// SPDX-License-Identifier: GPL-2.0+
/*
 * Copyright (C) 2015 Google, Inc
 */

#include <common.h>
#include <dm.h>
#include <asm/io.h>
#include <asm/test.h>
#include <dm/test.h>
#include <test/test.h>
#include <test/ut.h>

/* Test that sandbox PCI works correctly */
static int dm_test_pci_base(struct unit_test_state *uts)
{
	struct udevice *bus;

	ut_assertok(uclass_get_device(UCLASS_PCI, 0, &bus));

	return 0;
}
DM_TEST(dm_test_pci_base, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT);

/* Test that sandbox PCI bus numbering and device works correctly */
static int dm_test_pci_busdev(struct unit_test_state *uts)
{
	struct udevice *bus;
	struct udevice *swap;
	u16 vendor, device;

	/* Test bus#0 and its devices */
	ut_assertok(uclass_get_device_by_seq(UCLASS_PCI, 0, &bus));

	ut_assertok(dm_pci_bus_find_bdf(PCI_BDF(0, 0x00, 0), &swap));
	vendor = 0;
	ut_assertok(dm_pci_read_config16(swap, PCI_VENDOR_ID, &vendor));
	ut_asserteq(SANDBOX_PCI_VENDOR_ID, vendor);
	ut_assertok(dm_pci_bus_find_bdf(PCI_BDF(0, 0x1f, 0), &swap));
	device = 0;
	ut_assertok(dm_pci_read_config16(swap, PCI_DEVICE_ID, &device));
	ut_asserteq(SANDBOX_PCI_SWAP_CASE_EMUL_ID, device);

	/* Test bus#1 and its devices */
	ut_assertok(uclass_get_device_by_seq(UCLASS_PCI, 1, &bus));

	ut_assertok(dm_pci_bus_find_bdf(PCI_BDF(1, 0x08, 0), &swap));
	vendor = 0;
	ut_assertok(dm_pci_read_config16(swap, PCI_VENDOR_ID, &vendor));
	ut_asserteq(SANDBOX_PCI_VENDOR_ID, vendor);
	ut_assertok(dm_pci_bus_find_bdf(PCI_BDF(1, 0x0c, 0), &swap));
	device = 0;
	ut_assertok(dm_pci_read_config16(swap, PCI_DEVICE_ID, &device));
	ut_asserteq(SANDBOX_PCI_SWAP_CASE_EMUL_ID, device);

	return 0;
}
DM_TEST(dm_test_pci_busdev, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT);

/* Test that we can use the swapcase device correctly */
static int dm_test_pci_swapcase(struct unit_test_state *uts)
{
	struct udevice *swap;
	ulong io_addr, mem_addr;
	char *ptr;

	/* Check that asking for the device 0 automatically fires up PCI */
	ut_assertok(dm_pci_bus_find_bdf(PCI_BDF(0, 0x00, 0), &swap));

	/* First test I/O */
	io_addr = dm_pci_read_bar32(swap, 0);
	outb(2, io_addr);
	ut_asserteq(2, inb(io_addr));

	/*
	 * Now test memory mapping - note we must unmap and remap to cause
	 * the swapcase emulation to see our data and response.
	 */
	mem_addr = dm_pci_read_bar32(swap, 1);
	ptr = map_sysmem(mem_addr, 20);
	strcpy(ptr, "This is a TesT");
	unmap_sysmem(ptr);

	ptr = map_sysmem(mem_addr, 20);
	ut_asserteq_str("tHIS IS A tESt", ptr);
	unmap_sysmem(ptr);

	/* Check that asking for the device 1 automatically fires up PCI */
	ut_assertok(dm_pci_bus_find_bdf(PCI_BDF(0, 0x1f, 0), &swap));

	/* First test I/O */
	io_addr = dm_pci_read_bar32(swap, 0);
	outb(2, io_addr);
	ut_asserteq(2, inb(io_addr));

