| /* minigzip.c -- simulate gzip using the zlib compression library | |
| * Copyright (C) 1995-2006, 2010, 2011 Jean-loup Gailly. | |
| * For conditions of distribution and use, see copyright notice in zlib.h | |
| */ | |
| /* | |
| * minigzip is a minimal implementation of the gzip utility. This is | |
| * only an example of using zlib and isn't meant to replace the | |
| * full-featured gzip. No attempt is made to deal with file systems | |
| * limiting names to 14 or 8+3 characters, etc... Error checking is | |
| * very limited. So use minigzip only for testing; use gzip for the | |
| * real thing. On MSDOS, use only on file names without extension | |
| * or in pipe mode. | |
| */ | |
| /* @(#) $Id$ */ | |
| #include "zlib.h" | |
| #include <stdio.h> | |
| #ifdef STDC | |
| # include <string.h> | |
| # include <stdlib.h> | |
| #endif | |
| #ifdef USE_MMAP | |
| # include <sys/types.h> | |
| # include <sys/mman.h> | |
| # include <sys/stat.h> | |
| #endif | |
| #if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__) | |
| # include <fcntl.h> | |
| # include <io.h> | |
| # ifdef UNDER_CE | |
| # include <stdlib.h> | |
| # endif | |
| # define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY) | |
| #else | |
| # define SET_BINARY_MODE(file) | |
| #endif | |
| #ifdef _MSC_VER | |
| # define snprintf _snprintf | |
| #endif | |
| #ifdef VMS | |
| # define unlink delete | |
| # define GZ_SUFFIX "-gz" | |
| #endif | |
| #ifdef RISCOS | |
| # define unlink remove | |
| # define GZ_SUFFIX "-gz" | |
| # define fileno(file) file->__file | |
| #endif | |
| #if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os | |
| # include <unix.h> /* for fileno */ | |
| #endif | |
| #if !defined(Z_HAVE_UNISTD_H) && !defined(_LARGEFILE64_SOURCE) | |
| #ifndef WIN32 /* unlink already in stdio.h for WIN32 */ | |
| extern int unlink OF((const char *)); | |
| #endif | |
| #endif | |
| #if defined(UNDER_CE) | |
| # include <windows.h> | |
| # define perror(s) pwinerror(s) | |
| /* Map the Windows error number in ERROR to a locale-dependent error | |
| message string and return a pointer to it. Typically, the values | |
| for ERROR come from GetLastError. | |
| The string pointed to shall not be modified by the application, | |
| but may be overwritten by a subsequent call to strwinerror | |
| The strwinerror function does not change the current setting | |
| of GetLastError. */ | |
| static char *strwinerror (error) | |
| DWORD error; | |
| { | |
| static char buf[1024]; | |
| wchar_t *msgbuf; | |
| DWORD lasterr = GetLastError(); | |
| DWORD chars = FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM | |
| | FORMAT_MESSAGE_ALLOCATE_BUFFER, | |
| NULL, | |
| error, | |
| 0, /* Default language */ | |
| (LPVOID)&msgbuf, | |
| 0, | |
| NULL); | |
| if (chars != 0) { | |
| /* If there is an \r\n appended, zap it. */ | |
| if (chars >= 2 | |
| && msgbuf[chars - 2] == '\r' && msgbuf[chars - 1] == '\n') { | |
| chars -= 2; | |
| msgbuf[chars] = 0; | |
| } | |
| if (chars > sizeof (buf) - 1) { | |
| chars = sizeof (buf) - 1; | |
| msgbuf[chars] = 0; | |
| } | |
| wcstombs(buf, msgbuf, chars + 1); | |
| LocalFree(msgbuf); | |
| } | |
| else { | |
| sprintf(buf, "unknown win32 error (%ld)", error); | |
| } | |
| SetLastError(lasterr); | |
| return buf; | |
