)]}'
{
  "commit": "b5900a58caf0416355ccab4dc9da55c9a388a953",
  "tree": "1ff501649efb9428ea094815eb83a30f931d4ede",
  "parents": [
    "1bac2b6b415bdeee35c21a30292a50ca2a614871"
  ],
  "author": {
    "name": "Marek Vasut",
    "email": "marek.vasut+renesas@gmail.com",
    "time": "Sun May 19 03:47:07 2019 +0200"
  },
  "committer": {
    "name": "Marek Vasut",
    "email": "marex@denx.de",
    "time": "Tue May 21 22:15:32 2019 +0200"
  },
  "message": "mmc: tmio: sdhi: HS400 manual adjustment\n\nSince Gen3 SDHI has an internal DS signal AC-spec violation in HS400 mode,\nCRC-error may occur in read command in HS400 mode. This phoenomenon occurs\nat low/high temperature.\n\nTo fix this, after completion of HS400 tuning, enable manual calibration.\nHowever, Gen3 M3 Ver.1.2 or earlier and H3 1.x does not support HS400.\nThese SoC forcibly use HS200 mode by SoC attribute.\n\nThe DT adjustment of the tuning parameters is not supported until the\nDT property names become clear.\n\nSigned-off-by: Marek Vasut \u003cmarek.vasut+renesas@gmail.com\u003e\nAdapted from a patch by Takeshi Saito \u003ctakeshi.saito.xv@renesas.com\u003e\nCc: Nobuhiro Iwamatsu \u003ciwamatsu@nigauri.org\u003e\nCc: Peng Fan \u003cpeng.fan@nxp.com\u003e\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "698ecf69bd5b3d9cbb27414d9b90598b291925e9",
      "old_mode": 33188,
      "old_path": "drivers/mmc/renesas-sdhi.c",
      "new_id": "7c53aa221e506eff5bd6caa57d42ee3bce3864b8",
      "new_mode": 33188,
      "new_path": "drivers/mmc/renesas-sdhi.c"
    },
    {
      "type": "modify",
      "old_id": "58ce3d65b02b22ad38256745773e7eba9e4c98dc",
      "old_mode": 33188,
      "old_path": "drivers/mmc/tmio-common.h",
      "new_id": "51607de142667b39ca85bfee2c60183b9c5a536d",
      "new_mode": 33188,
      "new_path": "drivers/mmc/tmio-common.h"
    }
  ]
}