIB | |
(p14) br.sptk.few IsSlotBranchTrue | |
cmp.eq p14, p15 = 0x18, in2;; // Template 0x18 is MMB | |
(p14) br.sptk.few IsSlotBranchTrue | |
cmp.eq p14, p15 = 0x1C, in2;; // Template 0x1C is MFB | |
(p14) br.sptk.few IsSlotBranchTrue | |
br.sptk.few IsSlotBranchDone | |
IsSlotBranchTrue: | |
mov in0=1;; // in0 = branch | |
IsSlotBranchDone: | |
NESTED_RETURN | |
.endp IsSlotBranch | |
///////////////////////////////////////////// | |
// | |
// Name: | |
// GetTemplate | |
// | |
// Description: | |
// Retrieves the instruction template for an instruction bundle | |
// | |
// Arguments: | |
// in0 - Runtime address of bundle | |
// | |
// Returns: | |
// in0 - Instruction template (5-bits, right-justified) | |
// | |
// Notes: | |
// This procedure is a leaf routine | |
// | |
.proc GetTemplate | |
GetTemplate: | |
NESTED_SETUP (1,2+2,0,0) | |
ld8 loc2=[in0], 0x8 // loc2 = first 8 bytes of branch bundle | |
movl loc3=MASK_0_4;; // loc3 = template mask | |
and loc2=loc2,loc3;; // loc2 = template, right justified | |
mov in0=loc2;; // in0 = template, right justified | |
NESTED_RETURN | |
.endp GetTemplate | |
///////////////////////////////////////////// | |
// | |
// Name: | |
// GetSlot | |
// | |
// Description: | |
// Gets the instruction encoding for an instruction slot and bundle | |
// | |
// Arguments: | |
// in0 - Runtime address of bundle | |
// in1 - Instruction slot (either 0, 1, or 2) | |
// | |
// Returns: | |
// in0 - Instruction encoding (41-bits, right justified) | |
// | |
// Notes: | |
// This procedure is a leaf routine | |
// | |
// Slot0 - [in0 + 0x8] Bits 45-5 | |
// Slot1 - [in0 + 0x8] Bits 63-46 and [in0] Bits 22-0 | |
// Slot2 - [in0] Bits 63-23 | |
// | |
.proc GetSlot | |
GetSlot: | |
NESTED_SETUP (2,2+3,0,0) | |
ld8 loc2=[in0], 0x8;; // loc2 = first 8 bytes of branch bundle | |
ld8 loc3=[in0];; // loc3 = second 8 bytes of branch bundle | |
cmp.eq p14, p15 = 2, in1;; // check if slot 2 specified | |
(p14) br.cond.sptk.few GetSlot2;; // get slot 2 | |
cmp.eq p14, p15 = 1, in1;; // check if slot 1 specified | |
(p14) br.cond.sptk.few GetSlot1;; // get slot 1 | |
GetSlot0: | |
extr.u in0=loc2, 5, 45 // in0 = extracted slot 0 | |
br.sptk.few GetSlotDone;; | |
GetSlot1: | |
extr.u in0=loc2, 46, 18 // in0 = bits 63-46 of loc2 right-justified | |
extr.u loc4=loc3, 0, 23;; // loc4 = bits 22-0 of loc3 right-justified | |
dep in0=loc4, in0, 18, 15;; | |
shr.u loc4=loc4,15;; | |
dep in0=loc4, in0, 33, 8;; // in0 = extracted slot 1 | |
br.sptk.few GetSlotDone;; | |
GetSlot2: | |
extr.u in0=loc3, 23, 41;; // in0 = extracted slot 2 | |
GetSlotDone: | |
NESTED_RETURN | |
.endp GetSlot | |
///////////////////////////////////////////// | |
// | |
// Name: | |
// SetSlot | |
// | |
// Description: | |
// Sets the instruction encoding for an instruction slot and bundle | |
// | |
// Arguments: | |
// in0 - Runtime address of bundle | |
// in1 - Instruction slot (either 0, 1, or 2) | |
// in2 - Instruction encoding (41-bits, right justified) | |
// | |
// Returns: | |
// | |
// Notes: | |
// This procedure is a leaf routine | |
// | |
.proc SetSlot | |
SetSlot: | |
NESTED_SETUP (3,2+3,0,0) | |
ld8 loc2=[in0], 0x8;; // loc2 = first 8 bytes of bundle | |
ld8 loc3=[in0];; // loc3 = second 8 bytes of bundle | |
cmp.eq p14, p15 = 2, in1;; // check if slot 2 specified | |
(p14) br.cond.sptk.few SetSlot2;; // set slot 2 | |
