#ifndef QEMU_QDEV_PROPERTIES_H
#define QEMU_QDEV_PROPERTIES_H

#include "hw/qdev-core.h"

/*** qdev-properties.c ***/

extern PropertyInfo qdev_prop_bit;
extern PropertyInfo qdev_prop_bool;
extern PropertyInfo qdev_prop_uint8;
extern PropertyInfo qdev_prop_uint16;
extern PropertyInfo qdev_prop_uint32;
extern PropertyInfo qdev_prop_int32;
extern PropertyInfo qdev_prop_uint64;
extern PropertyInfo qdev_prop_hex8;
extern PropertyInfo qdev_prop_hex32;
extern PropertyInfo qdev_prop_hex64;
extern PropertyInfo qdev_prop_size;
extern PropertyInfo qdev_prop_string;
extern PropertyInfo qdev_prop_chr;
extern PropertyInfo qdev_prop_ptr;
extern PropertyInfo qdev_prop_macaddr;
extern PropertyInfo qdev_prop_losttickpolicy;
extern PropertyInfo qdev_prop_bios_chs_trans;
extern PropertyInfo qdev_prop_drive;
extern PropertyInfo qdev_prop_netdev;
extern PropertyInfo qdev_prop_vlan;
extern PropertyInfo qdev_prop_pci_devfn;
extern PropertyInfo qdev_prop_blocksize;
extern PropertyInfo qdev_prop_pci_host_devaddr;
extern PropertyInfo qdev_prop_arraylen;

#define DEFINE_PROP(_name, _state, _field, _prop, _type) { \
        .name      = (_name),                                    \
        .info      = &(_prop),                                   \
        .offset    = offsetof(_state, _field)                    \
            + type_check(_type, typeof_field(_state, _field)),   \
        }
#define DEFINE_PROP_DEFAULT(_name, _state, _field, _defval, _prop, _type) { \
        .name      = (_name),                                           \
        .info      = &(_prop),                                          \
        .offset    = offsetof(_state, _field)                           \
            + type_check(_type,typeof_field(_state, _field)),           \
        .qtype     = QTYPE_QINT,                                        \
        .defval    = (_type)_defval,                                    \
        }
#define DEFINE_PROP_BIT(_name, _state, _field, _bit, _defval) {  \
        .name      = (_name),                                    \
        .info      = &(qdev_prop_bit),                           \
        .bitnr    = (_bit),                                      \
        .offset    = offsetof(_state, _field)                    \
            + type_check(uint32_t,typeof_field(_state, _field)), \
        .qtype     = QTYPE_QBOOL,                                \
        .defval    = (bool)_defval,                              \
        }

#define DEFINE_PROP_BOOL(_name, _state, _field, _defval) {       \
        .name      = (_name),                                    \
        .info      = &(qdev_prop_bool),                          \
        .offset    = offsetof(_state, _field)                    \
            + type_check(bool, typeof_field(_state, _field)),    \
        .qtype     = QTYPE_QBOOL,                                \
        .defval    = (bool)_defval,                              \
        }

#define PROP_ARRAY_LEN_PREFIX "len-"

/**
 * DEFINE_PROP_ARRAY:
 * @_name: name of the array
 * @_state: name of the device state structure type
 * @_field: uint32_t field in @_state to hold the array length
 * @_arrayfield: field in @_state (of type '@_arraytype *') which
 *               will point to the array
 * @_arrayprop: PropertyInfo defining what property the array elements have
 * @_arraytype: C type of the array elements
 *
 * Define device properties for a variable-length array _name.  A
 * static property "len-arrayname" is defined. When the device creator
 * sets this property to the desired length of array, further dynamic
 * properties "arrayname[0]", "arrayname[1]", ...  are defined so the
 * device creator can set the array element values. Setting the
 * "len-arrayname" property more than once is an error.
 *
 * When the array length is set, the @_field member of the device
 * struct is set to the array length, and @_arrayfield is set to point
 * to (zero-initialised) memory allocated for the array.  For a zero
 * length array, @_field will be set to 0 and @_arrayfield to NULL.
 * It is the responsibility of the device deinit code to free the
 * @_arrayfield memory.
 */
#define DEFINE_PROP_ARRAY(_name, _state, _field,                        \
                          _arrayfield, _arrayprop, _arraytype) {        \
        .name = (PROP_ARRAY_LEN_PREFIX _name),                          \
        .info = &(qdev_prop_arraylen),                                  \
        .offset = offsetof(_state, _field)                              \
            + type_check(uint32_t, typeof_field(_state, _field)),       \
        .qtype = QTYPE_QINT,                                            \
        .arrayinfo = &(_arrayprop),                                     \
        .arrayfieldsize = sizeof(_arraytype),                           \
        .arrayoffset = offsetof(_state, _arrayfield),                   \
        }

