| #include "qemu/osdep.h" |
| #include "net/net.h" |
| #include "hw/qdev.h" |
| #include "qapi/error.h" |
| #include "hw/pci/pci.h" |
| #include "qapi/qmp/qerror.h" |
| #include "qemu/error-report.h" |
| #include "hw/block/block.h" |
| #include "net/hub.h" |
| #include "qapi/visitor.h" |
| #include "chardev/char.h" |
| #include "qemu/uuid.h" |
| |
| void qdev_prop_set_after_realize(DeviceState *dev, const char *name, |
| Error **errp) |
| { |
| if (dev->id) { |
| error_setg(errp, "Attempt to set property '%s' on device '%s' " |
| "(type '%s') after it was realized", name, dev->id, |
| object_get_typename(OBJECT(dev))); |
| } else { |
| error_setg(errp, "Attempt to set property '%s' on anonymous device " |
| "(type '%s') after it was realized", name, |
| object_get_typename(OBJECT(dev))); |
| } |
| } |
| |
| void qdev_prop_allow_set_link_before_realize(const Object *obj, |
| const char *name, |
| Object *val, Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| |
| if (dev->realized) { |
| error_setg(errp, "Attempt to set link property '%s' on device '%s' " |
| "(type '%s') after it was realized", |
| name, dev->id, object_get_typename(obj)); |
| } |
| } |
| |
| void *qdev_get_prop_ptr(DeviceState *dev, Property *prop) |
| { |
| void *ptr = dev; |
| ptr += prop->offset; |
| return ptr; |
| } |
| |
| static void get_enum(Object *obj, Visitor *v, const char *name, void *opaque, |
| Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| Property *prop = opaque; |
| int *ptr = qdev_get_prop_ptr(dev, prop); |
| |
| visit_type_enum(v, prop->name, ptr, prop->info->enum_table, errp); |
| } |
| |
| static void set_enum(Object *obj, Visitor *v, const char *name, void *opaque, |
| Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| Property *prop = opaque; |
| int *ptr = qdev_get_prop_ptr(dev, prop); |
| |
| if (dev->realized) { |
| qdev_prop_set_after_realize(dev, name, errp); |
| return; |
| } |
| |
| visit_type_enum(v, prop->name, ptr, prop->info->enum_table, errp); |
| } |
| |
| static void set_default_value_enum(Object *obj, const Property *prop) |
| { |
| object_property_set_str(obj, |
| qapi_enum_lookup(prop->info->enum_table, |
| prop->defval.i), |
| prop->name, &error_abort); |
| } |
| |
| /* Bit */ |
| |
| static uint32_t qdev_get_prop_mask(Property *prop) |
| { |
| assert(prop->info == &qdev_prop_bit); |
| return 0x1 << prop->bitnr; |
| } |
| |
| static void bit_prop_set(DeviceState *dev, Property *props, bool val) |
| { |
| uint32_t *p = qdev_get_prop_ptr(dev, props); |
| uint32_t mask = qdev_get_prop_mask(props); |
| if (val) { |
| *p |= mask; |
| } else { |
| *p &= ~mask; |
| } |
| } |
| |
| static void prop_get_bit(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| Property *prop = opaque; |
| uint32_t *p = qdev_get_prop_ptr(dev, prop); |
| bool value = (*p & qdev_get_prop_mask(prop)) != 0; |
| |
| visit_type_bool(v, name, &value, errp); |
| } |
| |
| static void prop_set_bit(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| Property *prop = opaque; |
| Error *local_err = NULL; |
| bool value; |
| |
| if (dev->realized) { |
| qdev_prop_set_after_realize(dev, name, errp); |
| return; |
| } |
| |
| visit_type_bool(v, name, &value, &local_err); |
| if (local_err) { |
| error_propagate(errp, local_err); |
| return; |
| } |
| bit_prop_set(dev, prop, value); |
| } |
| |
| static void set_default_value_bool(Object *obj, const Property *prop) |
| { |
| object_property_set_bool(obj, prop->defval.u, prop->name, &error_abort); |
| } |
| |
| const PropertyInfo qdev_prop_bit = { |
| .name = "bool", |
| .description = "on/off", |
| .get = prop_get_bit, |
| .set = prop_set_bit, |
| .set_default_value = set_default_value_bool, |
| }; |
| |
| /* Bit64 */ |
| |
| static uint64_t qdev_get_prop_mask64(Property *prop) |
| { |
| assert(prop->info == &qdev_prop_bit64); |
| return 0x1ull << prop->bitnr; |
| } |
| |
| static void bit64_prop_set(DeviceState *dev, Property *props, bool val) |
| { |
| uint64_t *p = qdev_get_prop_ptr(dev, props); |
| uint64_t mask = qdev_get_prop_mask64(props); |
| if (val) { |
| *p |= mask; |
| } else { |
| *p &= ~mask; |
| } |
| } |
| |
| static void prop_get_bit64(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| Property *prop = opaque; |
| uint64_t *p = qdev_get_prop_ptr(dev, prop); |
| bool value = (*p & qdev_get_prop_mask64(prop)) != 0; |
| |
| visit_type_bool(v, name, &value, errp); |
| } |
| |
| static void prop_set_bit64(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| Property *prop = opaque; |
| Error *local_err = NULL; |
| bool value; |
| |
| if (dev->realized) { |
| qdev_prop_set_after_realize(dev, name, errp); |
| return; |
| } |
| |
