| /* |
| * QEMU RISC-V VirtIO Board |
| * |
| * Copyright (c) 2017 SiFive, Inc. |
| * |
| * RISC-V machine with 16550a UART and VirtIO MMIO |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2 or later, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu/units.h" |
| #include "qemu/error-report.h" |
| #include "qapi/error.h" |
| #include "hw/boards.h" |
| #include "hw/loader.h" |
| #include "hw/sysbus.h" |
| #include "hw/qdev-properties.h" |
| #include "hw/char/serial.h" |
| #include "target/riscv/cpu.h" |
| #include "hw/riscv/riscv_hart.h" |
| #include "hw/riscv/virt.h" |
| #include "hw/riscv/boot.h" |
| #include "hw/riscv/numa.h" |
| #include "hw/intc/riscv_aclint.h" |
| #include "hw/intc/riscv_aplic.h" |
| #include "hw/intc/sifive_plic.h" |
| #include "hw/misc/sifive_test.h" |
| #include "chardev/char.h" |
| #include "sysemu/device_tree.h" |
| #include "sysemu/sysemu.h" |
| #include "sysemu/kvm.h" |
| #include "hw/pci/pci.h" |
| #include "hw/pci-host/gpex.h" |
| #include "hw/display/ramfb.h" |
| |
| static const MemMapEntry virt_memmap[] = { |
| [VIRT_DEBUG] = { 0x0, 0x100 }, |
| [VIRT_MROM] = { 0x1000, 0xf000 }, |
| [VIRT_TEST] = { 0x100000, 0x1000 }, |
| [VIRT_RTC] = { 0x101000, 0x1000 }, |
| [VIRT_CLINT] = { 0x2000000, 0x10000 }, |
| [VIRT_ACLINT_SSWI] = { 0x2F00000, 0x4000 }, |
| [VIRT_PCIE_PIO] = { 0x3000000, 0x10000 }, |
| [VIRT_PLIC] = { 0xc000000, VIRT_PLIC_SIZE(VIRT_CPUS_MAX * 2) }, |
| [VIRT_APLIC_M] = { 0xc000000, APLIC_SIZE(VIRT_CPUS_MAX) }, |
| [VIRT_APLIC_S] = { 0xd000000, APLIC_SIZE(VIRT_CPUS_MAX) }, |
| [VIRT_UART0] = { 0x10000000, 0x100 }, |
| [VIRT_VIRTIO] = { 0x10001000, 0x1000 }, |
| [VIRT_FW_CFG] = { 0x10100000, 0x18 }, |
| [VIRT_FLASH] = { 0x20000000, 0x4000000 }, |
| [VIRT_PCIE_ECAM] = { 0x30000000, 0x10000000 }, |
| [VIRT_PCIE_MMIO] = { 0x40000000, 0x40000000 }, |
| [VIRT_DRAM] = { 0x80000000, 0x0 }, |
| }; |
| |
| /* PCIe high mmio is fixed for RV32 */ |
| #define VIRT32_HIGH_PCIE_MMIO_BASE 0x300000000ULL |
| #define VIRT32_HIGH_PCIE_MMIO_SIZE (4 * GiB) |
| |
| /* PCIe high mmio for RV64, size is fixed but base depends on top of RAM */ |
| #define VIRT64_HIGH_PCIE_MMIO_SIZE (16 * GiB) |
| |
| static MemMapEntry virt_high_pcie_memmap; |
| |
| #define VIRT_FLASH_SECTOR_SIZE (256 * KiB) |
| |
| static PFlashCFI01 *virt_flash_create1(RISCVVirtState *s, |
| const char *name, |
| const char *alias_prop_name) |
| { |
| /* |
| * Create a single flash device. We use the same parameters as |
| * the flash devices on the ARM virt board. |
| */ |
| DeviceState *dev = qdev_new(TYPE_PFLASH_CFI01); |
| |
| qdev_prop_set_uint64(dev, "sector-length", VIRT_FLASH_SECTOR_SIZE); |
| qdev_prop_set_uint8(dev, "width", 4); |
| qdev_prop_set_uint8(dev, "device-width", 2); |
| qdev_prop_set_bit(dev, "big-endian", false); |
| qdev_prop_set_uint16(dev, "id0", 0x89); |
| qdev_prop_set_uint16(dev, "id1", 0x18); |
| qdev_prop_set_uint16(dev, "id2", 0x00); |
| qdev_prop_set_uint16(dev, "id3", 0x00); |
| qdev_prop_set_string(dev, "name", name); |
| |
| object_property_add_child(OBJECT(s), name, OBJECT(dev)); |
| object_property_add_alias(OBJECT(s), alias_prop_name, |
| OBJECT(dev), "drive"); |
| |
| return PFLASH_CFI01(dev); |
| } |
| |
| static void virt_flash_create(RISCVVirtState *s) |
| { |
| s->flash[0] = virt_flash_create1(s, "virt.flash0", "pflash0"); |
| s->flash[1] = virt_flash_create1(s, "virt.flash1", "pflash1"); |
| } |
| |
| static void virt_flash_map1(PFlashCFI01 *flash, |
| hwaddr base, hwaddr size, |
| MemoryRegion *sysmem) |
| { |
| DeviceState *dev = DEVICE(flash); |
| |
| assert(QEMU_IS_ALIGNED(size, VIRT_FLASH_SECTOR_SIZE)); |
| assert(size / VIRT_FLASH_SECTOR_SIZE <= UINT32_MAX); |
| qdev_prop_set_uint32(dev, "num-blocks", size / VIRT_FLASH_SECTOR_SIZE); |
| sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); |
| |
| memory_region_add_subregion(sysmem, base, |
| sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), |
| 0)); |
| } |
| |
| static void virt_flash_map(RISCVVirtState *s, |
| MemoryRegion *sysmem) |
| { |
| hwaddr flashsize = virt_memmap[VIRT_FLASH].size / 2; |
| hwaddr flashbase = virt_memmap[VIRT_FLASH].base; |
| |
| virt_flash_map1(s->flash[0], flashbase, flashsize, |
| sysmem); |
| virt_flash_map1(s->flash[1], flashbase + flashsize, flashsize, |
| sysmem); |
| } |
| |
| static void create_pcie_irq_map(RISCVVirtState *s, void *fdt, char *nodename, |
| uint32_t irqchip_phandle) |
| { |
| int pin, dev; |
| uint32_t irq_map_stride = 0; |
| uint32_t full_irq_map[GPEX_NUM_IRQS * GPEX_NUM_IRQS * |
| FDT_MAX_INT_MAP_WIDTH] = {}; |
| uint32_t *irq_map = full_irq_map; |
| |
| /* This code creates a standard swizzle of interrupts such that |
| * each device's first interrupt is based on it's PCI_SLOT number. |
| * (See pci_swizzle_map_irq_fn()) |
| * |
| * We only need one entry per interrupt in the table (not one per |
| * possible slot) seeing the interrupt-map-mask will allow the table |
| * to wrap to any number of devices. |
| */ |
| for (dev = 0; dev < GPEX_NUM_IRQS; dev++) { |
| int devfn = dev * 0x8; |
| |
| for (pin = 0; pin < GPEX_NUM_IRQS; pin++) { |
| int irq_nr = PCIE_IRQ + ((pin + PCI_SLOT(devfn)) % GPEX_NUM_IRQS); |
| int i = 0; |
| |
| /* Fill PCI address cells */ |
| irq_map[i] = cpu_to_be32(devfn << 8); |
| i += FDT_PCI_ADDR_CELLS; |
| |
| /* Fill PCI Interrupt cells */ |
| irq_map[i] = cpu_to_be32(pin + 1); |
| i += FDT_PCI_INT_CELLS; |
| |
| /* Fill interrupt controller phandle and cells */ |
| irq_map[i++] = cpu_to_be32(irqchip_phandle); |
