| /* |
| * SMSC LAN9118 Ethernet interface emulation |
| * |
| * Copyright (c) 2009 CodeSourcery, LLC. |
| * Written by Paul Brook |
| * |
| * This code is licensed under the GNU GPL v2 |
| * |
| * Contributions after 2012-01-13 are licensed under the terms of the |
| * GNU GPL, version 2 or (at your option) any later version. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "hw/sysbus.h" |
| #include "migration/vmstate.h" |
| #include "net/net.h" |
| #include "net/eth.h" |
| #include "hw/irq.h" |
| #include "hw/net/lan9118.h" |
| #include "hw/ptimer.h" |
| #include "hw/qdev-properties.h" |
| #include "qapi/error.h" |
| #include "qemu/log.h" |
| #include "qemu/module.h" |
| /* For crc32 */ |
| #include <zlib.h> |
| #include "qom/object.h" |
| |
| //#define DEBUG_LAN9118 |
| |
| #ifdef DEBUG_LAN9118 |
| #define DPRINTF(fmt, ...) \ |
| do { printf("lan9118: " fmt , ## __VA_ARGS__); } while (0) |
| #else |
| #define DPRINTF(fmt, ...) do {} while(0) |
| #endif |
| |
| /* The tx and rx fifo ports are a range of aliased 32-bit registers */ |
| #define RX_DATA_FIFO_PORT_FIRST 0x00 |
| #define RX_DATA_FIFO_PORT_LAST 0x1f |
| #define TX_DATA_FIFO_PORT_FIRST 0x20 |
| #define TX_DATA_FIFO_PORT_LAST 0x3f |
| |
| #define RX_STATUS_FIFO_PORT 0x40 |
| #define RX_STATUS_FIFO_PEEK 0x44 |
| #define TX_STATUS_FIFO_PORT 0x48 |
| #define TX_STATUS_FIFO_PEEK 0x4c |
| |
| #define CSR_ID_REV 0x50 |
| #define CSR_IRQ_CFG 0x54 |
| #define CSR_INT_STS 0x58 |
| #define CSR_INT_EN 0x5c |
| #define CSR_BYTE_TEST 0x64 |
| #define CSR_FIFO_INT 0x68 |
| #define CSR_RX_CFG 0x6c |
| #define CSR_TX_CFG 0x70 |
| #define CSR_HW_CFG 0x74 |
| #define CSR_RX_DP_CTRL 0x78 |
| #define CSR_RX_FIFO_INF 0x7c |
| #define CSR_TX_FIFO_INF 0x80 |
| #define CSR_PMT_CTRL 0x84 |
| #define CSR_GPIO_CFG 0x88 |
| #define CSR_GPT_CFG 0x8c |
| #define CSR_GPT_CNT 0x90 |
| #define CSR_WORD_SWAP 0x98 |
| #define CSR_FREE_RUN 0x9c |
| #define CSR_RX_DROP 0xa0 |
| #define CSR_MAC_CSR_CMD 0xa4 |
| #define CSR_MAC_CSR_DATA 0xa8 |
| #define CSR_AFC_CFG 0xac |
| #define CSR_E2P_CMD 0xb0 |
| #define CSR_E2P_DATA 0xb4 |
| |
| #define E2P_CMD_MAC_ADDR_LOADED 0x100 |
| |
| /* IRQ_CFG */ |
| #define IRQ_INT 0x00001000 |
| #define IRQ_EN 0x00000100 |
| #define IRQ_POL 0x00000010 |
| #define IRQ_TYPE 0x00000001 |
| |
| /* INT_STS/INT_EN */ |
| #define SW_INT 0x80000000 |
| #define TXSTOP_INT 0x02000000 |
| #define RXSTOP_INT 0x01000000 |
| #define RXDFH_INT 0x00800000 |
| #define TX_IOC_INT 0x00200000 |
| #define RXD_INT 0x00100000 |
| #define GPT_INT 0x00080000 |
| #define PHY_INT 0x00040000 |
| #define PME_INT 0x00020000 |
| #define TXSO_INT 0x00010000 |
| #define RWT_INT 0x00008000 |
| #define RXE_INT 0x00004000 |
| #define TXE_INT 0x00002000 |
| #define TDFU_INT 0x00000800 |
| #define TDFO_INT 0x00000400 |
| #define TDFA_INT 0x00000200 |
| #define TSFF_INT 0x00000100 |
| #define TSFL_INT 0x00000080 |
| #define RXDF_INT 0x00000040 |
| #define RDFL_INT 0x00000020 |
| #define RSFF_INT 0x00000010 |
| #define RSFL_INT 0x00000008 |
| #define GPIO2_INT 0x00000004 |
| #define GPIO1_INT 0x00000002 |
| #define GPIO0_INT 0x00000001 |
| #define RESERVED_INT 0x7c001000 |
| |
| #define MAC_CR 1 |
| #define MAC_ADDRH 2 |
| #define MAC_ADDRL 3 |
| #define MAC_HASHH 4 |
| #define MAC_HASHL 5 |
| #define MAC_MII_ACC 6 |
| #define MAC_MII_DATA 7 |
| #define MAC_FLOW 8 |
| #define MAC_VLAN1 9 /* TODO */ |
| #define MAC_VLAN2 10 /* TODO */ |
| #define MAC_WUFF 11 /* TODO */ |
| #define MAC_WUCSR 12 /* TODO */ |
| |
| #define MAC_CR_RXALL 0x80000000 |
| #define MAC_CR_RCVOWN 0x00800000 |
| #define MAC_CR_LOOPBK 0x00200000 |
| #define MAC_CR_FDPX 0x00100000 |
| #define MAC_CR_MCPAS 0x00080000 |
| #define MAC_CR_PRMS 0x00040000 |
| #define MAC_CR_INVFILT 0x00020000 |
| #define MAC_CR_PASSBAD 0x00010000 |
| #define MAC_CR_HO 0x00008000 |
| #define MAC_CR_HPFILT 0x00002000 |
| #define MAC_CR_LCOLL 0x00001000 |
| #define MAC_CR_BCAST 0x00000800 |
| #define MAC_CR_DISRTY 0x00000400 |
| #define MAC_CR_PADSTR 0x00000100 |
| #define MAC_CR_BOLMT 0x000000c0 |
| #define MAC_CR_DFCHK 0x00000020 |
| #define MAC_CR_TXEN 0x00000008 |
| #define MAC_CR_RXEN 0x00000004 |
| #define MAC_CR_RESERVED 0x7f404213 |
| |
| #define PHY_INT_ENERGYON 0x80 |
| #define PHY_INT_AUTONEG_COMPLETE 0x40 |
| #define PHY_INT_FAULT 0x20 |
| #define PHY_INT_DOWN 0x10 |
| #define PHY_INT_AUTONEG_LP 0x08 |
| #define PHY_INT_PARFAULT 0x04 |
| #define PHY_INT_AUTONEG_PAGE 0x02 |
| |
| #define GPT_TIMER_EN 0x20000000 |
| |
| enum tx_state { |
| TX_IDLE, |
| TX_B, |
| TX_DATA |
| }; |
| |
| typedef struct { |
| /* state is a tx_state but we can't put enums in VMStateDescriptions. */ |
| uint32_t state; |
| uint32_t cmd_a; |
| uint32_t cmd_b; |
| int32_t buffer_size; |
| int32_t offset; |
| int32_t pad; |
| int32_t fifo_used; |
| int32_t len; |
| uint8_t data[2048]; |
| } LAN9118Packet; |
| |