cmp.eq p14, p15 = 1, in1;; // check if slot 1 specified | |
(p14) br.cond.sptk.few SetSlot1;; // set slot 1 | |
SetSlot0: | |
dep loc2=0, loc2, 5, 41;; // remove old instruction from slot 0 | |
shl loc4=in2, 5;; // loc4 = new instruction ready to be inserted | |
or loc2=loc2, loc4;; // loc2 = updated first 8 bytes of bundle | |
add loc4=0x8,in0;; // loc4 = address to store first 8 bytes of bundle | |
st8 [loc4]=loc2 // [loc4] = updated bundle | |
br.sptk.few SetSlotDone;; | |
;; | |
SetSlot1: | |
dep loc2=0, loc2, 46, 18 // remove old instruction from slot 1 | |
dep loc3=0, loc3, 0, 23;; | |
shl loc4=in2, 46;; // loc4 = partial instruction ready to be inserted | |
or loc2=loc2, loc4;; // loc2 = updated first 8 bytes of bundle | |
add loc4=0x8,in0;; // loc4 = address to store first 8 bytes of bundle | |
st8 [loc4]=loc2;; // [loc4] = updated bundle | |
shr.u loc4=in2, 18;; // loc4 = partial instruction ready to be inserted | |
or loc3=loc3, loc4;; // loc3 = updated second 8 bytes of bundle | |
st8 [in0]=loc3;; // [in0] = updated bundle | |
br.sptk.few SetSlotDone;; | |
SetSlot2: | |
dep loc3=0, loc3, 23, 41;; // remove old instruction from slot 2 | |
shl loc4=in2, 23;; // loc4 = instruction ready to be inserted | |
or loc3=loc3, loc4;; // loc3 = updated second 8 bytes of bundle | |
st8 [in0]=loc3;; // [in0] = updated bundle | |
SetSlotDone: | |
NESTED_RETURN | |
.endp SetSlot | |
///////////////////////////////////////////// | |
// | |
// Name: | |
// GetIva | |
// | |
// Description: | |
// C callable function to obtain the current value of IVA | |
// | |
// Returns: | |
// Current value if IVA | |
ASM_GLOBAL GetIva | |
.proc GetIva | |
GetIva: | |
mov r8=cr2;; | |
br.ret.sptk.many b0 | |
.endp GetIva | |
///////////////////////////////////////////// | |
// | |
// Name: | |
// ProgramInterruptFlags | |
// | |
// Description: | |
// C callable function to enable/disable interrupts | |
// | |
// Returns: | |
// Previous state of psr.ic | |
// | |
ASM_GLOBAL ProgramInterruptFlags | |
.proc ProgramInterruptFlags | |
ProgramInterruptFlags: | |
alloc loc0=1,2,0,0;; | |
mov loc0=psr | |
mov loc1=0x6000;; | |
and r8=loc0, loc1 // obtain current psr.ic and psr.i state | |
and in0=in0, loc1 // insure no extra bits set in input | |
andcm loc0=loc0,loc1;; // clear original psr.i and psr.ic | |
or loc0=loc0,in0;; // OR in new psr.ic value | |
mov psr.l=loc0;; // write new psr | |
srlz.d | |
br.ret.sptk.many b0 // return | |
.endp ProgramInterruptFlags | |
///////////////////////////////////////////// | |
// | |
// Name: | |
// SpillContext | |
// | |
// Description: | |
// Saves system context to context record. | |
// | |
// Arguments: | |
// in0 = 512 byte aligned context record address | |
// in1 = original B0 | |
// in2 = original ar.bsp | |
// in3 = original ar.bspstore | |
// in4 = original ar.rnat | |
// in5 = original ar.pfs | |
// | |
// Notes: | |
// loc0 - scratch | |
// loc1 - scratch | |
// loc2 - temporary application unat storage | |
// loc3 - temporary exception handler unat storage | |
.proc SpillContext | |
SpillContext: | |
alloc loc0=6,4,0,0;; // alloc 6 input, 4 locals, 0 outs | |
mov loc2=ar.unat;; // save application context unat (spilled later) | |
mov ar.unat=r0;; // set UNAT=0 | |
st8.spill [in0]=r0,8;; | |
st8.spill [in0]=r1,8;; // save R1 - R31 | |
st8.spill [in0]=r2,8;; | |
st8.spill [in0]=r3,8;; | |
st8.spill [in0]=r4,8;; | |
st8.spill [in0]=r5,8;; | |