| irq_map[i++] = cpu_to_be32(irq_nr); |
| if (s->aia_type != VIRT_AIA_TYPE_NONE) { |
| irq_map[i++] = cpu_to_be32(0x4); |
| } |
| |
| if (!irq_map_stride) { |
| irq_map_stride = i; |
| } |
| irq_map += irq_map_stride; |
| } |
| } |
| |
| qemu_fdt_setprop(fdt, nodename, "interrupt-map", full_irq_map, |
| GPEX_NUM_IRQS * GPEX_NUM_IRQS * |
| irq_map_stride * sizeof(uint32_t)); |
| |
| qemu_fdt_setprop_cells(fdt, nodename, "interrupt-map-mask", |
| 0x1800, 0, 0, 0x7); |
| } |
| |
| static void create_fdt_socket_cpus(RISCVVirtState *s, int socket, |
| char *clust_name, uint32_t *phandle, |
| bool is_32_bit, uint32_t *intc_phandles) |
| { |
| int cpu; |
| uint32_t cpu_phandle; |
| MachineState *mc = MACHINE(s); |
| char *name, *cpu_name, *core_name, *intc_name; |
| |
| for (cpu = s->soc[socket].num_harts - 1; cpu >= 0; cpu--) { |
| cpu_phandle = (*phandle)++; |
| |
| cpu_name = g_strdup_printf("/cpus/cpu@%d", |
| s->soc[socket].hartid_base + cpu); |
| qemu_fdt_add_subnode(mc->fdt, cpu_name); |
| qemu_fdt_setprop_string(mc->fdt, cpu_name, "mmu-type", |
| (is_32_bit) ? "riscv,sv32" : "riscv,sv48"); |
| name = riscv_isa_string(&s->soc[socket].harts[cpu]); |
| qemu_fdt_setprop_string(mc->fdt, cpu_name, "riscv,isa", name); |
| g_free(name); |
| qemu_fdt_setprop_string(mc->fdt, cpu_name, "compatible", "riscv"); |
| qemu_fdt_setprop_string(mc->fdt, cpu_name, "status", "okay"); |
| qemu_fdt_setprop_cell(mc->fdt, cpu_name, "reg", |
| s->soc[socket].hartid_base + cpu); |
| qemu_fdt_setprop_string(mc->fdt, cpu_name, "device_type", "cpu"); |
| riscv_socket_fdt_write_id(mc, mc->fdt, cpu_name, socket); |
| qemu_fdt_setprop_cell(mc->fdt, cpu_name, "phandle", cpu_phandle); |
| |
| intc_phandles[cpu] = (*phandle)++; |
| |
| intc_name = g_strdup_printf("%s/interrupt-controller", cpu_name); |
| qemu_fdt_add_subnode(mc->fdt, intc_name); |
| qemu_fdt_setprop_cell(mc->fdt, intc_name, "phandle", |
| intc_phandles[cpu]); |
| if (riscv_feature(&s->soc[socket].harts[cpu].env, |
| RISCV_FEATURE_AIA)) { |
| static const char * const compat[2] = { |
| "riscv,cpu-intc-aia", "riscv,cpu-intc" |
| }; |
| qemu_fdt_setprop_string_array(mc->fdt, intc_name, "compatible", |
| (char **)&compat, ARRAY_SIZE(compat)); |
| } else { |
| qemu_fdt_setprop_string(mc->fdt, intc_name, "compatible", |
| "riscv,cpu-intc"); |
| } |
| qemu_fdt_setprop(mc->fdt, intc_name, "interrupt-controller", NULL, 0); |
| qemu_fdt_setprop_cell(mc->fdt, intc_name, "#interrupt-cells", 1); |
| |
| core_name = g_strdup_printf("%s/core%d", clust_name, cpu); |
| qemu_fdt_add_subnode(mc->fdt, core_name); |
| qemu_fdt_setprop_cell(mc->fdt, core_name, "cpu", cpu_phandle); |
| |
| g_free(core_name); |
| g_free(intc_name); |
| g_free(cpu_name); |
| } |
| } |
| |
| static void create_fdt_socket_memory(RISCVVirtState *s, |
| const MemMapEntry *memmap, int socket) |
| { |
| char *mem_name; |
| uint64_t addr, size; |
| MachineState *mc = MACHINE(s); |
| |
| addr = memmap[VIRT_DRAM].base + riscv_socket_mem_offset(mc, socket); |
| size = riscv_socket_mem_size(mc, socket); |
| mem_name = g_strdup_printf("/memory@%lx", (long)addr); |
| qemu_fdt_add_subnode(mc->fdt, mem_name); |
| qemu_fdt_setprop_cells(mc->fdt, mem_name, "reg", |
| addr >> 32, addr, size >> 32, size); |
| qemu_fdt_setprop_string(mc->fdt, mem_name, "device_type", "memory"); |
| riscv_socket_fdt_write_id(mc, mc->fdt, mem_name, socket); |
| g_free(mem_name); |
| } |
| |
| static void create_fdt_socket_clint(RISCVVirtState *s, |
| const MemMapEntry *memmap, int socket, |
| uint32_t *intc_phandles) |
| { |
| int cpu; |
| char *clint_name; |
| uint32_t *clint_cells; |
| unsigned long clint_addr; |
| MachineState *mc = MACHINE(s); |
| static const char * const clint_compat[2] = { |
| "sifive,clint0", "riscv,clint0" |
| }; |
| |
| clint_cells = g_new0(uint32_t, s->soc[socket].num_harts * 4); |
| |
| for (cpu = 0; cpu < s->soc[socket].num_harts; cpu++) { |
| clint_cells[cpu * 4 + 0] = cpu_to_be32(intc_phandles[cpu]); |
| clint_cells[cpu * 4 + 1] = cpu_to_be32(IRQ_M_SOFT); |
| clint_cells[cpu * 4 + 2] = cpu_to_be32(intc_phandles[cpu]); |
| clint_cells[cpu * 4 + 3] = cpu_to_be32(IRQ_M_TIMER); |
| } |
| |
| clint_addr = memmap[VIRT_CLINT].base + (memmap[VIRT_CLINT].size * socket); |
| clint_name = g_strdup_printf("/soc/clint@%lx", clint_addr); |
| qemu_fdt_add_subnode(mc->fdt, clint_name); |
| qemu_fdt_setprop_string_array(mc->fdt, clint_name, "compatible", |
| (char **)&clint_compat, |
| ARRAY_SIZE(clint_compat)); |
| qemu_fdt_setprop_cells(mc->fdt, clint_name, "reg", |
| 0x0, clint_addr, 0x0, memmap[VIRT_CLINT].size); |
| qemu_fdt_setprop(mc->fdt, clint_name, "interrupts-extended", |
| clint_cells, s->soc[socket].num_harts * sizeof(uint32_t) * 4); |
| riscv_socket_fdt_write_id(mc, mc->fdt, clint_name, socket); |
| g_free(clint_name); |
| |
| g_free(clint_cells); |
| } |
| |
| static void create_fdt_socket_aclint(RISCVVirtState *s, |
| const MemMapEntry *memmap, int socket, |
| uint32_t *intc_phandles) |
| { |
| int cpu; |
| char *name; |
| unsigned long addr; |
| uint32_t aclint_cells_size; |
| uint32_t *aclint_mswi_cells; |
| uint32_t *aclint_sswi_cells; |
| uint32_t *aclint_mtimer_cells; |
| MachineState *mc = MACHINE(s); |
| |
| aclint_mswi_cells = g_new0(uint32_t, s->soc[socket].num_harts * 2); |
| aclint_mtimer_cells = g_new0(uint32_t, s->soc[socket].num_harts * 2); |
| aclint_sswi_cells = g_new0(uint32_t, s->soc[socket].num_harts * 2); |
| |
| for (cpu = 0; cpu < s->soc[socket].num_harts; cpu++) { |
