diff --git a/vl.c b/vl.c
index f5f7c3f..447cb9a 100644
--- a/vl.c
+++ b/vl.c
@@ -674,9 +674,9 @@
     assert(new_state < RUN_STATE_MAX);
 
     if (!runstate_valid_transitions[current_run_state][new_state]) {
-        fprintf(stderr, "ERROR: invalid runstate transition: '%s' -> '%s'\n",
-                RunState_lookup[current_run_state],
-                RunState_lookup[new_state]);
+        error_report("invalid runstate transition: '%s' -> '%s'",
+                     RunState_lookup[current_run_state],
+                     RunState_lookup[new_state]);
         abort();
     }
     trace_runstate_set(new_state);
@@ -828,8 +828,9 @@
         rtc_start_date = mktimegm(&tm);
         if (rtc_start_date == -1) {
         date_fail:
-            fprintf(stderr, "Invalid date format. Valid formats are:\n"
-                            "'2006-06-17T16:01:21' or '2006-06-17'\n");
+            error_report("invalid date format");
+            error_printf("valid formats: "
+                         "'2006-06-17T16:01:21' or '2006-06-17'\n");
             exit(1);
         }
         rtc_date_offset = qemu_time() - rtc_start_date;
@@ -859,7 +860,7 @@
         } else if (!strcmp(value, "vm")) {
             rtc_clock = QEMU_CLOCK_VIRTUAL;
         } else {
-            fprintf(stderr, "qemu: invalid option value '%s'\n", value);
+            error_report("invalid option value '%s'", value);
             exit(1);
         }
     }
@@ -879,7 +880,7 @@
         } else if (!strcmp(value, "none")) {
             /* discard is default */
         } else {
-            fprintf(stderr, "qemu: invalid option value '%s'\n", value);
+            error_report("invalid option value '%s'", value);
             exit(1);
         }
     }
@@ -905,7 +906,7 @@
     bdaddr_t bdaddr;
 
     if (nb_hcis >= MAX_NICS) {
-        fprintf(stderr, "qemu: Too many bluetooth HCIs (max %i).\n", MAX_NICS);
+        error_report("Too many bluetooth HCIs (max %i).", MAX_NICS);
         return -1;
     }
 
@@ -931,8 +932,8 @@
     struct bt_scatternet_s *vlan = qemu_find_bt_vlan(vlan_id);
 
     if (!vlan->slave)
-        fprintf(stderr, "qemu: warning: adding a VHCI to "
-                        "an empty scatternet %i\n", vlan_id);
+        error_report("warning: adding a VHCI to an empty scatternet %i",
+                     vlan_id);
 
     bt_vhci_init(bt_new_hci(vlan));
 }
@@ -950,7 +951,7 @@
     if (endp) {
         vlan_id = strtol(endp + 6, &endp, 0);
         if (*endp) {
-            fprintf(stderr, "qemu: unrecognised bluetooth vlan Id\n");
+            error_report("unrecognised bluetooth vlan Id");
             return 0;
         }
     }
@@ -958,13 +959,13 @@
     vlan = qemu_find_bt_vlan(vlan_id);
 
     if (!vlan->slave)
-        fprintf(stderr, "qemu: warning: adding a slave device to "
-                        "an empty scatternet %i\n", vlan_id);
+        error_report("warning: adding a slave device to an empty scatternet %i",
+                     vlan_id);
 
     if (!strcmp(devname, "keyboard"))
         return bt_keyboard_init(vlan);
 
-    fprintf(stderr, "qemu: unsupported bluetooth device `%s'\n", devname);
+    error_report("unsupported bluetooth device `%s'", devname);
     return 0;
 }
 
@@ -987,11 +988,11 @@
                 if (strstart(endp, ",vlan=", &p)) {
                     vlan = strtol(p, (char **) &endp, 0);
                     if (*endp) {
-                        fprintf(stderr, "qemu: bad scatternet '%s'\n", p);
+                        error_report("bad scatternet '%s'", p);
                         return 1;
                     }
                 } else {
-                    fprintf(stderr, "qemu: bad parameter '%s'\n", endp + 1);
+                    error_report("bad parameter '%s'", endp + 1);
                     return 1;
                 }
             } else
@@ -1003,7 +1004,7 @@
     } else if (strstart(opt, "device:", &endp))
         return !bt_device_add(endp);
 
