qemu /
seabios /
f501bcbeef616c40125889b657f7ff42eeec8a8d stacks: call check_irqs() in run_thread()
The comment above the yield() function suggests that yield()
allows interrupts for a short time. But yield() only briefly
enables interrupts if seabios was built without CONFIG_THREADS
or if yield() is called from the main thread. In order to
guarantee that the interrupts were enabled once before yield()
returns in a background thread, the main thread must call
check_irqs() before or after every thread switch. The function
run_thread() also switches threads, but the call to check_irqs()
was forgotten. Add the missing check_irqs() call.
This fixes PS/2 keyboard initialization failures.
The code in src/hw/ps2port.c relies on yield() to briefly enable
interrupts. There is a comment above the yield() function in
__ps2_command(), where the author left a remark why the call to
yield() is actually needed.
Here is one of the call sequences leading to a PS/2 keyboard
initialization failure.
ps2_keyboard_setup()
|
ret = i8042_command(I8042_CMD_CTL_TEST, param);
# This command will register an interrupt if the PS/2 device
# controller raises interrupts for replies to a controller
# command.
|
ret = ps2_kbd_command(ATKBD_CMD_RESET_BAT, param);
|
ps2_command(0, command, param);
|
ret = __ps2_command(aux, command, param);
|
// Flush any interrupts already pending.
yield();
# yield() doesn't flush interrupts if the main thread
# hasn't reached wait_threads().
|
ret = ps2_sendbyte(aux, command, 1000);
# Reset the PS/2 keyboard controller and wait for
# PS2_RET_ACK.
|
ret = ps2_recvbyte(aux, 0, 4000);
|
for (;;) {
|
status = inb(PORT_PS2_STATUS);
# I8042_STR_OBF isn't set because the keyboard self
# test reply is still on wire.
|
yield();
# After a few yield()s the keyboard interrupt fires
# and clears the I8042_STR_OBF status bit. If the
# keyboard self test reply arrives before the
# interrupt fires the keyboard reply is lost and
# ps2_recvbyte() returns after the timeout.
}
Signed-off-by: Volker RĂ¼melin <vr_qemu@t-online.de>
1 file changed