# -*- Mode: makefile -*-

include config.mak
include $(SRC_PATH)/rules.mak

TARGET_PATH=$(SRC_PATH)/target-$(TARGET_BASE_ARCH)
VPATH=$(SRC_PATH):$(TARGET_PATH):$(SRC_PATH)/hw
QEMU_CFLAGS+= -I.. -I$(TARGET_PATH) -DNEED_CPU_H

ifdef CONFIG_USER_ONLY
# user emulator name
QEMU_PROG=qemu-$(TARGET_ARCH2)
else
# system emulator name
ifeq ($(TARGET_ARCH), i386)
QEMU_PROG=qemu$(EXESUF)
else
QEMU_PROG=qemu-system-$(TARGET_ARCH2)$(EXESUF)
endif
endif

PROGS=$(QEMU_PROG)

LIBS+=-lm

kvm.o kvm-all.o: QEMU_CFLAGS+=$(KVM_CFLAGS)

all: $(PROGS)
# Dummy command so that make thinks it has done something
	@true

#########################################################
# cpu emulator library
libobj-y = exec.o translate-all.o cpu-exec.o translate.o
libobj-y += tcg/tcg.o tcg/tcg-runtime.o
libobj-$(CONFIG_SOFTFLOAT) += fpu/softfloat.o
libobj-$(CONFIG_NOSOFTFLOAT) += fpu/softfloat-native.o
libobj-y += op_helper.o helper.o
libobj-$(CONFIG_NEED_MMU) += mmu.o
libobj-$(TARGET_ARM) += neon_helper.o iwmmxt_helper.o
libobj-$(TARGET_ALPHA) += alpha_palcode.o

# NOTE: the disassembler code is only needed for debugging
libobj-y += disas.o
libobj-$(CONFIG_ALPHA_DIS) += alpha-dis.o
libobj-$(CONFIG_ARM_DIS) += arm-dis.o
libobj-$(CONFIG_CRIS_DIS) += cris-dis.o
libobj-$(CONFIG_HPPA_DIS) += hppa-dis.o
libobj-$(CONFIG_I386_DIS) += i386-dis.o
libobj-$(CONFIG_M68K_DIS) += m68k-dis.o
libobj-$(CONFIG_MICROBLAZE_DIS) += microblaze-dis.o
libobj-$(CONFIG_MIPS_DIS) += mips-dis.o
libobj-$(CONFIG_PPC_DIS) += ppc-dis.o
libobj-$(CONFIG_S390_DIS) += s390-dis.o
libobj-$(CONFIG_SH4_DIS) += sh4-dis.o
libobj-$(CONFIG_SPARC_DIS) += sparc-dis.o

# libqemu

libqemu.a: $(libobj-y)

translate.o: translate.c cpu.h

translate-all.o: translate-all.c cpu.h

tcg/tcg.o: cpu.h

# HELPER_CFLAGS is used for all the code compiled with static register
# variables
op_helper.o cpu-exec.o: QEMU_CFLAGS += $(HELPER_CFLAGS)

# Note: this is a workaround. The real fix is to avoid compiling
# cpu_signal_handler() in cpu-exec.c.
signal.o: QEMU_CFLAGS += $(HELPER_CFLAGS)

#########################################################
# Linux user emulator target

ifdef CONFIG_LINUX_USER

VPATH+=:$(SRC_PATH)/linux-user:$(SRC_PATH)/linux-user/$(TARGET_ABI_DIR)
QEMU_CFLAGS+=-I$(SRC_PATH)/linux-user -I$(SRC_PATH)/linux-user/$(TARGET_ABI_DIR)

obj-y = main.o syscall.o strace.o mmap.o signal.o thunk.o \
      elfload.o linuxload.o uaccess.o gdbstub.o gdbstub-xml.o

obj-$(TARGET_HAS_BFLT) += flatload.o
obj-$(TARGET_HAS_ELFLOAD32) += elfload32.o

obj-$(TARGET_I386) += vm86.o

obj-i386-y += ioport-user.o

nwfpe-obj-y = fpa11.o fpa11_cpdo.o fpa11_cpdt.o fpa11_cprt.o fpopcode.o
nwfpe-obj-y += single_cpdo.o double_cpdo.o extended_cpdo.o
obj-arm-y +=  $(addprefix nwfpe/, $(nwfpe-obj-y))
obj-arm-y += arm-semi.o