| visit_type_bool(v, name, &value, &local_err); |
| if (local_err) { |
| error_propagate(errp, local_err); |
| return; |
| } |
| bit64_prop_set(dev, prop, value); |
| } |
| |
| const PropertyInfo qdev_prop_bit64 = { |
| .name = "bool", |
| .description = "on/off", |
| .get = prop_get_bit64, |
| .set = prop_set_bit64, |
| .set_default_value = set_default_value_bool, |
| }; |
| |
| /* --- bool --- */ |
| |
| static void get_bool(Object *obj, Visitor *v, const char *name, void *opaque, |
| Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| Property *prop = opaque; |
| bool *ptr = qdev_get_prop_ptr(dev, prop); |
| |
| visit_type_bool(v, name, ptr, errp); |
| } |
| |
| static void set_bool(Object *obj, Visitor *v, const char *name, void *opaque, |
| Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| Property *prop = opaque; |
| bool *ptr = qdev_get_prop_ptr(dev, prop); |
| |
| if (dev->realized) { |
| qdev_prop_set_after_realize(dev, name, errp); |
| return; |
| } |
| |
| visit_type_bool(v, name, ptr, errp); |
| } |
| |
| const PropertyInfo qdev_prop_bool = { |
| .name = "bool", |
| .get = get_bool, |
| .set = set_bool, |
| .set_default_value = set_default_value_bool, |
| }; |
| |
| /* --- 8bit integer --- */ |
| |
| static void get_uint8(Object *obj, Visitor *v, const char *name, void *opaque, |
| Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| Property *prop = opaque; |
| uint8_t *ptr = qdev_get_prop_ptr(dev, prop); |
| |
| visit_type_uint8(v, name, ptr, errp); |
| } |
| |
| static void set_uint8(Object *obj, Visitor *v, const char *name, void *opaque, |
| Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| Property *prop = opaque; |
| uint8_t *ptr = qdev_get_prop_ptr(dev, prop); |
| |
| if (dev->realized) { |
| qdev_prop_set_after_realize(dev, name, errp); |
| return; |
| } |
| |
| visit_type_uint8(v, name, ptr, errp); |
| } |
| |
| static void set_default_value_int(Object *obj, const Property *prop) |
| { |
| object_property_set_int(obj, prop->defval.i, prop->name, &error_abort); |
| } |
| |
| static void set_default_value_uint(Object *obj, const Property *prop) |
| { |
| object_property_set_uint(obj, prop->defval.u, prop->name, &error_abort); |
| } |
| |
| const PropertyInfo qdev_prop_uint8 = { |
| .name = "uint8", |
| .get = get_uint8, |
| .set = set_uint8, |
| .set_default_value = set_default_value_uint, |
| }; |
| |
| /* --- 16bit integer --- */ |
| |
| static void get_uint16(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| Property *prop = opaque; |
| uint16_t *ptr = qdev_get_prop_ptr(dev, prop); |
| |
| visit_type_uint16(v, name, ptr, errp); |
| } |
| |
| static void set_uint16(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| Property *prop = opaque; |
| uint16_t *ptr = qdev_get_prop_ptr(dev, prop); |
| |
| if (dev->realized) { |
| qdev_prop_set_after_realize(dev, name, errp); |
| return; |
| } |
| |
| visit_type_uint16(v, name, ptr, errp); |
| } |
| |
| const PropertyInfo qdev_prop_uint16 = { |
| .name = "uint16", |
| .get = get_uint16, |
| .set = set_uint16, |
| .set_default_value = set_default_value_uint, |
| }; |
| |
| /* --- 32bit integer --- */ |
| |
| static void get_uint32(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| Property *prop = opaque; |
| uint32_t *ptr = qdev_get_prop_ptr(dev, prop); |
| |
| visit_type_uint32(v, name, ptr, errp); |
| } |
| |
| static void set_uint32(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| Property *prop = opaque; |
| uint32_t *ptr = qdev_get_prop_ptr(dev, prop); |
| |
| if (dev->realized) { |
| qdev_prop_set_after_realize(dev, name, errp); |
| return; |
| } |
| |
| visit_type_uint32(v, name, ptr, errp); |
| } |
| |
| static void get_int32(Object *obj, Visitor *v, const char *name, void *opaque, |
| Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| Property *prop = opaque; |
| int32_t *ptr = qdev_get_prop_ptr(dev, prop); |
| |
| visit_type_int32(v, name, ptr, errp); |
| } |
| |
| static void set_int32(Object *obj, Visitor *v, const char *name, void *opaque, |
| Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| Property *prop = opaque; |
| int32_t *ptr = qdev_get_prop_ptr(dev, prop); |
| |
| if (dev->realized) { |
| qdev_prop_set_after_realize(dev, name, errp); |
| return; |
| } |
| |
| visit_type_int32(v, name, ptr, errp); |
| } |
| |
| const PropertyInfo qdev_prop_uint32 = { |
| .name = "uint32", |
| .get = get_uint32, |
| .set = set_uint32, |
| .set_default_value = set_default_value_uint, |
| }; |
| |
| const PropertyInfo qdev_prop_int32 = { |
| .name = "int32", |
| .get = get_int32, |
| .set = set_int32, |
| .set_default_value = set_default_value_int, |
| }; |
| |
| /* --- 64bit integer --- */ |