st8.spill [in0]=r6,8;; | |
st8.spill [in0]=r7,8;; | |
st8.spill [in0]=r8,8;; | |
st8.spill [in0]=r9,8;; | |
st8.spill [in0]=r10,8;; | |
st8.spill [in0]=r11,8;; | |
st8.spill [in0]=r12,8;; | |
st8.spill [in0]=r13,8;; | |
st8.spill [in0]=r14,8;; | |
st8.spill [in0]=r15,8;; | |
st8.spill [in0]=r16,8;; | |
st8.spill [in0]=r17,8;; | |
st8.spill [in0]=r18,8;; | |
st8.spill [in0]=r19,8;; | |
st8.spill [in0]=r20,8;; | |
st8.spill [in0]=r21,8;; | |
st8.spill [in0]=r22,8;; | |
st8.spill [in0]=r23,8;; | |
st8.spill [in0]=r24,8;; | |
st8.spill [in0]=r25,8;; | |
st8.spill [in0]=r26,8;; | |
st8.spill [in0]=r27,8;; | |
st8.spill [in0]=r28,8;; | |
st8.spill [in0]=r29,8;; | |
st8.spill [in0]=r30,8;; | |
st8.spill [in0]=r31,8;; | |
mov loc3=ar.unat;; // save debugger context unat (spilled later) | |
stf.spill [in0]=f2,16;; // save f2 - f31 | |
stf.spill [in0]=f3,16;; | |
stf.spill [in0]=f4,16;; | |
stf.spill [in0]=f5,16;; | |
stf.spill [in0]=f6,16;; | |
stf.spill [in0]=f7,16;; | |
stf.spill [in0]=f8,16;; | |
stf.spill [in0]=f9,16;; | |
stf.spill [in0]=f10,16;; | |
stf.spill [in0]=f11,16;; | |
stf.spill [in0]=f12,16;; | |
stf.spill [in0]=f13,16;; | |
stf.spill [in0]=f14,16;; | |
stf.spill [in0]=f15,16;; | |
stf.spill [in0]=f16,16;; | |
stf.spill [in0]=f17,16;; | |
stf.spill [in0]=f18,16;; | |
stf.spill [in0]=f19,16;; | |
stf.spill [in0]=f20,16;; | |
stf.spill [in0]=f21,16;; | |
stf.spill [in0]=f22,16;; | |
stf.spill [in0]=f23,16;; | |
stf.spill [in0]=f24,16;; | |
stf.spill [in0]=f25,16;; | |
stf.spill [in0]=f26,16;; | |
stf.spill [in0]=f27,16;; | |
stf.spill [in0]=f28,16;; | |
stf.spill [in0]=f29,16;; | |
stf.spill [in0]=f30,16;; | |
stf.spill [in0]=f31,16;; | |
mov loc0=pr;; // save predicates | |
st8.spill [in0]=loc0,8;; | |
st8.spill [in0]=in1,8;; // save b0 - b7... in1 already equals saved b0 | |
mov loc0=b1;; | |
st8.spill [in0]=loc0,8;; | |
mov loc0=b2;; | |
st8.spill [in0]=loc0,8;; | |
mov loc0=b3;; | |
st8.spill [in0]=loc0,8;; | |
mov loc0=b4;; | |
st8.spill [in0]=loc0,8;; | |
mov loc0=b5;; | |
st8.spill [in0]=loc0,8;; | |
mov loc0=b6;; | |
st8.spill [in0]=loc0,8;; | |
mov loc0=b7;; | |
st8.spill [in0]=loc0,8;; | |
mov loc0=ar.rsc;; // save ar.rsc | |
st8.spill [in0]=loc0,8;; | |
st8.spill [in0]=in2,8;; // save ar.bsp (in2) | |
st8.spill [in0]=in3,8;; // save ar.bspstore (in3) | |
st8.spill [in0]=in4,8;; // save ar.rnat (in4) | |
mov loc0=ar.fcr;; // save ar.fcr (ar21 - IA32 floating-point control register) | |
st8.spill [in0]=loc0,8;; | |
mov loc0=ar.eflag;; // save ar.eflag (ar24) | |
st8.spill [in0]=loc0,8;; | |
mov loc0=ar.csd;; // save ar.csd (ar25 - ia32 CS descriptor) | |
st8.spill [in0]=loc0,8;; | |
mov loc0=ar.ssd;; // save ar.ssd (ar26 - ia32 ss descriptor) | |
st8.spill [in0]=loc0,8;; | |
mov loc0=ar.cflg;; // save ar.cflg (ar27 - ia32 cr0 and cr4) | |
st8.spill [in0]=loc0,8;; | |
mov loc0=ar.fsr;; // save ar.fsr (ar28 - ia32 floating-point status register) | |
st8.spill [in0]=loc0,8;; | |
mov loc0=ar.fir;; // save ar.fir (ar29 - ia32 floating-point instruction register) | |
st8.spill [in0]=loc0,8;; | |
mov loc0=ar.fdr;; // save ar.fdr (ar30 - ia32 floating-point data register) | |
st8.spill [in0]=loc0,8;; | |
mov loc0=ar.ccv;; // save ar.ccv | |
st8.spill [in0]=loc0,8;; | |
st8.spill [in0]=loc2,8;; // save ar.unat (saved to loc2 earlier) | |
mov loc0=ar.fpsr;; // save floating point status register | |
st8.spill [in0]=loc0,8;; | |
st8.spill [in0]=in5,8;; // save ar.pfs | |
