Revert "rust: add PL011 device model"
Patch was applied with invalid authorship by accident, which confuses
git tooling that look at git blame for contributors etc.
Patch will be re-applied with correct authorship right after this
commit.
This reverts commit d0f0cd5b1f7e9780753344548e17ad4df9fcf5d8.
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20241024-rust-round-2-v1-1-051e7a25b978@linaro.org
diff --git a/MAINTAINERS b/MAINTAINERS
index 2c14c67..e5bd7b7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1146,11 +1146,6 @@
F: tests/qtest/microbit-test.c
F: docs/system/arm/nrf.rst
-ARM PL011 Rust device
-M: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
-S: Maintained
-F: rust/hw/char/pl011/
-
AVR Machines
-------------
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index e7fd933..53eb7bb 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -20,8 +20,7 @@
select PCI_EXPRESS
select PCI_EXPRESS_GENERIC_BRIDGE
select PFLASH_CFI01
- select PL011 if !HAVE_RUST # UART
- select X_PL011_RUST if HAVE_RUST # UART
+ select PL011 # UART
select PL031 # RTC
select PL061 # GPIO
select GPIO_PWR
@@ -74,8 +73,7 @@
select AHCI
select ARM_TIMER # sp804
select ARM_V7M
- select PL011 if !HAVE_RUST # UART
- select X_PL011_RUST if HAVE_RUST # UART
+ select PL011 # UART
select PL022 # SPI
select PL031 # RTC
select PL061 # GPIO
@@ -88,8 +86,7 @@
depends on TCG && ARM
select ARM_TIMER
select INTEGRATOR_DEBUG
- select PL011 if !HAVE_RUST # UART
- select X_PL011_RUST if HAVE_RUST # UART
+ select PL011 # UART
select PL031 # RTC
select PL041 # audio
select PL050 # keyboard/mouse
@@ -107,8 +104,7 @@
default y
depends on TCG && ARM
select ARMSSE
- select PL011 if !HAVE_RUST # UART
- select X_PL011_RUST if HAVE_RUST # UART
+ select PL011
select PL031
select SPLIT_IRQ
select UNIMP
@@ -172,8 +168,7 @@
select WM8750 # audio codec
select LSI_SCSI_PCI
select PCI
- select PL011 if !HAVE_RUST # UART
- select X_PL011_RUST if HAVE_RUST # UART
+ select PL011 # UART
select PL031 # RTC
select PL041 # audio codec
select PL050 # keyboard/mouse
@@ -198,8 +193,7 @@
select PCI_EXPRESS
select PCI_EXPRESS_GENERIC_BRIDGE
select PFLASH_CFI01
- select PL011 if !HAVE_RUST # UART
- select X_PL011_RUST if HAVE_RUST # UART
+ select PL011 # UART
select PL031 # RTC
select PL061 # GPIO
select USB_XHCI_SYSBUS
@@ -223,8 +217,7 @@
select ARM_V7M
select CMSDK_APB_WATCHDOG
select I2C
- select PL011 if !HAVE_RUST # UART
- select X_PL011_RUST if HAVE_RUST # UART
+ select PL011 # UART
select PL022 # SPI
select PL061 # GPIO
select SSD0303 # OLED display
@@ -284,8 +277,7 @@
select ARM_TIMER # sp804
select LAN9118
select PFLASH_CFI01
- select PL011 if !HAVE_RUST # UART
- select X_PL011_RUST if HAVE_RUST # UART
+ select PL011 # UART
select PL041 # audio codec
select PL181 # display
select REALVIEW
@@ -370,8 +362,7 @@
default y
depends on TCG && ARM
select FRAMEBUFFER
- select PL011 if !HAVE_RUST # UART
- select X_PL011_RUST if HAVE_RUST # UART
+ select PL011 # UART
select SDHCI
select USB_DWC2
select BCM2835_SPI
@@ -447,8 +438,7 @@
select ARM_GIC
select CPU_CLUSTER
select DEVICE_TREE
- select PL011 if !HAVE_RUST # UART
- select X_PL011_RUST if HAVE_RUST # UART
+ select PL011
select CADENCE
select VIRTIO_MMIO
select UNIMP
diff --git a/meson.build b/meson.build
index c386593..7f08e8a 100644
--- a/meson.build
+++ b/meson.build
@@ -3540,7 +3540,6 @@
system_ss = ss.source_set()
specific_fuzz_ss = ss.source_set()
specific_ss = ss.source_set()
-rust_devices_ss = ss.source_set()
stub_ss = ss.source_set()
trace_ss = ss.source_set()
user_ss = ss.source_set()
@@ -4088,29 +4087,6 @@
arch_srcs += target_specific.sources()
arch_deps += target_specific.dependencies()
- if have_rust and have_system
- target_rust = rust_devices_ss.apply(config_target, strict: false)
- crates = []
- foreach dep : target_rust.dependencies()
- crates += dep.get_variable('crate')
- endforeach
- if crates.length() > 0
- rlib_rs = custom_target('rust_' + target.underscorify() + '.rs',
- output: 'rust_' + target.underscorify() + '.rs',
- command: [find_program('scripts/rust/rust_root_crate.sh')] + crates,
- capture: true,
- build_by_default: true,
- build_always_stale: true)
- rlib = static_library('rust_' + target.underscorify(),
- rlib_rs,
- dependencies: target_rust.dependencies(),
- override_options: ['rust_std=2021', 'build.rust_std=2021'],
- rust_args: rustc_args,
- rust_abi: 'c')
- arch_deps += declare_dependency(link_whole: [rlib])
- endif
- endif
-
# allow using headers from the dependencies but do not include the sources,
# because this emulator only needs those in "objects". For external
# dependencies, the full dependency is included below in the executable.
diff --git a/rust/Kconfig b/rust/Kconfig
index f9f5c39..e69de29 100644
--- a/rust/Kconfig
+++ b/rust/Kconfig
@@ -1 +0,0 @@
-source hw/Kconfig
diff --git a/rust/hw/Kconfig b/rust/hw/Kconfig
deleted file mode 100644
index 4d934f3..0000000
--- a/rust/hw/Kconfig
+++ /dev/null
@@ -1,2 +0,0 @@
-# devices Kconfig
-source char/Kconfig
diff --git a/rust/hw/char/Kconfig b/rust/hw/char/Kconfig
deleted file mode 100644
index a1732a9..0000000
--- a/rust/hw/char/Kconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-config X_PL011_RUST
- bool
- default y if HAVE_RUST
diff --git a/rust/hw/char/meson.build b/rust/hw/char/meson.build
deleted file mode 100644
index 5716dc4..0000000
--- a/rust/hw/char/meson.build
+++ /dev/null
@@ -1 +0,0 @@
-subdir('pl011')
diff --git a/rust/hw/char/pl011/.gitignore b/rust/hw/char/pl011/.gitignore
deleted file mode 100644
index 71eaff2..0000000
--- a/rust/hw/char/pl011/.gitignore
+++ /dev/null
@@ -1,2 +0,0 @@
-# Ignore generated bindings file overrides.
-src/bindings.rs.inc
diff --git a/rust/hw/char/pl011/Cargo.lock b/rust/hw/char/pl011/Cargo.lock
deleted file mode 100644
index b58cebb..0000000
--- a/rust/hw/char/pl011/Cargo.lock
+++ /dev/null
@@ -1,134 +0,0 @@
-# This file is automatically @generated by Cargo.
-# It is not intended for manual editing.
-version = 3
-
-[[package]]
-name = "arbitrary-int"
-version = "1.2.7"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "c84fc003e338a6f69fbd4f7fe9f92b535ff13e9af8997f3b14b6ddff8b1df46d"
-
-[[package]]
-name = "bilge"
-version = "0.2.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "dc707ed8ebf81de5cd6c7f48f54b4c8621760926cdf35a57000747c512e67b57"
-dependencies = [
- "arbitrary-int",
- "bilge-impl",
-]
-
-[[package]]
-name = "bilge-impl"
-version = "0.2.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "feb11e002038ad243af39c2068c8a72bcf147acf05025dcdb916fcc000adb2d8"
-dependencies = [
- "itertools",
- "proc-macro-error",
- "proc-macro2",
- "quote",
- "syn",
-]
-
-[[package]]
-name = "either"
-version = "1.12.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "3dca9240753cf90908d7e4aac30f630662b02aebaa1b58a3cadabdb23385b58b"
-
-[[package]]
-name = "itertools"
-version = "0.11.0"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "b1c173a5686ce8bfa551b3563d0c2170bf24ca44da99c7ca4bfdab5418c3fe57"
-dependencies = [
- "either",
-]
-
-[[package]]
-name = "pl011"
-version = "0.1.0"
-dependencies = [
- "bilge",
- "bilge-impl",
- "qemu_api",
- "qemu_api_macros",
-]
-
-[[package]]
-name = "proc-macro-error"
-version = "1.0.4"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "da25490ff9892aab3fcf7c36f08cfb902dd3e71ca0f9f9517bea02a73a5ce38c"
-dependencies = [
- "proc-macro-error-attr",
- "proc-macro2",
- "quote",
- "version_check",
-]
-
-[[package]]
-name = "proc-macro-error-attr"
-version = "1.0.4"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "a1be40180e52ecc98ad80b184934baf3d0d29f979574e439af5a55274b35f869"
-dependencies = [
- "proc-macro2",
- "quote",
- "version_check",
-]
-
-[[package]]
-name = "proc-macro2"
-version = "1.0.84"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "ec96c6a92621310b51366f1e28d05ef11489516e93be030060e5fc12024a49d6"
-dependencies = [
- "unicode-ident",
-]
-
-[[package]]
-name = "qemu_api"
-version = "0.1.0"
-
-[[package]]
-name = "qemu_api_macros"
-version = "0.1.0"
-dependencies = [
- "proc-macro2",
- "quote",
- "syn",
-]
-
-[[package]]
-name = "quote"
-version = "1.0.36"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "0fa76aaf39101c457836aec0ce2316dbdc3ab723cdda1c6bd4e6ad4208acaca7"
-dependencies = [
- "proc-macro2",
-]
-
-[[package]]
-name = "syn"
-version = "2.0.66"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "c42f3f41a2de00b01c0aaad383c5a45241efc8b2d1eda5661812fda5f3cdcff5"
-dependencies = [
- "proc-macro2",
- "quote",
- "unicode-ident",
-]
-
-[[package]]
-name = "unicode-ident"
-version = "1.0.12"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "3354b9ac3fae1ff6755cb6db53683adb661634f67557942dea4facebec0fee4b"
-
-[[package]]
-name = "version_check"
-version = "0.9.4"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "49874b5167b65d7193b8aba1567f5c7d93d001cafc34600cee003eda787e483f"
diff --git a/rust/hw/char/pl011/Cargo.toml b/rust/hw/char/pl011/Cargo.toml
deleted file mode 100644
index b089e3d..0000000
--- a/rust/hw/char/pl011/Cargo.toml
+++ /dev/null
@@ -1,26 +0,0 @@
-[package]
-name = "pl011"
-version = "0.1.0"
-edition = "2021"
-authors = ["Manos Pitsidianakis <manos.pitsidianakis@linaro.org>"]
-license = "GPL-2.0-or-later"
-readme = "README.md"
-homepage = "https://www.qemu.org"
-description = "pl011 device model for QEMU"
-repository = "https://gitlab.com/epilys/rust-for-qemu"
-resolver = "2"
-publish = false
-keywords = []
-categories = []
-
-[lib]
-crate-type = ["staticlib"]
-
-[dependencies]
-bilge = { version = "0.2.0" }
-bilge-impl = { version = "0.2.0" }
-qemu_api = { path = "../../../qemu-api" }
-qemu_api_macros = { path = "../../../qemu-api-macros" }
-
-# Do not include in any global workspace
-[workspace]
diff --git a/rust/hw/char/pl011/README.md b/rust/hw/char/pl011/README.md
deleted file mode 100644
index cd7dea3..0000000
--- a/rust/hw/char/pl011/README.md
+++ /dev/null
@@ -1,31 +0,0 @@
-# PL011 QEMU Device Model
-
-This library implements a device model for the PrimeCell® UART (PL011)
-device in QEMU.