| |
| static void get_uint64(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| Property *prop = opaque; |
| uint64_t *ptr = qdev_get_prop_ptr(dev, prop); |
| |
| visit_type_uint64(v, name, ptr, errp); |
| } |
| |
| static void set_uint64(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| Property *prop = opaque; |
| uint64_t *ptr = qdev_get_prop_ptr(dev, prop); |
| |
| if (dev->realized) { |
| qdev_prop_set_after_realize(dev, name, errp); |
| return; |
| } |
| |
| visit_type_uint64(v, name, ptr, errp); |
| } |
| |
| static void get_int64(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| Property *prop = opaque; |
| int64_t *ptr = qdev_get_prop_ptr(dev, prop); |
| |
| visit_type_int64(v, name, ptr, errp); |
| } |
| |
| static void set_int64(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| Property *prop = opaque; |
| int64_t *ptr = qdev_get_prop_ptr(dev, prop); |
| |
| if (dev->realized) { |
| qdev_prop_set_after_realize(dev, name, errp); |
| return; |
| } |
| |
| visit_type_int64(v, name, ptr, errp); |
| } |
| |
| const PropertyInfo qdev_prop_uint64 = { |
| .name = "uint64", |
| .get = get_uint64, |
| .set = set_uint64, |
| .set_default_value = set_default_value_uint, |
| }; |
| |
| const PropertyInfo qdev_prop_int64 = { |
| .name = "int64", |
| .get = get_int64, |
| .set = set_int64, |
| .set_default_value = set_default_value_int, |
| }; |
| |
| /* --- string --- */ |
| |
| static void release_string(Object *obj, const char *name, void *opaque) |
| { |
| Property *prop = opaque; |
| g_free(*(char **)qdev_get_prop_ptr(DEVICE(obj), prop)); |
| } |
| |
| static void get_string(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| Property *prop = opaque; |
| char **ptr = qdev_get_prop_ptr(dev, prop); |
| |
| if (!*ptr) { |
| char *str = (char *)""; |
| visit_type_str(v, name, &str, errp); |
| } else { |
| visit_type_str(v, name, ptr, errp); |
| } |
| } |
| |
| static void set_string(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| Property *prop = opaque; |
| char **ptr = qdev_get_prop_ptr(dev, prop); |
| Error *local_err = NULL; |
| char *str; |
| |
| if (dev->realized) { |
| qdev_prop_set_after_realize(dev, name, errp); |
| return; |
| } |
| |
| visit_type_str(v, name, &str, &local_err); |
| if (local_err) { |
| error_propagate(errp, local_err); |
| return; |
| } |
| g_free(*ptr); |
| *ptr = str; |
| } |
| |
| const PropertyInfo qdev_prop_string = { |
| .name = "str", |
| .release = release_string, |
| .get = get_string, |
| .set = set_string, |
| }; |
| |
| /* --- pointer --- */ |
| |
| /* Not a proper property, just for dirty hacks. TODO Remove it! */ |
| const PropertyInfo qdev_prop_ptr = { |
| .name = "ptr", |
| }; |
| |
| /* --- mac address --- */ |
| |
| /* |
| * accepted syntax versions: |
| * 01:02:03:04:05:06 |
| * 01-02-03-04-05-06 |
| */ |
| static void get_mac(Object *obj, Visitor *v, const char *name, void *opaque, |
| Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| Property *prop = opaque; |
| MACAddr *mac = qdev_get_prop_ptr(dev, prop); |
| char buffer[2 * 6 + 5 + 1]; |
| char *p = buffer; |
| |
| snprintf(buffer, sizeof(buffer), "%02x:%02x:%02x:%02x:%02x:%02x", |
| mac->a[0], mac->a[1], mac->a[2], |
| mac->a[3], mac->a[4], mac->a[5]); |
| |
| visit_type_str(v, name, &p, errp); |
| } |
| |
| static void set_mac(Object *obj, Visitor *v, const char *name, void *opaque, |
| Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| Property *prop = opaque; |
| MACAddr *mac = qdev_get_prop_ptr(dev, prop); |
| Error *local_err = NULL; |
| int i, pos; |
| char *str, *p; |
| |
| if (dev->realized) { |
| qdev_prop_set_after_realize(dev, name, errp); |
| return; |
| } |
| |
| visit_type_str(v, name, &str, &local_err); |
| if (local_err) { |
| error_propagate(errp, local_err); |
| return; |
| } |
| |
| for (i = 0, pos = 0; i < 6; i++, pos += 3) { |
| if (!qemu_isxdigit(str[pos])) { |
| goto inval; |
| } |
| if (!qemu_isxdigit(str[pos+1])) { |
| goto inval; |
| } |
| if (i == 5) { |
| if (str[pos+2] != '\0') { |
| goto inval; |
| } |
| } else { |
| if (str[pos+2] != ':' && str[pos+2] != '-') { |
| goto inval; |
| } |
| } |
| mac->a[i] = strtol(str+pos, &p, 16); |
| } |
| g_free(str); |
| return; |
| |
| inval: |
| error_set_from_qdev_prop_error(errp, EINVAL, dev, prop, str); |
| g_free(str); |
| } |
| |
| const PropertyInfo qdev_prop_macaddr = { |
| .name = "str", |
| .description = "Ethernet 6-byte MAC Address, example: 52:54:00:12:34:56", |
| .get = get_mac, |
| .set = set_mac, |
| }; |
| |
| /* --- on/off/auto --- */ |
| |
| const PropertyInfo qdev_prop_on_off_auto = { |
| .name = "OnOffAuto", |
| .description = "on/off/auto", |
