| /**@file | |
| Copyright (c) 2006, Intel Corporation | |
| All rights reserved. This program and the accompanying materials | |
| are licensed and made available under the terms and conditions of the BSD License | |
| which accompanies this distribution. The full text of the license may be found at | |
| http://opensource.org/licenses/bsd-license.php | |
| THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
| WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
| **/ | |
| #include "pcibus.h" | |
| #include "PciEnumeratorSupport.h" | |
| #include "PciCommand.h" | |
| #include "PciIo.h" | |
| EFI_STATUS | |
| PciDevicePresent ( | |
| IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *PciRootBridgeIo, | |
| PCI_TYPE00 *Pci, | |
| UINT8 Bus, | |
| UINT8 Device, | |
| UINT8 Func | |
| ) | |
| /*++ | |
| Routine Description: | |
| This routine is used to check whether the pci device is present | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: PciRootBridgeIo - add argument and description to function comment | |
| // TODO: Pci - add argument and description to function comment | |
| // TODO: Bus - add argument and description to function comment | |
| // TODO: Device - add argument and description to function comment | |
| // TODO: Func - add argument and description to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| // TODO: EFI_NOT_FOUND - add return value to function comment | |
| { | |
| UINT64 Address; | |
| EFI_STATUS Status; | |
| // | |
| // Create PCI address map in terms of Bus, Device and Func | |
| // | |
| Address = EFI_PCI_ADDRESS (Bus, Device, Func, 0); | |
| // | |
| // Read the Vendor Id register | |
| // | |
| Status = PciRootBridgeIoRead ( | |
| PciRootBridgeIo, | |
| NULL, | |
| EfiPciWidthUint32, | |
| Address, | |
| 1, | |
| Pci | |
| ); | |
| if (!EFI_ERROR (Status) && (Pci->Hdr).VendorId != 0xffff) { | |
| // | |
| // Read the entire config header for the device | |
| // | |
| Status = PciRootBridgeIoRead ( | |
| PciRootBridgeIo, | |
| NULL, | |
| EfiPciWidthUint32, | |
| Address, | |
| sizeof (PCI_TYPE00) / sizeof (UINT32), | |
| Pci | |
| ); | |
| return EFI_SUCCESS; | |
| } | |
| return EFI_NOT_FOUND; | |
| } | |
| EFI_STATUS | |
| PciPciDeviceInfoCollector ( | |
| IN PCI_IO_DEVICE *Bridge, | |
| UINT8 StartBusNumber | |
| ) | |
| /*++ | |
| Routine Description: | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: Bridge - add argument and description to function comment | |
| // TODO: StartBusNumber - add argument and description to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| { | |
| EFI_STATUS Status; | |
| PCI_TYPE00 Pci; | |
| UINT8 Device; | |
| UINT8 Func; | |
| UINT8 SecBus; | |
| PCI_IO_DEVICE *PciIoDevice; | |
| EFI_PCI_IO_PROTOCOL *PciIo; | |
| Status = EFI_SUCCESS; | |
| SecBus = 0; | |
| for (Device = 0; Device <= PCI_MAX_DEVICE; Device++) { | |
| for (Func = 0; Func <= PCI_MAX_FUNC; Func++) { | |
| // | |
| // Check to see whether PCI device is present | |
| // | |
| Status = PciDevicePresent ( | |
| Bridge->PciRootBridgeIo, | |
| &Pci, | |
| (UINT8) StartBusNumber, | |
| (UINT8) Device, | |
| (UINT8) Func | |
| ); | |
| if (!EFI_ERROR (Status)) { | |
| // | |
| // Call back to host bridge function | |
| // | |
| PreprocessController (Bridge, (UINT8) StartBusNumber, Device, Func, EfiPciBeforeResourceCollection); | |
| // | |
| // Collect all the information about the PCI device discovered | |
| // | |
| Status = PciSearchDevice ( | |
| Bridge, | |
| &Pci, | |
| (UINT8) StartBusNumber, | |
| Device, | |
| Func, | |
| &PciIoDevice | |
| ); | |
| // | |
| // Recursively scan PCI busses on the other side of PCI-PCI bridges | |
| // | |
| // | |
| if (!EFI_ERROR (Status) && (IS_PCI_BRIDGE (&Pci) || IS_CARDBUS_BRIDGE (&Pci))) { | |
| // | |
| // If it is PPB, we need to get the secondary bus to continue the enumeration | |
| // | |
| PciIo = &(PciIoDevice->PciIo); | |
| Status = PciIoRead (PciIo, EfiPciIoWidthUint8, 0x19, 1, &SecBus); | |
| if (EFI_ERROR (Status)) { | |
| return Status; | |
| } | |
| // | |
| // Get resource padding for PPB | |
| // | |
| GetResourcePaddingPpb (PciIoDevice); | |
| // | |
| // Deep enumerate the next level bus | |
| // | |
| Status = PciPciDeviceInfoCollector ( | |
| PciIoDevice, | |
| (UINT8) (SecBus) | |
| ); | |
| } | |
| if (Func == 0 && !IS_PCI_MULTI_FUNC (&Pci)) { | |
| // | |
| // Skip sub functions, this is not a multi function device | |
| // | |
| Func = PCI_MAX_FUNC; | |
| } | |
| } | |
| } | |
| } | |
| return EFI_SUCCESS; | |
| } | |
| EFI_STATUS | |
| PciSearchDevice ( | |
| IN PCI_IO_DEVICE *Bridge, | |
| IN PCI_TYPE00 *Pci, | |
| IN UINT8 Bus, | |
| IN UINT8 Device, | |
| IN UINT8 Func, | |
| OUT PCI_IO_DEVICE **PciDevice | |
| ) | |
| /*++ | |
| Routine Description: | |
| Search required device. | |
| Arguments: | |
| Bridge - A pointer to the PCI_IO_DEVICE. | |
| Pci - A pointer to the PCI_TYPE00. | |
| Bus - Bus number. | |
| Device - Device number. | |
| Func - Function number. | |
| PciDevice - The Required pci device. | |
| Returns: | |
| Status code. | |
| --*/ | |
| // TODO: EFI_OUT_OF_RESOURCES - add return value to function comment | |
| // TODO: EFI_OUT_OF_RESOURCES - add return value to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| { | |
| PCI_IO_DEVICE *PciIoDevice; | |
| PciIoDevice = NULL; | |
| if (!IS_PCI_BRIDGE (Pci)) { | |
| if (IS_CARDBUS_BRIDGE (Pci)) { | |
| PciIoDevice = GatherP2CInfo ( | |
| Bridge, | |
| Pci, | |
| Bus, | |
| Device, | |
| Func | |
| ); | |
| if ((PciIoDevice != NULL) && gFullEnumeration) { | |
| InitializeP2C (PciIoDevice); | |
| } | |
| } else { | |
| // | |
| // Create private data for Pci Device | |
| // | |
| PciIoDevice = GatherDeviceInfo ( | |
| Bridge, | |
| Pci, | |
| Bus, | |
| Device, | |
| Func | |
| ); | |
| } | |
| } else { | |
| // | |
| // Create private data for PPB | |
| // | |
| PciIoDevice = GatherPpbInfo ( | |
| Bridge, | |
| Pci, | |
| Bus, | |
| Device, | |
| Func | |
| ); | |
| // | |
| // Special initialization for PPB including making the PPB quiet | |
| // | |
| if ((PciIoDevice != NULL) && gFullEnumeration) { | |
| InitializePpb (PciIoDevice); | |
| } | |
| } | |
| if (!PciIoDevice) { | |
| return EFI_OUT_OF_RESOURCES; | |
| } | |
| // | |
| // Update the bar information for this PCI device so as to support some specific device | |
| // | |
| if (PcdGet8 (PcdPciIncompatibleDeviceSupportMask) & PCI_INCOMPATIBLE_ACPI_RESOURCE_SUPPORT) { | |
| UpdatePciInfo (PciIoDevice); | |
| } | |
| if (PciIoDevice->DevicePath == NULL) { | |
| return EFI_OUT_OF_RESOURCES; | |
| } | |
| // | |
| // Detect this function has option rom | |
| // | |
| if (gFullEnumeration) { | |
