blob: a4f69f1f3cb1f0c9af58ce479c3c7062a2e5c186 [file] [log] [blame]
\ *****************************************************************************
\ * Copyright (c) 2004, 2011 IBM Corporation
\ * All rights reserved.
\ * This program and the accompanying materials
\ * are made available under the terms of the BSD License
\ * which accompanies this distribution, and is available at
\ * http://www.opensource.org/licenses/bsd-license.php
\ *
\ * Contributors:
\ * IBM Corporation - initial implementation
\ ****************************************************************************/
\ ----------------------------------------------------------
\ **************** PCI Helper functions *******************
\ ----------------------------------------------------------
\ convert an integer to string of len digits
: int2str ( int len -- str len ) swap s>d rot <# 0 ?DO # LOOP #> ;
\ convert addr to busnr
: pci-addr2bus ( addr -- busnr ) 10 rshift FF and ;
\ convert addr to devnr
: pci-addr2dev ( addr -- dev ) B rshift 1F and ;
\ convert addr to functionnumber
: pci-addr2fn ( addr -- dev ) 8 rshift 7 and ;
\ convert busnr devnr to addr
: pci-bus2addr ( busnr devnr -- addr ) B lshift swap 10 lshift + ;
\ print out a pci config addr
: pci-addr-out ( addr -- ) dup pci-addr2bus 2 0.r space FFFF and 4 0.r ;
\ Dump out the whole configspace
: pci-dump ( addr -- )
10 0 DO
dup
cr i 4 * +
dup pci-addr-out space
rtas-config-l@ 8 0.r
LOOP
drop cr
;
\ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
\ the following functions use l@ to fetch the data,
\ that's because the some pcie cores have probs with w@
\ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
\ read Vendor ID
: pci-vendor@ ( addr -- id ) rtas-config-l@ FFFF and ;
\ read Device ID
: pci-device@ ( addr -- id ) rtas-config-l@ 10 rshift ;
\ read Status
: pci-status@ ( addr -- status ) 4 + rtas-config-l@ 10 rshift ;
\ read Revision ID
: pci-revision@ ( addr -- id ) 8 + rtas-config-b@ ;
\ read Class Code
: pci-class@ ( addr -- class ) 8 + rtas-config-l@ 8 rshift ;
\ read Cache Line Size
: pci-cache@ ( addr -- size ) C + rtas-config-b@ ;
\ read Header Type
: pci-htype@ ( addr -- type ) E + rtas-config-b@ ;
\ read Sub Vendor ID
: pci-sub-vendor@ ( addr -- sub-id ) 2C + rtas-config-l@ FFFF and ;
\ read Sub Device ID
: pci-sub-device@ ( addr -- sub-id ) 2C + rtas-config-l@ 10 rshift FFFF and ;
\ read Interrupt Pin
: pci-interrupt@ ( addr -- interrupt ) 3D + rtas-config-b@ ;
\ read Minimum Grant
: pci-min-grant@ ( addr -- min-gnt ) 3E + rtas-config-b@ ;
\ read Maximum Latency
: pci-max-lat@ ( addr -- max-lat ) 3F + rtas-config-b@ ;
\ Check if Capabilities are valid
: pci-capabilities? ( addr -- 0|1 ) pci-status@ 4 rshift 1 and ;
\ fetch the offset of the next capability
: pci-cap-next ( cap-addr -- next-cap-off ) rtas-config-b@ FC and ;
\ calc the address of the next capability
: pci-cap-next-addr ( cap-addr -- next-cap-addr ) 1+ dup pci-cap-next dup IF swap -100 and + ELSE nip THEN ;
\ Dump out all capabilities
: pci-cap-dump ( addr -- )
cr
dup pci-capabilities? IF
33 + BEGIN
pci-cap-next-addr dup 0<>
WHILE
dup pci-addr-out s" : " type
dup rtas-config-b@ 2 0.r cr
REPEAT
s" end found "
ELSE
s" capabilities not enabled!"