| .enum_table = &OnOffAuto_lookup, |
| .get = get_enum, |
| .set = set_enum, |
| .set_default_value = set_default_value_enum, |
| }; |
| |
| /* --- lost tick policy --- */ |
| |
| QEMU_BUILD_BUG_ON(sizeof(LostTickPolicy) != sizeof(int)); |
| |
| const PropertyInfo qdev_prop_losttickpolicy = { |
| .name = "LostTickPolicy", |
| .enum_table = &LostTickPolicy_lookup, |
| .get = get_enum, |
| .set = set_enum, |
| .set_default_value = set_default_value_enum, |
| }; |
| |
| /* --- Block device error handling policy --- */ |
| |
| QEMU_BUILD_BUG_ON(sizeof(BlockdevOnError) != sizeof(int)); |
| |
| const PropertyInfo qdev_prop_blockdev_on_error = { |
| .name = "BlockdevOnError", |
| .description = "Error handling policy, " |
| "report/ignore/enospc/stop/auto", |
| .enum_table = &BlockdevOnError_lookup, |
| .get = get_enum, |
| .set = set_enum, |
| .set_default_value = set_default_value_enum, |
| }; |
| |
| /* --- BIOS CHS translation */ |
| |
| QEMU_BUILD_BUG_ON(sizeof(BiosAtaTranslation) != sizeof(int)); |
| |
| const PropertyInfo qdev_prop_bios_chs_trans = { |
| .name = "BiosAtaTranslation", |
| .description = "Logical CHS translation algorithm, " |
| "auto/none/lba/large/rechs", |
| .enum_table = &BiosAtaTranslation_lookup, |
| .get = get_enum, |
| .set = set_enum, |
| .set_default_value = set_default_value_enum, |
| }; |
| |
| /* --- FDC default drive types */ |
| |
| const PropertyInfo qdev_prop_fdc_drive_type = { |
| .name = "FdcDriveType", |
| .description = "FDC drive type, " |
| "144/288/120/none/auto", |
| .enum_table = &FloppyDriveType_lookup, |
| .get = get_enum, |
| .set = set_enum, |
| .set_default_value = set_default_value_enum, |
| }; |
| |
| /* --- pci address --- */ |
| |
| /* |
| * bus-local address, i.e. "$slot" or "$slot.$fn" |
| */ |
| static void set_pci_devfn(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| Property *prop = opaque; |
| int32_t value, *ptr = qdev_get_prop_ptr(dev, prop); |
| unsigned int slot, fn, n; |
| Error *local_err = NULL; |
| char *str; |
| |
| if (dev->realized) { |
| qdev_prop_set_after_realize(dev, name, errp); |
| return; |
| } |
| |
| visit_type_str(v, name, &str, &local_err); |
| if (local_err) { |
| error_free(local_err); |
| local_err = NULL; |
| visit_type_int32(v, name, &value, &local_err); |
| if (local_err) { |
| error_propagate(errp, local_err); |
| } else if (value < -1 || value > 255) { |
| error_setg(errp, QERR_INVALID_PARAMETER_VALUE, |
| name ? name : "null", "pci_devfn"); |
| } else { |
| *ptr = value; |
| } |
| return; |
| } |
| |
| if (sscanf(str, "%x.%x%n", &slot, &fn, &n) != 2) { |
| fn = 0; |
| if (sscanf(str, "%x%n", &slot, &n) != 1) { |
| goto invalid; |
| } |
| } |
| if (str[n] != '\0' || fn > 7 || slot > 31) { |
| goto invalid; |
| } |
| *ptr = slot << 3 | fn; |
| g_free(str); |
| return; |
| |
| invalid: |
| error_set_from_qdev_prop_error(errp, EINVAL, dev, prop, str); |
| g_free(str); |
| } |
| |
| static int print_pci_devfn(DeviceState *dev, Property *prop, char *dest, |
| size_t len) |
| { |
| int32_t *ptr = qdev_get_prop_ptr(dev, prop); |
| |
| if (*ptr == -1) { |
| return snprintf(dest, len, "<unset>"); |
| } else { |
| return snprintf(dest, len, "%02x.%x", *ptr >> 3, *ptr & 7); |
| } |
| } |
| |
| const PropertyInfo qdev_prop_pci_devfn = { |
| .name = "int32", |
| .description = "Slot and optional function number, example: 06.0 or 06", |
| .print = print_pci_devfn, |
| .get = get_int32, |
| .set = set_pci_devfn, |
| .set_default_value = set_default_value_int, |
| }; |
| |
| /* --- blocksize --- */ |
| |
| static void set_blocksize(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| Property *prop = opaque; |
| uint16_t value, *ptr = qdev_get_prop_ptr(dev, prop); |
| Error *local_err = NULL; |
| const int64_t min = 512; |
| const int64_t max = 32768; |
| |
| if (dev->realized) { |
| qdev_prop_set_after_realize(dev, name, errp); |
| return; |
| } |
| |
| visit_type_uint16(v, name, &value, &local_err); |
| if (local_err) { |
| error_propagate(errp, local_err); |
| return; |
| } |
| /* value of 0 means "unset" */ |
| if (value && (value < min || value > max)) { |
| error_setg(errp, QERR_PROPERTY_VALUE_OUT_OF_RANGE, |
| dev->id ? : "", name, (int64_t)value, min, max); |
| return; |
| } |
| |
| /* We rely on power-of-2 blocksizes for bitmasks */ |
| if ((value & (value - 1)) != 0) { |
| error_setg(errp, |
| "Property %s.%s doesn't take value '%" PRId64 "', it's not a power of 2", |
| dev->id ?: "", name, (int64_t)value); |
| return; |
| } |
| |
| *ptr = value; |
| } |
| |
| const PropertyInfo qdev_prop_blocksize = { |
| .name = "uint16", |
| .description = "A power of two between 512 and 32768", |