| aclint_mswi_cells[cpu * 2 + 0] = cpu_to_be32(intc_phandles[cpu]); |
| aclint_mswi_cells[cpu * 2 + 1] = cpu_to_be32(IRQ_M_SOFT); |
| aclint_mtimer_cells[cpu * 2 + 0] = cpu_to_be32(intc_phandles[cpu]); |
| aclint_mtimer_cells[cpu * 2 + 1] = cpu_to_be32(IRQ_M_TIMER); |
| aclint_sswi_cells[cpu * 2 + 0] = cpu_to_be32(intc_phandles[cpu]); |
| aclint_sswi_cells[cpu * 2 + 1] = cpu_to_be32(IRQ_S_SOFT); |
| } |
| aclint_cells_size = s->soc[socket].num_harts * sizeof(uint32_t) * 2; |
| |
| addr = memmap[VIRT_CLINT].base + (memmap[VIRT_CLINT].size * socket); |
| name = g_strdup_printf("/soc/mswi@%lx", addr); |
| qemu_fdt_add_subnode(mc->fdt, name); |
| qemu_fdt_setprop_string(mc->fdt, name, "compatible", "riscv,aclint-mswi"); |
| qemu_fdt_setprop_cells(mc->fdt, name, "reg", |
| 0x0, addr, 0x0, RISCV_ACLINT_SWI_SIZE); |
| qemu_fdt_setprop(mc->fdt, name, "interrupts-extended", |
| aclint_mswi_cells, aclint_cells_size); |
| qemu_fdt_setprop(mc->fdt, name, "interrupt-controller", NULL, 0); |
| qemu_fdt_setprop_cell(mc->fdt, name, "#interrupt-cells", 0); |
| riscv_socket_fdt_write_id(mc, mc->fdt, name, socket); |
| g_free(name); |
| |
| addr = memmap[VIRT_CLINT].base + RISCV_ACLINT_SWI_SIZE + |
| (memmap[VIRT_CLINT].size * socket); |
| name = g_strdup_printf("/soc/mtimer@%lx", addr); |
| qemu_fdt_add_subnode(mc->fdt, name); |
| qemu_fdt_setprop_string(mc->fdt, name, "compatible", |
| "riscv,aclint-mtimer"); |
| qemu_fdt_setprop_cells(mc->fdt, name, "reg", |
| 0x0, addr + RISCV_ACLINT_DEFAULT_MTIME, |
| 0x0, memmap[VIRT_CLINT].size - RISCV_ACLINT_SWI_SIZE - |
| RISCV_ACLINT_DEFAULT_MTIME, |
| 0x0, addr + RISCV_ACLINT_DEFAULT_MTIMECMP, |
| 0x0, RISCV_ACLINT_DEFAULT_MTIME); |
| qemu_fdt_setprop(mc->fdt, name, "interrupts-extended", |
| aclint_mtimer_cells, aclint_cells_size); |
| riscv_socket_fdt_write_id(mc, mc->fdt, name, socket); |
| g_free(name); |
| |
| addr = memmap[VIRT_ACLINT_SSWI].base + |
| (memmap[VIRT_ACLINT_SSWI].size * socket); |
| name = g_strdup_printf("/soc/sswi@%lx", addr); |
| qemu_fdt_add_subnode(mc->fdt, name); |
| qemu_fdt_setprop_string(mc->fdt, name, "compatible", "riscv,aclint-sswi"); |
| qemu_fdt_setprop_cells(mc->fdt, name, "reg", |
| 0x0, addr, 0x0, memmap[VIRT_ACLINT_SSWI].size); |
| qemu_fdt_setprop(mc->fdt, name, "interrupts-extended", |
| aclint_sswi_cells, aclint_cells_size); |
| qemu_fdt_setprop(mc->fdt, name, "interrupt-controller", NULL, 0); |
| qemu_fdt_setprop_cell(mc->fdt, name, "#interrupt-cells", 0); |
| riscv_socket_fdt_write_id(mc, mc->fdt, name, socket); |
| g_free(name); |
| |
| g_free(aclint_mswi_cells); |
| g_free(aclint_mtimer_cells); |
| g_free(aclint_sswi_cells); |
| } |
| |
| static void create_fdt_socket_plic(RISCVVirtState *s, |
| const MemMapEntry *memmap, int socket, |
| uint32_t *phandle, uint32_t *intc_phandles, |
| uint32_t *plic_phandles) |
| { |
| int cpu; |
| char *plic_name; |
| uint32_t *plic_cells; |
| unsigned long plic_addr; |
| MachineState *mc = MACHINE(s); |
| static const char * const plic_compat[2] = { |
| "sifive,plic-1.0.0", "riscv,plic0" |
| }; |
| |
| if (kvm_enabled()) { |
| plic_cells = g_new0(uint32_t, s->soc[socket].num_harts * 2); |
| } else { |
| plic_cells = g_new0(uint32_t, s->soc[socket].num_harts * 4); |
| } |
| |
| for (cpu = 0; cpu < s->soc[socket].num_harts; cpu++) { |
| if (kvm_enabled()) { |
| plic_cells[cpu * 2 + 0] = cpu_to_be32(intc_phandles[cpu]); |
| plic_cells[cpu * 2 + 1] = cpu_to_be32(IRQ_S_EXT); |
| } else { |
| plic_cells[cpu * 4 + 0] = cpu_to_be32(intc_phandles[cpu]); |
| plic_cells[cpu * 4 + 1] = cpu_to_be32(IRQ_M_EXT); |
| plic_cells[cpu * 4 + 2] = cpu_to_be32(intc_phandles[cpu]); |
| plic_cells[cpu * 4 + 3] = cpu_to_be32(IRQ_S_EXT); |
| } |
| } |
| |
| plic_phandles[socket] = (*phandle)++; |
| plic_addr = memmap[VIRT_PLIC].base + (memmap[VIRT_PLIC].size * socket); |
| plic_name = g_strdup_printf("/soc/plic@%lx", plic_addr); |
| qemu_fdt_add_subnode(mc->fdt, plic_name); |
| qemu_fdt_setprop_cell(mc->fdt, plic_name, |
| "#interrupt-cells", FDT_PLIC_INT_CELLS); |
| qemu_fdt_setprop_string_array(mc->fdt, plic_name, "compatible", |
| (char **)&plic_compat, |
| ARRAY_SIZE(plic_compat)); |
| qemu_fdt_setprop(mc->fdt, plic_name, "interrupt-controller", NULL, 0); |
| qemu_fdt_setprop(mc->fdt, plic_name, "interrupts-extended", |
| plic_cells, s->soc[socket].num_harts * sizeof(uint32_t) * 4); |
| qemu_fdt_setprop_cells(mc->fdt, plic_name, "reg", |
| 0x0, plic_addr, 0x0, memmap[VIRT_PLIC].size); |
| qemu_fdt_setprop_cell(mc->fdt, plic_name, "riscv,ndev", VIRTIO_NDEV); |
| riscv_socket_fdt_write_id(mc, mc->fdt, plic_name, socket); |
| qemu_fdt_setprop_cell(mc->fdt, plic_name, "phandle", |
| plic_phandles[socket]); |
| g_free(plic_name); |
| |
| g_free(plic_cells); |
| } |
| |
| static void create_fdt_socket_aia(RISCVVirtState *s, |
| const MemMapEntry *memmap, int socket, |
| uint32_t *phandle, uint32_t *intc_phandles, |
| uint32_t *aplic_phandles) |
| { |
| int cpu; |
| char *aplic_name; |
| uint32_t *aplic_cells; |
| unsigned long aplic_addr; |
| MachineState *mc = MACHINE(s); |
| uint32_t aplic_m_phandle, aplic_s_phandle; |
| |
| aplic_m_phandle = (*phandle)++; |
| aplic_s_phandle = (*phandle)++; |
| aplic_cells = g_new0(uint32_t, s->soc[socket].num_harts * 2); |
| |
| /* M-level APLIC node */ |
| for (cpu = 0; cpu < s->soc[socket].num_harts; cpu++) { |
| aplic_cells[cpu * 2 + 0] = cpu_to_be32(intc_phandles[cpu]); |
| aplic_cells[cpu * 2 + 1] = cpu_to_be32(IRQ_M_EXT); |
| } |
| aplic_addr = memmap[VIRT_APLIC_M].base + |
| (memmap[VIRT_APLIC_M].size * socket); |
