| // Initialize PCI devices (on emulators) |
| // |
| // Copyright (C) 2008 Kevin O'Connor <kevin@koconnor.net> |
| // Copyright (C) 2006 Fabrice Bellard |
| // |
| // This file may be distributed under the terms of the GNU LGPLv3 license. |
| |
| #include "byteorder.h" // le64_to_cpu |
| #include "config.h" // CONFIG_* |
| #include "dev-q35.h" // Q35_HOST_BRIDGE_PCIEXBAR_ADDR |
| #include "dev-piix.h" // PIIX_* |
| #include "e820map.h" // e820_add |
| #include "hw/ata.h" // PORT_ATA1_CMD_BASE |
| #include "hw/pci.h" // pci_config_readl |
| #include "hw/pcidevice.h" // pci_probe_devices |
| #include "hw/pci_ids.h" // PCI_VENDOR_ID_INTEL |
| #include "hw/pci_regs.h" // PCI_COMMAND |
| #include "fw/dev-pci.h" // REDHAT_CAP_RESOURCE_RESERVE |
| #include "list.h" // struct hlist_node |
| #include "malloc.h" // free |
| #include "output.h" // dprintf |
| #include "paravirt.h" // RamSize |
| #include "romfile.h" // romfile_loadint |
| #include "string.h" // memset |
| #include "util.h" // pci_setup |
| #include "x86.h" // outb |
| |
| #define PCI_DEVICE_MEM_MIN (1<<12) // 4k == page size |
| #define PCI_BRIDGE_MEM_MIN (1<<21) // 2M == hugepage size |
| #define PCI_BRIDGE_IO_MIN 0x1000 // mandated by pci bridge spec |
| |
| #define PCI_ROM_SLOT 6 |
| #define PCI_NUM_REGIONS 7 |
| #define PCI_BRIDGE_NUM_REGIONS 2 |
| |
| enum pci_region_type { |
| PCI_REGION_TYPE_IO, |
| PCI_REGION_TYPE_MEM, |
| PCI_REGION_TYPE_PREFMEM, |
| PCI_REGION_TYPE_COUNT, |
| }; |
| |
| static const char *region_type_name[] = { |
| [ PCI_REGION_TYPE_IO ] = "io", |
| [ PCI_REGION_TYPE_MEM ] = "mem", |
| [ PCI_REGION_TYPE_PREFMEM ] = "prefmem", |
| }; |
| |
| u64 pcimem_start = BUILD_PCIMEM_START; |
| u64 pcimem_end = BUILD_PCIMEM_END; |
| u64 pcimem64_start = BUILD_PCIMEM64_START; |
| u64 pcimem64_end = BUILD_PCIMEM64_END; |
| u64 pci_io_low_end = 0xa000; |
| |
| struct pci_region_entry { |
| struct pci_device *dev; |
| int bar; |
| u64 size; |
| u64 align; |
| int is64; |
| enum pci_region_type type; |
| struct hlist_node node; |
| }; |
| |
| struct pci_region { |
| /* pci region assignments */ |
| u64 base; |
| struct hlist_head list; |
| }; |
| |
| struct pci_bus { |
| struct pci_region r[PCI_REGION_TYPE_COUNT]; |
| struct pci_device *bus_dev; |
| }; |
| |
| static u32 pci_bar(struct pci_device *pci, int region_num) |
| { |
| if (region_num != PCI_ROM_SLOT) { |
| return PCI_BASE_ADDRESS_0 + region_num * 4; |
| } |
| |
| #define PCI_HEADER_TYPE_MULTI_FUNCTION 0x80 |
| u8 type = pci->header_type & ~PCI_HEADER_TYPE_MULTI_FUNCTION; |
| return type == PCI_HEADER_TYPE_BRIDGE ? PCI_ROM_ADDRESS1 : PCI_ROM_ADDRESS; |
| } |
| |
| static void |
| pci_set_io_region_addr(struct pci_device *pci, int bar, u64 addr, int is64) |
| { |
| u32 ofs = pci_bar(pci, bar); |
| pci_config_writel(pci->bdf, ofs, addr); |
| if (is64) |
| pci_config_writel(pci->bdf, ofs + 4, addr >> 32); |
| } |
| |
| |
| /**************************************************************** |
| * Misc. device init |
| ****************************************************************/ |
| |
| /* host irqs corresponding to PCI irqs A-D */ |
| const u8 pci_irqs[4] = { |
| 10, 10, 11, 11 |
| }; |
| |
| static int dummy_pci_slot_get_irq(struct pci_device *pci, int pin) |
| { |
| dprintf(1, "pci_slot_get_irq called with unknown routing\n"); |
| |
| return 0xff; /* PCI defined "unknown" or "no connection" for x86 */ |
| } |
| |
| static int (*pci_slot_get_irq)(struct pci_device *pci, int pin) = |
| dummy_pci_slot_get_irq; |
| |
| // Return the global irq number corresponding to a host bus device irq pin. |
| static int piix_pci_slot_get_irq(struct pci_device *pci, int pin) |
| { |
| int slot_addend = 0; |
| |
| while (pci->parent != NULL) { |
| slot_addend += pci_bdf_to_dev(pci->bdf); |
| pci = pci->parent; |
| } |
| slot_addend += pci_bdf_to_dev(pci->bdf) - 1; |
| return pci_irqs[(pin - 1 + slot_addend) & 3]; |
| } |
| |
| static int mch_pci_slot_get_irq(struct pci_device *pci, int pin) |
| { |
| int pin_addend = 0; |
| while (pci->parent != NULL) { |
| pin_addend += pci_bdf_to_dev(pci->bdf); |
| pci = pci->parent; |
| } |
| u8 slot = pci_bdf_to_dev(pci->bdf); |
| if (slot <= 24) |
| /* Slots 0-24 rotate slot:pin mapping similar to piix above, but |
| with a different starting index - see q35-acpi-dsdt.dsl */ |
| return pci_irqs[(pin - 1 + pin_addend + slot) & 3]; |
| /* Slots 25-31 all use LNKA mapping (or LNKE, but A:D = E:H) */ |
| return pci_irqs[(pin - 1 + pin_addend) & 3]; |
| } |
| |
| /* PIIX3/PIIX4 PCI to ISA bridge */ |
| static void piix_isa_bridge_setup(struct pci_device *pci, void *arg) |
| { |
| int i, irq; |
| u8 elcr[2]; |
| |
| elcr[0] = 0x00; |
| elcr[1] = 0x00; |
| for (i = 0; i < 4; i++) { |
| irq = pci_irqs[i]; |
| /* set to trigger level */ |
| elcr[irq >> 3] |= (1 << (irq & 7)); |
| /* activate irq remapping in PIIX */ |
| pci_config_writeb(pci->bdf, 0x60 + i, irq); |
| } |
| outb(elcr[0], PIIX_PORT_ELCR1); |
| outb(elcr[1], PIIX_PORT_ELCR2); |