-
-## Build static lib
-
-Host build target must be explicitly specified:
-
-```sh
-cargo build --target x86_64-unknown-linux-gnu
-```
-
-Replace host target triplet if necessary.
-
-## Generate Rust documentation
-
-To generate docs for this crate, including private items:
-
-```sh
-cargo doc --no-deps --document-private-items --target x86_64-unknown-linux-gnu
-```
-
-To include direct dependencies like `bilge` (bitmaps for register types):
-
-```sh
-cargo tree --depth 1 -e normal --prefix none \
- | cut -d' ' -f1 \
- | xargs printf -- '-p %s\n' \
- | xargs cargo doc --no-deps --document-private-items --target x86_64-unknown-linux-gnu
-```
diff --git a/rust/hw/char/pl011/meson.build b/rust/hw/char/pl011/meson.build
deleted file mode 100644
index 547cca5..0000000
--- a/rust/hw/char/pl011/meson.build
+++ /dev/null
@@ -1,26 +0,0 @@
-subproject('bilge-0.2-rs', required: true)
-subproject('bilge-impl-0.2-rs', required: true)
-
-bilge_dep = dependency('bilge-0.2-rs')
-bilge_impl_dep = dependency('bilge-impl-0.2-rs')
-
-_libpl011_rs = static_library(
- 'pl011',
- files('src/lib.rs'),
- override_options: ['rust_std=2021', 'build.rust_std=2021'],
- rust_abi: 'rust',
- dependencies: [
- bilge_dep,
- bilge_impl_dep,
- qemu_api,
- qemu_api_macros,
- ],
-)
-
-rust_devices_ss.add(when: 'CONFIG_X_PL011_RUST', if_true: [declare_dependency(
- link_whole: [_libpl011_rs],
- # Putting proc macro crates in `dependencies` is necessary for Meson to find
- # them when compiling the root per-target static rust lib.
- dependencies: [bilge_impl_dep, qemu_api_macros],
- variables: {'crate': 'pl011'},
-)])
diff --git a/rust/hw/char/pl011/src/device.rs b/rust/hw/char/pl011/src/device.rs
deleted file mode 100644
index c7193b4..0000000
--- a/rust/hw/char/pl011/src/device.rs
+++ /dev/null
@@ -1,599 +0,0 @@
-// Copyright 2024, Linaro Limited
-// Author(s): Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-use core::{
- ffi::{c_int, c_uchar, c_uint, c_void, CStr},
- ptr::{addr_of, addr_of_mut, NonNull},
-};
-
-use qemu_api::{
- bindings::{self, *},
- definitions::ObjectImpl,
-};
-
-use crate::{
- memory_ops::PL011_OPS,
- registers::{self, Interrupt},
- RegisterOffset,
-};
-
-static PL011_ID_ARM: [c_uchar; 8] = [0x11, 0x10, 0x14, 0x00, 0x0d, 0xf0, 0x05, 0xb1];
-
-const DATA_BREAK: u32 = 1 << 10;
-
-/// QEMU sourced constant.
-pub const PL011_FIFO_DEPTH: usize = 16_usize;
-
-#[repr(C)]
-#[derive(Debug, qemu_api_macros::Object)]
-/// PL011 Device Model in QEMU
-pub struct PL011State {
- pub parent_obj: SysBusDevice,
- pub iomem: MemoryRegion,
- #[doc(alias = "fr")]
- pub flags: registers::Flags,
- #[doc(alias = "lcr")]
- pub line_control: registers::LineControl,
- #[doc(alias = "rsr")]
- pub receive_status_error_clear: registers::ReceiveStatusErrorClear,
- #[doc(alias = "cr")]
- pub control: registers::Control,
- pub dmacr: u32,
- pub int_enabled: u32,
- pub int_level: u32,
- pub read_fifo: [u32; PL011_FIFO_DEPTH],
- pub ilpr: u32,
- pub ibrd: u32,
- pub fbrd: u32,
- pub ifl: u32,
- pub read_pos: usize,
- pub read_count: usize,
- pub read_trigger: usize,
- #[doc(alias = "chr")]
- pub char_backend: CharBackend,
- /// QEMU interrupts
- ///
- /// ```text
- /// * sysbus MMIO region 0: device registers
- /// * sysbus IRQ 0: `UARTINTR` (combined interrupt line)
- /// * sysbus IRQ 1: `UARTRXINTR` (receive FIFO interrupt line)
- /// * sysbus IRQ 2: `UARTTXINTR` (transmit FIFO interrupt line)
- /// * sysbus IRQ 3: `UARTRTINTR` (receive timeout interrupt line)
- /// * sysbus IRQ 4: `UARTMSINTR` (momem status interrupt line)
- /// * sysbus IRQ 5: `UARTEINTR` (error interrupt line)
- /// ```
- #[doc(alias = "irq")]
- pub interrupts: [qemu_irq; 6usize],
- #[doc(alias = "clk")]
- pub clock: NonNull<Clock>,
- #[doc(alias = "migrate_clk")]
- pub migrate_clock: bool,
-}
-
-impl ObjectImpl for PL011State {
- type Class = PL011Class;
- const TYPE_INFO: qemu_api::bindings::TypeInfo = qemu_api::type_info! { Self };
- const TYPE_NAME: &'static CStr = crate::TYPE_PL011;
- const PARENT_TYPE_NAME: Option<&'static CStr> = Some(TYPE_SYS_BUS_DEVICE);
- const ABSTRACT: bool = false;
- const INSTANCE_INIT: Option<unsafe extern "C" fn(obj: *mut Object)> = Some(pl011_init);
- const INSTANCE_POST_INIT: Option<unsafe extern "C" fn(obj: *mut Object)> = None;
- const INSTANCE_FINALIZE: Option<unsafe extern "C" fn(obj: *mut Object)> = None;
-}
-
-#[repr(C)]
-pub struct PL011Class {
- _inner: [u8; 0],
-}
-
-impl qemu_api::definitions::Class for PL011Class {
- const CLASS_INIT: Option<
- unsafe extern "C" fn(klass: *mut ObjectClass, data: *mut core::ffi::c_void),
- > = Some(crate::device_class::pl011_class_init);
- const CLASS_BASE_INIT: Option<
- unsafe extern "C" fn(klass: *mut ObjectClass, data: *mut core::ffi::c_void),
- > = None;
-}
-
-#[used]
-pub static CLK_NAME: &CStr = c"clk";
-
-impl PL011State {
- /// Initializes a pre-allocated, unitialized instance of `PL011State`.
- ///
- /// # Safety
- ///
- /// `self` must point to a correctly sized and aligned location for the
- /// `PL011State` type. It must not be called more than once on the same
- /// location/instance. All its fields are expected to hold unitialized
- /// values with the sole exception of `parent_obj`.
- pub unsafe fn init(&mut self) {
- let dev = addr_of_mut!(*self).cast::<DeviceState>();
- // SAFETY:
- //
- // self and self.iomem are guaranteed to be valid at this point since callers
- // must make sure the `self` reference is valid.
- unsafe {
- memory_region_init_io(
- addr_of_mut!(self.iomem),
- addr_of_mut!(*self).cast::<Object>(),
- &PL011_OPS,
- addr_of_mut!(*self).cast::<c_void>(),
- Self::TYPE_INFO.name,
- 0x1000,
- );
- let sbd = addr_of_mut!(*self).cast::<SysBusDevice>();
- sysbus_init_mmio(sbd, addr_of_mut!(self.iomem));
- for irq in self.interrupts.iter_mut() {
- sysbus_init_irq(sbd, irq);
- }
- }
- // SAFETY:
- //
- // self.clock is not initialized at this point; but since `NonNull<_>` is Copy,
- // we can overwrite the undefined value without side effects. This is
- // safe since all PL011State instances are created by QOM code which
- // calls this function to initialize the fields; therefore no code is
- // able to access an invalid self.clock value.
- unsafe {
- self.clock = NonNull::new(qdev_init_clock_in(
- dev,
- CLK_NAME.as_ptr(),
- None, /* pl011_clock_update */
- addr_of_mut!(*self).cast::<c_void>(),
- ClockEvent::ClockUpdate.0,
- ))
- .unwrap();
- }
- }
-
- pub fn read(
- &mut self,
- offset: hwaddr,
- _size: core::ffi::c_uint,
- ) -> std::ops::ControlFlow<u64, u64> {
- use RegisterOffset::*;
-
- std::ops::ControlFlow::Break(match RegisterOffset::try_from(offset) {
- Err(v) if (0x3f8..0x400).contains(&v) => {
- u64::from(PL011_ID_ARM[((offset - 0xfe0) >> 2) as usize])
- }
- Err(_) => {
- // qemu_log_mask(LOG_GUEST_ERROR, "pl011_read: Bad offset 0x%x\n", (int)offset);
- 0
- }
- Ok(DR) => {
- // s->flags &= ~PL011_FLAG_RXFF;
- self.flags.set_receive_fifo_full(false);
- let c = self.read_fifo[self.read_pos];
- if self.read_count > 0 {
- self.read_count -= 1;
- self.read_pos = (self.read_pos + 1) & (self.fifo_depth() - 1);
- }
- if self.read_count == 0 {
- // self.flags |= PL011_FLAG_RXFE;
- self.flags.set_receive_fifo_empty(true);
- }
- if self.read_count + 1 == self.read_trigger {
- //self.int_level &= ~ INT_RX;
- self.int_level &= !registers::INT_RX;
- }
- // Update error bits.
