/*
 * QEMU live migration
 *
 * Copyright IBM, Corp. 2008
 *
 * Authors:
 *  Anthony Liguori   <aliguori@us.ibm.com>
 *
 * This work is licensed under the terms of the GNU GPL, version 2.  See
 * the COPYING file in the top-level directory.
 *
 * Contributions after 2012-01-13 are licensed under the terms of the
 * GNU GPL, version 2 or (at your option) any later version.
 */

#include "qemu/osdep.h"
#include "qemu/ctype.h"
#include "qemu/error-report.h"
#include "qemu/main-loop.h"
#include "migration/blocker.h"
#include "exec.h"
#include "file.h"
#include "system/runstate.h"
#include "system/system.h"
#include "system/cpu-throttle.h"
#include "ram.h"
#include "migration/cpr.h"
#include "migration/global_state.h"
#include "migration/misc.h"
#include "migration.h"
#include "migration-stats.h"
#include "savevm.h"
#include "qemu-file.h"
#include "channel.h"
#include "migration/vmstate.h"
#include "block/block.h"
#include "qapi/error.h"
#include "qapi/clone-visitor.h"
#include "qapi/qapi-visit-migration.h"
#include "qapi/qapi-visit-sockets.h"
#include "qapi/qapi-commands-migration.h"
#include "qapi/qapi-events-migration.h"
#include "qapi/qmp/qerror.h"
#include "qobject/qnull.h"
#include "qemu/rcu.h"
#include "postcopy-ram.h"
#include "qemu/thread.h"
#include "trace.h"
#include "exec/target_page.h"
#include "io/channel-buffer.h"
#include "io/channel-tls.h"
#include "migration/colo.h"
#include "hw/core/boards.h"
#include "monitor/monitor.h"
#include "net/announce.h"
#include "qemu/queue.h"
#include "multifd.h"
#include "qemu/yank.h"
#include "system/cpus.h"
#include "yank_functions.h"
#include "system/qtest.h"
#include "options.h"
#include "system/dirtylimit.h"
#include "qemu/sockets.h"
#include "system/kvm.h"

#define NOTIFIER_ELEM_INIT(array, elem)    \
    [elem] = NOTIFIER_WITH_RETURN_LIST_INITIALIZER((array)[elem])

#define INMIGRATE_DEFAULT_EXIT_ON_ERROR true

static GSList *migration_state_notifiers[MIG_MODE__MAX];

/* Messages sent on the return path from destination to source */
enum mig_rp_message_type {
    MIG_RP_MSG_INVALID = 0,  /* Must be 0 */
    MIG_RP_MSG_SHUT,         /* sibling will not send any more RP messages */
    MIG_RP_MSG_PONG,         /* Response to a PING; data (seq: be32 ) */

    MIG_RP_MSG_REQ_PAGES_ID, /* data (start: be64, len: be32, id: string) */
    MIG_RP_MSG_REQ_PAGES,    /* data (start: be64, len: be32) */
    MIG_RP_MSG_RECV_BITMAP,  /* send recved_bitmap back to source */
    MIG_RP_MSG_RESUME_ACK,   /* tell source that we are ready to resume */
    MIG_RP_MSG_SWITCHOVER_ACK, /* Tell source it's OK to do switchover */

    MIG_RP_MSG_MAX
};

/* When we add fault tolerance, we could have several
   migrations at once.  For now we don't need to add
   dynamic creation of migration */

static MigrationState *current_migration;
static MigrationIncomingState *current_incoming;

static GSList *migration_blockers[MIG_MODE__MAX];

static bool migration_object_check(MigrationState *ms, Error **errp);
static bool migration_switchover_start(MigrationState *s, Error **errp);
static bool close_return_path_on_source(MigrationState *s);
static void migration_completion_end(MigrationState *s);

static void migration_downtime_start(MigrationState *s)
{
    trace_vmstate_downtime_checkpoint("src-downtime-start");
    s->downtime_start = qemu_clock_get_ms(QEMU_CLOCK_REALTIME);
}

/*
 * This is unfortunate: incoming migration actually needs the outgoing
 * migration state (MigrationState) to be there too, e.g. to query
 * capabilities, parameters, using locks, setup errors, etc.
 *
 * NOTE: when calling this, making sure current_migration exists and not
 * been freed yet!  Otherwise trying to access the refcount is already
 * an use-after-free itself..
 *
 * TODO: Move shared part of incoming / outgoing out into separate object.
 * Then this is not needed.
 */
static void migrate_incoming_ref_outgoing_state(void)
{
    object_ref(migrate_get_current());
}
static void migrate_incoming_unref_outgoing_state(void)
{
    object_unref(migrate_get_current());
}

static void migration_downtime_end(MigrationState *s)
{
    int64_t now = qemu_clock_get_ms(QEMU_CLOCK_REALTIME);

    /*
     * If downtime already set, should mean that postcopy already set it,
     * then that should be the real downtime already.
     */
    if (!s->downtime) {
        s->downtime = now - s->downtime_start;
        trace_vmstate_downtime_checkpoint("src-downtime-end");
    }
}

static void precopy_notify_complete(void)
{
    Error *local_err = NULL;

    if (precopy_notify(PRECOPY_NOTIFY_COMPLETE, &local_err)) {
        error_report_err(local_err);
    }

    trace_migration_precopy_complete();
}

static bool migration_needs_multiple_sockets(void)
{
    return migrate_multifd() || migrate_postcopy_preempt();
}

static RunState migration_get_target_runstate(void)
{
    /*
     * When the global state is not migrated, it means we don't know the
     * runstate of the src QEMU.  We don't have much choice but assuming
     * the VM is running.  NOTE: this is pretty rare case, so far only Xen
     * uses it.
     */
    if (!global_state_received()) {
        return RUN_STATE_RUNNING;
    }

    return global_state_get_runstate();
}

static bool transport_supports_multi_channels(MigrationAddress *addr)
{
    if (addr->transport == MIGRATION_ADDRESS_TYPE_SOCKET) {
        SocketAddress *saddr = &addr->u.socket;

        return (saddr->type == SOCKET_ADDRESS_TYPE_INET ||
                saddr->type == SOCKET_ADDRESS_TYPE_UNIX ||
                saddr->type == SOCKET_ADDRESS_TYPE_VSOCK);
    } else if (addr->transport == MIGRATION_ADDRESS_TYPE_FILE) {
        return migrate_mapped_ram();
    } else {
        return false;
    }
}

static bool migration_needs_seekable_channel(void)
{
    return migrate_mapped_ram();
}

static bool migration_needs_extra_fds(void)
{
    /*
     * When doing direct-io, multifd requires two different,
     * non-duplicated file descriptors so we can use one of them for
     * unaligned IO.
     */
    return migrate_multifd() && migrate_direct_io();
}

static bool transport_supports_seeking(MigrationAddress *addr)
{
    if (addr->transport == MIGRATION_ADDRESS_TYPE_FILE) {
        return true;
    }

    return false;
}

static bool transport_supports_extra_fds(MigrationAddress *addr)
{
    /* file: works because QEMU can open it multiple times */
    return addr->transport == MIGRATION_ADDRESS_TYPE_FILE;
}

static bool
migration_channels_and_transport_compatible(MigrationAddress *addr,
                                            Error **errp)
{
    if (migration_needs_seekable_channel() &&
        !transport_supports_seeking(addr)) {
        error_setg(errp, "Migration requires seekable transport (e.g. file)");
        return false;
    }

    if (migration_needs_multiple_sockets() &&
        !transport_supports_multi_channels(addr)) {
        error_setg(errp, "Migration requires multi-channel URIs (e.g. tcp)");
        return false;
    }

    if (migration_needs_extra_fds() &&
        !transport_supports_extra_fds(addr)) {
        error_setg(errp,
                   "Migration requires a transport that allows for extra fds (e.g. file)");
        return false;
    }

    if (migrate_mode() == MIG_MODE_CPR_TRANSFER &&
        addr->transport == MIGRATION_ADDRESS_TYPE_FILE) {
        error_setg(errp, "Migration requires streamable transport (eg unix)");
        return false;
    }

    return true;
}

static bool
migration_capabilities_and_transport_compatible(MigrationAddress *addr,
                                                Error **errp)
{
    if (addr->transport == MIGRATION_ADDRESS_TYPE_RDMA) {
        return migrate_rdma_caps_check(migrate_get_current()->capabilities,
                                       errp);
    }

    return true;
}

static bool migration_transport_compatible(MigrationAddress *addr, Error **errp)
{
    return migration_channels_and_transport_compatible(addr, errp) &&
           migration_capabilities_and_transport_compatible(addr, errp);
}

static gint page_request_addr_cmp(gconstpointer ap, gconstpointer bp)
{
    uintptr_t a = (uintptr_t) ap, b = (uintptr_t) bp;

    return (a > b) - (a < b);
}

static int migration_stop_vm(MigrationState *s, RunState state)
{
    int ret;

    migration_downtime_start(s);

    s->vm_old_state = runstate_get();
    global_state_store();

    ret = vm_stop_force_state(state);

    trace_vmstate_downtime_checkpoint("src-vm-stopped");
    trace_migration_completion_vm_stop(ret);

    return ret;
}

void migration_object_init(void)
{
    /* This can only be called once. */
    assert(!current_migration);
    current_migration = MIGRATION_OBJ(object_new(TYPE_MIGRATION));

    /*
     * Init the migrate incoming object as well no matter whether
     * we'll use it or not.
     */
    assert(!current_incoming);
    current_incoming = g_new0(MigrationIncomingState, 1);
    current_incoming->state = MIGRATION_STATUS_NONE;
    current_incoming->postcopy_remote_fds =
        g_array_new(FALSE, TRUE, sizeof(struct PostCopyFD));
    qemu_mutex_init(&current_incoming->rp_mutex);
    qemu_mutex_init(&current_incoming->postcopy_prio_thread_mutex);
    qemu_event_init(&current_incoming->main_thread_load_event, false);
    qemu_sem_init(&current_incoming->postcopy_pause_sem_dst, 0);
    qemu_sem_init(&current_incoming->postcopy_pause_sem_fault, 0);
    qemu_sem_init(&current_incoming->postcopy_pause_sem_fast_load, 0);
    qemu_sem_init(&current_incoming->postcopy_qemufile_dst_done, 0);

    qemu_mutex_init(&current_incoming->page_request_mutex);
    qemu_cond_init(&current_incoming->page_request_cond);
    current_incoming->page_requested = g_tree_new(page_request_addr_cmp);

    current_incoming->exit_on_error = INMIGRATE_DEFAULT_EXIT_ON_ERROR;

    migration_object_check(current_migration, &error_fatal);

    ram_mig_init();
    dirty_bitmap_mig_init();
    cpr_exec_init();

    /* Initialize cpu throttle timers */
    cpu_throttle_init();
}

typedef struct {
    QEMUBH *bh;
    QEMUBHFunc *cb;
    void *opaque;
} MigrationBH;

static void migration_bh_dispatch_bh(void *opaque)
{
    MigrationState *s = migrate_get_current();
    MigrationBH *migbh = opaque;

    /* cleanup this BH */
    qemu_bh_delete(migbh->bh);
    migbh->bh = NULL;

    /* dispatch the other one */
    migbh->cb(migbh->opaque);
    object_unref(OBJECT(s));

    g_free(migbh);
}

void migration_bh_schedule(QEMUBHFunc *cb, void *opaque)
{
    MigrationState *s = migrate_get_current();
    MigrationBH *migbh = g_new0(MigrationBH, 1);
    QEMUBH *bh = qemu_bh_new(migration_bh_dispatch_bh, migbh);

    /* Store these to dispatch when the BH runs */
    migbh->bh = bh;
    migbh->cb = cb;
    migbh->opaque = opaque;

    /*
     * Ref the state for bh, because it may be called when
     * there're already no other refs
     */
    object_ref(OBJECT(s));
    qemu_bh_schedule(bh);
}

void migration_shutdown(void)
{
    /*
     * When the QEMU main thread exit, the COLO thread
     * may wait a semaphore. So, we should wakeup the
     * COLO thread before migration shutdown.
     */
    colo_shutdown();
    /*
     * Cancel the current migration - that will (eventually)
     * stop the migration using this structure
     */
    migration_cancel();
    object_unref(OBJECT(current_migration));

    /*
     * Cancel outgoing migration of dirty bitmaps. It should
     * at least unref used block nodes.
     */
    dirty_bitmap_mig_cancel_outgoing();

    /*
     * Cancel incoming migration of dirty bitmaps. Dirty bitmaps
     * are non-critical data, and their loss never considered as
     * something serious.
     */
    dirty_bitmap_mig_cancel_incoming();
}

/* For outgoing */
MigrationState *migrate_get_current(void)
{
    /* This can only be called after the object created. */
    assert(current_migration);
    return current_migration;
}

MigrationIncomingState *migration_incoming_get_current(void)
{
    assert(current_incoming);
    return current_incoming;
}

void migration_incoming_transport_cleanup(MigrationIncomingState *mis)
{
    if (mis->socket_address_list) {
        qapi_free_SocketAddressList(mis->socket_address_list);
        mis->socket_address_list = NULL;
    }

    if (mis->transport_cleanup) {
        mis->transport_cleanup(mis->transport_data);
        mis->transport_data = mis->transport_cleanup = NULL;
    }
}

void migration_incoming_state_destroy(void)
{
    MigrationIncomingState *mis = migration_incoming_get_current();
    PostcopyState ps = postcopy_state_get();

    multifd_recv_cleanup();

    if (ps != POSTCOPY_INCOMING_NONE) {
        postcopy_incoming_cleanup(mis);
    }

    /*
     * RAM state cleanup needs to happen after multifd cleanup, because
     * multifd threads can use some of its states (receivedmap).
     * The VFIO load_cleanup() implementation is BQL-sensitive. It requires
     * BQL must NOT be taken when recycling load threads, so that it won't
     * block the load threads from making progress on address space
     * modification operations.
     *
     * To make it work, we could try to not take BQL for all load_cleanup(),
     * or conditionally unlock BQL only if bql_locked() in VFIO.
     *
     * Since most existing call sites take BQL for load_cleanup(), make
     * it simple by taking BQL always as the rule, so that VFIO can unlock
     * BQL and retake unconditionally.
     */
    assert(bql_locked());
    qemu_loadvm_state_cleanup(mis);

    if (mis->to_src_file) {
        /* Tell source that we are done */
        migrate_send_rp_shut(mis, qemu_file_get_error(mis->from_src_file) != 0);
        qemu_fclose(mis->to_src_file);
        mis->to_src_file = NULL;
    }

    if (mis->from_src_file) {
        migration_ioc_unregister_yank_from_file(mis->from_src_file);
        qemu_fclose(mis->from_src_file);
        mis->from_src_file = NULL;
    }
    if (mis->postcopy_remote_fds) {
        g_array_free(mis->postcopy_remote_fds, TRUE);
        mis->postcopy_remote_fds = NULL;
    }

    migration_incoming_transport_cleanup(mis);
    qemu_event_reset(&mis->main_thread_load_event);

    if (mis->page_requested) {
        g_tree_destroy(mis->page_requested);
        mis->page_requested = NULL;
    }

    if (mis->postcopy_qemufile_dst) {
        migration_ioc_unregister_yank_from_file(mis->postcopy_qemufile_dst);
        qemu_fclose(mis->postcopy_qemufile_dst);
        mis->postcopy_qemufile_dst = NULL;
    }

    cpr_set_incoming_mode(MIG_MODE_NONE);
    yank_unregister_instance(MIGRATION_YANK_INSTANCE);
}

static void migrate_generate_event(MigrationStatus new_state)
{
    if (migrate_events()) {
        qapi_event_send_migration(new_state);
    }
}

