qerror: restore alphabetical order over qerrors
Over time these must have gotten out of order. Put everything back in
alphabetical order.
This is purely a clean up. In practice nothing depends on the order.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
diff --git a/qerror.c b/qerror.c
index 62c0c70..2979b3e 100644
--- a/qerror.c
+++ b/qerror.c
@@ -44,6 +44,10 @@
*/
static const QErrorStringTable qerror_table[] = {
{
+ .error_fmt = QERR_ADD_CLIENT_FAILED,
+ .desc = "Could not add client",
+ },
+ {
.error_fmt = QERR_BAD_BUS_FOR_DEVICE,
.desc = "Device '%(device)' can't go on a %(bad_bus_type) bus",
},
@@ -52,26 +56,30 @@
.desc = "Block format '%(format)' used by device '%(name)' does not support feature '%(feature)'",
},
{
- .error_fmt = QERR_BUS_NOT_FOUND,
- .desc = "Bus '%(bus)' not found",
- },
- {
.error_fmt = QERR_BUS_NO_HOTPLUG,
.desc = "Bus '%(bus)' does not support hotplugging",
},
{
- .error_fmt = QERR_COMMAND_NOT_FOUND,
- .desc = "The command %(name) has not been found",
+ .error_fmt = QERR_BUS_NOT_FOUND,
+ .desc = "Bus '%(bus)' not found",
},
{
.error_fmt = QERR_COMMAND_DISABLED,
.desc = "The command %(name) has been disabled for this instance",
},
{
+ .error_fmt = QERR_COMMAND_NOT_FOUND,
+ .desc = "The command %(name) has not been found",
+ },
+ {
.error_fmt = QERR_DEVICE_ENCRYPTED,
.desc = "Device '%(device)' is encrypted",
},
{
+ .error_fmt = QERR_DEVICE_FEATURE_BLOCKS_MIGRATION,
+ .desc = "Migration is disabled when using feature '%(feature)' in device '%(device)'",
+ },
+ {
.error_fmt = QERR_DEVICE_INIT_FAILED,
.desc = "Device '%(device)' could not be initialized",
},
@@ -80,10 +88,6 @@
.desc = "Device '%(device)' is in use",
},
{
- .error_fmt = QERR_DEVICE_FEATURE_BLOCKS_MIGRATION,
- .desc = "Migration is disabled when using feature '%(feature)' in device '%(device)'",
- },
- {
.error_fmt = QERR_DEVICE_LOCKED,
.desc = "Device '%(device)' is locked",
},
@@ -92,6 +96,14 @@
.desc = "Device '%(device)' has multiple child busses",
},
{
+ .error_fmt = QERR_DEVICE_NO_BUS,
+ .desc = "Device '%(device)' has no child bus",
+ },
+ {
+ .error_fmt = QERR_DEVICE_NO_HOTPLUG,
+ .desc = "Device '%(device)' does not support hotplugging",
+ },
+ {
.error_fmt = QERR_DEVICE_NOT_ACTIVE,
.desc = "Device '%(device)' has not been activated",
},
@@ -108,14 +120,6 @@
.desc = "Device '%(device)' is not removable",
},
{
- .error_fmt = QERR_DEVICE_NO_BUS,
- .desc = "Device '%(device)' has no child bus",
- },
- {
- .error_fmt = QERR_DEVICE_NO_HOTPLUG,
- .desc = "Device '%(device)' does not support hotplugging",
- },
- {
.error_fmt = QERR_DUPLICATE_ID,
.desc = "Duplicate ID '%(id)' for %(object)",
},
@@ -140,6 +144,10 @@
.desc = "Invalid parameter '%(name)'",
},
{
+ .error_fmt = QERR_INVALID_PARAMETER_COMBINATION,
+ .desc = "Invalid parameter combination",
+ },
+ {
.error_fmt = QERR_INVALID_PARAMETER_TYPE,
.desc = "Invalid parameter type, expected: %(expected)",
},
@@ -156,15 +164,15 @@
.desc = "An IO error has occurred",
},
{
- .error_fmt = QERR_JSON_PARSING,
- .desc = "Invalid JSON syntax",
- },
- {
.error_fmt = QERR_JSON_PARSE_ERROR,
.desc = "JSON parse error, %(message)",
},
{
+ .error_fmt = QERR_JSON_PARSING,
+ .desc = "Invalid JSON syntax",
+ },
+ {
.error_fmt = QERR_KVM_MISSING_CAP,
.desc = "Using KVM without %(capability), %(feature) unavailable",
},
@@ -210,6 +218,14 @@
"value %(value) (minimum: %(min), maximum: %(max)'",
},
{
+ .error_fmt = QERR_QGA_COMMAND_FAILED,
+ .desc = "Guest agent command failed, error was '%(message)'",
+ },
+ {
+ .error_fmt = QERR_QGA_LOGGING_FAILED,
+ .desc = "Guest agent failed to log non-optional log statement",
+ },
+ {
.error_fmt = QERR_QMP_BAD_INPUT_OBJECT,
.desc = "Expected '%(expected)' in QMP input",
},
@@ -230,10 +246,6 @@
.desc = "Could not set password",
},
{
- .error_fmt = QERR_ADD_CLIENT_FAILED,
- .desc = "Could not add client",
- },
- {
.error_fmt = QERR_TOO_MANY_FILES,
.desc = "Too many open files",
},
@@ -242,15 +254,15 @@
.desc = "An undefined error has occurred",
},
{
- .error_fmt = QERR_UNSUPPORTED,
- .desc = "this feature or command is not currently supported",
- },
- {
.error_fmt = QERR_UNKNOWN_BLOCK_FORMAT_FEATURE,
.desc = "'%(device)' uses a %(format) feature which is not "
"supported by this qemu version: %(feature)",
},
{
+ .error_fmt = QERR_UNSUPPORTED,
+ .desc = "this feature or command is not currently supported",
+ },
+ {
.error_fmt = QERR_VIRTFS_FEATURE_BLOCKS_MIGRATION,
.desc = "Migration is disabled when VirtFS export path '%(path)' "
"is mounted in the guest using mount_tag '%(tag)'",
@@ -259,18 +271,6 @@
.error_fmt = QERR_VNC_SERVER_FAILED,
.desc = "Could not start VNC server on %(target)",
},
- {
- .error_fmt = QERR_QGA_LOGGING_FAILED,
- .desc = "Guest agent failed to log non-optional log statement",
- },
- {
- .error_fmt = QERR_QGA_COMMAND_FAILED,
- .desc = "Guest agent command failed, error was '%(message)'",
- },
- {
- .error_fmt = QERR_INVALID_PARAMETER_COMBINATION,
- .desc = "Invalid parameter combination",
- },
{}
};