	/*
	 * Now test memory mapping - note we must unmap and remap to cause
	 * the swapcase emulation to see our data and response.
	 */
	mem_addr = dm_pci_read_bar32(swap, 1);
	ptr = map_sysmem(mem_addr, 20);
	strcpy(ptr, "This is a TesT");
	unmap_sysmem(ptr);

	ptr = map_sysmem(mem_addr, 20);
	ut_asserteq_str("tHIS IS A tESt", ptr);
	unmap_sysmem(ptr);

	return 0;
}
DM_TEST(dm_test_pci_swapcase, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT);

/* Test that we can dynamically bind the device driver correctly */
static int dm_test_pci_drvdata(struct unit_test_state *uts)
{
	struct udevice *bus, *swap;

	/* Check that asking for the device automatically fires up PCI */
	ut_assertok(uclass_get_device_by_seq(UCLASS_PCI, 1, &bus));

	ut_assertok(dm_pci_bus_find_bdf(PCI_BDF(1, 0x08, 0), &swap));
	ut_asserteq(SWAP_CASE_DRV_DATA, swap->driver_data);
	ut_assertok(dev_has_ofnode(swap));
	ut_assertok(dm_pci_bus_find_bdf(PCI_BDF(1, 0x0c, 0), &swap));
	ut_asserteq(SWAP_CASE_DRV_DATA, swap->driver_data);
	ut_assertok(dev_has_ofnode(swap));
	ut_assertok(dm_pci_bus_find_bdf(PCI_BDF(1, 0x10, 0), &swap));
	ut_asserteq(SWAP_CASE_DRV_DATA, swap->driver_data);
	ut_assertok(!dev_has_ofnode(swap));

	return 0;
}
DM_TEST(dm_test_pci_drvdata, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT);

/* Test that devices on PCI bus#2 can be accessed correctly */
static int dm_test_pci_mixed(struct unit_test_state *uts)
{
	/* PCI bus#2 has both statically and dynamic declared devices */
	struct udevice *bus, *swap;
	u16 vendor, device;
	ulong io_addr, mem_addr;
	char *ptr;

	ut_assertok(uclass_get_device_by_seq(UCLASS_PCI, 2, &bus));

	/* Test the dynamic device */
	ut_assertok(dm_pci_bus_find_bdf(PCI_BDF(2, 0x08, 0), &swap));
	vendor = 0;
	ut_assertok(dm_pci_read_config16(swap, PCI_VENDOR_ID, &vendor));
	ut_asserteq(SANDBOX_PCI_VENDOR_ID, vendor);

	/* First test I/O */
	io_addr = dm_pci_read_bar32(swap, 0);
	outb(2, io_addr);
	ut_asserteq(2, inb(io_addr));

	/*
	 * Now test memory mapping - note we must unmap and remap to cause
	 * the swapcase emulation to see our data and response.
	 */
	mem_addr = dm_pci_read_bar32(swap, 1);
	ptr = map_sysmem(mem_addr, 30);
	strcpy(ptr, "This is a TesT oN dYNAMIc");
	unmap_sysmem(ptr);

	ptr = map_sysmem(mem_addr, 30);
	ut_asserteq_str("tHIS IS A tESt On DynamiC", ptr);
	unmap_sysmem(ptr);

	/* Test the static device */
	ut_assertok(dm_pci_bus_find_bdf(PCI_BDF(2, 0x1f, 0), &swap));
	device = 0;
	ut_assertok(dm_pci_read_config16(swap, PCI_DEVICE_ID, &device));
	ut_asserteq(SANDBOX_PCI_SWAP_CASE_EMUL_ID, device);

	/* First test I/O */
	io_addr = dm_pci_read_bar32(swap, 0);
	outb(2, io_addr);
	ut_asserteq(2, inb(io_addr));