| static const VMStateDescription vmstate_lan9118_packet = { |
| .name = "lan9118_packet", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT32(state, LAN9118Packet), |
| VMSTATE_UINT32(cmd_a, LAN9118Packet), |
| VMSTATE_UINT32(cmd_b, LAN9118Packet), |
| VMSTATE_INT32(buffer_size, LAN9118Packet), |
| VMSTATE_INT32(offset, LAN9118Packet), |
| VMSTATE_INT32(pad, LAN9118Packet), |
| VMSTATE_INT32(fifo_used, LAN9118Packet), |
| VMSTATE_INT32(len, LAN9118Packet), |
| VMSTATE_UINT8_ARRAY(data, LAN9118Packet, 2048), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| OBJECT_DECLARE_SIMPLE_TYPE(lan9118_state, LAN9118) |
| |
| struct lan9118_state { |
| SysBusDevice parent_obj; |
| |
| NICState *nic; |
| NICConf conf; |
| qemu_irq irq; |
| MemoryRegion mmio; |
| ptimer_state *timer; |
| |
| uint32_t irq_cfg; |
| uint32_t int_sts; |
| uint32_t int_en; |
| uint32_t fifo_int; |
| uint32_t rx_cfg; |
| uint32_t tx_cfg; |
| uint32_t hw_cfg; |
| uint32_t pmt_ctrl; |
| uint32_t gpio_cfg; |
| uint32_t gpt_cfg; |
| uint32_t word_swap; |
| uint32_t free_timer_start; |
| uint32_t mac_cmd; |
| uint32_t mac_data; |
| uint32_t afc_cfg; |
| uint32_t e2p_cmd; |
| uint32_t e2p_data; |
| |
| uint32_t mac_cr; |
| uint32_t mac_hashh; |
| uint32_t mac_hashl; |
| uint32_t mac_mii_acc; |
| uint32_t mac_mii_data; |
| uint32_t mac_flow; |
| |
| uint32_t phy_status; |
| uint32_t phy_control; |
| uint32_t phy_advertise; |
| uint32_t phy_int; |
| uint32_t phy_int_mask; |
| |
| int32_t eeprom_writable; |
| uint8_t eeprom[128]; |
| |
| int32_t tx_fifo_size; |
| LAN9118Packet *txp; |
| LAN9118Packet tx_packet; |
| |
| int32_t tx_status_fifo_used; |
| int32_t tx_status_fifo_head; |
| uint32_t tx_status_fifo[512]; |
| |
| int32_t rx_status_fifo_size; |
| int32_t rx_status_fifo_used; |
| int32_t rx_status_fifo_head; |
| uint32_t rx_status_fifo[896]; |
| int32_t rx_fifo_size; |
| int32_t rx_fifo_used; |
| int32_t rx_fifo_head; |
| uint32_t rx_fifo[3360]; |
| int32_t rx_packet_size_head; |
| int32_t rx_packet_size_tail; |
| int32_t rx_packet_size[1024]; |
| |
| int32_t rxp_offset; |
| int32_t rxp_size; |
| int32_t rxp_pad; |
| |
| uint32_t write_word_prev_offset; |
| uint32_t write_word_n; |
| uint16_t write_word_l; |
| uint16_t write_word_h; |
| uint32_t read_word_prev_offset; |
| uint32_t read_word_n; |
| uint32_t read_long; |
| |
| uint32_t mode_16bit; |
| }; |
| |
| static const VMStateDescription vmstate_lan9118 = { |
| .name = "lan9118", |
| .version_id = 2, |
| .minimum_version_id = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_PTIMER(timer, lan9118_state), |
| VMSTATE_UINT32(irq_cfg, lan9118_state), |
| VMSTATE_UINT32(int_sts, lan9118_state), |
| VMSTATE_UINT32(int_en, lan9118_state), |
| VMSTATE_UINT32(fifo_int, lan9118_state), |
| VMSTATE_UINT32(rx_cfg, lan9118_state), |
| VMSTATE_UINT32(tx_cfg, lan9118_state), |
| VMSTATE_UINT32(hw_cfg, lan9118_state), |
| VMSTATE_UINT32(pmt_ctrl, lan9118_state), |
| VMSTATE_UINT32(gpio_cfg, lan9118_state), |
| VMSTATE_UINT32(gpt_cfg, lan9118_state), |
| VMSTATE_UINT32(word_swap, lan9118_state), |
| VMSTATE_UINT32(free_timer_start, lan9118_state), |
| VMSTATE_UINT32(mac_cmd, lan9118_state), |
| VMSTATE_UINT32(mac_data, lan9118_state), |
| VMSTATE_UINT32(afc_cfg, lan9118_state), |
| VMSTATE_UINT32(e2p_cmd, lan9118_state), |
| VMSTATE_UINT32(e2p_data, lan9118_state), |
| VMSTATE_UINT32(mac_cr, lan9118_state), |
| VMSTATE_UINT32(mac_hashh, lan9118_state), |
| VMSTATE_UINT32(mac_hashl, lan9118_state), |
| VMSTATE_UINT32(mac_mii_acc, lan9118_state), |
| VMSTATE_UINT32(mac_mii_data, lan9118_state), |
| VMSTATE_UINT32(mac_flow, lan9118_state), |
| VMSTATE_UINT32(phy_status, lan9118_state), |
| VMSTATE_UINT32(phy_control, lan9118_state), |
| VMSTATE_UINT32(phy_advertise, lan9118_state), |
| VMSTATE_UINT32(phy_int, lan9118_state), |
| VMSTATE_UINT32(phy_int_mask, lan9118_state), |
| VMSTATE_INT32(eeprom_writable, lan9118_state), |
| VMSTATE_UINT8_ARRAY(eeprom, lan9118_state, 128), |
| VMSTATE_INT32(tx_fifo_size, lan9118_state), |
| /* txp always points at tx_packet so need not be saved */ |
| VMSTATE_STRUCT(tx_packet, lan9118_state, 0, |
| vmstate_lan9118_packet, LAN9118Packet), |
| VMSTATE_INT32(tx_status_fifo_used, lan9118_state), |
| VMSTATE_INT32(tx_status_fifo_head, lan9118_state), |
| VMSTATE_UINT32_ARRAY(tx_status_fifo, lan9118_state, 512), |
| VMSTATE_INT32(rx_status_fifo_size, lan9118_state), |
| VMSTATE_INT32(rx_status_fifo_used, lan9118_state), |
| VMSTATE_INT32(rx_status_fifo_head, lan9118_state), |
| VMSTATE_UINT32_ARRAY(rx_status_fifo, lan9118_state, 896), |
| VMSTATE_INT32(rx_fifo_size, lan9118_state), |
| VMSTATE_INT32(rx_fifo_used, lan9118_state), |
| VMSTATE_INT32(rx_fifo_head, lan9118_state), |
| VMSTATE_UINT32_ARRAY(rx_fifo, lan9118_state, 3360), |
| VMSTATE_INT32(rx_packet_size_head, lan9118_state), |
| VMSTATE_INT32(rx_packet_size_tail, lan9118_state), |
