| /* |
| * QEMU IDE Emulation: PCI Bus support. |
| * |
| * Copyright (c) 2003 Fabrice Bellard |
| * Copyright (c) 2006 Openedhand Ltd. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| #include <hw/hw.h> |
| #include <hw/i386/pc.h> |
| #include <hw/pci/pci.h> |
| #include <hw/isa/isa.h> |
| #include "block/block.h" |
| #include "sysemu/dma.h" |
| |
| #include <hw/ide/pci.h> |
| |
| #define BMDMA_PAGE_SIZE 4096 |
| |
| static void bmdma_start_dma(IDEDMA *dma, IDEState *s, |
| BlockDriverCompletionFunc *dma_cb) |
| { |
| BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma); |
| |
| bm->unit = s->unit; |
| bm->dma_cb = dma_cb; |
| bm->cur_prd_last = 0; |
| bm->cur_prd_addr = 0; |
| bm->cur_prd_len = 0; |
| bm->sector_num = ide_get_sector(s); |
| bm->nsector = s->nsector; |
| |
| if (bm->status & BM_STATUS_DMAING) { |
| bm->dma_cb(bmdma_active_if(bm), 0); |
| } |
| } |
| |
| /* return 0 if buffer completed */ |
| static int bmdma_prepare_buf(IDEDMA *dma, int is_write) |
| { |
| BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma); |
| IDEState *s = bmdma_active_if(bm); |
| struct { |
| uint32_t addr; |
| uint32_t size; |
| } prd; |
| int l, len; |
| |
| pci_dma_sglist_init(&s->sg, &bm->pci_dev->dev, |
| s->nsector / (BMDMA_PAGE_SIZE / 512) + 1); |
| s->io_buffer_size = 0; |
| for(;;) { |
| if (bm->cur_prd_len == 0) { |
| /* end of table (with a fail safe of one page) */ |
| if (bm->cur_prd_last || |
| (bm->cur_addr - bm->addr) >= BMDMA_PAGE_SIZE) |
| return s->io_buffer_size != 0; |
| pci_dma_read(&bm->pci_dev->dev, bm->cur_addr, &prd, 8); |
| bm->cur_addr += 8; |
| prd.addr = le32_to_cpu(prd.addr); |
| prd.size = le32_to_cpu(prd.size); |
| len = prd.size & 0xfffe; |
| if (len == 0) |
| len = 0x10000; |
| bm->cur_prd_len = len; |
| bm->cur_prd_addr = prd.addr; |
| bm->cur_prd_last = (prd.size & 0x80000000); |
| } |
| l = bm->cur_prd_len; |
| if (l > 0) { |
| qemu_sglist_add(&s->sg, bm->cur_prd_addr, l); |
| bm->cur_prd_addr += l; |
| bm->cur_prd_len -= l; |
| s->io_buffer_size += l; |
| } |
| } |
| return 1; |
| } |
| |
| /* return 0 if buffer completed */ |
| static int bmdma_rw_buf(IDEDMA *dma, int is_write) |
| { |
| BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma); |
| IDEState *s = bmdma_active_if(bm); |
| struct { |
| uint32_t addr; |
| uint32_t size; |
| } prd; |
| int l, len; |
| |
| for(;;) { |
| l = s->io_buffer_size - s->io_buffer_index; |
| if (l <= 0) |
| break; |
| if (bm->cur_prd_len == 0) { |
| /* end of table (with a fail safe of one page) */ |
| if (bm->cur_prd_last || |
| (bm->cur_addr - bm->addr) >= BMDMA_PAGE_SIZE) |
| return 0; |
| pci_dma_read(&bm->pci_dev->dev, bm->cur_addr, &prd, 8); |
| bm->cur_addr += 8; |
| prd.addr = le32_to_cpu(prd.addr); |
| prd.size = le32_to_cpu(prd.size); |
| len = prd.size & 0xfffe; |
| if (len == 0) |
| len = 0x10000; |
| bm->cur_prd_len = len; |
| bm->cur_prd_addr = prd.addr; |
| bm->cur_prd_last = (prd.size & 0x80000000); |
| } |
| if (l > bm->cur_prd_len) |
| l = bm->cur_prd_len; |
| if (l > 0) { |
| if (is_write) { |
| pci_dma_write(&bm->pci_dev->dev, bm->cur_prd_addr, |
| s->io_buffer + s->io_buffer_index, l); |
| } else { |
| pci_dma_read(&bm->pci_dev->dev, bm->cur_prd_addr, |
| s->io_buffer + s->io_buffer_index, l); |
| } |
| bm->cur_prd_addr += l; |
| bm->cur_prd_len -= l; |
| s->io_buffer_index += l; |
| } |
| } |
| return 1; |
| } |
| |
| static int bmdma_set_unit(IDEDMA *dma, int unit) |
| { |
| BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma); |
| bm->unit = unit; |
| |
| return 0; |
| } |
| |
| static int bmdma_add_status(IDEDMA *dma, int status) |
| { |
| BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma); |
| bm->status |= status; |
| |
| return 0; |
| } |
| |
| static int bmdma_set_inactive(IDEDMA *dma) |
| { |
| BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma); |
| |
| bm->status &= ~BM_STATUS_DMAING; |
| bm->dma_cb = NULL; |
| bm->unit = -1; |
| |
| return 0; |
| } |
| |
| static void bmdma_restart_dma(BMDMAState *bm, enum ide_dma_cmd dma_cmd) |
| { |
| IDEState *s = bmdma_active_if(bm); |
| |
| ide_set_sector(s, bm->sector_num); |
| s->io_buffer_index = 0; |
| s->io_buffer_size = 0; |
| s->nsector = bm->nsector; |
| s->dma_cmd = dma_cmd; |
| bm->cur_addr = bm->addr; |
| bm->dma_cb = ide_dma_cb; |
| bmdma_start_dma(&bm->dma, s, bm->dma_cb); |
| } |
| |
| /* TODO This should be common IDE code */ |
| static void bmdma_restart_bh(void *opaque) |
| { |
| BMDMAState *bm = opaque; |
| IDEBus *bus = bm->bus; |
| bool is_read; |
| int error_status; |
| |
| qemu_bh_delete(bm->bh); |
| bm->bh = NULL; |
| |
| if (bm->unit == (uint8_t) -1) { |
| return; |
| } |
| |
| is_read = (bus->error_status & BM_STATUS_RETRY_READ) != 0; |
| |
| /* The error status must be cleared before resubmitting the request: The |
| * request may fail again, and this case can only be distinguished if the |
| * called function can set a new error status. */ |
| error_status = bus->error_status; |
| bus->error_status = 0; |
| |
| if (error_status & BM_STATUS_DMA_RETRY) { |
| if (error_status & BM_STATUS_RETRY_TRIM) { |
| bmdma_restart_dma(bm, IDE_DMA_TRIM); |
| } else { |
| bmdma_restart_dma(bm, is_read ? IDE_DMA_READ : IDE_DMA_WRITE); |
| } |
| } else if (error_status & BM_STATUS_PIO_RETRY) { |
| if (is_read) { |
| ide_sector_read(bmdma_active_if(bm)); |
| } else { |
| ide_sector_write(bmdma_active_if(bm)); |
| } |
| } else if (error_status & BM_STATUS_RETRY_FLUSH) { |
| ide_flush_cache(bmdma_active_if(bm)); |
| } |
| } |
| |
| static void bmdma_restart_cb(void *opaque, int running, RunState state) |
| { |
| IDEDMA *dma = opaque; |
| BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma); |
| |
| if (!running) |
| return; |
| |
| if (!bm->bh) { |
| bm->bh = qemu_bh_new(bmdma_restart_bh, &bm->dma); |
| qemu_bh_schedule(bm->bh); |
| } |
| } |
| |
| static void bmdma_cancel(BMDMAState *bm) |
| { |
| if (bm->status & BM_STATUS_DMAING) { |
| /* cancel DMA request */ |
| bmdma_set_inactive(&bm->dma); |
| } |
| } |
| |
| static int bmdma_reset(IDEDMA *dma) |
| { |
| BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma); |
| |
| #ifdef DEBUG_IDE |
| printf("ide: dma_reset\n"); |
| #endif |
| bmdma_cancel(bm); |
| bm->cmd = 0; |
| bm->status = 0; |
| bm->addr = 0; |
| bm->cur_addr = 0; |
| bm->cur_prd_last = 0; |
| bm->cur_prd_addr = 0; |
| bm->cur_prd_len = 0; |
| bm->sector_num = 0; |
| bm->nsector = 0; |
| |
| return 0; |
| } |
| |
| static int bmdma_start_transfer(IDEDMA *dma) |
| { |
| return 0; |
| } |
| |
| static void bmdma_irq(void *opaque, int n, int level) |
| { |
| BMDMAState *bm = opaque; |
| |
| if (!level) { |
| /* pass through lower */ |
| qemu_set_irq(bm->irq, level); |
| return; |
| } |
| |
| bm->status |= BM_STATUS_INT; |
| |
| /* trigger the real irq */ |
| qemu_set_irq(bm->irq, level); |
| } |
| |
| void bmdma_cmd_writeb(BMDMAState *bm, uint32_t val) |
| { |
| #ifdef DEBUG_IDE |