obj-m68k-y += m68k-sim.o m68k-semi.o

ARLIBS=../libqemu_user.a libqemu.a
endif #CONFIG_LINUX_USER

#########################################################
# Darwin user emulator target

ifdef CONFIG_DARWIN_USER

VPATH+=:$(SRC_PATH)/darwin-user
QEMU_CFLAGS+=-I$(SRC_PATH)/darwin-user -I$(SRC_PATH)/darwin-user/$(TARGET_ARCH)

# Leave some space for the regular program loading zone
LDFLAGS+=-Wl,-segaddr,__STD_PROG_ZONE,0x1000 -image_base 0x0e000000

LIBS+=-lmx

obj-y = main.o commpage.o machload.o mmap.o signal.o syscall.o thunk.o \
        gdbstub.o gdbstub-xml.o

obj-i386-y += ioport-user.o

ARLIBS=libqemu.a

endif #CONFIG_DARWIN_USER

#########################################################
# BSD user emulator target

ifdef CONFIG_BSD_USER

VPATH+=:$(SRC_PATH)/bsd-user
QEMU_CFLAGS+=-I$(SRC_PATH)/bsd-user -I$(SRC_PATH)/bsd-user/$(TARGET_ARCH)

obj-y = main.o bsdload.o elfload.o mmap.o signal.o strace.o syscall.o \
        gdbstub.o gdbstub-xml.o uaccess.o

obj-i386-y += ioport-user.o

ARLIBS=libqemu.a ../libqemu_user.a

endif #CONFIG_BSD_USER

#########################################################
# System emulator target
ifdef CONFIG_SOFTMMU

obj-y = vl.o monitor.o pci.o loader.o isa_mmio.o machine.o \
        gdbstub.o gdbstub-xml.o msix.o ioport.o qemu-config.o
# virtio has to be here due to weird dependency between PCI and virtio-net.
# need to fix this properly
obj-y += virtio-blk.o virtio-balloon.o virtio-net.o virtio-console.o virtio-pci.o
obj-$(CONFIG_KVM) += kvm.o kvm-all.o

LIBS+=-lz

sound-obj-y =
sound-obj-$(CONFIG_SB16) += sb16.o
sound-obj-$(CONFIG_ES1370) += es1370.o
sound-obj-$(CONFIG_AC97) += ac97.o
sound-obj-$(CONFIG_ADLIB) += fmopl.o adlib.o
sound-obj-$(CONFIG_GUS) += gus.o gusemu_hal.o gusemu_mixer.o
sound-obj-$(CONFIG_CS4231A) += cs4231a.o

adlib.o fmopl.o: QEMU_CFLAGS += -DBUILD_Y8950=0

QEMU_CFLAGS += $(VNC_TLS_CFLAGS)
QEMU_CFLAGS += $(VNC_SASL_CFLAGS)

# xen backend driver support
obj-$(CONFIG_XEN) += xen_machine_pv.o xen_domainbuild.o

# USB layer
obj-y += usb-ohci.o

# PCI network cards
obj-y += eepro100.o
obj-y += ne2000.o
obj-y += pcnet.o
obj-y += rtl8139.o
obj-y += e1000.o

# PCI watchdog devices
obj-y += wdt_i6300esb.o

# Hardware support
obj-i386-y = ide/core.o ide/isa.o ide/pci.o pckbd.o $(sound-obj-y) dma.o isa-bus.o
obj-i386-y += vga.o vga-pci.o vga-isa.o
obj-i386-y += fdc.o mc146818rtc.o serial.o i8259.o i8254.o pcspk.o pc.o
obj-i386-y += cirrus_vga.o apic.o ioapic.o parallel.o acpi.o piix_pci.o
obj-i386-y += usb-uhci.o vmmouse.o vmport.o vmware_vga.o hpet.o
obj-i386-y += device-hotplug.o pci-hotplug.o smbios.o wdt_ib700.o