-    fprintf(stderr, "qemu: bad bluetooth parameter '%s'\n", opt);
+    error_report("bad bluetooth parameter '%s'", opt);
     return 1;
 }
 
@@ -1220,18 +1221,19 @@
         } else if (threads == 0) {
             threads = cpus / (cores * sockets);
         } else if (sockets * cores * threads < cpus) {
-            fprintf(stderr, "cpu topology: error: "
-                    "sockets (%u) * cores (%u) * threads (%u) < "
-                    "smp_cpus (%u)\n",
-                    sockets, cores, threads, cpus);
+            error_report("cpu topology: "
+                         "sockets (%u) * cores (%u) * threads (%u) < "
+                         "smp_cpus (%u)",
+                         sockets, cores, threads, cpus);
             exit(1);
         }
 
         max_cpus = qemu_opt_get_number(opts, "maxcpus", cpus);
         if (sockets * cores * threads > max_cpus) {
-            fprintf(stderr, "cpu topology: error: "
-                    "sockets (%u) * cores (%u) * threads (%u) > maxcpus (%u)\n",
-                    sockets, cores, threads, max_cpus);
+            error_report("cpu topology: "
+                         "sockets (%u) * cores (%u) * threads (%u) > "
+                         "maxcpus (%u)",
+                         sockets, cores, threads, max_cpus);
             exit(1);
         }
 
@@ -1246,11 +1248,11 @@
     }
 
     if (max_cpus > MAX_CPUMASK_BITS) {
-        fprintf(stderr, "Unsupported number of maxcpus\n");
+        error_report("Unsupported number of maxcpus");
         exit(1);
     }
     if (max_cpus < smp_cpus) {
-        fprintf(stderr, "maxcpus must be equal to or greater than smp\n");
+        error_report("maxcpus must be equal to or greater than smp");
         exit(1);
     }
 
@@ -1260,7 +1262,7 @@
 {
     if (enable_mlock) {
         if (os_mlock() < 0) {
-            fprintf(stderr, "qemu: locking memory failed\n");
+            error_report("locking memory failed");
             exit(1);
         }
     }
@@ -1414,7 +1416,7 @@
     int r;
     r = usb_device_add(cmdline);
     if (r < 0) {
-        fprintf(stderr, "qemu: could not add USB device '%s'\n", cmdline);
+        error_report("could not add USB device '%s'", cmdline);
     }
     return r;
 }
@@ -1624,14 +1626,14 @@
 static void qemu_kill_report(void)
 {
     if (!qtest_driver() && shutdown_signal != -1) {
-        fprintf(stderr, "qemu: terminating on signal %d", shutdown_signal);
         if (shutdown_pid == 0) {
             /* This happens for eg ^C at the terminal, so it's worth
              * avoiding printing an odd message in that case.
              */
-            fputc('\n', stderr);
+            error_report("terminating on signal %d", shutdown_signal);
         } else {
-            fprintf(stderr, " from pid " FMT_pid "\n", shutdown_pid);
+            error_report("terminating on signal %d from pid " FMT_pid,
+                         shutdown_signal, shutdown_pid);
         }
         shutdown_signal = -1;
     }
@@ -1980,28 +1982,28 @@
         if (vga_available()) {
             vga_interface_type = VGA_STD;
         } else {
-            fprintf(stderr, "Error: standard VGA not available\n");
+            error_report("standard VGA not available");
             exit(0);
         }
     } else if (strstart(p, "cirrus", &opts)) {
         if (cirrus_vga_available()) {
             vga_interface_type = VGA_CIRRUS;
         } else {
-            fprintf(stderr, "Error: Cirrus VGA not available\n");
+            error_report("Cirrus VGA not available");
             exit(0);
         }
     } else if (strstart(p, "vmware", &opts)) {
         if (vmware_vga_available()) {
             vga_interface_type = VGA_VMWARE;
         } else {
-            fprintf(stderr, "Error: VMWare SVGA not available\n");
+            error_report("VMWare SVGA not available");
             exit(0);
         }
     } else if (strstart(p, "virtio", &opts)) {
         if (virtio_vga_available()) {
             vga_interface_type = VGA_VIRTIO;
         } else {
-            fprintf(stderr, "Error: Virtio VGA not available\n");
+            error_report("Virtio VGA not available");
             exit(0);
         }
     } else if (strstart(p, "xenfb", &opts)) {
@@ -2010,26 +2012,26 @@
         if (qxl_vga_available()) {
             vga_interface_type = VGA_QXL;
         } else {
-            fprintf(stderr, "Error: QXL VGA not available\n");
+            error_report("QXL VGA not available");
             exit(0);
         }
     } else if (strstart(p, "tcx", &opts)) {
         if (tcx_vga_available()) {
             vga_interface_type = VGA_TCX;
         } else {
-            fprintf(stderr, "Error: TCX framebuffer not available\n");
+            error_report("TCX framebuffer not available");
             exit(0);
         }
     } else if (strstart(p, "cg3", &opts)) {
         if (cg3_vga_available()) {
             vga_interface_type = VGA_CG3;
         } else {
-            fprintf(stderr, "Error: CG3 framebuffer not available\n");
+            error_report("CG3 framebuffer not available");
             exit(0);
         }
     } else if (!strstart(p, "none", &opts)) {
     invalid_vga:
-        fprintf(stderr, "Unknown vga type: %s\n", p);
+        error_report("Unknown vga type: %s", p);
         exit(1);
     }
     while (*opts) {
@@ -2349,7 +2351,7 @@
     } else if (strcmp(mode, "control") == 0) {
         flags = MONITOR_USE_CONTROL;
     } else {
-        fprintf(stderr, "unknown monitor mode \"%s\"\n", mode);
+        error_report("unknown monitor mode \"%s\"", mode);
         exit(1);
     }
 