| dprintf(1, "PIIX3/PIIX4 init: elcr=%02x %02x\n", elcr[0], elcr[1]); |
| } |
| |
| static void mch_isa_lpc_setup(u16 bdf) |
| { |
| /* pm io base */ |
| pci_config_writel(bdf, ICH9_LPC_PMBASE, |
| acpi_pm_base | ICH9_LPC_PMBASE_RTE); |
| |
| /* acpi enable, SCI: IRQ9 000b = irq9*/ |
| pci_config_writeb(bdf, ICH9_LPC_ACPI_CTRL, ICH9_LPC_ACPI_CTRL_ACPI_EN); |
| |
| /* set root complex register block BAR */ |
| pci_config_writel(bdf, ICH9_LPC_RCBA, |
| ICH9_LPC_RCBA_ADDR | ICH9_LPC_RCBA_EN); |
| } |
| |
| static int ICH9LpcBDF = -1; |
| |
| /* ICH9 LPC PCI to ISA bridge */ |
| /* PCI_VENDOR_ID_INTEL && PCI_DEVICE_ID_INTEL_ICH9_LPC */ |
| static void mch_isa_bridge_setup(struct pci_device *dev, void *arg) |
| { |
| u16 bdf = dev->bdf; |
| int i, irq; |
| u8 elcr[2]; |
| |
| elcr[0] = 0x00; |
| elcr[1] = 0x00; |
| |
| for (i = 0; i < 4; i++) { |
| irq = pci_irqs[i]; |
| /* set to trigger level */ |
| elcr[irq >> 3] |= (1 << (irq & 7)); |
| |
| /* activate irq remapping in LPC */ |
| |
| /* PIRQ[A-D] routing */ |
| pci_config_writeb(bdf, ICH9_LPC_PIRQA_ROUT + i, irq); |
| /* PIRQ[E-H] routing */ |
| pci_config_writeb(bdf, ICH9_LPC_PIRQE_ROUT + i, irq); |
| } |
| outb(elcr[0], ICH9_LPC_PORT_ELCR1); |
| outb(elcr[1], ICH9_LPC_PORT_ELCR2); |
| dprintf(1, "Q35 LPC init: elcr=%02x %02x\n", elcr[0], elcr[1]); |
| |
| ICH9LpcBDF = bdf; |
| |
| mch_isa_lpc_setup(bdf); |
| |
| e820_add(ICH9_LPC_RCBA_ADDR, 16*1024, E820_RESERVED); |
| |
| acpi_pm1a_cnt = acpi_pm_base + 0x04; |
| pmtimer_setup(acpi_pm_base + 0x08); |
| } |
| |
| static void storage_ide_setup(struct pci_device *pci, void *arg) |
| { |
| /* On parisc, keep PCI IDE IO ports in PCI mem space */ |
| if (CONFIG_PARISC) |
| return; |
| |
| /* IDE: we map it as in ISA mode */ |
| pci_set_io_region_addr(pci, 0, PORT_ATA1_CMD_BASE, 0); |
| pci_set_io_region_addr(pci, 1, PORT_ATA1_CTRL_BASE, 0); |
| pci_set_io_region_addr(pci, 2, PORT_ATA2_CMD_BASE, 0); |
| pci_set_io_region_addr(pci, 3, PORT_ATA2_CTRL_BASE, 0); |
| } |
| |
| /* PIIX3/PIIX4 IDE */ |
| static void piix_ide_setup(struct pci_device *pci, void *arg) |
| { |
| u16 bdf = pci->bdf; |
| pci_config_writew(bdf, 0x40, 0x8000); // enable IDE0 |
| pci_config_writew(bdf, 0x42, 0x8000); // enable IDE1 |
| } |
| |
| static void pic_ibm_setup(struct pci_device *pci, void *arg) |
| { |
| /* PIC, IBM, MPIC & MPIC2 */ |
| pci_set_io_region_addr(pci, 0, 0x80800000 + 0x00040000, 0); |
| } |
| |
| static void apple_macio_setup(struct pci_device *pci, void *arg) |
| { |
| /* macio bridge */ |
| pci_set_io_region_addr(pci, 0, 0x80800000, 0); |
| } |
| |
| static void piix4_pm_config_setup(u16 bdf) |
| { |
| // acpi sci is hardwired to 9 |
| pci_config_writeb(bdf, PCI_INTERRUPT_LINE, 9); |
| |
| pci_config_writel(bdf, PIIX_PMBASE, acpi_pm_base | 1); |
| pci_config_writeb(bdf, PIIX_PMREGMISC, 0x01); /* enable PM io space */ |
| pci_config_writel(bdf, PIIX_SMBHSTBASE, (acpi_pm_base + 0x100) | 1); |
| pci_config_writeb(bdf, PIIX_SMBHSTCFG, 0x09); /* enable SMBus io space */ |
| } |
| |
| static int PiixPmBDF = -1; |
| |
| /* PIIX4 Power Management device (for ACPI) */ |
| static void piix4_pm_setup(struct pci_device *pci, void *arg) |
| { |
| PiixPmBDF = pci->bdf; |
| piix4_pm_config_setup(pci->bdf); |
| |
| acpi_pm1a_cnt = acpi_pm_base + 0x04; |
| pmtimer_setup(acpi_pm_base + 0x08); |
| } |
| |
| static void ich9_smbus_enable(u16 bdf) |
| { |
| /* map smbus into io space */ |
| pci_config_writel(bdf, ICH9_SMB_SMB_BASE, |
| (acpi_pm_base + 0x100) | PCI_BASE_ADDRESS_SPACE_IO); |
| |
| /* enable SMBus */ |
| pci_config_writeb(bdf, ICH9_SMB_HOSTC, ICH9_SMB_HOSTC_HST_EN); |
| } |
| |
| static int ICH9SmbusBDF = -1; |
| |
| /* ICH9 SMBUS */ |
| /* PCI_VENDOR_ID_INTEL && PCI_DEVICE_ID_INTEL_ICH9_SMBUS */ |
| static void ich9_smbus_setup(struct pci_device *dev, void *arg) |
| { |
| ICH9SmbusBDF = dev->bdf; |
| |
| ich9_smbus_enable(dev->bdf); |
| } |
| |
| static void intel_igd_setup(struct pci_device *dev, void *arg) |
| { |
| struct romfile_s *opregion = romfile_find("etc/igd-opregion"); |
| u64 bdsm_size = le64_to_cpu(romfile_loadint("etc/igd-bdsm-size", 0)); |
| |
| /* Apply OpRegion to any Intel VGA device, more than one is undefined */ |
| if (opregion && opregion->size) { |
| void *addr = memalign_high(PAGE_SIZE, opregion->size); |
| if (!addr) { |
| warn_noalloc(); |
| return; |
| } |
| |
| if (opregion->copy(opregion, addr, opregion->size) < 0) { |
| free(addr); |
| return; |
| } |
| |
| pci_config_writel(dev->bdf, 0xFC, cpu_to_le32((u32)addr)); |
| |
| dprintf(1, "Intel IGD OpRegion enabled at 0x%08x, size %dKB, dev %pP\n" |
| , (u32)addr, opregion->size >> 10, dev); |
| } |
| |
| /* Apply BDSM only to Intel VGA at 00:02.0 */ |
| if (bdsm_size && (dev->bdf == pci_to_bdf(0, 2, 0))) { |
| void *addr = memalign_tmphigh(1024 * 1024, bdsm_size); |
| if (!addr) { |
| warn_noalloc(); |
| return; |
| } |
| |
| e820_add((u32)addr, bdsm_size, E820_RESERVED); |
| |
| pci_config_writel(dev->bdf, 0x5C, cpu_to_le32((u32)addr)); |