| if (!IS_CARDBUS_BRIDGE (Pci)) { | |
| GetOpRomInfo (PciIoDevice); | |
| } | |
| ResetPowerManagementFeature (PciIoDevice); | |
| } | |
| // | |
| // Insert it into a global tree for future reference | |
| // | |
| InsertPciDevice (Bridge, PciIoDevice); | |
| // | |
| // Determine PCI device attributes | |
| // | |
| if (PciDevice != NULL) { | |
| *PciDevice = PciIoDevice; | |
| } | |
| return EFI_SUCCESS; | |
| } | |
| PCI_IO_DEVICE * | |
| GatherDeviceInfo ( | |
| IN PCI_IO_DEVICE *Bridge, | |
| IN PCI_TYPE00 *Pci, | |
| UINT8 Bus, | |
| UINT8 Device, | |
| UINT8 Func | |
| ) | |
| /*++ | |
| Routine Description: | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: Bridge - add argument and description to function comment | |
| // TODO: Pci - add argument and description to function comment | |
| // TODO: Bus - add argument and description to function comment | |
| // TODO: Device - add argument and description to function comment | |
| // TODO: Func - add argument and description to function comment | |
| { | |
| UINTN Offset; | |
| UINTN BarIndex; | |
| PCI_IO_DEVICE *PciIoDevice; | |
| EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *PciRootBridgeIo; | |
| PciRootBridgeIo = Bridge->PciRootBridgeIo; | |
| PciIoDevice = CreatePciIoDevice ( | |
| PciRootBridgeIo, | |
| Pci, | |
| Bus, | |
| Device, | |
| Func | |
| ); | |
| if (!PciIoDevice) { | |
| return NULL; | |
| } | |
| // | |
| // Create a device path for this PCI device and store it into its private data | |
| // | |
| CreatePciDevicePath ( | |
| Bridge->DevicePath, | |
| PciIoDevice | |
| ); | |
| // | |
| // If it is a full enumeration, disconnect the device in advance | |
| // | |
| if (gFullEnumeration) { | |
| PciDisableCommandRegister (PciIoDevice, EFI_PCI_COMMAND_BITS_OWNED); | |
| } | |
| // | |
| // Start to parse the bars | |
| // | |
| for (Offset = 0x10, BarIndex = 0; Offset <= 0x24; BarIndex++) { | |
| Offset = PciParseBar (PciIoDevice, Offset, BarIndex); | |
| } | |
| return PciIoDevice; | |
| } | |
| PCI_IO_DEVICE * | |
| GatherPpbInfo ( | |
| IN PCI_IO_DEVICE *Bridge, | |
| IN PCI_TYPE00 *Pci, | |
| UINT8 Bus, | |
| UINT8 Device, | |
| UINT8 Func | |
| ) | |
| /*++ | |
| Routine Description: | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: Bridge - add argument and description to function comment | |
| // TODO: Pci - add argument and description to function comment | |
| // TODO: Bus - add argument and description to function comment | |
| // TODO: Device - add argument and description to function comment | |
| // TODO: Func - add argument and description to function comment | |
| { | |
| EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *PciRootBridgeIo; | |
| PCI_IO_DEVICE *PciIoDevice; | |
| EFI_STATUS Status; | |
| UINT32 Value; | |
| EFI_PCI_IO_PROTOCOL *PciIo; | |
| UINT8 Temp; | |
| PciRootBridgeIo = Bridge->PciRootBridgeIo; | |
| PciIoDevice = CreatePciIoDevice ( | |
| PciRootBridgeIo, | |
| Pci, | |
| Bus, | |
| Device, | |
| Func | |
| ); | |
| if (!PciIoDevice) { | |
| return NULL; | |
| } | |
| // | |
| // Create a device path for this PCI device and store it into its private data | |
| // | |
| CreatePciDevicePath ( | |
| Bridge->DevicePath, | |
| PciIoDevice | |
| ); | |
| if (gFullEnumeration) { | |
| PciDisableCommandRegister (PciIoDevice, EFI_PCI_COMMAND_BITS_OWNED); | |
| // | |
| // Initalize the bridge control register | |
| // | |
| PciDisableBridgeControlRegister (PciIoDevice, EFI_PCI_BRIDGE_CONTROL_BITS_OWNED); | |
| } | |
| // | |
| // PPB can have two BARs | |
| // | |
| if (PciParseBar (PciIoDevice, 0x10, PPB_BAR_0) == 0x14) { | |
| // | |
| // Not 64-bit bar | |
| // | |
| PciParseBar (PciIoDevice, 0x14, PPB_BAR_1); | |
| } | |
| PciIo = &PciIoDevice->PciIo; | |
| // | |
| // Test whether it support 32 decode or not | |
| // | |
| PciIoRead (PciIo, EfiPciIoWidthUint8, 0x1C, 1, &Temp); | |
| PciIoWrite (PciIo, EfiPciIoWidthUint8, 0x1C, 1, &gAllOne); | |
| PciIoRead (PciIo, EfiPciIoWidthUint8, 0x1C, 1, &Value); | |
| PciIoWrite (PciIo, EfiPciIoWidthUint8, 0x1C, 1, &Temp); | |
| if (Value) { | |
| if (Value & 0x01) { | |
| PciIoDevice->Decodes |= EFI_BRIDGE_IO32_DECODE_SUPPORTED; | |
| } else { | |
| PciIoDevice->Decodes |= EFI_BRIDGE_IO16_DECODE_SUPPORTED; | |
| } | |
| } | |
| Status = BarExisted ( | |
| PciIoDevice, | |
| 0x24, | |
| NULL, | |
| NULL | |
| ); | |
| // | |
| // test if it supports 64 memory or not | |
| // | |
| if (!EFI_ERROR (Status)) { | |
| Status = BarExisted ( | |
| PciIoDevice, | |
| 0x28, | |
| NULL, | |
| NULL | |
| ); | |
| if (!EFI_ERROR (Status)) { | |
| PciIoDevice->Decodes |= EFI_BRIDGE_PMEM32_DECODE_SUPPORTED; | |
| PciIoDevice->Decodes |= EFI_BRIDGE_PMEM64_DECODE_SUPPORTED; | |
| } else { | |
| PciIoDevice->Decodes |= EFI_BRIDGE_PMEM32_DECODE_SUPPORTED; | |
| } | |
| } | |
| // | |
| // Memory 32 code is required for ppb | |
| // | |
| PciIoDevice->Decodes |= EFI_BRIDGE_MEM32_DECODE_SUPPORTED; | |
| GetResourcePaddingPpb (PciIoDevice); | |
| return PciIoDevice; | |
| } | |
| PCI_IO_DEVICE * | |
| GatherP2CInfo ( | |
| IN PCI_IO_DEVICE *Bridge, | |
| IN PCI_TYPE00 *Pci, | |
| UINT8 Bus, | |
| UINT8 Device, | |
| UINT8 Func | |
| ) | |
| /*++ | |
| Routine Description: | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: Bridge - add argument and description to function comment | |
| // TODO: Pci - add argument and description to function comment | |
| // TODO: Bus - add argument and description to function comment | |
| // TODO: Device - add argument and description to function comment | |
| // TODO: Func - add argument and description to function comment | |
| { | |
| EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *PciRootBridgeIo; | |
| PCI_IO_DEVICE *PciIoDevice; | |
| PciRootBridgeIo = Bridge->PciRootBridgeIo; | |
| PciIoDevice = CreatePciIoDevice ( | |
| PciRootBridgeIo, | |
| Pci, | |
| Bus, | |
| Device, | |
| Func | |
| ); | |
| if (!PciIoDevice) { | |
| return NULL; | |
| } | |
| // | |
| // Create a device path for this PCI device and store it into its private data | |
| // | |
| CreatePciDevicePath ( | |
| Bridge->DevicePath, | |
| PciIoDevice | |
| ); | |
| if (gFullEnumeration) { | |
| PciDisableCommandRegister (PciIoDevice, EFI_PCI_COMMAND_BITS_OWNED); | |
| // | |
| // Initalize the bridge control register | |
| // | |
| PciDisableBridgeControlRegister (PciIoDevice, EFI_PCCARD_BRIDGE_CONTROL_BITS_OWNED); | |
| } | |
| // | |
| // P2C only has one bar that is in 0x10 | |
| // | |
| PciParseBar (PciIoDevice, 0x10, P2C_BAR_0); | |
| // | |
| // Read PciBar information from the bar register | |
| // | |
| GetBackPcCardBar (PciIoDevice); | |
| PciIoDevice->Decodes = EFI_BRIDGE_MEM32_DECODE_SUPPORTED | | |