| .get = get_uint16, |
| .set = set_blocksize, |
| .set_default_value = set_default_value_uint, |
| }; |
| |
| /* --- pci host address --- */ |
| |
| static void get_pci_host_devaddr(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| Property *prop = opaque; |
| PCIHostDeviceAddress *addr = qdev_get_prop_ptr(dev, prop); |
| char buffer[] = "ffff:ff:ff.f"; |
| char *p = buffer; |
| int rc = 0; |
| |
| /* |
| * Catch "invalid" device reference from vfio-pci and allow the |
| * default buffer representing the non-existent device to be used. |
| */ |
| if (~addr->domain || ~addr->bus || ~addr->slot || ~addr->function) { |
| rc = snprintf(buffer, sizeof(buffer), "%04x:%02x:%02x.%0d", |
| addr->domain, addr->bus, addr->slot, addr->function); |
| assert(rc == sizeof(buffer) - 1); |
| } |
| |
| visit_type_str(v, name, &p, errp); |
| } |
| |
| /* |
| * Parse [<domain>:]<bus>:<slot>.<func> |
| * if <domain> is not supplied, it's assumed to be 0. |
| */ |
| static void set_pci_host_devaddr(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| Property *prop = opaque; |
| PCIHostDeviceAddress *addr = qdev_get_prop_ptr(dev, prop); |
| Error *local_err = NULL; |
| char *str, *p; |
| char *e; |
| unsigned long val; |
| unsigned long dom = 0, bus = 0; |
| unsigned int slot = 0, func = 0; |
| |
| if (dev->realized) { |
| qdev_prop_set_after_realize(dev, name, errp); |
| return; |
| } |
| |
| visit_type_str(v, name, &str, &local_err); |
| if (local_err) { |
| error_propagate(errp, local_err); |
| return; |
| } |
| |
| p = str; |
| val = strtoul(p, &e, 16); |
| if (e == p || *e != ':') { |
| goto inval; |
| } |
| bus = val; |
| |
| p = e + 1; |
| val = strtoul(p, &e, 16); |
| if (e == p) { |
| goto inval; |
| } |
| if (*e == ':') { |
| dom = bus; |
| bus = val; |
| p = e + 1; |
| val = strtoul(p, &e, 16); |
| if (e == p) { |
| goto inval; |
| } |
| } |
| slot = val; |
| |
| if (*e != '.') { |
| goto inval; |
| } |
| p = e + 1; |
| val = strtoul(p, &e, 10); |
| if (e == p) { |
| goto inval; |
| } |
| func = val; |
| |
| if (dom > 0xffff || bus > 0xff || slot > 0x1f || func > 7) { |
| goto inval; |
| } |
| |
| if (*e) { |
| goto inval; |
| } |
| |
| addr->domain = dom; |
| addr->bus = bus; |
| addr->slot = slot; |
| addr->function = func; |
| |
| g_free(str); |
| return; |
| |
| inval: |
| error_set_from_qdev_prop_error(errp, EINVAL, dev, prop, str); |
| g_free(str); |
| } |
| |
| const PropertyInfo qdev_prop_pci_host_devaddr = { |
| .name = "str", |
| .description = "Address (bus/device/function) of " |
| "the host device, example: 04:10.0", |
| .get = get_pci_host_devaddr, |
| .set = set_pci_host_devaddr, |
| }; |
| |
| /* --- UUID --- */ |
| |
| static void get_uuid(Object *obj, Visitor *v, const char *name, void *opaque, |
| Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| Property *prop = opaque; |
| QemuUUID *uuid = qdev_get_prop_ptr(dev, prop); |
| char buffer[UUID_FMT_LEN + 1]; |
| char *p = buffer; |
| |
| qemu_uuid_unparse(uuid, buffer); |
| |
| visit_type_str(v, name, &p, errp); |
| } |
| |
| #define UUID_VALUE_AUTO "auto" |
| |
| static void set_uuid(Object *obj, Visitor *v, const char *name, void *opaque, |
| Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| Property *prop = opaque; |
| QemuUUID *uuid = qdev_get_prop_ptr(dev, prop); |
| Error *local_err = NULL; |
| char *str; |
| |
| if (dev->realized) { |
| qdev_prop_set_after_realize(dev, name, errp); |
| return; |
| } |
| |
| visit_type_str(v, name, &str, &local_err); |
| if (local_err) { |
| error_propagate(errp, local_err); |
| return; |
| } |
| |
| if (!strcmp(str, UUID_VALUE_AUTO)) { |
| qemu_uuid_generate(uuid); |
| } else if (qemu_uuid_parse(str, uuid) < 0) { |
| error_set_from_qdev_prop_error(errp, EINVAL, dev, prop, str); |
| } |
| g_free(str); |
| } |
| |
| static void set_default_uuid_auto(Object *obj, const Property *prop) |
| { |
| object_property_set_str(obj, UUID_VALUE_AUTO, prop->name, &error_abort); |
| } |
| |
| const PropertyInfo qdev_prop_uuid = { |
| .name = "str", |
| .description = "UUID (aka GUID) or \"" UUID_VALUE_AUTO |
| "\" for random value (default)", |
| .get = get_uuid, |
| .set = set_uuid, |
| .set_default_value = set_default_uuid_auto, |
| }; |
| |
| /* --- support for array properties --- */ |
| |
| /* Used as an opaque for the object properties we add for each |
| * array element. Note that the struct Property must be first |
| * in the struct so that a pointer to this works as the opaque |
| * for the underlying element's property hooks as well as for |
| * our own release callback. |
| */ |
| typedef struct { |
| struct Property prop; |
| char *propname; |
| ObjectPropertyRelease *release; |