| |
| dprintf(1, "Intel IGD BDSM enabled at 0x%08x, size %lldMB, dev %pP\n" |
| , (u32)addr, bdsm_size >> 20, dev); |
| } |
| } |
| |
| static const struct pci_device_id pci_device_tbl[] = { |
| /* PIIX3/PIIX4 PCI to ISA bridge */ |
| PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, |
| piix_isa_bridge_setup), |
| PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0, |
| piix_isa_bridge_setup), |
| PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_LPC, |
| mch_isa_bridge_setup), |
| |
| /* STORAGE IDE */ |
| PCI_DEVICE_CLASS(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_1, |
| PCI_CLASS_STORAGE_IDE, piix_ide_setup), |
| PCI_DEVICE_CLASS(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB, |
| PCI_CLASS_STORAGE_IDE, piix_ide_setup), |
| PCI_DEVICE_CLASS(PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE, |
| storage_ide_setup), |
| |
| /* PIC, IBM, MPIC & MPIC2 */ |
| PCI_DEVICE_CLASS(PCI_VENDOR_ID_IBM, 0x0046, PCI_CLASS_SYSTEM_PIC, |
| pic_ibm_setup), |
| PCI_DEVICE_CLASS(PCI_VENDOR_ID_IBM, 0xFFFF, PCI_CLASS_SYSTEM_PIC, |
| pic_ibm_setup), |
| |
| /* PIIX4 Power Management device (for ACPI) */ |
| PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, |
| piix4_pm_setup), |
| PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_SMBUS, |
| ich9_smbus_setup), |
| |
| /* 0xff00 */ |
| PCI_DEVICE_CLASS(PCI_VENDOR_ID_APPLE, 0x0017, 0xff00, apple_macio_setup), |
| PCI_DEVICE_CLASS(PCI_VENDOR_ID_APPLE, 0x0022, 0xff00, apple_macio_setup), |
| |
| /* Intel IGD OpRegion setup */ |
| PCI_DEVICE_CLASS(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA, |
| intel_igd_setup), |
| |
| PCI_DEVICE_END, |
| }; |
| |
| static int MCHMmcfgBDF = -1; |
| static void mch_mmconfig_setup(u16 bdf); |
| |
| void pci_resume(void) |
| { |
| if (!CONFIG_QEMU) { |
| return; |
| } |
| |
| if (PiixPmBDF >= 0) { |
| piix4_pm_config_setup(PiixPmBDF); |
| } |
| |
| if (ICH9LpcBDF >= 0) { |
| mch_isa_lpc_setup(ICH9LpcBDF); |
| } |
| |
| if (ICH9SmbusBDF >= 0) { |
| ich9_smbus_enable(ICH9SmbusBDF); |
| } |
| |
| if(MCHMmcfgBDF >= 0) { |
| mch_mmconfig_setup(MCHMmcfgBDF); |
| } |
| } |
| |
| static void pci_bios_init_device(struct pci_device *pci) |
| { |
| dprintf(1, "PCI: init bdf=%pP id=%04x:%04x\n" |
| , pci, pci->vendor, pci->device); |
| |
| /* map the interrupt */ |
| u16 bdf = pci->bdf; |
| int pin = pci_config_readb(bdf, PCI_INTERRUPT_PIN); |
| if (pin != 0) |
| pci_config_writeb(bdf, PCI_INTERRUPT_LINE, pci_slot_get_irq(pci, pin)); |
| |
| pci_init_device(pci_device_tbl, pci, NULL); |
| |
| /* enable memory mappings */ |
| pci_config_maskw(bdf, PCI_COMMAND, 0, |
| PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_SERR); |
| /* enable SERR# for forwarding */ |
| if (pci->header_type & PCI_HEADER_TYPE_BRIDGE) |
| pci_config_maskw(bdf, PCI_BRIDGE_CONTROL, 0, |
| PCI_BRIDGE_CTL_SERR); |
| } |
| |
| static void pci_bios_init_devices(void) |
| { |
| struct pci_device *pci; |
| foreachpci(pci) { |
| pci_bios_init_device(pci); |
| } |
| } |
| |
| static void pci_enable_default_vga(void) |
| { |
| struct pci_device *pci; |
| |
| foreachpci(pci) { |
| if (is_pci_vga(pci)) { |
| dprintf(1, "PCI: Using %pP for primary VGA\n", pci); |
| return; |
| } |
| } |
| |
| pci = pci_find_class(PCI_CLASS_DISPLAY_VGA); |
| if (!pci) { |
| dprintf(1, "PCI: No VGA devices found\n"); |
| return; |
| } |
| |
| dprintf(1, "PCI: Enabling %pP for primary VGA\n", pci); |
| |
| pci_config_maskw(pci->bdf, PCI_COMMAND, 0, |
| PCI_COMMAND_IO | PCI_COMMAND_MEMORY); |
| |
| while (pci->parent) { |
| pci = pci->parent; |
| |
| dprintf(1, "PCI: Setting VGA enable on bridge %pP\n", pci); |
| |
| pci_config_maskw(pci->bdf, PCI_BRIDGE_CONTROL, 0, PCI_BRIDGE_CTL_VGA); |
| pci_config_maskw(pci->bdf, PCI_COMMAND, 0, |
| PCI_COMMAND_IO | PCI_COMMAND_MEMORY); |
| } |
| } |
| |
| /**************************************************************** |
| * Platform device initialization |
| ****************************************************************/ |
| |
| static void i440fx_mem_addr_setup(struct pci_device *dev, void *arg) |
| { |
| if (RamSize <= 0x80000000) |
| pcimem_start = 0x80000000; |
| else if (RamSize <= 0xc0000000) |
| pcimem_start = 0xc0000000; |
| |
| pci_slot_get_irq = piix_pci_slot_get_irq; |
| } |
| |
| static void mch_mmconfig_setup(u16 bdf) |
| { |
| u64 addr = Q35_HOST_BRIDGE_PCIEXBAR_ADDR; |
| u32 upper = addr >> 32; |
| u32 lower = (addr & 0xffffffff) | Q35_HOST_BRIDGE_PCIEXBAREN; |
| pci_config_writel(bdf, Q35_HOST_BRIDGE_PCIEXBAR, 0); |
| pci_config_writel(bdf, Q35_HOST_BRIDGE_PCIEXBAR + 4, upper); |
| pci_config_writel(bdf, Q35_HOST_BRIDGE_PCIEXBAR, lower); |
| pci_enable_mmconfig(Q35_HOST_BRIDGE_PCIEXBAR_ADDR, "q35"); |
| } |
| |
| static void mch_mem_addr_setup(struct pci_device *dev, void *arg) |
| { |
| u64 addr = Q35_HOST_BRIDGE_PCIEXBAR_ADDR; |
| u32 size = Q35_HOST_BRIDGE_PCIEXBAR_SIZE; |
| |
| /* setup mmconfig */ |
| MCHMmcfgBDF = dev->bdf; |
