/*++ | |
Copyright (c) 2006, Intel Corporation | |
All rights reserved. This program and the accompanying materials | |
are licensed and made available under the terms and conditions of the BSD License | |
which accompanies this distribution. The full text of the license may be found at | |
http://opensource.org/licenses/bsd-license.php | |
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
Module Name: | |
PciIo.c | |
Abstract: | |
PCI I/O Abstraction Driver | |
Revision History | |
--*/ | |
#include "Pcibus.h" | |
// | |
// Internal use only | |
// | |
STATIC | |
EFI_STATUS | |
ReportErrorStatusCode ( | |
IN PCI_IO_DEVICE *PciIoDevice, | |
IN EFI_STATUS_CODE_VALUE Code | |
); | |
// | |
// PCI I/O Support Function Prototypes | |
// | |
// | |
// | |
// Pci Io Protocol Interface | |
// | |
static EFI_PCI_IO_PROTOCOL PciIoInterface = { | |
PciIoPollMem, | |
PciIoPollIo, | |
{ | |
PciIoMemRead, | |
PciIoMemWrite | |
}, | |
{ | |
PciIoIoRead, | |
PciIoIoWrite | |
}, | |
{ | |
PciIoConfigRead, | |
PciIoConfigWrite | |
}, | |
PciIoCopyMem, | |
PciIoMap, | |
PciIoUnmap, | |
PciIoAllocateBuffer, | |
PciIoFreeBuffer, | |
PciIoFlush, | |
PciIoGetLocation, | |
PciIoAttributes, | |
PciIoGetBarAttributes, | |
PciIoSetBarAttributes, | |
0, | |
NULL | |
}; | |
STATIC | |
EFI_STATUS | |
ReportErrorStatusCode ( | |
IN PCI_IO_DEVICE *PciIoDevice, | |
IN EFI_STATUS_CODE_VALUE Code | |
) | |
/*++ | |
Routine Description: | |
report a error Status code of PCI bus driver controller | |
Arguments: | |
Returns: | |
None | |
--*/ | |
// TODO: PciIoDevice - add argument and description to function comment | |
// TODO: Code - add argument and description to function comment | |
{ | |
return REPORT_STATUS_CODE_WITH_DEVICE_PATH ( | |
EFI_ERROR_CODE | EFI_ERROR_MINOR, | |
Code, | |
PciIoDevice->DevicePath | |
); | |
} | |
EFI_STATUS | |
InitializePciIoInstance ( | |
PCI_IO_DEVICE *PciIoDevice | |
) | |
/*++ | |
Routine Description: | |
Initializes a PCI I/O Instance | |
Arguments: | |
Returns: | |
None | |
--*/ | |
// TODO: PciIoDevice - add argument and description to function comment | |
// TODO: EFI_SUCCESS - add return value to function comment | |
{ | |
CopyMem (&PciIoDevice->PciIo, &PciIoInterface, sizeof (EFI_PCI_IO_PROTOCOL)); | |
return EFI_SUCCESS; | |
} | |
EFI_STATUS | |
PciIoVerifyBarAccess ( | |
PCI_IO_DEVICE *PciIoDevice, | |
UINT8 BarIndex, | |
PCI_BAR_TYPE Type, | |
IN EFI_PCI_IO_PROTOCOL_WIDTH Width, | |
IN UINTN Count, | |
UINT64 *Offset | |
) | |
/*++ | |
Routine Description: | |
Verifies access to a PCI Base Address Register (BAR) | |
Arguments: | |
Returns: | |
None | |
--*/ | |
// TODO: PciIoDevice - add argument and description to function comment | |
// TODO: BarIndex - add argument and description to function comment | |
// TODO: Type - add argument and description to function comment | |
// TODO: Width - add argument and description to function comment | |
// TODO: Count - add argument and description to function comment | |
// TODO: Offset - add argument and description to function comment | |
// TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
// TODO: EFI_SUCCESS - add return value to function comment | |
// TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
// TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
// TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
// TODO: EFI_SUCCESS - add return value to function comment | |
{ | |
if (Width < 0 || Width >= EfiPciIoWidthMaximum) { | |
return EFI_INVALID_PARAMETER; | |
} | |
if (BarIndex == EFI_PCI_IO_PASS_THROUGH_BAR) { | |
return EFI_SUCCESS; | |
} | |
// | |
// BarIndex 0-5 is legal | |
// | |
if (BarIndex >= PCI_MAX_BAR) { | |
return EFI_INVALID_PARAMETER; | |
} | |
if (!CheckBarType (PciIoDevice, BarIndex, Type)) { | |
return EFI_INVALID_PARAMETER; | |
} | |
// | |
// If Width is EfiPciIoWidthFifoUintX then convert to EfiPciIoWidthUintX | |
// If Width is EfiPciIoWidthFillUintX then convert to EfiPciIoWidthUintX | |
// | |
if (Width >= EfiPciWidthFifoUint8 && Width <= EfiPciWidthFifoUint64) { | |
Count = 1; | |
} | |
Width &= 0x03; | |
if ((*Offset + Count * (UINTN)(1 << Width)) - 1 >= PciIoDevice->PciBar[BarIndex].Length) { | |
return EFI_INVALID_PARAMETER; | |
} | |
*Offset = *Offset + PciIoDevice->PciBar[BarIndex].BaseAddress; | |
return EFI_SUCCESS; | |
} | |
EFI_STATUS | |
PciIoVerifyConfigAccess ( | |
PCI_IO_DEVICE *PciIoDevice, | |
IN EFI_PCI_IO_PROTOCOL_WIDTH Width, | |
IN UINTN Count, | |
IN UINT64 *Offset | |
) | |
/*++ | |
Routine Description: | |
Verifies access to a PCI Config Header | |
Arguments: | |
Returns: | |
None | |
--*/ | |
// TODO: PciIoDevice - add argument and description to function comment | |
// TODO: Width - add argument and description to function comment | |
// TODO: Count - add argument and description to function comment | |
// TODO: Offset - add argument and description to function comment | |
// TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
// TODO: EFI_UNSUPPORTED - add return value to function comment | |
// TODO: EFI_UNSUPPORTED - add return value to function comment | |
// TODO: EFI_SUCCESS - add return value to function comment | |
{ | |
UINT64 ExtendOffset; | |
if (Width < 0 || Width >= EfiPciIoWidthMaximum) { | |
return EFI_INVALID_PARAMETER; | |
} | |
// | |
// If Width is EfiPciIoWidthFillUintX then convert to EfiPciIoWidthUintX | |
// | |
Width &= 0x03; | |
if (PciIoDevice->IsPciExp) { | |
if ((*Offset + Count * (UINTN)(1 << Width)) - 1 >= PCI_EXP_MAX_CONFIG_OFFSET) { | |
return EFI_UNSUPPORTED; | |
} | |
ExtendOffset = LShiftU64 (*Offset, 32); | |
*Offset = EFI_PCI_ADDRESS (PciIoDevice->BusNumber, PciIoDevice->DeviceNumber, PciIoDevice->FunctionNumber, 0); | |
*Offset = (*Offset) | ExtendOffset; | |
} else { | |
if ((*Offset + Count * (UINTN)(1 << Width)) - 1 >= PCI_MAX_CONFIG_OFFSET) { | |
return EFI_UNSUPPORTED; | |
} | |
*Offset = EFI_PCI_ADDRESS (PciIoDevice->BusNumber, PciIoDevice->DeviceNumber, PciIoDevice->FunctionNumber, *Offset); | |
} | |
return EFI_SUCCESS; | |
} | |
EFI_STATUS | |
EFIAPI | |
PciIoPollMem ( | |
IN EFI_PCI_IO_PROTOCOL *This, | |
IN EFI_PCI_IO_PROTOCOL_WIDTH Width, | |
IN UINT8 BarIndex, | |