/*
 * Send a message on the return channel back to the source
 * of the migration.
 */
static int migrate_send_rp_message(MigrationIncomingState *mis,
                                   enum mig_rp_message_type message_type,
                                   uint16_t len, void *data)
{
    int ret = 0;

    trace_migrate_send_rp_message((int)message_type, len);
    QEMU_LOCK_GUARD(&mis->rp_mutex);

    /*
     * It's possible that the file handle got lost due to network
     * failures.
     */
    if (!mis->to_src_file) {
        ret = -EIO;
        return ret;
    }

    qemu_put_be16(mis->to_src_file, (unsigned int)message_type);
    qemu_put_be16(mis->to_src_file, len);
    qemu_put_buffer(mis->to_src_file, data, len);
    return qemu_fflush(mis->to_src_file);
}

/* Request one page from the source VM at the given start address.
 *   rb: the RAMBlock to request the page in
 *   Start: Address offset within the RB
 *   Len: Length in bytes required - must be a multiple of pagesize
 */
int migrate_send_rp_message_req_pages(MigrationIncomingState *mis,
                                      RAMBlock *rb, ram_addr_t start)
{
    uint8_t bufc[12 + 1 + 255]; /* start (8), len (4), rbname up to 256 */
    size_t msglen = 12; /* start + len */
    size_t len = qemu_ram_pagesize(rb);
    enum mig_rp_message_type msg_type;
    const char *rbname;
    int rbname_len;

    *(uint64_t *)bufc = cpu_to_be64((uint64_t)start);
    *(uint32_t *)(bufc + 8) = cpu_to_be32((uint32_t)len);

    /*
     * We maintain the last ramblock that we requested for page.  Note that we
     * don't need locking because this function will only be called within the
     * postcopy ram fault thread.
     */
    if (rb != mis->last_rb) {
        mis->last_rb = rb;

        rbname = qemu_ram_get_idstr(rb);
        rbname_len = strlen(rbname);

        assert(rbname_len < 256);

        bufc[msglen++] = rbname_len;
        memcpy(bufc + msglen, rbname, rbname_len);
        msglen += rbname_len;
        msg_type = MIG_RP_MSG_REQ_PAGES_ID;
    } else {
        msg_type = MIG_RP_MSG_REQ_PAGES;
    }

    return migrate_send_rp_message(mis, msg_type, msglen, bufc);
}

int migrate_send_rp_req_pages(MigrationIncomingState *mis,
                              RAMBlock *rb, ram_addr_t start, uint64_t haddr,
                              uint32_t tid)
{
    void *aligned = (void *)(uintptr_t)ROUND_DOWN(haddr, qemu_ram_pagesize(rb));
    bool received = false;

    WITH_QEMU_LOCK_GUARD(&mis->page_request_mutex) {
        received = ramblock_recv_bitmap_test_byte_offset(rb, start);
        if (!received) {
            if (!g_tree_lookup(mis->page_requested, aligned)) {
                /*
                 * The page has not been received, and it's not yet in the
                 * page request list.  Queue it.  Set the value of element
                 * to 1, so that things like g_tree_lookup() will return
                 * TRUE (1) when found.
                 */
                g_tree_insert(mis->page_requested, aligned, (gpointer)1);
                qatomic_inc(&mis->page_requested_count);
                trace_postcopy_page_req_add(aligned, mis->page_requested_count);
            }
            mark_postcopy_blocktime_begin(haddr, tid, rb);
        }
    }

    /*
     * If the page is there, skip sending the message.  We don't even need the
     * lock because as long as the page arrived, it'll be there forever.
     */
    if (received) {
        return 0;
    }

    return migrate_send_rp_message_req_pages(mis, rb, start);
}

static bool migration_colo_enabled;
bool migration_incoming_colo_enabled(void)
{
    return migration_colo_enabled;
}

void migration_incoming_disable_colo(void)
{
    ram_block_discard_disable(false);
    migration_colo_enabled = false;
}

int migration_incoming_enable_colo(Error **errp)
{
#ifndef CONFIG_REPLICATION
    error_setg(errp, "ENABLE_COLO command come in migration stream, but the "
               "replication module is not built in");
    return -ENOTSUP;
#endif

    if (!migrate_colo()) {
        error_setg(errp, "ENABLE_COLO command come in migration stream"
                   ", but x-colo capability is not set");
        return -EINVAL;
    }

    if (ram_block_discard_disable(true)) {
        error_setg(errp, "COLO: cannot disable RAM discard");
        return -EBUSY;
    }
    migration_colo_enabled = true;
    return 0;
}

void migrate_add_address(SocketAddress *address)
{
    MigrationIncomingState *mis = migration_incoming_get_current();

    QAPI_LIST_PREPEND(mis->socket_address_list,
                      QAPI_CLONE(SocketAddress, address));
}

bool migrate_is_uri(const char *uri)
{
    while (*uri && *uri != ':') {
        if (!qemu_isalpha(*uri++)) {
            return false;
        }
    }
    return *uri == ':';
}

static bool
migration_incoming_state_setup(MigrationIncomingState *mis, Error **errp)
{
    MigrationStatus current = mis->state;

    if (current == MIGRATION_STATUS_POSTCOPY_PAUSED) {
        /*
         * Incoming postcopy migration will stay in PAUSED state even if
         * reconnection happened.
         */
        return true;
    }

    if (current != MIGRATION_STATUS_NONE) {
        error_setg(errp, "Illegal migration incoming state: %s",
                   MigrationStatus_str(current));
        return false;
    }

    migrate_set_state(&mis->state, current, MIGRATION_STATUS_SETUP);
    return true;
}

static void qemu_setup_incoming_migration(const char *uri, bool has_channels,
                                          MigrationChannelList *channels,
                                          Error **errp)
{
    g_autoptr(MigrationChannel) main_ch = NULL;
    MigrationIncomingState *mis = migration_incoming_get_current();

    if (!migration_channel_parse_input(uri, channels, &main_ch, NULL, errp)) {
        return;
    }

    /* transport mechanism not suitable for migration? */
    if (!migration_transport_compatible(main_ch->addr, errp)) {
        return;
    }

    if (!migration_incoming_state_setup(mis, errp)) {
        return;
    }

    migration_connect_incoming(main_ch->addr, errp);

    /* Close cpr socket to tell source that we are listening */
    cpr_state_close();
}

static void process_incoming_migration_bh(void *opaque)
{
    MigrationIncomingState *mis = opaque;

    trace_vmstate_downtime_checkpoint("dst-precopy-bh-enter");

    /*
     * This must happen after all error conditions are dealt with and
     * we're sure the VM is going to be running on this host.
     */
    qemu_announce_self(&mis->announce_timer, migrate_announce_params());

    trace_vmstate_downtime_checkpoint("dst-precopy-bh-announced");

    multifd_recv_shutdown();

    dirty_bitmap_mig_before_vm_start();

    if (runstate_is_live(migration_get_target_runstate())) {
        if (autostart) {
            /*
             * Block activation is always delayed until VM starts, either
             * here (which means we need to start the dest VM right now..),
             * or until qmp_cont() later.
             *
             * We used to have cap 'late-block-activate' but now we do this
             * unconditionally, as it has no harm but only benefit.  E.g.,
             * it's not part of migration ABI on the time of disk activation.
             *
             * Make sure all file formats throw away their mutable
             * metadata.  If error, don't restart the VM yet.
             */
            if (migration_block_activate(NULL)) {
                vm_start();
            }
        } else {
            runstate_set(RUN_STATE_PAUSED);
        }
    } else if (migration_incoming_colo_enabled()) {
        migration_incoming_disable_colo();
        vm_start();
    } else {
        runstate_set(global_state_get_runstate());
    }
    trace_vmstate_downtime_checkpoint("dst-precopy-bh-vm-started");
    /*
     * This must happen after any state changes since as soon as an external
     * observer sees this event they might start to prod at the VM assuming
     * it's ready to use.
     */
    migrate_set_state(&mis->state, MIGRATION_STATUS_ACTIVE,
                      MIGRATION_STATUS_COMPLETED);
    migration_incoming_state_destroy();
}

static void coroutine_fn
process_incoming_migration_co(void *opaque)
{
    MigrationState *s = migrate_get_current();
    MigrationIncomingState *mis = migration_incoming_get_current();
    int ret;
    Error *local_err = NULL;

    assert(mis->from_src_file);

    mis->largest_page_size = qemu_ram_pagesize_largest();
    postcopy_state_set(POSTCOPY_INCOMING_NONE);
    migrate_set_state(&mis->state, MIGRATION_STATUS_SETUP,
                      MIGRATION_STATUS_ACTIVE);

    mis->loadvm_co = qemu_coroutine_self();
    ret = qemu_loadvm_state(mis->from_src_file, &local_err);
    mis->loadvm_co = NULL;

    trace_vmstate_downtime_checkpoint("dst-precopy-loadvm-completed");

    trace_process_incoming_migration_co_end(ret);
    if (mis->have_listen_thread) {
        /*
         * Postcopy was started, cleanup should happen at the end of the
         * postcopy listen thread.
         */
        trace_process_incoming_migration_co_postcopy_end_main();
        goto out;
    }

    if (ret < 0) {
        error_prepend(&local_err, "load of migration failed: %s: ",
                      strerror(-ret));
        goto fail;
    }

    if (migration_incoming_colo_enabled()) {
        /* yield until COLO exit */
        colo_incoming_co();
    }

    migration_bh_schedule(process_incoming_migration_bh, mis);
    goto out;

fail:
    migrate_set_state(&mis->state, MIGRATION_STATUS_ACTIVE,
                      MIGRATION_STATUS_FAILED);
    migrate_error_propagate(s, local_err);
    migration_incoming_state_destroy();

    if (mis->exit_on_error) {
        WITH_QEMU_LOCK_GUARD(&s->error_mutex) {
            error_report_err(s->error);
            s->error = NULL;
        }

        exit(EXIT_FAILURE);
    }
out:
    /* Pairs with the refcount taken in qmp_migrate_incoming() */
    migrate_incoming_unref_outgoing_state();
}

/*
 * Returns whether all the necessary channels to proceed with the
 * incoming migration have been established without error.
 */
bool migration_incoming_setup(QIOChannel *ioc, uint8_t channel, Error **errp)
{
    MigrationIncomingState *mis = migration_incoming_get_current();
    QEMUFile *f;

    if (multifd_recv_setup(errp) != 0) {
        return false;
    }

    switch (channel) {
    case CH_MAIN:
        f = qemu_file_new_input(ioc);
        assert(!mis->from_src_file);
        mis->from_src_file = f;
        qemu_file_set_blocking(f, false, &error_abort);
        break;

    case CH_MULTIFD:
        if (!multifd_recv_new_channel(ioc, errp)) {
            return false;
        }
        break;

    case CH_POSTCOPY:
        assert(!mis->postcopy_qemufile_dst);
        f = qemu_file_new_input(ioc);
        postcopy_preempt_new_channel(mis, f);
        return false;

    default:
        g_assert_not_reached();
    }

    return migration_has_main_and_multifd_channels();
}

void migration_outgoing_setup(QIOChannel *ioc)
{
    MigrationState *s = migrate_get_current();
    QEMUFile *f = qemu_file_new_output(ioc);

    qemu_mutex_lock(&s->qemu_file_lock);
    s->to_dst_file = f;
    qemu_mutex_unlock(&s->qemu_file_lock);
}

/* Returns true if recovered from a paused migration, otherwise false */
static bool postcopy_try_recover(void)
{
    MigrationIncomingState *mis = migration_incoming_get_current();

    if (mis->state == MIGRATION_STATUS_POSTCOPY_PAUSED) {
        /* Resumed from a paused postcopy migration */

        /* This should be set already in migration_incoming_setup() */
        assert(mis->from_src_file);
        /* Postcopy has standalone thread to do vm load */
        qemu_file_set_blocking(mis->from_src_file, true, &error_abort);

        /* Re-configure the return path */
        mis->to_src_file = qemu_file_get_return_path(mis->from_src_file);

        migrate_set_state(&mis->state, MIGRATION_STATUS_POSTCOPY_PAUSED,
                          MIGRATION_STATUS_POSTCOPY_RECOVER);

        /*
         * Here, we only wake up the main loading thread (while the
         * rest threads will still be waiting), so that we can receive
         * commands from source now, and answer it if needed. The
         * rest threads will be woken up afterwards until we are sure
         * that source is ready to reply to page requests.
         */
        qemu_sem_post(&mis->postcopy_pause_sem_dst);
        return true;
    }

    return false;
}

void migration_start_incoming(void)
{
    if (postcopy_try_recover()) {
        return;
    }

    Coroutine *co = qemu_coroutine_create(process_incoming_migration_co, NULL);
    qemu_coroutine_enter(co);
}

int migrate_send_rp_switchover_ack(MigrationIncomingState *mis)
{
    return migrate_send_rp_message(mis, MIG_RP_MSG_SWITCHOVER_ACK, 0, NULL);
}

/*
 * Send a 'SHUT' message on the return channel with the given value
 * to indicate that we've finished with the RP.  Non-0 value indicates
 * error.
 */
void migrate_send_rp_shut(MigrationIncomingState *mis,
                          uint32_t value)
{
    uint32_t buf;

    buf = cpu_to_be32(value);
    migrate_send_rp_message(mis, MIG_RP_MSG_SHUT, sizeof(buf), &buf);
}

/*
 * Send a 'PONG' message on the return channel with the given value
 * (normally in response to a 'PING')
 */
void migrate_send_rp_pong(MigrationIncomingState *mis,
                          uint32_t value)
{
    uint32_t buf;

    buf = cpu_to_be32(value);
    migrate_send_rp_message(mis, MIG_RP_MSG_PONG, sizeof(buf), &buf);
}

void migrate_send_rp_recv_bitmap(MigrationIncomingState *mis,
                                 char *block_name)
{
    char buf[512];
    int len;
    int64_t res;

    /*
     * First, we send the header part. It contains only the len of
     * idstr, and the idstr itself.
     */
    len = strlen(block_name);
    buf[0] = len;
    memcpy(buf + 1, block_name, len);

    if (mis->state != MIGRATION_STATUS_POSTCOPY_RECOVER) {
        error_report("%s: MSG_RP_RECV_BITMAP only used for recovery",
                     __func__);
        return;
    }

    migrate_send_rp_message(mis, MIG_RP_MSG_RECV_BITMAP, len + 1, buf);