	/*
	 * Now test memory mapping - note we must unmap and remap to cause
	 * the swapcase emulation to see our data and response.
	 */
	mem_addr = dm_pci_read_bar32(swap, 1);
	ptr = map_sysmem(mem_addr, 30);
	strcpy(ptr, "This is a TesT oN sTATIc");
	unmap_sysmem(ptr);

	ptr = map_sysmem(mem_addr, 30);
	ut_asserteq_str("tHIS IS A tESt On StatiC", ptr);
	unmap_sysmem(ptr);

	return 0;
}
DM_TEST(dm_test_pci_mixed, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT);

/* Test looking up PCI capability and extended capability */
static int dm_test_pci_cap(struct unit_test_state *uts)
{
	struct udevice *bus, *swap;
	int cap;

	ut_assertok(uclass_get_device_by_seq(UCLASS_PCI, 0, &bus));
	ut_assertok(dm_pci_bus_find_bdf(PCI_BDF(0, 0x1f, 0), &swap));

	/* look up PCI_CAP_ID_EXP */
	cap = dm_pci_find_capability(swap, PCI_CAP_ID_EXP);
	ut_asserteq(PCI_CAP_ID_EXP_OFFSET, cap);

	/* look up PCI_CAP_ID_PCIX */
	cap = dm_pci_find_capability(swap, PCI_CAP_ID_PCIX);
	ut_asserteq(0, cap);

	/* look up PCI_CAP_ID_MSIX starting from PCI_CAP_ID_PM_OFFSET */
	cap = dm_pci_find_next_capability(swap, PCI_CAP_ID_PM_OFFSET,
					  PCI_CAP_ID_MSIX);
	ut_asserteq(PCI_CAP_ID_MSIX_OFFSET, cap);

	/* look up PCI_CAP_ID_VNDR starting from PCI_CAP_ID_EXP_OFFSET */
	cap = dm_pci_find_next_capability(swap, PCI_CAP_ID_EXP_OFFSET,
					  PCI_CAP_ID_VNDR);
	ut_asserteq(0, cap);

	ut_assertok(uclass_get_device_by_seq(UCLASS_PCI, 1, &bus));
	ut_assertok(dm_pci_bus_find_bdf(PCI_BDF(1, 0x08, 0), &swap));

	/* look up PCI_EXT_CAP_ID_DSN */
	cap = dm_pci_find_ext_capability(swap, PCI_EXT_CAP_ID_DSN);
	ut_asserteq(PCI_EXT_CAP_ID_DSN_OFFSET, cap);

	/* look up PCI_EXT_CAP_ID_SRIOV */
	cap = dm_pci_find_ext_capability(swap, PCI_EXT_CAP_ID_SRIOV);
	ut_asserteq(0, cap);

	/* look up PCI_EXT_CAP_ID_DSN starting from PCI_EXT_CAP_ID_ERR_OFFSET */
	cap = dm_pci_find_next_ext_capability(swap, PCI_EXT_CAP_ID_ERR_OFFSET,
					      PCI_EXT_CAP_ID_DSN);
	ut_asserteq(PCI_EXT_CAP_ID_DSN_OFFSET, cap);

	/* look up PCI_EXT_CAP_ID_RCRB starting from PCI_EXT_CAP_ID_VC_OFFSET */
	cap = dm_pci_find_next_ext_capability(swap, PCI_EXT_CAP_ID_VC_OFFSET,
					      PCI_EXT_CAP_ID_RCRB);
	ut_asserteq(0, cap);

	return 0;
}
DM_TEST(dm_test_pci_cap, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT);

/* Test looking up BARs in EA capability structure */
static int dm_test_pci_ea(struct unit_test_state *uts)
{
	struct udevice *bus, *swap;
	void *bar;
	int cap;

	/*
	 * use emulated device mapping function, we're not using real physical
	 * addresses in this test
	 */
	sandbox_set_enable_pci_map(true);

	ut_assertok(uclass_get_device_by_seq(UCLASS_PCI, 0, &bus));
	ut_assertok(dm_pci_bus_find_bdf(PCI_BDF(0, 0x01, 0), &swap));

