tests/acceptance: Test PMON with Loongson-3A1000 CPU
Test booting of PMON bootloader on loongson3-virt platform.
$ (venv) AVOCADO_ALLOW_UNTRUSTED_CODE=1 \
avocado --show=app,console \
run -t machine:loongson3-virt tests/acceptance
Fetching asset from tests/acceptance/machine_mips_loongson3v.py:MipsLoongson3v.test_pmon_serial_console
JOB ID : 8e202b3727847c9104d0d3d6546ed225d35f6706
JOB LOG : /home/flygoat/avocado/job-results/job-2021-01-12T10.02-8e202b3/job.log
(1/1) tests/acceptance/machine_mips_loongson3v.py:MipsLoongson3v.test_pmon_serial_console:
console: PMON2000 MIPS Initializing. Standby...
console: 00000000Jump to 9fc
console: Init Memory done.
console: The uncache data is:
console: 00000000: 5555555555555555
console: 00000008: aaaaaaaaaaaaaaaa
console: 00000010: 3333333333333333
console: 00000018: cccccccccccccccc
console: 00000020: 7777777777777777
console: 00000028: 8888888888888888
console: 00000030: 1111111111111111
console: 00000038: eeeeeeeeeeeeeeee
console: The cached data is:
console: 00000000: 5555555555555555
console: 00000008: aaaaaaaaaaaaaaaa
console: 00000010: 3333333333333333
console: 00000018: cccccccccccccccc
console: 00000020: 7777777777777777
console: 00000028: 8888888888888888
console: 00000030: 1111111111111111
console: 00000038: eeeeeeeeeeeeeeee
console: Copy PMON to execute location...
console: start = 0x8f900000
console: s0 = 0x30300000
console: _edata = 0x8f989010
console: _end = 0x8f98a028copy text section done.
console: Copy PMON to execute location done.
console: sp=8f8fc000
console: Uncompressing Bios............................................................................OK,Booting Bios
console: FREQ
console: DONE
console: DEVI
console: ENVI
console: MAPV
console: NVRAM@8f7ff898
console: STDV
console: 80100000: memory between 8f7ff400-8f800000 is already been allocated,heap is already above this point
console: SBDD
console: P12PCIH
console: PCIH
console: PCID
console: setting up 1 bus
console: PCI bus 0 slot 1: probe...completed
console: PCI bus 0 slot 1/0: vendor/product: 0x106b/0x003f (serialbus, USB, interface: 0x10, revision: 0x00)
console: PCI bus 0 slot 1/0: reg 0x10 = 0xffffff00
console: PCI bus 0 slot 2: probe...completed
console: PCI bus 0 slot 2/0: vendor/product: 0x1af4/0x1000 (network, ethernet, interface: 0x00, revision: 0x00)
console: PCI bus 0 slot 2/0: reg 0x10 = 0xffffffe1
console: PCI bus 0 slot 2/0: reg 0x14 = 0xfffff000
console: PCI bus 0 slot 2/0: reg 0x20 = 0xffffc00c
console: PCI bus 0 slot 2/0: reg 0x30 = 0xfffc0000
console: PCI bus 0 slot 3: probe...completed
console: PCI bus 0 slot 4: probe...completed
console: PCI bus 0 slot 5: probe...completed
console: PCI bus 0 slot 6: probe...completed
console: PCI bus 0 slot 7: probe...completed
console: PCI bus 0 slot 8: probe...completed
console: PCI bus 0 slot 9: probe...completed
console: PCI bus 0 slot 10: probe...completed
console: PCI bus 0 slot 11: probe...completed
console: PCI bus 0 slot 12: probe...completed
console: PCI bus 0 slot 13: probe...completed
console: PCI bus 0 slot 14: probe...completed
console: PCI bus 0 slot 15: probe...completed
console: PCI bus 0 slot 16: probe...completed
console: PCI bus 0 slot 17: probe...completed
console: PCI bus 0 slot 18: probe...completed
console: PCI bus 0 slot 19: probe...completed
console: PCI bus 0 slot 20: probe...completed
console: PCI bus 0 slot 21: probe...completed
console: PCI bus 0 slot 22: probe...completed
console: PCI bus 0 slot 23: probe...completed
console: PCI bus 0 slot 24: probe...completed
console: PCI bus 0 slot 25: probe...completed
console: PCI bus 0 slot 26: probe...completed
console: PCI bus 0 slot 27: probe...completed
console: PCI bus 0 slot 28: probe...completed
console: PCI bus 0 slot 29: probe...completed
console: PCI bus 0 slot 30: probe...completed
console: PCI bus 0 slot 31: probe...completed
console: PCIS