    /*
     * Next, we dump the received bitmap to the stream.
     *
     * TODO: currently we are safe since we are the only one that is
     * using the to_src_file handle (fault thread is still paused),
     * and it's ok even not taking the mutex. However the best way is
     * to take the lock before sending the message header, and release
     * the lock after sending the bitmap.
     */
    qemu_mutex_lock(&mis->rp_mutex);
    res = ramblock_recv_bitmap_send(mis->to_src_file, block_name);
    qemu_mutex_unlock(&mis->rp_mutex);

    trace_migrate_send_rp_recv_bitmap(block_name, res);
}

void migrate_send_rp_resume_ack(MigrationIncomingState *mis, uint32_t value)
{
    uint32_t buf;

    buf = cpu_to_be32(value);
    migrate_send_rp_message(mis, MIG_RP_MSG_RESUME_ACK, sizeof(buf), &buf);
}

bool migration_is_running(void)
{
    MigrationState *s = current_migration;

    if (!s) {
        return false;
    }

    switch (s->state) {
    case MIGRATION_STATUS_ACTIVE:
    case MIGRATION_STATUS_POSTCOPY_DEVICE:
    case MIGRATION_STATUS_POSTCOPY_ACTIVE:
    case MIGRATION_STATUS_POSTCOPY_PAUSED:
    case MIGRATION_STATUS_POSTCOPY_RECOVER_SETUP:
    case MIGRATION_STATUS_POSTCOPY_RECOVER:
    case MIGRATION_STATUS_SETUP:
    case MIGRATION_STATUS_PRE_SWITCHOVER:
    case MIGRATION_STATUS_DEVICE:
    case MIGRATION_STATUS_WAIT_UNPLUG:
    case MIGRATION_STATUS_CANCELLING:
    case MIGRATION_STATUS_COLO:
        return true;
    default:
        return false;
    }
}

static bool migration_is_active(void)
{
    MigrationState *s = current_migration;

    return (s->state == MIGRATION_STATUS_ACTIVE ||
            s->state == MIGRATION_STATUS_POSTCOPY_DEVICE ||
            s->state == MIGRATION_STATUS_POSTCOPY_ACTIVE);
}

static bool migrate_show_downtime(MigrationState *s)
{
    return (s->state == MIGRATION_STATUS_COMPLETED) || migration_in_postcopy();
}

static void populate_time_info(MigrationInfo *info, MigrationState *s)
{
    info->has_status = true;
    info->has_setup_time = true;
    info->setup_time = s->setup_time;

    if (s->state == MIGRATION_STATUS_COMPLETED) {
        info->has_total_time = true;
        info->total_time = s->total_time;
    } else {
        info->has_total_time = true;
        info->total_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME) -
                           s->start_time;
    }

    if (migrate_show_downtime(s)) {
        info->has_downtime = true;
        info->downtime = s->downtime;
    } else {
        info->has_expected_downtime = true;
        info->expected_downtime = s->expected_downtime;
    }
}

static void populate_ram_info(MigrationInfo *info, MigrationState *s)
{
    size_t page_size = qemu_target_page_size();

    info->ram = g_malloc0(sizeof(*info->ram));
    info->ram->transferred = migration_transferred_bytes();
    info->ram->total = ram_bytes_total();
    info->ram->duplicate = qatomic_read(&mig_stats.zero_pages);
    info->ram->normal = qatomic_read(&mig_stats.normal_pages);
    info->ram->normal_bytes = info->ram->normal * page_size;
    info->ram->mbps = s->mbps;
    info->ram->dirty_sync_count =
        qatomic_read(&mig_stats.dirty_sync_count);
    info->ram->dirty_sync_missed_zero_copy =
        qatomic_read(&mig_stats.dirty_sync_missed_zero_copy);
    info->ram->postcopy_requests =
        qatomic_read(&mig_stats.postcopy_requests);
    info->ram->page_size = page_size;
    info->ram->multifd_bytes = qatomic_read(&mig_stats.multifd_bytes);
    info->ram->pages_per_second = s->pages_per_second;
    info->ram->precopy_bytes = qatomic_read(&mig_stats.precopy_bytes);
    info->ram->downtime_bytes = qatomic_read(&mig_stats.downtime_bytes);
    info->ram->postcopy_bytes = qatomic_read(&mig_stats.postcopy_bytes);

    if (migrate_xbzrle()) {
        info->xbzrle_cache = g_malloc0(sizeof(*info->xbzrle_cache));
        info->xbzrle_cache->cache_size = migrate_xbzrle_cache_size();
        info->xbzrle_cache->bytes = xbzrle_counters.bytes;
        info->xbzrle_cache->pages = xbzrle_counters.pages;
        info->xbzrle_cache->cache_miss = xbzrle_counters.cache_miss;
        info->xbzrle_cache->cache_miss_rate = xbzrle_counters.cache_miss_rate;
        info->xbzrle_cache->encoding_rate = xbzrle_counters.encoding_rate;
        info->xbzrle_cache->overflow = xbzrle_counters.overflow;
    }

    if (cpu_throttle_active()) {
        info->has_cpu_throttle_percentage = true;
        info->cpu_throttle_percentage = cpu_throttle_get_percentage();
    }

    if (s->state != MIGRATION_STATUS_COMPLETED) {
        info->ram->remaining = ram_bytes_remaining();
        info->ram->dirty_pages_rate =
           qatomic_read(&mig_stats.dirty_pages_rate);
    }

    if (migrate_dirty_limit() && dirtylimit_in_service()) {
        info->has_dirty_limit_throttle_time_per_round = true;
        info->dirty_limit_throttle_time_per_round =
                            dirtylimit_throttle_time_per_round();

        info->has_dirty_limit_ring_full_time = true;
        info->dirty_limit_ring_full_time = dirtylimit_ring_full_time();
    }
}

static void fill_source_migration_info(MigrationInfo *info)
{
    MigrationState *s = migrate_get_current();
    int state = qatomic_read(&s->state);
    GSList *cur_blocker = migration_blockers[migrate_mode()];

    info->blocked_reasons = NULL;

    /*
     * There are two types of reasons a migration might be blocked;
     * a) devices marked in VMState as non-migratable, and
     * b) Explicit migration blockers
     * We need to add both of them here.
     */
    qemu_savevm_non_migratable_list(&info->blocked_reasons);

    while (cur_blocker) {
        QAPI_LIST_PREPEND(info->blocked_reasons,
                          g_strdup(error_get_pretty(cur_blocker->data)));
        cur_blocker = g_slist_next(cur_blocker);
    }
    info->has_blocked_reasons = info->blocked_reasons != NULL;

    switch (state) {
    case MIGRATION_STATUS_NONE:
        /* no migration has happened ever */
        /* do not overwrite destination migration status */
        return;
    case MIGRATION_STATUS_SETUP:
        info->has_status = true;
        info->has_total_time = false;
        break;
    case MIGRATION_STATUS_ACTIVE:
    case MIGRATION_STATUS_CANCELLING:
    case MIGRATION_STATUS_POSTCOPY_DEVICE:
    case MIGRATION_STATUS_POSTCOPY_ACTIVE:
    case MIGRATION_STATUS_PRE_SWITCHOVER:
    case MIGRATION_STATUS_DEVICE:
    case MIGRATION_STATUS_POSTCOPY_PAUSED:
    case MIGRATION_STATUS_POSTCOPY_RECOVER_SETUP:
    case MIGRATION_STATUS_POSTCOPY_RECOVER:
        /* TODO add some postcopy stats */
        populate_time_info(info, s);
        populate_ram_info(info, s);
        migration_populate_vfio_info(info);
        break;
    case MIGRATION_STATUS_COLO:
        info->has_status = true;
        /* TODO: display COLO specific information (checkpoint info etc.) */
        break;
    case MIGRATION_STATUS_COMPLETED:
        populate_time_info(info, s);
        populate_ram_info(info, s);
        migration_populate_vfio_info(info);
        break;
    case MIGRATION_STATUS_FAILED:
        info->has_status = true;
        break;
    case MIGRATION_STATUS_CANCELLED:
        info->has_status = true;
        break;
    case MIGRATION_STATUS_WAIT_UNPLUG:
        info->has_status = true;
        break;
    }
    info->status = state;

    QEMU_LOCK_GUARD(&s->error_mutex);
    if (s->error) {
        info->error_desc = g_strdup(error_get_pretty(s->error));
    }
}

static void fill_destination_migration_info(MigrationInfo *info)
{
    MigrationIncomingState *mis = migration_incoming_get_current();

    if (mis->socket_address_list) {
        info->has_socket_address = true;
        info->socket_address =
            QAPI_CLONE(SocketAddressList, mis->socket_address_list);
    }

    switch (mis->state) {
    case MIGRATION_STATUS_SETUP:
    case MIGRATION_STATUS_CANCELLING:
    case MIGRATION_STATUS_CANCELLED:
    case MIGRATION_STATUS_ACTIVE:
    case MIGRATION_STATUS_POSTCOPY_DEVICE:
    case MIGRATION_STATUS_POSTCOPY_ACTIVE:
    case MIGRATION_STATUS_POSTCOPY_PAUSED:
    case MIGRATION_STATUS_POSTCOPY_RECOVER:
    case MIGRATION_STATUS_FAILED:
    case MIGRATION_STATUS_COLO:
        info->has_status = true;
        break;
    case MIGRATION_STATUS_COMPLETED:
        info->has_status = true;
        fill_destination_postcopy_migration_info(info);
        break;
    default:
        return;
    }
    info->status = mis->state;

    if (!info->error_desc) {
        MigrationState *s = migrate_get_current();
        QEMU_LOCK_GUARD(&s->error_mutex);

        if (s->error) {
            info->error_desc = g_strdup(error_get_pretty(s->error));
        }
    }
}

MigrationInfo *qmp_query_migrate(Error **errp)
{
    MigrationInfo *info = g_malloc0(sizeof(*info));

    fill_destination_migration_info(info);
    fill_source_migration_info(info);

    return info;
}

void qmp_migrate_start_postcopy(Error **errp)
{
    MigrationState *s = migrate_get_current();

    if (!migrate_postcopy()) {
        error_setg(errp, "Enable postcopy with migrate_set_capability before"
                         " the start of migration");
        return;
    }

    if (s->state == MIGRATION_STATUS_NONE) {
        error_setg(errp, "Postcopy must be started after migration has been"
                         " started");
        return;
    }
    /*
     * we don't error if migration has finished since that would be racy
     * with issuing this command.
     */
    qatomic_set(&s->start_postcopy, true);
}

/* shared migration helpers */

void migrate_set_state(MigrationStatus *state, MigrationStatus old_state,
                       MigrationStatus new_state)
{
    assert(new_state < MIGRATION_STATUS__MAX);
    if (qatomic_cmpxchg(state, old_state, new_state) == old_state) {
        trace_migrate_set_state(MigrationStatus_str(new_state));
        migrate_generate_event(new_state);
    }
}

static void migration_cleanup_json_writer(MigrationState *s)
{
    g_clear_pointer(&s->vmdesc, json_writer_free);
}

static void migration_cleanup(MigrationState *s)
{
    QEMUFile *tmp = NULL;

    trace_migration_cleanup();

    migration_cleanup_json_writer(s);

    g_free(s->hostname);
    s->hostname = NULL;

    qemu_savevm_state_cleanup();
    cpr_state_close();
    cpr_transfer_source_destroy(s);

    close_return_path_on_source(s);

    if (s->migration_thread_running) {
        bql_unlock();
        qemu_thread_join(&s->thread);
        s->migration_thread_running = false;
        bql_lock();
    }

    WITH_QEMU_LOCK_GUARD(&s->qemu_file_lock) {
        /*
         * Close the file handle without the lock to make sure the critical
         * section won't block for long.
         */
        tmp = s->to_dst_file;
        s->to_dst_file = NULL;
    }

    if (tmp) {
        /*
         * We only need to shutdown multifd if tmp!=NULL, because if
         * tmp==NULL, it means the main channel isn't established, while
         * multifd is only setup after that (in migration_thread()).
         */
        multifd_send_shutdown();
        migration_ioc_unregister_yank_from_file(tmp);
        qemu_fclose(tmp);
    }

    assert(!migration_is_active());

    if (s->state == MIGRATION_STATUS_CANCELLING) {
        migrate_set_state(&s->state, MIGRATION_STATUS_CANCELLING,
                          MIGRATION_STATUS_CANCELLED);
    }

    /*
     * FAILED notification should have already happened.  Notify DONE if
     * migration completed successfully.
     */
    if (!migration_has_failed(s)) {
        migration_call_notifiers(MIG_EVENT_DONE, NULL);
    }

    yank_unregister_instance(MIGRATION_YANK_INSTANCE);
}

static void migration_cleanup_bh(void *opaque)
{
    MigrationState *s = opaque;

    migration_cleanup(s);
    if (s->error) {
        error_report_err(error_copy(s->error));
    }
}

/*
 * Propagate the Error* object to migration core.  The caller mustn't
 * reference the error pointer after the function returned, because the
 * Error* object might be freed.
 */
void migrate_error_propagate(MigrationState *s, Error *error)
{
    QEMU_LOCK_GUARD(&s->error_mutex);
    trace_migrate_error(error_get_pretty(error));
    error_propagate(&s->error, error);
}

bool migrate_has_error(MigrationState *s)
{
    /* The lock is not helpful here, but still follow the rule */
    QEMU_LOCK_GUARD(&s->error_mutex);
    return qatomic_read(&s->error);
}

static void migrate_error_free(MigrationState *s)
{
    QEMU_LOCK_GUARD(&s->error_mutex);
    error_free(s->error);
    s->error = NULL;
}

void migration_connect_error_propagate(MigrationState *s, Error *error)
{
    MigrationStatus current = s->state;
    MigrationStatus next = MIGRATION_STATUS_NONE;
    bool resume = false;

    switch (current) {
    case MIGRATION_STATUS_SETUP:
        next = MIGRATION_STATUS_FAILED;
        break;

    case MIGRATION_STATUS_POSTCOPY_PAUSED:
        resume = true;
        break;

    case MIGRATION_STATUS_POSTCOPY_RECOVER_SETUP:
        /* Never fail a postcopy migration; switch back to PAUSED instead */
        next = MIGRATION_STATUS_POSTCOPY_PAUSED;
        resume = true;
        break;

    case MIGRATION_STATUS_CANCELLING:
        /*
         * Don't move out of CANCELLING, the only valid transition is to
         * CANCELLED, at migration_cleanup().
         */
        break;

    default:
        /*
         * This really shouldn't happen. Just be careful to not crash a VM
         * just for this.  Instead, dump something.
         */
        error_report("%s: Illegal migration status (%s) detected",
                     __func__, MigrationStatus_str(current));
        return;
    }

    if (next) {
        migrate_set_state(&s->state, current, next);
    }

    migrate_error_propagate(s, error);

    if (!resume) {
        migration_cleanup(s);
    }
}

void migration_cancel(void)
{
    MigrationState *s = migrate_get_current();
    int old_state ;
    bool setup = (s->state == MIGRATION_STATUS_SETUP);

    trace_migration_cancel();

    if (migrate_dirty_limit()) {
        qmp_cancel_vcpu_dirty_limit(false, -1, NULL);
    }

    WITH_QEMU_LOCK_GUARD(&s->qemu_file_lock) {
        if (s->rp_state.from_dst_file) {
            /* shutdown the rp socket, so causing the rp thread to shutdown */
            qemu_file_shutdown(s->rp_state.from_dst_file);
        }
    }

    do {
        old_state = s->state;
        if (!migration_is_running()) {
            break;
        }
        /* If the migration is paused, kick it out of the pause */
        if (old_state == MIGRATION_STATUS_PRE_SWITCHOVER) {
            qemu_event_set(&s->pause_event);
        }
        migrate_set_state(&s->state, old_state, MIGRATION_STATUS_CANCELLING);
    } while (s->state != MIGRATION_STATUS_CANCELLING);