	/* look up PCI_CAP_ID_EA */
	cap = dm_pci_find_capability(swap, PCI_CAP_ID_EA);
	ut_asserteq(PCI_CAP_ID_EA_OFFSET, cap);

	/* test swap case in BAR 1 */
	bar = dm_pci_map_bar(swap, PCI_BASE_ADDRESS_0, 0, 0, PCI_REGION_TYPE, 0);
	ut_assertnonnull(bar);
	*(int *)bar = 2; /* swap upper/lower */

	bar = dm_pci_map_bar(swap, PCI_BASE_ADDRESS_1, 0, 0, PCI_REGION_TYPE, 0);
	ut_assertnonnull(bar);
	strcpy(bar, "ea TEST");
	unmap_sysmem(bar);
	bar = dm_pci_map_bar(swap, PCI_BASE_ADDRESS_1, 0, 0, PCI_REGION_TYPE, 0);
	ut_assertnonnull(bar);
	ut_asserteq_str("EA test", bar);

	/* test magic values in BARs2, 4;  BAR 3 is n/a */
	bar = dm_pci_map_bar(swap, PCI_BASE_ADDRESS_2, 0, 0, PCI_REGION_TYPE, 0);
	ut_assertnonnull(bar);
	ut_asserteq(PCI_EA_BAR2_MAGIC, *(u32 *)bar);

	bar = dm_pci_map_bar(swap, PCI_BASE_ADDRESS_3, 0, 0, PCI_REGION_TYPE, 0);
	ut_assertnull(bar);

	bar = dm_pci_map_bar(swap, PCI_BASE_ADDRESS_4, 0, 0, PCI_REGION_TYPE, 0);
	ut_assertnonnull(bar);
	ut_asserteq(PCI_EA_BAR4_MAGIC, *(u32 *)bar);

	return 0;
}
DM_TEST(dm_test_pci_ea, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT);

/* Test the dev_read_addr_pci() function */
static int dm_test_pci_addr_flat(struct unit_test_state *uts)
{
	struct udevice *swap1f, *swap1;
	ulong io_addr, mem_addr;
	fdt_addr_t size;

	ut_assertok(dm_pci_bus_find_bdf(PCI_BDF(0, 0x1f, 0), &swap1f));
	io_addr = dm_pci_read_bar32(swap1f, 0);
	ut_asserteq(io_addr, dev_read_addr_pci(swap1f, &size));
	ut_asserteq(0, size);

	/*
	 * This device has both I/O and MEM spaces but the MEM space appears
	 * first
	 */
	ut_assertok(dm_pci_bus_find_bdf(PCI_BDF(0, 0x1, 0), &swap1));
	mem_addr = dm_pci_read_bar32(swap1, 1);
	ut_asserteq(mem_addr, dev_read_addr_pci(swap1, &size));
	ut_asserteq(0, size);

	return 0;
}
DM_TEST(dm_test_pci_addr_flat, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT |
		UT_TESTF_FLAT_TREE);

/*
 * Test the dev_read_addr_pci() function with livetree. That function is
 * not currently fully implemented, in that it fails to return the BAR address.
 * Once that is implemented this test can be removed and dm_test_pci_addr_flat()
 * can be used for both flattree and livetree by removing the UT_TESTF_FLAT_TREE
 * flag above.
 */
static int dm_test_pci_addr_live(struct unit_test_state *uts)
{
	struct udevice *swap1f, *swap1;
	fdt_size_t size;

	ut_assertok(dm_pci_bus_find_bdf(PCI_BDF(0, 0x1f, 0), &swap1f));
	ut_asserteq_64(FDT_ADDR_T_NONE, dev_read_addr_pci(swap1f, &size));
	ut_asserteq(0, size);

	ut_assertok(dm_pci_bus_find_bdf(PCI_BDF(0, 0x1, 0), &swap1));
	ut_asserteq_64(FDT_ADDR_T_NONE, dev_read_addr_pci(swap1, &size));
	ut_asserteq(0, size);

	return 0;
}
DM_TEST(dm_test_pci_addr_live, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT |
		UT_TESTF_LIVE_TREE);