console: PCIR
console: PCIW
console: PCI bus 0 slot 2/0: mem @0x40000000, reg 0x30 262144 bytes
console: PCI bus 0 slot 2/0: mem @0x40040000, reg 0x20 16384 bytes
console: PCI bus 0 slot 2/0: mem @0x40044000, reg 0x14 4096 bytes
console: PCI bus 0 slot 1/0: mem @0x40045000, reg 0x10 256 bytes
console: PCI bus 0 slot 2/0: exp @0x40000000, 262144 bytes
console: PCI bus 0 slot 2/0: i/o @0x00004000, reg 0x10 32 bytes
console: NETI
console: RTCL
console: PCID
console: VGAI
console: memorysize=c000000,base=8f6ff508,sysMem=8f6ef500
console: in setup_int_vect!done!VESA
console: vga bios init failed, rc=-1
console: in configure
console: mainbus0 (root)
console: localbus0 at mainbus0
console: loopdev0 at mainbus0pcibr0 at mainbus0
console: pci0 at pcibr0 bus 0
console: ohci0 at pci0 dev 1 function 0 vendor/product: 0x106b/0x003f (serialbus, USB, interface: 0x10, revision: 0x00)usb base addr : 0xc0045000, bus_base is : 0xc0000000
console: OHCI revision: 0x00000010
console: RH: a: 0x00000203 b: 0x00000000
console: early period(0x0)
console: OHCI 8c01ec00 initialized ok
console: New Device 0
console: usb_get_descriptor
console: bLength = 12
console: bDescriptorType =1
console: bcdUSB = 110
console: bDeviceClass =9
console: bDeviceSubClass =0
console: bDeviceProtocol =0
console: bMaxPacketSize0 =8
console: set address 1
console: usb_get_descriptor
console: bLength = 12
console: bDescriptorType =1
console: bcdUSB = 110
console: bDeviceClass =9
console: bDeviceSubClass =0
console: bDeviceProtocol =0
console: bMaxPacketSize0 =8
console: idVendor =0
console: idProduct =0
console: bcdDevice =0
console: iManufacturer=0
console: iProduct =1
console: iSerialNumber=0
console: bNumConfigurations=1
console: usb_get_descriptor
console: usb_get_descriptor
console: get_conf_no 0 Result 25, wLength 25
console: if 0, ep 0
console: bLength=9
console: bDescriptorType=2
console: wTotalLength=19
console: bNumInterfaces=1
console: bConfigurationValue=1
console: iConfiguration=0
console: bmAttributes=40
console: MaxPower=0
console: 09 04 00 00 01 09 00 00 00 07 05 81 03 02 00 ff
console: ##EP epmaxpacketin[1] = 2
console: set configuration 1
console: new device strings: Mfr=0, Product=1, SerialNumber=0
console: USB device number 1 default language ID 0x409
console: Manufacturer
console: Product OHCI Root Hub
console: SerialNumber
console: New Device 1
console: usb_get_descriptor
console: bLength = 12
console: bDescriptorType =1
console: bcdUSB = 200
console: bDeviceClass =0
console: bDeviceSubClass =0
console: bDeviceProtocol =0
console: bMaxPacketSize0 =8
console: set address 2
console: usb_get_descriptor
console: bLength = 12
console: bDescriptorType =1
console: bcdUSB = 200
console: bDeviceClass =0
console: bDeviceSubClass =0
console: bDeviceProtocol =0
console: bMaxPacketSize0 =8
console: idVendor =627
console: idProduct =1
console: bcdDevice =0
console: iManufacturer=1
console: iProduct =4
console: iSerialNumber=b
console: bNumConfigurations=1
console: usb_get_descriptor
console: usb_get_descriptor
console: get_conf_no 0 Result 34, wLength 34
console: unknown Description Type : 21
console: 09 21 11 01 00 01 22 3F 00
console: if 0, ep 0
console: bLength=9
console: bDescriptorType=2
console: wTotalLength=22
console: bNumInterfaces=1
console: bConfigurationValue=1
console: iConfiguration=8
console: bmAttributes=a0
console: MaxPower=32
console: 09 04 00 00 01 03 01 01 00 09 21 11 01 00 01 22 3f 00 07 05 81 03 08 00 0a
console: ##EP epmaxpacketin[1] = 8
console: set configuration 1
console: new device strings: Mfr=1, Product=4, SerialNumber=11
console: USB device number 2 default language ID 0x409
console: Manufacturer QEMU
console: Product QEMU USB Keyboard
console: SerialNumber 68284-0000:00:01.0-1
console: drive at ohci0 devnum 2, Product QEMU USB Keyboard
console: not configured
console: New Device 2
console: usb_get_descriptor