| } ArrayElementProperty; |
| |
| /* object property release callback for array element properties: |
| * we call the underlying element's property release hook, and |
| * then free the memory we allocated when we added the property. |
| */ |
| static void array_element_release(Object *obj, const char *name, void *opaque) |
| { |
| ArrayElementProperty *p = opaque; |
| if (p->release) { |
| p->release(obj, name, opaque); |
| } |
| g_free(p->propname); |
| g_free(p); |
| } |
| |
| static void set_prop_arraylen(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| /* Setter for the property which defines the length of a |
| * variable-sized property array. As well as actually setting the |
| * array-length field in the device struct, we have to create the |
| * array itself and dynamically add the corresponding properties. |
| */ |
| DeviceState *dev = DEVICE(obj); |
| Property *prop = opaque; |
| uint32_t *alenptr = qdev_get_prop_ptr(dev, prop); |
| void **arrayptr = (void *)dev + prop->arrayoffset; |
| Error *local_err = NULL; |
| void *eltptr; |
| const char *arrayname; |
| int i; |
| |
| if (dev->realized) { |
| qdev_prop_set_after_realize(dev, name, errp); |
| return; |
| } |
| if (*alenptr) { |
| error_setg(errp, "array size property %s may not be set more than once", |
| name); |
| return; |
| } |
| visit_type_uint32(v, name, alenptr, &local_err); |
| if (local_err) { |
| error_propagate(errp, local_err); |
| return; |
| } |
| if (!*alenptr) { |
| return; |
| } |
| |
| /* DEFINE_PROP_ARRAY guarantees that name should start with this prefix; |
| * strip it off so we can get the name of the array itself. |
| */ |
| assert(strncmp(name, PROP_ARRAY_LEN_PREFIX, |
| strlen(PROP_ARRAY_LEN_PREFIX)) == 0); |
| arrayname = name + strlen(PROP_ARRAY_LEN_PREFIX); |
| |
| /* Note that it is the responsibility of the individual device's deinit |
| * to free the array proper. |
| */ |
| *arrayptr = eltptr = g_malloc0(*alenptr * prop->arrayfieldsize); |
| for (i = 0; i < *alenptr; i++, eltptr += prop->arrayfieldsize) { |
| char *propname = g_strdup_printf("%s[%d]", arrayname, i); |
| ArrayElementProperty *arrayprop = g_new0(ArrayElementProperty, 1); |
| arrayprop->release = prop->arrayinfo->release; |
| arrayprop->propname = propname; |
| arrayprop->prop.info = prop->arrayinfo; |
| arrayprop->prop.name = propname; |
| /* This ugly piece of pointer arithmetic sets up the offset so |
| * that when the underlying get/set hooks call qdev_get_prop_ptr |
| * they get the right answer despite the array element not actually |
| * being inside the device struct. |
| */ |
| arrayprop->prop.offset = eltptr - (void *)dev; |
| assert(qdev_get_prop_ptr(dev, &arrayprop->prop) == eltptr); |
| object_property_add(obj, propname, |
| arrayprop->prop.info->name, |
| arrayprop->prop.info->get, |
| arrayprop->prop.info->set, |
| array_element_release, |
| arrayprop, &local_err); |
| if (local_err) { |
| error_propagate(errp, local_err); |
| return; |
| } |
| } |
| } |
| |
| const PropertyInfo qdev_prop_arraylen = { |
| .name = "uint32", |
| .get = get_uint32, |
| .set = set_prop_arraylen, |
| .set_default_value = set_default_value_uint, |
| }; |
| |
| /* --- public helpers --- */ |
| |
| static Property *qdev_prop_walk(Property *props, const char *name) |
| { |
| if (!props) { |
| return NULL; |
| } |
| while (props->name) { |
| if (strcmp(props->name, name) == 0) { |
| return props; |
| } |
| props++; |
| } |
| return NULL; |
| } |
| |
| static Property *qdev_prop_find(DeviceState *dev, const char *name) |
| { |
| ObjectClass *class; |
| Property *prop; |
| |
| /* device properties */ |
| class = object_get_class(OBJECT(dev)); |
| do { |
| prop = qdev_prop_walk(DEVICE_CLASS(class)->props, name); |
| if (prop) { |
| return prop; |
| } |
| class = object_class_get_parent(class); |
| } while (class != object_class_by_name(TYPE_DEVICE)); |
| |
| return NULL; |
| } |
| |
| void error_set_from_qdev_prop_error(Error **errp, int ret, DeviceState *dev, |
| Property *prop, const char *value) |
| { |
| switch (ret) { |
| case -EEXIST: |
| error_setg(errp, "Property '%s.%s' can't take value '%s', it's in use", |
| object_get_typename(OBJECT(dev)), prop->name, value); |
| break; |
| default: |
| case -EINVAL: |
| error_setg(errp, QERR_PROPERTY_VALUE_BAD, |
| object_get_typename(OBJECT(dev)), prop->name, value); |
| break; |
| case -ENOENT: |
| error_setg(errp, "Property '%s.%s' can't find value '%s'", |
| object_get_typename(OBJECT(dev)), prop->name, value); |
| break; |
| case 0: |
| break; |
| } |
| } |
| |
| void qdev_prop_set_bit(DeviceState *dev, const char *name, bool value) |
| { |
