aspeed: fix hardcode boot address 0
In the previous design of ASPEED SOCs QEMU model, it set the boot
address at "0" which was the hardcode setting for ast10x0, ast2600,
ast2500 and ast2400.
According to the design of ast2700, it has a bootmcu(riscv-32) which
is used for executing SPL and initialize DRAM and copy u-boot image
from SPI/Flash to DRAM at address 0x400000000 at SPL boot stage.
Then, CPUs(cortex-a35) execute u-boot, kernel and rofs.
Currently, qemu not support emulate two CPU architectures
at the same machine. Therefore, qemu will only support
to emulate CPU(cortex-a35) side for ast2700 and the boot
address is "0x4 00000000".
Fixed hardcode boot address "0" for future models using
a different mapping address.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index 0af96af..8854581 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -289,12 +289,14 @@
uint64_t rom_size)
{
AspeedSoCState *soc = bmc->soc;
+ AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(soc);
memory_region_init_rom(&bmc->boot_rom, NULL, "aspeed.boot_rom", rom_size,
&error_abort);
memory_region_add_subregion_overlap(&soc->spi_boot_container, 0,
&bmc->boot_rom, 1);
- write_boot_rom(blk, ASPEED_SOC_SPI_BOOT_ADDR, rom_size, &error_abort);
+ write_boot_rom(blk, sc->memmap[ASPEED_DEV_SPI_BOOT],
+ rom_size, &error_abort);
}
void aspeed_board_init_flashes(AspeedSMCState *s, const char *flashtype,
diff --git a/hw/arm/aspeed_ast2400.c b/hw/arm/aspeed_ast2400.c
index 95da85f..d125886 100644
--- a/hw/arm/aspeed_ast2400.c
+++ b/hw/arm/aspeed_ast2400.c
@@ -26,7 +26,7 @@
#define ASPEED_SOC_IOMEM_SIZE 0x00200000
static const hwaddr aspeed_soc_ast2400_memmap[] = {
- [ASPEED_DEV_SPI_BOOT] = ASPEED_SOC_SPI_BOOT_ADDR,
+ [ASPEED_DEV_SPI_BOOT] = 0x00000000,
[ASPEED_DEV_IOMEM] = 0x1E600000,
[ASPEED_DEV_FMC] = 0x1E620000,
[ASPEED_DEV_SPI1] = 0x1E630000,
@@ -61,7 +61,7 @@
};
static const hwaddr aspeed_soc_ast2500_memmap[] = {
- [ASPEED_DEV_SPI_BOOT] = ASPEED_SOC_SPI_BOOT_ADDR,
+ [ASPEED_DEV_SPI_BOOT] = 0x00000000,
[ASPEED_DEV_IOMEM] = 0x1E600000,
[ASPEED_DEV_FMC] = 0x1E620000,
[ASPEED_DEV_SPI1] = 0x1E630000,
diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c
index f74561e..174be53 100644
--- a/hw/arm/aspeed_ast2600.c
+++ b/hw/arm/aspeed_ast2600.c
@@ -22,7 +22,7 @@
#define ASPEED_SOC_DPMCU_SIZE 0x00040000
static const hwaddr aspeed_soc_ast2600_memmap[] = {
- [ASPEED_DEV_SPI_BOOT] = ASPEED_SOC_SPI_BOOT_ADDR,
+ [ASPEED_DEV_SPI_BOOT] = 0x00000000,
[ASPEED_DEV_SRAM] = 0x10000000,
[ASPEED_DEV_DPMCU] = 0x18000000,
/* 0x16000000 0x17FFFFFF : AHB BUS do LPC Bus bridge */
diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h
index e1a023b..c60fac9 100644
--- a/include/hw/arm/aspeed_soc.h
+++ b/include/hw/arm/aspeed_soc.h
@@ -224,8 +224,6 @@
ASPEED_DEV_FSI2,
};
-#define ASPEED_SOC_SPI_BOOT_ADDR 0x0
-
qemu_irq aspeed_soc_get_irq(AspeedSoCState *s, int dev);
bool aspeed_soc_uart_realize(AspeedSoCState *s, Error **errp);
void aspeed_soc_uart_set_chr(AspeedSoCState *s, int dev, Chardev *chr);