IN UINT64 Offset, | |
IN UINT64 Mask, | |
IN UINT64 Value, | |
IN UINT64 Delay, | |
OUT UINT64 *Result | |
) | |
/*++ | |
Routine Description: | |
Poll PCI Memmory | |
Arguments: | |
Returns: | |
None | |
--*/ | |
// TODO: This - add argument and description to function comment | |
// TODO: Width - add argument and description to function comment | |
// TODO: BarIndex - add argument and description to function comment | |
// TODO: Offset - add argument and description to function comment | |
// TODO: Mask - add argument and description to function comment | |
// TODO: Value - add argument and description to function comment | |
// TODO: Delay - add argument and description to function comment | |
// TODO: Result - add argument and description to function comment | |
// TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
// TODO: EFI_UNSUPPORTED - add return value to function comment | |
// TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
{ | |
EFI_STATUS Status; | |
PCI_IO_DEVICE *PciIoDevice; | |
PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This); | |
if (Width < 0 || Width >= EfiPciIoWidthMaximum) { | |
return EFI_INVALID_PARAMETER; | |
} | |
Status = PciIoVerifyBarAccess (PciIoDevice, BarIndex, PciBarTypeMem, Width, 1, &Offset); | |
if (EFI_ERROR (Status)) { | |
return EFI_UNSUPPORTED; | |
} | |
if (Width > EfiPciIoWidthUint64) { | |
return EFI_INVALID_PARAMETER; | |
} | |
Status = PciIoDevice->PciRootBridgeIo->PollMem ( | |
PciIoDevice->PciRootBridgeIo, | |
(EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) Width, | |
Offset, | |
Mask, | |
Value, | |
Delay, | |
Result | |
); | |
if (EFI_ERROR (Status)) { | |
ReportErrorStatusCode (PciIoDevice, EFI_IO_BUS_PCI | EFI_IOB_EC_CONTROLLER_ERROR); | |
} | |
return Status; | |
} | |
EFI_STATUS | |
EFIAPI | |
PciIoPollIo ( | |
IN EFI_PCI_IO_PROTOCOL *This, | |
IN EFI_PCI_IO_PROTOCOL_WIDTH Width, | |
IN UINT8 BarIndex, | |
IN UINT64 Offset, | |
IN UINT64 Mask, | |
IN UINT64 Value, | |
IN UINT64 Delay, | |
OUT UINT64 *Result | |
) | |
/*++ | |
Routine Description: | |
Poll PCI IO | |
Arguments: | |
Returns: | |
None | |
--*/ | |
// TODO: This - add argument and description to function comment | |
// TODO: Width - add argument and description to function comment | |
// TODO: BarIndex - add argument and description to function comment | |
// TODO: Offset - add argument and description to function comment | |
// TODO: Mask - add argument and description to function comment | |
// TODO: Value - add argument and description to function comment | |
// TODO: Delay - add argument and description to function comment | |
// TODO: Result - add argument and description to function comment | |
// TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
// TODO: EFI_UNSUPPORTED - add return value to function comment | |
// TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
{ | |
EFI_STATUS Status; | |
PCI_IO_DEVICE *PciIoDevice; | |
PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This); | |
if (Width < 0 || Width >= EfiPciIoWidthMaximum) { | |
return EFI_INVALID_PARAMETER; | |
} | |
Status = PciIoVerifyBarAccess (PciIoDevice, BarIndex, PciBarTypeIo, Width, 1, &Offset); | |
if (EFI_ERROR (Status)) { | |
return EFI_UNSUPPORTED; | |
} | |
if (Width > EfiPciIoWidthUint64) { | |
return EFI_INVALID_PARAMETER; | |
} | |
Status = PciIoDevice->PciRootBridgeIo->PollIo ( | |
PciIoDevice->PciRootBridgeIo, | |
(EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) Width, | |
Offset, | |
Mask, | |
Value, | |
Delay, | |
Result | |
); | |
if (EFI_ERROR (Status)) { | |
ReportErrorStatusCode (PciIoDevice, EFI_IO_BUS_PCI | EFI_IOB_EC_CONTROLLER_ERROR); | |
} | |
return Status; | |
} | |
EFI_STATUS | |
EFIAPI | |
PciIoMemRead ( | |
IN EFI_PCI_IO_PROTOCOL *This, | |
IN EFI_PCI_IO_PROTOCOL_WIDTH Width, | |
IN UINT8 BarIndex, | |
IN UINT64 Offset, | |
IN UINTN Count, | |
IN OUT VOID *Buffer | |
) | |
/*++ | |
Routine Description: | |
Performs a PCI Memory Read Cycle | |
Arguments: | |
Returns: | |
None | |
--*/ | |
// TODO: This - add argument and description to function comment | |
// TODO: Width - add argument and description to function comment | |
// TODO: BarIndex - add argument and description to function comment | |
// TODO: Offset - add argument and description to function comment | |
// TODO: Count - add argument and description to function comment | |
// TODO: Buffer - add argument and description to function comment | |
// TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
// TODO: EFI_UNSUPPORTED - add return value to function comment | |
{ | |
EFI_STATUS Status; | |
PCI_IO_DEVICE *PciIoDevice; | |
PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This); | |
if (Width < 0 || Width >= EfiPciIoWidthMaximum) { | |
return EFI_INVALID_PARAMETER; | |
} | |
Status = PciIoVerifyBarAccess (PciIoDevice, BarIndex, PciBarTypeMem, Width, Count, &Offset); | |
if (EFI_ERROR (Status)) { | |
return EFI_UNSUPPORTED; | |
} | |
Status = PciIoDevice->PciRootBridgeIo->Mem.Read ( | |
PciIoDevice->PciRootBridgeIo, | |
(EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) Width, | |
Offset, | |
Count, | |
Buffer | |
); | |
if (EFI_ERROR (Status)) { | |
ReportErrorStatusCode (PciIoDevice, EFI_IO_BUS_PCI | EFI_IOB_EC_READ_ERROR); | |
} | |
return Status; | |
} | |
EFI_STATUS | |
EFIAPI | |
PciIoMemWrite ( | |
IN EFI_PCI_IO_PROTOCOL *This, | |
IN EFI_PCI_IO_PROTOCOL_WIDTH Width, | |
IN UINT8 BarIndex, | |
IN UINT64 Offset, | |
IN UINTN Count, | |
IN OUT VOID *Buffer | |
) | |
/*++ | |
Routine Description: | |
Performs a PCI Memory Write Cycle | |
Arguments: | |
Returns: | |
None | |
--*/ | |
// TODO: This - add argument and description to function comment | |
// TODO: Width - add argument and description to function comment | |
// TODO: BarIndex - add argument and description to function comment | |
// TODO: Offset - add argument and description to function comment | |
// TODO: Count - add argument and description to function comment | |
// TODO: Buffer - add argument and description to function comment | |
// TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
// TODO: EFI_UNSUPPORTED - add return value to function comment | |