| EFI_BRIDGE_PMEM32_DECODE_SUPPORTED | | |
| EFI_BRIDGE_IO32_DECODE_SUPPORTED; | |
| return PciIoDevice; | |
| } | |
| EFI_DEVICE_PATH_PROTOCOL * | |
| CreatePciDevicePath ( | |
| IN EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath, | |
| IN PCI_IO_DEVICE *PciIoDevice | |
| ) | |
| /*++ | |
| Routine Description: | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: ParentDevicePath - add argument and description to function comment | |
| // TODO: PciIoDevice - add argument and description to function comment | |
| { | |
| PCI_DEVICE_PATH PciNode; | |
| // | |
| // Create PCI device path | |
| // | |
| PciNode.Header.Type = HARDWARE_DEVICE_PATH; | |
| PciNode.Header.SubType = HW_PCI_DP; | |
| SetDevicePathNodeLength (&PciNode.Header, sizeof (PciNode)); | |
| PciNode.Device = PciIoDevice->DeviceNumber; | |
| PciNode.Function = PciIoDevice->FunctionNumber; | |
| PciIoDevice->DevicePath = AppendDevicePathNode (ParentDevicePath, &PciNode.Header); | |
| return PciIoDevice->DevicePath; | |
| } | |
| EFI_STATUS | |
| BarExisted ( | |
| IN PCI_IO_DEVICE *PciIoDevice, | |
| IN UINTN Offset, | |
| OUT UINT32 *BarLengthValue, | |
| OUT UINT32 *OriginalBarValue | |
| ) | |
| /*++ | |
| Routine Description: | |
| Check the bar is existed or not. | |
| Arguments: | |
| PciIoDevice - A pointer to the PCI_IO_DEVICE. | |
| Offset - The offset. | |
| BarLengthValue - The bar length value. | |
| OriginalBarValue - The original bar value. | |
| Returns: | |
| EFI_NOT_FOUND - The bar don't exist. | |
| EFI_SUCCESS - The bar exist. | |
| --*/ | |
| { | |
| EFI_PCI_IO_PROTOCOL *PciIo; | |
| UINT32 OriginalValue; | |
| UINT32 Value; | |
| EFI_TPL OldTpl; | |
| PciIo = &PciIoDevice->PciIo; | |
| // | |
| // Preserve the original value | |
| // | |
| PciIoRead (PciIo, EfiPciIoWidthUint32, (UINT8) Offset, 1, &OriginalValue); | |
| // | |
| // Raise TPL to high level to disable timer interrupt while the BAR is probed | |
| // | |
| OldTpl = gBS->RaiseTPL (TPL_HIGH_LEVEL); | |
| PciIoWrite (PciIo, EfiPciIoWidthUint32, (UINT8) Offset, 1, &gAllOne); | |
| PciIoRead (PciIo, EfiPciIoWidthUint32, (UINT8) Offset, 1, &Value); | |
| // | |
| // Write back the original value | |
| // | |
| PciIoWrite (PciIo, EfiPciIoWidthUint32, (UINT8) Offset, 1, &OriginalValue); | |
| // | |
| // Restore TPL to its original level | |
| // | |
| gBS->RestoreTPL (OldTpl); | |
| if (BarLengthValue != NULL) { | |
| *BarLengthValue = Value; | |
| } | |
| if (OriginalBarValue != NULL) { | |
| *OriginalBarValue = OriginalValue; | |
| } | |
| if (Value == 0) { | |
| return EFI_NOT_FOUND; | |
| } else { | |
| return EFI_SUCCESS; | |
| } | |
| } | |
| EFI_STATUS | |
| PciTestSupportedAttribute ( | |
| IN PCI_IO_DEVICE *PciIoDevice, | |
| IN UINT16 *Command, | |
| IN UINT16 *BridgeControl, | |
| IN UINT16 *OldCommand, | |
| IN UINT16 *OldBridgeControl | |
| ) | |
| /*++ | |
| Routine Description: | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: PciIoDevice - add argument and description to function comment | |
| // TODO: Command - add argument and description to function comment | |
| // TODO: BridgeControl - add argument and description to function comment | |
| // TODO: OldCommand - add argument and description to function comment | |
| // TODO: OldBridgeControl - add argument and description to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| { | |
| EFI_TPL OldTpl; | |
| // | |
| // Preserve the original value | |
| // | |
| PciReadCommandRegister (PciIoDevice, OldCommand); | |
| // | |
| // Raise TPL to high level to disable timer interrupt while the BAR is probed | |
| // | |
| OldTpl = gBS->RaiseTPL (TPL_HIGH_LEVEL); | |
| PciSetCommandRegister (PciIoDevice, *Command); | |
| PciReadCommandRegister (PciIoDevice, Command); | |
| // | |
| // Write back the original value | |
| // | |
| PciSetCommandRegister (PciIoDevice, *OldCommand); | |
| // | |
| // Restore TPL to its original level | |
| // | |
| gBS->RestoreTPL (OldTpl); | |
| if (IS_PCI_BRIDGE (&PciIoDevice->Pci) || IS_CARDBUS_BRIDGE (&PciIoDevice->Pci)) { | |
| // | |
| // Preserve the original value | |
| // | |
| PciReadBridgeControlRegister (PciIoDevice, OldBridgeControl); | |
| // | |
| // Raise TPL to high level to disable timer interrupt while the BAR is probed | |
| // | |
| OldTpl = gBS->RaiseTPL (TPL_HIGH_LEVEL); | |
| PciSetBridgeControlRegister (PciIoDevice, *BridgeControl); | |
| PciReadBridgeControlRegister (PciIoDevice, BridgeControl); | |
| // | |
| // Write back the original value | |
| // | |
| PciSetBridgeControlRegister (PciIoDevice, *OldBridgeControl); | |
| // | |
| // Restore TPL to its original level | |
| // | |
| gBS->RestoreTPL (OldTpl); | |
| } else { | |
| *OldBridgeControl = 0; | |
| *BridgeControl = 0; | |
| } | |
| return EFI_SUCCESS; | |
| } | |
| EFI_STATUS | |
| PciSetDeviceAttribute ( | |
| IN PCI_IO_DEVICE *PciIoDevice, | |
| IN UINT16 Command, | |
| IN UINT16 BridgeControl, | |
| IN UINTN Option | |
| ) | |
| /*++ | |
| Routine Description: | |
| Set the supported or current attributes of a PCI device | |
| Arguments: | |
| PciIoDevice - Structure pointer for PCI device. | |
| Command - Command register value. | |
| BridgeControl - Bridge control value for PPB or P2C. | |
| Option - Make a choice of EFI_SET_SUPPORTS or EFI_SET_ATTRIBUTES. | |
| Returns: | |
| --*/ | |
| /*++ | |
| Routine Description: | |
| Arguments: | |
| Returns: | |
| EFI_SUCCESS Always success | |
| --*/ | |
| { | |
| UINT64 Attributes; | |
| Attributes = 0; | |
| if (Command & EFI_PCI_COMMAND_IO_SPACE) { | |
| Attributes |= EFI_PCI_IO_ATTRIBUTE_IO; | |
| } | |
| if (Command & EFI_PCI_COMMAND_MEMORY_SPACE) { | |
| Attributes |= EFI_PCI_IO_ATTRIBUTE_MEMORY; | |
| } | |
| if (Command & EFI_PCI_COMMAND_BUS_MASTER) { | |
| Attributes |= EFI_PCI_IO_ATTRIBUTE_BUS_MASTER; | |
| } | |
| if (Command & EFI_PCI_COMMAND_VGA_PALETTE_SNOOP) { | |
| Attributes |= EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO; | |
| } | |
| if (BridgeControl & EFI_PCI_BRIDGE_CONTROL_ISA) { | |
| Attributes |= EFI_PCI_IO_ATTRIBUTE_ISA_IO; | |
| } | |
| if (BridgeControl & EFI_PCI_BRIDGE_CONTROL_VGA) { | |
| Attributes |= EFI_PCI_IO_ATTRIBUTE_VGA_IO; | |
| Attributes |= EFI_PCI_IO_ATTRIBUTE_VGA_MEMORY; | |
| Attributes |= EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO; | |
| } | |
| if (BridgeControl & EFI_PCI_BRIDGE_CONTROL_VGA_16) { | |
| Attributes |= EFI_PCI_IO_ATTRIBUTE_VGA_IO_16; | |
| Attributes |= EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO_16; | |
| } | |
| if (Option == EFI_SET_SUPPORTS) { | |
| Attributes |= EFI_PCI_IO_ATTRIBUTE_MEMORY_WRITE_COMBINE | | |
| EFI_PCI_IO_ATTRIBUTE_MEMORY_CACHED | | |
