// SPDX-License-Identifier: GPL-2.0+
/*
 * Copyright (c) 2022 Svyatoslav Ryhel <clamor95@gmail.com>
 */

#define LOG_CATEGORY UCLASS_PANEL_BACKLIGHT

#include <backlight.h>
#include <common.h>
#include <dm.h>
#include <i2c.h>
#include <log.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <asm/gpio.h>

#define LM3533_BL_MIN_BRIGHTNESS			0x02
#define LM3533_BL_MAX_BRIGHTNESS			0xFF

#define LM3533_SINK_OUTPUT_CONFIG_1			0x10
#define LM3533_CONTROL_BANK_A_PWM			0x14
#define LM3533_CONTROL_BANK_AB_BRIGHTNESS		0x1A
#define LM3533_CONTROL_BANK_A_FULLSCALE_CURRENT		0x1F
#define LM3533_CONTROL_BANK_ENABLE			0x27
#define LM3533_OVP_FREQUENCY_PWM_POLARITY		0x2C
#define LM3533_BRIGHTNESS_REGISTER_A			0x40

struct lm3533_backlight_priv {
	struct gpio_desc enable_gpio;
	u32 def_bl_lvl;
};

static int lm3533_backlight_enable(struct udevice *dev)
{
	struct lm3533_backlight_priv *priv = dev_get_priv(dev);
	int ret;

	dm_gpio_set_value(&priv->enable_gpio, 1);
	mdelay(5);

	/* HVLED 1 & 2 are controlled by Bank A */
	ret = dm_i2c_reg_write(dev, LM3533_SINK_OUTPUT_CONFIG_1, 0x00);
	if (ret)
		return ret;

	/* PWM input is disabled for CABC */
	ret = dm_i2c_reg_write(dev, LM3533_CONTROL_BANK_A_PWM, 0x00);
	if (ret)
		return ret;

	/* Linear & Control Bank A is configured for register Current control */
	ret = dm_i2c_reg_write(dev, LM3533_CONTROL_BANK_AB_BRIGHTNESS, 0x02);
	if (ret)
		return ret;

	/* Full-Scale Current (20.2mA) */
	ret = dm_i2c_reg_write(dev, LM3533_CONTROL_BANK_A_FULLSCALE_CURRENT, 0x13);
	if (ret)
		return ret;

	/* Control Bank A is enable */
	ret = dm_i2c_reg_write(dev, LM3533_CONTROL_BANK_ENABLE, 0x01);
	if (ret)
		return ret;

	ret = dm_i2c_reg_write(dev, LM3533_OVP_FREQUENCY_PWM_POLARITY, 0x0A);
	if (ret)
		return ret;

	return 0;
}

static int lm3533_backlight_set_brightness(struct udevice *dev, int percent)
{
	struct lm3533_backlight_priv *priv = dev_get_priv(dev);
	int ret;

	if (percent == BACKLIGHT_DEFAULT)
		percent = priv->def_bl_lvl;

	if (percent < LM3533_BL_MIN_BRIGHTNESS)
		percent = LM3533_BL_MIN_BRIGHTNESS;

	if (percent > LM3533_BL_MAX_BRIGHTNESS)
		percent = LM3533_BL_MAX_BRIGHTNESS;

	/* Set brightness level */
	ret = dm_i2c_reg_write(dev, LM3533_BRIGHTNESS_REGISTER_A,
			       percent);
	if (ret)
		return ret;

	return 0;
}

static int lm3533_backlight_probe(struct udevice *dev)
{
	struct lm3533_backlight_priv *priv = dev_get_priv(dev);
	int ret;

	if (device_get_uclass_id(dev->parent) != UCLASS_I2C)
		return -EPROTONOSUPPORT;

	ret = gpio_request_by_name(dev, "enable-gpios", 0,
				   &priv->enable_gpio, GPIOD_IS_OUT);
	if (ret) {
		log_err("Could not decode enable-gpios (%d)\n", ret);
		return ret;
	}

	priv->def_bl_lvl = dev_read_u32_default(dev, "default-brightness-level",
						LM3533_BL_MAX_BRIGHTNESS);

	return 0;
}

static const struct backlight_ops lm3533_backlight_ops = {
	.enable = lm3533_backlight_enable,
	.set_brightness = lm3533_backlight_set_brightness,
};

static const struct udevice_id lm3533_backlight_ids[] = {
	{ .compatible = "ti,lm3533" },
	{ }
};

U_BOOT_DRIVER(lm3533_backlight) = {
	.name		= "lm3533_backlight",
	.id		= UCLASS_PANEL_BACKLIGHT,
	.of_match	= lm3533_backlight_ids,
	.probe		= lm3533_backlight_probe,
	.ops		= &lm3533_backlight_ops,
	.priv_auto	= sizeof(struct lm3533_backlight_priv),
};