@@ -2362,7 +2364,7 @@
     chardev = qemu_opt_get(opts, "chardev");
     chr = qemu_chr_find(chardev);
     if (chr == NULL) {
-        fprintf(stderr, "chardev \"%s\" not found\n", chardev);
+        error_report("chardev \"%s\" not found", chardev);
         exit(1);
     }
 
@@ -2390,7 +2392,7 @@
         }
         opts = qemu_chr_parse_compat(label, optarg);
         if (!opts) {
-            fprintf(stderr, "parse error: %s\n", optarg);
+            error_report("parse error: %s", optarg);
             exit(1);
         }
     }
@@ -2464,14 +2466,14 @@
     if (strcmp(devname, "none") == 0)
         return 0;
     if (index == MAX_SERIAL_PORTS) {
-        fprintf(stderr, "qemu: too many serial ports\n");
+        error_report("too many serial ports");
         exit(1);
     }
     snprintf(label, sizeof(label), "serial%d", index);
     serial_hds[index] = qemu_chr_new(label, devname, NULL);
     if (!serial_hds[index]) {
-        fprintf(stderr, "qemu: could not connect serial device"
-                " to character backend '%s'\n", devname);
+        error_report("could not connect serial device"
+                     " to character backend '%s'", devname);
         return -1;
     }
     index++;
@@ -2486,14 +2488,14 @@
     if (strcmp(devname, "none") == 0)
         return 0;
     if (index == MAX_PARALLEL_PORTS) {
-        fprintf(stderr, "qemu: too many parallel ports\n");
+        error_report("too many parallel ports");
         exit(1);
     }
     snprintf(label, sizeof(label), "parallel%d", index);
     parallel_hds[index] = qemu_chr_new(label, devname, NULL);
     if (!parallel_hds[index]) {
-        fprintf(stderr, "qemu: could not connect parallel device"
-                " to character backend '%s'\n", devname);
+        error_report("could not connect parallel device"
+                     " to character backend '%s'", devname);
         return -1;
     }
     index++;
@@ -2510,7 +2512,7 @@
     if (strcmp(devname, "none") == 0)
         return 0;
     if (index == MAX_VIRTIO_CONSOLES) {
-        fprintf(stderr, "qemu: too many virtio consoles\n");
+        error_report("too many virtio consoles");
         exit(1);
     }
 
@@ -2527,8 +2529,8 @@
     snprintf(label, sizeof(label), "virtcon%d", index);
     virtcon_hds[index] = qemu_chr_new(label, devname, NULL);
     if (!virtcon_hds[index]) {
-        fprintf(stderr, "qemu: could not connect virtio console"
-                " to character backend '%s'\n", devname);
+        error_report("could not connect virtio console"
+                     " to character backend '%s'", devname);
         return -1;
     }
     qemu_opt_set(dev_opts, "chardev", label, &error_abort);
@@ -2548,7 +2550,7 @@
         return 0;
     }
     if (index == MAX_SCLP_CONSOLES) {
-        fprintf(stderr, "qemu: too many sclp consoles\n");
+        error_report("too many sclp consoles");
         exit(1);
     }
 