mov loc0=ar.lc;; // save ar.lc | |
st8.spill [in0]=loc0,8;; | |
mov loc0=ar.ec;; // save ar.ec | |
st8.spill [in0]=loc0,8;; | |
// save control registers | |
mov loc0=cr.dcr;; // save dcr | |
st8.spill [in0]=loc0,8;; | |
mov loc0=cr.itm;; // save itm | |
st8.spill [in0]=loc0,8;; | |
mov loc0=cr.iva;; // save iva | |
st8.spill [in0]=loc0,8;; | |
mov loc0=cr.pta;; // save pta | |
st8.spill [in0]=loc0,8;; | |
mov loc0=cr.ipsr;; // save ipsr | |
st8.spill [in0]=loc0,8;; | |
mov loc0=cr.isr;; // save isr | |
st8.spill [in0]=loc0,8;; | |
mov loc0=cr.iip;; // save iip | |
st8.spill [in0]=loc0,8;; | |
mov loc0=cr.ifa;; // save ifa | |
st8.spill [in0]=loc0,8;; | |
mov loc0=cr.itir;; // save itir | |
st8.spill [in0]=loc0,8;; | |
mov loc0=cr.iipa;; // save iipa | |
st8.spill [in0]=loc0,8;; | |
mov loc0=cr.ifs;; // save ifs | |
st8.spill [in0]=loc0,8;; | |
mov loc0=cr.iim;; // save iim | |
st8.spill [in0]=loc0,8;; | |
mov loc0=cr.iha;; // save iha | |
st8.spill [in0]=loc0,8;; | |
// save debug registers | |
mov loc0=dbr[r0];; // save dbr0 - dbr7 | |
st8.spill [in0]=loc0,8;; | |
movl loc1=1;; | |
mov loc0=dbr[loc1];; | |
st8.spill [in0]=loc0,8;; | |
movl loc1=2;; | |
mov loc0=dbr[loc1];; | |
st8.spill [in0]=loc0,8;; | |
movl loc1=3;; | |
mov loc0=dbr[loc1];; | |
st8.spill [in0]=loc0,8;; | |
movl loc1=4;; | |
mov loc0=dbr[loc1];; | |
st8.spill [in0]=loc0,8;; | |
movl loc1=5;; | |
mov loc0=dbr[loc1];; | |
st8.spill [in0]=loc0,8;; | |
movl loc1=6;; | |
mov loc0=dbr[loc1];; | |
st8.spill [in0]=loc0,8;; | |
movl loc1=7;; | |
mov loc0=dbr[loc1];; | |
st8.spill [in0]=loc0,8;; | |
mov loc0=ibr[r0];; // save ibr0 - ibr7 | |
st8.spill [in0]=loc0,8;; | |
movl loc1=1;; | |
mov loc0=ibr[loc1];; | |
st8.spill [in0]=loc0,8;; | |
movl loc1=2;; | |
mov loc0=ibr[loc1];; | |
st8.spill [in0]=loc0,8;; | |
movl loc1=3;; | |
mov loc0=ibr[loc1];; | |
st8.spill [in0]=loc0,8;; | |
movl loc1=4;; | |
mov loc0=ibr[loc1];; | |
st8.spill [in0]=loc0,8;; | |
movl loc1=5;; | |
mov loc0=ibr[loc1];; | |
st8.spill [in0]=loc0,8;; | |
movl loc1=6;; | |
mov loc0=ibr[loc1];; | |
st8.spill [in0]=loc0,8;; | |
movl loc1=7;; | |
mov loc0=ibr[loc1];; | |
st8.spill [in0]=loc0,8;; | |
st8.spill [in0]=loc3;; | |
br.ret.sptk.few b0 | |
.endp SpillContext | |
///////////////////////////////////////////// | |
// | |
// Name: | |
// FillContext | |
// | |
// Description: | |
// Restores register context from context record. | |
// | |
// Arguments: | |
// in0 = address of last element 512 byte aligned context record address | |
// in1 = modified B0 | |
// in2 = modified ar.bsp | |
// in3 = modified ar.bspstore | |
// in4 = modified ar.rnat | |
// in5 = modified ar.pfs | |
// | |
// Notes: | |
// loc0 - scratch | |
// loc1 - scratch | |
// loc2 - temporary application unat storage | |
// loc3 - temporary exception handler unat storage | |
.proc FillContext | |
FillContext: | |
alloc loc0=6,4,0,0;; // alloc 6 inputs, 4 locals, 0 outs | |
ld8.fill loc3=[in0],-8;; // int_nat (nat bits for R1-31) | |
movl loc1=7;; // ibr7 | |
ld8.fill loc0=[in0],-8;; | |
mov ibr[loc1]=loc0;; | |
movl loc1=6;; // ibr6 | |
ld8.fill loc0=[in0],-8;; | |
mov ibr[loc1]=loc0;; | |
movl loc1=5;; // ibr5 | |
ld8.fill loc0=[in0],-8;; | |
mov ibr[loc1]=loc0;; | |
movl loc1=4;; // ibr4 | |
ld8.fill loc0=[in0],-8;; | |
mov ibr[loc1]=loc0;; | |
movl loc1=3;; // ibr3 | |
ld8.fill loc0=[in0],-8;; | |
mov ibr[loc1]=loc0;; | |
movl loc1=2;; // ibr2 | |