{ | |
EFI_STATUS Status; | |
PCI_IO_DEVICE *PciIoDevice; | |
PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This); | |
if (Width < 0 || Width >= EfiPciIoWidthMaximum) { | |
return EFI_INVALID_PARAMETER; | |
} | |
Status = PciIoVerifyBarAccess (PciIoDevice, BarIndex, PciBarTypeMem, Width, Count, &Offset); | |
if (EFI_ERROR (Status)) { | |
return EFI_UNSUPPORTED; | |
} | |
Status = PciIoDevice->PciRootBridgeIo->Mem.Write ( | |
PciIoDevice->PciRootBridgeIo, | |
(EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) Width, | |
Offset, | |
Count, | |
Buffer | |
); | |
if (EFI_ERROR (Status)) { | |
ReportErrorStatusCode (PciIoDevice, EFI_IO_BUS_PCI | EFI_IOB_EC_WRITE_ERROR); | |
} | |
return Status; | |
} | |
EFI_STATUS | |
EFIAPI | |
PciIoIoRead ( | |
IN EFI_PCI_IO_PROTOCOL *This, | |
IN EFI_PCI_IO_PROTOCOL_WIDTH Width, | |
IN UINT8 BarIndex, | |
IN UINT64 Offset, | |
IN UINTN Count, | |
IN OUT VOID *Buffer | |
) | |
/*++ | |
Routine Description: | |
Performs a PCI I/O Read Cycle | |
Arguments: | |
Returns: | |
None | |
--*/ | |
// TODO: This - add argument and description to function comment | |
// TODO: Width - add argument and description to function comment | |
// TODO: BarIndex - add argument and description to function comment | |
// TODO: Offset - add argument and description to function comment | |
// TODO: Count - add argument and description to function comment | |
// TODO: Buffer - add argument and description to function comment | |
// TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
// TODO: EFI_UNSUPPORTED - add return value to function comment | |
{ | |
EFI_STATUS Status; | |
PCI_IO_DEVICE *PciIoDevice; | |
PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This); | |
if (Width < 0 || Width >= EfiPciIoWidthMaximum) { | |
return EFI_INVALID_PARAMETER; | |
} | |
Status = PciIoVerifyBarAccess (PciIoDevice, BarIndex, PciBarTypeIo, Width, Count, &Offset); | |
if (EFI_ERROR (Status)) { | |
return EFI_UNSUPPORTED; | |
} | |
Status = PciIoDevice->PciRootBridgeIo->Io.Read ( | |
PciIoDevice->PciRootBridgeIo, | |
(EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) Width, | |
Offset, | |
Count, | |
Buffer | |
); | |
if (EFI_ERROR (Status)) { | |
ReportErrorStatusCode (PciIoDevice, EFI_IO_BUS_PCI | EFI_IOB_EC_READ_ERROR); | |
} | |
return Status; | |
} | |
EFI_STATUS | |
EFIAPI | |
PciIoIoWrite ( | |
IN EFI_PCI_IO_PROTOCOL *This, | |
IN EFI_PCI_IO_PROTOCOL_WIDTH Width, | |
IN UINT8 BarIndex, | |
IN UINT64 Offset, | |
IN UINTN Count, | |
IN OUT VOID *Buffer | |
) | |
/*++ | |
Routine Description: | |
Performs a PCI I/O Write Cycle | |
Arguments: | |
Returns: | |
None | |
--*/ | |
// TODO: This - add argument and description to function comment | |
// TODO: Width - add argument and description to function comment | |
// TODO: BarIndex - add argument and description to function comment | |
// TODO: Offset - add argument and description to function comment | |
// TODO: Count - add argument and description to function comment | |
// TODO: Buffer - add argument and description to function comment | |
// TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
// TODO: EFI_UNSUPPORTED - add return value to function comment | |
{ | |
EFI_STATUS Status; | |
PCI_IO_DEVICE *PciIoDevice; | |
PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This); | |
if (Width < 0 || Width >= EfiPciIoWidthMaximum) { | |
return EFI_INVALID_PARAMETER; | |
} | |
Status = PciIoVerifyBarAccess (PciIoDevice, BarIndex, PciBarTypeIo, Width, Count, &Offset); | |
if (EFI_ERROR (Status)) { | |
return EFI_UNSUPPORTED; | |
} | |
Status = PciIoDevice->PciRootBridgeIo->Io.Write ( | |
PciIoDevice->PciRootBridgeIo, | |
(EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) Width, | |
Offset, | |
Count, | |
Buffer | |
); | |
if (EFI_ERROR (Status)) { | |
ReportErrorStatusCode (PciIoDevice, EFI_IO_BUS_PCI | EFI_IOB_EC_WRITE_ERROR); | |
} | |
return Status; | |
} | |
EFI_STATUS | |
EFIAPI | |
PciIoConfigRead ( | |
IN EFI_PCI_IO_PROTOCOL *This, | |
IN EFI_PCI_IO_PROTOCOL_WIDTH Width, | |
IN UINT32 Offset, | |
IN UINTN Count, | |
IN OUT VOID *Buffer | |
) | |
/*++ | |
Routine Description: | |
Performs a PCI Configuration Read Cycle | |
Arguments: | |
Returns: | |
None | |
--*/ | |
// TODO: This - add argument and description to function comment | |
// TODO: Width - add argument and description to function comment | |
// TODO: Offset - add argument and description to function comment | |
// TODO: Count - add argument and description to function comment | |
// TODO: Buffer - add argument and description to function comment | |
{ | |
EFI_STATUS Status; | |
PCI_IO_DEVICE *PciIoDevice; | |
UINT64 Address; | |
PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This); | |
Address = Offset; | |
Status = PciIoVerifyConfigAccess (PciIoDevice, Width, Count, &Address); | |
if (EFI_ERROR (Status)) { | |
return Status; | |
} | |
Status = PciIoDevice->PciRootBridgeIo->Pci.Read ( | |
PciIoDevice->PciRootBridgeIo, | |
(EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) Width, | |
Address, | |
Count, | |
Buffer | |
); | |
if (EFI_ERROR (Status)) { | |
ReportErrorStatusCode (PciIoDevice, EFI_IO_BUS_PCI | EFI_IOB_EC_READ_ERROR); | |
} | |
return Status; | |
} | |
EFI_STATUS | |
EFIAPI | |
PciIoConfigWrite ( | |
IN EFI_PCI_IO_PROTOCOL *This, | |
IN EFI_PCI_IO_PROTOCOL_WIDTH Width, | |
IN UINT32 Offset, | |
IN UINTN Count, | |
IN OUT VOID *Buffer | |
) | |
/*++ | |
Routine Description: | |
Performs a PCI Configuration Write Cycle | |
Arguments: | |
Returns: | |
None | |
--*/ | |
// TODO: This - add argument and description to function comment | |
// TODO: Width - add argument and description to function comment | |
// TODO: Offset - add argument and description to function comment | |
// TODO: Count - add argument and description to function comment | |
// TODO: Buffer - add argument and description to function comment | |
{ | |
EFI_STATUS Status; | |
PCI_IO_DEVICE *PciIoDevice; | |
UINT64 Address; | |
PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This); | |
Address = Offset; | |
Status = PciIoVerifyConfigAccess (PciIoDevice, Width, Count, &Address); | |
if (EFI_ERROR (Status)) { | |
