// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
 * NXP ls1088a QDS common board device tree source
 *
 * Copyright 2017-2020 NXP
 */

#include "fsl-ls1088a.dtsi"

/ {
	aliases {
		spi0 = &qspi;
		spi1 = &dspi;
	};
};

&emdio1 {
	status = "okay";
};

&emdio2 {
	status = "okay";
};

&i2c0 {
	status = "okay";
	bootph-all;

	fpga@66 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "simple-mfd";
		reg = <0x66>;

		mux-mdio@54 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "mdio-mux-i2creg";
			reg = <0x54>;
			#mux-control-cells = <1>;
			mux-reg-masks = <0x54 0xe0>; // reg 0x54, bits 7:5
			mdio-parent-bus = <&emdio1>;

			mdio@00 {
				#address-cells = <1>;
				#size-cells = <0>;
				reg = <0x00>;

				rgmii_phy1: ethernet-phy@1 {
					reg = <0x1>;
				};
			};
			mdio@20 {
				#address-cells = <1>;
				#size-cells = <0>;
				reg = <0x20>;

				rgmii_phy2: ethernet-phy@2 {
					reg = <0x2>;
				};
			};

			emdio1_slot1: mdio@40 { /* I/O Slot #1 */
				reg = <0x40>;
				device-name = "emdio1_slot1";
				#address-cells = <1>;
				#size-cells = <0>;
			};

			emdio1_slot3: mdio@60 { /* I/O Slot #3 */
				reg = <0x60>;
				device-name = "emdio1_slot3";
				#address-cells = <1>;
				#size-cells = <0>;
			};
		};
	};

	i2c-mux@77 {
		compatible = "nxp,pca9547";
		reg = <0x77>;
		#address-cells = <1>;
		#size-cells = <0>;

		i2c@3 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x3>;

			rtc@51 {
				compatible = "nxp,pcf2129";
				reg = <0x51>;
			};
		};
	};
};

&ifc {
	#address-cells = <2>;
	#size-cells = <1>;
	/* NOR, NAND Flashes and FPGA on board */
	ranges = <0 0 0x5 0x80000000 0x08000000
			2 0 0x5 0x30000000 0x00010000
			3 0 0x5 0x20000000 0x00010000>;
	status = "okay";

	nor@0,0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "cfi-flash";
		reg = <0x0 0x0 0x8000000>;
		bank-width = <2>;
		device-width = <1>;
	};

	nand@2,0 {
		compatible = "fsl,ifc-nand";
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0x1 0x0 0x10000>;
	};

	fpga: board-control@3,0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "simple-bus", "fsl,ls1088aqds-fpga",
				"fsl,fpga-qixis";
		reg = <0x2 0x0 0x0000100>;
		bank-width = <1>;
		device-width = <1>;
		ranges = <0 2 0 0x100>;
	};
};

&duart0 {
	status = "okay";
};

&duart1 {
	status = "okay";
};

&dspi {
	bus-num = <0>;
	status = "okay";

	dflash0: n25q128a {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <1000000>; /* input clock */
	};

	dflash1: sst25wf040b {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "jedec,spi-nor";
		spi-max-frequency = <3500000>;
		reg = <1>;
	};

	dflash2: en25s64 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "jedec,spi-nor";
		spi-max-frequency = <3500000>;
		reg = <2>;
	};
};

&qspi {
	status = "okay";

	s25fs512s0: flash@0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "jedec,spi-nor";
		spi-max-frequency = <50000000>;
		reg = <0>;
	};

	s25fs512s1: flash@1 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "jedec,spi-nor";
		spi-max-frequency = <50000000>;
		reg = <1>;
	 };
};

&sata {
	status = "okay";
};