| EFI_PCI_IO_ATTRIBUTE_MEMORY_DISABLE | | |
| EFI_PCI_IO_ATTRIBUTE_EMBEDDED_DEVICE | | |
| EFI_PCI_IO_ATTRIBUTE_EMBEDDED_ROM | | |
| EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE; | |
| if (Attributes & EFI_PCI_IO_ATTRIBUTE_IO) { | |
| Attributes |= EFI_PCI_IO_ATTRIBUTE_ISA_MOTHERBOARD_IO; | |
| Attributes |= EFI_PCI_IO_ATTRIBUTE_ISA_IO; | |
| } | |
| if (IS_PCI_BRIDGE (&PciIoDevice->Pci) || IS_CARDBUS_BRIDGE (&PciIoDevice->Pci)) { | |
| // | |
| // For bridge, it should support IDE attributes | |
| // | |
| Attributes |= EFI_PCI_IO_ATTRIBUTE_IDE_SECONDARY_IO; | |
| Attributes |= EFI_PCI_IO_ATTRIBUTE_IDE_PRIMARY_IO; | |
| } else { | |
| if (IS_PCI_IDE (&PciIoDevice->Pci)) { | |
| Attributes |= EFI_PCI_IO_ATTRIBUTE_IDE_SECONDARY_IO; | |
| Attributes |= EFI_PCI_IO_ATTRIBUTE_IDE_PRIMARY_IO; | |
| } | |
| if (IS_PCI_VGA (&PciIoDevice->Pci)) { | |
| Attributes |= EFI_PCI_IO_ATTRIBUTE_VGA_MEMORY; | |
| Attributes |= EFI_PCI_IO_ATTRIBUTE_VGA_IO; | |
| } | |
| } | |
| PciIoDevice->Supports = Attributes; | |
| PciIoDevice->Supports &= ( (PciIoDevice->Parent->Supports) | \ | |
| EFI_PCI_IO_ATTRIBUTE_IO | EFI_PCI_IO_ATTRIBUTE_MEMORY | \ | |
| EFI_PCI_IO_ATTRIBUTE_BUS_MASTER ); | |
| } else { | |
| PciIoDevice->Attributes = Attributes; | |
| } | |
| return EFI_SUCCESS; | |
| } | |
| EFI_STATUS | |
| GetFastBackToBackSupport ( | |
| IN PCI_IO_DEVICE *PciIoDevice, | |
| IN UINT8 StatusIndex | |
| ) | |
| /*++ | |
| Routine Description: | |
| Determine if the device can support Fast Back to Back attribute | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: PciIoDevice - add argument and description to function comment | |
| // TODO: StatusIndex - add argument and description to function comment | |
| // TODO: EFI_UNSUPPORTED - add return value to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| // TODO: EFI_UNSUPPORTED - add return value to function comment | |
| { | |
| EFI_PCI_IO_PROTOCOL *PciIo; | |
| EFI_STATUS Status; | |
| UINT32 StatusRegister; | |
| // | |
| // Read the status register | |
| // | |
| PciIo = &PciIoDevice->PciIo; | |
| Status = PciIoRead (PciIo, EfiPciIoWidthUint16, StatusIndex, 1, &StatusRegister); | |
| if (EFI_ERROR (Status)) { | |
| return EFI_UNSUPPORTED; | |
| } | |
| // | |
| // Check the Fast B2B bit | |
| // | |
| if (StatusRegister & EFI_PCI_FAST_BACK_TO_BACK_CAPABLE) { | |
| return EFI_SUCCESS; | |
| } else { | |
| return EFI_UNSUPPORTED; | |
| } | |
| } | |
| STATIC | |
| EFI_STATUS | |
| ProcessOptionRomLight ( | |
| IN PCI_IO_DEVICE *PciIoDevice | |
| ) | |
| /*++ | |
| Routine Description: | |
| Process the option ROM for all the children of the specified parent PCI device. | |
| It can only be used after the first full Option ROM process. | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: PciIoDevice - add argument and description to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| { | |
| PCI_IO_DEVICE *Temp; | |
| LIST_ENTRY *CurrentLink; | |
| // | |
| // For RootBridge, PPB , P2C, go recursively to traverse all its children | |
| // | |
| CurrentLink = PciIoDevice->ChildList.ForwardLink; | |
| while (CurrentLink && CurrentLink != &PciIoDevice->ChildList) { | |
| Temp = PCI_IO_DEVICE_FROM_LINK (CurrentLink); | |
| if (!IsListEmpty (&Temp->ChildList)) { | |
| ProcessOptionRomLight (Temp); | |
| } | |
| PciRomGetImageMapping (Temp); | |
| CurrentLink = CurrentLink->ForwardLink; | |
| } | |
| return EFI_SUCCESS; | |
| } | |
| EFI_STATUS | |
| DetermineDeviceAttribute ( | |
| IN PCI_IO_DEVICE *PciIoDevice | |
| ) | |
| /*++ | |
| Routine Description: | |
| Determine the related attributes of all devices under a Root Bridge | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: PciIoDevice - add argument and description to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| { | |
| UINT16 Command; | |
| UINT16 BridgeControl; | |
| UINT16 OldCommand; | |
| UINT16 OldBridgeControl; | |
| BOOLEAN FastB2BSupport; | |
| /* | |
| UINT8 IdePI; | |
| EFI_PCI_IO_PROTOCOL *PciIo; | |
| */ | |
| PCI_IO_DEVICE *Temp; | |
| LIST_ENTRY *CurrentLink; | |
| EFI_STATUS Status; | |
| // | |
| // For Root Bridge, just copy it by RootBridgeIo proctocol | |
| // so as to keep consistent with the actual attribute | |
| // | |
| if (!PciIoDevice->Parent) { | |
| Status = PciIoDevice->PciRootBridgeIo->GetAttributes ( | |
| PciIoDevice->PciRootBridgeIo, | |
| &PciIoDevice->Supports, | |
| &PciIoDevice->Attributes | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| return Status; | |
| } | |
| } else { | |
| // | |
| // Set the attributes to be checked for common PCI devices and PPB or P2C | |
| // Since some devices only support part of them, it is better to set the | |
| // attribute according to its command or bridge control register | |
| // | |
| Command = EFI_PCI_COMMAND_IO_SPACE | | |
| EFI_PCI_COMMAND_MEMORY_SPACE | | |
| EFI_PCI_COMMAND_BUS_MASTER | | |
| EFI_PCI_COMMAND_VGA_PALETTE_SNOOP; | |
| BridgeControl = EFI_PCI_BRIDGE_CONTROL_ISA | EFI_PCI_BRIDGE_CONTROL_VGA | EFI_PCI_BRIDGE_CONTROL_VGA_16; | |
| // | |
| // Test whether the device can support attributes above | |
| // | |
| PciTestSupportedAttribute (PciIoDevice, &Command, &BridgeControl, &OldCommand, &OldBridgeControl); | |
| // | |
| // Set the supported attributes for specified PCI device | |
| // | |
| PciSetDeviceAttribute (PciIoDevice, Command, BridgeControl, EFI_SET_SUPPORTS); | |
| // | |
| // Set the current attributes for specified PCI device | |
| // | |
| PciSetDeviceAttribute (PciIoDevice, OldCommand, OldBridgeControl, EFI_SET_ATTRIBUTES); | |
| // | |
| // Enable other supported attributes but not defined in PCI_IO_PROTOCOL | |
| // | |
| PciEnableCommandRegister (PciIoDevice, EFI_PCI_COMMAND_MEMORY_WRITE_AND_INVALIDATE); | |
| // | |
| // Enable IDE native mode | |
| // | |
| /* | |
| if (IS_PCI_IDE(&PciIoDevice->Pci)) { | |
| PciIo = &PciIoDevice->PciIo; | |
| PciIoRead ( | |
| PciIo, | |
| EfiPciIoWidthUint8, | |
| 0x09, | |
| 1, | |
| &IdePI | |
| ); | |
| // | |
| // Set native mode if it can be supported | |
| // | |
| IdePI |= (((IdePI & 0x0F) >> 1) & 0x05); | |
| PciIoWrite ( | |
| PciIo, | |
| EfiPciIoWidthUint8, | |
| 0x09, | |
| 1, | |
| &IdePI | |
| ); | |
| } | |
| */ | |
| } | |
| FastB2BSupport = TRUE; | |
| // | |
| // P2C can not support FB2B on the secondary side | |
| // | |
| if (IS_CARDBUS_BRIDGE (&PciIoDevice->Pci)) { | |
| FastB2BSupport = FALSE; | |
| } | |
| // | |
| // For RootBridge, PPB , P2C, go recursively to traverse all its children | |
| // | |
| CurrentLink = PciIoDevice->ChildList.ForwardLink; | |
| while (CurrentLink && CurrentLink != &PciIoDevice->ChildList) { | |
| Temp = PCI_IO_DEVICE_FROM_LINK (CurrentLink); | |