return Status; | |
} | |
Status = PciIoDevice->PciRootBridgeIo->Pci.Write ( | |
PciIoDevice->PciRootBridgeIo, | |
(EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) Width, | |
Address, | |
Count, | |
Buffer | |
); | |
if (EFI_ERROR (Status)) { | |
ReportErrorStatusCode (PciIoDevice, EFI_IO_BUS_PCI | EFI_IOB_EC_WRITE_ERROR); | |
} | |
return Status; | |
} | |
EFI_STATUS | |
EFIAPI | |
PciIoCopyMem ( | |
IN EFI_PCI_IO_PROTOCOL *This, | |
IN EFI_PCI_IO_PROTOCOL_WIDTH Width, | |
IN UINT8 DestBarIndex, | |
IN UINT64 DestOffset, | |
IN UINT8 SrcBarIndex, | |
IN UINT64 SrcOffset, | |
IN UINTN Count | |
) | |
/*++ | |
Routine Description: | |
Copy PCI Memory | |
Arguments: | |
Returns: | |
None | |
--*/ | |
// TODO: This - add argument and description to function comment | |
// TODO: Width - add argument and description to function comment | |
// TODO: DestBarIndex - add argument and description to function comment | |
// TODO: DestOffset - add argument and description to function comment | |
// TODO: SrcBarIndex - add argument and description to function comment | |
// TODO: SrcOffset - add argument and description to function comment | |
// TODO: Count - add argument and description to function comment | |
// TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
// TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
// TODO: EFI_UNSUPPORTED - add return value to function comment | |
// TODO: EFI_UNSUPPORTED - add return value to function comment | |
{ | |
EFI_STATUS Status; | |
PCI_IO_DEVICE *PciIoDevice; | |
PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This); | |
if (Width < 0 || Width >= EfiPciIoWidthMaximum) { | |
return EFI_INVALID_PARAMETER; | |
} | |
if (Width == EfiPciIoWidthFifoUint8 || | |
Width == EfiPciIoWidthFifoUint16 || | |
Width == EfiPciIoWidthFifoUint32 || | |
Width == EfiPciIoWidthFifoUint64 || | |
Width == EfiPciIoWidthFillUint8 || | |
Width == EfiPciIoWidthFillUint16 || | |
Width == EfiPciIoWidthFillUint32 || | |
Width == EfiPciIoWidthFillUint64) { | |
return EFI_INVALID_PARAMETER; | |
} | |
Status = PciIoVerifyBarAccess (PciIoDevice, DestBarIndex, PciBarTypeMem, Width, Count, &DestOffset); | |
if (EFI_ERROR (Status)) { | |
return EFI_UNSUPPORTED; | |
} | |
Status = PciIoVerifyBarAccess (PciIoDevice, SrcBarIndex, PciBarTypeMem, Width, Count, &SrcOffset); | |
if (EFI_ERROR (Status)) { | |
return EFI_UNSUPPORTED; | |
} | |
Status = PciIoDevice->PciRootBridgeIo->CopyMem ( | |
PciIoDevice->PciRootBridgeIo, | |
(EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) Width, | |
DestOffset, | |
SrcOffset, | |
Count | |
); | |
if (EFI_ERROR (Status)) { | |
ReportErrorStatusCode (PciIoDevice, EFI_IO_BUS_PCI | EFI_IOB_EC_CONTROLLER_ERROR); | |
} | |
return Status; | |
} | |
EFI_STATUS | |
EFIAPI | |
PciIoMap ( | |
IN EFI_PCI_IO_PROTOCOL *This, | |
IN EFI_PCI_IO_PROTOCOL_OPERATION Operation, | |
IN VOID *HostAddress, | |
IN OUT UINTN *NumberOfBytes, | |
OUT EFI_PHYSICAL_ADDRESS *DeviceAddress, | |
OUT VOID **Mapping | |
) | |
/*++ | |
Routine Description: | |
Maps a memory region for DMA | |
Arguments: | |
Returns: | |
None | |
--*/ | |
// TODO: This - add argument and description to function comment | |
// TODO: Operation - add argument and description to function comment | |
// TODO: HostAddress - add argument and description to function comment | |
// TODO: NumberOfBytes - add argument and description to function comment | |
// TODO: DeviceAddress - add argument and description to function comment | |
// TODO: Mapping - add argument and description to function comment | |
// TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
// TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
{ | |
EFI_STATUS Status; | |
PCI_IO_DEVICE *PciIoDevice; | |
PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This); | |
if (Operation < 0 || Operation >= EfiPciIoOperationMaximum) { | |
return EFI_INVALID_PARAMETER; | |
} | |
if (HostAddress == NULL || NumberOfBytes == NULL || DeviceAddress == NULL || Mapping == NULL) { | |
return EFI_INVALID_PARAMETER; | |
} | |
if (PciIoDevice->Attributes & EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE) { | |
Operation = Operation + EfiPciOperationBusMasterRead64; | |
} | |
Status = PciIoDevice->PciRootBridgeIo->Map ( | |
PciIoDevice->PciRootBridgeIo, | |
(EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_OPERATION) Operation, | |
HostAddress, | |
NumberOfBytes, | |
DeviceAddress, | |
Mapping | |
); | |
if (EFI_ERROR (Status)) { | |
ReportErrorStatusCode (PciIoDevice, EFI_IO_BUS_PCI | EFI_IOB_EC_CONTROLLER_ERROR); | |
} | |
return Status; | |
} | |
EFI_STATUS | |
EFIAPI | |
PciIoUnmap ( | |
IN EFI_PCI_IO_PROTOCOL *This, | |
IN VOID *Mapping | |
) | |
/*++ | |
Routine Description: | |
Unmaps a memory region for DMA | |
Arguments: | |
Returns: | |
None | |
--*/ | |
// TODO: This - add argument and description to function comment | |
// TODO: Mapping - add argument and description to function comment | |
{ | |
EFI_STATUS Status; | |
PCI_IO_DEVICE *PciIoDevice; | |
PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This); | |
Status = PciIoDevice->PciRootBridgeIo->Unmap ( | |
PciIoDevice->PciRootBridgeIo, | |
Mapping | |
); | |
if (EFI_ERROR (Status)) { | |
ReportErrorStatusCode (PciIoDevice, EFI_IO_BUS_PCI | EFI_IOB_EC_CONTROLLER_ERROR); | |
} | |
return Status; | |
} | |
EFI_STATUS | |
EFIAPI | |
PciIoAllocateBuffer ( | |
IN EFI_PCI_IO_PROTOCOL *This, | |
IN EFI_ALLOCATE_TYPE Type, | |
IN EFI_MEMORY_TYPE MemoryType, | |
IN UINTN Pages, | |
OUT VOID **HostAddress, | |
IN UINT64 Attributes | |
) | |
/*++ | |
Routine Description: | |
Allocates a common buffer for DMA | |
Arguments: | |
Returns: | |
None | |
--*/ | |
// TODO: This - add argument and description to function comment | |
// TODO: Type - add argument and description to function comment | |
// TODO: MemoryType - add argument and description to function comment | |
// TODO: Pages - add argument and description to function comment | |
// TODO: HostAddress - add argument and description to function comment | |
// TODO: Attributes - add argument and description to function comment | |
// TODO: EFI_UNSUPPORTED - add return value to function comment | |