| VMSTATE_INT32_ARRAY(rx_packet_size, lan9118_state, 1024), |
| VMSTATE_INT32(rxp_offset, lan9118_state), |
| VMSTATE_INT32(rxp_size, lan9118_state), |
| VMSTATE_INT32(rxp_pad, lan9118_state), |
| VMSTATE_UINT32_V(write_word_prev_offset, lan9118_state, 2), |
| VMSTATE_UINT32_V(write_word_n, lan9118_state, 2), |
| VMSTATE_UINT16_V(write_word_l, lan9118_state, 2), |
| VMSTATE_UINT16_V(write_word_h, lan9118_state, 2), |
| VMSTATE_UINT32_V(read_word_prev_offset, lan9118_state, 2), |
| VMSTATE_UINT32_V(read_word_n, lan9118_state, 2), |
| VMSTATE_UINT32_V(read_long, lan9118_state, 2), |
| VMSTATE_UINT32_V(mode_16bit, lan9118_state, 2), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static void lan9118_update(lan9118_state *s) |
| { |
| int level; |
| |
| /* TODO: Implement FIFO level IRQs. */ |
| level = (s->int_sts & s->int_en) != 0; |
| if (level) { |
| s->irq_cfg |= IRQ_INT; |
| } else { |
| s->irq_cfg &= ~IRQ_INT; |
| } |
| if ((s->irq_cfg & IRQ_EN) == 0) { |
| level = 0; |
| } |
| if ((s->irq_cfg & (IRQ_TYPE | IRQ_POL)) != (IRQ_TYPE | IRQ_POL)) { |
| /* Interrupt is active low unless we're configured as |
| * active-high polarity, push-pull type. |
| */ |
| level = !level; |
| } |
| qemu_set_irq(s->irq, level); |
| } |
| |
| static void lan9118_mac_changed(lan9118_state *s) |
| { |
| qemu_format_nic_info_str(qemu_get_queue(s->nic), s->conf.macaddr.a); |
| } |
| |
| static void lan9118_reload_eeprom(lan9118_state *s) |
| { |
| int i; |
| if (s->eeprom[0] != 0xa5) { |
| s->e2p_cmd &= ~E2P_CMD_MAC_ADDR_LOADED; |
| DPRINTF("MACADDR load failed\n"); |
| return; |
| } |
| for (i = 0; i < 6; i++) { |
| s->conf.macaddr.a[i] = s->eeprom[i + 1]; |
| } |
| s->e2p_cmd |= E2P_CMD_MAC_ADDR_LOADED; |
| DPRINTF("MACADDR loaded from eeprom\n"); |
| lan9118_mac_changed(s); |
| } |
| |
| static void phy_update_irq(lan9118_state *s) |
| { |
| if (s->phy_int & s->phy_int_mask) { |
| s->int_sts |= PHY_INT; |
| } else { |
| s->int_sts &= ~PHY_INT; |
| } |
| lan9118_update(s); |
| } |
| |
| static void phy_update_link(lan9118_state *s) |
| { |
| /* Autonegotiation status mirrors link status. */ |
| if (qemu_get_queue(s->nic)->link_down) { |
| s->phy_status &= ~0x0024; |
| s->phy_int |= PHY_INT_DOWN; |
| } else { |
| s->phy_status |= 0x0024; |
| s->phy_int |= PHY_INT_ENERGYON; |
| s->phy_int |= PHY_INT_AUTONEG_COMPLETE; |
| } |
| phy_update_irq(s); |
| } |
| |
| static void lan9118_set_link(NetClientState *nc) |
| { |
| phy_update_link(qemu_get_nic_opaque(nc)); |
| } |
| |
| static void phy_reset(lan9118_state *s) |
| { |
| s->phy_status = 0x7809; |
| s->phy_control = 0x3000; |
| s->phy_advertise = 0x01e1; |
| s->phy_int_mask = 0; |
| s->phy_int = 0; |
| phy_update_link(s); |
| } |
| |
| static void lan9118_reset(DeviceState *d) |
| { |
| lan9118_state *s = LAN9118(d); |
| |
| s->irq_cfg &= (IRQ_TYPE | IRQ_POL); |
| s->int_sts = 0; |
| s->int_en = 0; |
| s->fifo_int = 0x48000000; |
| s->rx_cfg = 0; |
| s->tx_cfg = 0; |
| s->hw_cfg = s->mode_16bit ? 0x00050000 : 0x00050004; |
| s->pmt_ctrl &= 0x45; |
| s->gpio_cfg = 0; |
| s->txp->fifo_used = 0; |
| s->txp->state = TX_IDLE; |
| s->txp->cmd_a = 0xffffffffu; |
| s->txp->cmd_b = 0xffffffffu; |
| s->txp->len = 0; |
| s->txp->fifo_used = 0; |
| s->tx_fifo_size = 4608; |
| s->tx_status_fifo_used = 0; |
| s->rx_status_fifo_size = 704; |
| s->rx_fifo_size = 2640; |
| s->rx_fifo_used = 0; |
| s->rx_status_fifo_size = 176; |
| s->rx_status_fifo_used = 0; |
| s->rxp_offset = 0; |
| s->rxp_size = 0; |
| s->rxp_pad = 0; |
| s->rx_packet_size_tail = s->rx_packet_size_head; |
| s->rx_packet_size[s->rx_packet_size_head] = 0; |
| s->mac_cmd = 0; |
| s->mac_data = 0; |
| s->afc_cfg = 0; |
| s->e2p_cmd = 0; |
| s->e2p_data = 0; |
| s->free_timer_start = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) / 40; |
| |
| ptimer_transaction_begin(s->timer); |
| ptimer_stop(s->timer); |
| ptimer_set_count(s->timer, 0xffff); |
| ptimer_transaction_commit(s->timer); |
| s->gpt_cfg = 0xffff; |
| |
| s->mac_cr = MAC_CR_PRMS; |
| s->mac_hashh = 0; |
| s->mac_hashl = 0; |
| s->mac_mii_acc = 0; |
| s->mac_mii_data = 0; |
| s->mac_flow = 0; |
| |
| s->read_word_n = 0; |
| s->write_word_n = 0; |
| |
| phy_reset(s); |
| |
| s->eeprom_writable = 0; |
| lan9118_reload_eeprom(s); |
| } |
| |
| static void rx_fifo_push(lan9118_state *s, uint32_t val) |
| { |
| int fifo_pos; |
| fifo_pos = s->rx_fifo_head + s->rx_fifo_used; |
| if (fifo_pos >= s->rx_fifo_size) |
| fifo_pos -= s->rx_fifo_size; |
| s->rx_fifo[fifo_pos] = val; |
| s->rx_fifo_used++; |
| } |
| |
| /* Return nonzero if the packet is accepted by the filter. */ |
| static int lan9118_filter(lan9118_state *s, const uint8_t *addr) |
| { |
| int multicast; |
| uint32_t hash; |
| |
| if (s->mac_cr & MAC_CR_PRMS) { |
| return 1; |
| } |
| if (addr[0] == 0xff && addr[1] == 0xff && addr[2] == 0xff && |