- self.receive_status_error_clear = c.to_be_bytes()[3].into();
- self.update();
- // Must call qemu_chr_fe_accept_input, so return Continue:
- return std::ops::ControlFlow::Continue(c.into());
- }
- Ok(RSR) => u8::from(self.receive_status_error_clear).into(),
- Ok(FR) => u16::from(self.flags).into(),
- Ok(FBRD) => self.fbrd.into(),
- Ok(ILPR) => self.ilpr.into(),
- Ok(IBRD) => self.ibrd.into(),
- Ok(LCR_H) => u16::from(self.line_control).into(),
- Ok(CR) => {
- // We exercise our self-control.
- u16::from(self.control).into()
- }
- Ok(FLS) => self.ifl.into(),
- Ok(IMSC) => self.int_enabled.into(),
- Ok(RIS) => self.int_level.into(),
- Ok(MIS) => u64::from(self.int_level & self.int_enabled),
- Ok(ICR) => {
- // "The UARTICR Register is the interrupt clear register and is write-only"
- // Source: ARM DDI 0183G 3.3.13 Interrupt Clear Register, UARTICR
- 0
- }
- Ok(DMACR) => self.dmacr.into(),
- })
- }
-
- pub fn write(&mut self, offset: hwaddr, value: u64) {
- // eprintln!("write offset {offset} value {value}");
- use RegisterOffset::*;
- let value: u32 = value as u32;
- match RegisterOffset::try_from(offset) {
- Err(_bad_offset) => {
- eprintln!("write bad offset {offset} value {value}");
- }
- Ok(DR) => {
- // ??? Check if transmitter is enabled.
- let ch: u8 = value as u8;
- // XXX this blocks entire thread. Rewrite to use
- // qemu_chr_fe_write and background I/O callbacks
-
- // SAFETY: self.char_backend is a valid CharBackend instance after it's been
- // initialized in realize().
- unsafe {
- qemu_chr_fe_write_all(addr_of_mut!(self.char_backend), &ch, 1);
- }
- self.loopback_tx(value);
- self.int_level |= registers::INT_TX;
- self.update();
- }
- Ok(RSR) => {
- self.receive_status_error_clear = 0.into();
- }
- Ok(FR) => {
- // flag writes are ignored
- }
- Ok(ILPR) => {
- self.ilpr = value;
- }
- Ok(IBRD) => {
- self.ibrd = value;
- }
- Ok(FBRD) => {
- self.fbrd = value;
- }
- Ok(LCR_H) => {
- let value = value as u16;
- let new_val: registers::LineControl = value.into();
- // Reset the FIFO state on FIFO enable or disable
- if bool::from(self.line_control.fifos_enabled())
- ^ bool::from(new_val.fifos_enabled())
- {
- self.reset_fifo();
- }
- if self.line_control.send_break() ^ new_val.send_break() {
- let mut break_enable: c_int = new_val.send_break().into();
- // SAFETY: self.char_backend is a valid CharBackend instance after it's been
- // initialized in realize().
- unsafe {
- qemu_chr_fe_ioctl(
- addr_of_mut!(self.char_backend),
- CHR_IOCTL_SERIAL_SET_BREAK as i32,
- addr_of_mut!(break_enable).cast::<c_void>(),
- );
- }
- self.loopback_break(break_enable > 0);
- }
- self.line_control = new_val;
- self.set_read_trigger();
- }
- Ok(CR) => {
- // ??? Need to implement the enable bit.
- let value = value as u16;
- self.control = value.into();
- self.loopback_mdmctrl();
- }
- Ok(FLS) => {
- self.ifl = value;
- self.set_read_trigger();
- }
- Ok(IMSC) => {
- self.int_enabled = value;
- self.update();
- }
- Ok(RIS) => {}
- Ok(MIS) => {}
- Ok(ICR) => {
- self.int_level &= !value;
- self.update();
- }
- Ok(DMACR) => {
- self.dmacr = value;
- if value & 3 > 0 {
- // qemu_log_mask(LOG_UNIMP, "pl011: DMA not implemented\n");
- eprintln!("pl011: DMA not implemented");
- }
- }
- }
- }
-
- #[inline]
- fn loopback_tx(&mut self, value: u32) {
- if !self.loopback_enabled() {
- return;
- }
-
- // Caveat:
- //
- // In real hardware, TX loopback happens at the serial-bit level
- // and then reassembled by the RX logics back into bytes and placed
- // into the RX fifo. That is, loopback happens after TX fifo.
- //
- // Because the real hardware TX fifo is time-drained at the frame
- // rate governed by the configured serial format, some loopback
- // bytes in TX fifo may still be able to get into the RX fifo
- // that could be full at times while being drained at software
- // pace.
- //
- // In such scenario, the RX draining pace is the major factor
- // deciding which loopback bytes get into the RX fifo, unless
- // hardware flow-control is enabled.
- //
- // For simplicity, the above described is not emulated.
- self.put_fifo(value);
- }
-
- fn loopback_mdmctrl(&mut self) {
- if !self.loopback_enabled() {
- return;
- }
-
- /*
- * Loopback software-driven modem control outputs to modem status inputs:
- * FR.RI <= CR.Out2
- * FR.DCD <= CR.Out1
- * FR.CTS <= CR.RTS
- * FR.DSR <= CR.DTR
- *
- * The loopback happens immediately even if this call is triggered
- * by setting only CR.LBE.
- *
- * CTS/RTS updates due to enabled hardware flow controls are not
- * dealt with here.
- */
-
- //fr = s->flags & ~(PL011_FLAG_RI | PL011_FLAG_DCD |
- // PL011_FLAG_DSR | PL011_FLAG_CTS);
- //fr |= (cr & CR_OUT2) ? PL011_FLAG_RI : 0;
- //fr |= (cr & CR_OUT1) ? PL011_FLAG_DCD : 0;
- //fr |= (cr & CR_RTS) ? PL011_FLAG_CTS : 0;
- //fr |= (cr & CR_DTR) ? PL011_FLAG_DSR : 0;
- //
- self.flags.set_ring_indicator(self.control.out_2());
- self.flags.set_data_carrier_detect(self.control.out_1());
- self.flags.set_clear_to_send(self.control.request_to_send());
- self.flags
- .set_data_set_ready(self.control.data_transmit_ready());
-
- // Change interrupts based on updated FR
- let mut il = self.int_level;
-
- il &= !Interrupt::MS;
- //il |= (fr & PL011_FLAG_DSR) ? INT_DSR : 0;
- //il |= (fr & PL011_FLAG_DCD) ? INT_DCD : 0;
- //il |= (fr & PL011_FLAG_CTS) ? INT_CTS : 0;
- //il |= (fr & PL011_FLAG_RI) ? INT_RI : 0;
-
- if self.flags.data_set_ready() {
- il |= Interrupt::DSR as u32;
- }
- if self.flags.data_carrier_detect() {
- il |= Interrupt::DCD as u32;
- }
- if self.flags.clear_to_send() {
- il |= Interrupt::CTS as u32;
- }
- if self.flags.ring_indicator() {
- il |= Interrupt::RI as u32;
- }
- self.int_level = il;
- self.update();
- }
-
- fn loopback_break(&mut self, enable: bool) {
- if enable {
- self.loopback_tx(DATA_BREAK);
- }
- }
-
- fn set_read_trigger(&mut self) {
- self.read_trigger = 1;
- }
-
- pub fn realize(&mut self) {
- // SAFETY: self.char_backend has the correct size and alignment for a
- // CharBackend object, and its callbacks are of the correct types.
- unsafe {
- qemu_chr_fe_set_handlers(
- addr_of_mut!(self.char_backend),
- Some(pl011_can_receive),
- Some(pl011_receive),
- Some(pl011_event),
- None,
- addr_of_mut!(*self).cast::<c_void>(),
- core::ptr::null_mut(),
- true,
- );
- }
- }
-
- pub fn reset(&mut self) {
- self.line_control.reset();
- self.receive_status_error_clear.reset();
- self.dmacr = 0;
- self.int_enabled = 0;
- self.int_level = 0;
- self.ilpr = 0;
- self.ibrd = 0;
- self.fbrd = 0;
- self.read_trigger = 1;
- self.ifl = 0x12;
- self.control.reset();
- self.flags = 0.into();
- self.reset_fifo();
- }
-
- pub fn reset_fifo(&mut self) {
- self.read_count = 0;
- self.read_pos = 0;
-
- /* Reset FIFO flags */
- self.flags.reset();
- }
-
- pub fn can_receive(&self) -> bool {
- // trace_pl011_can_receive(s->lcr, s->read_count, r);
- self.read_count < self.fifo_depth()
- }
-
- pub fn event(&mut self, event: QEMUChrEvent) {
- if event == bindings::QEMUChrEvent::CHR_EVENT_BREAK && !self.fifo_enabled() {
- self.put_fifo(DATA_BREAK);
- self.receive_status_error_clear.set_break_error(true);
- }
- }
-
- #[inline]
- pub fn fifo_enabled(&self) -> bool {
- matches!(self.line_control.fifos_enabled(), registers::Mode::FIFO)
- }
-
- #[inline]
- pub fn loopback_enabled(&self) -> bool {
- self.control.enable_loopback()
- }
-
- #[inline]
- pub fn fifo_depth(&self) -> usize {
- // Note: FIFO depth is expected to be power-of-2
- if self.fifo_enabled() {
- return PL011_FIFO_DEPTH;
- }
- 1
- }
-
- pub fn put_fifo(&mut self, value: c_uint) {
- let depth = self.fifo_depth();
- assert!(depth > 0);
- let slot = (self.read_pos + self.read_count) & (depth - 1);
- self.read_fifo[slot] = value;
- self.read_count += 1;
- // s->flags &= ~PL011_FLAG_RXFE;
- self.flags.set_receive_fifo_empty(false);
- if self.read_count == depth {
- //s->flags |= PL011_FLAG_RXFF;
- self.flags.set_receive_fifo_full(true);
- }
-
- if self.read_count == self.read_trigger {
- self.int_level |= registers::INT_RX;
- self.update();
- }
- }
-
- pub fn update(&self) {
- let flags = self.int_level & self.int_enabled;
- for (irq, i) in self.interrupts.iter().zip(IRQMASK) {
- // SAFETY: self.interrupts have been initialized in init().