| mch_mmconfig_setup(dev->bdf); |
| e820_add(addr, size, E820_RESERVED); |
| |
| /* setup pci i/o window (above mmconfig) */ |
| pcimem_start = addr + size; |
| |
| pci_slot_get_irq = mch_pci_slot_get_irq; |
| |
| /* setup io address space */ |
| if (acpi_pm_base < 0x1000) |
| pci_io_low_end = 0x10000; |
| else |
| pci_io_low_end = acpi_pm_base; |
| } |
| |
| /* |
| * parisc: If mmio bar is bigger than this size, map the bar it into the |
| * directed ELMMIO instead of the distributed LMMIO region. |
| */ |
| #define PARISC_MMIO_LIMIT 0x40000 |
| |
| #if CONFIG_PARISC |
| static int dino_pci_slot_get_irq(struct pci_device *pci, int pin) |
| { |
| int slot = pci_bdf_to_dev(pci->bdf); |
| return slot & 0x03; |
| } |
| |
| static void dino_mem_addr_setup(struct pci_device *dev, void *arg) |
| { |
| pcimem_start = 0xf2000000ULL; |
| pcimem_end = 0xff800000ULL; |
| |
| if (has_astro || sizeof(long) != 4) |
| return; |
| |
| /* Setup DINO PCI I/O and mem window */ |
| |
| outl(DINO_HPA | 1, 0xfffc0020); /* Set Dino Flex (Address) */ |
| outl(0x00000080, DINO_HPA + 0x038); /* IO_CONTROL - enable DINO PCI */ |
| // outl(0x00000000, DINO_HPA + 0x804); /* Set PAMR */ |
| // outl(0x00000000, DINO_HPA + 0x808); /* Set PAPR */ |
| outl(0x7ffffffe, DINO_HPA + 0x060); /* Set DINO_IO_ADDR_EN */ |
| // outl(0x00000001, DINO_HPA + 0x05c); /* Set IO_FBB_EN */ |
| // outl(0x0000006f, DINO_HPA + 0x810); /* Set PCICMD */ |
| |
| pci_slot_get_irq = dino_pci_slot_get_irq; |
| |
| /* setup io address space */ |
| pci_io_low_end = 0xa000; |
| } |
| |
| static int astro_pci_slot_get_irq(struct pci_device *pci, int pin) |
| { |
| int bus = pci_bdf_to_bus(pci->bdf); |
| int slot = pci_bdf_to_dev(pci->bdf); |
| return (bus + 1) * 4 + (slot & 0x03); |
| } |
| |
| static void astro_mem_addr_setup(struct pci_device *dev, void *arg) |
| { |
| pcimem_start = LMMIO_DIST_BASE_ADDR; |
| pcimem_end = pcimem_start + LMMIO_DIST_BASE_SIZE / ROPES_PER_IOC; |
| |
| MaxPCIBus = 4; |
| pci_slot_get_irq = astro_pci_slot_get_irq; |
| |
| /* setup io address space */ |
| pci_io_low_end = IOS_DIST_BASE_SIZE / ROPES_PER_IOC; |
| } |
| |
| static void parisc_mem_addr_setup(struct pci_device *dev, void *arg) |
| { |
| if (has_astro) |
| return astro_mem_addr_setup(dev, arg); |
| else |
| return dino_mem_addr_setup(dev, arg); |
| } |
| #endif /* CONFIG_PARISC */ |
| |
| static unsigned long add_lmmio_directed_range(unsigned long size, int rope) |
| { |
| #ifdef CONFIG_PARISC |
| int i; |
| |
| /* Astro has 4 directed ranges. */ |
| for (i = 0; i < 4; i++) { |
| unsigned long addr; |
| void *reg = (void *)(unsigned long) (ASTRO_BASE_HPA + i * 0x18); |
| |
| addr = readl(reg + LMMIO_DIRECT0_BASE); |
| if (addr & 1) |
| continue; /* already used */ |
| |
| /* fixme for multiple addresses */ |
| /* Linux driver currently only allows one distr. range per IOC */ |
| addr = 0xfa000000; /* graphics card area for parisc, f8 is used by artist */ |
| addr += i * 0x02000000; |
| |
| writel(reg + LMMIO_DIRECT0_BASE, addr | 1); |
| writel(reg + LMMIO_DIRECT0_ROUTE, rope & (ROPES_PER_IOC - 1)); |
| size = 0xfff8000000 | ~(size-1); /* is -1 correct? */ |
| // dprintf(1, "use addr %lx size %lx\n", addr|1, size); |
| writel(reg + LMMIO_DIRECT0_MASK, size); |
| return addr; |
| } |
| #endif /* CONFIG_PARISC */ |
| return -1UL; |
| } |
| |
| static const struct pci_device_id pci_platform_tbl[] = { |
| PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, |
| i440fx_mem_addr_setup), |
| PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_Q35_MCH, |
| mch_mem_addr_setup), |
| PCI_DEVICE_END |
| }; |
| |
| static void pci_bios_init_platform(void) |
| { |
| struct pci_device *pci; |
| |
| if (CONFIG_X86) { |
| foreachpci(pci) { |
| pci_init_device(pci_platform_tbl, pci, NULL); |
| } |
| } |
| |
| #if CONFIG_PARISC |
| parisc_mem_addr_setup(NULL, NULL); |
| #endif |
| } |
| |
| static u8 pci_find_resource_reserve_capability(u16 bdf) |
| { |
| u16 device_id; |
| |
| if (pci_config_readw(bdf, PCI_VENDOR_ID) != PCI_VENDOR_ID_REDHAT) { |
| dprintf(3, "PCI: This is non-QEMU bridge.\n"); |
| return 0; |
| } |
| |
| device_id = pci_config_readw(bdf, PCI_DEVICE_ID); |
| |
| if (device_id != PCI_DEVICE_ID_REDHAT_ROOT_PORT && |
| device_id != PCI_DEVICE_ID_REDHAT_BRIDGE) { |
| dprintf(1, "PCI: QEMU resource reserve cap device ID doesn't match.\n"); |
| return 0; |
| } |
| u8 cap = 0; |
| |
| do { |
| cap = pci_find_capability(bdf, PCI_CAP_ID_VNDR, cap); |
| } while (cap && |
| pci_config_readb(bdf, cap + PCI_CAP_REDHAT_TYPE_OFFSET) != |
| REDHAT_CAP_RESOURCE_RESERVE); |
| if (cap) { |
| u8 cap_len = pci_config_readb(bdf, cap + PCI_CAP_FLAGS); |
| if (cap_len < RES_RESERVE_CAP_SIZE) { |
| dprintf(1, "PCI: QEMU resource reserve cap length %d is invalid\n", |
| cap_len); |
| return 0; |
| } |
| } else { |
| dprintf(1, "PCI: QEMU resource reserve cap not found\n"); |
| } |
| return cap; |
| } |
| |
| /**************************************************************** |
| * Bus initialization |