#define DEFINE_PROP_UINT8(_n, _s, _f, _d)                       \
    DEFINE_PROP_DEFAULT(_n, _s, _f, _d, qdev_prop_uint8, uint8_t)
#define DEFINE_PROP_UINT16(_n, _s, _f, _d)                      \
    DEFINE_PROP_DEFAULT(_n, _s, _f, _d, qdev_prop_uint16, uint16_t)
#define DEFINE_PROP_UINT32(_n, _s, _f, _d)                      \
    DEFINE_PROP_DEFAULT(_n, _s, _f, _d, qdev_prop_uint32, uint32_t)
#define DEFINE_PROP_INT32(_n, _s, _f, _d)                      \
    DEFINE_PROP_DEFAULT(_n, _s, _f, _d, qdev_prop_int32, int32_t)
#define DEFINE_PROP_UINT64(_n, _s, _f, _d)                      \
    DEFINE_PROP_DEFAULT(_n, _s, _f, _d, qdev_prop_uint64, uint64_t)
#define DEFINE_PROP_HEX8(_n, _s, _f, _d)                       \
    DEFINE_PROP_DEFAULT(_n, _s, _f, _d, qdev_prop_hex8, uint8_t)
#define DEFINE_PROP_HEX32(_n, _s, _f, _d)                       \
    DEFINE_PROP_DEFAULT(_n, _s, _f, _d, qdev_prop_hex32, uint32_t)
#define DEFINE_PROP_HEX64(_n, _s, _f, _d)                       \
    DEFINE_PROP_DEFAULT(_n, _s, _f, _d, qdev_prop_hex64, uint64_t)
#define DEFINE_PROP_SIZE(_n, _s, _f, _d)                       \
    DEFINE_PROP_DEFAULT(_n, _s, _f, _d, qdev_prop_size, uint64_t)
#define DEFINE_PROP_PCI_DEVFN(_n, _s, _f, _d)                   \
    DEFINE_PROP_DEFAULT(_n, _s, _f, _d, qdev_prop_pci_devfn, int32_t)

/*
 * Please avoid pointer properties.  If you must use them, you must
 * cover them in their device's class init function as follows:
 *
 * - If the property must be set, the device cannot be used with
 *   device_add, so add code like this:
 *   |* Reason: pointer property "NAME-OF-YOUR-PROP" *|
 *   DeviceClass *dc = DEVICE_CLASS(class);
 *   dc->cannot_instantiate_with_device_add_yet = true;
 *
 * - If the property may safely remain null, document it like this:
 *   |*
 *    * Note: pointer property "interrupt_vector" may remain null, thus
 *    * no need for dc->cannot_instantiate_with_device_add_yet = true;
 *    *|
 */
#define DEFINE_PROP_PTR(_n, _s, _f)             \
    DEFINE_PROP(_n, _s, _f, qdev_prop_ptr, void*)

