| |
| <HTML> |
| |
| <HEAD> |
| <TITLE>Berkeley TestFloat History</TITLE> |
| </HEAD> |
| |
| <BODY> |
| |
| <H1>History of Berkeley TestFloat, to Release 3e</H1> |
| |
| <P> |
| John R. Hauser<BR> |
| 2018 January 20<BR> |
| </P> |
| |
| |
| <P> |
| Releases of Berkeley TestFloat normally parallel those of Berkeley SoftFloat, |
| on which TestFloat is based. |
| Each TestFloat release necessarily incorporates all bug fixes from the |
| corresponding release of SoftFloat. |
| </P> |
| |
| |
| <H3>Release 3e (2018 January)</H3> |
| |
| <UL> |
| |
| <LI> |
| Fixed a problem with the all-in-one <CODE>testfloat</CODE> program whereby |
| function set <CODE>-all1</CODE> incorrectly also tested the three-operand fused |
| multiply-add operations. |
| |
| <LI> |
| Modified the expected behavior of rounding mode <CODE>odd</CODE> (jamming) when |
| rounding to an integer value (either conversion to an integer format or a |
| ‘<CODE>roundToInt</CODE>’ function). |
| Previously, for those cases only, rounding mode <CODE>odd</CODE> was expected |
| to act the same as rounding to minimum magnitude. |
| Now, when rounding to an integer value, the nearest odd integer is expected, |
| consistent with the round-to-odd result of other operations. |
| |
| <LI> |
| Added options <CODE>-checkInvInts</CODE> and <CODE>-checkAll</CODE> to programs |
| <CODE>testfloat_ver</CODE> and <CODE>testfloat</CODE>. |
| |
| <LI> |
| Improved the checking of integer results of invalid operations. |
| |
| </UL> |
| |
| |
| <H3>Release 3d (2017 August)</H3> |
| |
| <UL> |
| |
| <LI> |
| When the all-in-one <CODE>testfloat</CODE> program is compiled to test the C |
| language’s arithmetic, added the ability to test library functions |
| <CODE>sqrtf</CODE>, <CODE>sqrtl</CODE>, <CODE>fmaf</CODE>, <CODE>fma</CODE>, |
| and <CODE>fmal</CODE>, which were added to the <NOBR>C Standard</NOBR> in 1999. |
| |
| </UL> |
| |
| |
| <H3>Release 3c (2017 February)</H3> |
| |
| <UL> |
| |
| <LI> |
| Added support for testing rounding mode <CODE>odd</CODE> (jamming). |
| |
| <LI> |
| Made support for testing <NOBR>64-bit</NOBR> double-precistion floating-point |
| be subject to macro <CODE>FLOAT64</CODE> (akin to macros <CODE>FLOAT16</CODE>, |
| <CODE>EXTFLOAT80</CODE>, and <CODE>FLOAT128</CODE> from before). |
| |
| <LI> |
| Fixed some bugs that caused compilation to fail with certain combinations of |
| option macro settings. |
| |
| <LI> |
| Corrected the types of two internal variables to be <CODE>sig_atomic_t</CODE> |
| instead of <CODE>bool</CODE>. |
| |
| <LI> |
| Improved the formatting of some error reports (concerning where lines are |
| broken when they exceed 79 characters in length). |
| |
| </UL> |
| |
| |
| <H3>Release 3b (2016 July)</H3> |
| |
| <UL> |
| |
| <LI> |
| Added the ability to test the common <NOBR>16-bit</NOBR> |
| “half-precision” floating-point format. |
| |
| <LI> |
| Added a <CODE>-seed</CODE> option to programs <CODE>testfloat_gen</CODE>, |
| <CODE>testfloat</CODE>, and <CODE>testsoftfloat</CODE> for setting the seed for |
| the pseudo-random number generator used to generate test cases. |
| |
| <LI> |
| Where a specific choice is needed for how tininess is detected on underflow, |
| changed the default to be the detection of tininess after rounding |
| (<CODE>-tininessafter</CODE>) instead of before rounding |
| (<CODE>-tininessbefore</CODE>). |
| |
| <LI> |
| Modified the format of reported discrepancies to show the signs of |
| floating-point values using <CODE>+</CODE> and <CODE>-</CODE> characters. |
| |
| <LI> |
| Documented the use of the <CODE>INLINE</CODE> macro, and fixed the sources for |
| the case that function inlining is not supported by the C compiler. |
| |
| <LI> |
| Documented the possible need to define macro <CODE>THREAD_LOCAL</CODE> to match |