| ****************************************************************/ |
| |
| static void |
| pci_bios_init_bus_rec(int bus, u8 *pci_bus) |
| { |
| int bdf; |
| u16 class; |
| |
| // dprintf(1, "PCI: %s bus = 0x%x\n", __func__, bus); |
| |
| /* prevent accidental access to unintended devices */ |
| foreachbdf(bdf, bus) { |
| class = pci_config_readw(bdf, PCI_CLASS_DEVICE); |
| if (class == PCI_CLASS_BRIDGE_PCI) { |
| pci_config_writeb(bdf, PCI_SECONDARY_BUS, 255); |
| pci_config_writeb(bdf, PCI_SUBORDINATE_BUS, 0); |
| } |
| } |
| |
| foreachbdf(bdf, bus) { |
| class = pci_config_readw(bdf, PCI_CLASS_DEVICE); |
| if (class != PCI_CLASS_BRIDGE_PCI) { |
| continue; |
| } |
| dprintf(1, "PCI: %s bdf = 0x%x\n", __func__, bdf); |
| |
| u8 pribus = pci_config_readb(bdf, PCI_PRIMARY_BUS); |
| if (pribus != bus) { |
| dprintf(1, "PCI: primary bus = 0x%x -> 0x%x\n", pribus, bus); |
| pci_config_writeb(bdf, PCI_PRIMARY_BUS, bus); |
| } else { |
| dprintf(1, "PCI: primary bus = 0x%x\n", pribus); |
| } |
| |
| u8 secbus = pci_config_readb(bdf, PCI_SECONDARY_BUS); |
| (*pci_bus)++; |
| if (*pci_bus != secbus) { |
| dprintf(1, "PCI: secondary bus = 0x%x -> 0x%x\n", |
| secbus, *pci_bus); |
| secbus = *pci_bus; |
| pci_config_writeb(bdf, PCI_SECONDARY_BUS, secbus); |
| } else { |
| dprintf(1, "PCI: secondary bus = 0x%x\n", secbus); |
| } |
| |
| /* set to max for access to all subordinate buses. |
| later set it to accurate value */ |
| u8 subbus = pci_config_readb(bdf, PCI_SUBORDINATE_BUS); |
| pci_config_writeb(bdf, PCI_SUBORDINATE_BUS, 255); |
| |
| pci_bios_init_bus_rec(secbus, pci_bus); |
| |
| if (subbus != *pci_bus) { |
| u8 res_bus = *pci_bus; |
| u8 cap = pci_find_resource_reserve_capability(bdf); |
| |
| if (cap) { |
| u32 tmp_res_bus = pci_config_readl(bdf, |
| cap + RES_RESERVE_BUS_RES); |
| if (tmp_res_bus != (u32)-1) { |
| res_bus = tmp_res_bus & 0xFF; |
| if ((u8)(res_bus + secbus) < secbus || |
| (u8)(res_bus + secbus) < res_bus) { |
| dprintf(1, "PCI: bus_reserve value %d is invalid\n", |
| res_bus); |
| res_bus = 0; |
| } |
| if (secbus + res_bus > *pci_bus) { |
| dprintf(1, "PCI: QEMU resource reserve cap: bus = %u\n", |
| res_bus); |
| res_bus = secbus + res_bus; |
| } |
| } |
| } |
| dprintf(1, "PCI: subordinate bus = 0x%x -> 0x%x\n", |
| subbus, res_bus); |
| subbus = res_bus; |
| *pci_bus = res_bus; |
| } else { |
| dprintf(1, "PCI: subordinate bus = 0x%x\n", subbus); |
| } |
| pci_config_writeb(bdf, PCI_SUBORDINATE_BUS, subbus); |
| } |
| } |
| |
| static void |
| pci_bios_init_bus(void) |
| { |
| u8 extraroots = romfile_loadint("etc/extra-pci-roots", 0); |
| u8 pci_bus = 0; |
| |
| pci_bios_init_bus_rec(0 /* host bus */, &pci_bus); |
| |
| if (extraroots) { |
| while (pci_bus < 0xff) { |
| pci_bus++; |
| pci_bios_init_bus_rec(pci_bus, &pci_bus); |
| } |
| } |
| } |
| |
| |
| /**************************************************************** |
| * Bus sizing |
| ****************************************************************/ |
| |
| static void |
| pci_bios_get_bar(struct pci_device *pci, int bar, |
| int *ptype, u64 *psize, int *pis64) |
| { |
| u32 ofs = pci_bar(pci, bar); |
| u16 bdf = pci->bdf; |
| u32 old = pci_config_readl(bdf, ofs); |
| int is64 = 0, type = PCI_REGION_TYPE_MEM; |
| u64 mask; |
| |
| if (bar == PCI_ROM_SLOT) { |
| mask = PCI_ROM_ADDRESS_MASK; |
| pci_config_writel(bdf, ofs, mask); |
| } else { |
| if (old & PCI_BASE_ADDRESS_SPACE_IO) { |
| mask = PCI_BASE_ADDRESS_IO_MASK; |
| type = PCI_REGION_TYPE_IO; |
| } else { |
| mask = PCI_BASE_ADDRESS_MEM_MASK; |
| if (old & PCI_BASE_ADDRESS_MEM_PREFETCH) |
| type = PCI_REGION_TYPE_PREFMEM; |
| is64 = ((old & PCI_BASE_ADDRESS_MEM_TYPE_MASK) |
| == PCI_BASE_ADDRESS_MEM_TYPE_64); |
| } |
| pci_config_writel(bdf, ofs, ~0); |
| } |
| u64 val = pci_config_readl(bdf, ofs); |
| pci_config_writel(bdf, ofs, old); |
| if (is64) { |
| u32 hold = pci_config_readl(bdf, ofs + 4); |
| pci_config_writel(bdf, ofs + 4, ~0); |
| u32 high = pci_config_readl(bdf, ofs + 4); |
| pci_config_writel(bdf, ofs + 4, hold); |
| val |= ((u64)high << 32); |
| mask |= ((u64)0xffffffff << 32); |
| *psize = (~(val & mask)) + 1; |
| } else { |
| *psize = ((~(val & mask)) + 1) & 0xffffffff; |
| } |
| *ptype = type; |
| *pis64 = is64; |
| } |
| |
| static int pci_bios_bridge_region_is64(struct pci_region *r, |
| struct pci_device *pci, int type) |
| { |
| if (type != PCI_REGION_TYPE_PREFMEM) |
| return 0; |
| u32 pmem = pci_config_readl(pci->bdf, PCI_PREF_MEMORY_BASE); |
| if (!pmem) { |
| pci_config_writel(pci->bdf, PCI_PREF_MEMORY_BASE, 0xfff0fff0); |
| pmem = pci_config_readl(pci->bdf, PCI_PREF_MEMORY_BASE); |
| pci_config_writel(pci->bdf, PCI_PREF_MEMORY_BASE, 0x0); |
| } |
| if ((pmem & PCI_PREF_RANGE_TYPE_MASK) != PCI_PREF_RANGE_TYPE_64) |
| return 0; |
| struct pci_region_entry *entry; |
| hlist_for_each_entry(entry, &r->list, node) { |
| if (!entry->is64) |
| return 0; |
| } |
| return 1; |
| } |
| |