/* Test device_is_on_pci_bus() */
static int dm_test_pci_on_bus(struct unit_test_state *uts)
{
	struct udevice *dev;

	ut_assertok(dm_pci_bus_find_bdf(PCI_BDF(0, 0x1f, 0), &dev));
	ut_asserteq(true, device_is_on_pci_bus(dev));
	ut_asserteq(false, device_is_on_pci_bus(dev_get_parent(dev)));
	ut_asserteq(true, device_is_on_pci_bus(dev));

	return 0;
}
DM_TEST(dm_test_pci_on_bus, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT);

/*
 * Test support for multiple memory regions enabled via
 * CONFIG_PCI_REGION_MULTI_ENTRY. When this feature is not enabled,
 * only the last region of one type is stored. In this test-case,
 * we have 2 memory regions, the first at 0x3000.0000 and the 2nd
 * at 0x3100.0000. A correct test results now in BAR1 located at
 * 0x3000.0000.
 */
static int dm_test_pci_region_multi(struct unit_test_state *uts)
{
	struct udevice *dev;
	ulong mem_addr;

	/* Test memory BAR1 on bus#1 */
	ut_assertok(dm_pci_bus_find_bdf(PCI_BDF(1, 0x08, 0), &dev));
	mem_addr = dm_pci_read_bar32(dev, 1);
	ut_asserteq(mem_addr, 0x30000000);

	return 0;
}
DM_TEST(dm_test_pci_region_multi, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT);

/*
 * Test the translation of PCI bus addresses to physical addresses using the
 * ranges from bus#1.
 */
static int dm_test_pci_bus_to_phys(struct unit_test_state *uts)
{
	unsigned long mask = PCI_REGION_TYPE;
	unsigned long flags = PCI_REGION_MEM;
	struct udevice *dev;
	phys_addr_t phys_addr;

	ut_assertok(dm_pci_bus_find_bdf(PCI_BDF(1, 0x08, 0), &dev));

	/* Before any of the ranges. */
	phys_addr = dm_pci_bus_to_phys(dev, 0x20000000, 0x400, mask, flags);
	ut_asserteq(0, phys_addr);

	/* Identity range: whole, start, mid, end */
	phys_addr = dm_pci_bus_to_phys(dev, 0x2ffff000, 0x2000, mask, flags);
	ut_asserteq(0, phys_addr);
	phys_addr = dm_pci_bus_to_phys(dev, 0x30000000, 0x2000, mask, flags);
	ut_asserteq(0x30000000, phys_addr);
	phys_addr = dm_pci_bus_to_phys(dev, 0x30000000, 0x1000, mask, flags);
	ut_asserteq(0x30000000, phys_addr);
	phys_addr = dm_pci_bus_to_phys(dev, 0x30000abc, 0x12, mask, flags);
	ut_asserteq(0x30000abc, phys_addr);
	phys_addr = dm_pci_bus_to_phys(dev, 0x30000800, 0x1800, mask, flags);
	ut_asserteq(0x30000800, phys_addr);
	phys_addr = dm_pci_bus_to_phys(dev, 0x30008000, 0x1801, mask, flags);
	ut_asserteq(0, phys_addr);