ld8.fill loc0=[in0],-8;; | |
mov ibr[loc1]=loc0;; | |
movl loc1=1;; // ibr1 | |
ld8.fill loc0=[in0],-8;; | |
mov ibr[loc1]=loc0;; | |
ld8.fill loc0=[in0],-8;; // ibr0 | |
mov ibr[r0]=loc0;; | |
movl loc1=7;; // dbr7 | |
ld8.fill loc0=[in0],-8;; | |
mov dbr[loc1]=loc0;; | |
movl loc1=6;; // dbr6 | |
ld8.fill loc0=[in0],-8;; | |
mov dbr[loc1]=loc0;; | |
movl loc1=5;; // dbr5 | |
ld8.fill loc0=[in0],-8;; | |
mov dbr[loc1]=loc0;; | |
movl loc1=4;; // dbr4 | |
ld8.fill loc0=[in0],-8;; | |
mov dbr[loc1]=loc0;; | |
movl loc1=3;; // dbr3 | |
ld8.fill loc0=[in0],-8;; | |
mov dbr[loc1]=loc0;; | |
movl loc1=2;; // dbr2 | |
ld8.fill loc0=[in0],-8;; | |
mov dbr[loc1]=loc0;; | |
movl loc1=1;; // dbr1 | |
ld8.fill loc0=[in0],-8;; | |
mov dbr[loc1]=loc0;; | |
ld8.fill loc0=[in0],-8;; // dbr0 | |
mov dbr[r0]=loc0;; | |
ld8.fill loc0=[in0],-8;; // iha | |
mov cr.iha=loc0;; | |
ld8.fill loc0=[in0],-8;; // iim | |
mov cr.iim=loc0;; | |
ld8.fill loc0=[in0],-8;; // ifs | |
mov cr.ifs=loc0;; | |
ld8.fill loc0=[in0],-8;; // iipa | |
mov cr.iipa=loc0;; | |
ld8.fill loc0=[in0],-8;; // itir | |
mov cr.itir=loc0;; | |
ld8.fill loc0=[in0],-8;; // ifa | |
mov cr.ifa=loc0;; | |
ld8.fill loc0=[in0],-8;; // iip | |
mov cr.iip=loc0;; | |
ld8.fill loc0=[in0],-8;; // isr | |
mov cr.isr=loc0;; | |
ld8.fill loc0=[in0],-8;; // ipsr | |
mov cr.ipsr=loc0;; | |
ld8.fill loc0=[in0],-8;; // pta | |
mov cr.pta=loc0;; | |
ld8.fill loc0=[in0],-8;; // iva | |
mov cr.iva=loc0;; | |
ld8.fill loc0=[in0],-8;; // itm | |
mov cr.itm=loc0;; | |
ld8.fill loc0=[in0],-8;; // dcr | |
mov cr.dcr=loc0;; | |
ld8.fill loc0=[in0],-8;; // ec | |
mov ar.ec=loc0;; | |
ld8.fill loc0=[in0],-8;; // lc | |
mov ar.lc=loc0;; | |
ld8.fill in5=[in0],-8;; // ar.pfs | |
ld8.fill loc0=[in0],-8;; // ar.fpsr | |
mov ar.fpsr=loc0;; | |
ld8.fill loc2=[in0],-8;; // ar.unat - restored later... | |
ld8.fill loc0=[in0],-8;; // ar.ccv | |
mov ar.ccv=loc0;; | |
ld8.fill loc0=[in0],-8;; // ar.fdr | |
mov ar.fdr=loc0;; | |
ld8.fill loc0=[in0],-8;; // ar.fir | |
mov ar.fir=loc0;; | |
ld8.fill loc0=[in0],-8;; // ar.fsr | |
mov ar.fsr=loc0;; | |
ld8.fill loc0=[in0],-8;; // ar.cflg | |
mov ar.cflg=loc0;; | |
ld8.fill loc0=[in0],-8;; // ar.ssd | |
mov ar.ssd=loc0;; | |
ld8.fill loc0=[in0],-8;; // ar.csd | |
mov ar.csd=loc0;; | |
ld8.fill loc0=[in0],-8;; // ar.eflag | |
mov ar.eflag=loc0;; | |
ld8.fill loc0=[in0],-8;; // ar.fcr | |
mov ar.fcr=loc0;; | |
ld8.fill in4=[in0],-8;; // ar.rnat | |
ld8.fill in3=[in0],-8;; // bspstore | |
ld8.fill in2=[in0],-8;; // bsp | |
ld8.fill loc0=[in0],-8;; // ar.rsc | |
mov ar.rsc=loc0;; | |
ld8.fill loc0=[in0],-8;; // B7 - B0 | |
mov b7=loc0;; | |
ld8.fill loc0=[in0],-8;; | |
mov b6=loc0;; | |
ld8.fill loc0=[in0],-8;; | |
mov b5=loc0;; | |
ld8.fill loc0=[in0],-8;; | |
mov b4=loc0;; | |
ld8.fill loc0=[in0],-8;; | |
mov b3=loc0;; | |
ld8.fill loc0=[in0],-8;; | |
mov b2=loc0;; | |
ld8.fill loc0=[in0],-8;; | |
mov b1=loc0;; | |
ld8.fill in1=[in0],-8;; // b0 is temporarily stored in in1 | |
ld8.fill loc0=[in0],-16;; // predicates | |
mov pr=loc0;; | |
ldf.fill f31=[in0],-16;; | |
ldf.fill f30=[in0],-16;; | |
ldf.fill f29=[in0],-16;; | |
ldf.fill f28=[in0],-16;; | |
ldf.fill f27=[in0],-16;; | |
ldf.fill f26=[in0],-16;; | |
ldf.fill f25=[in0],-16;; | |
ldf.fill f24=[in0],-16;; | |
ldf.fill f23=[in0],-16;; | |
ldf.fill f22=[in0],-16;; | |
ldf.fill f21=[in0],-16;; | |
ldf.fill f20=[in0],-16;; | |
ldf.fill f19=[in0],-16;; | |