@@ -2560,8 +2562,8 @@
     snprintf(label, sizeof(label), "sclpcon%d", index);
     sclp_hds[index] = qemu_chr_new(label, devname, NULL);
     if (!sclp_hds[index]) {
-        fprintf(stderr, "qemu: could not connect sclp console"
-                " to character backend '%s'\n", devname);
+        error_report("could not connect sclp console"
+                     " to character backend '%s'", devname);
         return -1;
     }
     qemu_opt_set(dev_opts, "chardev", label, &error_abort);
@@ -2579,7 +2581,7 @@
     }
     opts = qemu_opts_create(qemu_find_opts("device"), "debugcon", 1, NULL);
     if (!opts) {
-        fprintf(stderr, "qemu: already have a debugcon device\n");
+        error_report("already have a debugcon device");
         exit(1);
     }
     qemu_opt_set(opts, "driver", "isa-debugcon", &error_abort);
@@ -3010,8 +3012,7 @@
     runstate_init();
 
     if (qcrypto_init(&err) < 0) {
-        fprintf(stderr, "Cannot initialize crypto: %s\n",
-                error_get_pretty(err));
+        error_report("Cannot initialize crypto: %s", error_get_pretty(err));
         exit(1);
     }
     rtc_clock = QEMU_CLOCK_HOST;
@@ -3169,7 +3170,7 @@
                         }
                     } else if (*p != '\0') {
                     chs_fail:
-                        fprintf(stderr, "qemu: invalid physical CHS format\n");
+                        error_report("invalid physical CHS format");
                         exit(1);
                     }
                     if (hda_opts != NULL) {
@@ -3212,7 +3213,7 @@
 #ifdef CONFIG_CURSES
                 display_type = DT_CURSES;
 #else
-                fprintf(stderr, "Curses support is disabled\n");
+                error_report("Curses support is disabled");
                 exit(1);
 #endif
                 break;
@@ -3223,8 +3224,7 @@
                 graphic_rotate = strtol(optarg, (char **) &optarg, 10);
                 if (graphic_rotate != 0 && graphic_rotate != 90 &&
                     graphic_rotate != 180 && graphic_rotate != 270) {
-                    fprintf(stderr,
-                        "qemu: only 90, 180, 270 deg rotation is available\n");
+                    error_report("only 90, 180, 270 deg rotation is available");
                     exit(1);
                 }
                 break;
@@ -3375,7 +3375,7 @@
                     w = strtol(p, (char **)&p, 10);
                     if (w <= 0) {
                     graphic_error:
-                        fprintf(stderr, "qemu: invalid resolution or depth\n");
+                        error_report("invalid resolution or depth");
                         exit(1);
                     }
                     if (*p != 'x')
@@ -3441,7 +3441,7 @@
             case QEMU_OPTION_fsdev:
                 olist = qemu_find_opts("fsdev");
                 if (!olist) {
-                    fprintf(stderr, "fsdev is not supported by this qemu build.\n");
+                    error_report("fsdev is not supported by this qemu build.");
                     exit(1);
                 }
                 opts = qemu_opts_parse_noisily(olist, optarg, true);
@@ -3456,7 +3456,7 @@
 
                 olist = qemu_find_opts("virtfs");
                 if (!olist) {
-                    fprintf(stderr, "virtfs is not supported by this qemu build.\n");
+                    error_report("virtfs is not supported by this qemu build.");
                     exit(1);
                 }
                 opts = qemu_opts_parse_noisily(olist, optarg, true);
@@ -3466,15 +3466,15 @@
 
                 if (qemu_opt_get(opts, "fsdriver") == NULL ||
                     qemu_opt_get(opts, "mount_tag") == NULL) {
-                    fprintf(stderr, "Usage: -virtfs fsdriver,mount_tag=tag.\n");
+                    error_report("Usage: -virtfs fsdriver,mount_tag=tag.");
                     exit(1);
                 }
                 fsdev = qemu_opts_create(qemu_find_opts("fsdev"),
                                          qemu_opt_get(opts, "mount_tag"),
                                          1, NULL);
                 if (!fsdev) {
-                    fprintf(stderr, "duplicate fsdev id: %s\n",
-                            qemu_opt_get(opts, "mount_tag"));
+                    error_report("duplicate fsdev id: %s",
+                                 qemu_opt_get(opts, "mount_tag"));
                     exit(1);
                 }
 
