| |
| <HTML> |
| |
| <HEAD> |
| <TITLE>testfloat</TITLE> |
| </HEAD> |
| |
| <BODY> |
| |
| <H1>Berkeley TestFloat Release 3: <CODE>testfloat</CODE></H1> |
| |
| <P> |
| John R. Hauser<BR> |
| 2015 Jan 9<BR> |
| </P> |
| |
| |
| <H2>Overview</H2> |
| |
| <P> |
| The <CODE>testfloat</CODE> program tests an implementation of floating-point |
| arithmetic for conformity to the IEEE Standard for Binary Floating-Point |
| Arithmetic. |
| <CODE>testfloat</CODE> is part of the Berkeley TestFloat package, a small |
| collection of programs for performing such tests. |
| For general information about TestFloat, see file |
| <A HREF="TestFloat-general.html"><NOBR><CODE>TestFloat-general.html</CODE></NOBR></A>. |
| </P> |
| |
| <P> |
| The <CODE>testfloat</CODE> program is an all-in-one tool for testing |
| floating-point arithmetic. |
| It generates test operand values, invokes a floating-point operation with the |
| generated operands, and examines the corresponding computed results, reporting |
| unexpected results as likely errors. |
| While the processes of generating inputs and examining results are generic, a |
| particular build of <CODE>testfloat</CODE> is limited to testing only the one |
| implementation of floating-point it has been compiled to invoke. |
| For example, while one instance of <CODE>testfloat</CODE> might be compiled to |
| execute a computer’s hardware instruction for floating-point addition, a |
| different version might be compiled to call a subroutine called |
| <CODE>myAddFloat</CODE> that is linked into the <CODE>testfloat</CODE> program. |
| To test a new implementation of floating-point (a new set of machine |
| instructions or a new set of subroutines), a new <CODE>testfloat</CODE> must be |
| compiled containing the code needed to invoke the new floating-point. |
| </P> |
| |
| <P> |
| The default build of <CODE>testfloat</CODE> assumes that C types |
| <CODE>float</CODE> and <CODE>double</CODE> are <NOBR>32-bit</NOBR> and |
| <NOBR>64-bit</NOBR> binary floating-point types conforming to the IEEE |
| Standard, and tests the C operations of <CODE>+</CODE>, <CODE>-</CODE>, |
| <CODE>*</CODE>, <CODE>/</CODE>, type conversions, etc. |
| This tests the floating-point arithmetic seen by C programs. |
| Depending on the compiler and the options selected during compilation, this may |
| or may not be the same as the computer’s floating-point hardware, if any. |
| </P> |
| |
| <P> |
| The <CODE>testfloat</CODE> program will ordinarily test an operation for all |
| rounding modes defined by the IEEE Floating-Point Standard, one after the |
| other. |
| If the rounding mode is not supposed to have any affect on the |
| results—for instance, some operations do not require rounding—only |
| the nearest/even rounding mode is checked. |
| For double-extended-precision operations affected by rounding precision |
| control, <CODE>testfloat</CODE> also tests all three rounding precision modes, |
| one after the other. |
| Testing can be limited to a single rounding mode and/or rounding precision with |
| appropriate command-line options. |
| </P> |
| |
| <P> |
| For more about the operation of <CODE>testfloat</CODE> and how to interpret its |
| output, refer to |
| <A HREF="TestFloat-general.html"><NOBR><CODE>TestFloat-general.html</CODE></NOBR></A>. |
| </P> |
| |
| |
| <H2>Command Syntax</H2> |
| |
| <P> |
| The <CODE>testfloat</CODE> program is executed as a command with this syntax: |
| <BLOCKQUOTE> |
| <PRE> |
| testfloat [<option>...] <function> |
| </PRE> |
| </BLOCKQUOTE> |
| Square brackets (<CODE>[ ]</CODE>) denote optional arguments, |
| <CODE><option></CODE> is a supported option, and |
| <CODE><function></CODE> is the name of either a testable operation or a |
| function set. |
| The available options and function sets are documented below. |
| The <CODE>-list</CODE> option can be used to obtain a list of all testable |
| operations for a given build of <CODE>testfloat</CODE>. |
| If <CODE>testfloat</CODE> is executed without any arguments, a summary of usage |
| is written. |
| </P> |
| |
| |
| <H2>Options</H2> |
| |
| <P> |
| The <CODE>testfloat</CODE> program accepts several command options. |
| If mutually contradictory options are given, the last one has priority. |
| </P> |
| |
| <H3><CODE>-help</CODE></H3> |
| |
| <P> |
| The <CODE>-help</CODE> option causes a summary of program usage to be written, |
| after which the program exits. |
| </P> |
| |
| <H3><CODE>-list</CODE></H3> |
| |
| <P> |
| The <CODE>-list</CODE> option causes a list of testable operations to be |
| written, after which the program exits. |
| The set of testable operations is just the set of operations that this build of |
| <CODE>testfloat</CODE> has some way to invoke for testing. |
| </P> |
| |
| <H3><CODE>-level <num></CODE></H3> |
| |
| <P> |
| The <CODE>-level</CODE> option sets the level of testing. |
| The argument to <CODE>-level</CODE> can be either 1 <NOBR>or 2</NOBR>. |