| aplic_name = g_strdup_printf("/soc/aplic@%lx", aplic_addr); |
| qemu_fdt_add_subnode(mc->fdt, aplic_name); |
| qemu_fdt_setprop_string(mc->fdt, aplic_name, "compatible", "riscv,aplic"); |
| qemu_fdt_setprop_cell(mc->fdt, aplic_name, |
| "#interrupt-cells", FDT_APLIC_INT_CELLS); |
| qemu_fdt_setprop(mc->fdt, aplic_name, "interrupt-controller", NULL, 0); |
| qemu_fdt_setprop(mc->fdt, aplic_name, "interrupts-extended", |
| aplic_cells, s->soc[socket].num_harts * sizeof(uint32_t) * 2); |
| qemu_fdt_setprop_cells(mc->fdt, aplic_name, "reg", |
| 0x0, aplic_addr, 0x0, memmap[VIRT_APLIC_M].size); |
| qemu_fdt_setprop_cell(mc->fdt, aplic_name, "riscv,num-sources", |
| VIRT_IRQCHIP_NUM_SOURCES); |
| qemu_fdt_setprop_cell(mc->fdt, aplic_name, "riscv,children", |
| aplic_s_phandle); |
| qemu_fdt_setprop_cells(mc->fdt, aplic_name, "riscv,delegate", |
| aplic_s_phandle, 0x1, VIRT_IRQCHIP_NUM_SOURCES); |
| riscv_socket_fdt_write_id(mc, mc->fdt, aplic_name, socket); |
| qemu_fdt_setprop_cell(mc->fdt, aplic_name, "phandle", aplic_m_phandle); |
| g_free(aplic_name); |
| |
| /* S-level APLIC node */ |
| for (cpu = 0; cpu < s->soc[socket].num_harts; cpu++) { |
| aplic_cells[cpu * 2 + 0] = cpu_to_be32(intc_phandles[cpu]); |
| aplic_cells[cpu * 2 + 1] = cpu_to_be32(IRQ_S_EXT); |
| } |
| aplic_addr = memmap[VIRT_APLIC_S].base + |
| (memmap[VIRT_APLIC_S].size * socket); |
| aplic_name = g_strdup_printf("/soc/aplic@%lx", aplic_addr); |
| qemu_fdt_add_subnode(mc->fdt, aplic_name); |
| qemu_fdt_setprop_string(mc->fdt, aplic_name, "compatible", "riscv,aplic"); |
| qemu_fdt_setprop_cell(mc->fdt, aplic_name, |
| "#interrupt-cells", FDT_APLIC_INT_CELLS); |
| qemu_fdt_setprop(mc->fdt, aplic_name, "interrupt-controller", NULL, 0); |
| qemu_fdt_setprop(mc->fdt, aplic_name, "interrupts-extended", |
| aplic_cells, s->soc[socket].num_harts * sizeof(uint32_t) * 2); |
| qemu_fdt_setprop_cells(mc->fdt, aplic_name, "reg", |
| 0x0, aplic_addr, 0x0, memmap[VIRT_APLIC_S].size); |
| qemu_fdt_setprop_cell(mc->fdt, aplic_name, "riscv,num-sources", |
| VIRT_IRQCHIP_NUM_SOURCES); |
| riscv_socket_fdt_write_id(mc, mc->fdt, aplic_name, socket); |
| qemu_fdt_setprop_cell(mc->fdt, aplic_name, "phandle", aplic_s_phandle); |
| g_free(aplic_name); |
| |
| g_free(aplic_cells); |
| aplic_phandles[socket] = aplic_s_phandle; |
| } |
| |
| static void create_fdt_sockets(RISCVVirtState *s, const MemMapEntry *memmap, |
| bool is_32_bit, uint32_t *phandle, |
| uint32_t *irq_mmio_phandle, |
| uint32_t *irq_pcie_phandle, |
| uint32_t *irq_virtio_phandle) |
| { |
| int socket; |
| char *clust_name; |
| uint32_t *intc_phandles; |
| MachineState *mc = MACHINE(s); |
| uint32_t xplic_phandles[MAX_NODES]; |
| |
| qemu_fdt_add_subnode(mc->fdt, "/cpus"); |
| qemu_fdt_setprop_cell(mc->fdt, "/cpus", "timebase-frequency", |
| RISCV_ACLINT_DEFAULT_TIMEBASE_FREQ); |
| qemu_fdt_setprop_cell(mc->fdt, "/cpus", "#size-cells", 0x0); |
| qemu_fdt_setprop_cell(mc->fdt, "/cpus", "#address-cells", 0x1); |
| qemu_fdt_add_subnode(mc->fdt, "/cpus/cpu-map"); |
| |
| for (socket = (riscv_socket_count(mc) - 1); socket >= 0; socket--) { |
| clust_name = g_strdup_printf("/cpus/cpu-map/cluster%d", socket); |
| qemu_fdt_add_subnode(mc->fdt, clust_name); |
| |
| intc_phandles = g_new0(uint32_t, s->soc[socket].num_harts); |
| |
| create_fdt_socket_cpus(s, socket, clust_name, phandle, |
| is_32_bit, intc_phandles); |
| |
| create_fdt_socket_memory(s, memmap, socket); |
| |
| if (!kvm_enabled()) { |
| if (s->have_aclint) { |
| create_fdt_socket_aclint(s, memmap, socket, intc_phandles); |
| } else { |
| create_fdt_socket_clint(s, memmap, socket, intc_phandles); |
| } |
| } |
| |
| if (s->aia_type == VIRT_AIA_TYPE_NONE) { |
| create_fdt_socket_plic(s, memmap, socket, phandle, |
| intc_phandles, xplic_phandles); |
| } else { |
| create_fdt_socket_aia(s, memmap, socket, phandle, |
| intc_phandles, xplic_phandles); |
| } |
| |
| g_free(intc_phandles); |
| g_free(clust_name); |
| } |
| |
| for (socket = 0; socket < riscv_socket_count(mc); socket++) { |
| if (socket == 0) { |
| *irq_mmio_phandle = xplic_phandles[socket]; |
| *irq_virtio_phandle = xplic_phandles[socket]; |
| *irq_pcie_phandle = xplic_phandles[socket]; |
| } |
| if (socket == 1) { |
| *irq_virtio_phandle = xplic_phandles[socket]; |
| *irq_pcie_phandle = xplic_phandles[socket]; |
| } |
| if (socket == 2) { |
| *irq_pcie_phandle = xplic_phandles[socket]; |
| } |
| } |
| |
| riscv_socket_fdt_write_distance_matrix(mc, mc->fdt); |
| } |
| |
| static void create_fdt_virtio(RISCVVirtState *s, const MemMapEntry *memmap, |
| uint32_t irq_virtio_phandle) |
| { |
| int i; |
| char *name; |
| MachineState *mc = MACHINE(s); |
| |
| for (i = 0; i < VIRTIO_COUNT; i++) { |
| name = g_strdup_printf("/soc/virtio_mmio@%lx", |
| (long)(memmap[VIRT_VIRTIO].base + i * memmap[VIRT_VIRTIO].size)); |
| qemu_fdt_add_subnode(mc->fdt, name); |
| qemu_fdt_setprop_string(mc->fdt, name, "compatible", "virtio,mmio"); |
| qemu_fdt_setprop_cells(mc->fdt, name, "reg", |
| 0x0, memmap[VIRT_VIRTIO].base + i * memmap[VIRT_VIRTIO].size, |
| 0x0, memmap[VIRT_VIRTIO].size); |
| qemu_fdt_setprop_cell(mc->fdt, name, "interrupt-parent", |
| irq_virtio_phandle); |
| if (s->aia_type == VIRT_AIA_TYPE_NONE) { |
| qemu_fdt_setprop_cell(mc->fdt, name, "interrupts", |
| VIRTIO_IRQ + i); |
| } else { |
| qemu_fdt_setprop_cells(mc->fdt, name, "interrupts", |
| VIRTIO_IRQ + i, 0x4); |
| } |
| g_free(name); |
| } |
| } |
| |
| static void create_fdt_pcie(RISCVVirtState *s, const MemMapEntry *memmap, |