- unsafe { qemu_set_irq(*irq, i32::from(flags & i != 0)) };
- }
- }
-}
-
-/// Which bits in the interrupt status matter for each outbound IRQ line ?
-pub const IRQMASK: [u32; 6] = [
- /* combined IRQ */
- Interrupt::E
- | Interrupt::MS
- | Interrupt::RT as u32
- | Interrupt::TX as u32
- | Interrupt::RX as u32,
- Interrupt::RX as u32,
- Interrupt::TX as u32,
- Interrupt::RT as u32,
- Interrupt::MS,
- Interrupt::E,
-];
-
-/// # Safety
-///
-/// We expect the FFI user of this function to pass a valid pointer, that has
-/// the same size as [`PL011State`]. We also expect the device is
-/// readable/writeable from one thread at any time.
-#[no_mangle]
-pub unsafe extern "C" fn pl011_can_receive(opaque: *mut c_void) -> c_int {
- unsafe {
- debug_assert!(!opaque.is_null());
- let state = NonNull::new_unchecked(opaque.cast::<PL011State>());
- state.as_ref().can_receive().into()
- }
-}
-
-/// # Safety
-///
-/// We expect the FFI user of this function to pass a valid pointer, that has
-/// the same size as [`PL011State`]. We also expect the device is
-/// readable/writeable from one thread at any time.
-///
-/// The buffer and size arguments must also be valid.
-#[no_mangle]
-pub unsafe extern "C" fn pl011_receive(
- opaque: *mut core::ffi::c_void,
- buf: *const u8,
- size: core::ffi::c_int,
-) {
- unsafe {
- debug_assert!(!opaque.is_null());
- let mut state = NonNull::new_unchecked(opaque.cast::<PL011State>());
- if state.as_ref().loopback_enabled() {
- return;
- }
- if size > 0 {
- debug_assert!(!buf.is_null());
- state.as_mut().put_fifo(c_uint::from(buf.read_volatile()))
- }
- }
-}
-
-/// # Safety
-///
-/// We expect the FFI user of this function to pass a valid pointer, that has
-/// the same size as [`PL011State`]. We also expect the device is
-/// readable/writeable from one thread at any time.
-#[no_mangle]
-pub unsafe extern "C" fn pl011_event(opaque: *mut core::ffi::c_void, event: QEMUChrEvent) {
- unsafe {
- debug_assert!(!opaque.is_null());
- let mut state = NonNull::new_unchecked(opaque.cast::<PL011State>());
- state.as_mut().event(event)
- }
-}
-
-/// # Safety
-///
-/// We expect the FFI user of this function to pass a valid pointer for `chr`.
-#[no_mangle]
-pub unsafe extern "C" fn pl011_create(
- addr: u64,
- irq: qemu_irq,
- chr: *mut Chardev,
-) -> *mut DeviceState {
- unsafe {
- let dev: *mut DeviceState = qdev_new(PL011State::TYPE_INFO.name);
- let sysbus: *mut SysBusDevice = dev.cast::<SysBusDevice>();
-
- qdev_prop_set_chr(dev, bindings::TYPE_CHARDEV.as_ptr(), chr);
- sysbus_realize_and_unref(sysbus, addr_of!(error_fatal) as *mut *mut Error);
- sysbus_mmio_map(sysbus, 0, addr);
- sysbus_connect_irq(sysbus, 0, irq);
- dev
- }
-}
-
-/// # Safety
-///
-/// We expect the FFI user of this function to pass a valid pointer, that has
-/// the same size as [`PL011State`]. We also expect the device is
-/// readable/writeable from one thread at any time.
-#[no_mangle]
-pub unsafe extern "C" fn pl011_init(obj: *mut Object) {
- unsafe {
- debug_assert!(!obj.is_null());
- let mut state = NonNull::new_unchecked(obj.cast::<PL011State>());
- state.as_mut().init();
- }
-}
diff --git a/rust/hw/char/pl011/src/device_class.rs b/rust/hw/char/pl011/src/device_class.rs
deleted file mode 100644
index b7ab31a..0000000
--- a/rust/hw/char/pl011/src/device_class.rs
+++ /dev/null
@@ -1,70 +0,0 @@
-// Copyright 2024, Linaro Limited
-// Author(s): Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-use core::ptr::NonNull;
-
-use qemu_api::{bindings::*, definitions::ObjectImpl};
-
-use crate::device::PL011State;
-
-#[used]
-pub static VMSTATE_PL011: VMStateDescription = VMStateDescription {
- name: PL011State::TYPE_INFO.name,
- unmigratable: true,
- ..unsafe { ::core::mem::MaybeUninit::<VMStateDescription>::zeroed().assume_init() }
-};
-
-qemu_api::declare_properties! {
- PL011_PROPERTIES,
- qemu_api::define_property!(
- c"chardev",
- PL011State,
- char_backend,
- unsafe { &qdev_prop_chr },
- CharBackend
- ),
- qemu_api::define_property!(
- c"migrate-clk",
- PL011State,
- migrate_clock,
- unsafe { &qdev_prop_bool },
- bool
- ),
-}
-
-qemu_api::device_class_init! {
- pl011_class_init,
- props => PL011_PROPERTIES,
- realize_fn => Some(pl011_realize),
- legacy_reset_fn => Some(pl011_reset),
- vmsd => VMSTATE_PL011,
-}
-
-/// # Safety
-///
-/// We expect the FFI user of this function to pass a valid pointer, that has
-/// the same size as [`PL011State`]. We also expect the device is
-/// readable/writeable from one thread at any time.
-#[no_mangle]
-pub unsafe extern "C" fn pl011_realize(dev: *mut DeviceState, _errp: *mut *mut Error) {
- unsafe {
- assert!(!dev.is_null());
- let mut state = NonNull::new_unchecked(dev.cast::<PL011State>());
- state.as_mut().realize();
- }
-}
-
-/// # Safety
-///
-/// We expect the FFI user of this function to pass a valid pointer, that has
-/// the same size as [`PL011State`]. We also expect the device is
-/// readable/writeable from one thread at any time.
-#[no_mangle]
-pub unsafe extern "C" fn pl011_reset(dev: *mut DeviceState) {
- unsafe {
- assert!(!dev.is_null());
- let mut state = NonNull::new_unchecked(dev.cast::<PL011State>());
- state.as_mut().reset();
- }
-}
diff --git a/rust/hw/char/pl011/src/lib.rs b/rust/hw/char/pl011/src/lib.rs
deleted file mode 100644
index 2939ee5..0000000
--- a/rust/hw/char/pl011/src/lib.rs
+++ /dev/null
@@ -1,586 +0,0 @@
-// Copyright 2024, Linaro Limited
-// Author(s): Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
-// SPDX-License-Identifier: GPL-2.0-or-later
-//
-// PL011 QEMU Device Model
-//
-// This library implements a device model for the PrimeCell® UART (PL011)
-// device in QEMU.
-//
-#![doc = include_str!("../README.md")]
-//! # Library crate
-//!
-//! See [`PL011State`](crate::device::PL011State) for the device model type and
-//! the [`registers`] module for register types.
-
-#![deny(
- rustdoc::broken_intra_doc_links,
- rustdoc::redundant_explicit_links,
- clippy::correctness,
- clippy::suspicious,
- clippy::complexity,
- clippy::perf,
- clippy::cargo,
- clippy::nursery,
- clippy::style,
- // restriction group
- clippy::dbg_macro,
- clippy::as_underscore,
- clippy::assertions_on_result_states,
- // pedantic group
- clippy::doc_markdown,
- clippy::borrow_as_ptr,
- clippy::cast_lossless,
- clippy::option_if_let_else,
- clippy::missing_const_for_fn,
- clippy::cognitive_complexity,
- clippy::missing_safety_doc,
- )]
-
-extern crate bilge;
-extern crate bilge_impl;
-extern crate qemu_api;
-
-pub mod device;
-pub mod device_class;
-pub mod memory_ops;
-
-pub const TYPE_PL011: &::core::ffi::CStr = c"pl011";
-
-/// Offset of each register from the base memory address of the device.
-///
-/// # Source
-/// ARM DDI 0183G, Table 3-1 p.3-3
-#[doc(alias = "offset")]
-#[allow(non_camel_case_types)]
-#[repr(u64)]
-#[derive(Debug)]
-pub enum RegisterOffset {
- /// Data Register
- ///
- /// A write to this register initiates the actual data transmission
- #[doc(alias = "UARTDR")]
- DR = 0x000,
- /// Receive Status Register or Error Clear Register
- #[doc(alias = "UARTRSR")]
- #[doc(alias = "UARTECR")]
- RSR = 0x004,
- /// Flag Register
- ///
- /// A read of this register shows if transmission is complete
- #[doc(alias = "UARTFR")]
- FR = 0x018,
- /// Fractional Baud Rate Register
- ///
- /// responsible for baud rate speed
- #[doc(alias = "UARTFBRD")]
- FBRD = 0x028,
- /// `IrDA` Low-Power Counter Register
- #[doc(alias = "UARTILPR")]
- ILPR = 0x020,
- /// Integer Baud Rate Register
- ///
- /// Responsible for baud rate speed
- #[doc(alias = "UARTIBRD")]
- IBRD = 0x024,
- /// line control register (data frame format)
- #[doc(alias = "UARTLCR_H")]
- LCR_H = 0x02C,
- /// Toggle UART, transmission or reception
- #[doc(alias = "UARTCR")]
- CR = 0x030,
- /// Interrupt FIFO Level Select Register
- #[doc(alias = "UARTIFLS")]
- FLS = 0x034,
- /// Interrupt Mask Set/Clear Register
- #[doc(alias = "UARTIMSC")]
- IMSC = 0x038,
- /// Raw Interrupt Status Register
- #[doc(alias = "UARTRIS")]
- RIS = 0x03C,
- /// Masked Interrupt Status Register
- #[doc(alias = "UARTMIS")]
- MIS = 0x040,
- /// Interrupt Clear Register
- #[doc(alias = "UARTICR")]
- ICR = 0x044,
- /// DMA control Register
- #[doc(alias = "UARTDMACR")]
- DMACR = 0x048,
- ///// Reserved, offsets `0x04C` to `0x07C`.