# shared objects
obj-ppc-y = ppc.o ide/core.o ide/isa.o ide/pci.o ide/macio.o
obj-ppc-y += vga.o vga-pci.o $(sound-obj-y) dma.o isa-bus.o openpic.o
# PREP target
obj-ppc-y += pckbd.o serial.o i8259.o i8254.o fdc.o mc146818rtc.o
obj-ppc-y += prep_pci.o ppc_prep.o
# Mac shared devices
obj-ppc-y += macio.o cuda.o adb.o mac_nvram.o mac_dbdma.o
# OldWorld PowerMac
obj-ppc-y += heathrow_pic.o grackle_pci.o ppc_oldworld.o
# NewWorld PowerMac
obj-ppc-y += unin_pci.o ppc_newworld.o
# PowerPC 4xx boards
obj-ppc-y += pflash_cfi02.o ppc4xx_devs.o ppc4xx_pci.o ppc405_uc.o ppc405_boards.o
obj-ppc-y += ppc440.o ppc440_bamboo.o
# PowerPC E500 boards
obj-ppc-y += ppce500_pci.o ppce500_mpc8544ds.o
obj-ppc-$(CONFIG_KVM) += kvm_ppc.o
obj-ppc-$(CONFIG_FDT) += device_tree.o

obj-mips-y = mips_r4k.o mips_jazz.o mips_malta.o mips_mipssim.o
obj-mips-y += mips_timer.o mips_int.o dma.o vga.o serial.o i8254.o i8259.o rc4030.o
obj-mips-y += vga-pci.o vga-isa.o vga-isa-mm.o
obj-mips-y += g364fb.o jazz_led.o dp8393x.o
obj-mips-y += ide/core.o ide/isa.o ide/pci.o
obj-mips-y += gt64xxx.o pckbd.o fdc.o mc146818rtc.o usb-uhci.o acpi.o ds1225y.o
obj-mips-y += piix4.o parallel.o cirrus_vga.o isa-bus.o pcspk.o $(sound-obj-y)
obj-mips-y += mipsnet.o
obj-mips-y += pflash_cfi01.o
obj-mips-y += vmware_vga.o

obj-microblaze-y = petalogix_s3adsp1800_mmu.o

obj-microblaze-y += microblaze_pic_cpu.o
obj-microblaze-y += xilinx_intc.o
obj-microblaze-y += xilinx_timer.o
obj-microblaze-y += xilinx_uartlite.o
obj-microblaze-y += xilinx_ethlite.o

obj-microblaze-y += pflash_cfi02.o

obj-microblaze-$(CONFIG_FDT) += device_tree.o

# Boards
obj-cris-y = cris_pic_cpu.o etraxfs.o axis_dev88.o

# IO blocks
obj-cris-y += etraxfs_dma.o
obj-cris-y += etraxfs_pic.o
obj-cris-y += etraxfs_eth.o
obj-cris-y += etraxfs_timer.o
obj-cris-y += etraxfs_ser.o

obj-cris-y += pflash_cfi02.o

ifeq ($(TARGET_ARCH), sparc64)
obj-sparc-y = sun4u.o ide/core.o ide/pci.o isa-bus.o pckbd.o apb_pci.o
obj-sparc-y += vga.o vga-pci.o
obj-sparc-y += fdc.o mc146818rtc.o serial.o
obj-sparc-y += cirrus_vga.o parallel.o
else
obj-sparc-y = sun4m.o tcx.o iommu.o slavio_intctl.o
obj-sparc-y += slavio_timer.o slavio_misc.o fdc.o isa-bus.o sparc32_dma.o
obj-sparc-y += cs4231.o eccmemctl.o sbi.o sun4c_intctl.o
endif