{ | |
EFI_STATUS Status; | |
PCI_IO_DEVICE *PciIoDevice; | |
if (Attributes & | |
(~(EFI_PCI_ATTRIBUTE_MEMORY_WRITE_COMBINE | EFI_PCI_ATTRIBUTE_MEMORY_CACHED))) { | |
return EFI_UNSUPPORTED; | |
} | |
PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This); | |
if (PciIoDevice->Attributes & EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE) { | |
Attributes |= EFI_PCI_ATTRIBUTE_DUAL_ADDRESS_CYCLE; | |
} | |
Status = PciIoDevice->PciRootBridgeIo->AllocateBuffer ( | |
PciIoDevice->PciRootBridgeIo, | |
Type, | |
MemoryType, | |
Pages, | |
HostAddress, | |
Attributes | |
); | |
if (EFI_ERROR (Status)) { | |
ReportErrorStatusCode (PciIoDevice, EFI_IO_BUS_PCI | EFI_IOB_EC_CONTROLLER_ERROR); | |
} | |
return Status; | |
} | |
EFI_STATUS | |
EFIAPI | |
PciIoFreeBuffer ( | |
IN EFI_PCI_IO_PROTOCOL *This, | |
IN UINTN Pages, | |
IN VOID *HostAddress | |
) | |
/*++ | |
Routine Description: | |
Frees a common buffer | |
Arguments: | |
Returns: | |
None | |
--*/ | |
// TODO: This - add argument and description to function comment | |
// TODO: Pages - add argument and description to function comment | |
// TODO: HostAddress - add argument and description to function comment | |
{ | |
EFI_STATUS Status; | |
PCI_IO_DEVICE *PciIoDevice; | |
PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This); | |
Status = PciIoDevice->PciRootBridgeIo->FreeBuffer ( | |
PciIoDevice->PciRootBridgeIo, | |
Pages, | |
HostAddress | |
); | |
if (EFI_ERROR (Status)) { | |
ReportErrorStatusCode (PciIoDevice, EFI_IO_BUS_PCI | EFI_IOB_EC_CONTROLLER_ERROR); | |
} | |
return Status; | |
} | |
EFI_STATUS | |
EFIAPI | |
PciIoFlush ( | |
IN EFI_PCI_IO_PROTOCOL *This | |
) | |
/*++ | |
Routine Description: | |
Flushes a DMA buffer | |
Arguments: | |
Returns: | |
None | |
--*/ | |
// TODO: This - add argument and description to function comment | |
{ | |
EFI_STATUS Status; | |
PCI_IO_DEVICE *PciIoDevice; | |
PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This); | |
Status = PciIoDevice->PciRootBridgeIo->Flush ( | |
PciIoDevice->PciRootBridgeIo | |
); | |
if (EFI_ERROR (Status)) { | |
ReportErrorStatusCode (PciIoDevice, EFI_IO_BUS_PCI | EFI_IOB_EC_CONTROLLER_ERROR); | |
} | |
return Status; | |
} | |
EFI_STATUS | |
EFIAPI | |
PciIoGetLocation ( | |
IN EFI_PCI_IO_PROTOCOL *This, | |
OUT UINTN *Segment, | |
OUT UINTN *Bus, | |
OUT UINTN *Device, | |
OUT UINTN *Function | |
) | |
/*++ | |
Routine Description: | |
Gets a PCI device's current bus number, device number, and function number. | |
Arguments: | |
Returns: | |
None | |
--*/ | |
// TODO: This - add argument and description to function comment | |
// TODO: Segment - add argument and description to function comment | |
// TODO: Bus - add argument and description to function comment | |
// TODO: Device - add argument and description to function comment | |
// TODO: Function - add argument and description to function comment | |
// TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
// TODO: EFI_SUCCESS - add return value to function comment | |
{ | |
PCI_IO_DEVICE *PciIoDevice; | |
PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This); | |
if (Segment == NULL || Bus == NULL || Device == NULL || Function == NULL) { | |
return EFI_INVALID_PARAMETER; | |
} | |
*Segment = PciIoDevice->PciRootBridgeIo->SegmentNumber; | |
*Bus = PciIoDevice->BusNumber; | |
*Device = PciIoDevice->DeviceNumber; | |
*Function = PciIoDevice->FunctionNumber; | |
return EFI_SUCCESS; | |
} | |
BOOLEAN | |
CheckBarType ( | |
IN PCI_IO_DEVICE *PciIoDevice, | |
UINT8 BarIndex, | |
PCI_BAR_TYPE BarType | |
) | |
/*++ | |
Routine Description: | |
Sets a PCI controllers attributes on a resource range | |
Arguments: | |
Returns: | |
None | |
--*/ | |
// TODO: PciIoDevice - add argument and description to function comment | |
// TODO: BarIndex - add argument and description to function comment | |
// TODO: BarType - add argument and description to function comment | |
{ | |
switch (BarType) { | |
case PciBarTypeMem: | |
if (PciIoDevice->PciBar[BarIndex].BarType != PciBarTypeMem32 && | |
PciIoDevice->PciBar[BarIndex].BarType != PciBarTypePMem32 && | |
PciIoDevice->PciBar[BarIndex].BarType != PciBarTypePMem64 && | |
PciIoDevice->PciBar[BarIndex].BarType != PciBarTypeMem64 ) { | |
return FALSE; | |
} | |
return TRUE; | |
case PciBarTypeIo: | |
if (PciIoDevice->PciBar[BarIndex].BarType != PciBarTypeIo32 && | |
PciIoDevice->PciBar[BarIndex].BarType != PciBarTypeIo16){ | |
return FALSE; | |
} | |
return TRUE; | |
default: | |
break; | |
} | |
return FALSE; | |
} | |
EFI_STATUS | |
ModifyRootBridgeAttributes ( | |
IN PCI_IO_DEVICE *PciIoDevice, | |
IN UINT64 Attributes, | |
IN EFI_PCI_IO_PROTOCOL_ATTRIBUTE_OPERATION Operation | |
) | |
/*++ | |
Routine Description: | |
Set new attributes to a Root Bridge | |
Arguments: | |
Returns: | |
None | |
--*/ | |
// TODO: PciIoDevice - add argument and description to function comment | |
// TODO: Attributes - add argument and description to function comment | |
// TODO: Operation - add argument and description to function comment | |
// TODO: EFI_UNSUPPORTED - add return value to function comment | |
// TODO: EFI_UNSUPPORTED - add return value to function comment | |
// TODO: EFI_SUCCESS - add return value to function comment | |
{ | |
UINT64 PciRootBridgeSupports; | |
UINT64 PciRootBridgeAttributes; | |
UINT64 NewPciRootBridgeAttributes; | |
EFI_STATUS Status; | |
// | |
// Get the current attributes of this PCI device's PCI Root Bridge | |
// | |
Status = PciIoDevice->PciRootBridgeIo->GetAttributes ( | |
PciIoDevice->PciRootBridgeIo, | |
&PciRootBridgeSupports, | |
&PciRootBridgeAttributes | |
); | |
if (EFI_ERROR (Status)) { | |
return EFI_UNSUPPORTED; | |
} | |
// | |
// Record the new attribute of the Root Bridge | |
// | |
if (Operation == EfiPciIoAttributeOperationEnable) { | |
NewPciRootBridgeAttributes = PciRootBridgeAttributes | Attributes; | |
} else { | |
NewPciRootBridgeAttributes = PciRootBridgeAttributes & (~Attributes); | |
} | |
// | |
// Call the PCI Root Bridge to attempt to modify the attributes | |
// | |
if (NewPciRootBridgeAttributes ^ PciRootBridgeAttributes) { | |