	/* Translated range: whole, start, mid, end */
	phys_addr = dm_pci_bus_to_phys(dev, 0x30fff000, 0x2000, mask, flags);
	ut_asserteq(0, phys_addr);
	phys_addr = dm_pci_bus_to_phys(dev, 0x31000000, 0x2000, mask, flags);
	ut_asserteq(0x3e000000, phys_addr);
	phys_addr = dm_pci_bus_to_phys(dev, 0x31000000, 0x1000, mask, flags);
	ut_asserteq(0x3e000000, phys_addr);
	phys_addr = dm_pci_bus_to_phys(dev, 0x31000abc, 0x12, mask, flags);
	ut_asserteq(0x3e000abc, phys_addr);
	phys_addr = dm_pci_bus_to_phys(dev, 0x31000800, 0x1800, mask, flags);
	ut_asserteq(0x3e000800, phys_addr);
	phys_addr = dm_pci_bus_to_phys(dev, 0x31008000, 0x1801, mask, flags);
	ut_asserteq(0, phys_addr);

	/* Beyond all of the ranges. */
	phys_addr = dm_pci_bus_to_phys(dev, 0x32000000, 0x400, mask, flags);
	ut_asserteq(0, phys_addr);

	return 0;
}
DM_TEST(dm_test_pci_bus_to_phys, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT);

/*
 * Test the translation of physical addresses to PCI bus addresses using the
 * ranges from bus#1.
 */
static int dm_test_pci_phys_to_bus(struct unit_test_state *uts)
{
	unsigned long mask = PCI_REGION_TYPE;
	unsigned long flags = PCI_REGION_MEM;
	struct udevice *dev;
	pci_addr_t pci_addr;

	ut_assertok(dm_pci_bus_find_bdf(PCI_BDF(1, 0x08, 0), &dev));

	/* Before any of the ranges. */
	pci_addr = dm_pci_phys_to_bus(dev, 0x20000000, 0x400, mask, flags);
	ut_asserteq(0, pci_addr);

	/* Identity range: partial overlap, whole, start, mid, end */
	pci_addr = dm_pci_phys_to_bus(dev, 0x2ffff000, 0x2000, mask, flags);
	ut_asserteq(0, pci_addr);
	pci_addr = dm_pci_phys_to_bus(dev, 0x30000000, 0x2000, mask, flags);
	ut_asserteq(0x30000000, pci_addr);
	pci_addr = dm_pci_phys_to_bus(dev, 0x30000000, 0x1000, mask, flags);
	ut_asserteq(0x30000000, pci_addr);
	pci_addr = dm_pci_phys_to_bus(dev, 0x30000abc, 0x12, mask, flags);
	ut_asserteq(0x30000abc, pci_addr);
	pci_addr = dm_pci_phys_to_bus(dev, 0x30000800, 0x1800, mask, flags);
	ut_asserteq(0x30000800, pci_addr);
	pci_addr = dm_pci_phys_to_bus(dev, 0x30008000, 0x1801, mask, flags);
	ut_asserteq(0, pci_addr);

	/* Translated range: partial overlap, whole, start, mid, end */
	pci_addr = dm_pci_phys_to_bus(dev, 0x3dfff000, 0x2000, mask, flags);
	ut_asserteq(0, pci_addr);
	pci_addr = dm_pci_phys_to_bus(dev, 0x3e000000, 0x2000, mask, flags);
	ut_asserteq(0x31000000, pci_addr);
	pci_addr = dm_pci_phys_to_bus(dev, 0x3e000000, 0x1000, mask, flags);
	ut_asserteq(0x31000000, pci_addr);
	pci_addr = dm_pci_phys_to_bus(dev, 0x3e000abc, 0x12, mask, flags);
	ut_asserteq(0x31000abc, pci_addr);
	pci_addr = dm_pci_phys_to_bus(dev, 0x3e000800, 0x1800, mask, flags);
	ut_asserteq(0x31000800, pci_addr);
	pci_addr = dm_pci_phys_to_bus(dev, 0x3e008000, 0x1801, mask, flags);
	ut_asserteq(0, pci_addr);

	/* Beyond all of the ranges. */
	pci_addr = dm_pci_phys_to_bus(dev, 0x3f000000, 0x400, mask, flags);
	ut_asserteq(0, pci_addr);

	return 0;
}
DM_TEST(dm_test_pci_phys_to_bus, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT);