| #include "qemu-common.h" |
| #include "qemu/iov.h" |
| #include "qemu/sockets.h" |
| #include "block/coroutine.h" |
| #include "migration/migration.h" |
| #include "migration/qemu-file.h" |
| |
| #define IO_BUF_SIZE 32768 |
| #define MAX_IOV_SIZE MIN(IOV_MAX, 64) |
| |
| struct QEMUFile { |
| const QEMUFileOps *ops; |
| void *opaque; |
| |
| int64_t bytes_xfer; |
| int64_t xfer_limit; |
| |
| int64_t pos; /* start of buffer when writing, end of buffer |
| when reading */ |
| int buf_index; |
| int buf_size; /* 0 when writing */ |
| uint8_t buf[IO_BUF_SIZE]; |
| |
| struct iovec iov[MAX_IOV_SIZE]; |
| unsigned int iovcnt; |
| |
| int last_error; |
| }; |
| |
| typedef struct QEMUFileStdio { |
| FILE *stdio_file; |
| QEMUFile *file; |
| } QEMUFileStdio; |
| |
| typedef struct QEMUFileSocket { |
| int fd; |
| QEMUFile *file; |
| } QEMUFileSocket; |
| |
| static ssize_t socket_writev_buffer(void *opaque, struct iovec *iov, int iovcnt, |
| int64_t pos) |
| { |
| QEMUFileSocket *s = opaque; |
| ssize_t len; |
| ssize_t size = iov_size(iov, iovcnt); |
| |
| len = iov_send(s->fd, iov, iovcnt, 0, size); |
| if (len < size) { |
| len = -socket_error(); |
| } |
| return len; |
| } |
| |
| static int socket_get_fd(void *opaque) |
| { |
| QEMUFileSocket *s = opaque; |
| |
| return s->fd; |
| } |
| |
| static int socket_get_buffer(void *opaque, uint8_t *buf, int64_t pos, int size) |
| { |
| QEMUFileSocket *s = opaque; |
| ssize_t len; |
| |
| for (;;) { |
| len = qemu_recv(s->fd, buf, size, 0); |
| if (len != -1) { |
| break; |
| } |
| if (socket_error() == EAGAIN) { |
| yield_until_fd_readable(s->fd); |
| } else if (socket_error() != EINTR) { |
| break; |
| } |
| } |
| |
| if (len == -1) { |
| len = -socket_error(); |
| } |
| return len; |
| } |
| |
| static int socket_close(void *opaque) |
| { |
| QEMUFileSocket *s = opaque; |
| closesocket(s->fd); |
| g_free(s); |
| return 0; |
| } |
| |
| static int stdio_get_fd(void *opaque) |
| { |
| QEMUFileStdio *s = opaque; |
| |
| return fileno(s->stdio_file); |
| } |
| |
| static int stdio_put_buffer(void *opaque, const uint8_t *buf, int64_t pos, |
| int size) |
| { |
| QEMUFileStdio *s = opaque; |
| return fwrite(buf, 1, size, s->stdio_file); |
| } |
| |
| static int stdio_get_buffer(void *opaque, uint8_t *buf, int64_t pos, int size) |
| { |
| QEMUFileStdio *s = opaque; |
| FILE *fp = s->stdio_file; |
| int bytes; |
| |
| for (;;) { |
| clearerr(fp); |
| bytes = fread(buf, 1, size, fp); |
| if (bytes != 0 || !ferror(fp)) { |
| break; |
| } |
| if (errno == EAGAIN) { |
| yield_until_fd_readable(fileno(fp)); |
| } else if (errno != EINTR) { |
| break; |
| } |
| } |
| return bytes; |
| } |
| |
| static int stdio_pclose(void *opaque) |
| { |
| QEMUFileStdio *s = opaque; |
| int ret; |
| ret = pclose(s->stdio_file); |
| if (ret == -1) { |
| ret = -errno; |
| } else if (!WIFEXITED(ret) || WEXITSTATUS(ret) != 0) { |
| /* close succeeded, but non-zero exit code: */ |
| ret = -EIO; /* fake errno value */ |
| } |
| g_free(s); |
| return ret; |
| } |
| |
| static int stdio_fclose(void *opaque) |
| { |
| QEMUFileStdio *s = opaque; |
| int ret = 0; |
| |
| if (s->file->ops->put_buffer || s->file->ops->writev_buffer) { |
| int fd = fileno(s->stdio_file); |
| struct stat st; |
| |
| ret = fstat(fd, &st); |
| if (ret == 0 && S_ISREG(st.st_mode)) { |
| /* |
| * If the file handle is a regular file make sure the |
| * data is flushed to disk before signaling success. |
| */ |
| ret = fsync(fd); |
| if (ret != 0) { |
| ret = -errno; |
| return ret; |
| } |
| } |
| } |
| if (fclose(s->stdio_file) == EOF) { |
| ret = -errno; |
| } |
| g_free(s); |
| return ret; |
| } |
| |
| static const QEMUFileOps stdio_pipe_read_ops = { |
| .get_fd = stdio_get_fd, |
| .get_buffer = stdio_get_buffer, |
| .close = stdio_pclose |
| }; |
| |
| static const QEMUFileOps stdio_pipe_write_ops = { |
| .get_fd = stdio_get_fd, |
| .put_buffer = stdio_put_buffer, |
| .close = stdio_pclose |
| }; |
| |
| QEMUFile *qemu_popen_cmd(const char *command, const char *mode) |
| { |
| FILE *stdio_file; |
| QEMUFileStdio *s; |
| |
| if (mode == NULL || (mode[0] != 'r' && mode[0] != 'w') || mode[1] != 0) { |
| fprintf(stderr, "qemu_popen: Argument validity check failed\n"); |
| return NULL; |
| } |
| |
| stdio_file = popen(command, mode); |
| if (stdio_file == NULL) { |
| return NULL; |
| } |
| |
| s = g_malloc0(sizeof(QEMUFileStdio)); |
| |
| s->stdio_file = stdio_file; |
| |
| if (mode[0] == 'r') { |
| s->file = qemu_fopen_ops(s, &stdio_pipe_read_ops); |
| } else { |
| s->file = qemu_fopen_ops(s, &stdio_pipe_write_ops); |
| } |
| return s->file; |
| } |
| |
| static const QEMUFileOps stdio_file_read_ops = { |
| .get_fd = stdio_get_fd, |
| .get_buffer = stdio_get_buffer, |
| .close = stdio_fclose |
| }; |
| |
| static const QEMUFileOps stdio_file_write_ops = { |
| .get_fd = stdio_get_fd, |
| .put_buffer = stdio_put_buffer, |
| .close = stdio_fclose |
| }; |
| |
| static ssize_t unix_writev_buffer(void *opaque, struct iovec *iov, int iovcnt, |
| int64_t pos) |
| { |
| QEMUFileSocket *s = opaque; |
| ssize_t len, offset; |
| ssize_t size = iov_size(iov, iovcnt); |
| ssize_t total = 0; |
| |
| assert(iovcnt > 0); |
| offset = 0; |
| while (size > 0) { |
| /* Find the next start position; skip all full-sized vector elements */ |
| while (offset >= iov[0].iov_len) { |
| offset -= iov[0].iov_len; |
| iov++, iovcnt--; |
| } |
| |
| /* skip `offset' bytes from the (now) first element, undo it on exit */ |
| assert(iovcnt > 0); |
| iov[0].iov_base += offset; |
| iov[0].iov_len -= offset; |
| |
| do { |
| len = writev(s->fd, iov, iovcnt); |
| } while (len == -1 && errno == EINTR); |
| if (len == -1) { |
| return -errno; |
| } |
| |
| /* Undo the changes above */ |
| iov[0].iov_base -= offset; |
| iov[0].iov_len += offset; |
| |
| /* Prepare for the next iteration */ |
| offset += len; |
| total += len; |
| size -= len; |
| } |
| |
| return total; |
| } |
| |
| static int unix_get_buffer(void *opaque, uint8_t *buf, int64_t pos, int size) |
| { |
| QEMUFileSocket *s = opaque; |
| ssize_t len; |
| |
| for (;;) { |
| len = read(s->fd, buf, size); |
| if (len != -1) { |
| break; |
| } |
| if (errno == EAGAIN) { |
| yield_until_fd_readable(s->fd); |
| } else if (errno != EINTR) { |
| break; |
| } |
| } |
| |
| if (len == -1) { |
| len = -errno; |
| } |
| return len; |
| } |
| |
| static int unix_close(void *opaque) |
| { |
| QEMUFileSocket *s = opaque; |
| close(s->fd); |
| g_free(s); |
| return 0; |
| } |
| |
| static const QEMUFileOps unix_read_ops = { |
| .get_fd = socket_get_fd, |
| .get_buffer = unix_get_buffer, |
| .close = unix_close |
| }; |
| |
| static const QEMUFileOps unix_write_ops = { |
| .get_fd = socket_get_fd, |
| .writev_buffer = unix_writev_buffer, |
| .close = unix_close |
| }; |
| |
| QEMUFile *qemu_fdopen(int fd, const char *mode) |
| { |
| QEMUFileSocket *s; |
| |
| if (mode == NULL || |
| (mode[0] != 'r' && mode[0] != 'w') || |
| mode[1] != 'b' || mode[2] != 0) { |
| fprintf(stderr, "qemu_fdopen: Argument validity check failed\n"); |
| return NULL; |
| } |
| |
| s = g_malloc0(sizeof(QEMUFileSocket)); |
| s->fd = fd; |
| |
| if (mode[0] == 'r') { |
| s->file = qemu_fopen_ops(s, &unix_read_ops); |
| } else { |
| s->file = qemu_fopen_ops(s, &unix_write_ops); |
| } |
| return s->file; |
| } |
| |
| static const QEMUFileOps socket_read_ops = { |
| .get_fd = socket_get_fd, |
| .get_buffer = socket_get_buffer, |
| .close = socket_close |
| }; |
| |
| static const QEMUFileOps socket_write_ops = { |
| .get_fd = socket_get_fd, |
| .writev_buffer = socket_writev_buffer, |
| .close = socket_close |
| }; |
| |
| bool qemu_file_mode_is_not_valid(const char *mode) |
| { |
| if (mode == NULL || |
| (mode[0] != 'r' && mode[0] != 'w') || |
| mode[1] != 'b' || mode[2] != 0) { |
| fprintf(stderr, "qemu_fopen: Argument validity check failed\n"); |
| return true; |
| } |
| |
| return false; |
| } |
| |
| QEMUFile *qemu_fopen_socket(int fd, const char *mode) |
| { |
| QEMUFileSocket *s; |
| |
| if (qemu_file_mode_is_not_valid(mode)) { |
| return NULL; |
| } |
| |
| s = g_malloc0(sizeof(QEMUFileSocket)); |
| s->fd = fd; |
| if (mode[0] == 'w') { |
| qemu_set_block(s->fd); |
| s->file = qemu_fopen_ops(s, &socket_write_ops); |
| } else { |
| s->file = qemu_fopen_ops(s, &socket_read_ops); |
| } |
| return s->file; |
| } |
| |
| QEMUFile *qemu_fopen(const char *filename, const char *mode) |
| { |
| QEMUFileStdio *s; |
| |
| if (qemu_file_mode_is_not_valid(mode)) { |
| return NULL; |
| } |
| |
| s = g_malloc0(sizeof(QEMUFileStdio)); |
| |
| s->stdio_file = fopen(filename, mode); |
| if (!s->stdio_file) { |
| goto fail; |
| } |
| |
| if (mode[0] == 'w') { |
| s->file = qemu_fopen_ops(s, &stdio_file_write_ops); |
| } else { |
| s->file = qemu_fopen_ops(s, &stdio_file_read_ops); |
| } |
| return s->file; |
| fail: |
| g_free(s); |
| return NULL; |
| } |
| |
| QEMUFile *qemu_fopen_ops(void *opaque, const QEMUFileOps *ops) |