Status = PciIoDevice->PciRootBridgeIo->SetAttributes ( | |
PciIoDevice->PciRootBridgeIo, | |
NewPciRootBridgeAttributes, | |
NULL, | |
NULL | |
); | |
if (EFI_ERROR (Status)) { | |
// | |
// The PCI Root Bridge could not modify the attributes, so return the error. | |
// | |
return EFI_UNSUPPORTED; | |
} | |
} | |
// | |
// Also update the attributes for this Root Bridge structure | |
// | |
PciIoDevice->Attributes = NewPciRootBridgeAttributes; | |
return EFI_SUCCESS; | |
} | |
EFI_STATUS | |
SupportPaletteSnoopAttributes ( | |
IN PCI_IO_DEVICE *PciIoDevice, | |
IN EFI_PCI_IO_PROTOCOL_ATTRIBUTE_OPERATION Operation | |
) | |
/*++ | |
Routine Description: | |
Check whether this device can be enable/disable to snoop | |
Arguments: | |
Returns: | |
None | |
--*/ | |
// TODO: PciIoDevice - add argument and description to function comment | |
// TODO: Operation - add argument and description to function comment | |
// TODO: EFI_UNSUPPORTED - add return value to function comment | |
// TODO: EFI_SUCCESS - add return value to function comment | |
// TODO: EFI_SUCCESS - add return value to function comment | |
// TODO: EFI_UNSUPPORTED - add return value to function comment | |
// TODO: EFI_UNSUPPORTED - add return value to function comment | |
// TODO: EFI_SUCCESS - add return value to function comment | |
// TODO: EFI_UNSUPPORTED - add return value to function comment | |
// TODO: EFI_UNSUPPORTED - add return value to function comment | |
// TODO: EFI_SUCCESS - add return value to function comment | |
{ | |
PCI_IO_DEVICE *Temp; | |
UINT16 VGACommand; | |
// | |
// Snoop attribute can be only modified by GFX | |
// | |
if (!IS_PCI_GFX (&PciIoDevice->Pci)) { | |
return EFI_UNSUPPORTED; | |
} | |
// | |
// Get the boot VGA on the same segement | |
// | |
Temp = ActiveVGADeviceOnTheSameSegment (PciIoDevice); | |
if (!Temp) { | |
// | |
// If there is no VGA device on the segement, set | |
// this graphics card to decode the palette range | |
// | |
return EFI_SUCCESS; | |
} | |
// | |
// Check these two agents are on the same path | |
// | |
if (!PciDevicesOnTheSamePath (Temp, PciIoDevice)) { | |
// | |
// they are not on the same path, so snoop can be enabled or disabled | |
// | |
return EFI_SUCCESS; | |
} | |
// | |
// Check if they are on the same bus | |
// | |
if (Temp->Parent == PciIoDevice->Parent) { | |
PciReadCommandRegister (Temp, &VGACommand); | |
// | |
// If they are on the same bus, either one can | |
// be set to snoop, the other set to decode | |
// | |
if (VGACommand & EFI_PCI_COMMAND_VGA_PALETTE_SNOOP) { | |
// | |
// VGA has set to snoop, so GFX can be only set to disable snoop | |
// | |
if (Operation == EfiPciIoAttributeOperationEnable) { | |
return EFI_UNSUPPORTED; | |
} | |
} else { | |
// | |
// VGA has disabled to snoop, so GFX can be only enabled | |
// | |
if (Operation == EfiPciIoAttributeOperationDisable) { | |
return EFI_UNSUPPORTED; | |
} | |
} | |
return EFI_SUCCESS; | |
} | |
// | |
// If they are on the same path but on the different bus | |
// The first agent is set to snoop, the second one set to | |
// decode | |
// | |
if (Temp->BusNumber > PciIoDevice->BusNumber) { | |
// | |
// GFX should be set to decode | |
// | |
if (Operation == EfiPciIoAttributeOperationDisable) { | |
PciEnableCommandRegister (Temp, EFI_PCI_COMMAND_VGA_PALETTE_SNOOP); | |
Temp->Attributes |= EFI_PCI_COMMAND_VGA_PALETTE_SNOOP; | |
} else { | |
return EFI_UNSUPPORTED; | |
} | |
} else { | |
// | |
// GFX should be set to snoop | |
// | |
if (Operation == EfiPciIoAttributeOperationEnable) { | |
PciDisableCommandRegister (Temp, EFI_PCI_COMMAND_VGA_PALETTE_SNOOP); | |
Temp->Attributes &= (~EFI_PCI_COMMAND_VGA_PALETTE_SNOOP); | |
} else { | |
return EFI_UNSUPPORTED; | |
} | |
} | |
return EFI_SUCCESS; | |
} | |
EFI_STATUS | |
EFIAPI | |
PciIoAttributes ( | |
IN EFI_PCI_IO_PROTOCOL * This, | |
IN EFI_PCI_IO_PROTOCOL_ATTRIBUTE_OPERATION Operation, | |
IN UINT64 Attributes, | |
OUT UINT64 *Result OPTIONAL | |
) | |
/*++ | |
Routine Description: | |
Arguments: | |
Returns: | |
None | |
--*/ | |
// TODO: This - add argument and description to function comment | |
// TODO: Operation - add argument and description to function comment | |
// TODO: Attributes - add argument and description to function comment | |
// TODO: Result - add argument and description to function comment | |
// TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
// TODO: EFI_SUCCESS - add return value to function comment | |
// TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
// TODO: EFI_SUCCESS - add return value to function comment | |
// TODO: EFI_UNSUPPORTED - add return value to function comment | |
// TODO: EFI_UNSUPPORTED - add return value to function comment | |
// TODO: EFI_SUCCESS - add return value to function comment | |
// TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
// TODO: EFI_UNSUPPORTED - add return value to function comment | |
// TODO: EFI_UNSUPPORTED - add return value to function comment | |
// TODO: EFI_UNSUPPORTED - add return value to function comment | |
{ | |
EFI_STATUS Status; | |
PCI_IO_DEVICE *PciIoDevice; | |
PCI_IO_DEVICE *UpStreamBridge; | |
PCI_IO_DEVICE *Temp; | |
UINT64 Supports; | |
UINT64 UpStreamAttributes; | |
UINT16 BridgeControl; | |
UINT16 Command; | |
PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This); | |
switch (Operation) { | |
case EfiPciIoAttributeOperationGet: | |
if (Result == NULL) { | |
return EFI_INVALID_PARAMETER; | |
} | |
*Result = PciIoDevice->Attributes; | |
return EFI_SUCCESS; | |
case EfiPciIoAttributeOperationSupported: | |
if (Result == NULL) { | |
return EFI_INVALID_PARAMETER; | |
} | |
*Result = PciIoDevice->Supports; | |
return EFI_SUCCESS; | |
case EfiPciIoAttributeOperationSet: | |
Status = PciIoDevice->PciIo.Attributes ( | |
&(PciIoDevice->PciIo), | |
EfiPciIoAttributeOperationEnable, | |
Attributes, | |
NULL | |
); | |
if (EFI_ERROR (Status)) { | |
return EFI_UNSUPPORTED; | |
} | |
Status = PciIoDevice->PciIo.Attributes ( | |
&(PciIoDevice->PciIo), | |
EfiPciIoAttributeOperationDisable, | |
(~Attributes) & (PciIoDevice->Supports), | |
NULL | |
); | |
if (EFI_ERROR (Status)) { | |
return EFI_UNSUPPORTED; | |
