// SPDX-License-Identifier: GPL-2.0
/*
 * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
 */

/dts-v1/;

#include "k3-am642.dtsi"
#include "k3-am64-evm-ddr4-1600MTs.dtsi"
#include "k3-am64-ddr.dtsi"

/ {
	chosen {
		stdout-path = "serial2:115200n8";
		tick-timer = &timer1;
	};

	aliases {
		remoteproc0 = &sysctrler;
		remoteproc1 = &a53_0;
	};

	memory@80000000 {
		device_type = "memory";
		/* 2G RAM */
		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;

		bootph-pre-ram;
	};

	a53_0: a53@0 {
		compatible = "ti,am654-rproc";
		reg = <0x00 0x00a90000 0x00 0x10>;
		power-domains = <&k3_pds 61 TI_SCI_PD_EXCLUSIVE>,
				<&k3_pds 135 TI_SCI_PD_EXCLUSIVE>,
				<&k3_pds 137 TI_SCI_PD_EXCLUSIVE>;
		resets = <&k3_reset 135 0>;
		clocks = <&k3_clks 61 0>;
		assigned-clocks = <&k3_clks 61 0>, <&k3_clks 135 0>;
		assigned-clock-parents = <&k3_clks 61 2>;
		assigned-clock-rates = <200000000>, <1000000000>;
		ti,sci = <&dmsc>;
		ti,sci-proc-id = <32>;
		ti,sci-host-id = <10>;
		bootph-pre-ram;
	};

	reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		secure_ddr: optee@9e800000 {
			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
			alignment = <0x1000>;
			no-map;
		};
	};

	clk_200mhz: dummy-clock-200mhz {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <200000000>;
		bootph-pre-ram;
	};

	vtt_supply: vtt-supply {
		compatible = "regulator-gpio";
		regulator-name = "vtt";
		regulator-min-microvolt = <0>;
		regulator-max-microvolt = <3300000>;
		gpios = <&main_gpio0 12 GPIO_ACTIVE_HIGH>;
		states = <0 0x0 3300000 0x1>;
		bootph-pre-ram;
	};
};

&cbass_main {
	sysctrler: sysctrler {
		compatible = "ti,am654-system-controller";
		mboxes= <&secure_proxy_main 1>, <&secure_proxy_main 0>;
		mbox-names = "tx", "rx";
		bootph-pre-ram;
	};
};

&cbass_main {
	main_esm: esm@420000 {
		compatible = "ti,j721e-esm";
		reg = <0x0 0x420000 0x0 0x1000>;
		ti,esm-pins = <160>, <161>;
		bootph-pre-ram;
	};
};

&cbass_mcu {
	bootph-pre-ram;
	mcu_esm: esm@4100000 {
		compatible = "ti,j721e-esm";
		reg = <0x0 0x4100000 0x0 0x1000>;
		ti,esm-pins = <0>, <1>;
		bootph-pre-ram;
	};
};

&main_pmx0 {
	bootph-pre-ram;
	main_uart0_pins_default: main-uart0-pins-default {
		bootph-pre-ram;
		pinctrl-single,pins = <
			AM64X_IOPAD(0x0238, PIN_INPUT, 0)		/* (B16) UART0_CTSn */
			AM64X_IOPAD(0x023c, PIN_OUTPUT, 0)		/* (A16) UART0_RTSn */
			AM64X_IOPAD(0x0230, PIN_INPUT, 0)		/* (D15) UART0_RXD */
			AM64X_IOPAD(0x0234, PIN_OUTPUT, 0)		/* (C16) UART0_TXD */
		>;
	};

	main_uart1_pins_default: main-uart1-pins-default {
		bootph-pre-ram;
		pinctrl-single,pins = <
			AM64X_IOPAD(0x0248, PIN_INPUT, 0)		/* (D16) UART1_CTSn */
			AM64X_IOPAD(0x024c, PIN_OUTPUT, 0)		/* (E16) UART1_RTSn */
			AM64X_IOPAD(0x0240, PIN_INPUT, 0)		/* (E15) UART1_RXD */
			AM64X_IOPAD(0x0244, PIN_OUTPUT, 0)		/* (E14) UART1_TXD */
		>;
	};