| static u64 pci_region_align(struct pci_region *r) |
| { |
| struct pci_region_entry *entry; |
| hlist_for_each_entry(entry, &r->list, node) { |
| // The first entry in the sorted list has the largest alignment |
| return entry->align; |
| } |
| return 1; |
| } |
| |
| static u64 pci_region_sum(struct pci_region *r) |
| { |
| u64 sum = 0; |
| struct pci_region_entry *entry; |
| hlist_for_each_entry(entry, &r->list, node) { |
| if (entry->size <= PARISC_MMIO_LIMIT && CONFIG_PARISC) |
| sum += entry->size; |
| } |
| return sum; |
| } |
| |
| static void pci_region_migrate_64bit_entries(struct pci_region *from, |
| struct pci_region *to) |
| { |
| struct hlist_node *n, **last = &to->list.first; |
| struct pci_region_entry *entry; |
| hlist_for_each_entry_safe(entry, n, &from->list, node) { |
| if (!entry->is64) |
| continue; |
| if (entry->dev->class == PCI_CLASS_SERIAL_USB) |
| continue; |
| // Move from source list to destination list. |
| hlist_del(&entry->node); |
| hlist_add(&entry->node, last); |
| last = &entry->node.next; |
| } |
| } |
| |
| static struct pci_region_entry * |
| pci_region_create_entry(struct pci_bus *bus, struct pci_device *dev, |
| int bar, u64 size, u64 align, int type, int is64) |
| { |
| struct pci_region_entry *entry = malloc_tmp(sizeof(*entry)); |
| if (!entry) { |
| warn_noalloc(); |
| return NULL; |
| } |
| memset(entry, 0, sizeof(*entry)); |
| entry->dev = dev; |
| entry->bar = bar; |
| entry->size = size; |
| entry->align = align; |
| entry->is64 = is64; |
| entry->type = type; |
| // Insert into list in sorted order. |
| struct hlist_node **pprev; |
| struct pci_region_entry *pos; |
| hlist_for_each_entry_pprev(pos, pprev, &bus->r[type].list, node) { |
| if (pos->align < align || (pos->align == align && pos->size < size)) |
| break; |
| } |
| hlist_add(&entry->node, pprev); |
| return entry; |
| } |
| |
| static int pci_bus_hotplug_support(struct pci_bus *bus, u8 pcie_cap) |
| { |
| u8 shpc_cap; |
| |
| if (pcie_cap) { |
| u16 pcie_flags = pci_config_readw(bus->bus_dev->bdf, |
| pcie_cap + PCI_EXP_FLAGS); |
| u8 port_type = ((pcie_flags & PCI_EXP_FLAGS_TYPE) >> |
| (__builtin_ffs(PCI_EXP_FLAGS_TYPE) - 1)); |
| u8 downstream_port = (port_type == PCI_EXP_TYPE_DOWNSTREAM) || |
| (port_type == PCI_EXP_TYPE_ROOT_PORT); |
| /* |
| * PCI Express SPEC, 7.8.2: |
| * Slot Implemented – When Set, this bit indicates that the Link |
| * HwInit associated with this Port is connected to a slot (as |
| * compared to being connected to a system-integrated device or |
| * being disabled). |
| * This bit is valid for Downstream Ports. This bit is undefined |
| * for Upstream Ports. |
| */ |
| u16 slot_implemented = pcie_flags & PCI_EXP_FLAGS_SLOT; |
| |
| return downstream_port && slot_implemented; |
| } |
| |
| shpc_cap = pci_find_capability(bus->bus_dev->bdf, PCI_CAP_ID_SHPC, 0); |
| return !!shpc_cap; |
| } |
| |
| /* Test whether bridge support forwarding of transactions |
| * of a specific type. |
| * Note: disables bridge's window registers as a side effect. |
| */ |
| static int pci_bridge_has_region(struct pci_device *pci, |
| enum pci_region_type region_type) |
| { |
| u8 base; |
| |
| switch (region_type) { |
| case PCI_REGION_TYPE_IO: |
| base = PCI_IO_BASE; |
| break; |
| case PCI_REGION_TYPE_PREFMEM: |
| base = PCI_PREF_MEMORY_BASE; |
| break; |
| default: |
| /* Regular memory support is mandatory */ |
| return 1; |
| } |
| |
| pci_config_writeb(pci->bdf, base, 0xFF); |
| |
| return pci_config_readb(pci->bdf, base) != 0; |
| } |
| |
| static int pci_bios_check_devices(struct pci_bus *busses) |
| { |
| dprintf(1, "PCI: check devices\n"); |
| |
| // Calculate resources needed for regular (non-bus) devices. |
| struct pci_device *pci; |
| foreachpci(pci) { |
| if (pci->class == PCI_CLASS_BRIDGE_PCI) |
| busses[pci->secondary_bus].bus_dev = pci; |
| |
| struct pci_bus *bus = &busses[pci_bdf_to_bus(pci->bdf)]; |
| if (!bus->bus_dev && !CONFIG_PARISC) |
| /* |
| * Resources for all root busses go in busses[0] |
| */ |
| bus = &busses[0]; |
| int i; |
| for (i = 0; i < PCI_NUM_REGIONS; i++) { |
| if ((pci->class == PCI_CLASS_BRIDGE_PCI) && |
| (i >= PCI_BRIDGE_NUM_REGIONS && i < PCI_ROM_SLOT)) |
| continue; |
| int type, is64; |
| u64 size; |
| pci_bios_get_bar(pci, i, &type, &size, &is64); |
| if (size == 0) |
| continue; |
| |
| if (type != PCI_REGION_TYPE_IO && size < PCI_DEVICE_MEM_MIN) |
| size = PCI_DEVICE_MEM_MIN; |
| struct pci_region_entry *entry = pci_region_create_entry( |
| bus, pci, i, size, size, type, is64); |
| if (!entry) |
| return -1; |
| |
| if (is64) |
| i++; |
| } |
| } |
| |
| // Propagate required bus resources to parent busses. |
| int secondary_bus; |
| for (secondary_bus=MaxPCIBus; secondary_bus>0; secondary_bus--) { |
| struct pci_bus *s = &busses[secondary_bus]; |
| if (!s->bus_dev) |
| continue; |
| struct pci_bus *parent = &busses[pci_bdf_to_bus(s->bus_dev->bdf)]; |
| if (!parent->bus_dev) |
| /* |
| * Resources for all root busses go in busses[0] |