} | |
return EFI_SUCCESS; | |
case EfiPciIoAttributeOperationEnable: | |
case EfiPciIoAttributeOperationDisable: | |
break; | |
default: | |
return EFI_INVALID_PARAMETER; | |
} | |
// | |
// Just a trick for ENABLE attribute | |
// | |
if ((Attributes & EFI_PCI_DEVICE_ENABLE) == EFI_PCI_DEVICE_ENABLE) { | |
Attributes &= (PciIoDevice->Supports); | |
// | |
// Raise the EFI_P_PC_ENABLE Status code | |
// | |
REPORT_STATUS_CODE_WITH_DEVICE_PATH ( | |
EFI_PROGRESS_CODE, | |
EFI_IO_BUS_PCI | EFI_P_PC_ENABLE, | |
PciIoDevice->DevicePath | |
); | |
} | |
// | |
// If no attributes can be supported, then return. | |
// Otherwise, set the attributes that it can support. | |
// | |
Supports = (PciIoDevice->Supports) & Attributes; | |
if (Supports != Attributes) { | |
return EFI_UNSUPPORTED; | |
} | |
// | |
// For Root Bridge, just call RootBridgeIo to set attributes; | |
// | |
if (!PciIoDevice->Parent) { | |
Status = ModifyRootBridgeAttributes (PciIoDevice, Attributes, Operation); | |
return Status; | |
} | |
Command = 0; | |
BridgeControl = 0; | |
// | |
// For PPB & P2C, set relevant attribute bits | |
// | |
if (IS_PCI_BRIDGE (&PciIoDevice->Pci) || IS_CARDBUS_BRIDGE (&PciIoDevice->Pci)) { | |
if (Attributes & EFI_PCI_IO_ATTRIBUTE_VGA_IO) { | |
BridgeControl |= EFI_PCI_BRIDGE_CONTROL_VGA; | |
} | |
if (Attributes & EFI_PCI_IO_ATTRIBUTE_ISA_IO) { | |
BridgeControl |= EFI_PCI_BRIDGE_CONTROL_ISA; | |
} | |
if (Attributes & EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO) { | |
Command |= EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO; | |
} | |
} else { | |
// | |
// Do with the attributes on VGA | |
// | |
if ((Attributes & EFI_PCI_IO_ATTRIBUTE_VGA_IO) || | |
(IS_PCI_VGA(&PciIoDevice->Pci) && | |
((Attributes & EFI_PCI_IO_ATTRIBUTE_IO) || | |
(Attributes & EFI_PCI_IO_ATTRIBUTE_MEMORY)))) { | |
// | |
// Check if a VGA has been enabled before enabling a new one | |
// | |
if (Operation == EfiPciIoAttributeOperationEnable) { | |
// | |
// Check if there have been an active VGA device on the same segment | |
// | |
Temp = ActiveVGADeviceOnTheSameSegment (PciIoDevice); | |
if (Temp && Temp != PciIoDevice) { | |
// | |
// An active VGA has been detected, so can not enable another | |
// | |
return EFI_UNSUPPORTED; | |
} | |
} | |
} | |
// | |
// Do with the attributes on GFX | |
// | |
if (Attributes & EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO) { | |
if (Operation == EfiPciIoAttributeOperationEnable) { | |
// | |
// Check if snoop can be enabled in current configuration | |
// | |
Status = SupportPaletteSnoopAttributes (PciIoDevice, Operation); | |
if (EFI_ERROR (Status)) { | |
// | |
// Enable operation is forbidden, so mask the bit in attributes | |
// so as to keep consistent with the actual Status | |
// | |
// Attributes &= (~EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO); | |
// | |
// | |
// | |
return EFI_UNSUPPORTED; | |
} | |
} | |
// | |
// It can be supported, so get ready to set the bit | |
// | |
Command |= EFI_PCI_COMMAND_VGA_PALETTE_SNOOP; | |
} | |
} | |
if (Attributes & EFI_PCI_IO_ATTRIBUTE_IO) { | |
Command |= EFI_PCI_COMMAND_IO_SPACE; | |
} | |
if (Attributes & EFI_PCI_IO_ATTRIBUTE_MEMORY) { | |
Command |= EFI_PCI_COMMAND_MEMORY_SPACE; | |
} | |
if (Attributes & EFI_PCI_IO_ATTRIBUTE_BUS_MASTER) { | |
Command |= EFI_PCI_COMMAND_BUS_MASTER; | |
} | |
// | |
// The upstream bridge should be also set to revelant attribute | |
// expect for IO, Mem and BusMaster | |
// | |
UpStreamAttributes = Attributes & | |
(~(EFI_PCI_IO_ATTRIBUTE_IO | | |
EFI_PCI_IO_ATTRIBUTE_MEMORY | | |
EFI_PCI_IO_ATTRIBUTE_BUS_MASTER | |
) | |
); | |
UpStreamBridge = PciIoDevice->Parent; | |
if (Operation == EfiPciIoAttributeOperationEnable) { | |
// | |
// Enable relevant attributes to command register and bridge control register | |
// | |
Status = PciEnableCommandRegister (PciIoDevice, Command); | |
if (BridgeControl) { | |
Status = PciEnableBridgeControlRegister (PciIoDevice, BridgeControl); | |
} | |
PciIoDevice->Attributes |= Attributes; | |
// | |
// Enable attributes of the upstream bridge | |
// | |
Status = UpStreamBridge->PciIo.Attributes ( | |
&(UpStreamBridge->PciIo), | |
EfiPciIoAttributeOperationEnable, | |
UpStreamAttributes, | |
NULL | |
); | |
} else { | |
// | |
// Disable relevant attributes to command register and bridge control register | |
// | |
Status = PciDisableCommandRegister (PciIoDevice, Command); | |
if (BridgeControl) { | |
Status = PciDisableBridgeControlRegister (PciIoDevice, BridgeControl); | |
} | |
PciIoDevice->Attributes &= (~Attributes); | |
Status = EFI_SUCCESS; | |
} | |
if (EFI_ERROR (Status)) { | |
ReportErrorStatusCode (PciIoDevice, EFI_IO_BUS_PCI | EFI_IOB_EC_CONTROLLER_ERROR); | |
} | |
return Status; | |
} | |
EFI_STATUS | |
EFIAPI | |
PciIoGetBarAttributes ( | |
IN EFI_PCI_IO_PROTOCOL * This, | |
IN UINT8 BarIndex, | |
OUT UINT64 *Supports, OPTIONAL | |
OUT VOID **Resources OPTIONAL | |
) | |
/*++ | |
Routine Description: | |
Arguments: | |
Returns: | |
None | |
--*/ | |
// TODO: This - add argument and description to function comment | |
// TODO: BarIndex - add argument and description to function comment | |
// TODO: Supports - add argument and description to function comment | |
// TODO: Resources - add argument and description to function comment | |
// TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
// TODO: EFI_UNSUPPORTED - add return value to function comment | |
// TODO: EFI_OUT_OF_RESOURCES - add return value to function comment | |
// TODO: EFI_SUCCESS - add return value to function comment | |
{ | |
UINT8 *Configuration; | |
UINT8 NumConfig; | |
PCI_IO_DEVICE *PciIoDevice; | |
EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Ptr; | |
EFI_ACPI_END_TAG_DESCRIPTOR *PtrEnd; | |
NumConfig = 0; | |
PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This); | |
if (Supports == NULL && Resources == NULL) { | |
return EFI_INVALID_PARAMETER; | |
} | |
if (BarIndex >= PCI_MAX_BAR) { | |
return EFI_UNSUPPORTED; | |
} | |
// | |
// This driver does not support modifications to the WRITE_COMBINE or | |
// CACHED attributes for BAR ranges. | |
// | |
if (Supports != NULL) { | |