    /*
     * If we're unlucky the migration code might be stuck somewhere in a
     * send/write while the network has failed and is waiting to timeout;
     * if we've got shutdown(2) available then we can force it to quit.
     */
    if (s->state == MIGRATION_STATUS_CANCELLING) {
        WITH_QEMU_LOCK_GUARD(&s->qemu_file_lock) {
            if (s->to_dst_file) {
                qemu_file_shutdown(s->to_dst_file);
            }
        }
    }

    /*
     * If migration_connect_outgoing has not been called, then there
     * is no path that will complete the cancellation. Do it now.
     */
    if (setup && !s->to_dst_file) {
        migrate_set_state(&s->state, MIGRATION_STATUS_CANCELLING,
                          MIGRATION_STATUS_CANCELLED);
        cpr_state_close();
        cpr_transfer_source_destroy(s);
    }
}

static void add_notifiers(NotifierWithReturn *notify, unsigned modes)
{
    for (MigMode mode = 0; mode < MIG_MODE__MAX; mode++) {
        if (modes & BIT(mode)) {
            migration_state_notifiers[mode] =
                g_slist_prepend(migration_state_notifiers[mode], notify);
        }
    }
}

void migration_add_notifier_modes(NotifierWithReturn *notify,
                                  MigrationNotifyFunc func, unsigned modes)
{
    notify->notify = (NotifierWithReturnFunc)func;
    add_notifiers(notify, modes);
}

void migration_add_notifier_mode(NotifierWithReturn *notify,
                                 MigrationNotifyFunc func, MigMode mode)
{
    migration_add_notifier_modes(notify, func, BIT(mode));
}

void migration_add_notifier(NotifierWithReturn *notify,
                            MigrationNotifyFunc func)
{
    migration_add_notifier_mode(notify, func, MIG_MODE_NORMAL);
}

void migration_remove_notifier(NotifierWithReturn *notify)
{
    if (notify->notify) {
        for (MigMode mode = 0; mode < MIG_MODE__MAX; mode++) {
            migration_state_notifiers[mode] =
                g_slist_remove(migration_state_notifiers[mode], notify);
        }
        notify->notify = NULL;
    }
}

int migration_call_notifiers(MigrationEventType type, Error **errp)
{
    MigMode mode = migrate_mode();
    MigrationEvent e;
    NotifierWithReturn *notifier;
    GSList *elem, *next;
    int ret;

    trace_migration_call_notifiers(type);

    e.type = type;

    for (elem = migration_state_notifiers[mode]; elem; elem = next) {
        next = elem->next;
        notifier = (NotifierWithReturn *)elem->data;
        ret = notifier->notify(notifier, &e, errp);
        if (ret) {
            assert(type == MIG_EVENT_SETUP);
            return ret;
        }
    }

    return 0;
}

bool migration_has_failed(MigrationState *s)
{
    return (s->state == MIGRATION_STATUS_CANCELLING ||
            s->state == MIGRATION_STATUS_CANCELLED ||
            s->state == MIGRATION_STATUS_FAILED);
}

bool migration_in_postcopy(void)
{
    MigrationState *s = migrate_get_current();

    switch (s->state) {
    case MIGRATION_STATUS_POSTCOPY_DEVICE:
    case MIGRATION_STATUS_POSTCOPY_ACTIVE:
    case MIGRATION_STATUS_POSTCOPY_PAUSED:
    case MIGRATION_STATUS_POSTCOPY_RECOVER_SETUP:
    case MIGRATION_STATUS_POSTCOPY_RECOVER:
        return true;
    default:
        return false;
    }
}

bool migration_postcopy_is_alive(MigrationStatus state)
{
    switch (state) {
    case MIGRATION_STATUS_POSTCOPY_ACTIVE:
    case MIGRATION_STATUS_POSTCOPY_RECOVER:
        return true;
    default:
        return false;
    }
}

bool migration_in_incoming_postcopy(void)
{
    PostcopyState ps = postcopy_state_get();

    return ps >= POSTCOPY_INCOMING_DISCARD && ps < POSTCOPY_INCOMING_END;
}

bool migration_incoming_postcopy_advised(void)
{
    PostcopyState ps = postcopy_state_get();

    return ps >= POSTCOPY_INCOMING_ADVISE && ps < POSTCOPY_INCOMING_END;
}

bool migration_in_bg_snapshot(void)
{
    return migrate_background_snapshot() && migration_is_running();
}

bool migration_thread_is_self(void)
{
    MigrationState *s = current_migration;

    return qemu_thread_is_self(&s->thread);
}

bool migrate_mode_is_cpr(void)
{
    MigMode mode = migrate_mode();
    return mode == MIG_MODE_CPR_REBOOT ||
           mode == MIG_MODE_CPR_TRANSFER ||
           mode == MIG_MODE_CPR_EXEC;
}

int migrate_init(MigrationState *s, Error **errp)
{
    int ret;

    ret = qemu_savevm_state_prepare(errp);
    if (ret) {
        return ret;
    }

    /*
     * Reinitialise all migration state, except
     * parameters/capabilities that the user set, and
     * locks.
     */
    s->to_dst_file = NULL;
    s->state = MIGRATION_STATUS_NONE;
    s->rp_state.from_dst_file = NULL;
    s->mbps = 0.0;
    s->pages_per_second = 0.0;
    s->downtime = 0;
    s->expected_downtime = 0;
    s->setup_time = 0;
    s->start_postcopy = false;
    s->migration_thread_running = false;

    migrate_error_free(s);

    if (should_send_vmdesc()) {
        s->vmdesc = json_writer_new(false);
    }

    migrate_set_state(&s->state, MIGRATION_STATUS_NONE, MIGRATION_STATUS_SETUP);

    s->start_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME);
    s->total_time = 0;
    s->vm_old_state = -1;
    s->iteration_initial_bytes = 0;
    s->threshold_size = 0;
    s->switchover_acked = false;
    s->rdma_migration = false;
    /*
     * set mig_stats memory to zero for a new migration
     */
    memset(&mig_stats, 0, sizeof(mig_stats));
    migration_reset_vfio_bytes_transferred();

    s->postcopy_package_loaded = false;
    qemu_event_reset(&s->postcopy_package_loaded_event);

    return 0;
}

static bool is_busy(Error **reasonp, Error **errp)
{
    ERRP_GUARD();

    /* Snapshots are similar to migrations, so check RUN_STATE_SAVE_VM too. */
    if (runstate_check(RUN_STATE_SAVE_VM) || migration_is_running()) {
        error_propagate_prepend(errp, *reasonp,
                                "disallowing migration blocker "
                                "(migration/snapshot in progress) for: ");
        *reasonp = NULL;
        return true;
    }
    return false;
}

static bool is_only_migratable(Error **reasonp, unsigned modes, Error **errp)
{
    ERRP_GUARD();

    if (only_migratable && (modes & BIT(MIG_MODE_NORMAL))) {
        error_propagate_prepend(errp, *reasonp,
                                "disallowing migration blocker "
                                "(--only-migratable) for: ");
        *reasonp = NULL;
        return true;
    }
    return false;
}

static int add_blockers(Error **reasonp, unsigned modes, Error **errp)
{
    for (MigMode mode = 0; mode < MIG_MODE__MAX; mode++) {
        if (modes & BIT(mode)) {
            migration_blockers[mode] = g_slist_prepend(migration_blockers[mode],
                                                       *reasonp);
        }
    }
    return 0;
}

int migrate_add_blocker(Error **reasonp, Error **errp)
{
    return migrate_add_blocker_modes(reasonp, -1u, errp);
}

int migrate_add_blocker_normal(Error **reasonp, Error **errp)
{
    return migrate_add_blocker_modes(reasonp, BIT(MIG_MODE_NORMAL), errp);
}

int migrate_add_blocker_modes(Error **reasonp, unsigned modes, Error **errp)
{
    if (is_only_migratable(reasonp, modes, errp)) {
        return -EACCES;
    } else if (is_busy(reasonp, errp)) {
        return -EBUSY;
    }
    return add_blockers(reasonp, modes, errp);
}

int migrate_add_blocker_internal(Error **reasonp, Error **errp)
{
    unsigned modes = BIT(MIG_MODE__MAX) - 1;

    if (is_busy(reasonp, errp)) {
        return -EBUSY;
    }
    return add_blockers(reasonp, modes, errp);
}

void migrate_del_blocker(Error **reasonp)
{
    if (*reasonp) {
        for (MigMode mode = 0; mode < MIG_MODE__MAX; mode++) {
            migration_blockers[mode] = g_slist_remove(migration_blockers[mode],
                                                      *reasonp);
        }
        error_free(*reasonp);
        *reasonp = NULL;
    }
}

void qmp_migrate_incoming(const char *uri, bool has_channels,
                          MigrationChannelList *channels,
                          bool has_exit_on_error, bool exit_on_error,
                          Error **errp)
{
    Error *local_err = NULL;
    static bool once = true;
    MigrationIncomingState *mis = migration_incoming_get_current();

    if (!once) {
        error_setg(errp, "The incoming migration has already been started");
        return;
    }
    if (!runstate_check(RUN_STATE_INMIGRATE)) {
        error_setg(errp, "'-incoming' was not specified on the command line");
        return;
    }

    if (!yank_register_instance(MIGRATION_YANK_INSTANCE, errp)) {
        return;
    }

    mis->exit_on_error =
        has_exit_on_error ? exit_on_error : INMIGRATE_DEFAULT_EXIT_ON_ERROR;

    qemu_setup_incoming_migration(uri, has_channels, channels, &local_err);

    if (local_err) {
        yank_unregister_instance(MIGRATION_YANK_INSTANCE);
        error_propagate(errp, local_err);
        return;
    }

    /*
     * Making sure MigrationState is available until incoming migration
     * completes.
     *
     * NOTE: QEMU _might_ leak this refcount in some failure paths, but
     * that's OK.  This is the minimum change we need to at least making
     * sure success case is clean on the refcount.  We can try harder to
     * make it accurate for any kind of failures, but it might be an
     * overkill and doesn't bring us much benefit.
     */
    migrate_incoming_ref_outgoing_state();
    once = false;
}

void qmp_migrate_recover(const char *uri, Error **errp)
{
    MigrationIncomingState *mis = migration_incoming_get_current();

    /*
     * Don't even bother to use ERRP_GUARD() as it _must_ always be set by
     * callers (no one should ignore a recover failure); if there is, it's a
     * programming error.
     */
    assert(errp);

    if (mis->state != MIGRATION_STATUS_POSTCOPY_PAUSED) {
        error_setg(errp, "Migrate recover can only be run "
                   "when postcopy is paused.");
        return;
    }

    /* If there's an existing transport, release it */
    migration_incoming_transport_cleanup(mis);

    /*
     * Note that this call will never start a real migration; it will
     * only re-setup the migration stream and poke existing migration
     * to continue using that newly established channel.
     */
    qemu_setup_incoming_migration(uri, false, NULL, errp);
}

void qmp_migrate_pause(Error **errp)
{
    MigrationState *ms = migrate_get_current();
    MigrationIncomingState *mis = migration_incoming_get_current();
    int ret = 0;

    if (migration_postcopy_is_alive(ms->state)) {
        /* Source side, during postcopy */
        Error *error = NULL;

        /* Tell the core migration that we're pausing */
        error_setg(&error, "Postcopy migration is paused by the user");
        migrate_error_propagate(ms, error);

        qemu_mutex_lock(&ms->qemu_file_lock);
        if (ms->to_dst_file) {
            ret = qemu_file_shutdown(ms->to_dst_file);
        }
        qemu_mutex_unlock(&ms->qemu_file_lock);
        if (ret) {
            error_setg(errp, "Failed to pause source migration");
        }

        /*
         * Kick the migration thread out of any waiting windows (on behalf
         * of the rp thread).
         */
        migration_rp_kick(ms);

        return;
    }

    if (migration_postcopy_is_alive(mis->state)) {
        ret = qemu_file_shutdown(mis->from_src_file);
        if (ret) {
            error_setg(errp, "Failed to pause destination migration");
        }
        return;
    }

    error_setg(errp, "migrate-pause is currently only supported "
               "during postcopy-active or postcopy-recover state");
}

bool migration_is_blocked(Error **errp)
{
    GSList *blockers = migration_blockers[migrate_mode()];

    if (qemu_savevm_state_blocked(errp)) {
        return true;
    }

    if (blockers) {
        error_propagate(errp, error_copy(blockers->data));
        return true;
    }

    return false;
}

/* Returns true if continue to migrate, or false if error detected */
static bool migrate_prepare(MigrationState *s, bool resume, Error **errp)
{
    if (resume) {
        if (s->state != MIGRATION_STATUS_POSTCOPY_PAUSED) {
            error_setg(errp, "Cannot resume if there is no "
                       "paused migration");
            return false;
        }

        /*
         * Postcopy recovery won't work well with release-ram
         * capability since release-ram will drop the page buffer as
         * long as the page is put into the send buffer.  So if there
         * is a network failure happened, any page buffers that have
         * not yet reached the destination VM but have already been
         * sent from the source VM will be lost forever.  Let's refuse
         * the client from resuming such a postcopy migration.
         * Luckily release-ram was designed to only be used when src
         * and destination VMs are on the same host, so it should be
         * fine.
         */
        if (migrate_release_ram()) {
            error_setg(errp, "Postcopy recovery cannot work "
                       "when release-ram capability is set");
            return false;
        }

        migrate_set_state(&s->state, MIGRATION_STATUS_POSTCOPY_PAUSED,
                          MIGRATION_STATUS_POSTCOPY_RECOVER_SETUP);

        /*
         * If there's a previous error, free it and prepare for
         * another one. For the non-resume case, this happens at
         * migrate_init() below.
         */
        migrate_error_free(s);

        /* This is a resume, skip init status */
        return true;
    }

    if (migration_is_running()) {
        error_setg(errp, "There's a migration process in progress");
        return false;
    }

    if (runstate_check(RUN_STATE_INMIGRATE)) {
        error_setg(errp, "Guest is waiting for an incoming migration");
        return false;
    }

    if (runstate_check(RUN_STATE_POSTMIGRATE)) {
        error_setg(errp, "Can't migrate the vm that was paused due to "
                   "previous migration");
        return false;
    }

    if (kvm_hwpoisoned_mem()) {
        error_setg(errp, "Can't migrate this vm with hardware poisoned memory, "
                   "please reboot the vm and try again");
        return false;
    }

    if (migrate_mode() == MIG_MODE_CPR_EXEC &&
        !s->parameters.cpr_exec_command) {
        error_setg(errp, "cpr-exec mode requires setting cpr-exec-command");
        return false;
    }

    if (migration_is_blocked(errp)) {
        return false;
    }

    if (migrate_mapped_ram()) {
        if (migrate_tls()) {
            error_setg(errp, "Cannot use TLS with mapped-ram");
            return false;
        }

        if (migrate_multifd_compression()) {
            error_setg(errp, "Cannot use compression with mapped-ram");
            return false;
        }
    }

    if (migrate_mode_is_cpr()) {
        const char *conflict = NULL;

        if (migrate_postcopy()) {
            conflict = "postcopy";
        } else if (migrate_background_snapshot()) {
            conflict = "background snapshot";
        } else if (migrate_colo()) {
            conflict = "COLO";
        }

        if (conflict) {
            error_setg(errp, "Cannot use %s with CPR", conflict);
            return false;
        }

        if (s->parameters.mode == MIG_MODE_CPR_EXEC &&
            !s->parameters.cpr_exec_command) {
            error_setg(errp, "Parameter 'cpr-exec-command' required for cpr-exec");
            return false;
        }
    }

    if (migrate_init(s, errp)) {
        return false;
    }

    yank_register_instance(MIGRATION_YANK_INSTANCE, &error_abort);

    return true;
}

static gboolean migration_connect_outgoing_cb(QIOChannel *channel,
                                              GIOCondition cond, void *opaque)
{
    MigrationState *s = migrate_get_current();
    Error *local_err = NULL;

    migration_connect_outgoing(s, opaque, &local_err);

    if (local_err) {
        migration_connect_error_propagate(s, local_err);
    }

    return G_SOURCE_REMOVE;
}

void qmp_migrate(const char *uri, bool has_channels,
                 MigrationChannelList *channels,
                 bool has_resume, bool resume, Error **errp)
{
    MigrationState *s = migrate_get_current();
    g_autoptr(MigrationChannel) main_ch = NULL;
    g_autoptr(MigrationChannel) cpr_ch = NULL;

    if (!migration_channel_parse_input(uri, channels, &main_ch, &cpr_ch,
                                       errp)) {
        return;
    }