@@ -3483,8 +3483,8 @@
 #ifdef CONFIG_SYNC_FILE_RANGE
                     qemu_opt_set(fsdev, "writeout", writeout, &error_abort);
 #else
-                    fprintf(stderr, "writeout=immediate not supported on "
-                            "this platform\n");
+                    error_report("writeout=immediate not supported "
+                                 "on this platform");
                     exit(1);
 #endif
                 }
@@ -3523,7 +3523,7 @@
                 fsdev = qemu_opts_create(qemu_find_opts("fsdev"), "v_synth",
                                          1, NULL);
                 if (!fsdev) {
-                    fprintf(stderr, "duplicate option: %s\n", "virtfs_synth");
+                    error_report("duplicate option: %s", "virtfs_synth");
                     exit(1);
                 }
                 qemu_opt_set(fsdev, "fsdriver", "synth", &error_abort);
@@ -3544,15 +3544,14 @@
                 break;
             case QEMU_OPTION_watchdog:
                 if (watchdog) {
-                    fprintf(stderr,
-                            "qemu: only one watchdog option may be given\n");
+                    error_report("only one watchdog option may be given");
                     return 1;
                 }
                 watchdog = optarg;
                 break;
             case QEMU_OPTION_watchdog_action:
                 if (select_watchdog_action(optarg) == -1) {
-                    fprintf(stderr, "Unknown -watchdog-action parameter\n");
+                    error_report("Unknown -watchdog-action parameter");
                     exit(1);
                 }
                 break;
@@ -3596,7 +3595,7 @@
                 display_type = DT_SDL;
                 break;
 #else
-                fprintf(stderr, "SDL support is disabled\n");
+                error_report("SDL support is disabled");
                 exit(1);
 #endif
             case QEMU_OPTION_pidfile:
@@ -3658,8 +3657,8 @@
                 qemu_opts_parse_noisily(olist, "accel=tcg", false);
                 break;
             case QEMU_OPTION_no_kvm_pit: {
-                fprintf(stderr, "Warning: KVM PIT can no longer be disabled "
-                                "separately.\n");
+                error_report("Warning: KVM PIT can no longer be disabled "
+                             "separately.");
                 break;
             }
             case QEMU_OPTION_no_kvm_pit_reinjection: {
@@ -3672,8 +3671,8 @@
                     { /* end of list */ }
                 };
 