#define DEFINE_PROP_CHR(_n, _s, _f)             \
    DEFINE_PROP(_n, _s, _f, qdev_prop_chr, CharDriverState*)
#define DEFINE_PROP_STRING(_n, _s, _f)             \
    DEFINE_PROP(_n, _s, _f, qdev_prop_string, char*)
#define DEFINE_PROP_NETDEV(_n, _s, _f)             \
    DEFINE_PROP(_n, _s, _f, qdev_prop_netdev, NICPeers)
#define DEFINE_PROP_VLAN(_n, _s, _f)             \
    DEFINE_PROP(_n, _s, _f, qdev_prop_vlan, NICPeers)
#define DEFINE_PROP_DRIVE(_n, _s, _f) \
    DEFINE_PROP(_n, _s, _f, qdev_prop_drive, BlockDriverState *)
#define DEFINE_PROP_MACADDR(_n, _s, _f)         \
    DEFINE_PROP(_n, _s, _f, qdev_prop_macaddr, MACAddr)
#define DEFINE_PROP_LOSTTICKPOLICY(_n, _s, _f, _d) \
    DEFINE_PROP_DEFAULT(_n, _s, _f, _d, qdev_prop_losttickpolicy, \
                        LostTickPolicy)
#define DEFINE_PROP_BIOS_CHS_TRANS(_n, _s, _f, _d) \
    DEFINE_PROP_DEFAULT(_n, _s, _f, _d, qdev_prop_bios_chs_trans, int)
#define DEFINE_PROP_BLOCKSIZE(_n, _s, _f, _d) \
    DEFINE_PROP_DEFAULT(_n, _s, _f, _d, qdev_prop_blocksize, uint16_t)
#define DEFINE_PROP_PCI_HOST_DEVADDR(_n, _s, _f) \
    DEFINE_PROP(_n, _s, _f, qdev_prop_pci_host_devaddr, PCIHostDeviceAddress)

#define DEFINE_PROP_END_OF_LIST()               \
    {}

/* Set properties between creation and init.  */
void *qdev_get_prop_ptr(DeviceState *dev, Property *prop);
void qdev_prop_parse(DeviceState *dev, const char *name, const char *value,
                     Error **errp);
void qdev_prop_set_bit(DeviceState *dev, const char *name, bool value);
void qdev_prop_set_uint8(DeviceState *dev, const char *name, uint8_t value);
void qdev_prop_set_uint16(DeviceState *dev, const char *name, uint16_t value);
void qdev_prop_set_uint32(DeviceState *dev, const char *name, uint32_t value);
void qdev_prop_set_int32(DeviceState *dev, const char *name, int32_t value);
void qdev_prop_set_uint64(DeviceState *dev, const char *name, uint64_t value);
void qdev_prop_set_string(DeviceState *dev, const char *name, const char *value);
void qdev_prop_set_chr(DeviceState *dev, const char *name, CharDriverState *value);
void qdev_prop_set_netdev(DeviceState *dev, const char *name, NetClientState *value);
int qdev_prop_set_drive(DeviceState *dev, const char *name, BlockDriverState *value) QEMU_WARN_UNUSED_RESULT;
void qdev_prop_set_drive_nofail(DeviceState *dev, const char *name, BlockDriverState *value);
void qdev_prop_set_macaddr(DeviceState *dev, const char *name, uint8_t *value);
void qdev_prop_set_enum(DeviceState *dev, const char *name, int value);
/* FIXME: Remove opaque pointer properties.  */
void qdev_prop_set_ptr(DeviceState *dev, const char *name, void *value);

void qdev_prop_register_global(GlobalProperty *prop);
void qdev_prop_register_global_list(GlobalProperty *props);
void qdev_prop_set_globals(DeviceState *dev, Error **errp);
void qdev_prop_set_globals_for_type(DeviceState *dev, const char *typename,
                                    Error **errp);
void error_set_from_qdev_prop_error(Error **errp, int ret, DeviceState *dev,
                                    Property *prop, const char *value);

/**
 * @qdev_property_add_static - add a @Property to a device referencing a
 * field in a struct.
 */
void qdev_property_add_static(DeviceState *dev, Property *prop, Error **errp);

/**
 * @qdev_prop_set_after_realize:
 * @dev: device
 * @name: name of property
 * @errp: indirect pointer to Error to be set
 * Set the Error object to report that an attempt was made to set a property
 * on a device after it has already been realized. This is a utility function
 * which allows property-setter functions to easily report the error in
 * a friendly format identifying both the device and the property.
 */
void qdev_prop_set_after_realize(DeviceState *dev, const char *name,
                                 Error **errp);
#endif