    /* transport mechanism not suitable for migration? */
    if (!migration_transport_compatible(main_ch->addr, errp)) {
        return;
    }

    if (!migrate_prepare(s, has_resume && resume, errp)) {
        /* Error detected, put into errp */
        return;
    }

    /*
     * The migrate_prepare() above calls migrate_init(). From this
     * point on, until the end of migration, make sure any failures
     * eventually result in a call to migration_cleanup().
     */
    Error *local_err = NULL;

    if (!cpr_state_save(cpr_ch, &local_err)) {
        goto out;
    }

    /*
     * For cpr-transfer, the target may not be listening yet on the migration
     * channel, because first it must finish cpr_load_state.  The target tells
     * us it is listening by closing the cpr-state socket.  Wait for that HUP
     * event before connecting in migration_connect_outgoing.
     *
     * The HUP could occur because the target fails while reading CPR state,
     * in which case the target will not listen for the incoming migration
     * connection, so migration_connect_outgoing will fail to connect,
     * and then recover.
     */
    if (migrate_mode() == MIG_MODE_CPR_TRANSFER) {
        cpr_transfer_add_hup_watch(s, migration_connect_outgoing_cb,
                                   main_ch->addr);

    } else {
        migration_connect_outgoing(s, main_ch->addr, &local_err);
    }

out:
    if (local_err) {
        migration_connect_error_propagate(s, error_copy(local_err));
        error_propagate(errp, local_err);
    }
}

void qmp_migrate_cancel(Error **errp)
{
    /*
     * After postcopy migration has started, the source machine is not
     * recoverable in case of a migration error. This also means the
     * cancel command cannot be used as cancel should allow the
     * machine to continue operation.
     */
    if (migration_in_postcopy()) {
        error_setg(errp, "Postcopy migration in progress, cannot cancel.");
        return;
    }

    migration_cancel();
}

void qmp_migrate_continue(MigrationStatus state, Error **errp)
{
    MigrationState *s = migrate_get_current();
    if (s->state != state) {
        error_setg(errp,  "Migration not in expected state: %s",
                   MigrationStatus_str(s->state));
        return;
    }
    qemu_event_set(&s->pause_event);
}

int migration_rp_wait(MigrationState *s)
{
    /* If migration has failure already, ignore the wait */
    if (migrate_has_error(s)) {
        return -1;
    }

    qemu_sem_wait(&s->rp_state.rp_sem);

    /* After wait, double check that there's no failure */
    if (migrate_has_error(s)) {
        return -1;
    }

    return 0;
}

void migration_rp_kick(MigrationState *s)
{
    qemu_sem_post(&s->rp_state.rp_sem);
}

static struct rp_cmd_args {
    ssize_t     len; /* -1 = variable */
    const char *name;
} rp_cmd_args[] = {
    [MIG_RP_MSG_INVALID]        = { .len = -1, .name = "INVALID" },
    [MIG_RP_MSG_SHUT]           = { .len =  4, .name = "SHUT" },
    [MIG_RP_MSG_PONG]           = { .len =  4, .name = "PONG" },
    [MIG_RP_MSG_REQ_PAGES]      = { .len = 12, .name = "REQ_PAGES" },
    [MIG_RP_MSG_REQ_PAGES_ID]   = { .len = -1, .name = "REQ_PAGES_ID" },
    [MIG_RP_MSG_RECV_BITMAP]    = { .len = -1, .name = "RECV_BITMAP" },
    [MIG_RP_MSG_RESUME_ACK]     = { .len =  4, .name = "RESUME_ACK" },
    [MIG_RP_MSG_SWITCHOVER_ACK] = { .len =  0, .name = "SWITCHOVER_ACK" },
    [MIG_RP_MSG_MAX]            = { .len = -1, .name = "MAX" },
};

/*
 * Process a request for pages received on the return path,
 * We're allowed to send more than requested (e.g. to round to our page size)
 * and we don't need to send pages that have already been sent.
 */
static void
migrate_handle_rp_req_pages(MigrationState *ms, const char* rbname,
                            ram_addr_t start, size_t len, Error **errp)
{
    long our_host_ps = qemu_real_host_page_size();

    trace_migrate_handle_rp_req_pages(rbname, start, len);

    /*
     * Since we currently insist on matching page sizes, just sanity check
     * we're being asked for whole host pages.
     */
    if (!QEMU_IS_ALIGNED(start, our_host_ps) ||
        !QEMU_IS_ALIGNED(len, our_host_ps)) {
        error_setg(errp, "MIG_RP_MSG_REQ_PAGES: Misaligned page request, start:"
                   RAM_ADDR_FMT " len: %zd", start, len);
        return;
    }

    ram_save_queue_pages(rbname, start, len, errp);
}

static bool migrate_handle_rp_recv_bitmap(MigrationState *s, char *block_name,
                                          Error **errp)
{
    RAMBlock *block = qemu_ram_block_by_name(block_name);

    if (!block) {
        error_setg(errp, "MIG_RP_MSG_RECV_BITMAP has invalid block name '%s'",
                   block_name);
        return false;
    }

    /* Fetch the received bitmap and refresh the dirty bitmap */
    return ram_dirty_bitmap_reload(s, block, errp);
}

static bool migrate_handle_rp_resume_ack(MigrationState *s,
                                         uint32_t value, Error **errp)
{
    trace_source_return_path_thread_resume_ack(value);

    if (value != MIGRATION_RESUME_ACK_VALUE) {
        error_setg(errp, "illegal resume_ack value %"PRIu32, value);
        return false;
    }

    /* Now both sides are active. */
    migrate_set_state(&s->state, MIGRATION_STATUS_POSTCOPY_RECOVER,
                      MIGRATION_STATUS_POSTCOPY_ACTIVE);

    /* Notify send thread that time to continue send pages */
    migration_rp_kick(s);

    return true;
}

/*
 * Release ms->rp_state.from_dst_file (and postcopy_qemufile_src if
 * existed) in a safe way.
 */
static void migration_release_dst_files(MigrationState *ms)
{
    QEMUFile *file = NULL;

    WITH_QEMU_LOCK_GUARD(&ms->qemu_file_lock) {
        /*
         * Reset the from_dst_file pointer first before releasing it, as we
         * can't block within lock section
         */
        file = ms->rp_state.from_dst_file;
        ms->rp_state.from_dst_file = NULL;
    }

    /*
     * Do the same to postcopy fast path socket too if there is.  No
     * locking needed because this qemufile should only be managed by
     * return path thread.
     */
    if (ms->postcopy_qemufile_src) {
        migration_ioc_unregister_yank_from_file(ms->postcopy_qemufile_src);
        qemu_file_shutdown(ms->postcopy_qemufile_src);
        qemu_fclose(ms->postcopy_qemufile_src);
        ms->postcopy_qemufile_src = NULL;
    }

    qemu_fclose(file);
}

/*
 * Handles messages sent on the return path towards the source VM
 *
 */
static void *source_return_path_thread(void *opaque)
{
    MigrationState *ms = opaque;
    QEMUFile *rp = ms->rp_state.from_dst_file;
    uint16_t header_len, header_type;
    uint8_t buf[512];
    uint32_t tmp32, sibling_error;
    ram_addr_t start = 0; /* =0 to silence warning */
    size_t  len = 0, expected_len;
    Error *err = NULL;
    int res;

    trace_source_return_path_thread_entry();
    rcu_register_thread();

    while (migration_is_running()) {
        trace_source_return_path_thread_loop_top();

        header_type = qemu_get_be16(rp);
        header_len = qemu_get_be16(rp);

        if (qemu_file_get_error(rp)) {
            qemu_file_get_error_obj(rp, &err);
            goto out;
        }

        if (header_type >= MIG_RP_MSG_MAX ||
            header_type == MIG_RP_MSG_INVALID) {
            error_setg(&err, "Received invalid message 0x%04x length 0x%04x",
                       header_type, header_len);
            goto out;
        }

        if ((rp_cmd_args[header_type].len != -1 &&
            header_len != rp_cmd_args[header_type].len) ||
            header_len > sizeof(buf)) {
            error_setg(&err, "Received '%s' message (0x%04x) with"
                       "incorrect length %d expecting %zu",
                       rp_cmd_args[header_type].name, header_type, header_len,
                       (size_t)rp_cmd_args[header_type].len);
            goto out;
        }

        /* We know we've got a valid header by this point */
        res = qemu_get_buffer(rp, buf, header_len);
        if (res != header_len) {
            error_setg(&err, "Failed reading data for message 0x%04x"
                       " read %d expected %d",
                       header_type, res, header_len);
            goto out;
        }

        /* OK, we have the message and the data */
        switch (header_type) {
        case MIG_RP_MSG_SHUT:
            sibling_error = ldl_be_p(buf);
            trace_source_return_path_thread_shut(sibling_error);
            if (sibling_error) {
                error_setg(&err, "Sibling indicated error %d", sibling_error);
            }
            /*
             * We'll let the main thread deal with closing the RP
             * we could do a shutdown(2) on it, but we're the only user
             * anyway, so there's nothing gained.
             */
            goto out;

        case MIG_RP_MSG_PONG:
            tmp32 = ldl_be_p(buf);
            trace_source_return_path_thread_pong(tmp32);
            qemu_sem_post(&ms->rp_state.rp_pong_acks);
            if (tmp32 == QEMU_VM_PING_PACKAGED_LOADED) {
                trace_source_return_path_thread_postcopy_package_loaded();
                ms->postcopy_package_loaded = true;
                qemu_event_set(&ms->postcopy_package_loaded_event);
            }
            break;

        case MIG_RP_MSG_REQ_PAGES:
            start = ldq_be_p(buf);
            len = ldl_be_p(buf + 8);
            migrate_handle_rp_req_pages(ms, NULL, start, len, &err);
            if (err) {
                goto out;
            }
            break;

        case MIG_RP_MSG_REQ_PAGES_ID:
            expected_len = 12 + 1; /* header + termination */

            if (header_len >= expected_len) {
                start = ldq_be_p(buf);
                len = ldl_be_p(buf + 8);
                /* Now we expect an idstr */
                tmp32 = buf[12]; /* Length of the following idstr */
                buf[13 + tmp32] = '\0';
                expected_len += tmp32;
            }
            if (header_len != expected_len) {
                error_setg(&err, "Req_Page_id with length %d expecting %zd",
                           header_len, expected_len);
                goto out;
            }
            migrate_handle_rp_req_pages(ms, (char *)&buf[13], start, len,
                                        &err);
            if (err) {
                goto out;
            }
            break;

        case MIG_RP_MSG_RECV_BITMAP:
            if (header_len < 1) {
                error_setg(&err, "MIG_RP_MSG_RECV_BITMAP missing block name");
                goto out;
            }
            /* Format: len (1B) + idstr (<255B). This ends the idstr. */
            buf[buf[0] + 1] = '\0';
            if (!migrate_handle_rp_recv_bitmap(ms, (char *)(buf + 1), &err)) {
                goto out;
            }
            break;

        case MIG_RP_MSG_RESUME_ACK:
            tmp32 = ldl_be_p(buf);
            if (!migrate_handle_rp_resume_ack(ms, tmp32, &err)) {
                goto out;
            }
            break;

        case MIG_RP_MSG_SWITCHOVER_ACK:
            ms->switchover_acked = true;
            trace_source_return_path_thread_switchover_acked();
            break;

        default:
            break;
        }
    }

out:
    if (err) {
        migrate_error_propagate(ms, err);
        trace_source_return_path_thread_bad_end();
    }

    if (ms->state == MIGRATION_STATUS_POSTCOPY_RECOVER) {
        /*
         * this will be extremely unlikely: that we got yet another network
         * issue during recovering of the 1st network failure.. during this
         * period the main migration thread can be waiting on rp_sem for
         * this thread to sync with the other side.
         *
         * When this happens, explicitly kick the migration thread out of
         * RECOVER stage and back to PAUSED, so the admin can try
         * everything again.
         */
        migration_rp_kick(ms);
    }

    trace_source_return_path_thread_end();
    rcu_unregister_thread();

    return NULL;
}

static void open_return_path_on_source(MigrationState *ms)
{
    ms->rp_state.from_dst_file = qemu_file_get_return_path(ms->to_dst_file);

    trace_open_return_path_on_source();

    qemu_thread_create(&ms->rp_state.rp_thread, MIGRATION_THREAD_SRC_RETURN,
                       source_return_path_thread, ms, QEMU_THREAD_JOINABLE);
    ms->rp_state.rp_thread_created = true;

    trace_open_return_path_on_source_continue();
}

/* Return true if error detected, or false otherwise */
static bool close_return_path_on_source(MigrationState *ms)
{
    if (!ms->rp_state.rp_thread_created) {
        return false;
    }

    trace_migration_return_path_end_before();

    /*
     * If this is a normal exit then the destination will send a SHUT
     * and the rp_thread will exit, however if there's an error we
     * need to cause it to exit. shutdown(2), if we have it, will
     * cause it to unblock if it's stuck waiting for the destination.
     */
    WITH_QEMU_LOCK_GUARD(&ms->qemu_file_lock) {
        if (migrate_has_error(ms) && ms->rp_state.from_dst_file) {
            qemu_file_shutdown(ms->rp_state.from_dst_file);
        }
    }

    qemu_thread_join(&ms->rp_state.rp_thread);
    ms->rp_state.rp_thread_created = false;
    migration_release_dst_files(ms);
    trace_migration_return_path_end_after();

    /* Return path will persist the error in MigrationState when quit */
    return migrate_has_error(ms);
}

static inline void
migration_wait_main_channel(MigrationState *ms)
{
    /* Wait until one PONG message received */
    qemu_sem_wait(&ms->rp_state.rp_pong_acks);
}

/*
 * Switch from normal iteration to postcopy
 * Returns non-0 on error
 */
static int postcopy_start(MigrationState *ms, Error **errp)
{
    int ret;
    QIOChannelBuffer *bioc;
    QEMUFile *fb;