| { |
| QEMUFile *f; |
| |
| f = g_malloc0(sizeof(QEMUFile)); |
| |
| f->opaque = opaque; |
| f->ops = ops; |
| return f; |
| } |
| |
| /* |
| * Get last error for stream f |
| * |
| * Return negative error value if there has been an error on previous |
| * operations, return 0 if no error happened. |
| * |
| */ |
| int qemu_file_get_error(QEMUFile *f) |
| { |
| return f->last_error; |
| } |
| |
| void qemu_file_set_error(QEMUFile *f, int ret) |
| { |
| if (f->last_error == 0) { |
| f->last_error = ret; |
| } |
| } |
| |
| static inline bool qemu_file_is_writable(QEMUFile *f) |
| { |
| return f->ops->writev_buffer || f->ops->put_buffer; |
| } |
| |
| /** |
| * Flushes QEMUFile buffer |
| * |
| * If there is writev_buffer QEMUFileOps it uses it otherwise uses |
| * put_buffer ops. |
| */ |
| void qemu_fflush(QEMUFile *f) |
| { |
| ssize_t ret = 0; |
| |
| if (!qemu_file_is_writable(f)) { |
| return; |
| } |
| |
| if (f->ops->writev_buffer) { |
| if (f->iovcnt > 0) { |
| ret = f->ops->writev_buffer(f->opaque, f->iov, f->iovcnt, f->pos); |
| } |
| } else { |
| if (f->buf_index > 0) { |
| ret = f->ops->put_buffer(f->opaque, f->buf, f->pos, f->buf_index); |
| } |
| } |
| if (ret >= 0) { |
| f->pos += ret; |
| } |
| f->buf_index = 0; |
| f->iovcnt = 0; |
| if (ret < 0) { |
| qemu_file_set_error(f, ret); |
| } |
| } |
| |
| void ram_control_before_iterate(QEMUFile *f, uint64_t flags) |
| { |
| int ret = 0; |
| |
| if (f->ops->before_ram_iterate) { |
| ret = f->ops->before_ram_iterate(f, f->opaque, flags); |
| if (ret < 0) { |
| qemu_file_set_error(f, ret); |
| } |
| } |
| } |
| |
| void ram_control_after_iterate(QEMUFile *f, uint64_t flags) |
| { |
| int ret = 0; |
| |
| if (f->ops->after_ram_iterate) { |
| ret = f->ops->after_ram_iterate(f, f->opaque, flags); |
| if (ret < 0) { |
| qemu_file_set_error(f, ret); |
| } |
| } |
| } |
| |
| void ram_control_load_hook(QEMUFile *f, uint64_t flags) |
| { |
| int ret = -EINVAL; |
| |
| if (f->ops->hook_ram_load) { |
| ret = f->ops->hook_ram_load(f, f->opaque, flags); |
| if (ret < 0) { |
| qemu_file_set_error(f, ret); |
| } |
| } else { |
| qemu_file_set_error(f, ret); |
| } |
| } |
| |
| size_t ram_control_save_page(QEMUFile *f, ram_addr_t block_offset, |
| ram_addr_t offset, size_t size, int *bytes_sent) |
| { |
| if (f->ops->save_page) { |
| int ret = f->ops->save_page(f, f->opaque, block_offset, |
| offset, size, bytes_sent); |
| |
| if (ret != RAM_SAVE_CONTROL_DELAYED) { |
| if (bytes_sent && *bytes_sent > 0) { |
| qemu_update_position(f, *bytes_sent); |
| } else if (ret < 0) { |
| qemu_file_set_error(f, ret); |
| } |
| } |
| |
| return ret; |
| } |
| |
| return RAM_SAVE_CONTROL_NOT_SUPP; |
| } |
| |
| static void qemu_fill_buffer(QEMUFile *f) |
| { |
| int len; |
| int pending; |
| |
| assert(!qemu_file_is_writable(f)); |
| |
| pending = f->buf_size - f->buf_index; |
| if (pending > 0) { |
| memmove(f->buf, f->buf + f->buf_index, pending); |
| } |
| f->buf_index = 0; |