| object_property_set_bool(OBJECT(dev), value, name, &error_abort); |
| } |
| |
| void qdev_prop_set_uint8(DeviceState *dev, const char *name, uint8_t value) |
| { |
| object_property_set_int(OBJECT(dev), value, name, &error_abort); |
| } |
| |
| void qdev_prop_set_uint16(DeviceState *dev, const char *name, uint16_t value) |
| { |
| object_property_set_int(OBJECT(dev), value, name, &error_abort); |
| } |
| |
| void qdev_prop_set_uint32(DeviceState *dev, const char *name, uint32_t value) |
| { |
| object_property_set_int(OBJECT(dev), value, name, &error_abort); |
| } |
| |
| void qdev_prop_set_int32(DeviceState *dev, const char *name, int32_t value) |
| { |
| object_property_set_int(OBJECT(dev), value, name, &error_abort); |
| } |
| |
| void qdev_prop_set_uint64(DeviceState *dev, const char *name, uint64_t value) |
| { |
| object_property_set_int(OBJECT(dev), value, name, &error_abort); |
| } |
| |
| void qdev_prop_set_string(DeviceState *dev, const char *name, const char *value) |
| { |
| object_property_set_str(OBJECT(dev), value, name, &error_abort); |
| } |
| |
| void qdev_prop_set_macaddr(DeviceState *dev, const char *name, |
| const uint8_t *value) |
| { |
| char str[2 * 6 + 5 + 1]; |
| snprintf(str, sizeof(str), "%02x:%02x:%02x:%02x:%02x:%02x", |
| value[0], value[1], value[2], value[3], value[4], value[5]); |
| |
| object_property_set_str(OBJECT(dev), str, name, &error_abort); |
| } |
| |
| void qdev_prop_set_enum(DeviceState *dev, const char *name, int value) |
| { |
| Property *prop; |
| |
| prop = qdev_prop_find(dev, name); |
| object_property_set_str(OBJECT(dev), |
| qapi_enum_lookup(prop->info->enum_table, value), |
| name, &error_abort); |
| } |
| |
| void qdev_prop_set_ptr(DeviceState *dev, const char *name, void *value) |
| { |
| Property *prop; |
| void **ptr; |
| |
| prop = qdev_prop_find(dev, name); |
| assert(prop && prop->info == &qdev_prop_ptr); |
| ptr = qdev_get_prop_ptr(dev, prop); |
| *ptr = value; |
| } |
| |
| static GPtrArray *global_props(void) |
| { |
| static GPtrArray *gp; |
| |
| if (!gp) { |
| gp = g_ptr_array_new(); |
| } |
| |
| return gp; |
| } |
| |
| void qdev_prop_register_global(GlobalProperty *prop) |
| { |
| g_ptr_array_add(global_props(), prop); |
| } |
| |
| int qdev_prop_check_globals(void) |
| { |
| int i, ret = 0; |
| |
| for (i = 0; i < global_props()->len; i++) { |
| GlobalProperty *prop; |
| ObjectClass *oc; |
| DeviceClass *dc; |
| |
| prop = g_ptr_array_index(global_props(), i); |
| if (prop->used) { |
| continue; |
| } |
| oc = object_class_by_name(prop->driver); |
| oc = object_class_dynamic_cast(oc, TYPE_DEVICE); |
| if (!oc) { |
| warn_report("global %s.%s has invalid class name", |
| prop->driver, prop->property); |
| ret = 1; |
| continue; |
| } |
| dc = DEVICE_CLASS(oc); |
| if (!dc->hotpluggable && !prop->used) { |
| warn_report("global %s.%s=%s not used", |
| prop->driver, prop->property, prop->value); |
| ret = 1; |
| continue; |
| } |
| } |
| return ret; |
| } |
| |
| void qdev_prop_set_globals(DeviceState *dev) |
| { |
| int i; |
| |
| for (i = 0; i < global_props()->len; i++) { |
| GlobalProperty *prop; |
| Error *err = NULL; |
| |
| prop = g_ptr_array_index(global_props(), i); |
| if (object_dynamic_cast(OBJECT(dev), prop->driver) == NULL) { |
| continue; |
| } |
| prop->used = true; |
| object_property_parse(OBJECT(dev), prop->value, prop->property, &err); |
| if (err != NULL) { |
| error_prepend(&err, "can't apply global %s.%s=%s: ", |
| prop->driver, prop->property, prop->value); |
| if (!dev->hotplugged) { |
| error_propagate(&error_fatal, err); |
| } else { |
| warn_report_err(err); |
| } |
| } |
| } |
| } |
| |
| /* --- 64bit unsigned int 'size' type --- */ |
| |
| static void get_size(Object *obj, Visitor *v, const char *name, void *opaque, |
| Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| Property *prop = opaque; |
| uint64_t *ptr = qdev_get_prop_ptr(dev, prop); |
| |
| visit_type_size(v, name, ptr, errp); |
| } |
| |
| static void set_size(Object *obj, Visitor *v, const char *name, void *opaque, |
| Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| Property *prop = opaque; |
| uint64_t *ptr = qdev_get_prop_ptr(dev, prop); |
| |
| visit_type_size(v, name, ptr, errp); |
| } |
| |
| const PropertyInfo qdev_prop_size = { |
| .name = "size", |
| .get = get_size, |
| .set = set_size, |
| .set_default_value = set_default_value_uint, |
| }; |
| |
| /* --- object link property --- */ |
| |
| static void create_link_property(Object *obj, Property *prop, Error **errp) |
| { |
| Object **child = qdev_get_prop_ptr(DEVICE(obj), prop); |
| |
| object_property_add_link(obj, prop->name, prop->link_type, |
| child, |
| qdev_prop_allow_set_link_before_realize, |
