// SPDX-License-Identifier: GPL-2.0+
/*
 * Copyright 2020 NXP
 */

#include <common.h>
#include <miiphy.h>
#include <netdev.h>
#include <asm/arch/imx8ulp-pins.h>
#include <asm/arch/clock.h>
#include <asm/arch/pcc.h>
#include <asm/arch/sys_proto.h>
#include <miiphy.h>
#include <netdev.h>
#include <asm/gpio.h>

DECLARE_GLOBAL_DATA_PTR;

#if IS_ENABLED(CONFIG_FEC_MXC)
#define ENET_CLK_PAD_CTRL	(PAD_CTL_PUS_UP | PAD_CTL_DSE | PAD_CTL_IBE_ENABLE)
static iomux_cfg_t const enet_clk_pads[] = {
	IMX8ULP_PAD_PTE19__ENET0_REFCLK | MUX_PAD_CTRL(ENET_CLK_PAD_CTRL),
	IMX8ULP_PAD_PTF10__ENET0_1588_CLKIN | MUX_PAD_CTRL(ENET_CLK_PAD_CTRL),
};

static int setup_fec(void)
{
	/*
	 * Since ref clock and timestamp clock are from external,
	 * set the iomux prior the clock enablement
	 */
	imx8ulp_iomux_setup_multiple_pads(enet_clk_pads, ARRAY_SIZE(enet_clk_pads));

	/* Select enet time stamp clock: 001 - External Timestamp Clock */
	cgc1_enet_stamp_sel(1);

	/* enable FEC PCC */
	pcc_clock_enable(4, ENET_PCC4_SLOT, true);
	pcc_reset_peripheral(4, ENET_PCC4_SLOT, false);

	return 0;
}

int board_phy_config(struct phy_device *phydev)
{
	if (phydev->drv->config)
		phydev->drv->config(phydev);
	return 0;
}
#endif

#define I2C_PAD_CTRL	(PAD_CTL_ODE)
static const iomux_cfg_t lpi2c0_pads[] = {
	IMX8ULP_PAD_PTA8__LPI2C0_SCL | MUX_PAD_CTRL(I2C_PAD_CTRL),
	IMX8ULP_PAD_PTA9__LPI2C0_SDA | MUX_PAD_CTRL(I2C_PAD_CTRL),
};

#define TPM_PAD_CTRL	(PAD_CTL_DSE)
static const iomux_cfg_t tpm0_pads[] = {
	IMX8ULP_PAD_PTA3__TPM0_CH2 | MUX_PAD_CTRL(TPM_PAD_CTRL),
};

void mipi_dsi_mux_panel(void)
{
	int ret;
	struct gpio_desc desc;

	/* It is temp solution to directly access i2c, need change to rpmsg later */

	/* enable lpi2c0 clock and iomux */
	imx8ulp_iomux_setup_multiple_pads(lpi2c0_pads, ARRAY_SIZE(lpi2c0_pads));
	writel(0xD2000000, 0x28091060);

	ret = dm_gpio_lookup_name("gpio@20_9", &desc);
	if (ret) {
		printf("%s lookup gpio@20_9 failed ret = %d\n", __func__, ret);
		return;
	}

	ret = dm_gpio_request(&desc, "dsi_mux");
	if (ret) {
		printf("%s request dsi_mux failed ret = %d\n", __func__, ret);
		return;
	}

	dm_gpio_set_dir_flags(&desc, GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
}

void mipi_dsi_panel_backlight(void)
{
	/* It is temp solution to directly access pwm, need change to rpmsg later */
	imx8ulp_iomux_setup_multiple_pads(tpm0_pads, ARRAY_SIZE(tpm0_pads));
	writel(0xD4000001, 0x28091054);

	/* Use center-aligned PWM mode, CPWMS=1, MSnB:MSnA = 10, ELSnB:ELSnA = 00 */
	writel(1000, 0x28095018);
	writel(1000, 0x28095034); /* MOD = CV, full duty */
	writel(0x28, 0x28095010);
	writel(0x20, 0x28095030);
}

int board_init(void)
{

	if (IS_ENABLED(CONFIG_FEC_MXC))
		setup_fec();

	/* When sync with M33 is failed, use local driver to set for video */
	if (!is_m33_handshake_necessary() && IS_ENABLED(CONFIG_VIDEO)) {
		mipi_dsi_mux_panel();
		mipi_dsi_panel_backlight();
	}

	return 0;
}

int board_early_init_f(void)
{
	return 0;
}

int board_late_init(void)
{
	ulong addr;

#if CONFIG_IS_ENABLED(ENV_IS_IN_MMC)
	board_late_mmc_env_init();
#endif

	/* clear fdtaddr to avoid obsolete data */
	addr = env_get_hex("fdt_addr_r", 0);
	if (addr)
		memset((void *)addr, 0, 0x400);

	return 0;
}