| f->buf_size = pending; |
| |
| len = f->ops->get_buffer(f->opaque, f->buf + pending, f->pos, |
| IO_BUF_SIZE - pending); |
| if (len > 0) { |
| f->buf_size += len; |
| f->pos += len; |
| } else if (len == 0) { |
| qemu_file_set_error(f, -EIO); |
| } else if (len != -EAGAIN) { |
| qemu_file_set_error(f, len); |
| } |
| } |
| |
| int qemu_get_fd(QEMUFile *f) |
| { |
| if (f->ops->get_fd) { |
| return f->ops->get_fd(f->opaque); |
| } |
| return -1; |
| } |
| |
| void qemu_update_position(QEMUFile *f, size_t size) |
| { |
| f->pos += size; |
| } |
| |
| /** Closes the file |
| * |
| * Returns negative error value if any error happened on previous operations or |
| * while closing the file. Returns 0 or positive number on success. |
| * |
| * The meaning of return value on success depends on the specific backend |
| * being used. |
| */ |
| int qemu_fclose(QEMUFile *f) |
| { |
| int ret; |
| qemu_fflush(f); |
| ret = qemu_file_get_error(f); |
| |
| if (f->ops->close) { |
| int ret2 = f->ops->close(f->opaque); |
| if (ret >= 0) { |
| ret = ret2; |
| } |
| } |
| /* If any error was spotted before closing, we should report it |
| * instead of the close() return value. |
| */ |
| if (f->last_error) { |
| ret = f->last_error; |
| } |
| g_free(f); |
| return ret; |
| } |
| |
| static void add_to_iovec(QEMUFile *f, const uint8_t *buf, int size) |
| { |
| /* check for adjacent buffer and coalesce them */ |
| if (f->iovcnt > 0 && buf == f->iov[f->iovcnt - 1].iov_base + |
| f->iov[f->iovcnt - 1].iov_len) { |
| f->iov[f->iovcnt - 1].iov_len += size; |
| } else { |
| f->iov[f->iovcnt].iov_base = (uint8_t *)buf; |
| f->iov[f->iovcnt++].iov_len = size; |
| } |
| |
| if (f->iovcnt >= MAX_IOV_SIZE) { |
| qemu_fflush(f); |
| } |
| } |
| |
| void qemu_put_buffer_async(QEMUFile *f, const uint8_t *buf, int size) |
| { |
| if (!f->ops->writev_buffer) { |
| qemu_put_buffer(f, buf, size); |
| return; |
| } |
| |
| if (f->last_error) { |
| return; |
| } |
| |
| f->bytes_xfer += size; |
| add_to_iovec(f, buf, size); |
| } |
| |
| void qemu_put_buffer(QEMUFile *f, const uint8_t *buf, int size) |
| { |
| int l; |
| |
| if (f->last_error) { |
| return; |
| } |
| |
| while (size > 0) { |
| l = IO_BUF_SIZE - f->buf_index; |
| if (l > size) { |
| l = size; |
| } |
| memcpy(f->buf + f->buf_index, buf, l); |
| f->bytes_xfer += l; |
| if (f->ops->writev_buffer) { |
| add_to_iovec(f, f->buf + f->buf_index, l); |
| } |
| f->buf_index += l; |
| if (f->buf_index == IO_BUF_SIZE) { |
| qemu_fflush(f); |
| } |
| if (qemu_file_get_error(f)) { |
| break; |
| } |
| buf += l; |
| size -= l; |
| } |
| } |
| |
| void qemu_put_byte(QEMUFile *f, int v) |
| { |
| if (f->last_error) { |
| return; |
| } |
| |
| f->buf[f->buf_index] = v; |
| f->bytes_xfer++; |
| if (f->ops->writev_buffer) { |
| add_to_iovec(f, f->buf + f->buf_index, 1); |
| } |
| f->buf_index++; |
| if (f->buf_index == IO_BUF_SIZE) { |
| qemu_fflush(f); |
| } |
| } |
| |
| void qemu_file_skip(QEMUFile *f, int size) |
| { |