| addr[3] == 0xff && addr[4] == 0xff && addr[5] == 0xff) { |
| return (s->mac_cr & MAC_CR_BCAST) == 0; |
| } |
| |
| multicast = addr[0] & 1; |
| if (multicast &&s->mac_cr & MAC_CR_MCPAS) { |
| return 1; |
| } |
| if (multicast ? (s->mac_cr & MAC_CR_HPFILT) == 0 |
| : (s->mac_cr & MAC_CR_HO) == 0) { |
| /* Exact matching. */ |
| hash = memcmp(addr, s->conf.macaddr.a, 6); |
| if (s->mac_cr & MAC_CR_INVFILT) { |
| return hash != 0; |
| } else { |
| return hash == 0; |
| } |
| } else { |
| /* Hash matching */ |
| hash = net_crc32(addr, ETH_ALEN) >> 26; |
| if (hash & 0x20) { |
| return (s->mac_hashh >> (hash & 0x1f)) & 1; |
| } else { |
| return (s->mac_hashl >> (hash & 0x1f)) & 1; |
| } |
| } |
| } |
| |
| static ssize_t lan9118_receive(NetClientState *nc, const uint8_t *buf, |
| size_t size) |
| { |
| lan9118_state *s = qemu_get_nic_opaque(nc); |
| int fifo_len; |
| int offset; |
| int src_pos; |
| int n; |
| int filter; |
| uint32_t val; |
| uint32_t crc; |
| uint32_t status; |
| |
| if ((s->mac_cr & MAC_CR_RXEN) == 0) { |
| return -1; |
| } |
| |
| if (size >= 2048 || size < 14) { |
| return -1; |
| } |
| |
| /* TODO: Implement FIFO overflow notification. */ |
| if (s->rx_status_fifo_used == s->rx_status_fifo_size) { |
| return -1; |
| } |
| |
| filter = lan9118_filter(s, buf); |
| if (!filter && (s->mac_cr & MAC_CR_RXALL) == 0) { |
| return size; |
| } |
| |
| offset = (s->rx_cfg >> 8) & 0x1f; |
| n = offset & 3; |
| fifo_len = (size + n + 3) >> 2; |
| /* Add a word for the CRC. */ |
| fifo_len++; |
| if (s->rx_fifo_size - s->rx_fifo_used < fifo_len) { |
| return -1; |
| } |
| |
| DPRINTF("Got packet len:%d fifo:%d filter:%s\n", |
| (int)size, fifo_len, filter ? "pass" : "fail"); |
| val = 0; |
| crc = bswap32(crc32(~0, buf, size)); |
| for (src_pos = 0; src_pos < size; src_pos++) { |
| val = (val >> 8) | ((uint32_t)buf[src_pos] << 24); |
| n++; |
| if (n == 4) { |
| n = 0; |
| rx_fifo_push(s, val); |
| val = 0; |
| } |
| } |
| if (n) { |
| val >>= ((4 - n) * 8); |
| val |= crc << (n * 8); |
| rx_fifo_push(s, val); |
| val = crc >> ((4 - n) * 8); |
| rx_fifo_push(s, val); |
| } else { |
| rx_fifo_push(s, crc); |
| } |
| n = s->rx_status_fifo_head + s->rx_status_fifo_used; |
| if (n >= s->rx_status_fifo_size) { |
| n -= s->rx_status_fifo_size; |
| } |
| s->rx_packet_size[s->rx_packet_size_tail] = fifo_len; |
| s->rx_packet_size_tail = (s->rx_packet_size_tail + 1023) & 1023; |
| s->rx_status_fifo_used++; |
| |
| status = (size + 4) << 16; |
| if (buf[0] == 0xff && buf[1] == 0xff && buf[2] == 0xff && |
| buf[3] == 0xff && buf[4] == 0xff && buf[5] == 0xff) { |
| status |= 0x00002000; |
| } else if (buf[0] & 1) { |
| status |= 0x00000400; |
| } |
| if (!filter) { |
| status |= 0x40000000; |
| } |
| s->rx_status_fifo[n] = status; |
| |
| if (s->rx_status_fifo_used > (s->fifo_int & 0xff)) { |
| s->int_sts |= RSFL_INT; |
| } |
| lan9118_update(s); |
| |
| return size; |
| } |
| |
| static uint32_t rx_fifo_pop(lan9118_state *s) |
| { |
| int n; |
| uint32_t val; |
| |
| if (s->rxp_size == 0 && s->rxp_pad == 0) { |
| s->rxp_size = s->rx_packet_size[s->rx_packet_size_head]; |
| s->rx_packet_size[s->rx_packet_size_head] = 0; |
| if (s->rxp_size != 0) { |
| s->rx_packet_size_head = (s->rx_packet_size_head + 1023) & 1023; |
| s->rxp_offset = (s->rx_cfg >> 10) & 7; |
| n = s->rxp_offset + s->rxp_size; |
| switch (s->rx_cfg >> 30) { |
| case 1: |
| n = (-n) & 3; |
| break; |
| case 2: |
| n = (-n) & 7; |
| break; |
| default: |
| n = 0; |
| break; |
| } |
| s->rxp_pad = n; |
| DPRINTF("Pop packet size:%d offset:%d pad: %d\n", |
| s->rxp_size, s->rxp_offset, s->rxp_pad); |
| } |
| } |
| if (s->rxp_offset > 0) { |
| s->rxp_offset--; |
| val = 0; |
| } else if (s->rxp_size > 0) { |
| s->rxp_size--; |
| val = s->rx_fifo[s->rx_fifo_head++]; |
| if (s->rx_fifo_head >= s->rx_fifo_size) { |
| s->rx_fifo_head -= s->rx_fifo_size; |
| } |
| s->rx_fifo_used--; |
| } else if (s->rxp_pad > 0) { |
| s->rxp_pad--; |
| val = 0; |
| } else { |
| DPRINTF("RX underflow\n"); |
| s->int_sts |= RXE_INT; |
| val = 0; |
| } |
| lan9118_update(s); |
| return val; |
| } |
| |
| static void do_tx_packet(lan9118_state *s) |
| { |
| int n; |
| uint32_t status; |
| |
| /* FIXME: Honor TX disable, and allow queueing of packets. */ |
| if (s->phy_control & 0x4000) { |
| /* This assumes the receive routine doesn't touch the VLANClient. */ |
| qemu_receive_packet(qemu_get_queue(s->nic), s->txp->data, s->txp->len); |
| } else { |
| qemu_send_packet(qemu_get_queue(s->nic), s->txp->data, s->txp->len); |
| } |
| s->txp->fifo_used = 0; |
| |
| if (s->tx_status_fifo_used == 512) { |
| /* Status FIFO full */ |
| return; |
| } |
| /* Add entry to status FIFO. */ |
| status = s->txp->cmd_b & 0xffff0000u; |
| DPRINTF("Sent packet tag:%04x len %d\n", status >> 16, s->txp->len); |
| n = (s->tx_status_fifo_head + s->tx_status_fifo_used) & 511; |