- //Reserved = 0x04C,
-}
-
-impl core::convert::TryFrom<u64> for RegisterOffset {
- type Error = u64;
-
- fn try_from(value: u64) -> Result<Self, Self::Error> {
- macro_rules! case {
- ($($discriminant:ident),*$(,)*) => {
- /* check that matching on all macro arguments compiles, which means we are not
- * missing any enum value; if the type definition ever changes this will stop
- * compiling.
- */
- const fn _assert_exhaustive(val: RegisterOffset) {
- match val {
- $(RegisterOffset::$discriminant => (),)*
- }
- }
-
- match value {
- $(x if x == Self::$discriminant as u64 => Ok(Self::$discriminant),)*
- _ => Err(value),
- }
- }
- }
- case! { DR, RSR, FR, FBRD, ILPR, IBRD, LCR_H, CR, FLS, IMSC, RIS, MIS, ICR, DMACR }
- }
-}
-
-pub mod registers {
- //! Device registers exposed as typed structs which are backed by arbitrary
- //! integer bitmaps. [`Data`], [`Control`], [`LineControl`], etc.
- //!
- //! All PL011 registers are essentially 32-bit wide, but are typed here as
- //! bitmaps with only the necessary width. That is, if a struct bitmap
- //! in this module is for example 16 bits long, it should be conceived
- //! as a 32-bit register where the unmentioned higher bits are always
- //! unused thus treated as zero when read or written.
- use bilge::prelude::*;
-
- // TODO: FIFO Mode has different semantics
- /// Data Register, `UARTDR`
- ///
- /// The `UARTDR` register is the data register.
- ///
- /// For words to be transmitted:
- ///
- /// - if the FIFOs are enabled, data written to this location is pushed onto
- /// the transmit
- /// FIFO
- /// - if the FIFOs are not enabled, data is stored in the transmitter
- /// holding register (the
- /// bottom word of the transmit FIFO).
- ///
- /// The write operation initiates transmission from the UART. The data is
- /// prefixed with a start bit, appended with the appropriate parity bit
- /// (if parity is enabled), and a stop bit. The resultant word is then
- /// transmitted.
- ///
- /// For received words:
- ///
- /// - if the FIFOs are enabled, the data byte and the 4-bit status (break,
- /// frame, parity,
- /// and overrun) is pushed onto the 12-bit wide receive FIFO
- /// - if the FIFOs are not enabled, the data byte and status are stored in
- /// the receiving
- /// holding register (the bottom word of the receive FIFO).
- ///
- /// The received data byte is read by performing reads from the `UARTDR`
- /// register along with the corresponding status information. The status
- /// information can also be read by a read of the `UARTRSR/UARTECR`
- /// register.
- ///
- /// # Note
- ///
- /// You must disable the UART before any of the control registers are
- /// reprogrammed. When the UART is disabled in the middle of
- /// transmission or reception, it completes the current character before
- /// stopping.
- ///
- /// # Source
- /// ARM DDI 0183G 3.3.1 Data Register, UARTDR
- #[bitsize(16)]
- #[derive(Clone, Copy, DebugBits, FromBits)]
- #[doc(alias = "UARTDR")]
- pub struct Data {
- _reserved: u4,
- pub data: u8,
- pub framing_error: bool,
- pub parity_error: bool,
- pub break_error: bool,
- pub overrun_error: bool,
- }
-
- // TODO: FIFO Mode has different semantics
- /// Receive Status Register / Error Clear Register, `UARTRSR/UARTECR`
- ///
- /// The UARTRSR/UARTECR register is the receive status register/error clear
- /// register. Receive status can also be read from the `UARTRSR`
- /// register. If the status is read from this register, then the status
- /// information for break, framing and parity corresponds to the
- /// data character read from the [Data register](Data), `UARTDR` prior to
- /// reading the UARTRSR register. The status information for overrun is
- /// set immediately when an overrun condition occurs.
- ///
- ///
- /// # Note
- /// The received data character must be read first from the [Data
- /// Register](Data), `UARTDR` before reading the error status associated
- /// with that data character from the `UARTRSR` register. This read
- /// sequence cannot be reversed, because the `UARTRSR` register is
- /// updated only when a read occurs from the `UARTDR` register. However,
- /// the status information can also be obtained by reading the `UARTDR`
- /// register
- ///
- /// # Source
- /// ARM DDI 0183G 3.3.2 Receive Status Register/Error Clear Register,
- /// UARTRSR/UARTECR
- #[bitsize(8)]
- #[derive(Clone, Copy, DebugBits, FromBits)]
- pub struct ReceiveStatusErrorClear {
- pub framing_error: bool,
- pub parity_error: bool,
- pub break_error: bool,
- pub overrun_error: bool,
- _reserved_unpredictable: u4,
- }
-
- impl ReceiveStatusErrorClear {
- pub fn reset(&mut self) {
- // All the bits are cleared to 0 on reset.
- *self = 0.into();
- }
- }
-
- impl Default for ReceiveStatusErrorClear {
- fn default() -> Self {
- 0.into()
- }
- }
-
- #[bitsize(16)]
- #[derive(Clone, Copy, DebugBits, FromBits)]
- /// Flag Register, `UARTFR`
- #[doc(alias = "UARTFR")]
- pub struct Flags {
- /// CTS Clear to send. This bit is the complement of the UART clear to
- /// send, `nUARTCTS`, modem status input. That is, the bit is 1
- /// when `nUARTCTS` is LOW.
- pub clear_to_send: bool,
- /// DSR Data set ready. This bit is the complement of the UART data set
- /// ready, `nUARTDSR`, modem status input. That is, the bit is 1 when
- /// `nUARTDSR` is LOW.
- pub data_set_ready: bool,
- /// DCD Data carrier detect. This bit is the complement of the UART data
- /// carrier detect, `nUARTDCD`, modem status input. That is, the bit is
- /// 1 when `nUARTDCD` is LOW.
- pub data_carrier_detect: bool,
- /// BUSY UART busy. If this bit is set to 1, the UART is busy
- /// transmitting data. This bit remains set until the complete
- /// byte, including all the stop bits, has been sent from the
- /// shift register. This bit is set as soon as the transmit FIFO
- /// becomes non-empty, regardless of whether the UART is enabled
- /// or not.
- pub busy: bool,
- /// RXFE Receive FIFO empty. The meaning of this bit depends on the
- /// state of the FEN bit in the UARTLCR_H register. If the FIFO
- /// is disabled, this bit is set when the receive holding
- /// register is empty. If the FIFO is enabled, the RXFE bit is
- /// set when the receive FIFO is empty.
- pub receive_fifo_empty: bool,
- /// TXFF Transmit FIFO full. The meaning of this bit depends on the
- /// state of the FEN bit in the UARTLCR_H register. If the FIFO
- /// is disabled, this bit is set when the transmit holding
- /// register is full. If the FIFO is enabled, the TXFF bit is
- /// set when the transmit FIFO is full.
- pub transmit_fifo_full: bool,
- /// RXFF Receive FIFO full. The meaning of this bit depends on the state
- /// of the FEN bit in the UARTLCR_H register. If the FIFO is
- /// disabled, this bit is set when the receive holding register
- /// is full. If the FIFO is enabled, the RXFF bit is set when
- /// the receive FIFO is full.
- pub receive_fifo_full: bool,
- /// Transmit FIFO empty. The meaning of this bit depends on the state of
- /// the FEN bit in the [Line Control register](LineControl),
- /// `UARTLCR_H`. If the FIFO is disabled, this bit is set when the
- /// transmit holding register is empty. If the FIFO is enabled,
- /// the TXFE bit is set when the transmit FIFO is empty. This
- /// bit does not indicate if there is data in the transmit shift
- /// register.
- pub transmit_fifo_empty: bool,
- /// `RI`, is `true` when `nUARTRI` is `LOW`.
- pub ring_indicator: bool,
- _reserved_zero_no_modify: u7,
- }
-
- impl Flags {
- pub fn reset(&mut self) {
- // After reset TXFF, RXFF, and BUSY are 0, and TXFE and RXFE are 1
- self.set_receive_fifo_full(false);
- self.set_transmit_fifo_full(false);
- self.set_busy(false);
- self.set_receive_fifo_empty(true);
- self.set_transmit_fifo_empty(true);
- }
- }
-
- impl Default for Flags {
- fn default() -> Self {
- let mut ret: Self = 0.into();
- ret.reset();
- ret
- }
- }
-
- #[bitsize(16)]
- #[derive(Clone, Copy, DebugBits, FromBits)]
- /// Line Control Register, `UARTLCR_H`
- #[doc(alias = "UARTLCR_H")]
- pub struct LineControl {
- /// 15:8 - Reserved, do not modify, read as zero.
- _reserved_zero_no_modify: u8,
- /// 7 SPS Stick parity select.
- /// 0 = stick parity is disabled
- /// 1 = either:
- /// • if the EPS bit is 0 then the parity bit is transmitted and checked
- /// as a 1 • if the EPS bit is 1 then the parity bit is
- /// transmitted and checked as a 0. This bit has no effect when
- /// the PEN bit disables parity checking and generation. See Table 3-11
- /// on page 3-14 for the parity truth table.
- pub sticky_parity: bool,
- /// WLEN Word length. These bits indicate the number of data bits
- /// transmitted or received in a frame as follows: b11 = 8 bits
- /// b10 = 7 bits
- /// b01 = 6 bits
- /// b00 = 5 bits.
- pub word_length: WordLength,
- /// FEN Enable FIFOs:
- /// 0 = FIFOs are disabled (character mode) that is, the FIFOs become
- /// 1-byte-deep holding registers 1 = transmit and receive FIFO
- /// buffers are enabled (FIFO mode).
- pub fifos_enabled: Mode,
- /// 3 STP2 Two stop bits select. If this bit is set to 1, two stop bits
- /// are transmitted at the end of the frame. The receive
- /// logic does not check for two stop bits being received.
- pub two_stops_bits: bool,
- /// EPS Even parity select. Controls the type of parity the UART uses
- /// during transmission and reception:
- /// - 0 = odd parity. The UART generates or checks for an odd number of
- /// 1s in the data and parity bits.