| if (f->buf_index + size <= f->buf_size) { |
| f->buf_index += size; |
| } |
| } |
| |
| int qemu_peek_buffer(QEMUFile *f, uint8_t *buf, int size, size_t offset) |
| { |
| int pending; |
| int index; |
| |
| assert(!qemu_file_is_writable(f)); |
| |
| index = f->buf_index + offset; |
| pending = f->buf_size - index; |
| if (pending < size) { |
| qemu_fill_buffer(f); |
| index = f->buf_index + offset; |
| pending = f->buf_size - index; |
| } |
| |
| if (pending <= 0) { |
| return 0; |
| } |
| if (size > pending) { |
| size = pending; |
| } |
| |
| memcpy(buf, f->buf + index, size); |
| return size; |
| } |
| |
| int qemu_get_buffer(QEMUFile *f, uint8_t *buf, int size) |
| { |
| int pending = size; |
| int done = 0; |
| |
| while (pending > 0) { |
| int res; |
| |
| res = qemu_peek_buffer(f, buf, pending, 0); |
| if (res == 0) { |
| return done; |
| } |
| qemu_file_skip(f, res); |
| buf += res; |
| pending -= res; |
| done += res; |
| } |
| return done; |
| } |
| |
| int qemu_peek_byte(QEMUFile *f, int offset) |
| { |
| int index = f->buf_index + offset; |
| |
| assert(!qemu_file_is_writable(f)); |
| |
| if (index >= f->buf_size) { |
| qemu_fill_buffer(f); |
| index = f->buf_index + offset; |
| if (index >= f->buf_size) { |
| return 0; |
| } |
| } |
| return f->buf[index]; |
| } |
| |
| int qemu_get_byte(QEMUFile *f) |
| { |
| int result; |
| |
| result = qemu_peek_byte(f, 0); |
| qemu_file_skip(f, 1); |
| return result; |
| } |
| |
| int64_t qemu_ftell(QEMUFile *f) |
| { |
| qemu_fflush(f); |
| return f->pos; |
| } |
| |
| int qemu_file_rate_limit(QEMUFile *f) |
| { |
| if (qemu_file_get_error(f)) { |
| return 1; |
| } |
| if (f->xfer_limit > 0 && f->bytes_xfer > f->xfer_limit) { |
| return 1; |
| } |
| return 0; |
| } |
| |
| int64_t qemu_file_get_rate_limit(QEMUFile *f) |
| { |
| return f->xfer_limit; |
| } |
| |
| void qemu_file_set_rate_limit(QEMUFile *f, int64_t limit) |
| { |
| f->xfer_limit = limit; |
| } |
| |
| void qemu_file_reset_rate_limit(QEMUFile *f) |
| { |
| f->bytes_xfer = 0; |
| } |
| |
| void qemu_put_be16(QEMUFile *f, unsigned int v) |
| { |
| qemu_put_byte(f, v >> 8); |
| qemu_put_byte(f, v); |
| } |
| |
| void qemu_put_be32(QEMUFile *f, unsigned int v) |
| { |
| qemu_put_byte(f, v >> 24); |
| qemu_put_byte(f, v >> 16); |
| qemu_put_byte(f, v >> 8); |
| qemu_put_byte(f, v); |
| } |
| |
| void qemu_put_be64(QEMUFile *f, uint64_t v) |
| { |
| qemu_put_be32(f, v >> 32); |
| qemu_put_be32(f, v); |
| } |
| |
| unsigned int qemu_get_be16(QEMUFile *f) |
| { |
| unsigned int v; |
| v = qemu_get_byte(f) << 8; |
| v |= qemu_get_byte(f); |
| return v; |
| } |
| |
| unsigned int qemu_get_be32(QEMUFile *f) |
| { |
| unsigned int v; |
| v = qemu_get_byte(f) << 24; |
| v |= qemu_get_byte(f) << 16; |
| v |= qemu_get_byte(f) << 8; |
| v |= qemu_get_byte(f); |
| return v; |
| } |
| |
| uint64_t qemu_get_be64(QEMUFile *f) |
| { |
| uint64_t v; |
| v = (uint64_t)qemu_get_be32(f) << 32; |
| v |= qemu_get_be32(f); |
| return v; |
| } |