Merge tag 'block-pull-request' of https://gitlab.com/stefanha/qemu into staging
Pull request
Please include these bug fixes in QEMU 8.1. Thanks!
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmTCzPUACgkQnKSrs4Gr
# c8g1DAf/fPUQ4zRsCn079pHIyK9TFo4COm23p4kiusxj8otfjt8LH1Zsc9pGWC2+
# bl2RlnPID8JlyJFDRN7b/RCEhj45a83GtCmhDDmqVgy1eO5vwOKm2XyyWeD+pq/U
# Hf2QLPLZZ7tCD8Njpty+gB3Ux4zqthKGXSg8FpJ3w0tl4me2efLvjMa6jHMwtnHT
# aAbyQ3WMpT9w4XHLqRQDHzBqrTSY4od3nl9SrM/DQ2klLIcz8ECTEZVBY9B3pq6m
# QvAg24tfb0QvS14YnZv/PMCfOaVuE87M9G4f93pCynnMxMYze+XczL0sGhIAS9wp
# 03NgGlhGumOix6r2kHjlG6p3xywV8A==
# =jMf8
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 27 Jul 2023 01:00:53 PM PDT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
* tag 'block-pull-request' of https://gitlab.com/stefanha/qemu:
block/blkio: use blkio_set_int("fd") to check fd support
block/blkio: fall back on using `path` when `fd` setting fails
block/blkio: retry blkio_connect() if it fails using `fd`
block/blkio: move blkio_connect() in the drivers functions
block: Fix pad_request's request restriction
block/file-posix: fix g_file_get_contents return path
block/blkio: do not use open flags in qemu_open()
block/blkio: enable the completion eventfd
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
diff --git a/block/blkio.c b/block/blkio.c
index 1798648..8e7ce42 100644
--- a/block/blkio.c
+++ b/block/blkio.c
@@ -603,8 +603,8 @@
}
}
-static int blkio_io_uring_open(BlockDriverState *bs, QDict *options, int flags,
- Error **errp)
+static int blkio_io_uring_connect(BlockDriverState *bs, QDict *options,
+ int flags, Error **errp)
{
const char *filename = qdict_get_str(options, "filename");
BDRVBlkioState *s = bs->opaque;
@@ -627,11 +627,18 @@
}
}
+ ret = blkio_connect(s->blkio);
+ if (ret < 0) {
+ error_setg_errno(errp, -ret, "blkio_connect failed: %s",
+ blkio_get_error_msg());
+ return ret;
+ }
+
return 0;
}
-static int blkio_nvme_io_uring(BlockDriverState *bs, QDict *options, int flags,
- Error **errp)
+static int blkio_nvme_io_uring_connect(BlockDriverState *bs, QDict *options,
+ int flags, Error **errp)
{
const char *path = qdict_get_try_str(options, "path");
BDRVBlkioState *s = bs->opaque;
@@ -655,11 +662,18 @@
return -EINVAL;
}
+ ret = blkio_connect(s->blkio);
+ if (ret < 0) {
+ error_setg_errno(errp, -ret, "blkio_connect failed: %s",
+ blkio_get_error_msg());
+ return ret;
+ }
+
return 0;
}
-static int blkio_virtio_blk_common_open(BlockDriverState *bs,
- QDict *options, int flags, Error **errp)
+static int blkio_virtio_blk_connect(BlockDriverState *bs, QDict *options,
+ int flags, Error **errp)
{
const char *path = qdict_get_try_str(options, "path");
BDRVBlkioState *s = bs->opaque;
@@ -676,7 +690,7 @@
return -EINVAL;
}
- if (blkio_get_int(s->blkio, "fd", &fd) == 0) {
+ if (blkio_set_int(s->blkio, "fd", -1) == 0) {
fd_supported = true;
}
@@ -686,27 +700,30 @@
* layer through the "/dev/fdset/N" special path.
*/
if (fd_supported) {
- int open_flags;
-
- if (flags & BDRV_O_RDWR) {
- open_flags = O_RDWR;
- } else {
- open_flags = O_RDONLY;
- }
-
- fd = qemu_open(path, open_flags, errp);
+ /*
+ * `path` can contain the path of a character device
+ * (e.g. /dev/vhost-vdpa-0 or /dev/vfio/vfio) or a unix socket.
+ *
+ * So, we should always open it with O_RDWR flag, also if BDRV_O_RDWR
+ * is not set in the open flags, because the exchange of IOCTL commands
+ * for example will fail.
+ *
+ * In order to open the device read-only, we are using the `read-only`
+ * property of the libblkio driver in blkio_file_open().
+ */
+ fd = qemu_open(path, O_RDWR, NULL);
if (fd < 0) {
- return -EINVAL;
+ fd_supported = false;
+ } else {
+ ret = blkio_set_int(s->blkio, "fd", fd);
+ if (ret < 0) {
+ fd_supported = false;
+ qemu_close(fd);
+ }
}
+ }
- ret = blkio_set_int(s->blkio, "fd", fd);
- if (ret < 0) {
- error_setg_errno(errp, -ret, "failed to set fd: %s",
- blkio_get_error_msg());
- qemu_close(fd);
- return ret;
- }
- } else {
+ if (!fd_supported) {
ret = blkio_set_str(s->blkio, "path", path);
if (ret < 0) {
error_setg_errno(errp, -ret, "failed to set path: %s",
@@ -715,6 +732,42 @@
}
}
+ ret = blkio_connect(s->blkio);
+ /*
+ * If the libblkio driver doesn't support the `fd` property, blkio_connect()
+ * will fail with -EINVAL. So let's try calling blkio_connect() again by
+ * directly setting `path`.