| } | |
| static void pwinerror (s) | |
| const char *s; | |
| { | |
| if (s && *s) | |
| fprintf(stderr, "%s: %s\n", s, strwinerror(GetLastError ())); | |
| else | |
| fprintf(stderr, "%s\n", strwinerror(GetLastError ())); | |
| } | |
| #endif /* UNDER_CE */ | |
| #ifndef GZ_SUFFIX | |
| # define GZ_SUFFIX ".gz" | |
| #endif | |
| #define SUFFIX_LEN (sizeof(GZ_SUFFIX)-1) | |
| #define BUFLEN 16384 | |
| #define MAX_NAME_LEN 1024 | |
| #ifdef MAXSEG_64K | |
| # define local static | |
| /* Needed for systems with limitation on stack size. */ | |
| #else | |
| # define local | |
| #endif | |
| #ifdef Z_SOLO | |
| /* for Z_SOLO, create simplified gz* functions using deflate and inflate */ | |
| #if defined(Z_HAVE_UNISTD_H) || defined(Z_LARGE) | |
| # include <unistd.h> /* for unlink() */ | |
| #endif | |
| void *myalloc OF((void *, unsigned, unsigned)); | |
| void myfree OF((void *, void *)); | |
| void *myalloc(q, n, m) | |
| void *q; | |
| unsigned n, m; | |
| { | |
| q = Z_NULL; | |
| return calloc(n, m); | |
| } | |
| void myfree(q, p) | |
| void *q, *p; | |
| { | |
| q = Z_NULL; | |
| free(p); | |
| } | |
| typedef struct gzFile_s { | |
| FILE *file; | |
| int write; | |
| int err; | |
| char *msg; | |
| z_stream strm; | |
| } *gzFile; | |
| gzFile gzopen OF((const char *, const char *)); | |
| gzFile gzdopen OF((int, const char *)); | |
| gzFile gz_open OF((const char *, int, const char *)); | |
| gzFile gzopen(path, mode) | |
| const char *path; | |
| const char *mode; | |
| { | |
| return gz_open(path, -1, mode); | |
| } | |
| gzFile gzdopen(fd, mode) | |
| int fd; | |
| const char *mode; | |
| { | |
| return gz_open(NULL, fd, mode); | |
| } | |
| gzFile gz_open(path, fd, mode) | |
| const char *path; | |
| int fd; | |
| const char *mode; | |
| { | |
| gzFile gz; | |
| int ret; | |
| gz = malloc(sizeof(struct gzFile_s)); | |
| if (gz == NULL) | |
| return NULL; | |
| gz->write = strchr(mode, 'w') != NULL; | |
| gz->strm.zalloc = myalloc; | |
| gz->strm.zfree = myfree; | |
| gz->strm.opaque = Z_NULL; | |
| if (gz->write) | |
| ret = deflateInit2(&(gz->strm), -1, 8, 15 + 16, 8, 0); | |
| else { | |
| gz->strm.next_in = 0; | |
| gz->strm.avail_in = Z_NULL; | |
| ret = inflateInit2(&(gz->strm), 15 + 16); | |
| } | |
| if (ret != Z_OK) { | |
| free(gz); | |
| return NULL; | |
| } | |
| gz->file = path == NULL ? fdopen(fd, gz->write ? "wb" : "rb") : | |
| fopen(path, gz->write ? "wb" : "rb"); | |
| if (gz->file == NULL) { | |
| gz->write ? deflateEnd(&(gz->strm)) : inflateEnd(&(gz->strm)); | |
| free(gz); | |
| return NULL; | |
| } | |
| gz->err = 0; | |
| gz->msg = ""; | |
| return gz; | |
| } | |
| int gzwrite OF((gzFile, const void *, unsigned)); | |
| int gzwrite(gz, buf, len) | |
| gzFile gz; | |
| const void *buf; | |
| unsigned len; | |
| { | |
| z_stream *strm; | |
| unsigned char out[BUFLEN]; | |
| if (gz == NULL || !gz->write) | |
| return 0; | |
| strm = &(gz->strm); | |
| strm->next_in = (void *)buf; | |
| strm->avail_in = len; | |
| do { | |
| strm->next_out = out; | |
| strm->avail_out = BUFLEN; | |
| (void)deflate(strm, Z_NO_FLUSH); | |
| fwrite(out, 1, BUFLEN - strm->avail_out, gz->file); | |
| } while (strm->avail_out == 0); | |
| return len; | |
| } | |
| int gzread OF((gzFile, void *, unsigned)); | |
