| /** @file | |
| The file provides basic SMBus host controller management | |
| and basic data transactions over the SMBus. | |
| Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR> | |
| SPDX-License-Identifier: BSD-2-Clause-Patent | |
| @par Revision Reference: PI | |
| Version 1.00. | |
| **/ | |
| #ifndef __SMBUS_HC_H__ | |
| #define __SMBUS_HC_H__ | |
| #include <IndustryStandard/SmBus.h> | |
| #define EFI_SMBUS_HC_PROTOCOL_GUID \ | |
| {0xe49d33ed, 0x513d, 0x4634, { 0xb6, 0x98, 0x6f, 0x55, 0xaa, 0x75, 0x1c, 0x1b} } | |
| typedef struct _EFI_SMBUS_HC_PROTOCOL EFI_SMBUS_HC_PROTOCOL; | |
| /** | |
| The Execute() function provides a standard way to execute an | |
| operation as defined in the System Management Bus (SMBus) | |
| Specification. The resulting transaction will be either that | |
| the SMBus slave devices accept this transaction or that this | |
| function returns with error. | |
| @param This A pointer to the EFI_SMBUS_HC_PROTOCOL instance. | |
| SlaveAddress The SMBus slave address of the device | |
| with which to communicate. Type | |
| EFI_SMBUS_DEVICE_ADDRESS is defined in | |
| EFI_PEI_SMBUS_PPI.Execute() in the Platform | |
| Initialization SMBus PPI Specification. | |
| @param Command This command is transmitted by the SMBus host | |
| controller to the SMBus slave device and the | |
| interpretation is SMBus slave device specific. | |
| It can mean the offset to a list of functions | |
| inside an SMBus slave device. Not all | |
| operations or slave devices support this | |
| command's registers. Type | |
| EFI_SMBUS_DEVICE_COMMAND is defined in | |
| EFI_PEI_SMBUS_PPI.Execute() in the Platform | |
| Initialization SMBus PPI Specification. | |
| @param Operation Signifies the particular SMBus | |
| hardware protocol instance it will use to | |
| execute the SMBus transactions. This SMBus | |
| hardware protocol is defined by the SMBus | |
| Specification and is not related to PI | |
| Architecture. Type EFI_SMBUS_OPERATION is | |
| defined in EFI_PEI_SMBUS_PPI.Execute() in the | |
| Platform Initialization SMBus PPI | |
| Specification. | |
| @param PecCheck Defines if Packet Error Code (PEC) checking | |
| is required for this operation. SMBus Host | |
| Controller Code Definitions Version 1.0 | |
| August 21, 2006 13 | |
| @param Length Signifies the number of bytes that this operation will do. | |
| The maximum number of bytes can be revision | |
| specific and operation specific. This field | |
| will contain the actual number of bytes that | |
| are executed for this operation. Not all | |
| operations require this argument. | |
| @param Buffer Contains the value of data to execute to the | |
| SMBus slave device. Not all operations require | |
| this argument. The length of this buffer is | |
| identified by Length. | |
| @retval EFI_SUCCESS The last data that was returned from the | |
| access matched the poll exit criteria. | |
| @retval EFI_CRC_ERROR Checksum is not correct (PEC is incorrect). | |
| @retval EFI_TIMEOUT Timeout expired before the operation was | |
| completed. Timeout is determined by the | |
| SMBus host controller device. | |
| @retval EFI_OUT_OF_RESOURCES The request could not be | |
| completed due to a lack of | |
| resources. | |
| @retval EFI_DEVICE_ERROR The request was not completed | |
| because a failure that was reflected | |
| in the Host Status Register bit. | |
| Device errors are a result of a | |
| transaction collision, illegal | |
| command field, unclaimed cycle (host | |
| initiated), or bus errors | |
| (collisions). | |
| @retval EFI_INVALID_PARAMETER Operation is not defined in | |
| EFI_SMBUS_OPERATION. | |
| @retval EFI_INVALID_PARAMETER Length/Buffer is NULL for | |
| operations except for | |
| EfiSmbusQuickRead and | |
| EfiSmbusQuickWrite. Length is | |
| outside the range of valid | |
| values. | |
| @retval EFI_UNSUPPORTED The SMBus operation or PEC is not | |
| supported. | |
| @retval EFI_BUFFER_TOO_SMALL Buffer is not sufficient for | |
| this operation. | |
| **/ | |
| typedef | |
| EFI_STATUS | |
| (EFIAPI *EFI_SMBUS_HC_EXECUTE_OPERATION)( | |
| IN CONST EFI_SMBUS_HC_PROTOCOL *This, | |
| IN EFI_SMBUS_DEVICE_ADDRESS SlaveAddress, | |
| IN EFI_SMBUS_DEVICE_COMMAND Command, | |
| IN EFI_SMBUS_OPERATION Operation, | |
| IN BOOLEAN PecCheck, | |
| IN OUT UINTN *Length, | |
| IN OUT VOID *Buffer | |
| ); | |
| /** | |
| The ArpDevice() function provides a standard way for a device driver to | |
| enumerate the entire SMBus or specific devices on the bus. | |
| @param This A pointer to the EFI_SMBUS_HC_PROTOCOL instance. | |
| @param ArpAll A Boolean expression that indicates if the | |
