linux-headers: Update to v3.10-rc5
This adds symbols required for PPC64 pseries platform features:
1. sPAPR live migration;
2. in-kernel XICS interrupt controller.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
diff --git a/linux-headers/asm-mips/kvm.h b/linux-headers/asm-mips/kvm.h
new file mode 100644
index 0000000..3f424f5
--- /dev/null
+++ b/linux-headers/asm-mips/kvm.h
@@ -0,0 +1,138 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
+ * Copyright (C) 2013 Cavium, Inc.
+ * Authors: Sanjay Lal <sanjayl@kymasys.com>
+ */
+
+#ifndef __LINUX_KVM_MIPS_H
+#define __LINUX_KVM_MIPS_H
+
+#include <linux/types.h>
+
+/*
+ * KVM MIPS specific structures and definitions.
+ *
+ * Some parts derived from the x86 version of this file.
+ */
+
+/*
+ * for KVM_GET_REGS and KVM_SET_REGS
+ *
+ * If Config[AT] is zero (32-bit CPU), the register contents are
+ * stored in the lower 32-bits of the struct kvm_regs fields and sign
+ * extended to 64-bits.
+ */
+struct kvm_regs {
+ /* out (KVM_GET_REGS) / in (KVM_SET_REGS) */
+ __u64 gpr[32];
+ __u64 hi;
+ __u64 lo;
+ __u64 pc;
+};
+
+/*
+ * for KVM_GET_FPU and KVM_SET_FPU
+ *
+ * If Status[FR] is zero (32-bit FPU), the upper 32-bits of the FPRs
+ * are zero filled.
+ */
+struct kvm_fpu {
+ __u64 fpr[32];
+ __u32 fir;
+ __u32 fccr;
+ __u32 fexr;
+ __u32 fenr;
+ __u32 fcsr;
+ __u32 pad;
+};
+
+
+/*
+ * For MIPS, we use KVM_SET_ONE_REG and KVM_GET_ONE_REG to access CP0
+ * registers. The id field is broken down as follows:
+ *
+ * bits[2..0] - Register 'sel' index.
+ * bits[7..3] - Register 'rd' index.
+ * bits[15..8] - Must be zero.
+ * bits[63..16] - 1 -> CP0 registers.
+ *
+ * Other sets registers may be added in the future. Each set would
+ * have its own identifier in bits[63..16].
+ *
+ * The addr field of struct kvm_one_reg must point to an aligned
+ * 64-bit wide location. For registers that are narrower than
+ * 64-bits, the value is stored in the low order bits of the location,
+ * and sign extended to 64-bits.
+ *
+ * The registers defined in struct kvm_regs are also accessible, the
+ * id values for these are below.
+ */
+
+#define KVM_REG_MIPS_R0 0
+#define KVM_REG_MIPS_R1 1
+#define KVM_REG_MIPS_R2 2
+#define KVM_REG_MIPS_R3 3
+#define KVM_REG_MIPS_R4 4
+#define KVM_REG_MIPS_R5 5
+#define KVM_REG_MIPS_R6 6
+#define KVM_REG_MIPS_R7 7
+#define KVM_REG_MIPS_R8 8
+#define KVM_REG_MIPS_R9 9
+#define KVM_REG_MIPS_R10 10
+#define KVM_REG_MIPS_R11 11
+#define KVM_REG_MIPS_R12 12
+#define KVM_REG_MIPS_R13 13
+#define KVM_REG_MIPS_R14 14
+#define KVM_REG_MIPS_R15 15
+#define KVM_REG_MIPS_R16 16
+#define KVM_REG_MIPS_R17 17
+#define KVM_REG_MIPS_R18 18
+#define KVM_REG_MIPS_R19 19
+#define KVM_REG_MIPS_R20 20
+#define KVM_REG_MIPS_R21 21
+#define KVM_REG_MIPS_R22 22
+#define KVM_REG_MIPS_R23 23
+#define KVM_REG_MIPS_R24 24
+#define KVM_REG_MIPS_R25 25
+#define KVM_REG_MIPS_R26 26
+#define KVM_REG_MIPS_R27 27
+#define KVM_REG_MIPS_R28 28
+#define KVM_REG_MIPS_R29 29
+#define KVM_REG_MIPS_R30 30
+#define KVM_REG_MIPS_R31 31
+
+#define KVM_REG_MIPS_HI 32
+#define KVM_REG_MIPS_LO 33
+#define KVM_REG_MIPS_PC 34
+
+/*
+ * KVM MIPS specific structures and definitions
+ *
+ */
+struct kvm_debug_exit_arch {
+ __u64 epc;
+};
+
+/* for KVM_SET_GUEST_DEBUG */
+struct kvm_guest_debug_arch {
+};
+
+/* definition of registers in kvm_run */
+struct kvm_sync_regs {
+};
+
+/* dummy definition */
+struct kvm_sregs {
+};
+
+struct kvm_mips_interrupt {
+ /* in */
+ __u32 cpu;
+ __u32 irq;
+};
+
+#endif /* __LINUX_KVM_MIPS_H */