| int gzread(gz, buf, len) | |
| gzFile gz; | |
| void *buf; | |
| unsigned len; | |
| { | |
| int ret; | |
| unsigned got; | |
| unsigned char in[1]; | |
| z_stream *strm; | |
| if (gz == NULL || gz->write) | |
| return 0; | |
| if (gz->err) | |
| return 0; | |
| strm = &(gz->strm); | |
| strm->next_out = (void *)buf; | |
| strm->avail_out = len; | |
| do { | |
| got = fread(in, 1, 1, gz->file); | |
| if (got == 0) | |
| break; | |
| strm->next_in = in; | |
| strm->avail_in = 1; | |
| ret = inflate(strm, Z_NO_FLUSH); | |
| if (ret == Z_DATA_ERROR) { | |
| gz->err = Z_DATA_ERROR; | |
| gz->msg = strm->msg; | |
| return 0; | |
| } | |
| if (ret == Z_STREAM_END) | |
| inflateReset(strm); | |
| } while (strm->avail_out); | |
| return len - strm->avail_out; | |
| } | |
| int gzclose OF((gzFile)); | |
| int gzclose(gz) | |
| gzFile gz; | |
| { | |
| z_stream *strm; | |
| unsigned char out[BUFLEN]; | |
| if (gz == NULL) | |
| return Z_STREAM_ERROR; | |
| strm = &(gz->strm); | |
| if (gz->write) { | |
| strm->next_in = Z_NULL; | |
| strm->avail_in = 0; | |
| do { | |
| strm->next_out = out; | |
| strm->avail_out = BUFLEN; | |
| (void)deflate(strm, Z_FINISH); | |
| fwrite(out, 1, BUFLEN - strm->avail_out, gz->file); | |
| } while (strm->avail_out == 0); | |
| deflateEnd(strm); | |
| } | |
| else | |
| inflateEnd(strm); | |
| fclose(gz->file); | |
| free(gz); | |
| return Z_OK; | |
| } | |
| const char *gzerror OF((gzFile, int *)); | |
| const char *gzerror(gz, err) | |
| gzFile gz; | |
| int *err; | |
| { | |
| *err = gz->err; | |
| return gz->msg; | |
| } | |
| #endif | |
| char *prog; | |
| void error OF((const char *msg)); | |
| void gz_compress OF((FILE *in, gzFile out)); | |
| #ifdef USE_MMAP | |
| int gz_compress_mmap OF((FILE *in, gzFile out)); | |
| #endif | |
| void gz_uncompress OF((gzFile in, FILE *out)); | |
| void file_compress OF((char *file, char *mode)); | |
| void file_uncompress OF((char *file)); | |
| int main OF((int argc, char *argv[])); | |
| /* =========================================================================== | |
| * Display error message and exit | |
| */ | |
| void error(msg) | |
| const char *msg; | |
| { | |
| fprintf(stderr, "%s: %s\n", prog, msg); | |
| exit(1); | |
| } | |
| /* =========================================================================== | |
| * Compress input to output then close both files. | |
| */ | |
| void gz_compress(in, out) | |
| FILE *in; | |
| gzFile out; | |
| { | |
| local char buf[BUFLEN]; | |
| int len; | |
| int err; | |
| #ifdef USE_MMAP | |
| /* Try first compressing with mmap. If mmap fails (minigzip used in a | |
| * pipe), use the normal fread loop. | |
| */ | |
| if (gz_compress_mmap(in, out) == Z_OK) return; | |
| #endif | |
| for (;;) { | |
| len = (int)fread(buf, 1, sizeof(buf), in); | |
| if (ferror(in)) { | |
| perror("fread"); | |
| exit(1); | |
| } | |
| if (len == 0) break; | |
| if (gzwrite(out, buf, (unsigned)len) != len) error(gzerror(out, &err)); | |
| } | |
| fclose(in); | |
| if (gzclose(out) != Z_OK) error("failed gzclose"); | |
| } | |
| #ifdef USE_MMAP /* MMAP version, Miguel Albrecht <malbrech@eso.org> */ | |
| /* Try compressing the input file at once using mmap. Return Z_OK if | |
| * if success, Z_ERRNO otherwise. | |
| */ | |
| int gz_compress_mmap(in, out) | |