| how the SoftFloat library was built. |
| |
| <LI> |
| Modified the provided Makefiles to allow some options to be overridden from the |
| <CODE>make</CODE> command. |
| |
| </UL> |
| |
| |
| <H3>Release 3a (2015 October)</H3> |
| |
| <UL> |
| |
| <LI> |
| Replaced the license text supplied by the University of California, Berkeley, |
| and fixed some minor build problems. |
| |
| </UL> |
| |
| |
| <H3>Release 3 (2015 February)</H3> |
| |
| <UL> |
| |
| <LI> |
| Complete rewrite, funded by the University of California, Berkeley, and |
| consequently having a different use license than earlier releases. |
| Visible changes included different names for testable functions and command |
| options. |
| |
| <LI> |
| Reinstated separate programs for generating test cases |
| (<CODE>testfloat_ver</CODE>) and verifying test results |
| (<CODE>testfloat_gen</CODE>), as alternatives to the all-in-one |
| <CODE>testfloat</CODE> program (which remained supported). |
| |
| <LI> |
| Added support for testing conversions between floating-point and unsigned |
| integers, both <NOBR>32-bit</NOBR> and <NOBR>64-bit</NOBR>. |
| |
| <LI> |
| Added support for testing a fused multiply-add operation, for all testable |
| floating-point formats except <NOBR>80-bit</NOBR> double-extended-precision. |
| |
| <LI> |
| Added support for testing a fifth rounding mode, <CODE>near_maxMag</CODE> |
| (round to nearest, with ties to maximum magnitude, away from zero). |
| |
| <LI> |
| Added <CODE>timesoftfloat</CODE> (previously found in the Berkeley SoftFloat |
| package). |
| |
| </UL> |
| |
| |
| <H3>Release 2c (2015 January)</H3> |
| |
| <UL> |
| |
| <LI> |
| Fixed mistakes affecting some <NOBR>64-bit</NOBR> processors. |
| |
| <LI> |
| Made minor updates to the documentation, including improved wording for the |
| legal restrictions on using TestFloat releases <NOBR>through 2c</NOBR> (not |
| applicable to <NOBR>Release 3</NOBR> or later). |
| |
| </UL> |
| |
| |
| <P> |
| There was never a <NOBR>Release 2b</NOBR>. |
| </P> |
| |
| |
| <H3>Release 2a (1998 December)</H3> |
| |
| <UL> |
| |
| <LI> |
| Added support for testing conversions between floating-point and |
| <NOBR>64-bit</NOBR> signed integers. |
| |
| <LI> |
| Improved the Makefiles. |
| |
| </UL> |
| |
| |
| <H3>Release 2 (1997 June)</H3> |
| |
| <UL> |
| |
| <LI> |
| Integrated the generation of test cases and the checking of system results into |
| a single program. |
| (Before they were separate programs, normally joined by explicit command-line |
| pipes.) |
| |
| <LI> |
| Improved the sequence of test cases. |
| |
| <LI> |
| Added support for testing <NOBR>80-bit</NOBR> double-extended-precision and |
| <NOBR>128-bit</NOBR> quadruple precision. |
| |
| <LI> |
| Made program output more readable, and added new command arguments. |
| |
| <LI> |
| Reduced dependence on the quality of the standard <CODE>rand</CODE> function |
| for generating test cases. |
| (Previously naively expected <CODE>rand</CODE> to be able to generate good |
| random bits for the entire machine word width.) |
| |
| <LI> |
| Created <CODE>testsoftfloat</CODE>, with its own simpler complete software |
| floating-point (“slowfloat”) for comparison purposes. |
| |
| <LI> |
| Made some changes to the source file structure, including renaming |
| <CODE>environment.h</CODE> to <CODE>milieu.h</CODE> (to avoid confusion with |
| environment variables). |
| |
| </UL> |
| |
| |
| <H3>Release 1a (1996 July)</H3> |
| |
| <UL> |
| |
| <LI> |
| Added the <CODE>-tininessbefore</CODE> and <CODE>-tininessafter</CODE> options |
| to control whether tininess should be detected before or after rounding. |
| |
| </UL> |
| |
| |
| <H3>Release 1 (1996 July)</H3> |
| |
| <UL> |
| |
| <LI> |
| Original release. |
| |
| </UL> |
| |
| |
| </BODY> |
| |