    /*
     * Now we're 100% sure to switch to postcopy, so JSON writer won't be
     * useful anymore.  Free the resources early if it is there.  Clearing
     * the vmdesc also means any follow up vmstate_save()s will start to
     * skip all JSON operations, which can shrink postcopy downtime.
     */
    migration_cleanup_json_writer(ms);

    if (migrate_postcopy_preempt()) {
        migration_wait_main_channel(ms);
        if (postcopy_preempt_establish_channel(ms)) {
            if (ms->state != MIGRATION_STATUS_CANCELLING) {
                migrate_set_state(&ms->state, ms->state,
                                  MIGRATION_STATUS_FAILED);
            }
            error_setg(errp, "%s: Failed to establish preempt channel",
                       __func__);
            return -1;
        }
    }

    if (!qemu_savevm_state_postcopy_prepare(ms->to_dst_file, errp)) {
        return -1;
    }

    trace_postcopy_start();
    bql_lock();
    trace_postcopy_start_set_run();

    ret = migration_stop_vm(ms, RUN_STATE_FINISH_MIGRATE);
    if (ret < 0) {
        error_setg_errno(errp, -ret, "%s: Failed to stop the VM", __func__);
        goto fail;
    }

    if (!migration_switchover_start(ms, errp)) {
        goto fail;
    }

    /*
     * Cause any non-postcopiable, but iterative devices to
     * send out their final data.
     */
    ret = qemu_savevm_state_complete_precopy_iterable(ms->to_dst_file, true);
    if (ret) {
        error_setg(errp, "Postcopy save non-postcopiable iterables failed");
        goto fail;
    }

    /*
     * in Finish migrate and with the io-lock held everything should
     * be quiet, but we've potentially still got dirty pages and we
     * need to tell the destination to throw any pages it's already received
     * that are dirty
     */
    if (migrate_postcopy_ram()) {
        ram_postcopy_send_discard_bitmap(ms);
    }

    if (migrate_postcopy_ram()) {
        /* Ping just for debugging, helps line traces up */
        qemu_savevm_send_ping(ms->to_dst_file, 2);
    }

    /*
     * While loading the device state we may trigger page transfer
     * requests and the fd must be free to process those, and thus
     * the destination must read the whole device state off the fd before
     * it starts processing it.  Unfortunately the ad-hoc migration format
     * doesn't allow the destination to know the size to read without fully
     * parsing it through each devices load-state code (especially the open
     * coded devices that use get/put).
     * So we wrap the device state up in a package with a length at the start;
     * to do this we use a qemu_buf to hold the whole of the device state.
     */
    bioc = qio_channel_buffer_new(4096);
    qio_channel_set_name(QIO_CHANNEL(bioc), "migration-postcopy-buffer");
    fb = qemu_file_new_output(QIO_CHANNEL(bioc));
    object_unref(OBJECT(bioc));

    /*
     * Make sure the receiver can get incoming pages before we send the rest
     * of the state
     */
    qemu_savevm_send_postcopy_listen(fb);

    ret = qemu_savevm_state_non_iterable(fb, errp);
    if (ret) {
        error_prepend(errp, "Postcopy save non-iterable states failed: ");
        goto fail_closefb;
    }

    if (migrate_postcopy_ram()) {
        qemu_savevm_send_ping(fb, 3);
    }
    if (ms->rp_state.rp_thread_created) {
        /*
        * This ping will tell us that all non-postcopiable device state has been
        * successfully loaded and the destination is about to start. When
        * response is received, it will trigger transition from POSTCOPY_DEVICE
        * to POSTCOPY_ACTIVE state.
        */
        qemu_savevm_send_ping(fb, QEMU_VM_PING_PACKAGED_LOADED);
    }

    qemu_savevm_send_postcopy_run(fb);

    /* <><> end of stuff going into the package */

    /* Last point of recovery; as soon as we send the package the destination
     * can open devices and potentially start running.
     * Lets just check again we've not got any errors.
     */
    ret = qemu_file_get_error(ms->to_dst_file);
    if (ret) {
        error_setg(errp, "postcopy_start: Migration stream errored (pre package)");
        goto fail_closefb;
    }

    /* Now send that blob */
    if (qemu_savevm_send_packaged(ms->to_dst_file, bioc->data, bioc->usage)) {
        error_setg(errp, "%s: Failed to send packaged data", __func__);
        goto fail_closefb;
    }
    qemu_fclose(fb);

    /* Send a notify to give a chance for anything that needs to happen
     * at the transition to postcopy and after the device state; in particular
     * spice needs to trigger a transition now
     */
    migration_call_notifiers(MIG_EVENT_POSTCOPY_START, NULL);

    migration_downtime_end(ms);

    if (migrate_postcopy_ram()) {
        /*
         * Although this ping is just for debug, it could potentially be
         * used for getting a better measurement of downtime at the source.
         */
        qemu_savevm_send_ping(ms->to_dst_file, 4);
    }

    if (migrate_release_ram()) {
        ram_postcopy_migrated_memory_release(ms);
    }

    ret = qemu_file_get_error(ms->to_dst_file);
    if (ret) {
        error_setg_errno(errp, -ret, "postcopy_start: Migration stream error");
        goto fail;
    }
    trace_postcopy_preempt_enabled(migrate_postcopy_preempt());

    /*
     * Now postcopy officially started, switch to postcopy bandwidth that
     * user specified.
     */
    migration_rate_set(migrate_max_postcopy_bandwidth());

    /*
     * Now, switchover looks all fine, switching to POSTCOPY_DEVICE, or
     * directly to POSTCOPY_ACTIVE if there is no return path.
     */
    migrate_set_state(&ms->state, MIGRATION_STATUS_DEVICE,
                      ms->rp_state.rp_thread_created ?
                      MIGRATION_STATUS_POSTCOPY_DEVICE :
                      MIGRATION_STATUS_POSTCOPY_ACTIVE);

    bql_unlock();

    return ret;

fail_closefb:
    qemu_fclose(fb);
fail:
    if (ms->state != MIGRATION_STATUS_CANCELLING) {
        migrate_set_state(&ms->state, ms->state, MIGRATION_STATUS_FAILED);
    }
    bql_unlock();
    return -1;
}

/**
 * @migration_switchover_prepare: Start VM switchover procedure
 *
 * @s: The migration state object pointer
 *
 * Prepares for the switchover, depending on "pause-before-switchover"
 * capability.
 *
 * If cap set, state machine goes like:
 *   [postcopy-]active -> pre-switchover -> device
 *
 * If cap not set:
 *   [postcopy-]active -> device
 *
 * Returns: true on success, false on interruptions.
 */
static bool migration_switchover_prepare(MigrationState *s)
{
    /* Concurrent cancellation?  Quit */
    if (s->state == MIGRATION_STATUS_CANCELLING) {
        return false;
    }

    /*
     * No matter precopy or postcopy, since we still hold BQL it must not
     * change concurrently to CANCELLING, so it must be either ACTIVE or
     * POSTCOPY_ACTIVE.
     */
    assert(migration_is_active());

    /* If the pre stage not requested, directly switch to DEVICE */
    if (!migrate_pause_before_switchover()) {
        migrate_set_state(&s->state, s->state, MIGRATION_STATUS_DEVICE);
        return true;
    }

    /*
     * Since leaving this state is not atomic with setting the event
     * it's possible that someone could have issued multiple migrate_continue
     * and the event is incorrectly set at this point so reset it.
     */
    qemu_event_reset(&s->pause_event);

    /* Update [POSTCOPY_]ACTIVE to PRE_SWITCHOVER */
    migrate_set_state(&s->state, s->state, MIGRATION_STATUS_PRE_SWITCHOVER);
    bql_unlock();

    qemu_event_wait(&s->pause_event);

    bql_lock();
    /*
     * After BQL released and retaken, the state can be CANCELLING if it
     * happend during sem_wait().. Only change the state if it's still
     * pre-switchover.
     */
    migrate_set_state(&s->state, MIGRATION_STATUS_PRE_SWITCHOVER,
                      MIGRATION_STATUS_DEVICE);

    return s->state == MIGRATION_STATUS_DEVICE;
}

static bool migration_switchover_start(MigrationState *s, Error **errp)
{
    ERRP_GUARD();

    if (!migration_switchover_prepare(s)) {
        error_setg(errp, "Switchover is interrupted");
        return false;
    }

    /* Inactivate disks except in COLO */
    if (!migrate_colo()) {
        /*
         * Inactivate before sending QEMU_VM_EOF so that the
         * bdrv_activate_all() on the other end won't fail.
         */
        if (!migration_block_inactivate()) {
            error_setg(errp, "Block inactivate failed during switchover");
            return false;
        }
    }

    migration_rate_set(RATE_LIMIT_DISABLED);

    precopy_notify_complete();

    qemu_savevm_maybe_send_switchover_start(s->to_dst_file);

    return true;
}

static int migration_completion_precopy(MigrationState *s)
{
    int ret;

    bql_lock();

    if (!migrate_mode_is_cpr()) {
        ret = migration_stop_vm(s, RUN_STATE_FINISH_MIGRATE);
        if (ret < 0) {
            goto out_unlock;
        }
    }

    if (!migration_switchover_start(s, NULL)) {
        ret = -EFAULT;
        goto out_unlock;
    }

    ret = qemu_savevm_state_complete_precopy(s);
out_unlock:
    bql_unlock();
    return ret;
}

static void migration_completion_postcopy(MigrationState *s)
{
    trace_migration_completion_postcopy_end();

    bql_lock();
    qemu_savevm_state_complete_postcopy(s->to_dst_file);
    bql_unlock();

    /*
     * Shutdown the postcopy fast path thread.  This is only needed when dest
     * QEMU binary is old (7.1/7.2).  QEMU 8.0+ doesn't need this.
     */
    if (migrate_postcopy_preempt() && s->preempt_pre_7_2) {
        postcopy_preempt_shutdown_file(s);
    }

    trace_migration_completion_postcopy_end_after_complete();
}

/**
 * migration_completion: Used by migration_thread when there's not much left.
 *   The caller 'breaks' the loop when this returns.
 *
 * @s: Current migration state
 */
static void migration_completion(MigrationState *s)
{
    int ret = 0;
    Error *local_err = NULL;

    if (s->state == MIGRATION_STATUS_ACTIVE) {
        ret = migration_completion_precopy(s);
    } else if (s->state == MIGRATION_STATUS_POSTCOPY_ACTIVE) {
        migration_completion_postcopy(s);
    } else {
        ret = -1;
    }

    if (ret < 0) {
        goto fail;
    }

    if (close_return_path_on_source(s)) {
        goto fail;
    }

    if (qemu_file_get_error(s->to_dst_file)) {
        trace_migration_completion_file_err();
        goto fail;
    }

    if (migrate_colo() && s->state == MIGRATION_STATUS_DEVICE) {
        /* COLO does not support postcopy */
        migrate_set_state(&s->state, MIGRATION_STATUS_DEVICE,
                          MIGRATION_STATUS_COLO);
    } else {
        migration_completion_end(s);
    }

    return;

fail:
    if (qemu_file_get_error_obj(s->to_dst_file, &local_err)) {
        migrate_error_propagate(s, local_err);
    } else if (ret) {
        error_setg_errno(&local_err, -ret, "Error in migration completion");
        migrate_error_propagate(s, local_err);
    }

    if (s->state != MIGRATION_STATUS_CANCELLING) {
        migrate_set_state(&s->state, s->state, MIGRATION_STATUS_FAILED);
    }
}

/**
 * bg_migration_completion: Used by bg_migration_thread when after all the
 *   RAM has been saved. The caller 'breaks' the loop when this returns.
 *
 * @s: Current migration state
 */
static void bg_migration_completion(MigrationState *s)
{
    int current_active_state = s->state;

    if (s->state == MIGRATION_STATUS_ACTIVE) {
        /*
         * By this moment we have RAM content saved into the migration stream.
         * The next step is to flush the non-RAM content (device state)
         * right after the ram content. The device state has been stored into
         * the temporary buffer before RAM saving started.
         */
        qemu_put_buffer(s->to_dst_file, s->bioc->data, s->bioc->usage);
        qemu_fflush(s->to_dst_file);
    } else if (s->state == MIGRATION_STATUS_CANCELLING) {
        return;
    }

    if (qemu_file_get_error(s->to_dst_file)) {
        trace_migration_completion_file_err();
        goto fail;
    }

    migration_completion_end(s);
    return;

fail:
    migrate_set_state(&s->state, current_active_state,
                      MIGRATION_STATUS_FAILED);
}

typedef enum MigThrError {
    /* No error detected */
    MIG_THR_ERR_NONE = 0,
    /* Detected error, but resumed successfully */
    MIG_THR_ERR_RECOVERED = 1,
    /* Detected fatal error, need to exit */
    MIG_THR_ERR_FATAL = 2,
} MigThrError;

static int postcopy_resume_handshake(MigrationState *s)
{
    qemu_savevm_send_postcopy_resume(s->to_dst_file);

    while (s->state == MIGRATION_STATUS_POSTCOPY_RECOVER) {
        if (migration_rp_wait(s)) {
            return -1;
        }
    }

    if (s->state == MIGRATION_STATUS_POSTCOPY_ACTIVE) {
        return 0;
    }

    return -1;
}

/* Return zero if success, or <0 for error */
static int postcopy_do_resume(MigrationState *s)
{
    int ret;

    /*
     * Call all the resume_prepare() hooks, so that modules can be
     * ready for the migration resume.
     */
    ret = qemu_savevm_state_resume_prepare(s);
    if (ret) {
        error_report("%s: resume_prepare() failure detected: %d",
                     __func__, ret);
        return ret;
    }

    /*
     * If preempt is enabled, re-establish the preempt channel.  Note that
     * we do it after resume prepare to make sure the main channel will be
     * created before the preempt channel.  E.g. with weak network, the
     * dest QEMU may get messed up with the preempt and main channels on
     * the order of connection setup.  This guarantees the correct order.
     */
    ret = postcopy_preempt_establish_channel(s);
    if (ret) {
        error_report("%s: postcopy_preempt_establish_channel(): %d",
                     __func__, ret);
        return ret;
    }

    /*
     * Last handshake with destination on the resume (destination will
     * switch to postcopy-active afterwards)
     */
    ret = postcopy_resume_handshake(s);
    if (ret) {
        error_report("%s: handshake failed: %d", __func__, ret);
        return ret;
    }

    return 0;
}

/*
 * We don't return until we are in a safe state to continue current
 * postcopy migration.  Returns MIG_THR_ERR_RECOVERED if recovered, or
 * MIG_THR_ERR_FATAL if unrecovery failure happened.
 */
static MigThrError postcopy_pause(MigrationState *s)
{
    assert(s->state == MIGRATION_STATUS_POSTCOPY_ACTIVE);

    while (true) {
        QEMUFile *file;

        /*
         * We're already pausing, so ignore any errors on the return
         * path and just wait for the thread to finish. It will be
         * re-created when we resume.
         */
        close_return_path_on_source(s);