| printf("%s: 0x%08x\n", __func__, val); |
| #endif |
| |
| /* Ignore writes to SSBM if it keeps the old value */ |
| if ((val & BM_CMD_START) != (bm->cmd & BM_CMD_START)) { |
| if (!(val & BM_CMD_START)) { |
| /* |
| * We can't cancel Scatter Gather DMA in the middle of the |
| * operation or a partial (not full) DMA transfer would reach |
| * the storage so we wait for completion instead (we beahve |
| * like if the DMA was completed by the time the guest trying |
| * to cancel dma with bmdma_cmd_writeb with BM_CMD_START not |
| * set). |
| * |
| * In the future we'll be able to safely cancel the I/O if the |
| * whole DMA operation will be submitted to disk with a single |
| * aio operation with preadv/pwritev. |
| */ |
| if (bm->bus->dma->aiocb) { |
| bdrv_drain_all(); |
| assert(bm->bus->dma->aiocb == NULL); |
| } |
| bm->status &= ~BM_STATUS_DMAING; |
| } else { |
| bm->cur_addr = bm->addr; |
| if (!(bm->status & BM_STATUS_DMAING)) { |
| bm->status |= BM_STATUS_DMAING; |
| /* start dma transfer if possible */ |
| if (bm->dma_cb) |
| bm->dma_cb(bmdma_active_if(bm), 0); |
| } |
| } |
| } |
| |
| bm->cmd = val & 0x09; |
| } |
| |
| static uint64_t bmdma_addr_read(void *opaque, hwaddr addr, |
| unsigned width) |
| { |
| BMDMAState *bm = opaque; |
| uint32_t mask = (1ULL << (width * 8)) - 1; |
| uint64_t data; |
| |
| data = (bm->addr >> (addr * 8)) & mask; |
| #ifdef DEBUG_IDE |
| printf("%s: 0x%08x\n", __func__, (unsigned)data); |
| #endif |
| return data; |
| } |
| |
| static void bmdma_addr_write(void *opaque, hwaddr addr, |
| uint64_t data, unsigned width) |
| { |
| BMDMAState *bm = opaque; |
| int shift = addr * 8; |
| uint32_t mask = (1ULL << (width * 8)) - 1; |
| |
| #ifdef DEBUG_IDE |
| printf("%s: 0x%08x\n", __func__, (unsigned)data); |
| #endif |
| bm->addr &= ~(mask << shift); |
| bm->addr |= ((data & mask) << shift) & ~3; |
| } |
| |
| MemoryRegionOps bmdma_addr_ioport_ops = { |
| .read = bmdma_addr_read, |
| .write = bmdma_addr_write, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| }; |
| |
| static bool ide_bmdma_current_needed(void *opaque) |
| { |
| BMDMAState *bm = opaque; |
| |
| return (bm->cur_prd_len != 0); |
| } |
| |
| static bool ide_bmdma_status_needed(void *opaque) |
| { |
| BMDMAState *bm = opaque; |
| |
| /* Older versions abused some bits in the status register for internal |
| * error state. If any of these bits are set, we must add a subsection to |
| * transfer the real status register */ |
| uint8_t abused_bits = BM_MIGRATION_COMPAT_STATUS_BITS; |
| |
| return ((bm->status & abused_bits) != 0); |
| } |
| |
| static void ide_bmdma_pre_save(void *opaque) |
| { |
| BMDMAState *bm = opaque; |
| uint8_t abused_bits = BM_MIGRATION_COMPAT_STATUS_BITS; |
| |
| bm->migration_compat_status = |
| (bm->status & ~abused_bits) | (bm->bus->error_status & abused_bits); |
| } |
| |
| /* This function accesses bm->bus->error_status which is loaded only after |
| * BMDMA itself. This is why the function is called from ide_pci_post_load |
| * instead of being registered with VMState where it would run too early. */ |
| static int ide_bmdma_post_load(void *opaque, int version_id) |
| { |
| BMDMAState *bm = opaque; |
| uint8_t abused_bits = BM_MIGRATION_COMPAT_STATUS_BITS; |
| |
| if (bm->status == 0) { |
| bm->status = bm->migration_compat_status & ~abused_bits; |
| bm->bus->error_status |= bm->migration_compat_status & abused_bits; |
| } |
| |
| return 0; |
| } |
| |
