| /** @file | |
| This file contains the definination for host controller memory management routines. | |
| Copyright (c) 2013 - 2018, Intel Corporation. All rights reserved.<BR> | |
| SPDX-License-Identifier: BSD-2-Clause-Patent | |
| **/ | |
| #ifndef _EFI_XHCI_MEM_H_ | |
| #define _EFI_XHCI_MEM_H_ | |
| #define USB_HC_BIT(a) ((UINTN)(1 << (a))) | |
| #define USB_HC_BIT_IS_SET(Data, Bit) \ | |
| ((BOOLEAN)(((Data) & USB_HC_BIT(Bit)) == USB_HC_BIT(Bit))) | |
| typedef struct _USBHC_MEM_BLOCK USBHC_MEM_BLOCK; | |
| struct _USBHC_MEM_BLOCK { | |
| UINT8 *Bits; // Bit array to record which unit is allocated | |
| UINTN BitsLen; | |
| UINT8 *Buf; | |
| UINT8 *BufHost; | |
| UINTN BufLen; // Memory size in bytes | |
| VOID *Mapping; | |
| USBHC_MEM_BLOCK *Next; | |
| }; | |
| // | |
| // USBHC_MEM_POOL is used to manage the memory used by USB | |
| // host controller. XHCI requires the control memory and transfer | |
| // data to be on the same 4G memory. | |
| // | |
| typedef struct _USBHC_MEM_POOL { | |
| EFI_PCI_IO_PROTOCOL *PciIo; | |
| BOOLEAN Check4G; | |
| UINT32 Which4G; | |
| USBHC_MEM_BLOCK *Head; | |
| } USBHC_MEM_POOL; | |
| // | |
| // Memory allocation unit, must be 2^n, n>4 | |
| // | |
| #define USBHC_MEM_UNIT 64 | |
| #define USBHC_MEM_UNIT_MASK (USBHC_MEM_UNIT - 1) | |
| #define USBHC_MEM_DEFAULT_PAGES 16 | |
| #define USBHC_MEM_ROUND(Len) (((Len) + USBHC_MEM_UNIT_MASK) & (~USBHC_MEM_UNIT_MASK)) | |
| #define USBHC_MEM_TRB_RINGS_BOUNDARY SIZE_64KB | |
| // | |
| // Advance the byte and bit to the next bit, adjust byte accordingly. | |
| // | |
| #define NEXT_BIT(Byte, Bit) \ | |
| do { \ | |
| (Bit)++; \ | |
| if ((Bit) > 7) { \ | |
| (Byte)++; \ | |
| (Bit) = 0; \ | |
| } \ | |
| } while (0) | |
| /** | |
| Initialize the memory management pool for the host controller. | |
| @param PciIo The PciIo that can be used to access the host controller. | |
| @retval EFI_SUCCESS The memory pool is initialized. | |
| @retval EFI_OUT_OF_RESOURCE Fail to init the memory pool. | |
| **/ | |
| USBHC_MEM_POOL * | |
| UsbHcInitMemPool ( | |
| IN EFI_PCI_IO_PROTOCOL *PciIo | |
| ); | |
| /** | |
| Release the memory management pool. | |
| @param Pool The USB memory pool to free. | |
| @retval EFI_SUCCESS The memory pool is freed. | |
| @retval EFI_DEVICE_ERROR Failed to free the memory pool. | |
| **/ | |
| EFI_STATUS | |
| UsbHcFreeMemPool ( | |
| IN USBHC_MEM_POOL *Pool | |
| ); | |
| /** | |
| Allocate some memory from the host controller's memory pool | |
| which can be used to communicate with host controller. | |
| @param Pool The host controller's memory pool. | |
| @param Size Size of the memory to allocate. | |
| @param AllocationForRing The allocated memory is for Ring or not. | |
| @return The allocated memory or NULL. | |
| **/ | |
| VOID * | |
| UsbHcAllocateMem ( | |
| IN USBHC_MEM_POOL *Pool, | |
| IN UINTN Size, | |
| IN BOOLEAN AllocationForRing | |
| ); | |
| /** | |
| Free the allocated memory back to the memory pool. | |