| uint32_t irq_pcie_phandle) |
| { |
| char *name; |
| MachineState *mc = MACHINE(s); |
| |
| name = g_strdup_printf("/soc/pci@%lx", |
| (long) memmap[VIRT_PCIE_ECAM].base); |
| qemu_fdt_add_subnode(mc->fdt, name); |
| qemu_fdt_setprop_cell(mc->fdt, name, "#address-cells", |
| FDT_PCI_ADDR_CELLS); |
| qemu_fdt_setprop_cell(mc->fdt, name, "#interrupt-cells", |
| FDT_PCI_INT_CELLS); |
| qemu_fdt_setprop_cell(mc->fdt, name, "#size-cells", 0x2); |
| qemu_fdt_setprop_string(mc->fdt, name, "compatible", |
| "pci-host-ecam-generic"); |
| qemu_fdt_setprop_string(mc->fdt, name, "device_type", "pci"); |
| qemu_fdt_setprop_cell(mc->fdt, name, "linux,pci-domain", 0); |
| qemu_fdt_setprop_cells(mc->fdt, name, "bus-range", 0, |
| memmap[VIRT_PCIE_ECAM].size / PCIE_MMCFG_SIZE_MIN - 1); |
| qemu_fdt_setprop(mc->fdt, name, "dma-coherent", NULL, 0); |
| qemu_fdt_setprop_cells(mc->fdt, name, "reg", 0, |
| memmap[VIRT_PCIE_ECAM].base, 0, memmap[VIRT_PCIE_ECAM].size); |
| qemu_fdt_setprop_sized_cells(mc->fdt, name, "ranges", |
| 1, FDT_PCI_RANGE_IOPORT, 2, 0, |
| 2, memmap[VIRT_PCIE_PIO].base, 2, memmap[VIRT_PCIE_PIO].size, |
| 1, FDT_PCI_RANGE_MMIO, |
| 2, memmap[VIRT_PCIE_MMIO].base, |
| 2, memmap[VIRT_PCIE_MMIO].base, 2, memmap[VIRT_PCIE_MMIO].size, |
| 1, FDT_PCI_RANGE_MMIO_64BIT, |
| 2, virt_high_pcie_memmap.base, |
| 2, virt_high_pcie_memmap.base, 2, virt_high_pcie_memmap.size); |
| |
| create_pcie_irq_map(s, mc->fdt, name, irq_pcie_phandle); |
| g_free(name); |
| } |
| |
| static void create_fdt_reset(RISCVVirtState *s, const MemMapEntry *memmap, |
| uint32_t *phandle) |
| { |
| char *name; |
| uint32_t test_phandle; |
| MachineState *mc = MACHINE(s); |
| |
| test_phandle = (*phandle)++; |
| name = g_strdup_printf("/soc/test@%lx", |
| (long)memmap[VIRT_TEST].base); |
| qemu_fdt_add_subnode(mc->fdt, name); |
| { |
| static const char * const compat[3] = { |
| "sifive,test1", "sifive,test0", "syscon" |
| }; |
| qemu_fdt_setprop_string_array(mc->fdt, name, "compatible", |
| (char **)&compat, ARRAY_SIZE(compat)); |
| } |
| qemu_fdt_setprop_cells(mc->fdt, name, "reg", |
| 0x0, memmap[VIRT_TEST].base, 0x0, memmap[VIRT_TEST].size); |
| qemu_fdt_setprop_cell(mc->fdt, name, "phandle", test_phandle); |
| test_phandle = qemu_fdt_get_phandle(mc->fdt, name); |
| g_free(name); |
| |
| name = g_strdup_printf("/soc/reboot"); |
| qemu_fdt_add_subnode(mc->fdt, name); |
| qemu_fdt_setprop_string(mc->fdt, name, "compatible", "syscon-reboot"); |
| qemu_fdt_setprop_cell(mc->fdt, name, "regmap", test_phandle); |
| qemu_fdt_setprop_cell(mc->fdt, name, "offset", 0x0); |
| qemu_fdt_setprop_cell(mc->fdt, name, "value", FINISHER_RESET); |
| g_free(name); |
| |
| name = g_strdup_printf("/soc/poweroff"); |
| qemu_fdt_add_subnode(mc->fdt, name); |
| qemu_fdt_setprop_string(mc->fdt, name, "compatible", "syscon-poweroff"); |
| qemu_fdt_setprop_cell(mc->fdt, name, "regmap", test_phandle); |
| qemu_fdt_setprop_cell(mc->fdt, name, "offset", 0x0); |
| qemu_fdt_setprop_cell(mc->fdt, name, "value", FINISHER_PASS); |
| g_free(name); |
| } |
| |
| static void create_fdt_uart(RISCVVirtState *s, const MemMapEntry *memmap, |
| uint32_t irq_mmio_phandle) |
| { |
| char *name; |
| MachineState *mc = MACHINE(s); |
| |
| name = g_strdup_printf("/soc/uart@%lx", (long)memmap[VIRT_UART0].base); |
| qemu_fdt_add_subnode(mc->fdt, name); |
| qemu_fdt_setprop_string(mc->fdt, name, "compatible", "ns16550a"); |
| qemu_fdt_setprop_cells(mc->fdt, name, "reg", |
| 0x0, memmap[VIRT_UART0].base, |
| 0x0, memmap[VIRT_UART0].size); |
| qemu_fdt_setprop_cell(mc->fdt, name, "clock-frequency", 3686400); |
| qemu_fdt_setprop_cell(mc->fdt, name, "interrupt-parent", irq_mmio_phandle); |
| if (s->aia_type == VIRT_AIA_TYPE_NONE) { |
| qemu_fdt_setprop_cell(mc->fdt, name, "interrupts", UART0_IRQ); |
| } else { |
| qemu_fdt_setprop_cells(mc->fdt, name, "interrupts", UART0_IRQ, 0x4); |
| } |
| |
| qemu_fdt_add_subnode(mc->fdt, "/chosen"); |
| qemu_fdt_setprop_string(mc->fdt, "/chosen", "stdout-path", name); |
| g_free(name); |
| } |
| |
| static void create_fdt_rtc(RISCVVirtState *s, const MemMapEntry *memmap, |
| uint32_t irq_mmio_phandle) |
| { |
| char *name; |
| MachineState *mc = MACHINE(s); |
| |
| name = g_strdup_printf("/soc/rtc@%lx", (long)memmap[VIRT_RTC].base); |
| qemu_fdt_add_subnode(mc->fdt, name); |
| qemu_fdt_setprop_string(mc->fdt, name, "compatible", |
| "google,goldfish-rtc"); |
| qemu_fdt_setprop_cells(mc->fdt, name, "reg", |
| 0x0, memmap[VIRT_RTC].base, 0x0, memmap[VIRT_RTC].size); |
| qemu_fdt_setprop_cell(mc->fdt, name, "interrupt-parent", |
| irq_mmio_phandle); |
| if (s->aia_type == VIRT_AIA_TYPE_NONE) { |
| qemu_fdt_setprop_cell(mc->fdt, name, "interrupts", RTC_IRQ); |
| } else { |
| qemu_fdt_setprop_cells(mc->fdt, name, "interrupts", RTC_IRQ, 0x4); |
| } |
| g_free(name); |
| } |
| |
| static void create_fdt_flash(RISCVVirtState *s, const MemMapEntry *memmap) |
| { |
| char *name; |
| MachineState *mc = MACHINE(s); |
| hwaddr flashsize = virt_memmap[VIRT_FLASH].size / 2; |
| hwaddr flashbase = virt_memmap[VIRT_FLASH].base; |
| |
| name = g_strdup_printf("/flash@%" PRIx64, flashbase); |
| qemu_fdt_add_subnode(mc->fdt, name); |
| qemu_fdt_setprop_string(mc->fdt, name, "compatible", "cfi-flash"); |
| qemu_fdt_setprop_sized_cells(mc->fdt, name, "reg", |
| 2, flashbase, 2, flashsize, |
| 2, flashbase + flashsize, 2, flashsize); |
| qemu_fdt_setprop_cell(mc->fdt, name, "bank-width", 4); |
| g_free(name); |
| } |
| |
| static void create_fdt(RISCVVirtState *s, const MemMapEntry *memmap, |