	main_mmc0_pins_default: main-mmc0-pins-default {
		bootph-pre-ram;
		pinctrl-single,pins = <
			AM64X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0)	/* (B25) MMC0_CLK */
			AM64X_IOPAD(0x01aC, PIN_INPUT_PULLUP, 0)	/* (B27) MMC0_CMD */
			AM64X_IOPAD(0x01a4, PIN_INPUT_PULLUP, 0)	/* (A26) MMC0_DAT0 */
			AM64X_IOPAD(0x01a0, PIN_INPUT_PULLUP, 0)	/* (E25) MMC0_DAT1 */
			AM64X_IOPAD(0x019c, PIN_INPUT_PULLUP, 0)	/* (C26) MMC0_DAT2 */
			AM64X_IOPAD(0x0198, PIN_INPUT_PULLUP, 0)	/* (A25) MMC0_DAT3 */
			AM64X_IOPAD(0x0194, PIN_INPUT_PULLUP, 0)	/* (E24) MMC0_DAT4 */
			AM64X_IOPAD(0x0190, PIN_INPUT_PULLUP, 0)	/* (A24) MMC0_DAT5 */
			AM64X_IOPAD(0x018c, PIN_INPUT_PULLUP, 0)	/* (B26) MMC0_DAT6 */
			AM64X_IOPAD(0x0188, PIN_INPUT_PULLUP, 0)	/* (D25) MMC0_DAT7 */
			AM64X_IOPAD(0x01b0, PIN_INPUT, 0)		/* (C25) MMC0_DS */
		>;
	};

	main_mmc1_pins_default: main-mmc1-pins-default {
		bootph-pre-ram;
		pinctrl-single,pins = <
			AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0)	/* (J19) MMC1_CMD */
			AM64X_IOPAD(0x028c, PIN_INPUT_PULLDOWN, 0)	/* (L20) MMC1_CLK */
			AM64X_IOPAD(0x0288, PIN_INPUT_PULLUP, 0)	/* (K21) MMC1_DAT0 */
			AM64X_IOPAD(0x0284, PIN_INPUT_PULLUP, 0)	/* (L21) MMC1_DAT1 */
			AM64X_IOPAD(0x0280, PIN_INPUT_PULLUP, 0)	/* (K19) MMC1_DAT2 */
			AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0)	/* (K18) MMC1_DAT3 */
			AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0)	/* (D19) MMC1_SDCD */
			AM64X_IOPAD(0x029c, PIN_INPUT_PULLUP, 0)	/* (C20) MMC1_SDWP */
		>;
	};

	ddr_vtt_pins_default: ddr-vtt-pins-default {
		bootph-pre-ram;
		pinctrl-single,pins = <
			AM64X_IOPAD(0x0030, PIN_OUTPUT_PULLUP, 7)	/* (L18) OSPI0_CSN1.GPIO0_12 */
		>;
	};

	main_usb0_pins_default: main-usb0-pins-default {
		pinctrl-single,pins = <
			AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */
		>;
	};

	mdio1_pins_default: mdio1-pins-default {
		pinctrl-single,pins = <
			AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */
			AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */
		>;
	};

	rgmii1_pins_default: rgmii1-pins-default {
		pinctrl-single,pins = <
			AM64X_IOPAD(0x01cc, PIN_INPUT, 4) /* (W5) PRG0_PRU1_GPO7.RGMII1_RD0 */
			AM64X_IOPAD(0x01d4, PIN_INPUT, 4) /* (Y5) PRG0_PRU1_GPO9.RGMII1_RD1 */
			AM64X_IOPAD(0x01d8, PIN_INPUT, 4) /* (V6) PRG0_PRU1_GPO10.RGMII1_RD2 */
			AM64X_IOPAD(0x01f4, PIN_INPUT, 4) /* (V5) PRG0_PRU1_GPO17.RGMII1_RD3 */
			AM64X_IOPAD(0x0188, PIN_INPUT, 4) /* (AA5) PRG0_PRU0_GPO10.RGMII1_RXC */
			AM64X_IOPAD(0x0184, PIN_INPUT, 4) /* (W6) PRG0_PRU0_GPO9.RGMII1_RX_CTL */
			AM64X_IOPAD(0x0124, PIN_OUTPUT, 4) /* (V15) PRG1_PRU1_GPO7.RGMII1_TD0 */
			AM64X_IOPAD(0x012c, PIN_OUTPUT, 4) /* (V14) PRG1_PRU1_GPO9.RGMII1_TD1 */
			AM64X_IOPAD(0x0130, PIN_OUTPUT, 4) /* (W14) PRG1_PRU1_GPO10.RGMII1_TD2 */
			AM64X_IOPAD(0x014c, PIN_OUTPUT, 4) /* (AA14) PRG1_PRU1_GPO17.RGMII1_TD3 */
			AM64X_IOPAD(0x00e0, PIN_OUTPUT, 4) /* (U14) PRG1_PRU0_GPO10.RGMII1_TXC */
			AM64X_IOPAD(0x00dc, PIN_OUTPUT, 4) /* (U15) PRG1_PRU0_GPO9.RGMII1_TX_CTL */
		>;
	};