| FILE *in; | |
| gzFile out; | |
| { | |
| int len; | |
| int err; | |
| int ifd = fileno(in); | |
| caddr_t buf; /* mmap'ed buffer for the entire input file */ | |
| off_t buf_len; /* length of the input file */ | |
| struct stat sb; | |
| /* Determine the size of the file, needed for mmap: */ | |
| if (fstat(ifd, &sb) < 0) return Z_ERRNO; | |
| buf_len = sb.st_size; | |
| if (buf_len <= 0) return Z_ERRNO; | |
| /* Now do the actual mmap: */ | |
| buf = mmap((caddr_t) 0, buf_len, PROT_READ, MAP_SHARED, ifd, (off_t)0); | |
| if (buf == (caddr_t)(-1)) return Z_ERRNO; | |
| /* Compress the whole file at once: */ | |
| len = gzwrite(out, (char *)buf, (unsigned)buf_len); | |
| if (len != (int)buf_len) error(gzerror(out, &err)); | |
| munmap(buf, buf_len); | |
| fclose(in); | |
| if (gzclose(out) != Z_OK) error("failed gzclose"); | |
| return Z_OK; | |
| } | |
| #endif /* USE_MMAP */ | |
| /* =========================================================================== | |
| * Uncompress input to output then close both files. | |
| */ | |
| void gz_uncompress(in, out) | |
| gzFile in; | |
| FILE *out; | |
| { | |
| local char buf[BUFLEN]; | |
| int len; | |
| int err; | |
| for (;;) { | |
| len = gzread(in, buf, sizeof(buf)); | |
| if (len < 0) error (gzerror(in, &err)); | |
| if (len == 0) break; | |
| if ((int)fwrite(buf, 1, (unsigned)len, out) != len) { | |
| error("failed fwrite"); | |
| } | |
| } | |
| if (fclose(out)) error("failed fclose"); | |
| if (gzclose(in) != Z_OK) error("failed gzclose"); | |
| } | |
| /* =========================================================================== | |
| * Compress the given file: create a corresponding .gz file and remove the | |
| * original. | |
| */ | |
| void file_compress(file, mode) | |
| char *file; | |
| char *mode; | |
| { | |
| local char outfile[MAX_NAME_LEN]; | |
| FILE *in; | |
| gzFile out; | |
| if (strlen(file) + strlen(GZ_SUFFIX) >= sizeof(outfile)) { | |
| fprintf(stderr, "%s: filename too long\n", prog); | |
| exit(1); | |
| } | |
| #if !defined(NO_snprintf) && !defined(NO_vsnprintf) | |
| snprintf(outfile, sizeof(outfile), "%s%s", file, GZ_SUFFIX); | |
| #else | |
| strcpy(outfile, file); | |
| strcat(outfile, GZ_SUFFIX); | |
| #endif | |
| in = fopen(file, "rb"); | |
| if (in == NULL) { | |
| perror(file); | |
| exit(1); | |
| } | |
| out = gzopen(outfile, mode); | |
| if (out == NULL) { | |
| fprintf(stderr, "%s: can't gzopen %s\n", prog, outfile); | |
| exit(1); | |
| } | |
| gz_compress(in, out); | |
| unlink(file); | |
| } | |
| /* =========================================================================== | |
| * Uncompress the given file and remove the original. | |
| */ | |
| void file_uncompress(file) | |
| char *file; | |
| { | |
| local char buf[MAX_NAME_LEN]; | |
| char *infile, *outfile; | |
| FILE *out; | |
| gzFile in; | |
| size_t len = strlen(file); | |
| if (len + strlen(GZ_SUFFIX) >= sizeof(buf)) { | |
| fprintf(stderr, "%s: filename too long\n", prog); | |
| exit(1); | |
| } | |
| #if !defined(NO_snprintf) && !defined(NO_vsnprintf) | |
| snprintf(buf, sizeof(buf), "%s", file); | |
| #else | |
| strcpy(buf, file); | |
| #endif | |
| if (len > SUFFIX_LEN && strcmp(file+len-SUFFIX_LEN, GZ_SUFFIX) == 0) { | |
| infile = file; | |