| uint64_t mem_size, const char *cmdline, bool is_32_bit) |
| { |
| MachineState *mc = MACHINE(s); |
| uint32_t phandle = 1, irq_mmio_phandle = 1; |
| uint32_t irq_pcie_phandle = 1, irq_virtio_phandle = 1; |
| |
| if (mc->dtb) { |
| mc->fdt = load_device_tree(mc->dtb, &s->fdt_size); |
| if (!mc->fdt) { |
| error_report("load_device_tree() failed"); |
| exit(1); |
| } |
| goto update_bootargs; |
| } else { |
| mc->fdt = create_device_tree(&s->fdt_size); |
| if (!mc->fdt) { |
| error_report("create_device_tree() failed"); |
| exit(1); |
| } |
| } |
| |
| qemu_fdt_setprop_string(mc->fdt, "/", "model", "riscv-virtio,qemu"); |
| qemu_fdt_setprop_string(mc->fdt, "/", "compatible", "riscv-virtio"); |
| qemu_fdt_setprop_cell(mc->fdt, "/", "#size-cells", 0x2); |
| qemu_fdt_setprop_cell(mc->fdt, "/", "#address-cells", 0x2); |
| |
| qemu_fdt_add_subnode(mc->fdt, "/soc"); |
| qemu_fdt_setprop(mc->fdt, "/soc", "ranges", NULL, 0); |
| qemu_fdt_setprop_string(mc->fdt, "/soc", "compatible", "simple-bus"); |
| qemu_fdt_setprop_cell(mc->fdt, "/soc", "#size-cells", 0x2); |
| qemu_fdt_setprop_cell(mc->fdt, "/soc", "#address-cells", 0x2); |
| |
| create_fdt_sockets(s, memmap, is_32_bit, &phandle, |
| &irq_mmio_phandle, &irq_pcie_phandle, &irq_virtio_phandle); |
| |
| create_fdt_virtio(s, memmap, irq_virtio_phandle); |
| |
| create_fdt_pcie(s, memmap, irq_pcie_phandle); |
| |
| create_fdt_reset(s, memmap, &phandle); |
| |
| create_fdt_uart(s, memmap, irq_mmio_phandle); |
| |
| create_fdt_rtc(s, memmap, irq_mmio_phandle); |
| |
| create_fdt_flash(s, memmap); |
| |
| update_bootargs: |
| if (cmdline) { |
| qemu_fdt_setprop_string(mc->fdt, "/chosen", "bootargs", cmdline); |
| } |
| } |
| |
| static inline DeviceState *gpex_pcie_init(MemoryRegion *sys_mem, |
| hwaddr ecam_base, hwaddr ecam_size, |
| hwaddr mmio_base, hwaddr mmio_size, |
| hwaddr high_mmio_base, |
| hwaddr high_mmio_size, |
| hwaddr pio_base, |
| DeviceState *irqchip) |
| { |
| DeviceState *dev; |
| MemoryRegion *ecam_alias, *ecam_reg; |
| MemoryRegion *mmio_alias, *high_mmio_alias, *mmio_reg; |
| qemu_irq irq; |
| int i; |
| |
| dev = qdev_new(TYPE_GPEX_HOST); |
| |
| sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); |
| |
| ecam_alias = g_new0(MemoryRegion, 1); |
| ecam_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0); |
| memory_region_init_alias(ecam_alias, OBJECT(dev), "pcie-ecam", |
| ecam_reg, 0, ecam_size); |
| memory_region_add_subregion(get_system_memory(), ecam_base, ecam_alias); |
| |
| mmio_alias = g_new0(MemoryRegion, 1); |
| mmio_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 1); |
| memory_region_init_alias(mmio_alias, OBJECT(dev), "pcie-mmio", |
| mmio_reg, mmio_base, mmio_size); |
| memory_region_add_subregion(get_system_memory(), mmio_base, mmio_alias); |
| |
| /* Map high MMIO space */ |
| high_mmio_alias = g_new0(MemoryRegion, 1); |
| memory_region_init_alias(high_mmio_alias, OBJECT(dev), "pcie-mmio-high", |
| mmio_reg, high_mmio_base, high_mmio_size); |
| memory_region_add_subregion(get_system_memory(), high_mmio_base, |
| high_mmio_alias); |
| |
| sysbus_mmio_map(SYS_BUS_DEVICE(dev), 2, pio_base); |
| |
| for (i = 0; i < GPEX_NUM_IRQS; i++) { |
| irq = qdev_get_gpio_in(irqchip, PCIE_IRQ + i); |
| |
| sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, irq); |
| gpex_set_irq_num(GPEX_HOST(dev), i, PCIE_IRQ + i); |
| } |
| |
| return dev; |
| } |
| |
| static FWCfgState *create_fw_cfg(const MachineState *mc) |
| { |
| hwaddr base = virt_memmap[VIRT_FW_CFG].base; |
| hwaddr size = virt_memmap[VIRT_FW_CFG].size; |
| FWCfgState *fw_cfg; |
| char *nodename; |
| |
| fw_cfg = fw_cfg_init_mem_wide(base + 8, base, 8, base + 16, |
| &address_space_memory); |
| fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, (uint16_t)mc->smp.cpus); |
| |
| nodename = g_strdup_printf("/fw-cfg@%" PRIx64, base); |
| qemu_fdt_add_subnode(mc->fdt, nodename); |
| qemu_fdt_setprop_string(mc->fdt, nodename, |
| "compatible", "qemu,fw-cfg-mmio"); |
| qemu_fdt_setprop_sized_cells(mc->fdt, nodename, "reg", |
| 2, base, 2, size); |
| qemu_fdt_setprop(mc->fdt, nodename, "dma-coherent", NULL, 0); |
| g_free(nodename); |
| return fw_cfg; |
| } |
| |
| static DeviceState *virt_create_plic(const MemMapEntry *memmap, int socket, |
| int base_hartid, int hart_count) |
| { |
| DeviceState *ret; |
| char *plic_hart_config; |
| |
| /* Per-socket PLIC hart topology configuration string */ |
| plic_hart_config = riscv_plic_hart_config_string(hart_count); |
| |
| /* Per-socket PLIC */ |
| ret = sifive_plic_create( |
| memmap[VIRT_PLIC].base + socket * memmap[VIRT_PLIC].size, |
| plic_hart_config, hart_count, base_hartid, |
| VIRT_IRQCHIP_NUM_SOURCES, |
| ((1U << VIRT_IRQCHIP_NUM_PRIO_BITS) - 1), |
| VIRT_PLIC_PRIORITY_BASE, |
| VIRT_PLIC_PENDING_BASE, |
| VIRT_PLIC_ENABLE_BASE, |
| VIRT_PLIC_ENABLE_STRIDE, |
| VIRT_PLIC_CONTEXT_BASE, |
| VIRT_PLIC_CONTEXT_STRIDE, |
| memmap[VIRT_PLIC].size); |
| |
| g_free(plic_hart_config); |
| |
| return ret; |
| } |
| |
| static DeviceState *virt_create_aia(RISCVVirtAIAType aia_type, |
| const MemMapEntry *memmap, int socket, |
| int base_hartid, int hart_count) |
| { |
| DeviceState *aplic_m; |
| |
| /* Per-socket M-level APLIC */ |
| aplic_m = riscv_aplic_create( |
| memmap[VIRT_APLIC_M].base + socket * memmap[VIRT_APLIC_M].size, |
| memmap[VIRT_APLIC_M].size, |
| base_hartid, hart_count, |
| VIRT_IRQCHIP_NUM_SOURCES, |
| VIRT_IRQCHIP_NUM_PRIO_BITS, |
| false, true, NULL); |
| |