| static const VMStateDescription vmstate_bmdma_current = { |
| .name = "ide bmdma_current", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .minimum_version_id_old = 1, |
| .fields = (VMStateField []) { |
| VMSTATE_UINT32(cur_addr, BMDMAState), |
| VMSTATE_UINT32(cur_prd_last, BMDMAState), |
| VMSTATE_UINT32(cur_prd_addr, BMDMAState), |
| VMSTATE_UINT32(cur_prd_len, BMDMAState), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| const VMStateDescription vmstate_bmdma_status = { |
| .name ="ide bmdma/status", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .minimum_version_id_old = 1, |
| .fields = (VMStateField []) { |
| VMSTATE_UINT8(status, BMDMAState), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static const VMStateDescription vmstate_bmdma = { |
| .name = "ide bmdma", |
| .version_id = 3, |
| .minimum_version_id = 0, |
| .minimum_version_id_old = 0, |
| .pre_save = ide_bmdma_pre_save, |
| .fields = (VMStateField []) { |
| VMSTATE_UINT8(cmd, BMDMAState), |
| VMSTATE_UINT8(migration_compat_status, BMDMAState), |
| VMSTATE_UINT32(addr, BMDMAState), |
| VMSTATE_INT64(sector_num, BMDMAState), |
| VMSTATE_UINT32(nsector, BMDMAState), |
| VMSTATE_UINT8(unit, BMDMAState), |
| VMSTATE_END_OF_LIST() |
| }, |
| .subsections = (VMStateSubsection []) { |
| { |
| .vmsd = &vmstate_bmdma_current, |
| .needed = ide_bmdma_current_needed, |
| }, { |
| .vmsd = &vmstate_bmdma_status, |
| .needed = ide_bmdma_status_needed, |
| }, { |
| /* empty */ |
| } |
| } |
| }; |
| |
| static int ide_pci_post_load(void *opaque, int version_id) |
| { |
| PCIIDEState *d = opaque; |
| int i; |
| |
| for(i = 0; i < 2; i++) { |
| /* current versions always store 0/1, but older version |
| stored bigger values. We only need last bit */ |
| d->bmdma[i].unit &= 1; |
| ide_bmdma_post_load(&d->bmdma[i], -1); |
| } |
| |
| return 0; |
| } |
| |
| const VMStateDescription vmstate_ide_pci = { |
| .name = "ide", |
| .version_id = 3, |
| .minimum_version_id = 0, |
| .minimum_version_id_old = 0, |
| .post_load = ide_pci_post_load, |
| .fields = (VMStateField []) { |
| VMSTATE_PCI_DEVICE(dev, PCIIDEState), |
| VMSTATE_STRUCT_ARRAY(bmdma, PCIIDEState, 2, 0, |
| vmstate_bmdma, BMDMAState), |
| VMSTATE_IDE_BUS_ARRAY(bus, PCIIDEState, 2), |
| VMSTATE_IDE_DRIVES(bus[0].ifs, PCIIDEState), |
| VMSTATE_IDE_DRIVES(bus[1].ifs, PCIIDEState), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| void pci_ide_create_devs(PCIDevice *dev, DriveInfo **hd_table) |
| { |
| PCIIDEState *d = DO_UPCAST(PCIIDEState, dev, dev); |
| static const int bus[4] = { 0, 0, 1, 1 }; |
| static const int unit[4] = { 0, 1, 0, 1 }; |
| int i; |
| |
| for (i = 0; i < 4; i++) { |
| if (hd_table[i] == NULL) |
| continue; |
| ide_create_drive(d->bus+bus[i], unit[i], hd_table[i]); |
| } |
| } |
| |
| static const struct IDEDMAOps bmdma_ops = { |
| .start_dma = bmdma_start_dma, |
| .start_transfer = bmdma_start_transfer, |
| .prepare_buf = bmdma_prepare_buf, |
| .rw_buf = bmdma_rw_buf, |
| .set_unit = bmdma_set_unit, |
| .add_status = bmdma_add_status, |
| .set_inactive = bmdma_set_inactive, |
| .restart_cb = bmdma_restart_cb, |
| .reset = bmdma_reset, |
| }; |
| |
| void bmdma_init(IDEBus *bus, BMDMAState *bm, PCIIDEState *d) |
| { |
| qemu_irq *irq; |
| |
| if (bus->dma == &bm->dma) { |
| return; |
| } |
| |
| bm->dma.ops = &bmdma_ops; |
| bus->dma = &bm->dma; |
| bm->irq = bus->irq; |
| irq = qemu_allocate_irqs(bmdma_irq, bm, 1); |
| bus->irq = *irq; |
| bm->pci_dev = d; |
| } |