       rgmii2_pins_default: rgmii2-pins-default {
		pinctrl-single,pins = <
			AM64X_IOPAD(0x0108, PIN_INPUT, 4) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */
			AM64X_IOPAD(0x010c, PIN_INPUT, 4) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */
			AM64X_IOPAD(0x0110, PIN_INPUT, 4) /* (AA12) PRG1_PRU1_GPO2.RGMII2_RD2 */
			AM64X_IOPAD(0x0114, PIN_INPUT, 4) /* (Y12) PRG1_PRU1_GPO3.RGMII2_RD3 */
			AM64X_IOPAD(0x0120, PIN_INPUT, 4) /* (U11) PRG1_PRU1_GPO6.RGMII2_RXC */
			AM64X_IOPAD(0x0118, PIN_INPUT, 4) /* (W12) PRG1_PRU1_GPO4.RGMII2_RX_CTL */
			AM64X_IOPAD(0x0134, PIN_OUTPUT, 4) /* (AA10) PRG1_PRU1_GPO11.RGMII2_TD0 */
			AM64X_IOPAD(0x0138, PIN_OUTPUT, 4) /* (V10) PRG1_PRU1_GPO12.RGMII2_TD1 */
			AM64X_IOPAD(0x013c, PIN_OUTPUT, 4) /* (U10) PRG1_PRU1_GPO13.RGMII2_TD2 */
			AM64X_IOPAD(0x0140, PIN_OUTPUT, 4) /* (AA11) PRG1_PRU1_GPO14.RGMII2_TD3 */
			AM64X_IOPAD(0x0148, PIN_OUTPUT, 4) /* (Y10) PRG1_PRU1_GPO16.RGMII2_TXC */
			AM64X_IOPAD(0x0144, PIN_OUTPUT, 4) /* (Y11) PRG1_PRU1_GPO15.RGMII2_TX_CTL */
		>;
	};
};

&dmsc {
	mboxes= <&secure_proxy_main 0>,
		<&secure_proxy_main 1>,
		<&secure_proxy_main 0>;
	mbox-names = "rx", "tx", "notify";
	ti,host-id = <35>;
	ti,secure-host;
};

&main_uart0 {
	/delete-property/ power-domains;
	/delete-property/ clocks;
	/delete-property/ clock-names;
	pinctrl-names = "default";
	pinctrl-0 = <&main_uart0_pins_default>;
	status = "okay";
};

&main_uart1 {
	bootph-pre-ram;
	pinctrl-names = "default";
	pinctrl-0 = <&main_uart1_pins_default>;
};

&memorycontroller {
	vtt-supply = <&vtt_supply>;
	pinctrl-names = "default";
	pinctrl-0 = <&ddr_vtt_pins_default>;
};

&sdhci0 {
	/delete-property/ power-domains;
	clocks = <&clk_200mhz>;
	clock-names = "clk_xin";
	ti,driver-strength-ohm = <50>;
	disable-wp;
	pinctrl-0 = <&main_mmc0_pins_default>;
};

&sdhci1 {
	/delete-property/ power-domains;
	clocks = <&clk_200mhz>;
	clock-names = "clk_xin";
	ti,driver-strength-ohm = <50>;
	disable-wp;
	pinctrl-0 = <&main_mmc1_pins_default>;
};

&main_gpio0 {
	bootph-pre-ram;
	/delete-property/ power-domains;
};

/* EEPROM might be read before SYSFW is available */
&main_i2c0 {
	/delete-property/ power-domains;
};

&usbss0 {
	ti,vbus-divider;
	ti,usb2-only;
};

&usb0 {
	dr_mode = "otg";
	maximum-speed = "high-speed";
	pinctrl-names = "default";
	pinctrl-0 = <&main_usb0_pins_default>;
};

#include "k3-am642-evm-u-boot.dtsi"