        /*
         * Current channel is possibly broken. Release it.  Note that this is
         * guaranteed even without lock because to_dst_file should only be
         * modified by the migration thread.  That also guarantees that the
         * unregister of yank is safe too without the lock.  It should be safe
         * even to be within the qemu_file_lock, but we didn't do that to avoid
         * taking more mutex (yank_lock) within qemu_file_lock.  TL;DR: we make
         * the qemu_file_lock critical section as small as possible.
         */
        assert(s->to_dst_file);
        migration_ioc_unregister_yank_from_file(s->to_dst_file);
        qemu_mutex_lock(&s->qemu_file_lock);
        file = s->to_dst_file;
        s->to_dst_file = NULL;
        qemu_mutex_unlock(&s->qemu_file_lock);

        qemu_file_shutdown(file);
        qemu_fclose(file);

        migrate_set_state(&s->state, s->state,
                          MIGRATION_STATUS_POSTCOPY_PAUSED);

        error_report("Detected IO failure for postcopy. "
                     "Migration paused.");

        /*
         * We wait until things fixed up. Then someone will setup the
         * status back for us.
         */
        do {
            qemu_sem_wait(&s->postcopy_pause_sem);
        } while (postcopy_is_paused(s->state));

        if (s->state == MIGRATION_STATUS_POSTCOPY_RECOVER) {
            /* Woken up by a recover procedure. Give it a shot */

            /* Do the resume logic */
            if (postcopy_do_resume(s) == 0) {
                /* Let's continue! */
                trace_postcopy_pause_continued();
                return MIG_THR_ERR_RECOVERED;
            } else {
                /*
                 * Something wrong happened during the recovery, let's
                 * pause again. Pause is always better than throwing
                 * data away.
                 */
                continue;
            }
        } else {
            /* This is not right... Time to quit. */
            return MIG_THR_ERR_FATAL;
        }
    }
}

void migration_file_set_error(int ret, Error *err)
{
    MigrationState *s = current_migration;

    WITH_QEMU_LOCK_GUARD(&s->qemu_file_lock) {
        if (s->to_dst_file) {
            qemu_file_set_error_obj(s->to_dst_file, ret, err);
        } else if (err) {
            error_report_err(err);
        }
    }
}

static MigThrError migration_detect_error(MigrationState *s)
{
    int ret;
    int state = s->state;
    Error *local_error = NULL;

    if (state == MIGRATION_STATUS_CANCELLING ||
        state == MIGRATION_STATUS_CANCELLED) {
        /* End the migration, but don't set the state to failed */
        return MIG_THR_ERR_FATAL;
    }

    /*
     * Try to detect any file errors.  Note that postcopy_qemufile_src will
     * be NULL when postcopy preempt is not enabled.
     */
    ret = qemu_file_get_error_obj_any(s->to_dst_file,
                                      s->postcopy_qemufile_src,
                                      &local_error);
    if (!ret) {
        /* Everything is fine */
        assert(!local_error);
        return MIG_THR_ERR_NONE;
    }

    if (local_error) {
        migrate_error_propagate(s, local_error);
    }

    if (state == MIGRATION_STATUS_POSTCOPY_ACTIVE && ret) {
        /*
         * For postcopy, we allow the network to be down for a
         * while. After that, it can be continued by a
         * recovery phase.
         */
        return postcopy_pause(s);
    } else {
        /*
         * For precopy (or postcopy with error outside IO, or before dest
         * starts), we fail with no time.
         */
        migrate_set_state(&s->state, state, MIGRATION_STATUS_FAILED);
        trace_migration_thread_file_err();

        /* Time to stop the migration, now. */
        return MIG_THR_ERR_FATAL;
    }
}

static void migration_completion_end(MigrationState *s)
{
    uint64_t bytes = migration_transferred_bytes();
    int64_t end_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME);
    int64_t transfer_time;

    /*
     * Take the BQL here so that query-migrate on the QMP thread sees:
     * - atomic update of s->total_time and s->mbps;
     * - correct ordering of s->mbps update vs. s->state;
     */
    bql_lock();
    migration_downtime_end(s);
    s->total_time = end_time - s->start_time;
    transfer_time = s->total_time - s->setup_time;
    if (transfer_time) {
        s->mbps = ((double) bytes * 8.0) / transfer_time / 1000;
    }

    migrate_set_state(&s->state, s->state,
                      MIGRATION_STATUS_COMPLETED);
    bql_unlock();
}

static void update_iteration_initial_status(MigrationState *s)
{
    /*
     * Update these three fields at the same time to avoid mismatch info lead
     * wrong speed calculation.
     */
    s->iteration_start_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME);
    s->iteration_initial_bytes = migration_transferred_bytes();
    s->iteration_initial_pages = ram_get_total_transferred_pages();
}

static void migration_update_counters(MigrationState *s,
                                      int64_t current_time)
{
    uint64_t transferred, transferred_pages, time_spent;
    uint64_t current_bytes; /* bytes transferred since the beginning */
    uint64_t switchover_bw;
    /* Expected bandwidth when switching over to destination QEMU */
    double expected_bw_per_ms;
    double bandwidth;

    if (current_time < s->iteration_start_time + BUFFER_DELAY) {
        return;
    }

    switchover_bw = migrate_avail_switchover_bandwidth();
    current_bytes = migration_transferred_bytes();
    transferred = current_bytes - s->iteration_initial_bytes;
    time_spent = current_time - s->iteration_start_time;
    bandwidth = (double)transferred / time_spent;

    if (switchover_bw) {
        /*
         * If the user specified a switchover bandwidth, let's trust the
         * user so that can be more accurate than what we estimated.
         */
        expected_bw_per_ms = switchover_bw / 1000;
    } else {
        /* If the user doesn't specify bandwidth, we use the estimated */
        expected_bw_per_ms = bandwidth;
    }

    s->threshold_size = expected_bw_per_ms * migrate_downtime_limit();

    s->mbps = (((double) transferred * 8.0) /
               ((double) time_spent / 1000.0)) / 1000.0 / 1000.0;

    transferred_pages = ram_get_total_transferred_pages() -
                            s->iteration_initial_pages;
    s->pages_per_second = (double) transferred_pages /
                             (((double) time_spent / 1000.0));

    /*
     * if we haven't sent anything, we don't want to
     * recalculate. 10000 is a small enough number for our purposes
     */
    if (qatomic_read(&mig_stats.dirty_pages_rate) &&
        transferred > 10000) {
        s->expected_downtime =
            qatomic_read(&mig_stats.dirty_bytes_last_sync) / expected_bw_per_ms;
    }

    migration_rate_reset();

    update_iteration_initial_status(s);

    trace_migrate_transferred(transferred, time_spent,
                              /* Both in unit bytes/ms */
                              bandwidth, switchover_bw / 1000,
                              s->threshold_size);
}

static bool migration_can_switchover(MigrationState *s)
{
    if (!migrate_switchover_ack()) {
        return true;
    }

    /* No reason to wait for switchover ACK if VM is stopped */
    if (!runstate_is_running()) {
        return true;
    }

    return s->switchover_acked;
}

/* Migration thread iteration status */
typedef enum {
    MIG_ITERATE_RESUME,         /* Resume current iteration */
    MIG_ITERATE_SKIP,           /* Skip current iteration */
    MIG_ITERATE_BREAK,          /* Break the loop */
} MigIterateState;

/*
 * Return true if continue to the next iteration directly, false
 * otherwise.
 */
static MigIterateState migration_iteration_run(MigrationState *s)
{
    uint64_t must_precopy, can_postcopy, pending_size;
    Error *local_err = NULL;
    bool in_postcopy = (s->state == MIGRATION_STATUS_POSTCOPY_DEVICE ||
                        s->state == MIGRATION_STATUS_POSTCOPY_ACTIVE);
    bool can_switchover = migration_can_switchover(s);
    bool complete_ready;

    /* Fast path - get the estimated amount of pending data */
    qemu_savevm_state_pending_estimate(&must_precopy, &can_postcopy);
    pending_size = must_precopy + can_postcopy;
    trace_migrate_pending_estimate(pending_size, must_precopy, can_postcopy);

    if (in_postcopy) {
        /*
         * Iterate in postcopy until all pending data flushed.  Note that
         * postcopy completion doesn't rely on can_switchover, because when
         * POSTCOPY_ACTIVE it means switchover already happened.
         */
        complete_ready = !pending_size;
        if (s->state == MIGRATION_STATUS_POSTCOPY_DEVICE &&
            (s->postcopy_package_loaded || complete_ready)) {
            /*
             * If package has been loaded, the event is set and we will
             * immediatelly transition to POSTCOPY_ACTIVE. If we are ready for
             * completion, we need to wait for destination to load the postcopy
             * package before actually completing.
             */
            qemu_event_wait(&s->postcopy_package_loaded_event);
            migrate_set_state(&s->state, MIGRATION_STATUS_POSTCOPY_DEVICE,
                              MIGRATION_STATUS_POSTCOPY_ACTIVE);
        }
    } else {
        /*
         * Exact pending reporting is only needed for precopy.  Taking RAM
         * as example, there'll be no extra dirty information after
         * postcopy started, so ESTIMATE should always match with EXACT
         * during postcopy phase.
         */
        if (pending_size < s->threshold_size) {
            qemu_savevm_state_pending_exact(&must_precopy, &can_postcopy);
            pending_size = must_precopy + can_postcopy;
            trace_migrate_pending_exact(pending_size, must_precopy,
                                        can_postcopy);
        }

        /* Should we switch to postcopy now? */
        if (must_precopy <= s->threshold_size &&
            can_switchover && qatomic_read(&s->start_postcopy)) {
            if (postcopy_start(s, &local_err)) {
                migrate_error_propagate(s, error_copy(local_err));
                error_report_err(local_err);
            }
            return MIG_ITERATE_SKIP;
        }

        /*
         * For precopy, migration can complete only if:
         *
         * (1) Switchover is acknowledged by destination
         * (2) Pending size is no more than the threshold specified
         *     (which was calculated from expected downtime)
         */
        complete_ready = can_switchover && (pending_size <= s->threshold_size);
    }

    if (complete_ready) {
        trace_migration_thread_low_pending(pending_size);
        migration_completion(s);
        return MIG_ITERATE_BREAK;
    }

    /* Just another iteration step */
    qemu_savevm_state_iterate(s->to_dst_file, in_postcopy);
    return MIG_ITERATE_RESUME;
}

static void migration_iteration_finish(MigrationState *s)
{
    Error *local_err = NULL;

    bql_lock();

    /*
     * If we enabled cpu throttling for auto-converge, turn it off.
     * Stopping CPU throttle should be serialized by BQL to avoid
     * racing for the throttle_dirty_sync_timer.
     */
    if (migrate_auto_converge()) {
        cpu_throttle_stop();
    }

    switch (s->state) {
    case MIGRATION_STATUS_COMPLETED:
        runstate_set(RUN_STATE_POSTMIGRATE);
        break;
    case MIGRATION_STATUS_COLO:
        assert(migrate_colo());
        migrate_start_colo_process(s);
        s->vm_old_state = RUN_STATE_RUNNING;
        /* Fallthrough */
    case MIGRATION_STATUS_FAILED:
    case MIGRATION_STATUS_CANCELLED:
    case MIGRATION_STATUS_CANCELLING:
        if (!migration_block_activate(&local_err)) {
            /*
            * Re-activate the block drives if they're inactivated.
            *
            * If it fails (e.g. in case of a split brain, where dest QEMU
            * might have taken some of the drive locks and running!), do
            * not start VM, instead wait for mgmt to decide the next step.
            *
            * If dest already started, it means dest QEMU should contain
            * all the data it needs and it properly owns all the drive
            * locks.  Then even if src QEMU got a FAILED in migration, it
            * normally should mean we should treat the migration as
            * COMPLETED.
            *
            * NOTE: it's not safe anymore to start VM on src now even if
            * dest would release the drive locks.  It's because as long as
            * dest started running then only dest QEMU's RAM is consistent
            * with the shared storage.
            */
            error_free(local_err);
            break;
        }

        /*
         * Notify FAILED before starting VM, so that devices can invoke
         * necessary fallbacks before vCPUs run again.
         */
        migration_call_notifiers(MIG_EVENT_FAILED, NULL);

        if (runstate_is_live(s->vm_old_state)) {
            if (!runstate_check(RUN_STATE_SHUTDOWN)) {
                vm_start();
            }
        } else {
            if (runstate_check(RUN_STATE_FINISH_MIGRATE)) {
                runstate_set(s->vm_old_state);
            }
        }
        break;

    default:
        /* Should not reach here, but if so, forgive the VM. */
        error_report("%s: Unknown ending state %d", __func__, s->state);
        break;
    }

    migration_bh_schedule(migration_cleanup_bh, s);
    bql_unlock();
}

static void bg_migration_iteration_finish(MigrationState *s)
{
    /*
     * Stop tracking RAM writes - un-protect memory, un-register UFFD
     * memory ranges, flush kernel wait queues and wake up threads
     * waiting for write fault to be resolved.
     */
    ram_write_tracking_stop();

    bql_lock();
    switch (s->state) {
    case MIGRATION_STATUS_COMPLETED:
    case MIGRATION_STATUS_ACTIVE:
    case MIGRATION_STATUS_FAILED:
    case MIGRATION_STATUS_CANCELLED:
    case MIGRATION_STATUS_CANCELLING:
        break;

    default:
        /* Should not reach here, but if so, forgive the VM. */
        error_report("%s: Unknown ending state %d", __func__, s->state);
        break;
    }

    migration_bh_schedule(migration_cleanup_bh, s);
    bql_unlock();
}

/*
 * Return true if continue to the next iteration directly, false
 * otherwise.
 */
static MigIterateState bg_migration_iteration_run(MigrationState *s)
{
    int res;

    res = qemu_savevm_state_iterate(s->to_dst_file, false);
    if (res > 0) {
        bg_migration_completion(s);
        return MIG_ITERATE_BREAK;
    }

    return MIG_ITERATE_RESUME;
}

void migration_make_urgent_request(void)
{
    qemu_sem_post(&migrate_get_current()->rate_limit_sem);
}

void migration_consume_urgent_request(void)
{
    qemu_sem_wait(&migrate_get_current()->rate_limit_sem);
}

/* Returns true if the rate limiting was broken by an urgent request */
bool migration_rate_limit(void)
{
    int64_t now = qemu_clock_get_ms(QEMU_CLOCK_REALTIME);
    MigrationState *s = migrate_get_current();

    bool urgent = false;
    migration_update_counters(s, now);
    if (migration_rate_exceeded(s->to_dst_file)) {

        if (qemu_file_get_error(s->to_dst_file)) {
            return false;
        }
        /*
         * Wait for a delay to do rate limiting OR
         * something urgent to post the semaphore.
         */
        int ms = s->iteration_start_time + BUFFER_DELAY - now;
        trace_migration_rate_limit_pre(ms);
        if (qemu_sem_timedwait(&s->rate_limit_sem, ms) == 0) {
            /*
             * We were woken by one or more urgent things but
             * the timedwait will have consumed one of them.
             * The service routine for the urgent wake will dec
             * the semaphore itself for each item it consumes,
             * so add this one we just eat back.
             */
            qemu_sem_post(&s->rate_limit_sem);
            urgent = true;
        }
        trace_migration_rate_limit_post(urgent);
    }
    return urgent;
}