THEN
type cr drop
;
\ search the capability-list for this id
: pci-cap-find ( addr id -- capp-addr|0 )
swap dup pci-capabilities? IF
33 + BEGIN
pci-cap-next-addr dup 0<> IF
dup rtas-config-b@ 2 pick =
ELSE
true
THEN
UNTIL
nip
ELSE
2drop 0
THEN
;
\ check wether this device is a pci-express device
: pci-express? ( addr -- 0|1 ) 10 pci-cap-find 0<> ;
\ check wether this device is a pci-express device
: pci-x? ( addr -- 0|1 ) 07 pci-cap-find 0<> ;
\ check wether this device has extended config space
: pci-config-ext? ( addr -- 0|1 ) pci-express? ;
\ Disable Bus Master, Memory Space and I/O Space for this device
: pci-device-disable ( -- ) my-space 4 + dup rtas-config-l@ 7 invert and swap rtas-config-l! ;
\ Enable Bus Master
: pci-master-enable ( -- ) my-space 4 + dup rtas-config-l@ 4 or swap rtas-config-l! ;
\ Disable Bus Master
: pci-master-disable ( -- ) my-space 4 + dup rtas-config-l@ 4 invert and swap rtas-config-l! ;
\ Enable response to mem accesses of pci device
: pci-mem-enable ( -- ) my-space 4 + dup rtas-config-w@ 2 or swap rtas-config-w! ;
\ Enable response to I/O accesses of pci-device
: pci-io-enable ( -- ) my-space 4 + dup rtas-config-w@ 1 or swap rtas-config-w! ;
\ Enable Bus Master, I/O and mem access
: pci-enable ( -- ) my-space 4 + dup rtas-config-w@ 7 or swap rtas-config-w! ;
\ Enable #PERR and #SERR errors of pci-device
: pci-error-enable ( -- ) my-space 4 + dup rtas-config-w@ 140 or swap rtas-config-w! ;
\ prints out the ScanInformation about a device
\ char is a sign for device type e.g. D - device ; B - bridge
: pci-out ( addr char -- )
15 spaces
over pci-addr-out
s" (" type emit s" ) : " type
dup pci-vendor@ 4 0.r space
pci-device@ 4 0.r
4 spaces
;
\ set and fetch the interrupt Pin
: pci-irq-line@ ( addr -- irq-pin ) 3C + rtas-config-b@ ;
: pci-irq-line! ( pin addr -- ) 3C + rtas-config-b! ;
\ set and fetch primary bus number
: pci-bus-prim! ( nr addr -- ) 18 + dup rtas-config-l@ FFFFFF00 and rot + swap rtas-config-l! ;
: pci-bus-prim@ ( addr -- nr ) 18 + rtas-config-l@ FF and ;
\ set and fetch secondary bus number
: pci-bus-scnd! ( nr addr -- ) 18 + dup rtas-config-l@ FFFF00FF and rot 8 lshift + swap rtas-config-l! ;
: pci-bus-scnd@ ( addr -- nr ) 18 + rtas-config-l@ 8 rshift FF and ;
\ set and fetch subordinate bus number
: pci-bus-subo! ( nr addr -- ) 18 + dup rtas-config-l@ FF00FFFF and rot 10 lshift + swap rtas-config-l! ;
: pci-bus-subo@ ( addr -- nr ) 18 + rtas-config-l@ 10 rshift FF and ;
\ set and fetch primary, secondary and subordinate bus number
: pci-bus! ( subo scnd prim addr -- ) swap rot 8 lshift + rot 10 lshift + swap 18 + dup rtas-config-l@ FF000000 and rot + swap rtas-config-l! ;
: pci-bus@ ( addr -- subo scnd prim ) 18 + rtas-config-l@ dup 10 rshift FF and swap dup 8 rshift FF and swap FF and ;
\ Reset secondary Status
: pci-reset-2nd ( addr -- ) 1C + dup rtas-config-l@ FFFF0000 or swap rtas-config-l! ;