| s->tx_status_fifo[n] = status; |
| s->tx_status_fifo_used++; |
| |
| /* |
| * Generate TSFL interrupt if TX FIFO level exceeds the level |
| * specified in the FIFO_INT TX Status Level field. |
| */ |
| if (s->tx_status_fifo_used > ((s->fifo_int >> 16) & 0xff)) { |
| s->int_sts |= TSFL_INT; |
| } |
| if (s->tx_status_fifo_used == 512) { |
| s->int_sts |= TSFF_INT; |
| /* TODO: Stop transmission. */ |
| } |
| } |
| |
| static uint32_t rx_status_fifo_pop(lan9118_state *s) |
| { |
| uint32_t val; |
| |
| val = s->rx_status_fifo[s->rx_status_fifo_head]; |
| if (s->rx_status_fifo_used != 0) { |
| s->rx_status_fifo_used--; |
| s->rx_status_fifo_head++; |
| if (s->rx_status_fifo_head >= s->rx_status_fifo_size) { |
| s->rx_status_fifo_head -= s->rx_status_fifo_size; |
| } |
| /* ??? What value should be returned when the FIFO is empty? */ |
| DPRINTF("RX status pop 0x%08x\n", val); |
| } |
| return val; |
| } |
| |
| static uint32_t tx_status_fifo_pop(lan9118_state *s) |
| { |
| uint32_t val; |
| |
| val = s->tx_status_fifo[s->tx_status_fifo_head]; |
| if (s->tx_status_fifo_used != 0) { |
| s->tx_status_fifo_used--; |
| s->tx_status_fifo_head = (s->tx_status_fifo_head + 1) & 511; |
| /* ??? What value should be returned when the FIFO is empty? */ |
| } |
| return val; |
| } |
| |
| static void tx_fifo_push(lan9118_state *s, uint32_t val) |
| { |
| int n; |
| |
| if (s->txp->fifo_used == s->tx_fifo_size) { |
| s->int_sts |= TDFO_INT; |
| return; |
| } |
| switch (s->txp->state) { |
| case TX_IDLE: |
| s->txp->cmd_a = val & 0x831f37ff; |
| s->txp->fifo_used++; |
| s->txp->state = TX_B; |
| s->txp->buffer_size = extract32(s->txp->cmd_a, 0, 11); |
| s->txp->offset = extract32(s->txp->cmd_a, 16, 5); |
| break; |
| case TX_B: |
| if (s->txp->cmd_a & 0x2000) { |
| /* First segment */ |
| s->txp->cmd_b = val; |
| s->txp->fifo_used++; |
| /* End alignment does not include command words. */ |
| n = (s->txp->buffer_size + s->txp->offset + 3) >> 2; |
| switch ((n >> 24) & 3) { |
| case 1: |
| n = (-n) & 3; |
| break; |
| case 2: |
| n = (-n) & 7; |
| break; |
| default: |
| n = 0; |
| } |
| s->txp->pad = n; |
| s->txp->len = 0; |
| } |
| DPRINTF("Block len:%d offset:%d pad:%d cmd %08x\n", |
| s->txp->buffer_size, s->txp->offset, s->txp->pad, |
| s->txp->cmd_a); |
| s->txp->state = TX_DATA; |
| break; |
| case TX_DATA: |
| if (s->txp->offset >= 4) { |
| s->txp->offset -= 4; |
| break; |
| } |
| if (s->txp->buffer_size <= 0 && s->txp->pad != 0) { |
| s->txp->pad--; |
| } else { |
| n = MIN(4, s->txp->buffer_size + s->txp->offset); |
| while (s->txp->offset) { |
| val >>= 8; |
| n--; |
| s->txp->offset--; |
| } |
| /* Documentation is somewhat unclear on the ordering of bytes |
| in FIFO words. Empirical results show it to be little-endian. |
| */ |
| /* TODO: FIFO overflow checking. */ |
| while (n--) { |
| s->txp->data[s->txp->len] = val & 0xff; |
| s->txp->len++; |
| val >>= 8; |
| s->txp->buffer_size--; |
| } |
| s->txp->fifo_used++; |
| } |
| if (s->txp->buffer_size <= 0 && s->txp->pad == 0) { |
| if (s->txp->cmd_a & 0x1000) { |
| do_tx_packet(s); |
| } |
| if (s->txp->cmd_a & 0x80000000) { |
| s->int_sts |= TX_IOC_INT; |
| } |
| s->txp->state = TX_IDLE; |
| } |
| break; |
| } |
| } |
| |
| static uint32_t do_phy_read(lan9118_state *s, int reg) |
| { |
| uint32_t val; |
| |
| switch (reg) { |
| case 0: /* Basic Control */ |
| return s->phy_control; |
| case 1: /* Basic Status */ |
| return s->phy_status; |
| case 2: /* ID1 */ |
| return 0x0007; |
| case 3: /* ID2 */ |
| return 0xc0d1; |
| case 4: /* Auto-neg advertisement */ |
| return s->phy_advertise; |
| case 5: /* Auto-neg Link Partner Ability */ |
| return 0x0f71; |
| case 6: /* Auto-neg Expansion */ |
| return 1; |
| /* TODO 17, 18, 27, 29, 30, 31 */ |
| case 29: /* Interrupt source. */ |
| val = s->phy_int; |
| s->phy_int = 0; |
| phy_update_irq(s); |
| return val; |
| case 30: /* Interrupt mask */ |
| return s->phy_int_mask; |
| default: |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "do_phy_read: PHY read reg %d\n", reg); |
| return 0; |
| } |
| } |
| |
| static void do_phy_write(lan9118_state *s, int reg, uint32_t val) |
| { |
| switch (reg) { |
| case 0: /* Basic Control */ |
| if (val & 0x8000) { |
| phy_reset(s); |
| break; |
| } |
| s->phy_control = val & 0x7980; |
| /* Complete autonegotiation immediately. */ |
| if (val & 0x1000) { |
| s->phy_status |= 0x0020; |
| } |
| break; |
| case 4: /* Auto-neg advertisement */ |
| s->phy_advertise = (val & 0x2d7f) | 0x80; |
| break; |
| /* TODO 17, 18, 27, 31 */ |
| case 30: /* Interrupt mask */ |
| s->phy_int_mask = val & 0xff; |
| phy_update_irq(s); |
| break; |
| default: |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "do_phy_write: PHY write reg %d = 0x%04x\n", reg, val); |
| } |
| } |
| |
| static void do_mac_write(lan9118_state *s, int reg, uint32_t val) |
| { |
| switch (reg) { |