obj-arm-y = integratorcp.o versatilepb.o smc91c111.o arm_pic.o arm_timer.o
obj-arm-y += arm_boot.o pl011.o pl031.o pl050.o pl080.o pl110.o pl181.o pl190.o
obj-arm-y += versatile_pci.o
obj-arm-y += realview_gic.o realview.o arm_sysctl.o mpcore.o
obj-arm-y += armv7m.o armv7m_nvic.o stellaris.o pl022.o stellaris_enet.o
obj-arm-y += pl061.o
obj-arm-y += arm-semi.o
obj-arm-y += pxa2xx.o pxa2xx_pic.o pxa2xx_gpio.o pxa2xx_timer.o pxa2xx_dma.o
obj-arm-y += pxa2xx_lcd.o pxa2xx_mmci.o pxa2xx_pcmcia.o pxa2xx_keypad.o
obj-arm-y += pflash_cfi01.o gumstix.o
obj-arm-y += zaurus.o ide/core.o isa-bus.o ide/microdrive.o serial.o spitz.o tosa.o tc6393xb.o
obj-arm-y += omap1.o omap_lcdc.o omap_dma.o omap_clk.o omap_mmc.o omap_i2c.o
obj-arm-y += omap2.o omap_dss.o soc_dma.o
obj-arm-y += omap_sx1.o palm.o tsc210x.o
obj-arm-y += nseries.o blizzard.o onenand.o vga.o cbus.o tusb6010.o usb-musb.o
obj-arm-y += mst_fpga.o mainstone.o
obj-arm-y += musicpal.o pflash_cfi02.o bitbang_i2c.o marvell_88w8618_audio.o
obj-arm-y += framebuffer.o
obj-arm-y += syborg.o syborg_fb.o syborg_interrupt.o syborg_keyboard.o
obj-arm-y += syborg_serial.o syborg_timer.o syborg_pointer.o syborg_rtc.o
obj-arm-y += syborg_virtio.o

obj-sh4-y = shix.o r2d.o sh7750.o sh7750_regnames.o tc58128.o
obj-sh4-y += sh_timer.o sh_serial.o sh_intc.o sh_pci.o sm501.o serial.o
obj-sh4-y += ide/core.o isa-bus.o ide/mmio.o

obj-m68k-y = an5206.o mcf5206.o mcf_uart.o mcf_intc.o mcf5208.o mcf_fec.o
obj-m68k-y += m68k-semi.o dummy_m68k.o

main.o vl.o: QEMU_CFLAGS+=$(GPROF_CFLAGS)

vl.o: QEMU_CFLAGS+=$(SDL_CFLAGS)

vl.o: qemu-options.h

monitor.o: qemu-monitor.h

ARLIBS=../libqemu_common.a libqemu.a $(HWLIB)

endif # CONFIG_SOFTMMU

$(QEMU_PROG): $(obj-y) $(obj-$(TARGET_BASE_ARCH)-y) $(ARLIBS)
	$(call LINK,$(obj-y) $(obj-$(TARGET_BASE_ARCH)-y))


gdbstub-xml.c: $(TARGET_XML_FILES) feature_to_c.sh
ifeq ($(TARGET_XML_FILES),)
	$(call quiet-command,rm -f $@ && echo > $@,"  GEN   $(TARGET_DIR)$@")
else
	$(call quiet-command,rm -f $@ && $(SHELL) $(SRC_PATH)/feature_to_c.sh $@ $(TARGET_XML_FILES),"  GEN   $(TARGET_DIR)$@")
endif

qemu-options.h: $(SRC_PATH)/qemu-options.hx
	$(call quiet-command,sh $(SRC_PATH)/hxtool -h < $< > $@,"  GEN   $(TARGET_DIR)$@")

qemu-monitor.h: $(SRC_PATH)/qemu-monitor.hx
	$(call quiet-command,sh $(SRC_PATH)/hxtool -h < $< > $@,"  GEN   $(TARGET_DIR)$@")

clean:
	rm -f *.o *.a *~ $(PROGS) nwfpe/*.o fpu/*.o
	rm -f *.d */*.d tcg/*.o
	rm -f qemu-options.h qemu-monitor.h gdbstub-xml.c

install: all
ifneq ($(PROGS),)
	$(INSTALL) -m 755 $(STRIP_OPT) $(PROGS) "$(DESTDIR)$(bindir)"
endif

# Include automatically generated dependency files
-include $(wildcard *.d */*.d)