| The default is <NOBR>level 1</NOBR>. |
| Level 2 performs many more tests than <NOBR>level 1</NOBR> and thus can reveal |
| bugs not found by <NOBR>level 1</NOBR>. |
| </P> |
| |
| <H3><CODE>-errors <num></CODE></H3> |
| |
| <P> |
| The <CODE>-errors</CODE> option instructs <CODE>testfloat</CODE> to report no |
| more than the specified number of errors for any combination of operation, |
| rounding mode, etc. |
| The argument to <CODE>-errors</CODE> must be a nonnegative decimal integer. |
| Once the specified number of error reports has been generated, |
| <CODE>testfloat</CODE> ends the current test and begins the next one, if any. |
| The default is <NOBR><CODE>-errors</CODE> <CODE>20</CODE></NOBR>. |
| </P> |
| |
| <P> |
| Against intuition, <NOBR><CODE>-errors</CODE> <CODE>0</CODE></NOBR> causes |
| <CODE>testfloat</CODE> to report every error it finds. |
| </P> |
| |
| <H3><CODE>-errorstop</CODE></H3> |
| |
| <P> |
| The <CODE>-errorstop</CODE> option causes the program to exit after the first |
| operation for which any errors are reported. |
| </P> |
| |
| <H3><CODE>-forever</CODE></H3> |
| |
| <P> |
| The <CODE>-forever</CODE> option causes a single operation to be repeatedly |
| tested. |
| Only one rounding mode and/or rounding precision can be tested in a single |
| execution. |
| If not specified, the rounding mode defaults to nearest/even. |
| For <NOBR>80-bit</NOBR> double-extended-precision operations, the rounding |
| precision defaults to full double-extended precision. |
| The testing level is set to 2 by this option. |
| </P> |
| |
| <H3><CODE>-checkNaNs</CODE></H3> |
| |
| <P> |
| The <CODE>-checkNaNs</CODE> option causes <CODE>testfloat</CODE> to verify the |
| bitwise correctness of NaN results. |
| In order for this option to be sensible, <CODE>testfloat</CODE> must have been |
| compiled so that its internal reference implementation of floating-point |
| (SoftFloat) generates the proper NaN results for the system being tested. |
| </P> |
| |
| <H3><CODE>-precision32, -precision64, -precision80</CODE></H3> |
| |
| <P> |
| For <NOBR>80-bit</NOBR> double-extended-precision operations affected by |
| rounding precision control, the <CODE>-precision32</CODE> option restricts |
| testing to only the cases in which the rounding precision is |
| <NOBR>32 bits</NOBR>, equivalent to <NOBR>32-bit</NOBR> single-precision. |
| The other rounding precision choices are not tested. |
| Likewise, <CODE>-precision64</CODE> fixes the rounding precision to |
| <NOBR>64 bits</NOBR>, equivalent to <NOBR>64-bit</NOBR> double-precision, and |
| <CODE>-precision80</CODE> fixes the rounding precision to the full |
| <NOBR>80 bits</NOBR> of the double-extended-precision format. |
| All these options are ignored for operations not affected by rounding precision |
| control. |
| </P> |
| |
| <P> |
| The precision-control options may not be accepted at all if no |
| double-extended-precision operations are testable. |
| </P> |
| |
| <H3><CODE>-rnear_even, -rnear_maxMag, -rminMag, -rmin, -rmax</CODE></H3> |
| |
| <P> |
| The <CODE>-rnear_even</CODE> option restricts testing to only the cases in |
| which the rounding mode is nearest/even. |
| The other rounding mode choices are not tested. |
| Likewise, <CODE>-rnear_maxMag</CODE> forces rounding to nearest/maximum |
| magnitude (nearest-away), <CODE>-rminMag</CODE> forces rounding to minimum |
| magnitude (toward zero), <CODE>-rmin</CODE> forces rounding to minimum (down, |
| toward negative infinity), and <CODE>-rmax</CODE> forces rounding to maximum |
| (up, toward positive infinity). |
| These options are ignored for operations that are exact and thus do not round. |
| </P> |
| |
| <H3><CODE>-tininessbefore, -tininessafter</CODE></H3> |
| |
| <P> |
| The <CODE>-tininessbefore</CODE> option indicates that the floating-point |
| implementation being tested detects tininess on underflow before rounding. |
| The <CODE>-tininessafter</CODE> option indicates that tininess is detected |
| after rounding. |
| The <CODE>testfloat</CODE> program alters its expectations accordingly. |
| These options override the default selected when <CODE>testfloat</CODE> was |
| compiled. |
| Choosing the wrong one of these two options should cause error reports for some |
| (but not all) operations. |
| </P> |
| |
| |
| <H2>Function Sets</H2> |
| |
| <P> |
| Just as <CODE>testfloat</CODE> can test an operation for all five rounding |
| modes in sequence, multiple operations can be tested with a single execution of |
| <CODE>testfloat</CODE>. |
| Two sets are recognized: <CODE>-all1</CODE> and <CODE>-all2</CODE>. |
| The set <CODE>-all1</CODE> comprises all one-operand operations, while |
| <CODE>-all2</CODE> is all two-operand operations. |
| A function set is used in place of an operation name in the |
| <CODE>testfloat</CODE> command line, such as |
| <BLOCKQUOTE> |
| <PRE> |
| testfloat [<option>...] -all1 |
| </PRE> |
| </BLOCKQUOTE> |
| </P> |
| |
| |
| </BODY> |
| |