*Supports = PciIoDevice->Supports & EFI_PCI_IO_ATTRIBUTE_MEMORY_CACHED & EFI_PCI_IO_ATTRIBUTE_MEMORY_WRITE_COMBINE; | |
} | |
if (Resources != NULL) { | |
if (PciIoDevice->PciBar[BarIndex].BarType != PciBarTypeUnknown) { | |
NumConfig = 1; | |
} | |
Configuration = AllocatePool (sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) * NumConfig + sizeof (EFI_ACPI_END_TAG_DESCRIPTOR)); | |
if (Configuration == NULL) { | |
return EFI_OUT_OF_RESOURCES; | |
} | |
ZeroMem ( | |
Configuration, | |
sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) * NumConfig + sizeof (EFI_ACPI_END_TAG_DESCRIPTOR) | |
); | |
Ptr = (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *) Configuration; | |
if (NumConfig == 1) { | |
Ptr->Desc = ACPI_ADDRESS_SPACE_DESCRIPTOR; | |
Ptr->Len = sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) - 3; | |
Ptr->AddrRangeMin = PciIoDevice->PciBar[BarIndex].BaseAddress; | |
Ptr->AddrLen = PciIoDevice->PciBar[BarIndex].Length; | |
Ptr->AddrRangeMax = PciIoDevice->PciBar[BarIndex].Alignment; | |
switch (PciIoDevice->PciBar[BarIndex].BarType) { | |
case PciBarTypeIo16: | |
case PciBarTypeIo32: | |
// | |
// Io | |
// | |
Ptr->ResType = ACPI_ADDRESS_SPACE_TYPE_IO; | |
break; | |
case PciBarTypeMem32: | |
// | |
// Mem | |
// | |
Ptr->ResType = ACPI_ADDRESS_SPACE_TYPE_MEM; | |
// | |
// 32 bit | |
// | |
Ptr->AddrSpaceGranularity = 32; | |
break; | |
case PciBarTypePMem32: | |
// | |
// Mem | |
// | |
Ptr->ResType = ACPI_ADDRESS_SPACE_TYPE_MEM; | |
// | |
// prefechable | |
// | |
Ptr->SpecificFlag = 0x6; | |
// | |
// 32 bit | |
// | |
Ptr->AddrSpaceGranularity = 32; | |
break; | |
case PciBarTypeMem64: | |
// | |
// Mem | |
// | |
Ptr->ResType = ACPI_ADDRESS_SPACE_TYPE_MEM; | |
// | |
// 64 bit | |
// | |
Ptr->AddrSpaceGranularity = 64; | |
break; | |
case PciBarTypePMem64: | |
// | |
// Mem | |
// | |
Ptr->ResType = ACPI_ADDRESS_SPACE_TYPE_MEM; | |
// | |
// prefechable | |
// | |
Ptr->SpecificFlag = 0x6; | |
// | |
// 64 bit | |
// | |
Ptr->AddrSpaceGranularity = 64; | |
break; | |
default: | |
break; | |
} | |
Ptr = (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *) ((UINT8 *) Ptr + sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR)); | |
} | |
// | |
// put the checksum | |
// | |
PtrEnd = (EFI_ACPI_END_TAG_DESCRIPTOR *) ((UINT8 *) Ptr); | |
PtrEnd->Desc = ACPI_END_TAG_DESCRIPTOR; | |
PtrEnd->Checksum = 0; | |
*Resources = Configuration; | |
} | |
return EFI_SUCCESS; | |
} | |
EFI_STATUS | |
EFIAPI | |
PciIoSetBarAttributes ( | |
IN EFI_PCI_IO_PROTOCOL *This, | |
IN UINT64 Attributes, | |
IN UINT8 BarIndex, | |
IN OUT UINT64 *Offset, | |
IN OUT UINT64 *Length | |
) | |
/*++ | |
Routine Description: | |
Arguments: | |
Returns: | |
None | |
--*/ | |
// TODO: This - add argument and description to function comment | |
// TODO: Attributes - add argument and description to function comment | |
// TODO: BarIndex - add argument and description to function comment | |
// TODO: Offset - add argument and description to function comment | |
// TODO: Length - add argument and description to function comment | |
// TODO: EFI_INVALID_PARAMETER - add return value to function comment | |
// TODO: EFI_UNSUPPORTED - add return value to function comment | |
// TODO: EFI_UNSUPPORTED - add return value to function comment | |
// TODO: EFI_UNSUPPORTED - add return value to function comment | |
// TODO: EFI_SUCCESS - add return value to function comment | |
{ | |
EFI_STATUS Status; | |
PCI_IO_DEVICE *PciIoDevice; | |
UINT64 NonRelativeOffset; | |
UINT64 Supports; | |
PciIoDevice = PCI_IO_DEVICE_FROM_PCI_IO_THIS (This); | |
// | |
// Make sure Offset and Length are not NULL | |
// | |
if (Offset == NULL || Length == NULL) { | |
return EFI_INVALID_PARAMETER; | |
} | |
if (PciIoDevice->PciBar[BarIndex].BarType == PciBarTypeUnknown) { | |
return EFI_UNSUPPORTED; | |
} | |
// | |
// This driver does not support setting the WRITE_COMBINE or the CACHED attributes. | |
// If Attributes is not 0, then return EFI_UNSUPPORTED. | |
// | |
Supports = PciIoDevice->Supports & EFI_PCI_IO_ATTRIBUTE_MEMORY_CACHED & EFI_PCI_IO_ATTRIBUTE_MEMORY_WRITE_COMBINE; | |
if (Attributes != (Attributes & Supports)) { | |
return EFI_UNSUPPORTED; | |
} | |
// | |
// Attributes must be supported. Make sure the BAR range describd by BarIndex, Offset, and | |
// Length are valid for this PCI device. | |
// | |
NonRelativeOffset = *Offset; | |
Status = PciIoVerifyBarAccess ( | |
PciIoDevice, | |
BarIndex, | |
PciBarTypeMem, | |
EfiPciIoWidthUint8, | |
(UINT32) *Length, | |
&NonRelativeOffset | |
); | |
if (EFI_ERROR (Status)) { | |
return EFI_UNSUPPORTED; | |
} | |
return EFI_SUCCESS; | |
} | |
EFI_STATUS | |
UpStreamBridgesAttributes ( | |
IN PCI_IO_DEVICE *PciIoDevice, | |
IN EFI_PCI_IO_PROTOCOL_ATTRIBUTE_OPERATION Operation, | |
IN UINT64 Attributes | |
) | |
/*++ | |
Routine Description: | |
Arguments: | |
Returns: | |
None | |
--*/ | |
// TODO: PciIoDevice - add argument and description to function comment | |
// TODO: Operation - add argument and description to function comment | |
// TODO: Attributes - add argument and description to function comment | |
// TODO: EFI_SUCCESS - add return value to function comment | |
{ | |
PCI_IO_DEVICE *Parent; | |
EFI_PCI_IO_PROTOCOL *PciIo; | |
Parent = PciIoDevice->Parent; | |
while (Parent && IS_PCI_BRIDGE (&Parent->Pci)) { | |
// | |
// Get the PciIo Protocol | |
// | |
PciIo = &Parent->PciIo; | |
PciIo->Attributes (PciIo, Operation, Attributes, NULL); | |
Parent = Parent->Parent; | |
} | |
return EFI_SUCCESS; | |
} | |
BOOLEAN | |
PciDevicesOnTheSamePath ( | |
IN PCI_IO_DEVICE *PciDevice1, | |
IN PCI_IO_DEVICE *PciDevice2 | |
) | |
/*++ | |
Routine Description: | |
Arguments: | |
Returns: | |
None | |
--*/ | |
// TODO: PciDevice1 - add argument and description to function comment | |
// TODO: PciDevice2 - add argument and description to function comment | |
{ | |
if (PciDevice1->Parent == PciDevice2->Parent) { | |
return TRUE; | |
} | |
if (PciDevice1->BusNumber > PciDevice2->BusNumber) { | |
return PciDeviceExisted (PciDevice1->Parent, PciDevice2); | |
} | |
return PciDeviceExisted (PciDevice2->Parent, PciDevice1); | |
} |