console: bLength = 12
console: bDescriptorType =1
console: bcdUSB = 200
console: bDeviceClass =0
console: bDeviceSubClass =0
console: bDeviceProtocol =0
console: bMaxPacketSize0 =8
console: set address 3
console: usb_get_descriptor
console: bLength = 12
console: bDescriptorType =1
console: bcdUSB = 200
console: bDeviceClass =0
console: bDeviceSubClass =0
console: bDeviceProtocol =0
console: bMaxPacketSize0 =8
console: idVendor =627
console: idProduct =1
console: bcdDevice =0
console: iManufacturer=1
console: iProduct =3
console: iSerialNumber=a
console: bNumConfigurations=1
console: usb_get_descriptor
console: usb_get_descriptor
console: get_conf_no 0 Result 34, wLength 34
console: unknown Description Type : 21
console: 09 21 01 00 00 01 22 4A 00
console: if 0, ep 0
console: bLength=9
console: bDescriptorType=2
console: wTotalLength=22
console: bNumInterfaces=1
console: bConfigurationValue=1
console: iConfiguration=7
console: bmAttributes=a0
console: MaxPower=32
console: 09 04 00 00 01 03 00 00 00 09 21 01 00 00 01 22 4a 00 07 05 81 03 08 00 0a
console: ##EP epmaxpacketin[1] = 8
console: set configuration 1
console: new device strings: Mfr=1, Product=3, SerialNumber=10
console: USB device number 3 default language ID 0x409
console: Manufacturer QEMU
console: Product QEMU USB Tablet
console: SerialNumber 28754-0000:00:01.0-2
console: drive at ohci0 devnum 3, Product QEMU USB Tablet
console: not configured
console: drive at ohci0 devnum 1, Product OHCI Root Hub
console: not configured
console: vendor/product: 0x1af4/0x1000 (network, ethernet, interface: 0x00, revision: 0x00) at pci0 dev 2 function 0 not configured
console: out configure
console: Press <Del> to set BIOS,waiting for 3 seconds here.....
console: devconfig done.
console: ifinit done.
console: domaininit done.
console: init_proc....
console: HSTI
console: SYMI
console: SBDE
console: [[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[
console: [[ [[[[[[[[[ [[[[[ [[[[ [[[[[ [[[[[ [[[[[ [[[[[ [[[[ [[[[[ [[
console: [[ [[[[[[[[ [[[[ [[[ [[[[ [[[ [[[[ [[[[ [[[[ [[[ [[[[ [[[ [[[[ [[[ [[[[ [[
console: [[ [[[[[[[[ [[[[[[ [[[ [[[[[[ [[[ [ [[[ [[[ [[[[[[[[[[[[ [[[[[[[ [[[[[[ [[[ [ [[[ [[
console: [[ [[[[[[[[ [[[[[[ [[[ [[[[[[ [[[ [[ [[ [[[ [[[ [[[[[[[ [[[[ [[[[[[ [[[ [[ [[ [[
console: [[ [[[[[[[[ [[[[[[ [[[ [[[[[[ [[[ [[[ [ [[[ [[[[[ [[[[[[[[[[ [[[ [[[[[[ [[[ [[[ [ [[
console: [[ [[[[[[[[ [[[[ [[[ [[[[ [[[ [[[[ [[[ [[[[ [[[ [[[ [[[[ [[[[ [[[ [[[[ [[
console: [[ [[[[ [[[[[ [[[[ [[[[[ [[[[ [[[[[ [[[[[[ [[[[ [[[[[ [[
console: [[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[2011 Loongson][[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[
console: Configuration [Bonito,EL,NET,SCSI,IDE]
console: Version: PMON2000 3.3 (Bonito) #0: Tue Dec 22 01:58:09 UTC 2020 commit b3ece66234adbf7d4e453f0ba4f326c099ac2a76 Author: Jiaxun Yang <jiaxun.yang@flygoat.com> Date: Tue Dec 22 09:51:10 2020 +0800 .
console: Supported loaders [txt, srec, elf, bin]
console: Supported filesystems [net, fat, fs, disk, iso9660, socket, tty, ram]
console: This software may be redistributed under the BSD copyright.
console: Copyright 2000-2002, Opsycon AB, Sweden.
console: Copyright 2005, ICT CAS.
console: CPU GODSON3 BogoMIPS: 1327
PASS (3.89 s)
RESULTS : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
JOB TIME : 4.38 s
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210112020708.62922-1-jiaxun.yang@flygoat.com>
[PMD: Set timeout to 60sec, simply test for ''CPU GODSON3 BogoMIPS']
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
diff --git a/MAINTAINERS b/MAINTAINERS
index 5eeba79..ac411c2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1183,6 +1183,7 @@
F: hw/mips/loongson3_bootp.c
F: hw/mips/loongson3_bootp.h
F: hw/mips/loongson3_virt.c
+F: tests/acceptance/machine_mips_loongson3v.py
Boston
M: Paul Burton <paulburton@kernel.org>