-                fprintf(stderr, "Warning: option deprecated, use "
-                        "lost_tick_policy property of kvm-pit instead.\n");
+                error_report("Warning: option deprecated, use "
+                             "lost_tick_policy property of kvm-pit instead.");
                 qdev_prop_register_global_list(kvm_pit_lost_tick_policy);
                 break;
             }
@@ -3708,7 +3707,7 @@
                     exit(1);
                 }
 #else
-                fprintf(stderr, "VNC support is disabled\n");
+                error_report("VNC support is disabled");
                 exit(1);
 #endif
                 break;
@@ -3721,7 +3720,7 @@
                 break;
             case QEMU_OPTION_balloon:
                 if (balloon_parse(optarg) < 0) {
-                    fprintf(stderr, "Unknown -balloon argument %s\n", optarg);
+                    error_report("Unknown -balloon argument %s", optarg);
                     exit(1);
                 }
                 break;
@@ -3736,15 +3735,15 @@
                 break;
             case QEMU_OPTION_uuid:
                 if(qemu_uuid_parse(optarg, qemu_uuid) < 0) {
-                    fprintf(stderr, "Fail to parse UUID string."
-                            " Wrong format.\n");
+                    error_report("Fail to parse UUID string."
+                                 " Wrong format.");
                     exit(1);
                 }
                 qemu_uuid_set = true;
                 break;
             case QEMU_OPTION_option_rom:
                 if (nb_option_roms >= MAX_OPTION_ROMS) {
-                    fprintf(stderr, "Too many option ROMs\n");
+                    error_report("Too many option ROMs");
                     exit(1);
                 }
                 opts = qemu_opts_parse_noisily(qemu_find_opts("option-rom"),
@@ -3756,7 +3755,7 @@
                 option_rom[nb_option_roms].bootindex =
                     qemu_opt_get_number(opts, "bootindex", -1);
                 if (!option_rom[nb_option_roms].name) {
-                    fprintf(stderr, "Option ROM file is not specified\n");
+                    error_report("Option ROM file is not specified");
                     exit(1);
                 }
                 nb_option_roms++;
@@ -3781,9 +3780,8 @@
                         } else  if (strcmp("auto", target) == 0) {
                             semihosting.target = SEMIHOSTING_TARGET_AUTO;
                         } else {
-                            fprintf(stderr, "Unsupported semihosting-config"
-                                    " %s\n",
-                                optarg);
+                            error_report("Unsupported semihosting-config %s",
+                                         optarg);
                             exit(1);
                         }
                     } else {
@@ -3793,14 +3791,14 @@
                     qemu_opt_foreach(opts, add_semihosting_arg,
                                      &semihosting, NULL);
                 } else {
-                    fprintf(stderr, "Unsupported semihosting-config %s\n",
-                            optarg);
+                    error_report("Unsupported semihosting-config %s",
+                                 optarg);
                     exit(1);
                 }
                 break;
             case QEMU_OPTION_tdf:
-                fprintf(stderr, "Warning: user space PIT time drift fix "
-                                "is no longer supported.\n");
+                error_report("Warning: user space PIT time drift fix "
+                             "is no longer supported.");
                 break;
             case QEMU_OPTION_name:
                 opts = qemu_opts_parse_noisily(qemu_find_opts("name"),
@@ -3811,7 +3809,7 @@
                 break;
             case QEMU_OPTION_prom_env:
                 if (nb_prom_envs >= MAX_PROM_ENVS) {
-                    fprintf(stderr, "Too many prom variables\n");
+                    error_report("Too many prom variables");
                     exit(1);
                 }
                 prom_envs[nb_prom_envs] = optarg;
@@ -3894,8 +3892,8 @@
                 {
                     int ret = qemu_read_config_file(optarg);
                     if (ret < 0) {
-                        fprintf(stderr, "read config %s: %s\n", optarg,
-                            strerror(-ret));
+                        error_report("read config %s: %s", optarg,
+                                     strerror(-ret));
                         exit(1);
                     }
                     break;
@@ -3903,7 +3901,7 @@
             case QEMU_OPTION_spice:
                 olist = qemu_find_opts("spice");
                 if (!olist) {
-                    fprintf(stderr, "spice is not supported by this qemu build.\n");
+                    error_report("spice is not supported by this qemu build.");
                     exit(1);
                 }
                 opts = qemu_opts_parse_noisily(olist, optarg, false);
@@ -3920,7 +3918,8 @@
                     } else {
                         fp = fopen(optarg, "w");
                         if (fp == NULL) {
-                            fprintf(stderr, "open %s: %s\n", optarg, strerror(errno));
+                            error_report("open %s: %s", optarg,
+                                         strerror(errno));
                             exit(1);
                         }
                     }
@@ -3981,13 +3980,13 @@
                 break;
             case QEMU_OPTION_dump_vmstate:
                 if (vmstate_dump_file) {
-                    fprintf(stderr, "qemu: only one '-dump-vmstate' "
-                            "option may be given\n");
+                    error_report("only one '-dump-vmstate' "
+                                 "option may be given");
                     exit(1);
                 }
                 vmstate_dump_file = fopen(optarg, "w");
                 if (vmstate_dump_file == NULL) {
-                    fprintf(stderr, "open %s: %s\n", optarg, strerror(errno));
+                    error_report("open %s: %s", optarg, strerror(errno));
                     exit(1);
                 }
                 break;
@@ -4004,8 +4003,8 @@
     }
 
     if (machine_class == NULL) {
-        fprintf(stderr, "No machine specified, and there is no default.\n"
-                "Use -machine help to list supported machines!\n");
+        error_report("No machine specified, and there is no default.");
+        error_printf("Use -machine help to list supported machines!\n");
         exit(1);
     }
 