ldf.fill f18=[in0],-16;; | |
ldf.fill f17=[in0],-16;; | |
ldf.fill f16=[in0],-16;; | |
ldf.fill f15=[in0],-16;; | |
ldf.fill f14=[in0],-16;; | |
ldf.fill f13=[in0],-16;; | |
ldf.fill f12=[in0],-16;; | |
ldf.fill f11=[in0],-16;; | |
ldf.fill f10=[in0],-16;; | |
ldf.fill f9=[in0],-16;; | |
ldf.fill f8=[in0],-16;; | |
ldf.fill f7=[in0],-16;; | |
ldf.fill f6=[in0],-16;; | |
ldf.fill f5=[in0],-16;; | |
ldf.fill f4=[in0],-16;; | |
ldf.fill f3=[in0],-16;; | |
ldf.fill f2=[in0],-8;; | |
mov ar.unat=loc3;; // restore unat (int_nat) before fill of general registers | |
ld8.fill r31=[in0],-8;; | |
ld8.fill r30=[in0],-8;; | |
ld8.fill r29=[in0],-8;; | |
ld8.fill r28=[in0],-8;; | |
ld8.fill r27=[in0],-8;; | |
ld8.fill r26=[in0],-8;; | |
ld8.fill r25=[in0],-8;; | |
ld8.fill r24=[in0],-8;; | |
ld8.fill r23=[in0],-8;; | |
ld8.fill r22=[in0],-8;; | |
ld8.fill r21=[in0],-8;; | |
ld8.fill r20=[in0],-8;; | |
ld8.fill r19=[in0],-8;; | |
ld8.fill r18=[in0],-8;; | |
ld8.fill r17=[in0],-8;; | |
ld8.fill r16=[in0],-8;; | |
ld8.fill r15=[in0],-8;; | |
ld8.fill r14=[in0],-8;; | |
ld8.fill r13=[in0],-8;; | |
ld8.fill r12=[in0],-8;; | |
ld8.fill r11=[in0],-8;; | |
ld8.fill r10=[in0],-8;; | |
ld8.fill r9=[in0],-8;; | |
ld8.fill r8=[in0],-8;; | |
ld8.fill r7=[in0],-8;; | |
ld8.fill r6=[in0],-8;; | |
ld8.fill r5=[in0],-8;; | |
ld8.fill r4=[in0],-8;; | |
ld8.fill r3=[in0],-8;; | |
ld8.fill r2=[in0],-8;; | |
ld8.fill r1=[in0],-8;; | |
mov ar.unat=loc2;; // restore application context unat | |
br.ret.sptk.many b0 | |
.endp FillContext | |
///////////////////////////////////////////// | |
// | |
// Name: | |
// HookHandler | |
// | |
// Description: | |
// Common branch target from hooked IVT entries. Runs in interrupt context. | |
// Responsible for saving and restoring context and calling common C | |
// handler. Banked registers running on bank 0 at entry. | |
// | |
// Arguments: | |
// All arguments are passed in banked registers: | |
// B0_REG = Original B0 | |
// SCRATCH_REG1 = IVT entry index | |
// | |
// Returns: | |
// Returns via rfi | |
// | |
// Notes: | |
// loc0 - scratch | |
// loc1 - scratch | |
// loc2 - vector number / mask | |
// loc3 - 16 byte aligned context record address | |
// loc4 - temporary storage of last address in context record | |
HookHandler: | |
flushrs;; // Synch RSE with backing store | |
mov SCRATCH_REG2=ar.bsp // save interrupted context bsp | |
mov SCRATCH_REG3=ar.bspstore // save interrupted context bspstore | |
mov SCRATCH_REG4=ar.rnat // save interrupted context rnat | |
mov SCRATCH_REG6=cr.ifs;; // save IFS in case we need to chain... | |
cover;; // creates new frame, moves old | |
// CFM to IFS. | |
alloc SCRATCH_REG5=0,5,6,0 // alloc 5 locals, 6 outs | |
;; | |
// save banked registers to locals | |
mov out1=B0_REG // out1 = Original B0 | |
mov out2=SCRATCH_REG2 // out2 = original ar.bsp | |
mov out3=SCRATCH_REG3 // out3 = original ar.bspstore | |
mov out4=SCRATCH_REG4 // out4 = original ar.rnat | |
mov out5=SCRATCH_REG5 // out5 = original ar.pfs | |
mov loc2=SCRATCH_REG1;; // loc2 = vector number + chain flag | |
bsw.1;; // switch banked registers to bank 1 | |
srlz.d // explicit serialize required | |
// now fill in context record structure | |
movl loc3=IpfContextBuf // Insure context record is aligned | |
add loc0=-0x200,r0;; // mask the lower 9 bits (align on 512 byte boundary) | |
and loc3=loc3,loc0;; | |