| case MAC_CR: |
| if ((s->mac_cr & MAC_CR_RXEN) != 0 && (val & MAC_CR_RXEN) == 0) { |
| s->int_sts |= RXSTOP_INT; |
| } |
| s->mac_cr = val & ~MAC_CR_RESERVED; |
| DPRINTF("MAC_CR: %08x\n", val); |
| break; |
| case MAC_ADDRH: |
| s->conf.macaddr.a[4] = val & 0xff; |
| s->conf.macaddr.a[5] = (val >> 8) & 0xff; |
| lan9118_mac_changed(s); |
| break; |
| case MAC_ADDRL: |
| s->conf.macaddr.a[0] = val & 0xff; |
| s->conf.macaddr.a[1] = (val >> 8) & 0xff; |
| s->conf.macaddr.a[2] = (val >> 16) & 0xff; |
| s->conf.macaddr.a[3] = (val >> 24) & 0xff; |
| lan9118_mac_changed(s); |
| break; |
| case MAC_HASHH: |
| s->mac_hashh = val; |
| break; |
| case MAC_HASHL: |
| s->mac_hashl = val; |
| break; |
| case MAC_MII_ACC: |
| s->mac_mii_acc = val & 0xffc2; |
| if (val & 2) { |
| DPRINTF("PHY write %d = 0x%04x\n", |
| (val >> 6) & 0x1f, s->mac_mii_data); |
| do_phy_write(s, (val >> 6) & 0x1f, s->mac_mii_data); |
| } else { |
| s->mac_mii_data = do_phy_read(s, (val >> 6) & 0x1f); |
| DPRINTF("PHY read %d = 0x%04x\n", |
| (val >> 6) & 0x1f, s->mac_mii_data); |
| } |
| break; |
| case MAC_MII_DATA: |
| s->mac_mii_data = val & 0xffff; |
| break; |
| case MAC_FLOW: |
| s->mac_flow = val & 0xffff0000; |
| break; |
| case MAC_VLAN1: |
| /* Writing to this register changes a condition for |
| * FrameTooLong bit in rx_status. Since we do not set |
| * FrameTooLong anyway, just ignore write to this. |
| */ |
| break; |
| default: |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "lan9118: Unimplemented MAC register write: %d = 0x%x\n", |
| s->mac_cmd & 0xf, val); |
| } |
| } |
| |
| static uint32_t do_mac_read(lan9118_state *s, int reg) |
| { |
| switch (reg) { |
| case MAC_CR: |
| return s->mac_cr; |
| case MAC_ADDRH: |
| return s->conf.macaddr.a[4] | (s->conf.macaddr.a[5] << 8); |
| case MAC_ADDRL: |
| return s->conf.macaddr.a[0] | (s->conf.macaddr.a[1] << 8) |
| | (s->conf.macaddr.a[2] << 16) | (s->conf.macaddr.a[3] << 24); |
| case MAC_HASHH: |
| return s->mac_hashh; |
| case MAC_HASHL: |
| return s->mac_hashl; |
| case MAC_MII_ACC: |
| return s->mac_mii_acc; |
| case MAC_MII_DATA: |
| return s->mac_mii_data; |
| case MAC_FLOW: |
| return s->mac_flow; |
| default: |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "lan9118: Unimplemented MAC register read: %d\n", |
| s->mac_cmd & 0xf); |
| return 0; |
| } |
| } |
| |
| static void lan9118_eeprom_cmd(lan9118_state *s, int cmd, int addr) |
| { |
| s->e2p_cmd = (s->e2p_cmd & E2P_CMD_MAC_ADDR_LOADED) | (cmd << 28) | addr; |
| switch (cmd) { |
| case 0: |
| s->e2p_data = s->eeprom[addr]; |
| DPRINTF("EEPROM Read %d = 0x%02x\n", addr, s->e2p_data); |
| break; |
| case 1: |
| s->eeprom_writable = 0; |
| DPRINTF("EEPROM Write Disable\n"); |
| break; |
| case 2: /* EWEN */ |
| s->eeprom_writable = 1; |
| DPRINTF("EEPROM Write Enable\n"); |
| break; |
| case 3: /* WRITE */ |
| if (s->eeprom_writable) { |
| s->eeprom[addr] &= s->e2p_data; |
| DPRINTF("EEPROM Write %d = 0x%02x\n", addr, s->e2p_data); |
| } else { |
| DPRINTF("EEPROM Write %d (ignored)\n", addr); |
| } |
| break; |
| case 4: /* WRAL */ |
| if (s->eeprom_writable) { |
| for (addr = 0; addr < 128; addr++) { |
| s->eeprom[addr] &= s->e2p_data; |
| } |
| DPRINTF("EEPROM Write All 0x%02x\n", s->e2p_data); |
| } else { |
| DPRINTF("EEPROM Write All (ignored)\n"); |
| } |
| break; |
| case 5: /* ERASE */ |
| if (s->eeprom_writable) { |
| s->eeprom[addr] = 0xff; |
| DPRINTF("EEPROM Erase %d\n", addr); |
| } else { |
| DPRINTF("EEPROM Erase %d (ignored)\n", addr); |
| } |
| break; |
| case 6: /* ERAL */ |
| if (s->eeprom_writable) { |
| memset(s->eeprom, 0xff, 128); |
| DPRINTF("EEPROM Erase All\n"); |
| } else { |
| DPRINTF("EEPROM Erase All (ignored)\n"); |
| } |
| break; |
| case 7: /* RELOAD */ |
| lan9118_reload_eeprom(s); |
| break; |
| } |
| } |
| |
| static void lan9118_tick(void *opaque) |
| { |
| lan9118_state *s = (lan9118_state *)opaque; |
| if (s->int_en & GPT_INT) { |
| s->int_sts |= GPT_INT; |
| } |
| lan9118_update(s); |
| } |
| |
| static void lan9118_writel(void *opaque, hwaddr offset, |
| uint64_t val, unsigned size) |
| { |
| lan9118_state *s = (lan9118_state *)opaque; |
| offset &= 0xff; |
| |
| //DPRINTF("Write reg 0x%02x = 0x%08x\n", (int)offset, val); |
| if (offset >= TX_DATA_FIFO_PORT_FIRST && |
| offset <= TX_DATA_FIFO_PORT_LAST) { |
| /* TX FIFO */ |
| tx_fifo_push(s, val); |
| return; |
| } |
| switch (offset) { |
| case CSR_IRQ_CFG: |
| /* TODO: Implement interrupt deassertion intervals. */ |
| val &= (IRQ_EN | IRQ_POL | IRQ_TYPE); |
| s->irq_cfg = (s->irq_cfg & IRQ_INT) | val; |
| break; |
| case CSR_INT_STS: |
| s->int_sts &= ~val; |
| break; |
| case CSR_INT_EN: |
| s->int_en = val & ~RESERVED_INT; |
| s->int_sts |= val & SW_INT; |
| break; |
| case CSR_FIFO_INT: |
| DPRINTF("FIFO INT levels %08x\n", val); |
| s->fifo_int = val; |
| break; |