@@ -4106,9 +4105,9 @@
 
     machine_class->max_cpus = machine_class->max_cpus ?: 1; /* Default to UP */
     if (max_cpus > machine_class->max_cpus) {
-        fprintf(stderr, "Number of SMP CPUs requested (%d) exceeds max CPUs "
-                "supported by machine '%s' (%d)\n", max_cpus,
-                machine_class->name, machine_class->max_cpus);
+        error_report("Number of SMP CPUs requested (%d) exceeds max CPUs "
+                     "supported by machine '%s' (%d)", max_cpus,
+                     machine_class->name, machine_class->max_cpus);
         exit(1);
     }
 
@@ -4169,12 +4168,12 @@
         if (display_type == DT_NOGRAPHIC
             && (default_parallel || default_serial
                 || default_monitor || default_virtcon)) {
-            fprintf(stderr, "-nographic can not be used with -daemonize\n");
+            error_report("-nographic can not be used with -daemonize");
             exit(1);
         }
 #ifdef CONFIG_CURSES
         if (display_type == DT_CURSES) {
-            fprintf(stderr, "curses display can not be used with -daemonize\n");
+            error_report("curses display can not be used with -daemonize");
             exit(1);
         }
 #endif
@@ -4233,12 +4232,12 @@
     }
 
     if ((no_frame || alt_grab || ctrl_grab) && display_type != DT_SDL) {
-        fprintf(stderr, "-no-frame, -alt-grab and -ctrl-grab are only valid "
-                        "for SDL, ignoring option\n");
+        error_report("-no-frame, -alt-grab and -ctrl-grab are only valid "
+                     "for SDL, ignoring option");
     }
     if (no_quit && (display_type != DT_GTK && display_type != DT_SDL)) {
-        fprintf(stderr, "-no-quit is only valid for GTK and SDL, "
-                        "ignoring option\n");
+        error_report("-no-quit is only valid for GTK and SDL, "
+                     "ignoring option");
     }
 
 #if defined(CONFIG_GTK)
@@ -4253,9 +4252,9 @@
 #endif
     if (request_opengl == 1 && display_opengl == 0) {
 #if defined(CONFIG_OPENGL)
-        fprintf(stderr, "OpenGL is not supported by the display.\n");
+        error_report("OpenGL is not supported by the display.");
 #else
-        fprintf(stderr, "QEMU was built without opengl support.\n");
+        error_report("QEMU was built without opengl support.");
 #endif
         exit(1);
     }
@@ -4281,7 +4280,7 @@
 #endif
 
     if (pid_file && qemu_create_pidfile(pid_file) != 0) {
-        fprintf(stderr, "Could not acquire pid file: %s\n", strerror(errno));
+        error_report("Could not acquire pid file: %s", strerror(errno));
         exit(1);
     }
 
@@ -4352,17 +4351,17 @@
     linux_boot = (kernel_filename != NULL);
 
     if (!linux_boot && *kernel_cmdline != '\0') {
-        fprintf(stderr, "-append only allowed with -kernel option\n");
+        error_report("-append only allowed with -kernel option");
         exit(1);
     }
 
     if (!linux_boot && initrd_filename != NULL) {
-        fprintf(stderr, "-initrd only allowed with -kernel option\n");
+        error_report("-initrd only allowed with -kernel option");
         exit(1);
     }
 
     if (!linux_boot && qemu_opt_get(machine_opts, "dtb")) {
-        fprintf(stderr, "-dtb only allowed with -kernel option\n");
+        error_report("-dtb only allowed with -kernel option");
         exit(1);
     }
 
@@ -4381,7 +4380,7 @@
     cpu_ticks_init();
     if (icount_opts) {
         if (kvm_enabled() || xen_enabled()) {
-            fprintf(stderr, "-icount is not allowed with kvm or xen\n");
+            error_report("-icount is not allowed with kvm or xen");
             exit(1);
         }
         configure_icount(icount_opts, &error_abort);
@@ -4414,7 +4413,7 @@
     if (!xen_enabled()) {
         /* On 32-bit hosts, QEMU is limited by virtual address space */
         if (ram_size > (2047 << 20) && HOST_LONG_BITS == 32) {
-            fprintf(stderr, "qemu: at most 2047 MB RAM can be simulated\n");
+            error_report("at most 2047 MB RAM can be simulated");
             exit(1);
         }
     }
@@ -4601,7 +4600,7 @@
     qemu_run_machine_init_done_notifiers();
 
     if (rom_check_and_register_reset() != 0) {
-        fprintf(stderr, "rom check and register reset failed\n");
+        error_report("rom check and register reset failed");
         exit(1);
     }