| outfile = buf; | |
| outfile[len-3] = '\0'; | |
| } else { | |
| outfile = file; | |
| infile = buf; | |
| #if !defined(NO_snprintf) && !defined(NO_vsnprintf) | |
| snprintf(buf + len, sizeof(buf) - len, "%s", GZ_SUFFIX); | |
| #else | |
| strcat(infile, GZ_SUFFIX); | |
| #endif | |
| } | |
| in = gzopen(infile, "rb"); | |
| if (in == NULL) { | |
| fprintf(stderr, "%s: can't gzopen %s\n", prog, infile); | |
| exit(1); | |
| } | |
| out = fopen(outfile, "wb"); | |
| if (out == NULL) { | |
| perror(file); | |
| exit(1); | |
| } | |
| gz_uncompress(in, out); | |
| unlink(infile); | |
| } | |
| /* =========================================================================== | |
| * Usage: minigzip [-c] [-d] [-f] [-h] [-r] [-1 to -9] [files...] | |
| * -c : write to standard output | |
| * -d : decompress | |
| * -f : compress with Z_FILTERED | |
| * -h : compress with Z_HUFFMAN_ONLY | |
| * -r : compress with Z_RLE | |
| * -1 to -9 : compression level | |
| */ | |
| int main(argc, argv) | |
| int argc; | |
| char *argv[]; | |
| { | |
| int copyout = 0; | |
| int uncompr = 0; | |
| gzFile file; | |
| char *bname, outmode[20]; | |
| #if !defined(NO_snprintf) && !defined(NO_vsnprintf) | |
| snprintf(outmode, sizeof(outmode), "%s", "wb6 "); | |
| #else | |
| strcpy(outmode, "wb6 "); | |
| #endif | |
| prog = argv[0]; | |
| bname = strrchr(argv[0], '/'); | |
| if (bname) | |
| bname++; | |
| else | |
| bname = argv[0]; | |
| argc--, argv++; | |
| if (!strcmp(bname, "gunzip")) | |
| uncompr = 1; | |
| else if (!strcmp(bname, "zcat")) | |
| copyout = uncompr = 1; | |
| while (argc > 0) { | |
| if (strcmp(*argv, "-c") == 0) | |
| copyout = 1; | |
| else if (strcmp(*argv, "-d") == 0) | |
| uncompr = 1; | |
| else if (strcmp(*argv, "-f") == 0) | |
| outmode[3] = 'f'; | |
| else if (strcmp(*argv, "-h") == 0) | |
| outmode[3] = 'h'; | |
| else if (strcmp(*argv, "-r") == 0) | |
| outmode[3] = 'R'; | |
| else if ((*argv)[0] == '-' && (*argv)[1] >= '1' && (*argv)[1] <= '9' && | |
| (*argv)[2] == 0) | |
| outmode[2] = (*argv)[1]; | |
| else | |
| break; | |
| argc--, argv++; | |
| } | |
| if (outmode[3] == ' ') | |
| outmode[3] = 0; | |
| if (argc == 0) { | |
| SET_BINARY_MODE(stdin); | |
| SET_BINARY_MODE(stdout); | |
| if (uncompr) { | |
| file = gzdopen(fileno(stdin), "rb"); | |
| if (file == NULL) error("can't gzdopen stdin"); | |
| gz_uncompress(file, stdout); | |
| } else { | |
| file = gzdopen(fileno(stdout), outmode); | |
| if (file == NULL) error("can't gzdopen stdout"); | |
| gz_compress(stdin, file); | |
| } | |
| } else { | |
| if (copyout) { | |
| SET_BINARY_MODE(stdout); | |
| } | |
| do { | |
| if (uncompr) { | |
| if (copyout) { | |
| file = gzopen(*argv, "rb"); | |
| if (file == NULL) | |
| fprintf(stderr, "%s: can't gzopen %s\n", prog, *argv); | |
| else | |
| gz_uncompress(file, stdout); | |
| } else { | |
| file_uncompress(*argv); | |
| } | |
| } else { | |
| if (copyout) { | |
| FILE * in = fopen(*argv, "rb"); | |
| if (in == NULL) { | |
| perror(*argv); | |
| } else { | |
| file = gzdopen(fileno(stdout), outmode); | |
| if (file == NULL) error("can't gzdopen stdout"); | |
| gz_compress(in, file); | |
| } | |
| } else { | |
| file_compress(*argv, outmode); | |
| } | |
| } | |
| } while (argv++, --argc); | |
| } | |
| return 0; | |
| } |