# See docs/devel/tracing.txt for syntax documentation.

# bcm2835_sdhost.c
bcm2835_sdhost_read(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
bcm2835_sdhost_write(uint64_t offset, uint64_t data, unsigned size) "offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
bcm2835_sdhost_edm_change(const char *why, uint32_t edm) "(%s) EDM now 0x%x"
bcm2835_sdhost_update_irq(uint32_t irq) "IRQ bits 0x%x"

# core.c
sdbus_command(const char *bus_name, uint8_t cmd, uint32_t arg) "@%s CMD%02d arg 0x%08x"
sdbus_read(const char *bus_name, uint8_t value) "@%s value 0x%02x"
sdbus_write(const char *bus_name, uint8_t value) "@%s value 0x%02x"
sdbus_set_voltage(const char *bus_name, uint16_t millivolts) "@%s %u (mV)"
sdbus_get_dat_lines(const char *bus_name, uint8_t dat_lines) "@%s dat_lines: %u"
sdbus_get_cmd_line(const char *bus_name, bool cmd_line) "@%s cmd_line: %u"

# sdhci.c
sdhci_set_inserted(const char *level) "card state changed: %s"
sdhci_send_command(uint8_t cmd, uint32_t arg) "CMD%02u ARG[0x%08x]"
sdhci_error(const char *msg) "%s"
sdhci_response4(uint32_t r0) "RSPREG[31..0]=0x%08x"
sdhci_response16(uint32_t r3, uint32_t r2, uint32_t r1, uint32_t r0) "RSPREG[127..96]=0x%08x, RSPREG[95..64]=0x%08x, RSPREG[63..32]=0x%08x, RSPREG[31..0]=0x%08x"
sdhci_end_transfer(uint8_t cmd, uint32_t arg) "Automatically issue CMD%02u 0x%08x"
sdhci_adma(const char *desc, uint32_t sysad) "%s: admasysaddr=0x%" PRIx32
sdhci_adma_loop(uint64_t addr, uint16_t length, uint8_t attr) "addr=0x%08" PRIx64 ", len=%d, attr=0x%x"
sdhci_adma_transfer_completed(void) ""
sdhci_access(const char *access, unsigned int size, uint64_t offset, const char *dir, uint64_t val, uint64_t val2) "%s%u: addr[0x%04" PRIx64 "] %s 0x%08" PRIx64 " (%" PRIu64 ")"
sdhci_read_dataport(uint16_t data_count) "all %u bytes of data have been read from input buffer"
sdhci_write_dataport(uint16_t data_count) "write buffer filled with %u bytes of data"
sdhci_capareg(const char *desc, uint16_t val) "%s: %u"

# sd.c
sdcard_normal_command(const char *proto, const char *cmd_desc, uint8_t cmd, uint32_t arg, const char *state) "%s %20s/ CMD%02d arg 0x%08x (state %s)"
sdcard_app_command(const char *proto, const char *acmd_desc, uint8_t acmd, uint32_t arg, const char *state) "%s %23s/ACMD%02d arg 0x%08x (state %s)"
sdcard_response(const char *rspdesc, int rsplen) "%s (sz:%d)"
sdcard_powerup(void) ""
sdcard_inquiry_cmd41(void) ""
sdcard_reset(void) ""
sdcard_set_blocklen(uint16_t length) "0x%03x"
sdcard_inserted(bool readonly) "read_only: %u"
sdcard_ejected(void) ""
sdcard_erase(void) ""
sdcard_lock(void) ""
sdcard_unlock(void) ""
sdcard_read_block(uint64_t addr, uint32_t len) "addr 0x%" PRIx64 " size 0x%x"
sdcard_write_block(uint64_t addr, uint32_t len) "addr 0x%" PRIx64 " size 0x%x"
sdcard_write_data(const char *proto, const char *cmd_desc, uint8_t cmd, uint8_t value) "%s %20s/ CMD%02d value 0x%02x"
sdcard_read_data(const char *proto, const char *cmd_desc, uint8_t cmd, int length) "%s %20s/ CMD%02d len %d"
sdcard_set_voltage(uint16_t millivolts) "%u mV"

# milkymist-memcard.c
milkymist_memcard_memory_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
milkymist_memcard_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"

# pxa2xx_mmci.c
pxa2xx_mmci_read(uint8_t size, uint32_t addr, uint32_t value) "size %d addr 0x%02x value 0x%08x"
pxa2xx_mmci_write(uint8_t size, uint32_t addr, uint32_t value) "size %d addr 0x%02x value 0x%08x"