| OBJ_PROP_LINK_STRONG, |
| errp); |
| } |
| |
| const PropertyInfo qdev_prop_link = { |
| .name = "link", |
| .create = create_link_property, |
| }; |
| |
| /* --- OffAutoPCIBAR off/auto/bar0/bar1/bar2/bar3/bar4/bar5 --- */ |
| |
| const PropertyInfo qdev_prop_off_auto_pcibar = { |
| .name = "OffAutoPCIBAR", |
| .description = "off/auto/bar0/bar1/bar2/bar3/bar4/bar5", |
| .enum_table = &OffAutoPCIBAR_lookup, |
| .get = get_enum, |
| .set = set_enum, |
| .set_default_value = set_default_value_enum, |
| }; |
| |
| /* --- PCIELinkSpeed 2_5/5/8/16 -- */ |
| |
| static void get_prop_pcielinkspeed(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| Property *prop = opaque; |
| PCIExpLinkSpeed *p = qdev_get_prop_ptr(dev, prop); |
| int speed; |
| |
| switch (*p) { |
| case QEMU_PCI_EXP_LNK_2_5GT: |
| speed = PCIE_LINK_SPEED_2_5; |
| break; |
| case QEMU_PCI_EXP_LNK_5GT: |
| speed = PCIE_LINK_SPEED_5; |
| break; |
| case QEMU_PCI_EXP_LNK_8GT: |
| speed = PCIE_LINK_SPEED_8; |
| break; |
| case QEMU_PCI_EXP_LNK_16GT: |
| speed = PCIE_LINK_SPEED_16; |
| break; |
| default: |
| /* Unreachable */ |
| abort(); |
| } |
| |
| visit_type_enum(v, prop->name, &speed, prop->info->enum_table, errp); |
| } |
| |
| static void set_prop_pcielinkspeed(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| Property *prop = opaque; |
| PCIExpLinkSpeed *p = qdev_get_prop_ptr(dev, prop); |
| int speed; |
| Error *local_err = NULL; |
| |
| if (dev->realized) { |
| qdev_prop_set_after_realize(dev, name, errp); |
| return; |
| } |
| |
| visit_type_enum(v, prop->name, &speed, prop->info->enum_table, &local_err); |
| if (local_err) { |
| error_propagate(errp, local_err); |
| return; |
| } |
| |
| switch (speed) { |
| case PCIE_LINK_SPEED_2_5: |
| *p = QEMU_PCI_EXP_LNK_2_5GT; |
| break; |
| case PCIE_LINK_SPEED_5: |
| *p = QEMU_PCI_EXP_LNK_5GT; |
| break; |
| case PCIE_LINK_SPEED_8: |
| *p = QEMU_PCI_EXP_LNK_8GT; |
| break; |
| case PCIE_LINK_SPEED_16: |
| *p = QEMU_PCI_EXP_LNK_16GT; |
| break; |
| default: |
| /* Unreachable */ |
| abort(); |
| } |
| } |
| |
| const PropertyInfo qdev_prop_pcie_link_speed = { |
| .name = "PCIELinkSpeed", |
| .description = "2_5/5/8/16", |
| .enum_table = &PCIELinkSpeed_lookup, |
| .get = get_prop_pcielinkspeed, |
| .set = set_prop_pcielinkspeed, |
| .set_default_value = set_default_value_enum, |
| }; |
| |
| /* --- PCIELinkWidth 1/2/4/8/12/16/32 -- */ |
| |
| static void get_prop_pcielinkwidth(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| Property *prop = opaque; |
| PCIExpLinkWidth *p = qdev_get_prop_ptr(dev, prop); |
| int width; |
| |
| switch (*p) { |
| case QEMU_PCI_EXP_LNK_X1: |
| width = PCIE_LINK_WIDTH_1; |
| break; |
| case QEMU_PCI_EXP_LNK_X2: |
| width = PCIE_LINK_WIDTH_2; |
| break; |
| case QEMU_PCI_EXP_LNK_X4: |
| width = PCIE_LINK_WIDTH_4; |
| break; |
| case QEMU_PCI_EXP_LNK_X8: |
| width = PCIE_LINK_WIDTH_8; |
| break; |
| case QEMU_PCI_EXP_LNK_X12: |
| width = PCIE_LINK_WIDTH_12; |
| break; |
| case QEMU_PCI_EXP_LNK_X16: |
| width = PCIE_LINK_WIDTH_16; |
| break; |
| case QEMU_PCI_EXP_LNK_X32: |
| width = PCIE_LINK_WIDTH_32; |
| break; |
| default: |
| /* Unreachable */ |
| abort(); |
| } |
| |
| visit_type_enum(v, prop->name, &width, prop->info->enum_table, errp); |
| } |
| |
| static void set_prop_pcielinkwidth(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| DeviceState *dev = DEVICE(obj); |
| Property *prop = opaque; |
| PCIExpLinkWidth *p = qdev_get_prop_ptr(dev, prop); |
| int width; |
| Error *local_err = NULL; |
| |
| if (dev->realized) { |
| qdev_prop_set_after_realize(dev, name, errp); |
| return; |
| } |
| |
| visit_type_enum(v, prop->name, &width, prop->info->enum_table, &local_err); |
| if (local_err) { |
| error_propagate(errp, local_err); |
| return; |
| } |
| |
| switch (width) { |
| case PCIE_LINK_WIDTH_1: |
| *p = QEMU_PCI_EXP_LNK_X1; |
| break; |
| case PCIE_LINK_WIDTH_2: |
| *p = QEMU_PCI_EXP_LNK_X2; |
| break; |
| case PCIE_LINK_WIDTH_4: |
| *p = QEMU_PCI_EXP_LNK_X4; |
| break; |
| case PCIE_LINK_WIDTH_8: |
| *p = QEMU_PCI_EXP_LNK_X8; |
| break; |
| case PCIE_LINK_WIDTH_12: |
| *p = QEMU_PCI_EXP_LNK_X12; |
| break; |
| case PCIE_LINK_WIDTH_16: |
| *p = QEMU_PCI_EXP_LNK_X16; |
| break; |
| case PCIE_LINK_WIDTH_32: |
| *p = QEMU_PCI_EXP_LNK_X32; |
| break; |
| default: |
| /* Unreachable */ |
| abort(); |
| } |
| } |
| |
| const PropertyInfo qdev_prop_pcie_link_width = { |
| .name = "PCIELinkWidth", |
| .description = "1/2/4/8/12/16/32", |
| .enum_table = &PCIELinkWidth_lookup, |
| .get = get_prop_pcielinkwidth, |
| .set = set_prop_pcielinkwidth, |
| .set_default_value = set_default_value_enum, |
| }; |