- /// - 1 = even parity. The UART generates or checks for an even number
- /// of 1s in the data and parity bits.
- /// This bit has no effect when the `PEN` bit disables parity checking
- /// and generation. See Table 3-11 on page 3-14 for the parity
- /// truth table.
- pub parity: Parity,
- /// 1 PEN Parity enable:
- ///
- /// - 0 = parity is disabled and no parity bit added to the data frame
- /// - 1 = parity checking and generation is enabled.
- ///
- /// See Table 3-11 on page 3-14 for the parity truth table.
- pub parity_enabled: bool,
- /// BRK Send break.
- ///
- /// If this bit is set to `1`, a low-level is continually output on the
- /// `UARTTXD` output, after completing transmission of the
- /// current character. For the proper execution of the break command,
- /// the software must set this bit for at least two complete
- /// frames. For normal use, this bit must be cleared to `0`.
- pub send_break: bool,
- }
-
- impl LineControl {
- pub fn reset(&mut self) {
- // All the bits are cleared to 0 when reset.
- *self = 0.into();
- }
- }
-
- impl Default for LineControl {
- fn default() -> Self {
- 0.into()
- }
- }
-
- #[bitsize(1)]
- #[derive(Clone, Copy, Debug, Eq, FromBits, PartialEq)]
- /// `EPS` "Even parity select", field of [Line Control
- /// register](LineControl).
- pub enum Parity {
- /// - 0 = odd parity. The UART generates or checks for an odd number of
- /// 1s in the data and parity bits.
- Odd = 0,
- /// - 1 = even parity. The UART generates or checks for an even number
- /// of 1s in the data and parity bits.
- Even = 1,
- }
-
- #[bitsize(1)]
- #[derive(Clone, Copy, Debug, Eq, FromBits, PartialEq)]
- /// `FEN` "Enable FIFOs" or Device mode, field of [Line Control
- /// register](LineControl).
- pub enum Mode {
- /// 0 = FIFOs are disabled (character mode) that is, the FIFOs become
- /// 1-byte-deep holding registers
- Character = 0,
- /// 1 = transmit and receive FIFO buffers are enabled (FIFO mode).
- FIFO = 1,
- }
-
- impl From<Mode> for bool {
- fn from(val: Mode) -> Self {
- matches!(val, Mode::FIFO)
- }
- }
-
- #[bitsize(2)]
- #[derive(Clone, Copy, Debug, Eq, FromBits, PartialEq)]
- /// `WLEN` Word length, field of [Line Control register](LineControl).
- ///
- /// These bits indicate the number of data bits transmitted or received in a
- /// frame as follows:
- pub enum WordLength {
- /// b11 = 8 bits
- _8Bits = 0b11,
- /// b10 = 7 bits
- _7Bits = 0b10,
- /// b01 = 6 bits
- _6Bits = 0b01,
- /// b00 = 5 bits.
- _5Bits = 0b00,
- }
-
- /// Control Register, `UARTCR`
- ///
- /// The `UARTCR` register is the control register. All the bits are cleared
- /// to `0` on reset except for bits `9` and `8` that are set to `1`.
- ///
- /// # Source
- /// ARM DDI 0183G, 3.3.8 Control Register, `UARTCR`, Table 3-12
- #[bitsize(16)]
- #[doc(alias = "UARTCR")]
- #[derive(Clone, Copy, DebugBits, FromBits)]
- pub struct Control {
- /// `UARTEN` UART enable: 0 = UART is disabled. If the UART is disabled
- /// in the middle of transmission or reception, it completes the current
- /// character before stopping. 1 = the UART is enabled. Data
- /// transmission and reception occurs for either UART signals or SIR
- /// signals depending on the setting of the SIREN bit.
- pub enable_uart: bool,
- /// `SIREN` `SIR` enable: 0 = IrDA SIR ENDEC is disabled. `nSIROUT`
- /// remains LOW (no light pulse generated), and signal transitions on
- /// SIRIN have no effect. 1 = IrDA SIR ENDEC is enabled. Data is
- /// transmitted and received on nSIROUT and SIRIN. UARTTXD remains HIGH,
- /// in the marking state. Signal transitions on UARTRXD or modem status
- /// inputs have no effect. This bit has no effect if the UARTEN bit
- /// disables the UART.
- pub enable_sir: bool,
- /// `SIRLP` SIR low-power IrDA mode. This bit selects the IrDA encoding
- /// mode. If this bit is cleared to 0, low-level bits are transmitted as
- /// an active high pulse with a width of 3/ 16th of the bit period. If
- /// this bit is set to 1, low-level bits are transmitted with a pulse
- /// width that is 3 times the period of the IrLPBaud16 input signal,
- /// regardless of the selected bit rate. Setting this bit uses less
- /// power, but might reduce transmission distances.
- pub sir_lowpower_irda_mode: u1,
- /// Reserved, do not modify, read as zero.
- _reserved_zero_no_modify: u4,
- /// `LBE` Loopback enable. If this bit is set to 1 and the SIREN bit is
- /// set to 1 and the SIRTEST bit in the Test Control register, UARTTCR
- /// on page 4-5 is set to 1, then the nSIROUT path is inverted, and fed
- /// through to the SIRIN path. The SIRTEST bit in the test register must
- /// be set to 1 to override the normal half-duplex SIR operation. This
- /// must be the requirement for accessing the test registers during
- /// normal operation, and SIRTEST must be cleared to 0 when loopback
- /// testing is finished. This feature reduces the amount of external
- /// coupling required during system test. If this bit is set to 1, and
- /// the SIRTEST bit is set to 0, the UARTTXD path is fed through to the
- /// UARTRXD path. In either SIR mode or UART mode, when this bit is set,
- /// the modem outputs are also fed through to the modem inputs. This bit
- /// is cleared to 0 on reset, to disable loopback.
- pub enable_loopback: bool,
- /// `TXE` Transmit enable. If this bit is set to 1, the transmit section
- /// of the UART is enabled. Data transmission occurs for either UART
- /// signals, or SIR signals depending on the setting of the SIREN bit.
- /// When the UART is disabled in the middle of transmission, it
- /// completes the current character before stopping.
- pub enable_transmit: bool,
- /// `RXE` Receive enable. If this bit is set to 1, the receive section
- /// of the UART is enabled. Data reception occurs for either UART
- /// signals or SIR signals depending on the setting of the SIREN bit.
- /// When the UART is disabled in the middle of reception, it completes
- /// the current character before stopping.
- pub enable_receive: bool,
- /// `DTR` Data transmit ready. This bit is the complement of the UART
- /// data transmit ready, `nUARTDTR`, modem status output. That is, when
- /// the bit is programmed to a 1 then `nUARTDTR` is LOW.
- pub data_transmit_ready: bool,
- /// `RTS` Request to send. This bit is the complement of the UART
- /// request to send, `nUARTRTS`, modem status output. That is, when the
- /// bit is programmed to a 1 then `nUARTRTS` is LOW.
- pub request_to_send: bool,
- /// `Out1` This bit is the complement of the UART Out1 (`nUARTOut1`)
- /// modem status output. That is, when the bit is programmed to a 1 the
- /// output is 0. For DTE this can be used as Data Carrier Detect (DCD).
- pub out_1: bool,
- /// `Out2` This bit is the complement of the UART Out2 (`nUARTOut2`)
- /// modem status output. That is, when the bit is programmed to a 1, the
- /// output is 0. For DTE this can be used as Ring Indicator (RI).
- pub out_2: bool,
- /// `RTSEn` RTS hardware flow control enable. If this bit is set to 1,
- /// RTS hardware flow control is enabled. Data is only requested when
- /// there is space in the receive FIFO for it to be received.
- pub rts_hardware_flow_control_enable: bool,
- /// `CTSEn` CTS hardware flow control enable. If this bit is set to 1,
- /// CTS hardware flow control is enabled. Data is only transmitted when
- /// the `nUARTCTS` signal is asserted.
- pub cts_hardware_flow_control_enable: bool,
- }
-
- impl Control {
- pub fn reset(&mut self) {
- *self = 0.into();
- self.set_enable_receive(true);
- self.set_enable_transmit(true);
- }
- }
-
- impl Default for Control {
- fn default() -> Self {
- let mut ret: Self = 0.into();
- ret.reset();
- ret
- }
- }
-
- /// Interrupt status bits in UARTRIS, UARTMIS, UARTIMSC
- pub const INT_OE: u32 = 1 << 10;
- pub const INT_BE: u32 = 1 << 9;
- pub const INT_PE: u32 = 1 << 8;
- pub const INT_FE: u32 = 1 << 7;
- pub const INT_RT: u32 = 1 << 6;
- pub const INT_TX: u32 = 1 << 5;
- pub const INT_RX: u32 = 1 << 4;
- pub const INT_DSR: u32 = 1 << 3;
- pub const INT_DCD: u32 = 1 << 2;
- pub const INT_CTS: u32 = 1 << 1;
- pub const INT_RI: u32 = 1 << 0;
- pub const INT_E: u32 = INT_OE | INT_BE | INT_PE | INT_FE;
- pub const INT_MS: u32 = INT_RI | INT_DSR | INT_DCD | INT_CTS;
-
- #[repr(u32)]
- pub enum Interrupt {
- OE = 1 << 10,
- BE = 1 << 9,
- PE = 1 << 8,
- FE = 1 << 7,
- RT = 1 << 6,
- TX = 1 << 5,
- RX = 1 << 4,
- DSR = 1 << 3,
- DCD = 1 << 2,
- CTS = 1 << 1,
- RI = 1 << 0,
- }
-
- impl Interrupt {
- pub const E: u32 = INT_OE | INT_BE | INT_PE | INT_FE;
- pub const MS: u32 = INT_RI | INT_DSR | INT_DCD | INT_CTS;
- }
-}
-
-// TODO: You must disable the UART before any of the control registers are
-// reprogrammed. When the UART is disabled in the middle of transmission or
-// reception, it completes the current character before stopping
diff --git a/rust/hw/char/pl011/src/memory_ops.rs b/rust/hw/char/pl011/src/memory_ops.rs
deleted file mode 100644
index 8d066eb..0000000
--- a/rust/hw/char/pl011/src/memory_ops.rs
+++ /dev/null
@@ -1,59 +0,0 @@
-// Copyright 2024, Linaro Limited
-// Author(s): Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-use core::{mem::MaybeUninit, ptr::NonNull};
-
-use qemu_api::bindings::*;
-
-use crate::device::PL011State;
-
-pub static PL011_OPS: MemoryRegionOps = MemoryRegionOps {
- read: Some(pl011_read),
- write: Some(pl011_write),
- read_with_attrs: None,
- write_with_attrs: None,
- endianness: device_endian::DEVICE_NATIVE_ENDIAN,
- valid: unsafe { MaybeUninit::<MemoryRegionOps__bindgen_ty_1>::zeroed().assume_init() },
- impl_: MemoryRegionOps__bindgen_ty_2 {
- min_access_size: 4,
- max_access_size: 4,
- ..unsafe { MaybeUninit::<MemoryRegionOps__bindgen_ty_2>::zeroed().assume_init() }
- },
-};
-
-#[no_mangle]
-unsafe extern "C" fn pl011_read(
- opaque: *mut core::ffi::c_void,
- addr: hwaddr,
- size: core::ffi::c_uint,
-) -> u64 {
- assert!(!opaque.is_null());
- let mut state = unsafe { NonNull::new_unchecked(opaque.cast::<PL011State>()) };
- let val = unsafe { state.as_mut().read(addr, size) };
- match val {
- std::ops::ControlFlow::Break(val) => val,
- std::ops::ControlFlow::Continue(val) => {
- // SAFETY: self.char_backend is a valid CharBackend instance after it's been
- // initialized in realize().