add loc3=0x200,loc3;; // move to next 512 byte boundary | |
// loc3 now contains the 512 byte aligned context record | |
// spill register context into context record | |
mov out0=loc3;; // Context record base in out0 | |
// original B0 in out1 already | |
// original ar.bsp in out2 already | |
// original ar.bspstore in out3 already | |
br.call.sptk.few b0=SpillContext;; // spill context | |
mov loc4=out0 // save modified address | |
// At this point, the context has been saved to the context record and we're | |
// ready to call the C part of the handler... | |
movl loc0=CommonHandler;; // obtain address of plabel | |
ld8 loc1=[loc0];; // get entry point of CommonHandler | |
mov b6=loc1;; // put it in a branch register | |
adds loc1= 8, loc0;; // index to GP in plabel | |
ld8 r1=[loc1];; // set up gp for C call | |
mov loc1=0xfffff;; // mask off so only vector bits are present | |
and out0=loc2,loc1;; // pass vector number (exception type) | |
mov out1=loc3;; // pass context record address | |
br.call.sptk.few b0=b6;; // call C handler | |
// We've returned from the C call, so restore the context and either rfi | |
// back to interrupted thread, or chain into the SAL if this was an external interrupt | |
mov out0=loc4;; // pass address of last element in context record | |
br.call.sptk.few b0=FillContext;; // Fill context | |
mov b0=out1 // fill in b0 | |
mov ar.rnat=out4 | |
mov ar.pfs=out5 | |
// Loadrs is necessary because the debugger may have changed some values in | |
// the backing store. The processor, however may not be aware that the | |
// stacked registers need to be reloaded from the backing store. Therefore, | |
// we explicitly cause the RSE to refresh the stacked register's contents | |
// from the backing store. | |
mov loc0=ar.rsc // get RSC value | |
mov loc1=ar.rsc // save it so we can restore it | |
movl loc3=0xffffffffc000ffff;; // create mask for clearing RSC.loadrs | |
and loc0=loc0,loc3;; // create value for RSC with RSC.loadrs==0 | |
mov ar.rsc=loc0;; // modify RSC | |
loadrs;; // invalidate register stack | |
mov ar.rsc=loc1;; // restore original RSC | |
bsw.0;; // switch banked registers back to bank 0 | |
srlz.d;; // explicit serialize required | |
mov PR_REG=pr // save predicates - to be restored after chaining decision | |
mov B0_REG=b0 // save b0 - required by chain code | |
mov loc2=EXCPT_EXTERNAL_INTERRUPT;; | |
cmp.eq p7,p0=SCRATCH_REG1,loc2;; // check to see if this is the timer tick | |
(p7) br.cond.dpnt.few DO_CHAIN;; | |
NO_CHAIN: | |
mov pr=PR_REG;; | |
rfi;; // we're outa here. | |
DO_CHAIN: | |
mov pr=PR_REG | |
mov SCRATCH_REG1=cr.iva | |
mov SCRATCH_REG2=PATCH_RETURN_OFFSET;; | |
add SCRATCH_REG1=SCRATCH_REG1, SCRATCH_REG2;; | |
mov b0=SCRATCH_REG1;; | |
br.cond.sptk.few b0;; | |
EndHookHandler: | |
///////////////////////////////////////////// | |
// | |
// Name: | |
// HookStub | |
// | |
// Description: | |
// HookStub will be copied from it's loaded location into the IVT when | |
// an IVT entry is hooked. The IVT entry does an indirect jump via B0 to | |
// HookHandler, which in turn calls into the default C handler, which calls | |
// the user-installed C handler. The calls return and HookHandler executes | |
// an rfi. | |
// | |
// Notes: | |
// Saves B0 to B0_REG | |
// Saves IVT index to SCRATCH_REG1 (immediate value is fixed up when code is copied | |
// to the IVT entry. | |
ASM_GLOBAL HookStub | |
.proc HookStub | |