| */ |
| parent = &busses[0]; |
| int type; |
| u16 bdf = s->bus_dev->bdf; |
| u8 pcie_cap = pci_find_capability(bdf, PCI_CAP_ID_EXP, 0); |
| u8 qemu_cap = pci_find_resource_reserve_capability(bdf); |
| |
| int hotplug_support = pci_bus_hotplug_support(s, pcie_cap); |
| for (type = 0; type < PCI_REGION_TYPE_COUNT; type++) { |
| u64 align = (type == PCI_REGION_TYPE_IO) ? |
| PCI_BRIDGE_IO_MIN : PCI_BRIDGE_MEM_MIN; |
| if (!pci_bridge_has_region(s->bus_dev, type)) |
| continue; |
| u64 size = 0; |
| if (qemu_cap) { |
| u32 tmp_size; |
| u64 tmp_size_64; |
| switch(type) { |
| case PCI_REGION_TYPE_IO: |
| tmp_size_64 = (pci_config_readl(bdf, qemu_cap + RES_RESERVE_IO) | |
| (u64)pci_config_readl(bdf, qemu_cap + RES_RESERVE_IO + 4) << 32); |
| if (tmp_size_64 != (u64)-1) { |
| size = tmp_size_64; |
| } |
| break; |
| case PCI_REGION_TYPE_MEM: |
| tmp_size = pci_config_readl(bdf, qemu_cap + RES_RESERVE_MEM); |
| if (tmp_size != (u32)-1) { |
| size = tmp_size; |
| } |
| break; |
| case PCI_REGION_TYPE_PREFMEM: |
| tmp_size = pci_config_readl(bdf, qemu_cap + RES_RESERVE_PREF_MEM_32); |
| tmp_size_64 = (pci_config_readl(bdf, qemu_cap + RES_RESERVE_PREF_MEM_64) | |
| (u64)pci_config_readl(bdf, qemu_cap + RES_RESERVE_PREF_MEM_64 + 4) << 32); |
| if (tmp_size != (u32)-1 && tmp_size_64 == (u64)-1) { |
| size = tmp_size; |
| } else if (tmp_size == (u32)-1 && tmp_size_64 != (u64)-1) { |
| size = tmp_size_64; |
| } else if (tmp_size != (u32)-1 && tmp_size_64 != (u64)-1) { |
| dprintf(1, "PCI: resource reserve cap PREF32 and PREF64" |
| " conflict\n"); |
| } |
| break; |
| default: |
| break; |
| } |
| } |
| if (pci_region_align(&s->r[type]) > align) |
| align = pci_region_align(&s->r[type]); |
| u64 sum = pci_region_sum(&s->r[type]); |
| int resource_optional = pcie_cap && (type == PCI_REGION_TYPE_IO); |
| if (!sum && hotplug_support && !resource_optional) |
| sum = align; /* reserve min size for hot-plug */ |
| if (size > sum) { |
| dprintf(1, "PCI: QEMU resource reserve cap: " |
| "size %08llx type %s\n", |
| size, region_type_name[type]); |
| if (type != PCI_REGION_TYPE_IO) { |
| size = ALIGN(size, align); |
| } |
| } else { |
| size = ALIGN(sum, align); |
| } |
| int is64 = pci_bios_bridge_region_is64(&s->r[type], |
| s->bus_dev, type); |
| // entry->bar is -1 if the entry represents a bridge region |
| struct pci_region_entry *entry = pci_region_create_entry( |
| parent, s->bus_dev, -1, size, align, type, is64); |
| if (!entry) |
| return -1; |
| dprintf(1, "PCI: secondary bus %d size %08llx type %s\n", |
| entry->dev->secondary_bus, size, |
| region_type_name[entry->type]); |
| } |
| } |
| return 0; |
| } |
| |
| |
| /**************************************************************** |
| * BAR assignment |
| ****************************************************************/ |
| |
| // Setup region bases (given the regions' size and alignment) |
| static int pci_bios_init_root_regions_io(struct pci_bus *bus) |
| { |
| /* |
| * QEMU I/O address space usage: |
| * 0000 - 0fff legacy isa, pci config, pci root bus, ... |
| * 1000 - 9fff free |
| * a000 - afff hotplug (cpu, pci via acpi, i440fx/piix only) |
| * b000 - bfff power management (PORT_ACPI_PM_BASE) |
| * [ qemu 1.4+ implements pci config registers |
| * properly so guests can place the registers |
| * where they want, on older versions its fixed ] |
| * c000 - ffff free, traditionally used for pci io |
| */ |
| struct pci_region *r_io = &bus->r[PCI_REGION_TYPE_IO]; |
| u64 sum = pci_region_sum(r_io); |
| if (sum < 0x4000 && !CONFIG_PARISC) { |
| /* traditional region is big enough, use it */ |
| r_io->base = 0xc000; |
| } else if (sum < pci_io_low_end - 0x1000) { |
| /* use the larger region at 0x1000 */ |
| r_io->base = 0x1000; |
| } else { |
| /* not enouth io address space -> error out */ |
| return -1; |
| } |
| dprintf(1, "PCI: IO: %4llx - %4llx\n", r_io->base, r_io->base + sum - 1); |
| return 0; |
| } |
| |
| static int pci_bios_init_root_regions_mem(struct pci_bus *bus) |
| { |
| struct pci_region *r_end = &bus->r[PCI_REGION_TYPE_PREFMEM]; |
| struct pci_region *r_start = &bus->r[PCI_REGION_TYPE_MEM]; |
| |
| if (pci_region_align(r_start) < pci_region_align(r_end)) { |
| // Swap regions to improve alignment. |
| r_end = r_start; |
| r_start = &bus->r[PCI_REGION_TYPE_PREFMEM]; |
| } |
| u64 sum = pci_region_sum(r_end); |
| u64 align = pci_region_align(r_end); |
| r_end->base = ALIGN_DOWN((pcimem_end - sum), align); |
| sum = pci_region_sum(r_start); |
| align = pci_region_align(r_start); |
| r_start->base = ALIGN_DOWN((r_end->base - sum), align); |
| |
| if ((r_start->base < pcimem_start) || |
| (r_start->base > pcimem_end)) |
| // Memory range requested is larger than available. |
| return -1; |
| return 0; |
| } |
| |
| #define PCI_IO_SHIFT 8 |
| #define PCI_MEMORY_SHIFT 16 |
| #define PCI_PREF_MEMORY_SHIFT 16 |
| |
| static void |
| pci_region_map_one_entry(struct pci_region_entry *entry, u64 addr) |
| { |
| if (entry->bar >= 0) { |