- let cb_ptr = unsafe { core::ptr::addr_of_mut!(state.as_mut().char_backend) };
- unsafe { qemu_chr_fe_accept_input(cb_ptr) };
-
- val
- }
- }
-}
-
-#[no_mangle]
-unsafe extern "C" fn pl011_write(
- opaque: *mut core::ffi::c_void,
- addr: hwaddr,
- data: u64,
- _size: core::ffi::c_uint,
-) {
- unsafe {
- assert!(!opaque.is_null());
- let mut state = NonNull::new_unchecked(opaque.cast::<PL011State>());
- state.as_mut().write(addr, data)
- }
-}
diff --git a/rust/hw/meson.build b/rust/hw/meson.build
deleted file mode 100644
index 8601966..0000000
--- a/rust/hw/meson.build
+++ /dev/null
@@ -1 +0,0 @@
-subdir('char')
diff --git a/rust/meson.build b/rust/meson.build
index def7738..7a32b1b 100644
--- a/rust/meson.build
+++ b/rust/meson.build
@@ -1,4 +1,2 @@
subdir('qemu-api-macros')
subdir('qemu-api')
-
-subdir('hw')
diff --git a/scripts/archive-source.sh b/scripts/archive-source.sh
index 30677c3..62a2cf4 100755
--- a/scripts/archive-source.sh
+++ b/scripts/archive-source.sh
@@ -27,9 +27,7 @@
# in their checkout, because the build environment is completely
# different to the host OS.
subprojects="keycodemapdb libvfio-user berkeley-softfloat-3
- berkeley-testfloat-3 arbitrary-int-1-rs bilge-0.2-rs
- bilge-impl-0.2-rs either-1-rs itertools-0.11-rs proc-macro2-1-rs
- proc-macro-error-1-rs proc-macro-error-attr-1-rs quote-1-rs
+ berkeley-testfloat-3 proc-macro2-1-rs quote-1-rs
syn-2-rs unicode-ident-1-rs"
sub_deinit=""
diff --git a/scripts/make-release b/scripts/make-release
index 8dc9391..cf7d694 100755
--- a/scripts/make-release
+++ b/scripts/make-release
@@ -18,9 +18,7 @@
# Only include wraps that are invoked with subproject()
SUBPROJECTS="libvfio-user keycodemapdb berkeley-softfloat-3
- berkeley-testfloat-3 arbitrary-int-1-rs bilge-0.2-rs
- bilge-impl-0.2-rs either-1-rs itertools-0.11-rs proc-macro2-1-rs
- proc-macro-error-1-rs proc-macro-error-attr-1-rs quote-1-rs
+ berkeley-testfloat-3 proc-macro2-1-rs quote-1-rs
syn-2-rs unicode-ident-1-rs"
src="$1"
diff --git a/scripts/rust/rust_root_crate.sh b/scripts/rust/rust_root_crate.sh
deleted file mode 100755
index 975bddf..0000000
--- a/scripts/rust/rust_root_crate.sh
+++ /dev/null
@@ -1,13 +0,0 @@
-#!/bin/sh
-
-set -eu
-
-cat <<EOF
-// @generated
-// This file is autogenerated by scripts/rust_root_crate.sh
-
-EOF
-
-for crate in $*; do
- echo "extern crate $crate;"
-done
diff --git a/subprojects/.gitignore b/subprojects/.gitignore
index 50f173f..b688818 100644
--- a/subprojects/.gitignore
+++ b/subprojects/.gitignore
@@ -6,13 +6,6 @@
/keycodemapdb
/libvfio-user
/slirp
-/arbitrary-int-1.2.7
-/bilge-0.2.0
-/bilge-impl-0.2.0
-/either-1.12.0
-/itertools-0.11.0
-/proc-macro-error-1.0.4
-/proc-macro-error-attr-1.0.4
/proc-macro2-1.0.84
/quote-1.0.36
/syn-2.0.66
diff --git a/subprojects/arbitrary-int-1-rs.wrap b/subprojects/arbitrary-int-1-rs.wrap
deleted file mode 100644
index e580538..0000000
--- a/subprojects/arbitrary-int-1-rs.wrap
+++ /dev/null
@@ -1,7 +0,0 @@
-[wrap-file]
-directory = arbitrary-int-1.2.7
-source_url = https://crates.io/api/v1/crates/arbitrary-int/1.2.7/download
-source_filename = arbitrary-int-1.2.7.tar.gz
-source_hash = c84fc003e338a6f69fbd4f7fe9f92b535ff13e9af8997f3b14b6ddff8b1df46d
-#method = cargo
-patch_directory = arbitrary-int-1-rs
diff --git a/subprojects/bilge-0.2-rs.wrap b/subprojects/bilge-0.2-rs.wrap
deleted file mode 100644
index 7a4339d..0000000
--- a/subprojects/bilge-0.2-rs.wrap
+++ /dev/null
@@ -1,7 +0,0 @@
-[wrap-file]
-directory = bilge-0.2.0
-source_url = https://crates.io/api/v1/crates/bilge/0.2.0/download
-source_filename = bilge-0.2.0.tar.gz
-source_hash = dc707ed8ebf81de5cd6c7f48f54b4c8621760926cdf35a57000747c512e67b57
-#method = cargo
-patch_directory = bilge-0.2-rs
diff --git a/subprojects/bilge-impl-0.2-rs.wrap b/subprojects/bilge-impl-0.2-rs.wrap
deleted file mode 100644
index eefb10c..0000000
--- a/subprojects/bilge-impl-0.2-rs.wrap
+++ /dev/null
@@ -1,7 +0,0 @@
-[wrap-file]
-directory = bilge-impl-0.2.0
-source_url = https://crates.io/api/v1/crates/bilge-impl/0.2.0/download
-source_filename = bilge-impl-0.2.0.tar.gz
-source_hash = feb11e002038ad243af39c2068c8a72bcf147acf05025dcdb916fcc000adb2d8
-#method = cargo
-patch_directory = bilge-impl-0.2-rs
diff --git a/subprojects/either-1-rs.wrap b/subprojects/either-1-rs.wrap
deleted file mode 100644
index 6046712..0000000
--- a/subprojects/either-1-rs.wrap
+++ /dev/null
@@ -1,7 +0,0 @@
-[wrap-file]
-directory = either-1.12.0
-source_url = https://crates.io/api/v1/crates/either/1.12.0/download
-source_filename = either-1.12.0.tar.gz
-source_hash = 3dca9240753cf90908d7e4aac30f630662b02aebaa1b58a3cadabdb23385b58b
-#method = cargo
-patch_directory = either-1-rs
diff --git a/subprojects/itertools-0.11-rs.wrap b/subprojects/itertools-0.11-rs.wrap
deleted file mode 100644
index 66b0525..0000000
--- a/subprojects/itertools-0.11-rs.wrap
+++ /dev/null
@@ -1,7 +0,0 @@
-[wrap-file]
-directory = itertools-0.11.0
-source_url = https://crates.io/api/v1/crates/itertools/0.11.0/download
-source_filename = itertools-0.11.0.tar.gz
-source_hash = b1c173a5686ce8bfa551b3563d0c2170bf24ca44da99c7ca4bfdab5418c3fe57
-#method = cargo
-patch_directory = itertools-0.11-rs
diff --git a/subprojects/packagefiles/arbitrary-int-1-rs/meson.build b/subprojects/packagefiles/arbitrary-int-1-rs/meson.build
deleted file mode 100644
index 34a189c..0000000
--- a/subprojects/packagefiles/arbitrary-int-1-rs/meson.build
+++ /dev/null
@@ -1,19 +0,0 @@
-project('arbitrary-int-1-rs', 'rust',
- version: '1.2.7',
- license: 'MIT',
- default_options: [])
-
-_arbitrary_int_rs = static_library(
- 'arbitrary_int',
- files('src/lib.rs'),
- gnu_symbol_visibility: 'hidden',
- override_options: ['rust_std=2021', 'build.rust_std=2021'],
- rust_abi: 'rust',
- dependencies: [],
-)
-
-arbitrary_int_dep = declare_dependency(
- link_with: _arbitrary_int_rs,
-)
-
-meson.override_dependency('arbitrary-int-1-rs', arbitrary_int_dep)
diff --git a/subprojects/packagefiles/bilge-0.2-rs/meson.build b/subprojects/packagefiles/bilge-0.2-rs/meson.build
deleted file mode 100644
index a6ed4a8..0000000
--- a/subprojects/packagefiles/bilge-0.2-rs/meson.build
+++ /dev/null
@@ -1,29 +0,0 @@
-project(
- 'bilge-0.2-rs',
- 'rust',
- version : '0.2.0',
- license : 'MIT or Apache-2.0',
-)
-
-subproject('arbitrary-int-1-rs', required: true)
-subproject('bilge-impl-0.2-rs', required: true)
-
-arbitrary_int_dep = dependency('arbitrary-int-1-rs')
-bilge_impl_dep = dependency('bilge-impl-0.2-rs')
-
-lib = static_library(
- 'bilge',
- 'src/lib.rs',
- override_options : ['rust_std=2021', 'build.rust_std=2021'],
- rust_abi : 'rust',
- dependencies: [
- arbitrary_int_dep,
- bilge_impl_dep,
- ],
-)
-
-bilge_dep = declare_dependency(
- link_with : [lib],
-)
-
-meson.override_dependency('bilge-0.2-rs', bilge_dep)
diff --git a/subprojects/packagefiles/bilge-impl-0.2-rs/meson.build b/subprojects/packagefiles/bilge-impl-0.2-rs/meson.build
deleted file mode 100644
index 80243c7..0000000
--- a/subprojects/packagefiles/bilge-impl-0.2-rs/meson.build
+++ /dev/null
@@ -1,45 +0,0 @@
-project('bilge-impl-0.2-rs', 'rust',
- version: '0.2.0',
- license: 'MIT OR Apache-2.0',
- default_options: [])
-
-subproject('itertools-0.11-rs', required: true)
-subproject('proc-macro-error-attr-1-rs', required: true)
-subproject('proc-macro-error-1-rs', required: true)