| Status = DetermineDeviceAttribute (Temp); | |
| if (EFI_ERROR (Status)) { | |
| return Status; | |
| } | |
| // | |
| // Detect Fast Bact to Bact support for the device under the bridge | |
| // | |
| Status = GetFastBackToBackSupport (Temp, PCI_PRIMARY_STATUS_OFFSET); | |
| if (FastB2BSupport && EFI_ERROR (Status)) { | |
| FastB2BSupport = FALSE; | |
| } | |
| CurrentLink = CurrentLink->ForwardLink; | |
| } | |
| // | |
| // Set or clear Fast Back to Back bit for the whole bridge | |
| // | |
| if (!IsListEmpty (&PciIoDevice->ChildList)) { | |
| if (IS_PCI_BRIDGE (&PciIoDevice->Pci)) { | |
| Status = GetFastBackToBackSupport (PciIoDevice, PCI_BRIDGE_STATUS_REGISTER_OFFSET); | |
| if (EFI_ERROR (Status) || (!FastB2BSupport)) { | |
| FastB2BSupport = FALSE; | |
| PciDisableBridgeControlRegister (PciIoDevice, EFI_PCI_BRIDGE_CONTROL_FAST_BACK_TO_BACK); | |
| } else { | |
| PciEnableBridgeControlRegister (PciIoDevice, EFI_PCI_BRIDGE_CONTROL_FAST_BACK_TO_BACK); | |
| } | |
| } | |
| CurrentLink = PciIoDevice->ChildList.ForwardLink; | |
| while (CurrentLink && CurrentLink != &PciIoDevice->ChildList) { | |
| Temp = PCI_IO_DEVICE_FROM_LINK (CurrentLink); | |
| if (FastB2BSupport) { | |
| PciEnableCommandRegister (Temp, EFI_PCI_COMMAND_FAST_BACK_TO_BACK); | |
| } else { | |
| PciDisableCommandRegister (Temp, EFI_PCI_COMMAND_FAST_BACK_TO_BACK); | |
| } | |
| CurrentLink = CurrentLink->ForwardLink; | |
| } | |
| } | |
| // | |
| // End for IsListEmpty | |
| // | |
| return EFI_SUCCESS; | |
| } | |
| EFI_STATUS | |
| UpdatePciInfo ( | |
| IN PCI_IO_DEVICE *PciIoDevice | |
| ) | |
| /*++ | |
| Routine Description: | |
| This routine is used to update the bar information for those incompatible PCI device | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: PciIoDevice - add argument and description to function comment | |
| // TODO: EFI_UNSUPPORTED - add return value to function comment | |
| { | |
| EFI_STATUS Status; | |
| UINTN BarIndex; | |
| UINTN BarEndIndex; | |
| BOOLEAN SetFlag; | |
| EFI_PCI_DEVICE_INFO PciDeviceInfo; | |
| VOID *Configuration; | |
| EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Ptr; | |
| Configuration = NULL; | |
| // | |
| // Check whether the device belongs to incompatible devices or not | |
| // If it is , then get its special requirement in the ACPI table | |
| // | |
| PciDeviceInfo.VendorID = PciIoDevice->Pci.Hdr.VendorId; | |
| PciDeviceInfo.DeviceID = PciIoDevice->Pci.Hdr.DeviceId; | |
| PciDeviceInfo.RevisionID = PciIoDevice->Pci.Hdr.RevisionID; | |
| PciDeviceInfo.SubsystemVendorID = PciIoDevice->Pci.Device.SubsystemVendorID; | |
| PciDeviceInfo.SubsystemID = PciIoDevice->Pci.Device.SubsystemID; | |
| Status = PciResourceUpdateCheck (&PciDeviceInfo, &Configuration); | |
| if (EFI_ERROR (Status)) { | |
| return Status; | |
| } | |
| // | |
| // Update PCI device information from the ACPI table | |
| // | |
| Ptr = (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *) Configuration; | |
| while (Ptr->Desc != ACPI_END_TAG_DESCRIPTOR) { | |
| if (Ptr->Desc != ACPI_ADDRESS_SPACE_DESCRIPTOR) { | |
| // | |
| // The format is not support | |
| // | |
| break; | |
| } | |
| BarIndex = (UINTN) Ptr->AddrTranslationOffset; | |
| BarEndIndex = BarIndex; | |
| // | |
| // Update all the bars in the device | |
| // | |
| if (BarIndex == PCI_BAR_ALL) { | |
| BarIndex = 0; | |
| BarEndIndex = PCI_MAX_BAR - 1; | |
| } | |
| if (BarIndex >= PCI_MAX_BAR) { | |
| Ptr++; | |
| continue; | |
| } | |
| for (; BarIndex <= BarEndIndex; BarIndex++) { | |
| SetFlag = FALSE; | |
| switch (Ptr->ResType) { | |
| case ACPI_ADDRESS_SPACE_TYPE_MEM: | |
| // | |
| // Make sure the bar is memory type | |
| // | |
| if (CheckBarType (PciIoDevice, (UINT8) BarIndex, PciBarTypeMem)) { | |
| SetFlag = TRUE; | |
| } | |
| break; | |
| case ACPI_ADDRESS_SPACE_TYPE_IO: | |
| // | |
| // Make sure the bar is IO type | |
| // | |
| if (CheckBarType (PciIoDevice, (UINT8) BarIndex, PciBarTypeIo)) { | |
| SetFlag = TRUE; | |
| } | |
| break; | |
| } | |
| if (SetFlag) { | |
| // | |
| // Update the new alignment for the device | |
| // | |
| SetNewAlign (&(PciIoDevice->PciBar[BarIndex].Alignment), Ptr->AddrRangeMax); | |
| // | |
| // Update the new length for the device | |
| // | |
| if (Ptr->AddrLen != PCI_BAR_NOCHANGE) { | |
| PciIoDevice->PciBar[BarIndex].Length = Ptr->AddrLen; | |
| } | |
| } | |
| } | |
| Ptr++; | |
| } | |
| gBS->FreePool (Configuration); | |
| return Status; | |
| } | |
| VOID | |
| SetNewAlign ( | |
| IN UINT64 *Alignment, | |
| IN UINT64 NewAlignment | |
| ) | |
| /*++ | |
| Routine Description: | |
| This routine will update the alignment with the new alignment | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: Alignment - add argument and description to function comment | |
| // TODO: NewAlignment - add argument and description to function comment | |
| { | |
| UINT64 OldAlignment; | |
| UINTN ShiftBit; | |
| // | |
| // The new alignment is the same as the original, | |
| // so skip it | |
| // | |
| if (NewAlignment == PCI_BAR_OLD_ALIGN) { | |
| return ; | |
| } | |
| // | |
| // Check the validity of the parameter | |
| // | |
| if (NewAlignment != PCI_BAR_EVEN_ALIGN && | |
| NewAlignment != PCI_BAR_SQUAD_ALIGN && | |
| NewAlignment != PCI_BAR_DQUAD_ALIGN ) { | |
| *Alignment = NewAlignment; | |
| return ; | |
| } | |
| OldAlignment = (*Alignment) + 1; | |
| ShiftBit = 0; | |
| // | |
| // Get the first non-zero hex value of the length | |
| // | |
| while ((OldAlignment & 0x0F) == 0x00) { | |
| OldAlignment = RShiftU64 (OldAlignment, 4); | |
| ShiftBit += 4; | |
| } | |
| // | |
| // Adjust the alignment to even, quad or double quad boundary | |
| // | |
| if (NewAlignment == PCI_BAR_EVEN_ALIGN) { | |
| if (OldAlignment & 0x01) { | |
| OldAlignment = OldAlignment + 2 - (OldAlignment & 0x01); | |
| } | |
| } else if (NewAlignment == PCI_BAR_SQUAD_ALIGN) { | |
| if (OldAlignment & 0x03) { | |
| OldAlignment = OldAlignment + 4 - (OldAlignment & 0x03); | |
| } | |
| } else if (NewAlignment == PCI_BAR_DQUAD_ALIGN) { | |
| if (OldAlignment & 0x07) { | |
| OldAlignment = OldAlignment + 8 - (OldAlignment & 0x07); | |
| } | |
| } | |
| // | |
| // Update the old value | |
| // | |
| NewAlignment = LShiftU64 (OldAlignment, ShiftBit) - 1; | |
| *Alignment = NewAlignment; | |
| return ; | |
| } | |
| UINTN | |
| PciParseBar ( | |
| IN PCI_IO_DEVICE *PciIoDevice, | |
| IN UINTN Offset, | |
| IN UINTN BarIndex | |
| ) | |
| /*++ | |
| Routine Description: | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: PciIoDevice - add argument and description to function comment | |
| // TODO: Offset - add argument and description to function comment | |