| dprintf(1, "PCI: map device bdf=%pP" |
| " bar %d, addr %08llx, size %08llx [%d: %s], 64bit:%d\n", |
| entry->dev, |
| entry->bar, addr, entry->size, entry->type, |
| region_type_name[entry->type], entry->is64); |
| |
| pci_set_io_region_addr(entry->dev, entry->bar, addr, entry->is64); |
| return; |
| } |
| |
| u16 bdf = entry->dev->bdf; |
| u64 limit = addr + entry->size - 1; |
| if (!entry->size) |
| return; |
| if (entry->type == PCI_REGION_TYPE_IO) { |
| pci_config_writeb(bdf, PCI_IO_BASE, addr >> PCI_IO_SHIFT); |
| pci_config_writew(bdf, PCI_IO_BASE_UPPER16, 0); |
| pci_config_writeb(bdf, PCI_IO_LIMIT, limit >> PCI_IO_SHIFT); |
| pci_config_writew(bdf, PCI_IO_LIMIT_UPPER16, 0); |
| } |
| if (entry->type == PCI_REGION_TYPE_MEM) { |
| pci_config_writew(bdf, PCI_MEMORY_BASE, addr >> PCI_MEMORY_SHIFT); |
| pci_config_writew(bdf, PCI_MEMORY_LIMIT, limit >> PCI_MEMORY_SHIFT); |
| } |
| if (entry->type == PCI_REGION_TYPE_PREFMEM) { |
| pci_config_writew(bdf, PCI_PREF_MEMORY_BASE, addr >> PCI_PREF_MEMORY_SHIFT); |
| pci_config_writew(bdf, PCI_PREF_MEMORY_LIMIT, limit >> PCI_PREF_MEMORY_SHIFT); |
| pci_config_writel(bdf, PCI_PREF_BASE_UPPER32, addr >> 32); |
| pci_config_writel(bdf, PCI_PREF_LIMIT_UPPER32, limit >> 32); |
| } |
| } |
| |
| static void pci_region_map_entries(struct pci_bus *busses, struct pci_region *r) |
| { |
| struct hlist_node *n; |
| struct pci_region_entry *entry; |
| hlist_for_each_entry_safe(entry, n, &r->list, node) { |
| u64 addr = r->base; |
| if (entry->size <= PARISC_MMIO_LIMIT && CONFIG_PARISC) |
| r->base += entry->size; |
| else { |
| addr = add_lmmio_directed_range(entry->size, 0); |
| if (addr == -1UL) |
| hlt(); |
| } |
| if (entry->bar == -1) |
| // Update bus base address if entry is a bridge region |
| busses[entry->dev->secondary_bus].r[entry->type].base = addr; |
| pci_region_map_one_entry(entry, addr); |
| hlist_del(&entry->node); |
| free(entry); |
| } |
| } |
| |
| static void pci_bios_map_devices(struct pci_bus *busses) |
| { |
| if (pci_bios_init_root_regions_io(busses)) |
| panic("PCI: out of I/O address space\n"); |
| |
| dprintf(1, "PCI: 32: %016llx - %016llx\n", pcimem_start, pcimem_end); |
| if (pci_bios_init_root_regions_mem(busses)) { |
| struct pci_region r64_mem, r64_pref; |
| r64_mem.list.first = NULL; |
| r64_pref.list.first = NULL; |
| pci_region_migrate_64bit_entries(&busses[0].r[PCI_REGION_TYPE_MEM], |
| &r64_mem); |
| pci_region_migrate_64bit_entries(&busses[0].r[PCI_REGION_TYPE_PREFMEM], |
| &r64_pref); |
| |
| if (pci_bios_init_root_regions_mem(busses)) |
| panic("PCI: out of 32bit address space\n"); |
| |
| u64 sum_mem = pci_region_sum(&r64_mem); |
| u64 sum_pref = pci_region_sum(&r64_pref); |
| u64 align_mem = pci_region_align(&r64_mem); |
| u64 align_pref = pci_region_align(&r64_pref); |
| |
| r64_mem.base = le64_to_cpu(romfile_loadint("etc/reserved-memory-end", 0)); |
| if (r64_mem.base < 0x100000000LL + RamSizeOver4G) |
| r64_mem.base = 0x100000000LL + RamSizeOver4G; |
| r64_mem.base = ALIGN(r64_mem.base, align_mem); |
| r64_mem.base = ALIGN(r64_mem.base, (1LL<<30)); // 1G hugepage |
| r64_pref.base = r64_mem.base + sum_mem; |
| r64_pref.base = ALIGN(r64_pref.base, align_pref); |
| r64_pref.base = ALIGN(r64_pref.base, (1LL<<30)); // 1G hugepage |
| pcimem64_start = r64_mem.base; |
| pcimem64_end = r64_pref.base + sum_pref; |
| pcimem64_end = ALIGN(pcimem64_end, (1LL<<30)); // 1G hugepage |
| dprintf(1, "PCI: 64: %016llx - %016llx\n", pcimem64_start, pcimem64_end); |
| |
| pci_region_map_entries(busses, &r64_mem); |
| pci_region_map_entries(busses, &r64_pref); |
| } else { |
| // no bars mapped high -> drop 64bit window (see dsdt) |
| pcimem64_start = 0; |
| } |
| // Map regions on each device. |
| int bus; |
| for (bus = 0; bus<=MaxPCIBus; bus++) { |
| int type; |
| for (type = 0; type < PCI_REGION_TYPE_COUNT; type++) |
| pci_region_map_entries(busses, &busses[bus].r[type]); |
| } |
| } |
| |
| |
| /**************************************************************** |
| * Main setup code |
| ****************************************************************/ |
| |
| void |
| pci_setup(void) |
| { |
| if (!CONFIG_QEMU) |
| return; |
| |
| dprintf(3, "pci setup\n"); |
| |
| dprintf(1, "=== PCI bus & bridge init ===\n"); |
| if (pci_probe_host() != 0) { |
| return; |
| } |
| pci_bios_init_bus(); |
| |
| dprintf(1, "=== PCI device probing ===\n"); |
| pci_probe_devices(); |
| |
| pcimem_start = RamSize; |
| pci_bios_init_platform(); |
| |
| dprintf(1, "=== PCI new allocation pass #1 ===\n"); |
| struct pci_bus *busses = malloc_tmp(sizeof(*busses) * (MaxPCIBus + 1)); |
| if (!busses) { |
| warn_noalloc(); |
| return; |
| } |
| memset(busses, 0, sizeof(*busses) * (MaxPCIBus + 1)); |
| if (pci_bios_check_devices(busses)) |
| return; |
| |
| dprintf(1, "=== PCI new allocation pass #2 ===\n"); |
| pci_bios_map_devices(busses); |
| |
| pci_bios_init_devices(); |
| |
| free(busses); |
| |
| pci_enable_default_vga(); |
| } |