-subproject('quote-1-rs', required: true)
-subproject('syn-2-rs', required: true)
-subproject('proc-macro2-1-rs', required: true)
-
-itertools_dep = dependency('itertools-0.11-rs', native: true)
-proc_macro_error_attr_dep = dependency('proc-macro-error-attr-1-rs', native: true)
-proc_macro_error_dep = dependency('proc-macro-error-1-rs', native: true)
-quote_dep = dependency('quote-1-rs', native: true)
-syn_dep = dependency('syn-2-rs', native: true)
-proc_macro2_dep = dependency('proc-macro2-1-rs', native: true)
-
-rust = import('rust')
-
-_bilge_impl_rs = rust.proc_macro(
- 'bilge_impl',
- files('src/lib.rs'),
- override_options: ['rust_std=2021', 'build.rust_std=2021'],
- rust_args: [
- '--cfg', 'use_fallback',
- '--cfg', 'feature="syn-error"',
- '--cfg', 'feature="proc-macro"',
- ],
- dependencies: [
- itertools_dep,
- proc_macro_error_attr_dep,
- proc_macro_error_dep,
- quote_dep,
- syn_dep,
- proc_macro2_dep,
- ],
-)
-
-bilge_impl_dep = declare_dependency(
- link_with: _bilge_impl_rs,
-)
-
-meson.override_dependency('bilge-impl-0.2-rs', bilge_impl_dep)
diff --git a/subprojects/packagefiles/either-1-rs/meson.build b/subprojects/packagefiles/either-1-rs/meson.build
deleted file mode 100644
index a5842eb..0000000
--- a/subprojects/packagefiles/either-1-rs/meson.build
+++ /dev/null
@@ -1,24 +0,0 @@
-project('either-1-rs', 'rust',
- version: '1.12.0',
- license: 'MIT OR Apache-2.0',
- default_options: [])
-
-_either_rs = static_library(
- 'either',
- files('src/lib.rs'),
- gnu_symbol_visibility: 'hidden',
- override_options: ['rust_std=2018', 'build.rust_std=2018'],
- rust_abi: 'rust',
- rust_args: [
- '--cfg', 'feature="use_std"',
- '--cfg', 'feature="use_alloc"',
- ],
- dependencies: [],
- native: true,
-)
-
-either_dep = declare_dependency(
- link_with: _either_rs,
-)
-
-meson.override_dependency('either-1-rs', either_dep, native: true)
diff --git a/subprojects/packagefiles/itertools-0.11-rs/meson.build b/subprojects/packagefiles/itertools-0.11-rs/meson.build
deleted file mode 100644
index 13d2d27..0000000
--- a/subprojects/packagefiles/itertools-0.11-rs/meson.build
+++ /dev/null
@@ -1,30 +0,0 @@
-project('itertools-0.11-rs', 'rust',
- version: '0.11.0',
- license: 'MIT OR Apache-2.0',
- default_options: [])
-
-subproject('either-1-rs', required: true)
-
-either_dep = dependency('either-1-rs', native: true)
-
-_itertools_rs = static_library(
- 'itertools',
- files('src/lib.rs'),
- gnu_symbol_visibility: 'hidden',
- override_options: ['rust_std=2018', 'build.rust_std=2018'],
- rust_abi: 'rust',
- rust_args: [
- '--cfg', 'feature="use_std"',
- '--cfg', 'feature="use_alloc"',
- ],
- dependencies: [
- either_dep,
- ],
- native: true,
-)
-
-itertools_dep = declare_dependency(
- link_with: _itertools_rs,
-)
-
-meson.override_dependency('itertools-0.11-rs', itertools_dep, native: true)
diff --git a/subprojects/packagefiles/proc-macro-error-1-rs/meson.build b/subprojects/packagefiles/proc-macro-error-1-rs/meson.build
deleted file mode 100644
index 38ea7b8..0000000
--- a/subprojects/packagefiles/proc-macro-error-1-rs/meson.build
+++ /dev/null
@@ -1,40 +0,0 @@
-project('proc-macro-error-1-rs', 'rust',
- version: '1.0.4',
- license: 'MIT OR Apache-2.0',
- default_options: [])
-
-subproject('proc-macro-error-attr-1-rs', required: true)
-subproject('quote-1-rs', required: true)
-subproject('syn-2-rs', required: true)
-subproject('proc-macro2-1-rs', required: true)
-
-proc_macro_error_attr_dep = dependency('proc-macro-error-attr-1-rs', native: true)
-proc_macro2_dep = dependency('proc-macro2-1-rs', native: true)
-quote_dep = dependency('quote-1-rs', native: true)
-syn_dep = dependency('syn-2-rs', native: true)
-
-_proc_macro_error_rs = static_library(
- 'proc_macro_error',
- files('src/lib.rs'),
- override_options: ['rust_std=2018', 'build.rust_std=2018'],
- rust_abi: 'rust',
- rust_args: [
- '--cfg', 'use_fallback',
- '--cfg', 'feature="syn-error"',
- '--cfg', 'feature="proc-macro"',
- '-A', 'non_fmt_panics'
- ],
- dependencies: [
- proc_macro_error_attr_dep,
- proc_macro2_dep,
- quote_dep,
- syn_dep,
- ],
- native: true,
-)
-
-proc_macro_error_dep = declare_dependency(
- link_with: _proc_macro_error_rs,
-)
-
-meson.override_dependency('proc-macro-error-1-rs', proc_macro_error_dep, native: true)
diff --git a/subprojects/packagefiles/proc-macro-error-attr-1-rs/meson.build b/subprojects/packagefiles/proc-macro-error-attr-1-rs/meson.build
deleted file mode 100644
index d900c54..0000000
--- a/subprojects/packagefiles/proc-macro-error-attr-1-rs/meson.build
+++ /dev/null
@@ -1,32 +0,0 @@
-project('proc-macro-error-attr-1-rs', 'rust',
- version: '1.12.0',
- license: 'MIT OR Apache-2.0',
- default_options: [])
-
-subproject('proc-macro2-1-rs', required: true)
-subproject('quote-1-rs', required: true)
-
-proc_macro2_dep = dependency('proc-macro2-1-rs', native: true)
-quote_dep = dependency('quote-1-rs', native: true)
-
-rust = import('rust')
-_proc_macro_error_attr_rs = rust.proc_macro(
- 'proc_macro_error_attr',
- files('src/lib.rs'),
- override_options: ['rust_std=2018', 'build.rust_std=2018'],
- rust_args: [
- '--cfg', 'use_fallback',
- '--cfg', 'feature="syn-error"',
- '--cfg', 'feature="proc-macro"'
- ],
- dependencies: [
- proc_macro2_dep,
- quote_dep,
- ],
-)
-
-proc_macro_error_attr_dep = declare_dependency(
- link_with: _proc_macro_error_attr_rs,
-)
-
-meson.override_dependency('proc-macro-error-attr-1-rs', proc_macro_error_attr_dep, native: true)
diff --git a/subprojects/packagefiles/unicode-ident-1-rs/meson.build b/subprojects/packagefiles/unicode-ident-1-rs/meson.build
deleted file mode 100644
index 54f2376..0000000
--- a/subprojects/packagefiles/unicode-ident-1-rs/meson.build
+++ /dev/null
@@ -1,20 +0,0 @@
-project('unicode-ident-1-rs', 'rust',
- version: '1.0.12',
- license: '(MIT OR Apache-2.0) AND Unicode-DFS-2016',
- default_options: [])
-
-_unicode_ident_rs = static_library(
- 'unicode_ident',
- files('src/lib.rs'),
- gnu_symbol_visibility: 'hidden',
- override_options: ['rust_std=2021', 'build.rust_std=2021'],
- rust_abi: 'rust',
- dependencies: [],
- native: true,
-)
-
-unicode_ident_dep = declare_dependency(
- link_with: _unicode_ident_rs,
-)
-
-meson.override_dependency('unicode-ident-1-rs', unicode_ident_dep, native: true)
diff --git a/subprojects/proc-macro-error-1-rs.wrap b/subprojects/proc-macro-error-1-rs.wrap
deleted file mode 100644
index b7db03b..0000000
--- a/subprojects/proc-macro-error-1-rs.wrap
+++ /dev/null
@@ -1,7 +0,0 @@
-[wrap-file]
-directory = proc-macro-error-1.0.4
-source_url = https://crates.io/api/v1/crates/proc-macro-error/1.0.4/download
-source_filename = proc-macro-error-1.0.4.tar.gz
-source_hash = da25490ff9892aab3fcf7c36f08cfb902dd3e71ca0f9f9517bea02a73a5ce38c
-#method = cargo
-patch_directory = proc-macro-error-1-rs
diff --git a/subprojects/proc-macro-error-attr-1-rs.wrap b/subprojects/proc-macro-error-attr-1-rs.wrap
deleted file mode 100644
index d13d8a2..0000000
--- a/subprojects/proc-macro-error-attr-1-rs.wrap
+++ /dev/null
@@ -1,7 +0,0 @@
-[wrap-file]
-directory = proc-macro-error-attr-1.0.4
-source_url = https://crates.io/api/v1/crates/proc-macro-error-attr/1.0.4/download
-source_filename = proc-macro-error-attr-1.0.4.tar.gz
-source_hash = a1be40180e52ecc98ad80b184934baf3d0d29f979574e439af5a55274b35f869
-#method = cargo
-patch_directory = proc-macro-error-attr-1-rs