| // TODO: BarIndex - add argument and description to function comment | |
| { | |
| UINT32 Value; | |
| UINT32 OriginalValue; | |
| UINT32 Mask; | |
| UINT32 Data; | |
| UINT8 Index; | |
| EFI_STATUS Status; | |
| OriginalValue = 0; | |
| Value = 0; | |
| Status = BarExisted ( | |
| PciIoDevice, | |
| Offset, | |
| &Value, | |
| &OriginalValue | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| PciIoDevice->PciBar[BarIndex].BaseAddress = 0; | |
| PciIoDevice->PciBar[BarIndex].Length = 0; | |
| PciIoDevice->PciBar[BarIndex].Alignment = 0; | |
| // | |
| // Some devices don't fully comply to PCI spec 2.2. So be to scan all the BARs anyway | |
| // | |
| PciIoDevice->PciBar[BarIndex].Offset = (UINT8) Offset; | |
| return Offset + 4; | |
| } | |
| PciIoDevice->PciBar[BarIndex].Offset = (UINT8) Offset; | |
| if (Value & 0x01) { | |
| // | |
| // Device I/Os | |
| // | |
| Mask = 0xfffffffc; | |
| if (Value & 0xFFFF0000) { | |
| // | |
| // It is a IO32 bar | |
| // | |
| PciIoDevice->PciBar[BarIndex].BarType = PciBarTypeIo32; | |
| PciIoDevice->PciBar[BarIndex].Length = ((~(Value & Mask)) + 1); | |
| PciIoDevice->PciBar[BarIndex].Alignment = PciIoDevice->PciBar[BarIndex].Length - 1; | |
| } else { | |
| // | |
| // It is a IO16 bar | |
| // | |
| PciIoDevice->PciBar[BarIndex].BarType = PciBarTypeIo16; | |
| PciIoDevice->PciBar[BarIndex].Length = 0x0000FFFF & ((~(Value & Mask)) + 1); | |
| PciIoDevice->PciBar[BarIndex].Alignment = PciIoDevice->PciBar[BarIndex].Length - 1; | |
| } | |
| // | |
| // Workaround. Some platforms inplement IO bar with 0 length | |
| // Need to treat it as no-bar | |
| // | |
| if (PciIoDevice->PciBar[BarIndex].Length == 0) { | |
| PciIoDevice->PciBar[BarIndex].BarType = (PCI_BAR_TYPE) 0; | |
| } | |
| PciIoDevice->PciBar[BarIndex].Prefetchable = FALSE; | |
| PciIoDevice->PciBar[BarIndex].BaseAddress = OriginalValue & Mask; | |
| } else { | |
| Mask = 0xfffffff0; | |
| PciIoDevice->PciBar[BarIndex].BaseAddress = OriginalValue & Mask; | |
| switch (Value & 0x07) { | |
| // | |
| //memory space; anywhere in 32 bit address space | |
| // | |
| case 0x00: | |
| if (Value & 0x08) { | |
| PciIoDevice->PciBar[BarIndex].BarType = PciBarTypePMem32; | |
| } else { | |
| PciIoDevice->PciBar[BarIndex].BarType = PciBarTypeMem32; | |
| } | |
| PciIoDevice->PciBar[BarIndex].Length = (~(Value & Mask)) + 1; | |
| PciIoDevice->PciBar[BarIndex].Alignment = PciIoDevice->PciBar[BarIndex].Length - 1; | |
| break; | |
| // | |
| // memory space; anywhere in 64 bit address space | |
| // | |
| case 0x04: | |
| if (Value & 0x08) { | |
| PciIoDevice->PciBar[BarIndex].BarType = PciBarTypePMem64; | |
| } else { | |
| PciIoDevice->PciBar[BarIndex].BarType = PciBarTypeMem64; | |
| } | |
| // | |
| // According to PCI 2.2,if the bar indicates a memory 64 decoding, next bar | |
| // is regarded as an extension for the first bar. As a result | |
| // the sizing will be conducted on combined 64 bit value | |
| // Here just store the masked first 32bit value for future size | |
| // calculation | |
| // | |
| PciIoDevice->PciBar[BarIndex].Length = Value & Mask; | |
| PciIoDevice->PciBar[BarIndex].Alignment = PciIoDevice->PciBar[BarIndex].Length - 1; | |
| // | |
| // Increment the offset to point to next DWORD | |
| // | |
| Offset += 4; | |
| Status = BarExisted ( | |
| PciIoDevice, | |
| Offset, | |
| &Value, | |
| &OriginalValue | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| return Offset + 4; | |
| } | |
| // | |
| // Fix the length to support some spefic 64 bit BAR | |
| // | |
| Data = Value; | |
| Index = 0; | |
| for (Data = Value; Data != 0; Data >>= 1) { | |
| Index ++; | |
| } | |
| Value |= ((UINT32)(-1) << Index); | |
| // | |
| // Calculate the size of 64bit bar | |
| // | |
| PciIoDevice->PciBar[BarIndex].BaseAddress |= LShiftU64 ((UINT64) OriginalValue, 32); | |
| PciIoDevice->PciBar[BarIndex].Length = PciIoDevice->PciBar[BarIndex].Length | LShiftU64 ((UINT64) Value, 32); | |
| PciIoDevice->PciBar[BarIndex].Length = (~(PciIoDevice->PciBar[BarIndex].Length)) + 1; | |
| PciIoDevice->PciBar[BarIndex].Alignment = PciIoDevice->PciBar[BarIndex].Length - 1; | |
| break; | |
| // | |
| // reserved | |
| // | |
| default: | |
| PciIoDevice->PciBar[BarIndex].BarType = PciBarTypeUnknown; | |
| PciIoDevice->PciBar[BarIndex].Length = (~(Value & Mask)) + 1; | |
| PciIoDevice->PciBar[BarIndex].Alignment = PciIoDevice->PciBar[BarIndex].Length - 1; | |
| break; | |
| } | |
| } | |
| // | |
| // Check the length again so as to keep compatible with some special bars | |
| // | |
| if (PciIoDevice->PciBar[BarIndex].Length == 0) { | |
| PciIoDevice->PciBar[BarIndex].BarType = PciBarTypeUnknown; | |
| PciIoDevice->PciBar[BarIndex].BaseAddress = 0; | |
| PciIoDevice->PciBar[BarIndex].Alignment = 0; | |
| } | |
| // | |
| // Increment number of bar | |
| // | |
| return Offset + 4; | |
| } | |
| EFI_STATUS | |
| InitializePciDevice ( | |
| IN PCI_IO_DEVICE *PciIoDevice | |
| ) | |
| /*++ | |
| Routine Description: | |
| This routine is used to initialize the bar of a PCI device | |
| It can be called typically when a device is going to be rejected | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: PciIoDevice - add argument and description to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| { | |
| EFI_PCI_IO_PROTOCOL *PciIo; | |
| UINT8 Offset; | |
| PciIo = &(PciIoDevice->PciIo); | |
| // | |
| // Put all the resource apertures | |
| // Resource base is set to all ones so as to indicate its resource | |
| // has not been alloacted | |
| // | |
| for (Offset = 0x10; Offset <= 0x24; Offset += sizeof (UINT32)) { | |
| PciIoWrite (PciIo, EfiPciIoWidthUint32, Offset, 1, &gAllOne); | |
| } | |
| return EFI_SUCCESS; | |
| } | |
| EFI_STATUS | |
| InitializePpb ( | |
| IN PCI_IO_DEVICE *PciIoDevice | |
| ) | |
| /*++ | |
| Routine Description: | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: PciIoDevice - add argument and description to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| { | |
| EFI_PCI_IO_PROTOCOL *PciIo; | |
| PciIo = &(PciIoDevice->PciIo); | |
| // | |
| // Put all the resource apertures including IO16 | |
| // Io32, pMem32, pMem64 to quiescent state | |
| // Resource base all ones, Resource limit all zeros | |
| // | |
| PciIoWrite (PciIo, EfiPciIoWidthUint8, 0x1C, 1, &gAllOne); | |
| PciIoWrite (PciIo, EfiPciIoWidthUint8, 0x1D, 1, &gAllZero); | |
| PciIoWrite (PciIo, EfiPciIoWidthUint16, 0x20, 1, &gAllOne); | |
| PciIoWrite (PciIo, EfiPciIoWidthUint16, 0x22, 1, &gAllZero); | |
| PciIoWrite (PciIo, EfiPciIoWidthUint16, 0x24, 1, &gAllOne); | |
| PciIoWrite (PciIo, EfiPciIoWidthUint16, 0x26, 1, &gAllZero); | |