| if (aplic_m) { |
| /* Per-socket S-level APLIC */ |
| riscv_aplic_create( |
| memmap[VIRT_APLIC_S].base + socket * memmap[VIRT_APLIC_S].size, |
| memmap[VIRT_APLIC_S].size, |
| base_hartid, hart_count, |
| VIRT_IRQCHIP_NUM_SOURCES, |
| VIRT_IRQCHIP_NUM_PRIO_BITS, |
| false, false, aplic_m); |
| } |
| |
| return aplic_m; |
| } |
| |
| static void virt_machine_init(MachineState *machine) |
| { |
| const MemMapEntry *memmap = virt_memmap; |
| RISCVVirtState *s = RISCV_VIRT_MACHINE(machine); |
| MemoryRegion *system_memory = get_system_memory(); |
| MemoryRegion *mask_rom = g_new(MemoryRegion, 1); |
| char *soc_name; |
| target_ulong start_addr = memmap[VIRT_DRAM].base; |
| target_ulong firmware_end_addr, kernel_start_addr; |
| uint32_t fdt_load_addr; |
| uint64_t kernel_entry; |
| DeviceState *mmio_irqchip, *virtio_irqchip, *pcie_irqchip; |
| int i, base_hartid, hart_count; |
| |
| /* Check socket count limit */ |
| if (VIRT_SOCKETS_MAX < riscv_socket_count(machine)) { |
| error_report("number of sockets/nodes should be less than %d", |
| VIRT_SOCKETS_MAX); |
| exit(1); |
| } |
| |
| /* Initialize sockets */ |
| mmio_irqchip = virtio_irqchip = pcie_irqchip = NULL; |
| for (i = 0; i < riscv_socket_count(machine); i++) { |
| if (!riscv_socket_check_hartids(machine, i)) { |
| error_report("discontinuous hartids in socket%d", i); |
| exit(1); |
| } |
| |
| base_hartid = riscv_socket_first_hartid(machine, i); |
| if (base_hartid < 0) { |
| error_report("can't find hartid base for socket%d", i); |
| exit(1); |
| } |
| |
| hart_count = riscv_socket_hart_count(machine, i); |
| if (hart_count < 0) { |
| error_report("can't find hart count for socket%d", i); |
| exit(1); |
| } |
| |
| soc_name = g_strdup_printf("soc%d", i); |
| object_initialize_child(OBJECT(machine), soc_name, &s->soc[i], |
| TYPE_RISCV_HART_ARRAY); |
| g_free(soc_name); |
| object_property_set_str(OBJECT(&s->soc[i]), "cpu-type", |
| machine->cpu_type, &error_abort); |
| object_property_set_int(OBJECT(&s->soc[i]), "hartid-base", |
| base_hartid, &error_abort); |
| object_property_set_int(OBJECT(&s->soc[i]), "num-harts", |
| hart_count, &error_abort); |
| sysbus_realize(SYS_BUS_DEVICE(&s->soc[i]), &error_abort); |
| |
| if (!kvm_enabled()) { |
| /* Per-socket CLINT */ |
| riscv_aclint_swi_create( |
| memmap[VIRT_CLINT].base + i * memmap[VIRT_CLINT].size, |
| base_hartid, hart_count, false); |
| riscv_aclint_mtimer_create( |
| memmap[VIRT_CLINT].base + i * memmap[VIRT_CLINT].size + |
| RISCV_ACLINT_SWI_SIZE, |
| RISCV_ACLINT_DEFAULT_MTIMER_SIZE, base_hartid, hart_count, |
| RISCV_ACLINT_DEFAULT_MTIMECMP, RISCV_ACLINT_DEFAULT_MTIME, |
| RISCV_ACLINT_DEFAULT_TIMEBASE_FREQ, true); |
| |
| /* Per-socket ACLINT SSWI */ |
| if (s->have_aclint) { |
| riscv_aclint_swi_create( |
| memmap[VIRT_ACLINT_SSWI].base + |
| i * memmap[VIRT_ACLINT_SSWI].size, |
| base_hartid, hart_count, true); |
| } |
| } |
| |
| /* Per-socket interrupt controller */ |
| if (s->aia_type == VIRT_AIA_TYPE_NONE) { |
| s->irqchip[i] = virt_create_plic(memmap, i, |
| base_hartid, hart_count); |
| } else { |
| s->irqchip[i] = virt_create_aia(s->aia_type, memmap, i, |
| base_hartid, hart_count); |
| } |
| |
| /* Try to use different IRQCHIP instance based device type */ |
| if (i == 0) { |
| mmio_irqchip = s->irqchip[i]; |
| virtio_irqchip = s->irqchip[i]; |
| pcie_irqchip = s->irqchip[i]; |
| } |
| if (i == 1) { |
| virtio_irqchip = s->irqchip[i]; |
| pcie_irqchip = s->irqchip[i]; |
| } |
| if (i == 2) { |
| pcie_irqchip = s->irqchip[i]; |
| } |
| } |
| |
| if (riscv_is_32bit(&s->soc[0])) { |
| #if HOST_LONG_BITS == 64 |
| /* limit RAM size in a 32-bit system */ |
| if (machine->ram_size > 10 * GiB) { |
| machine->ram_size = 10 * GiB; |
| error_report("Limiting RAM size to 10 GiB"); |
| } |
| #endif |
| virt_high_pcie_memmap.base = VIRT32_HIGH_PCIE_MMIO_BASE; |
| virt_high_pcie_memmap.size = VIRT32_HIGH_PCIE_MMIO_SIZE; |
| } else { |
| virt_high_pcie_memmap.size = VIRT64_HIGH_PCIE_MMIO_SIZE; |
| virt_high_pcie_memmap.base = memmap[VIRT_DRAM].base + machine->ram_size; |
| virt_high_pcie_memmap.base = |
| ROUND_UP(virt_high_pcie_memmap.base, virt_high_pcie_memmap.size); |
| } |
| |
| /* register system main memory (actual RAM) */ |
| memory_region_add_subregion(system_memory, memmap[VIRT_DRAM].base, |
| machine->ram); |
| |
| /* create device tree */ |
| create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline, |
| riscv_is_32bit(&s->soc[0])); |
| |
| /* boot rom */ |
| memory_region_init_rom(mask_rom, NULL, "riscv_virt_board.mrom", |
| memmap[VIRT_MROM].size, &error_fatal); |
| memory_region_add_subregion(system_memory, memmap[VIRT_MROM].base, |
| mask_rom); |
| |
| /* |
| * Only direct boot kernel is currently supported for KVM VM, |
| * so the "-bios" parameter is ignored and treated like "-bios none" |
| * when KVM is enabled. |
| */ |
| if (kvm_enabled()) { |
| g_free(machine->firmware); |
| machine->firmware = g_strdup("none"); |
| } |
| |
| if (riscv_is_32bit(&s->soc[0])) { |
| firmware_end_addr = riscv_find_and_load_firmware(machine, |
| RISCV32_BIOS_BIN, start_addr, NULL); |
| } else { |
| firmware_end_addr = riscv_find_and_load_firmware(machine, |
| RISCV64_BIOS_BIN, start_addr, NULL); |
| } |
| |
| if (machine->kernel_filename) { |
| kernel_start_addr = riscv_calc_kernel_start_addr(&s->soc[0], |
| firmware_end_addr); |
| |
| kernel_entry = riscv_load_kernel(machine->kernel_filename, |
| kernel_start_addr, NULL); |
| |
| if (machine->initrd_filename) { |
| hwaddr start; |