| @param Pool The memory pool of the host controller. | |
| @param Mem The memory to free. | |
| @param Size The size of the memory to free. | |
| **/ | |
| VOID | |
| UsbHcFreeMem ( | |
| IN USBHC_MEM_POOL *Pool, | |
| IN VOID *Mem, | |
| IN UINTN Size | |
| ); | |
| /** | |
| Calculate the corresponding pci bus address according to the Mem parameter. | |
| @param Pool The memory pool of the host controller. | |
| @param Mem The pointer to host memory. | |
| @param Size The size of the memory region. | |
| @param Alignment Alignment the size to USBHC_MEM_UNIT bytes. | |
| @return The pci memory address | |
| **/ | |
| EFI_PHYSICAL_ADDRESS | |
| UsbHcGetPciAddrForHostAddr ( | |
| IN USBHC_MEM_POOL *Pool, | |
| IN VOID *Mem, | |
| IN UINTN Size, | |
| IN BOOLEAN Alignment | |
| ); | |
| /** | |
| Calculate the corresponding host address according to the pci address. | |
| @param Pool The memory pool of the host controller. | |
| @param Mem The pointer to pci memory. | |
| @param Size The size of the memory region. | |
| @param Alignment Alignment the size to USBHC_MEM_UNIT bytes. | |
| @return The host memory address | |
| **/ | |
| EFI_PHYSICAL_ADDRESS | |
| UsbHcGetHostAddrForPciAddr ( | |
| IN USBHC_MEM_POOL *Pool, | |
| IN VOID *Mem, | |
| IN UINTN Size, | |
| IN BOOLEAN Alignment | |
| ); | |
| /** | |
| Allocates pages at a specified alignment that are suitable for an EfiPciIoOperationBusMasterCommonBuffer mapping. | |
| If Alignment is not a power of two and Alignment is not zero, then ASSERT(). | |
| @param PciIo The PciIo that can be used to access the host controller. | |
| @param Pages The number of pages to allocate. | |
| @param Alignment The requested alignment of the allocation. Must be a power of two. | |
| @param HostAddress The system memory address to map to the PCI controller. | |
| @param DeviceAddress The resulting map address for the bus master PCI controller to | |
| use to access the hosts HostAddress. | |
| @param Mapping A resulting value to pass to Unmap(). | |
| @retval EFI_SUCCESS Success to allocate aligned pages. | |
| @retval EFI_INVALID_PARAMETER Pages or Alignment is not valid. | |
| @retval EFI_OUT_OF_RESOURCES Do not have enough resources to allocate memory. | |
| **/ | |
| EFI_STATUS | |
| UsbHcAllocateAlignedPages ( | |
| IN EFI_PCI_IO_PROTOCOL *PciIo, | |
| IN UINTN Pages, | |
| IN UINTN Alignment, | |
| OUT VOID **HostAddress, | |
| OUT EFI_PHYSICAL_ADDRESS *DeviceAddress, | |
| OUT VOID **Mapping | |
| ); | |
| /** | |
| Frees memory that was allocated with UsbHcAllocateAlignedPages(). | |
| @param PciIo The PciIo that can be used to access the host controller. | |
| @param HostAddress The system memory address to map to the PCI controller. | |
| @param Pages The number of pages to free. | |
| @param Mapping The mapping value returned from Map(). | |
| **/ | |
| VOID | |
| UsbHcFreeAlignedPages ( | |
| IN EFI_PCI_IO_PROTOCOL *PciIo, | |
| IN VOID *HostAddress, | |
| IN UINTN Pages, | |
| VOID *Mapping | |
| ); | |
| #endif |