| PciIoWrite (PciIo, EfiPciIoWidthUint32, 0x28, 1, &gAllOne); | |
| PciIoWrite (PciIo, EfiPciIoWidthUint32, 0x2C, 1, &gAllZero); | |
| // | |
| // don't support use io32 as for now | |
| // | |
| PciIoWrite (PciIo, EfiPciIoWidthUint16, 0x30, 1, &gAllOne); | |
| PciIoWrite (PciIo, EfiPciIoWidthUint16, 0x32, 1, &gAllZero); | |
| // | |
| // Force Interrupt line to zero for cards that come up randomly | |
| // | |
| PciIoWrite (PciIo, EfiPciIoWidthUint8, 0x3C, 1, &gAllZero); | |
| return EFI_SUCCESS; | |
| } | |
| EFI_STATUS | |
| InitializeP2C ( | |
| IN PCI_IO_DEVICE *PciIoDevice | |
| ) | |
| /*++ | |
| Routine Description: | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: PciIoDevice - add argument and description to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| { | |
| EFI_PCI_IO_PROTOCOL *PciIo; | |
| PciIo = &(PciIoDevice->PciIo); | |
| // | |
| // Put all the resource apertures including IO16 | |
| // Io32, pMem32, pMem64 to quiescent state( | |
| // Resource base all ones, Resource limit all zeros | |
| // | |
| PciIoWrite (PciIo, EfiPciIoWidthUint32, 0x1c, 1, &gAllOne); | |
| PciIoWrite (PciIo, EfiPciIoWidthUint32, 0x20, 1, &gAllZero); | |
| PciIoWrite (PciIo, EfiPciIoWidthUint32, 0x24, 1, &gAllOne); | |
| PciIoWrite (PciIo, EfiPciIoWidthUint32, 0x28, 1, &gAllZero); | |
| PciIoWrite (PciIo, EfiPciIoWidthUint32, 0x2c, 1, &gAllOne); | |
| PciIoWrite (PciIo, EfiPciIoWidthUint32, 0x30, 1, &gAllZero); | |
| PciIoWrite (PciIo, EfiPciIoWidthUint32, 0x34, 1, &gAllOne); | |
| PciIoWrite (PciIo, EfiPciIoWidthUint32, 0x38, 1, &gAllZero); | |
| // | |
| // Force Interrupt line to zero for cards that come up randomly | |
| // | |
| PciIoWrite (PciIo, EfiPciIoWidthUint8, 0x3C, 1, &gAllZero); | |
| return EFI_SUCCESS; | |
| } | |
| PCI_IO_DEVICE * | |
| CreatePciIoDevice ( | |
| IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *PciRootBridgeIo, | |
| IN PCI_TYPE00 *Pci, | |
| UINT8 Bus, | |
| UINT8 Device, | |
| UINT8 Func | |
| ) | |
| /*++ | |
| Routine Description: | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: PciRootBridgeIo - add argument and description to function comment | |
| // TODO: Pci - add argument and description to function comment | |
| // TODO: Bus - add argument and description to function comment | |
| // TODO: Device - add argument and description to function comment | |
| // TODO: Func - add argument and description to function comment | |
| { | |
| EFI_STATUS Status; | |
| PCI_IO_DEVICE *PciIoDevice; | |
| PciIoDevice = NULL; | |
| Status = gBS->AllocatePool ( | |
| EfiBootServicesData, | |
| sizeof (PCI_IO_DEVICE), | |
| (VOID **) &PciIoDevice | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| return NULL; | |
| } | |
| ZeroMem (PciIoDevice, sizeof (PCI_IO_DEVICE)); | |
| PciIoDevice->Signature = PCI_IO_DEVICE_SIGNATURE; | |
| PciIoDevice->Handle = NULL; | |
| PciIoDevice->PciRootBridgeIo = PciRootBridgeIo; | |
| PciIoDevice->DevicePath = NULL; | |
| PciIoDevice->BusNumber = Bus; | |
| PciIoDevice->DeviceNumber = Device; | |
| PciIoDevice->FunctionNumber = Func; | |
| PciIoDevice->Decodes = 0; | |
| if (gFullEnumeration) { | |
| PciIoDevice->Allocated = FALSE; | |
| } else { | |
| PciIoDevice->Allocated = TRUE; | |
| } | |
| PciIoDevice->Registered = FALSE; | |
| PciIoDevice->Attributes = 0; | |
| PciIoDevice->Supports = 0; | |
| PciIoDevice->BusOverride = FALSE; | |
| PciIoDevice->AllOpRomProcessed = FALSE; | |
| PciIoDevice->IsPciExp = FALSE; | |
| CopyMem (&(PciIoDevice->Pci), Pci, sizeof (PCI_TYPE01)); | |
| // | |
| // Initialize the PCI I/O instance structure | |
| // | |
| Status = InitializePciIoInstance (PciIoDevice); | |
| Status = InitializePciDriverOverrideInstance (PciIoDevice); | |
| if (EFI_ERROR (Status)) { | |
| gBS->FreePool (PciIoDevice); | |
| return NULL; | |
| } | |
| // | |
| // Initialize the reserved resource list | |
| // | |
| InitializeListHead (&PciIoDevice->ReservedResourceList); | |
| // | |
| // Initialize the driver list | |
| // | |
| InitializeListHead (&PciIoDevice->OptionRomDriverList); | |
| // | |
| // Initialize the child list | |
| // | |
| InitializeListHead (&PciIoDevice->ChildList); | |
| return PciIoDevice; | |
| } | |
| EFI_STATUS | |
| PciEnumeratorLight ( | |
| IN EFI_HANDLE Controller | |
| ) | |
| /*++ | |
| Routine Description: | |
| This routine is used to enumerate entire pci bus system | |
| in a given platform | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: Controller - add argument and description to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| { | |
| EFI_STATUS Status; | |
| EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *PciRootBridgeIo; | |
| PCI_IO_DEVICE *RootBridgeDev; | |
| UINT16 MinBus; | |
| UINT16 MaxBus; | |
| EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Descriptors; | |
| MinBus = 0; | |
| MaxBus = PCI_MAX_BUS; | |
| Descriptors = NULL; | |
| // | |
| // If this host bridge has been already enumerated, then return successfully | |
| // | |
| if (RootBridgeExisted (Controller)) { | |
| return EFI_SUCCESS; | |
| } | |
| // | |
| // Open pci root bridge io protocol | |
| // | |
| Status = gBS->OpenProtocol ( | |
| Controller, | |
| &gEfiPciRootBridgeIoProtocolGuid, | |
| (VOID **) &PciRootBridgeIo, | |
| gPciBusDriverBinding.DriverBindingHandle, | |
| Controller, | |
| EFI_OPEN_PROTOCOL_BY_DRIVER | |
| ); | |
| if (EFI_ERROR (Status) && Status != EFI_ALREADY_STARTED) { | |
| return Status; | |
| } | |
| Status = PciRootBridgeIo->Configuration (PciRootBridgeIo, (VOID **) &Descriptors); | |
| if (EFI_ERROR (Status)) { | |
| return Status; | |
| } | |
| while (PciGetBusRange (&Descriptors, &MinBus, &MaxBus, NULL) == EFI_SUCCESS) { | |
| // | |
| // Create a device node for root bridge device with a NULL host bridge controller handle | |
| // | |
| RootBridgeDev = CreateRootBridge (Controller); | |
| if (!RootBridgeDev) { | |
| Descriptors++; | |
| continue; | |
| } | |
| // | |
| // Record the root bridge io protocol | |
| // | |
| RootBridgeDev->PciRootBridgeIo = PciRootBridgeIo; | |
| Status = PciPciDeviceInfoCollector ( | |
| RootBridgeDev, | |
| (UINT8) MinBus | |
| ); | |
| if (!EFI_ERROR (Status)) { | |
| // | |
| // Remove those PCI devices which are rejected when full enumeration | |
| // | |
| RemoveRejectedPciDevices (RootBridgeDev->Handle, RootBridgeDev); | |
| // | |
| // Process option rom light | |
| // | |
| ProcessOptionRomLight (RootBridgeDev); | |
| // | |
| // Determine attributes for all devices under this root bridge | |
| // | |
| DetermineDeviceAttribute (RootBridgeDev); | |
| // | |
| // If successfully, insert the node into device pool | |
| // | |
| InsertRootBridge (RootBridgeDev); | |
| } else { | |
| // | |
| // If unsuccessly, destroy the entire node | |
| // | |
| DestroyRootBridge (RootBridgeDev); | |
| } | |
| Descriptors++; | |
| } | |
| return EFI_SUCCESS; | |
| } | |
| EFI_STATUS | |
| PciGetBusRange ( | |
| IN EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR **Descriptors, | |
| OUT UINT16 *MinBus, | |
| OUT UINT16 *MaxBus, | |
| OUT UINT16 *BusRange | |
| ) | |
| /*++ | |
| Routine Description: | |
| Get the bus range. | |
| Arguments: | |
| Descriptors - A pointer to the address space descriptor. | |
| MinBus - The min bus. | |
| MaxBus - The max bus. | |
| BusRange - The bus range. | |
| Returns: | |
| Status Code. | |
| --*/ | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| // TODO: EFI_NOT_FOUND - add return value to function comment | |
| { | |
| while ((*Descriptors)->Desc != ACPI_END_TAG_DESCRIPTOR) { | |
| if ((*Descriptors)->ResType == ACPI_ADDRESS_SPACE_TYPE_BUS) { | |
| if (MinBus != NULL) { | |
| *MinBus = (UINT16) (*Descriptors)->AddrRangeMin; | |
| } | |
| if (MaxBus != NULL) { | |
| *MaxBus = (UINT16) (*Descriptors)->AddrRangeMax; | |
| } | |
| if (BusRange != NULL) { | |
| *BusRange = (UINT16) (*Descriptors)->AddrLen; | |
| } | |
| return EFI_SUCCESS; | |
| } | |
| (*Descriptors)++; | |
| } | |
| return EFI_NOT_FOUND; | |
| } | |
| EFI_STATUS | |
| StartManagingRootBridge ( | |
| IN PCI_IO_DEVICE *RootBridgeDev | |
| ) | |
| /*++ | |
| Routine Description: | |
| Arguments: | |
| Returns: | |
| None | |
| --*/ | |
| // TODO: RootBridgeDev - add argument and description to function comment | |
| // TODO: EFI_SUCCESS - add return value to function comment | |
| { | |
| EFI_HANDLE RootBridgeHandle; | |
| EFI_STATUS Status; | |
| EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *PciRootBridgeIo; | |
| // | |
| // Get the root bridge handle | |
| // | |
| RootBridgeHandle = RootBridgeDev->Handle; | |
| PciRootBridgeIo = NULL; | |
| // | |
| // Get the pci root bridge io protocol | |
| // | |
| Status = gBS->OpenProtocol ( | |
| RootBridgeHandle, | |
| &gEfiPciRootBridgeIoProtocolGuid, | |
| (VOID **) &PciRootBridgeIo, | |
| gPciBusDriverBinding.DriverBindingHandle, | |
| RootBridgeHandle, | |
| EFI_OPEN_PROTOCOL_BY_DRIVER | |
| ); | |
| if (EFI_ERROR (Status) && Status != EFI_ALREADY_STARTED) { | |
| return Status; | |
| } | |
| // | |
| // Store the PciRootBridgeIo protocol into root bridge private data | |
| // | |
| RootBridgeDev->PciRootBridgeIo = PciRootBridgeIo; | |
| return EFI_SUCCESS; | |
| } | |
| BOOLEAN | |
| IsPciDeviceRejected ( | |
| IN PCI_IO_DEVICE *PciIoDevice | |
| ) | |
| /*++ | |
| Routine Description: | |
| This routine can be used to check whether a PCI device should be rejected when light enumeration | |
| Arguments: | |
| Returns: | |
| TRUE This device should be rejected | |
| FALSE This device shouldn't be rejected | |
| --*/ | |
| // TODO: PciIoDevice - add argument and description to function comment | |
| { | |
| EFI_STATUS Status; | |
| UINT32 TestValue; | |
| UINT32 OldValue; | |
| UINT32 Mask; | |
| UINT8 BarOffset; | |
| // | |
| // PPB should be skip! | |
| // | |
| if (IS_PCI_BRIDGE (&PciIoDevice->Pci)) { | |
| return FALSE; | |
| } | |
| if (IS_CARDBUS_BRIDGE (&PciIoDevice->Pci)) { | |
| // | |
| // Only test base registers for P2C | |
| // | |
| for (BarOffset = 0x1C; BarOffset <= 0x38; BarOffset += 2 * sizeof (UINT32)) { | |
| Mask = (BarOffset < 0x2C) ? 0xFFFFF000 : 0xFFFFFFFC; | |
| Status = BarExisted (PciIoDevice, BarOffset, &TestValue, &OldValue); | |
| if (EFI_ERROR (Status)) { | |
| continue; | |
| } | |
| TestValue = TestValue & Mask; | |
| if ((TestValue != 0) && (TestValue == (OldValue & Mask))) { | |
| // | |
| // The bar isn't programed, so it should be rejected | |
| // | |
| return TRUE; | |
| } | |
| } | |
| return FALSE; | |
| } | |
| for (BarOffset = 0x14; BarOffset <= 0x24; BarOffset += sizeof (UINT32)) { | |
| // | |
| // Test PCI devices | |
| // | |
| Status = BarExisted (PciIoDevice, BarOffset, &TestValue, &OldValue); | |
| if (EFI_ERROR (Status)) { | |
| continue; | |
| } | |
| if (TestValue & 0x01) { | |
| // | |
| // IO Bar | |
| // | |
| Mask = 0xFFFFFFFC; | |
| TestValue = TestValue & Mask; | |
| if ((TestValue != 0) && (TestValue == (OldValue & Mask))) { | |
| return TRUE; | |
| } | |
| } else { | |
| // | |
| // Mem Bar | |
| // | |
| Mask = 0xFFFFFFF0; | |
| TestValue = TestValue & Mask; | |
| if ((TestValue & 0x07) == 0x04) { | |
| // | |
| // Mem64 or PMem64 | |
| // | |
| BarOffset += sizeof (UINT32); | |
| if ((TestValue != 0) && (TestValue == (OldValue & Mask))) { | |
| // | |
| // Test its high 32-Bit BAR | |
| // | |
| Status = BarExisted (PciIoDevice, BarOffset, &TestValue, &OldValue); | |
| if (TestValue == OldValue) { | |
| return TRUE; | |
| } | |
| } | |
| } else { | |
| // | |
| // Mem32 or PMem32 | |
| // | |
| if ((TestValue != 0) && (TestValue == (OldValue & Mask))) { | |
| return TRUE; | |
| } | |
| } | |
| } | |
| } | |
| return FALSE; | |
| } | |
| EFI_STATUS | |
| ResetAllPpbBusReg ( | |
| IN PCI_IO_DEVICE *Bridge, | |
| IN UINT8 StartBusNumber | |
| ) | |
| /*++ | |
| Routine Description: | |
| TODO: Add function description | |
| Arguments: | |
| Bridge - TODO: add argument description | |
| StartBusNumber - TODO: add argument description | |
| Returns: | |
| EFI_SUCCESS - TODO: Add description for return value | |
| --*/ | |
| { | |
| EFI_STATUS Status; | |
| PCI_TYPE00 Pci; | |
| UINT8 Device; | |
| UINT32 Register; | |
| UINT8 Func; | |
| UINT64 Address; | |
| EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *PciRootBridgeIo; | |
| PciRootBridgeIo = Bridge->PciRootBridgeIo; | |
| for (Device = 0; Device <= PCI_MAX_DEVICE; Device++) { | |
| for (Func = 0; Func <= PCI_MAX_FUNC; Func++) { | |
| // | |
| // Check to see whether a pci device is present | |
| // | |
| Status = PciDevicePresent ( | |
| PciRootBridgeIo, | |
| &Pci, | |
| StartBusNumber, | |
| Device, | |
| Func | |
| ); | |
| if (!EFI_ERROR (Status) && (IS_PCI_BRIDGE (&Pci))) { | |
| Register = 0; | |
| Address = EFI_PCI_ADDRESS (StartBusNumber, Device, Func, 0x18); | |
| Status = PciRootBridgeIoRead ( | |
| PciRootBridgeIo, | |
| &Pci, | |
| EfiPciWidthUint32, | |
| Address, | |
| 1, | |
| &Register | |
| ); | |
| // | |
| // Reset register 18h, 19h, 1Ah on PCI Bridge | |
| // | |
| Register &= 0xFF000000; | |
| Status = PciRootBridgeIoWrite ( | |
| PciRootBridgeIo, | |
| &Pci, | |
| EfiPciWidthUint32, | |
| Address, | |
| 1, | |
| &Register | |
| ); | |
| } | |
| if (Func == 0 && !IS_PCI_MULTI_FUNC (&Pci)) { | |
| // | |
| // Skip sub functions, this is not a multi function device | |
| // | |
| Func = PCI_MAX_FUNC; | |
| } | |
| } | |
| } | |
| return EFI_SUCCESS; | |
| } | |