+ */
+ if (fd_supported && ret == -EINVAL) {
+ qemu_close(fd);
+
+ /*
+ * We need to clear the `fd` property we set previously by setting
+ * it to -1.
+ */
+ ret = blkio_set_int(s->blkio, "fd", -1);
+ if (ret < 0) {
+ error_setg_errno(errp, -ret, "failed to set fd: %s",
+ blkio_get_error_msg());
+ return ret;
+ }
+
+ ret = blkio_set_str(s->blkio, "path", path);
+ if (ret < 0) {
+ error_setg_errno(errp, -ret, "failed to set path: %s",
+ blkio_get_error_msg());
+ return ret;
+ }
+
+ ret = blkio_connect(s->blkio);
+ }
+
+ if (ret < 0) {
+ error_setg_errno(errp, -ret, "blkio_connect failed: %s",
+ blkio_get_error_msg());
+ return ret;
+ }
+
qdict_del(options, "path");
return 0;
@@ -734,24 +787,6 @@
return ret;
}
- if (strcmp(blkio_driver, "io_uring") == 0) {
- ret = blkio_io_uring_open(bs, options, flags, errp);
- } else if (strcmp(blkio_driver, "nvme-io_uring") == 0) {
- ret = blkio_nvme_io_uring(bs, options, flags, errp);
- } else if (strcmp(blkio_driver, "virtio-blk-vfio-pci") == 0) {
- ret = blkio_virtio_blk_common_open(bs, options, flags, errp);
- } else if (strcmp(blkio_driver, "virtio-blk-vhost-user") == 0) {
- ret = blkio_virtio_blk_common_open(bs, options, flags, errp);
- } else if (strcmp(blkio_driver, "virtio-blk-vhost-vdpa") == 0) {
- ret = blkio_virtio_blk_common_open(bs, options, flags, errp);
- } else {
- g_assert_not_reached();
- }
- if (ret < 0) {
- blkio_destroy(&s->blkio);
- return ret;
- }
-
if (!(flags & BDRV_O_RDWR)) {
ret = blkio_set_bool(s->blkio, "read-only", true);
if (ret < 0) {
@@ -762,10 +797,20 @@
}
}
- ret = blkio_connect(s->blkio);
+ if (strcmp(blkio_driver, "io_uring") == 0) {
+ ret = blkio_io_uring_connect(bs, options, flags, errp);
+ } else if (strcmp(blkio_driver, "nvme-io_uring") == 0) {
+ ret = blkio_nvme_io_uring_connect(bs, options, flags, errp);
+ } else if (strcmp(blkio_driver, "virtio-blk-vfio-pci") == 0) {
+ ret = blkio_virtio_blk_connect(bs, options, flags, errp);
+ } else if (strcmp(blkio_driver, "virtio-blk-vhost-user") == 0) {
+ ret = blkio_virtio_blk_connect(bs, options, flags, errp);
+ } else if (strcmp(blkio_driver, "virtio-blk-vhost-vdpa") == 0) {
+ ret = blkio_virtio_blk_connect(bs, options, flags, errp);
+ } else {
+ g_assert_not_reached();
+ }
if (ret < 0) {
- error_setg_errno(errp, -ret, "blkio_connect failed: %s",
- blkio_get_error_msg());
blkio_destroy(&s->blkio);
return ret;
}
@@ -845,6 +890,7 @@
QLIST_INIT(&s->bounce_bufs);
s->blkioq = blkio_get_queue(s->blkio, 0);
s->completion_fd = blkioq_get_completion_fd(s->blkioq);
+ blkioq_set_completion_fd_enabled(s->blkioq, true);
blkio_attach_aio_context(bs, bdrv_get_aio_context(bs));
return 0;
diff --git a/block/file-posix.c b/block/file-posix.c
index 9e8e3d8..b16e9c2 100644
--- a/block/file-posix.c
+++ b/block/file-posix.c
@@ -1232,7 +1232,6 @@
static int get_sysfs_str_val(struct stat *st, const char *attribute,
char **val) {
g_autofree char *sysfspath = NULL;
- int ret;
size_t len;
if (!S_ISBLK(st->st_mode)) {
@@ -1242,8 +1241,7 @@
sysfspath = g_strdup_printf("/sys/dev/block/%u:%u/queue/%s",
major(st->st_rdev), minor(st->st_rdev),
attribute);
- ret = g_file_get_contents(sysfspath, val, &len, NULL);
- if (ret == -1) {
+ if (!g_file_get_contents(sysfspath, val, &len, NULL)) {
return -ENOENT;
}
@@ -1253,7 +1251,7 @@
if (*(p + len - 1) == '\n') {
*(p + len - 1) = '\0';
}
- return ret;
+ return 0;
}
#endif
diff --git a/block/io.c b/block/io.c
index e8293d6..055fcf7 100644
--- a/block/io.c
+++ b/block/io.c
@@ -1710,7 +1710,11 @@
int sliced_niov;
size_t sliced_head, sliced_tail;
- bdrv_check_qiov_request(*offset, *bytes, *qiov, *qiov_offset, &error_abort);
+ /* Should have been checked by the caller already */
+ ret = bdrv_check_request32(*offset, *bytes, *qiov, *qiov_offset);
+ if (ret < 0) {
+ return ret;
+ }
if (!bdrv_init_padding(bs, *offset, *bytes, write, pad)) {
if (padded) {
@@ -1723,7 +1727,7 @@
&sliced_head, &sliced_tail,
&sliced_niov);
- /* Guaranteed by bdrv_check_qiov_request() */
+ /* Guaranteed by bdrv_check_request32() */
assert(*bytes <= SIZE_MAX);
ret = bdrv_create_padded_qiov(bs, pad, sliced_iov, sliced_niov,
sliced_head, *bytes);