HookStub: | |
mov B0_REG=b0 | |
movl SCRATCH_REG1=HookHandler;; | |
mov b0=SCRATCH_REG1;; | |
mov SCRATCH_REG1=0;;// immediate value is fixed up during install of handler to be the vector number | |
br.cond.sptk.few b0 | |
.endp HookStub | |
///////////////////////////////////////////// | |
// The following code is moved into IVT entry 14 (offset 3400) which is reserved | |
// in the Itanium architecture. The patch code is located at the end of the | |
// IVT entry. | |
PatchCode: | |
mov SCRATCH_REG0=psr | |
mov SCRATCH_REG6=cr.ipsr | |
mov PR_REG=pr | |
mov B0_REG=b0;; | |
// turn off any virtual translations | |
movl SCRATCH_REG1 = ~( MASK(PSR_DT,1) | MASK(PSR_RT,1));; | |
and SCRATCH_REG1 = SCRATCH_REG0, SCRATCH_REG1;; | |
mov psr.l = SCRATCH_REG1;; | |
srlz.d | |
tbit.z p14, p15 = SCRATCH_REG6, PSR_IS;; // Check to see if we were | |
// interrupted from IA32 | |
// context. If so, bail out | |
// and chain to SAL immediately | |
(p15) br.cond.sptk.few Stub_IVT_Passthru;; | |
// we only want to take 1 out of 32 external interrupts to minimize the | |
// impact to system performance. Check our interrupt count and bail | |
// out if we're not up to 32 | |
movl SCRATCH_REG1=ExternalInterruptCount;; | |
ld8 SCRATCH_REG2=[SCRATCH_REG1];; // ExternalInterruptCount | |
tbit.z p14, p15 = SCRATCH_REG2, 5;; // bit 5 set? | |
(p14) add SCRATCH_REG2=1, SCRATCH_REG2;; // No? Then increment | |
// ExternalInterruptCount | |
// and Chain to SAL | |
// immediately | |
(p14) st8 [SCRATCH_REG1]=SCRATCH_REG2;; | |
(p14) br.cond.sptk.few Stub_IVT_Passthru;; | |
(p15) mov SCRATCH_REG2=0;; // Yes? Then reset | |
// ExternalInterruptCount | |
// and branch to | |
// HookHandler | |
(p15) st8 [SCRATCH_REG1]=SCRATCH_REG2;; | |
mov pr=PR_REG | |
movl SCRATCH_REG1=HookHandler;; // SCRATCH_REG1 = entrypoint of HookHandler | |
mov b0=SCRATCH_REG1;; // b0 = entrypoint of HookHandler | |
mov SCRATCH_REG1=EXCPT_EXTERNAL_INTERRUPT;; | |
br.sptk.few b0;; // branch to HookHandler | |
PatchCodeRet: | |
// fake-up an rfi to get RSE back to being coherent and insure psr has | |
// original contents when interrupt occured, then exit to SAL | |
// at this point: | |
// cr.ifs has been modified by previous "cover" | |
// SCRATCH_REG6 has original cr.ifs | |
mov SCRATCH_REG5=cr.ipsr | |
mov SCRATCH_REG4=cr.iip;; | |
mov cr.ipsr=SCRATCH_REG0 | |
mov SCRATCH_REG1=ip;; | |
add SCRATCH_REG1=0x30, SCRATCH_REG1;; | |
mov cr.iip=SCRATCH_REG1;; | |
rfi;; // rfi to next instruction | |
Stub_RfiTarget: | |
mov cr.ifs=SCRATCH_REG6 | |
mov cr.ipsr=SCRATCH_REG5 | |
mov cr.iip=SCRATCH_REG4;; | |
Stub_IVT_Passthru: | |
mov pr=PR_REG // pr = saved predicate registers | |
mov b0=B0_REG;; // b0 = saved b0 | |
EndPatchCode: | |
///////////////////////////////////////////// | |
// The following bundle is moved into IVT entry 14 (offset 0x3400) which is reserved | |
// in the Itanium architecture. This bundle will be the last bundle and will | |
// be located at offset 0x37F0 in the IVT. | |
FailsafeBranch: | |
{ | |
.mib | |
nop.m 0 | |
nop.i 0 | |
br.sptk.few -(FAILSAFE_BRANCH_OFFSET - EXT_INT_ENTRY_OFFSET - 0x10) | |
} | |
///////////////////////////////////////////// | |
// The following bundle is moved into IVT entry 13 (offset 0x3000) which is the | |
// external interrupt. It branches to the patch code. | |
PatchCodeNewBun0: | |
{ | |
.mib | |
nop.m 0 | |
nop.i 0 | |
br.cond.sptk.few PATCH_BRANCH | |
} |