| case CSR_RX_CFG: |
| if (val & 0x8000) { |
| /* RX_DUMP */ |
| s->rx_fifo_used = 0; |
| s->rx_status_fifo_used = 0; |
| s->rx_packet_size_tail = s->rx_packet_size_head; |
| s->rx_packet_size[s->rx_packet_size_head] = 0; |
| } |
| s->rx_cfg = val & 0xcfff1ff0; |
| break; |
| case CSR_TX_CFG: |
| if (val & 0x8000) { |
| s->tx_status_fifo_used = 0; |
| } |
| if (val & 0x4000) { |
| s->txp->state = TX_IDLE; |
| s->txp->fifo_used = 0; |
| s->txp->cmd_a = 0xffffffff; |
| } |
| s->tx_cfg = val & 6; |
| break; |
| case CSR_HW_CFG: |
| if (val & 1) { |
| /* SRST */ |
| lan9118_reset(DEVICE(s)); |
| } else { |
| s->hw_cfg = (val & 0x003f300) | (s->hw_cfg & 0x4); |
| } |
| break; |
| case CSR_RX_DP_CTRL: |
| if (val & 0x80000000) { |
| /* Skip forward to next packet. */ |
| s->rxp_pad = 0; |
| s->rxp_offset = 0; |
| if (s->rxp_size == 0) { |
| /* Pop a word to start the next packet. */ |
| rx_fifo_pop(s); |
| s->rxp_pad = 0; |
| s->rxp_offset = 0; |
| } |
| s->rx_fifo_head += s->rxp_size; |
| if (s->rx_fifo_head >= s->rx_fifo_size) { |
| s->rx_fifo_head -= s->rx_fifo_size; |
| } |
| } |
| break; |
| case CSR_PMT_CTRL: |
| if (val & 0x400) { |
| phy_reset(s); |
| } |
| s->pmt_ctrl &= ~0x34e; |
| s->pmt_ctrl |= (val & 0x34e); |
| break; |
| case CSR_GPIO_CFG: |
| /* Probably just enabling LEDs. */ |
| s->gpio_cfg = val & 0x7777071f; |
| break; |
| case CSR_GPT_CFG: |
| if ((s->gpt_cfg ^ val) & GPT_TIMER_EN) { |
| ptimer_transaction_begin(s->timer); |
| if (val & GPT_TIMER_EN) { |
| ptimer_set_count(s->timer, val & 0xffff); |
| ptimer_run(s->timer, 0); |
| } else { |
| ptimer_stop(s->timer); |
| ptimer_set_count(s->timer, 0xffff); |
| } |
| ptimer_transaction_commit(s->timer); |
| } |
| s->gpt_cfg = val & (GPT_TIMER_EN | 0xffff); |
| break; |
| case CSR_WORD_SWAP: |
| /* Ignored because we're in 32-bit mode. */ |
| s->word_swap = val; |
| break; |
| case CSR_MAC_CSR_CMD: |
| s->mac_cmd = val & 0x4000000f; |
| if (val & 0x80000000) { |
| if (val & 0x40000000) { |
| s->mac_data = do_mac_read(s, val & 0xf); |
| DPRINTF("MAC read %d = 0x%08x\n", val & 0xf, s->mac_data); |
| } else { |
| DPRINTF("MAC write %d = 0x%08x\n", val & 0xf, s->mac_data); |
| do_mac_write(s, val & 0xf, s->mac_data); |
| } |
| } |
| break; |
| case CSR_MAC_CSR_DATA: |
| s->mac_data = val; |
| break; |
| case CSR_AFC_CFG: |
| s->afc_cfg = val & 0x00ffffff; |
| break; |
| case CSR_E2P_CMD: |
| lan9118_eeprom_cmd(s, (val >> 28) & 7, val & 0x7f); |
| break; |
| case CSR_E2P_DATA: |
| s->e2p_data = val & 0xff; |
| break; |
| |
| default: |
| qemu_log_mask(LOG_GUEST_ERROR, "lan9118_write: Bad reg 0x%x = %x\n", |
| (int)offset, (int)val); |
| break; |
| } |
| lan9118_update(s); |
| } |
| |
| static void lan9118_writew(void *opaque, hwaddr offset, |
| uint32_t val) |
| { |
| lan9118_state *s = (lan9118_state *)opaque; |
| offset &= 0xff; |
| |
| if (s->write_word_prev_offset != (offset & ~0x3)) { |
| /* New offset, reset word counter */ |
| s->write_word_n = 0; |
| s->write_word_prev_offset = offset & ~0x3; |
| } |
| |
| if (offset & 0x2) { |
| s->write_word_h = val; |
| } else { |
| s->write_word_l = val; |
| } |
| |
| //DPRINTF("Writew reg 0x%02x = 0x%08x\n", (int)offset, val); |
| s->write_word_n++; |
| if (s->write_word_n == 2) { |
| s->write_word_n = 0; |
| lan9118_writel(s, offset & ~3, s->write_word_l + |
| (s->write_word_h << 16), 4); |
| } |
| } |
| |
| static void lan9118_16bit_mode_write(void *opaque, hwaddr offset, |
| uint64_t val, unsigned size) |
| { |
| switch (size) { |
| case 2: |
| lan9118_writew(opaque, offset, (uint32_t)val); |
| return; |
| case 4: |
| lan9118_writel(opaque, offset, val, size); |
| return; |
| } |
| |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "lan9118_16bit_mode_write: Bad size 0x%x\n", size); |
| } |
| |
| static uint64_t lan9118_readl(void *opaque, hwaddr offset, |
| unsigned size) |
| { |
| lan9118_state *s = (lan9118_state *)opaque; |
| |
| //DPRINTF("Read reg 0x%02x\n", (int)offset); |
| if (offset <= RX_DATA_FIFO_PORT_LAST) { |
| /* RX FIFO */ |
| return rx_fifo_pop(s); |
| } |
| switch (offset) { |
| case RX_STATUS_FIFO_PORT: |
| return rx_status_fifo_pop(s); |
| case RX_STATUS_FIFO_PEEK: |
| return s->rx_status_fifo[s->rx_status_fifo_head]; |
| case TX_STATUS_FIFO_PORT: |
| return tx_status_fifo_pop(s); |
| case TX_STATUS_FIFO_PEEK: |
| return s->tx_status_fifo[s->tx_status_fifo_head]; |
| case CSR_ID_REV: |
| return 0x01180001; |
| case CSR_IRQ_CFG: |
| return s->irq_cfg; |
| case CSR_INT_STS: |
| return s->int_sts; |
| case CSR_INT_EN: |
| return s->int_en; |
| case CSR_BYTE_TEST: |
| return 0x87654321; |
| case CSR_FIFO_INT: |
| return s->fifo_int; |
| case CSR_RX_CFG: |
| return s->rx_cfg; |
| case CSR_TX_CFG: |
| return s->tx_cfg; |
| case CSR_HW_CFG: |
| return s->hw_cfg; |
| case CSR_RX_DP_CTRL: |
| return 0; |
| case CSR_RX_FIFO_INF: |