/*
 * if failover devices are present, wait they are completely
 * unplugged
 */

static void qemu_savevm_wait_unplug(MigrationState *s, int old_state,
                                    int new_state)
{
    if (qemu_savevm_state_guest_unplug_pending()) {
        migrate_set_state(&s->state, old_state, MIGRATION_STATUS_WAIT_UNPLUG);

        while (s->state == MIGRATION_STATUS_WAIT_UNPLUG &&
               qemu_savevm_state_guest_unplug_pending()) {
            qemu_sem_timedwait(&s->wait_unplug_sem, 250);
        }
        if (s->state != MIGRATION_STATUS_WAIT_UNPLUG) {
            int timeout = 120; /* 30 seconds */
            /*
             * migration has been canceled
             * but as we have started an unplug we must wait the end
             * to be able to plug back the card
             */
            while (timeout-- && qemu_savevm_state_guest_unplug_pending()) {
                qemu_sem_timedwait(&s->wait_unplug_sem, 250);
            }
            if (qemu_savevm_state_guest_unplug_pending() &&
                !qtest_enabled()) {
                warn_report("migration: partially unplugged device on "
                            "failure");
            }
        }

        migrate_set_state(&s->state, MIGRATION_STATUS_WAIT_UNPLUG, new_state);
    } else {
        migrate_set_state(&s->state, old_state, new_state);
    }
}

/*
 * Master migration thread on the source VM.
 * It drives the migration and pumps the data down the outgoing channel.
 */
static void *migration_thread(void *opaque)
{
    MigrationState *s = opaque;
    int64_t setup_start = qemu_clock_get_ms(QEMU_CLOCK_HOST);
    MigThrError thr_error;
    bool urgent = false;
    Error *local_err = NULL;
    int ret;

    rcu_register_thread();

    update_iteration_initial_status(s);

    if (!multifd_send_setup()) {
        goto out;
    }

    bql_lock();
    qemu_savevm_state_header(s->to_dst_file);
    bql_unlock();

    /*
     * If we opened the return path, we need to make sure dst has it
     * opened as well.
     */
    if (s->rp_state.rp_thread_created) {
        /* Now tell the dest that it should open its end so it can reply */
        qemu_savevm_send_open_return_path(s->to_dst_file);

        /* And do a ping that will make stuff easier to debug */
        qemu_savevm_send_ping(s->to_dst_file, 1);
    }

    if (migrate_postcopy()) {
        /*
         * Tell the destination that we *might* want to do postcopy later;
         * if the other end can't do postcopy it should fail now, nice and
         * early.
         */
        qemu_savevm_send_postcopy_advise(s->to_dst_file);
    }

    if (migrate_colo()) {
        /* Notify migration destination that we enable COLO */
        qemu_savevm_send_colo_enable(s->to_dst_file);
    }

    if (migrate_auto_converge()) {
        /* Start RAMBlock dirty bitmap sync timer */
        cpu_throttle_dirty_sync_timer(true);
    }

    bql_lock();
    ret = qemu_savevm_state_do_setup(s->to_dst_file, &local_err);
    bql_unlock();

    qemu_savevm_wait_unplug(s, MIGRATION_STATUS_SETUP,
                               MIGRATION_STATUS_ACTIVE);

    /*
     * Handle SETUP failures after waiting for virtio-net-failover
     * devices to unplug. This to preserve migration state transitions.
     */
    if (ret) {
        migrate_error_propagate(s, local_err);
        migrate_set_state(&s->state, MIGRATION_STATUS_ACTIVE,
                          MIGRATION_STATUS_FAILED);
        goto out;
    }

    s->setup_time = qemu_clock_get_ms(QEMU_CLOCK_HOST) - setup_start;

    trace_migration_thread_setup_complete();

    while (migration_is_active()) {
        if (urgent || !migration_rate_exceeded(s->to_dst_file)) {
            MigIterateState iter_state = migration_iteration_run(s);
            if (iter_state == MIG_ITERATE_SKIP) {
                continue;
            } else if (iter_state == MIG_ITERATE_BREAK) {
                break;
            }
        }

        /*
         * Try to detect any kind of failures, and see whether we
         * should stop the migration now.
         */
        thr_error = migration_detect_error(s);
        if (thr_error == MIG_THR_ERR_FATAL) {
            /* Stop migration */
            break;
        } else if (thr_error == MIG_THR_ERR_RECOVERED) {
            /*
             * Just recovered from a e.g. network failure, reset all
             * the local variables. This is important to avoid
             * breaking transferred_bytes and bandwidth calculation
             */
            update_iteration_initial_status(s);
        }

        urgent = migration_rate_limit();
    }

out:
    trace_migration_thread_after_loop();
    migration_iteration_finish(s);
    object_unref(OBJECT(s));
    rcu_unregister_thread();
    return NULL;
}

static void bg_migration_vm_start_bh(void *opaque)
{
    MigrationState *s = opaque;

    vm_resume(s->vm_old_state);
    migration_downtime_end(s);
}

/**
 * Background snapshot thread, based on live migration code.
 * This is an alternative implementation of live migration mechanism
 * introduced specifically to support background snapshots.
 *
 * It takes advantage of userfault_fd write protection mechanism introduced
 * in v5.7 kernel. Compared to existing dirty page logging migration much
 * lesser stream traffic is produced resulting in smaller snapshot images,
 * simply cause of no page duplicates can get into the stream.
 *
 * Another key point is that generated vmstate stream reflects machine state
 * 'frozen' at the beginning of snapshot creation compared to dirty page logging
 * mechanism, which effectively results in that saved snapshot is the state of VM
 * at the end of the process.
 */
static void *bg_migration_thread(void *opaque)
{
    MigrationState *s = opaque;
    int64_t setup_start;
    MigThrError thr_error;
    QEMUFile *fb;
    Error *local_err = NULL;
    int ret;

    rcu_register_thread();

    migration_rate_set(RATE_LIMIT_DISABLED);

    setup_start = qemu_clock_get_ms(QEMU_CLOCK_HOST);
    /*
     * We want to save vmstate for the moment when migration has been
     * initiated but also we want to save RAM content while VM is running.
     * The RAM content should appear first in the vmstate. So, we first
     * stash the non-RAM part of the vmstate to the temporary buffer,
     * then write RAM part of the vmstate to the migration stream
     * with vCPUs running and, finally, write stashed non-RAM part of
     * the vmstate from the buffer to the migration stream.
     */
    s->bioc = qio_channel_buffer_new(512 * 1024);
    qio_channel_set_name(QIO_CHANNEL(s->bioc), "vmstate-buffer");
    fb = qemu_file_new_output(QIO_CHANNEL(s->bioc));
    object_unref(OBJECT(s->bioc));

    update_iteration_initial_status(s);

    /*
     * Prepare for tracking memory writes with UFFD-WP - populate
     * RAM pages before protecting.
     */
#ifdef __linux__
    ram_write_tracking_prepare();
#endif

    bql_lock();
    qemu_savevm_state_header(s->to_dst_file);
    ret = qemu_savevm_state_do_setup(s->to_dst_file, &local_err);
    bql_unlock();

    qemu_savevm_wait_unplug(s, MIGRATION_STATUS_SETUP,
                               MIGRATION_STATUS_ACTIVE);

    /*
     * Handle SETUP failures after waiting for virtio-net-failover
     * devices to unplug. This to preserve migration state transitions.
     */
    if (ret) {
        goto fail;
    }

    s->setup_time = qemu_clock_get_ms(QEMU_CLOCK_HOST) - setup_start;

    trace_migration_thread_setup_complete();

    bql_lock();

    if (migration_stop_vm(s, RUN_STATE_PAUSED)) {
        error_setg(&local_err, "Failed to stop the VM");
        goto fail_with_bql;
    }

    if (qemu_savevm_state_non_iterable(fb, &local_err)) {
        error_prepend(&local_err, "Failed to save non-iterable devices ");
        goto fail_with_bql;
    }

    qemu_savevm_state_end_precopy(s, fb);

    /*
     * Since we are going to get non-iterable state data directly
     * from s->bioc->data, explicit flush is needed here.
     */
    qemu_fflush(fb);

    /* Now initialize UFFD context and start tracking RAM writes */
    if (ram_write_tracking_start()) {
        error_setg(&local_err, "Failed to start write tracking");
        goto fail_with_bql;
    }

    /*
     * Start VM from BH handler to avoid write-fault lock here.
     * UFFD-WP protection for the whole RAM is already enabled so
     * calling VM state change notifiers from vm_start() would initiate
     * writes to virtio VQs memory which is in write-protected region.
     */
    migration_bh_schedule(bg_migration_vm_start_bh, s);
    bql_unlock();

    while (migration_is_active()) {
        MigIterateState iter_state = bg_migration_iteration_run(s);

        if (iter_state == MIG_ITERATE_BREAK) {
            break;
        }

        /*
         * Try to detect any kind of failures, and see whether we
         * should stop the migration now.
         */
        thr_error = migration_detect_error(s);
        if (thr_error == MIG_THR_ERR_FATAL) {
            /* Stop migration */
            break;
        }

        migration_update_counters(s, qemu_clock_get_ms(QEMU_CLOCK_REALTIME));
    }

    trace_migration_thread_after_loop();
    goto done;

fail_with_bql:
    bql_unlock();

fail:
    /* local_err is guaranteed to be set when reaching here */
    migrate_error_propagate(s, local_err);
    migrate_set_state(&s->state, MIGRATION_STATUS_ACTIVE,
                      MIGRATION_STATUS_FAILED);

done:
    bg_migration_iteration_finish(s);
    qemu_fclose(fb);
    object_unref(OBJECT(s));
    rcu_unregister_thread();
    return NULL;
}

void migration_start_outgoing(MigrationState *s)
{
    Error *local_err = NULL;
    uint64_t rate_limit;
    bool resume = (s->state == MIGRATION_STATUS_POSTCOPY_RECOVER_SETUP);
    int ret;

    s->expected_downtime = migrate_downtime_limit();

    if (resume) {
        /* This is a resumed migration */
        rate_limit = migrate_max_postcopy_bandwidth();
    } else {
        /* This is a fresh new migration */
        rate_limit = migrate_max_bandwidth();

        /* Notify before starting migration thread */
        if (migration_call_notifiers(MIG_EVENT_SETUP, &local_err)) {
            goto fail;
        }
    }

    migration_rate_set(rate_limit);
    if (!qemu_file_set_blocking(s->to_dst_file, true, &local_err)) {
        goto fail;
    }

    /*
     * Open the return path. For postcopy, it is used exclusively. For
     * precopy, only if user specified "return-path" capability would
     * QEMU uses the return path.
     */
    if (migrate_postcopy_ram() || migrate_return_path()) {
        open_return_path_on_source(s);
    }

    /*
     * This needs to be done before resuming a postcopy.  Note: for newer
     * QEMUs we will delay the channel creation until postcopy_start(), to
     * avoid disorder of channel creations.
     */
    if (migrate_postcopy_preempt() && s->preempt_pre_7_2) {
        postcopy_preempt_setup(s);
    }

    if (resume) {
        /* Wakeup the main migration thread to do the recovery */
        migrate_set_state(&s->state, MIGRATION_STATUS_POSTCOPY_RECOVER_SETUP,
                          MIGRATION_STATUS_POSTCOPY_RECOVER);
        qemu_sem_post(&s->postcopy_pause_sem);
        return;
    }

    if (migrate_mode_is_cpr()) {
        ret = migration_stop_vm(s, RUN_STATE_FINISH_MIGRATE);
        if (ret < 0) {
            error_setg(&local_err, "migration_stop_vm failed, error %d", -ret);
            goto fail;
        }
    }

    /*
     * Take a refcount to make sure the migration object won't get freed by
     * the main thread already in migration_shutdown().
     *
     * The refcount will be released at the end of the thread function.
     */
    object_ref(OBJECT(s));

    if (migrate_background_snapshot()) {
        qemu_thread_create(&s->thread, MIGRATION_THREAD_SNAPSHOT,
                bg_migration_thread, s, QEMU_THREAD_JOINABLE);
    } else {
        qemu_thread_create(&s->thread, MIGRATION_THREAD_SRC_MAIN,
                migration_thread, s, QEMU_THREAD_JOINABLE);
    }
    s->migration_thread_running = true;
    return;

fail:
    migration_connect_error_propagate(s, local_err);
    if (s->error) {
        error_report_err(error_copy(s->error));
    }
}

static void migration_class_init(ObjectClass *klass, const void *data)
{
    DeviceClass *dc = DEVICE_CLASS(klass);

    dc->user_creatable = false;
    device_class_set_props_n(dc, migration_properties,
                             migration_properties_count);
}

static void migration_instance_finalize(Object *obj)
{
    MigrationState *ms = MIGRATION_OBJ(obj);

    qapi_free_BitmapMigrationNodeAliasList(ms->parameters.block_bitmap_mapping);
    qapi_free_strList(ms->parameters.cpr_exec_command);
    qemu_mutex_destroy(&ms->error_mutex);
    qemu_mutex_destroy(&ms->qemu_file_lock);
    qemu_sem_destroy(&ms->wait_unplug_sem);
    qemu_sem_destroy(&ms->rate_limit_sem);
    qemu_event_destroy(&ms->pause_event);
    qemu_sem_destroy(&ms->postcopy_pause_sem);
    qemu_sem_destroy(&ms->rp_state.rp_sem);
    qemu_sem_destroy(&ms->rp_state.rp_pong_acks);
    qemu_sem_destroy(&ms->postcopy_qemufile_src_sem);
    error_free(ms->error);
    qemu_event_destroy(&ms->postcopy_package_loaded_event);
}

static void migration_instance_init(Object *obj)
{
    MigrationState *ms = MIGRATION_OBJ(obj);

    ms->state = MIGRATION_STATUS_NONE;
    ms->mbps = -1;
    ms->pages_per_second = -1;
    qemu_event_init(&ms->pause_event, false);
    qemu_mutex_init(&ms->error_mutex);

    migrate_params_init(&ms->parameters);

    qemu_sem_init(&ms->postcopy_pause_sem, 0);
    qemu_sem_init(&ms->rp_state.rp_sem, 0);
    qemu_sem_init(&ms->rp_state.rp_pong_acks, 0);
    qemu_sem_init(&ms->rate_limit_sem, 0);
    qemu_sem_init(&ms->wait_unplug_sem, 0);
    qemu_sem_init(&ms->postcopy_qemufile_src_sem, 0);
    qemu_mutex_init(&ms->qemu_file_lock);
    qemu_event_init(&ms->postcopy_package_loaded_event, 0);
}

/*
 * Return true if check pass, false otherwise. Error will be put
 * inside errp if provided.
 */
static bool migration_object_check(MigrationState *ms, Error **errp)
{
    /* Assuming all off */
    bool old_caps[MIGRATION_CAPABILITY__MAX] = { 0 };

    if (!migrate_params_check(&ms->parameters, errp)) {
        return false;
    }

    return migrate_caps_check(old_caps, ms->capabilities, errp);
}

static const TypeInfo migration_type = {
    .name = TYPE_MIGRATION,
    /*
     * NOTE: TYPE_MIGRATION is not really a device, as the object is
     * not created using qdev_new(), it is not attached to the qdev
     * device tree, and it is never realized.
     *
     * TODO: Make this TYPE_OBJECT once QOM provides something like
     * TYPE_DEVICE's "-global" properties.
     */
    .parent = TYPE_DEVICE,
    .class_init = migration_class_init,
    .class_size = sizeof(MigrationClass),
    .instance_size = sizeof(MigrationState),
    .instance_init = migration_instance_init,
    .instance_finalize = migration_instance_finalize,
};

static void register_migration_types(void)
{
    type_register_static(&migration_type);
}

type_init(register_migration_types);