| hwaddr end = riscv_load_initrd(machine->initrd_filename, |
| machine->ram_size, kernel_entry, |
| &start); |
| qemu_fdt_setprop_cell(machine->fdt, "/chosen", |
| "linux,initrd-start", start); |
| qemu_fdt_setprop_cell(machine->fdt, "/chosen", "linux,initrd-end", |
| end); |
| } |
| } else { |
| /* |
| * If dynamic firmware is used, it doesn't know where is the next mode |
| * if kernel argument is not set. |
| */ |
| kernel_entry = 0; |
| } |
| |
| if (drive_get(IF_PFLASH, 0, 0)) { |
| /* |
| * Pflash was supplied, let's overwrite the address we jump to after |
| * reset to the base of the flash. |
| */ |
| start_addr = virt_memmap[VIRT_FLASH].base; |
| } |
| |
| /* |
| * Init fw_cfg. Must be done before riscv_load_fdt, otherwise the device |
| * tree cannot be altered and we get FDT_ERR_NOSPACE. |
| */ |
| s->fw_cfg = create_fw_cfg(machine); |
| rom_set_fw(s->fw_cfg); |
| |
| /* Compute the fdt load address in dram */ |
| fdt_load_addr = riscv_load_fdt(memmap[VIRT_DRAM].base, |
| machine->ram_size, machine->fdt); |
| /* load the reset vector */ |
| riscv_setup_rom_reset_vec(machine, &s->soc[0], start_addr, |
| virt_memmap[VIRT_MROM].base, |
| virt_memmap[VIRT_MROM].size, kernel_entry, |
| fdt_load_addr, machine->fdt); |
| |
| /* |
| * Only direct boot kernel is currently supported for KVM VM, |
| * So here setup kernel start address and fdt address. |
| * TODO:Support firmware loading and integrate to TCG start |
| */ |
| if (kvm_enabled()) { |
| riscv_setup_direct_kernel(kernel_entry, fdt_load_addr); |
| } |
| |
| /* SiFive Test MMIO device */ |
| sifive_test_create(memmap[VIRT_TEST].base); |
| |
| /* VirtIO MMIO devices */ |
| for (i = 0; i < VIRTIO_COUNT; i++) { |
| sysbus_create_simple("virtio-mmio", |
| memmap[VIRT_VIRTIO].base + i * memmap[VIRT_VIRTIO].size, |
| qdev_get_gpio_in(DEVICE(virtio_irqchip), VIRTIO_IRQ + i)); |
| } |
| |
| gpex_pcie_init(system_memory, |
| memmap[VIRT_PCIE_ECAM].base, |
| memmap[VIRT_PCIE_ECAM].size, |
| memmap[VIRT_PCIE_MMIO].base, |
| memmap[VIRT_PCIE_MMIO].size, |
| virt_high_pcie_memmap.base, |
| virt_high_pcie_memmap.size, |
| memmap[VIRT_PCIE_PIO].base, |
| DEVICE(pcie_irqchip)); |
| |
| serial_mm_init(system_memory, memmap[VIRT_UART0].base, |
| 0, qdev_get_gpio_in(DEVICE(mmio_irqchip), UART0_IRQ), 399193, |
| serial_hd(0), DEVICE_LITTLE_ENDIAN); |
| |
| sysbus_create_simple("goldfish_rtc", memmap[VIRT_RTC].base, |
| qdev_get_gpio_in(DEVICE(mmio_irqchip), RTC_IRQ)); |
| |
| virt_flash_create(s); |
| |
| for (i = 0; i < ARRAY_SIZE(s->flash); i++) { |
| /* Map legacy -drive if=pflash to machine properties */ |
| pflash_cfi01_legacy_drive(s->flash[i], |
| drive_get(IF_PFLASH, 0, i)); |
| } |
| virt_flash_map(s, system_memory); |
| } |
| |
| static void virt_machine_instance_init(Object *obj) |
| { |
| } |
| |
| static char *virt_get_aia(Object *obj, Error **errp) |
| { |
| RISCVVirtState *s = RISCV_VIRT_MACHINE(obj); |
| const char *val; |
| |
| switch (s->aia_type) { |
| case VIRT_AIA_TYPE_APLIC: |
| val = "aplic"; |
| break; |
| default: |
| val = "none"; |
| break; |
| }; |
| |
| return g_strdup(val); |
| } |
| |
| static void virt_set_aia(Object *obj, const char *val, Error **errp) |
| { |
| RISCVVirtState *s = RISCV_VIRT_MACHINE(obj); |
| |
| if (!strcmp(val, "none")) { |
| s->aia_type = VIRT_AIA_TYPE_NONE; |
| } else if (!strcmp(val, "aplic")) { |
| s->aia_type = VIRT_AIA_TYPE_APLIC; |
| } else { |
| error_setg(errp, "Invalid AIA interrupt controller type"); |
| error_append_hint(errp, "Valid values are none, and aplic.\n"); |
| } |
| } |
| |
| static bool virt_get_aclint(Object *obj, Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| RISCVVirtState *s = RISCV_VIRT_MACHINE(ms); |
| |
| return s->have_aclint; |
| } |
| |
| static void virt_set_aclint(Object *obj, bool value, Error **errp) |
| { |
| MachineState *ms = MACHINE(obj); |
| RISCVVirtState *s = RISCV_VIRT_MACHINE(ms); |
| |
| s->have_aclint = value; |
| } |
| |
| static void virt_machine_class_init(ObjectClass *oc, void *data) |
| { |
| MachineClass *mc = MACHINE_CLASS(oc); |
| |
| mc->desc = "RISC-V VirtIO board"; |
| mc->init = virt_machine_init; |
| mc->max_cpus = VIRT_CPUS_MAX; |
| mc->default_cpu_type = TYPE_RISCV_CPU_BASE; |
| mc->pci_allow_0_address = true; |
| mc->possible_cpu_arch_ids = riscv_numa_possible_cpu_arch_ids; |
| mc->cpu_index_to_instance_props = riscv_numa_cpu_index_to_props; |
| mc->get_default_cpu_node_id = riscv_numa_get_default_cpu_node_id; |
| mc->numa_mem_supported = true; |
| mc->default_ram_id = "riscv_virt_board.ram"; |
| |
| machine_class_allow_dynamic_sysbus_dev(mc, TYPE_RAMFB_DEVICE); |
| |
| object_class_property_add_bool(oc, "aclint", virt_get_aclint, |
| virt_set_aclint); |
| object_class_property_set_description(oc, "aclint", |
| "Set on/off to enable/disable " |
| "emulating ACLINT devices"); |
| |
| object_class_property_add_str(oc, "aia", virt_get_aia, |
| virt_set_aia); |
| object_class_property_set_description(oc, "aia", |
| "Set type of AIA interrupt " |
| "conttoller. Valid values are " |
| "none, and aplic."); |
| } |
| |
| static const TypeInfo virt_machine_typeinfo = { |
| .name = MACHINE_TYPE_NAME("virt"), |
| .parent = TYPE_MACHINE, |
| .class_init = virt_machine_class_init, |
| .instance_init = virt_machine_instance_init, |
| .instance_size = sizeof(RISCVVirtState), |
| }; |
| |
| static void virt_machine_init_register_types(void) |
| { |
| type_register_static(&virt_machine_typeinfo); |
| } |
| |
| type_init(virt_machine_init_register_types) |