| return (s->rx_status_fifo_used << 16) | (s->rx_fifo_used << 2); |
| case CSR_TX_FIFO_INF: |
| return (s->tx_status_fifo_used << 16) |
| | (s->tx_fifo_size - s->txp->fifo_used); |
| case CSR_PMT_CTRL: |
| return s->pmt_ctrl; |
| case CSR_GPIO_CFG: |
| return s->gpio_cfg; |
| case CSR_GPT_CFG: |
| return s->gpt_cfg; |
| case CSR_GPT_CNT: |
| return ptimer_get_count(s->timer); |
| case CSR_WORD_SWAP: |
| return s->word_swap; |
| case CSR_FREE_RUN: |
| return (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) / 40) - s->free_timer_start; |
| case CSR_RX_DROP: |
| /* TODO: Implement dropped frames counter. */ |
| return 0; |
| case CSR_MAC_CSR_CMD: |
| return s->mac_cmd; |
| case CSR_MAC_CSR_DATA: |
| return s->mac_data; |
| case CSR_AFC_CFG: |
| return s->afc_cfg; |
| case CSR_E2P_CMD: |
| return s->e2p_cmd; |
| case CSR_E2P_DATA: |
| return s->e2p_data; |
| } |
| qemu_log_mask(LOG_GUEST_ERROR, "lan9118_read: Bad reg 0x%x\n", (int)offset); |
| return 0; |
| } |
| |
| static uint32_t lan9118_readw(void *opaque, hwaddr offset) |
| { |
| lan9118_state *s = (lan9118_state *)opaque; |
| uint32_t val; |
| |
| if (s->read_word_prev_offset != (offset & ~0x3)) { |
| /* New offset, reset word counter */ |
| s->read_word_n = 0; |
| s->read_word_prev_offset = offset & ~0x3; |
| } |
| |
| s->read_word_n++; |
| if (s->read_word_n == 1) { |
| s->read_long = lan9118_readl(s, offset & ~3, 4); |
| } else { |
| s->read_word_n = 0; |
| } |
| |
| if (offset & 2) { |
| val = s->read_long >> 16; |
| } else { |
| val = s->read_long & 0xFFFF; |
| } |
| |
| //DPRINTF("Readw reg 0x%02x, val 0x%x\n", (int)offset, val); |
| return val; |
| } |
| |
| static uint64_t lan9118_16bit_mode_read(void *opaque, hwaddr offset, |
| unsigned size) |
| { |
| switch (size) { |
| case 2: |
| return lan9118_readw(opaque, offset); |
| case 4: |
| return lan9118_readl(opaque, offset, size); |
| } |
| |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "lan9118_16bit_mode_read: Bad size 0x%x\n", size); |
| return 0; |
| } |
| |
| static const MemoryRegionOps lan9118_mem_ops = { |
| .read = lan9118_readl, |
| .write = lan9118_writel, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static const MemoryRegionOps lan9118_16bit_mem_ops = { |
| .read = lan9118_16bit_mode_read, |
| .write = lan9118_16bit_mode_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static NetClientInfo net_lan9118_info = { |
| .type = NET_CLIENT_DRIVER_NIC, |
| .size = sizeof(NICState), |
| .receive = lan9118_receive, |
| .link_status_changed = lan9118_set_link, |
| }; |
| |
| static void lan9118_realize(DeviceState *dev, Error **errp) |
| { |
| SysBusDevice *sbd = SYS_BUS_DEVICE(dev); |
| lan9118_state *s = LAN9118(dev); |
| int i; |
| const MemoryRegionOps *mem_ops = |
| s->mode_16bit ? &lan9118_16bit_mem_ops : &lan9118_mem_ops; |
| |
| memory_region_init_io(&s->mmio, OBJECT(dev), mem_ops, s, |
| "lan9118-mmio", 0x100); |
| sysbus_init_mmio(sbd, &s->mmio); |
| sysbus_init_irq(sbd, &s->irq); |
| qemu_macaddr_default_if_unset(&s->conf.macaddr); |
| |
| s->nic = qemu_new_nic(&net_lan9118_info, &s->conf, |
| object_get_typename(OBJECT(dev)), dev->id, |
| &dev->mem_reentrancy_guard, s); |
| qemu_format_nic_info_str(qemu_get_queue(s->nic), s->conf.macaddr.a); |
| s->eeprom[0] = 0xa5; |
| for (i = 0; i < 6; i++) { |
| s->eeprom[i + 1] = s->conf.macaddr.a[i]; |
| } |
| s->pmt_ctrl = 1; |
| s->txp = &s->tx_packet; |
| |
| s->timer = ptimer_init(lan9118_tick, s, PTIMER_POLICY_LEGACY); |
| ptimer_transaction_begin(s->timer); |
| ptimer_set_freq(s->timer, 10000); |
| ptimer_set_limit(s->timer, 0xffff, 1); |
| ptimer_transaction_commit(s->timer); |
| } |
| |
| static Property lan9118_properties[] = { |
| DEFINE_NIC_PROPERTIES(lan9118_state, conf), |
| DEFINE_PROP_UINT32("mode_16bit", lan9118_state, mode_16bit, 0), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void lan9118_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| dc->reset = lan9118_reset; |
| device_class_set_props(dc, lan9118_properties); |
| dc->vmsd = &vmstate_lan9118; |
| dc->realize = lan9118_realize; |
| } |
| |
| static const TypeInfo lan9118_info = { |
| .name = TYPE_LAN9118, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(lan9118_state), |
| .class_init = lan9118_class_init, |
| }; |
| |
| static void lan9118_register_types(void) |
| { |
| type_register_static(&lan9118_info); |
| } |
| |
| /* Legacy helper function. Should go away when machine config files are |
| implemented. */ |
| void lan9118_init(NICInfo *nd, uint32_t base, qemu_irq irq) |
| { |
| DeviceState *dev; |
| SysBusDevice *s; |
| |
| qemu_check_nic_model(nd, "lan9118"); |
| dev = qdev_new(TYPE_LAN9118); |
| qdev_set_nic_properties(dev, nd); |
| s = SYS_BUS_DEVICE(dev); |
| sysbus_realize_and_unref(s, &error_fatal); |
| sysbus_mmio_map(s, 0, base); |
| sysbus_connect_irq(s, 0, irq); |
| } |
| |
| type_init(lan9118_register_types) |