blob: bdf3cc03dc5a5dcae811bfe33f6ba6edc3a3440d [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2019 Rockchip Electronics Co., Ltd
*/
#include <common.h>
#include <adc.h>
#include <asm/io.h>
#include <asm/arch/grf_rk3308.h>
#include <asm/arch-rockchip/hardware.h>
#include <linux/bitops.h>
#if defined(CONFIG_DEBUG_UART)
#define GRF_BASE 0xff000000
enum {
GPIO1C7_SHIFT = 8,
GPIO1C7_MASK = GENMASK(11, 8),
GPIO1C7_GPIO = 0,
GPIO1C7_UART1_RTSN,
GPIO1C7_UART2_TX_M0,
GPIO1C7_SPI2_MOSI,
GPIO1C7_JTAG_TMS,
GPIO1C6_SHIFT = 4,
GPIO1C6_MASK = GENMASK(7, 4),
GPIO1C6_GPIO = 0,
GPIO1C6_UART1_CTSN,
GPIO1C6_UART2_RX_M0,
GPIO1C6_SPI2_MISO,
GPIO1C6_JTAG_TCLK,
GPIO4D3_SHIFT = 6,
GPIO4D3_MASK = GENMASK(7, 6),
GPIO4D3_GPIO = 0,
GPIO4D3_SDMMC_D3,
GPIO4D3_UART2_TX_M1,
GPIO4D2_SHIFT = 4,
GPIO4D2_MASK = GENMASK(5, 4),
GPIO4D2_GPIO = 0,
GPIO4D2_SDMMC_D2,
GPIO4D2_UART2_RX_M1,
UART2_IO_SEL_SHIFT = 2,
UART2_IO_SEL_MASK = GENMASK(3, 2),
UART2_IO_SEL_M0 = 0,
UART2_IO_SEL_M1,
UART2_IO_SEL_USB,
};
void board_debug_uart_init(void)
{
static struct rk3308_grf * const grf = (void *)GRF_BASE;
/* Enable early UART2 channel m0 on the rk3308 */
rk_clrsetreg(&grf->soc_con5, UART2_IO_SEL_MASK,
UART2_IO_SEL_M0 << UART2_IO_SEL_SHIFT);
rk_clrsetreg(&grf->gpio1ch_iomux,
GPIO1C6_MASK | GPIO1C7_MASK,
GPIO1C6_UART2_RX_M0 << GPIO1C6_SHIFT |
GPIO1C7_UART2_TX_M0 << GPIO1C7_SHIFT);
}
#endif
#define KEY_DOWN_MIN_VAL 0
#define KEY_DOWN_MAX_VAL 30
int rockchip_dnl_key_pressed(void)
{
unsigned int val;
if (adc_channel_single_shot("saradc@ff1e0000", 1, &val)) {
printf("%s read adc key val failed\n", __func__);
return false;
}
if (val >= KEY_DOWN_MIN_VAL && val <= KEY_DOWN_MAX_VAL)
return true;
else
return false;
}