| host drivers need to enumerate all the devices | |
| or enumerate only the device that is | |
| identified by SmbusUdid. If ArpAll is TRUE, | |
| SmbusUdid and SlaveAddress are optional. If | |
| ArpAll is FALSE, ArpDevice will enumerate | |
| SmbusUdid and the address will be at | |
| SlaveAddress. | |
| @param SmbusUdid The Unique Device Identifier (UDID) that is | |
| associated with this device. Type | |
| EFI_SMBUS_UDID is defined in | |
| EFI_PEI_SMBUS_PPI.ArpDevice() in the | |
| Platform Initialization SMBus PPI | |
| Specification. | |
| @param SlaveAddress The SMBus slave address that is | |
| associated with an SMBus UDID. | |
| @retval EFI_SUCCESS The last data that was returned from the | |
| access matched the poll exit criteria. | |
| @retval EFI_CRC_ERROR Checksum is not correct (PEC is | |
| incorrect). | |
| @retval EFI_TIMEOUT Timeout expired before the operation was | |
| completed. Timeout is determined by the | |
| SMBus host controller device. | |
| @retval EFI_OUT_OF_RESOURCES The request could not be | |
| completed due to a lack of | |
| resources. | |
| @retval EFI_DEVICE_ERROR The request was not completed | |
| because a failure was reflected in | |
| the Host Status Register bit. Device | |
| Errors are a result of a transaction | |
| collision, illegal command field, | |
| unclaimed cycle (host initiated), or | |
| bus errors (collisions). | |
| @retval EFI_UNSUPPORTED ArpDevice, GetArpMap, and Notify are | |
| not implemented by this driver. | |
| **/ | |
| typedef | |
| EFI_STATUS | |
| (EFIAPI *EFI_SMBUS_HC_PROTOCOL_ARP_DEVICE)( | |
| IN CONST EFI_SMBUS_HC_PROTOCOL *This, | |
| IN BOOLEAN ArpAll, | |
| IN EFI_SMBUS_UDID *SmbusUdid OPTIONAL, | |
| IN OUT EFI_SMBUS_DEVICE_ADDRESS *SlaveAddress OPTIONAL | |
| ); | |
| /** | |
| The GetArpMap() function returns the mapping of all the SMBus devices | |
| that were enumerated by the SMBus host driver. | |
| @param This A pointer to the EFI_SMBUS_HC_PROTOCOL instance. | |
| @param Length Size of the buffer that contains the SMBus | |
| device map. | |
| @param SmbusDeviceMap The pointer to the device map as | |
| enumerated by the SMBus controller | |
| driver. | |
| @retval EFI_SUCCESS The SMBus returned the current device map. | |
| @retval EFI_UNSUPPORTED ArpDevice, GetArpMap, and Notify are | |
| not implemented by this driver. | |
| **/ | |
| typedef | |
| EFI_STATUS | |
| (EFIAPI *EFI_SMBUS_HC_PROTOCOL_GET_ARP_MAP)( | |
| IN CONST EFI_SMBUS_HC_PROTOCOL *This, | |
| IN OUT UINTN *Length, | |
| IN OUT EFI_SMBUS_DEVICE_MAP **SmbusDeviceMap | |
| ); | |
| /** | |
| The notify function does some actions. | |
| @param SlaveAddress | |
| The SMBUS hardware address to which the SMBUS device is preassigned or allocated. | |
| @param Data | |
| Data of the SMBus host notify command that the caller wants to be called. | |
| @return EFI_STATUS | |
| **/ | |
| typedef | |
| EFI_STATUS | |
| (EFIAPI *EFI_SMBUS_NOTIFY_FUNCTION)( | |
| IN EFI_SMBUS_DEVICE_ADDRESS SlaveAddress, | |
| IN UINTN Data | |
| ); | |
| /** | |
| The Notify() function registers all the callback functions to | |
| allow the bus driver to call these functions when the | |
| SlaveAddress/Data pair happens. | |
| @param This A pointer to the EFI_SMBUS_HC_PROTOCOL instance. | |
| @param SlaveAddress Address that the host controller detects | |
| as sending a message and calls all the registered function. | |
| @param Data Data that the host controller detects as sending | |
| message and calls all the registered function. | |
| @param NotifyFunction The function to call when the bus | |
| driver detects the SlaveAddress and | |
| Data pair. | |
| @retval EFI_SUCCESS NotifyFunction was registered. | |
| @retval EFI_UNSUPPORTED ArpDevice, GetArpMap, and Notify are | |
| not implemented by this driver. | |
| **/ | |
| typedef | |
| EFI_STATUS | |
| (EFIAPI *EFI_SMBUS_HC_PROTOCOL_NOTIFY)( | |
| IN CONST EFI_SMBUS_HC_PROTOCOL *This, | |
| IN EFI_SMBUS_DEVICE_ADDRESS SlaveAddress, | |
| IN UINTN Data, | |
| IN EFI_SMBUS_NOTIFY_FUNCTION NotifyFunction | |
| ); | |
| /// | |
| /// The EFI_SMBUS_HC_PROTOCOL provides SMBus host controller management and basic data | |
| /// transactions over SMBus. There is one EFI_SMBUS_HC_PROTOCOL instance for each SMBus | |
| /// host controller. | |
| /// | |
| struct _EFI_SMBUS_HC_PROTOCOL { | |
| EFI_SMBUS_HC_EXECUTE_OPERATION Execute; | |
| EFI_SMBUS_HC_PROTOCOL_ARP_DEVICE ArpDevice; | |
| EFI_SMBUS_HC_PROTOCOL_GET_ARP_MAP GetArpMap; | |
| EFI_SMBUS_HC_PROTOCOL_NOTIFY Notify; | |
| }; | |
| extern EFI_GUID gEfiSmbusHcProtocolGuid; | |
| #endif |