hw/ppc/pegasos2: Fix PCI interrupt routing
According to the PegasosII schematics the PCI interrupt lines are
connected to both the gpp pins of the Mv64361 north bridge and the
PINT pins of the VT8231 south bridge so guests can get interrupts from
either of these. So far we only had the MV64361 connections which
worked for on board devices but for additional PCI devices (such as
network or sound card added with -device) guest OSes expect interrupt
from the ISA IRQ 9 where the firmware routes these PCI interrupts in
VT8231 ISA bridge. After the previous patches we can now model this
and also remove the board specific connection from mv64361. Also
configure routing of these lines when using Virtual Open Firmware to
match board firmware for guests that expect this.
This fixes PCI interrupts on pegasos2 under Linux, MorphOS and AmigaOS.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Message-Id: <520ff9e6eeef600ee14a4116c0c7b11940cc499c.1678188711.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
diff --git a/hw/pci-host/mv64361.c b/hw/pci-host/mv64361.c
index 298564f..19e8031 100644
--- a/hw/pci-host/mv64361.c
+++ b/hw/pci-host/mv64361.c
@@ -873,10 +873,6 @@
}
sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->cpu_irq);
qdev_init_gpio_in_named(dev, mv64361_gpp_irq, "gpp", 32);
- /* FIXME: PCI IRQ connections may be board specific */
- for (i = 0; i < PCI_NUM_PINS; i++) {
- s->pci[1].irq[i] = qdev_get_gpio_in_named(dev, "gpp", 12 + i);
- }
}
static void mv64361_reset(DeviceState *dev)
diff --git a/hw/ppc/pegasos2.c b/hw/ppc/pegasos2.c
index 7cc375d..f1650be 100644
--- a/hw/ppc/pegasos2.c
+++ b/hw/ppc/pegasos2.c
@@ -73,6 +73,8 @@
MachineState parent_obj;
PowerPCCPU *cpu;
DeviceState *mv;
+ qemu_irq mv_pirq[PCI_NUM_PINS];
+ qemu_irq via_pirq[PCI_NUM_PINS];
Vof *vof;
void *fdt_blob;
uint64_t kernel_addr;
@@ -95,6 +97,15 @@
}
}
+static void pegasos2_pci_irq(void *opaque, int n, int level)
+{
+ Pegasos2MachineState *pm = opaque;
+
+ /* PCI interrupt lines are connected to both MV64361 and VT8231 */
+ qemu_set_irq(pm->mv_pirq[n], level);
+ qemu_set_irq(pm->via_pirq[n], level);
+}
+
static void pegasos2_init(MachineState *machine)
{
Pegasos2MachineState *pm = PEGASOS2_MACHINE(machine);
@@ -106,7 +117,7 @@
I2CBus *i2c_bus;
const char *fwname = machine->firmware ?: PROM_FILENAME;
char *filename;
- int sz;
+ int i, sz;
uint8_t *spd_data;
/* init CPU */
@@ -156,11 +167,18 @@
/* Marvell Discovery II system controller */
pm->mv = DEVICE(sysbus_create_simple(TYPE_MV64361, -1,
qdev_get_gpio_in(DEVICE(pm->cpu), PPC6xx_INPUT_INT)));
+ for (i = 0; i < PCI_NUM_PINS; i++) {
+ pm->mv_pirq[i] = qdev_get_gpio_in_named(pm->mv, "gpp", 12 + i);
+ }
pci_bus = mv64361_get_pci_bus(pm->mv, 1);
+ pci_bus_irqs(pci_bus, pegasos2_pci_irq, pm, PCI_NUM_PINS);
/* VIA VT8231 South Bridge (multifunction PCI device) */
via = OBJECT(pci_create_simple_multifunction(pci_bus, PCI_DEVFN(12, 0),
true, TYPE_VT8231_ISA));
+ for (i = 0; i < PCI_NUM_PINS; i++) {
+ pm->via_pirq[i] = qdev_get_gpio_in_named(DEVICE(via), "pirq", i);
+ }
object_property_add_alias(OBJECT(machine), "rtc-time",
object_resolve_path_component(via, "rtc"),
"date");
@@ -267,6 +285,12 @@
PCI_INTERRUPT_LINE, 2, 0x9);
pegasos2_pci_config_write(pm, 1, (PCI_DEVFN(12, 0) << 8) |
0x50, 1, 0x2);
+ pegasos2_pci_config_write(pm, 1, (PCI_DEVFN(12, 0) << 8) |
+ 0x55, 1, 0x90);
+ pegasos2_pci_config_write(pm, 1, (PCI_DEVFN(12, 0) << 8) |
+ 0x56, 1, 0x99);
+ pegasos2_pci_config_write(pm, 1, (PCI_DEVFN(12, 0) << 8) |
+ 0x57, 1, 0x90);
pegasos2_pci_config_write(pm, 1, (PCI_DEVFN(12, 1) << 8) |
PCI_INTERRUPT_LINE, 2, 0x109);
