| /* |
| * QEMU IDE disk and CD/DVD-ROM Emulator |
| * |
| * Copyright (c) 2003 Fabrice Bellard |
| * Copyright (c) 2006 Openedhand Ltd. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| #include <hw/hw.h> |
| #include <hw/pc.h> |
| #include <hw/pci.h> |
| #include <hw/scsi-disk.h> |
| #include <hw/sh.h> |
| #include "block.h" |
| #include "block_int.h" |
| #include "qemu-timer.h" |
| #include "sysemu.h" |
| #include "dma.h" |
| |
| #include <hw/ide/internal.h> |
| |
| static int smart_attributes[][5] = { |
| /* id, flags, val, wrst, thrsh */ |
| { 0x01, 0x03, 0x64, 0x64, 0x06}, /* raw read */ |
| { 0x03, 0x03, 0x64, 0x64, 0x46}, /* spin up */ |
| { 0x04, 0x02, 0x64, 0x64, 0x14}, /* start stop count */ |
| { 0x05, 0x03, 0x64, 0x64, 0x36}, /* remapped sectors */ |
| { 0x00, 0x00, 0x00, 0x00, 0x00} |
| }; |
| |
| /* XXX: DVDs that could fit on a CD will be reported as a CD */ |
| static inline int media_present(IDEState *s) |
| { |
| return (s->nb_sectors > 0); |
| } |
| |
| static inline int media_is_dvd(IDEState *s) |
| { |
| return (media_present(s) && s->nb_sectors > CD_MAX_SECTORS); |
| } |
| |
| static inline int media_is_cd(IDEState *s) |
| { |
| return (media_present(s) && s->nb_sectors <= CD_MAX_SECTORS); |
| } |
| |
| static void ide_dma_start(IDEState *s, BlockDriverCompletionFunc *dma_cb); |
| static void ide_dma_restart(IDEState *s); |
| static void ide_atapi_cmd_read_dma_cb(void *opaque, int ret); |
| |
| static void padstr(char *str, const char *src, int len) |
| { |
| int i, v; |
| for(i = 0; i < len; i++) { |
| if (*src) |
| v = *src++; |
| else |
| v = ' '; |
| str[i^1] = v; |
| } |
| } |
| |
| static void padstr8(uint8_t *buf, int buf_size, const char *src) |
| { |
| int i; |
| for(i = 0; i < buf_size; i++) { |
| if (*src) |
| buf[i] = *src++; |
| else |
| buf[i] = ' '; |
| } |
| } |
| |
| static void put_le16(uint16_t *p, unsigned int v) |
| { |
| *p = cpu_to_le16(v); |
| } |
| |
| static void ide_identify(IDEState *s) |
| { |
| uint16_t *p; |
| unsigned int oldsize; |
| |
| if (s->identify_set) { |
| memcpy(s->io_buffer, s->identify_data, sizeof(s->identify_data)); |
| return; |
| } |
| |
| memset(s->io_buffer, 0, 512); |
| p = (uint16_t *)s->io_buffer; |
| put_le16(p + 0, 0x0040); |
| put_le16(p + 1, s->cylinders); |
| put_le16(p + 3, s->heads); |
| put_le16(p + 4, 512 * s->sectors); /* XXX: retired, remove ? */ |
| put_le16(p + 5, 512); /* XXX: retired, remove ? */ |
| put_le16(p + 6, s->sectors); |
| padstr((char *)(p + 10), s->drive_serial_str, 20); /* serial number */ |
| put_le16(p + 20, 3); /* XXX: retired, remove ? */ |
| put_le16(p + 21, 512); /* cache size in sectors */ |
| put_le16(p + 22, 4); /* ecc bytes */ |
| padstr((char *)(p + 23), QEMU_VERSION, 8); /* firmware version */ |
| padstr((char *)(p + 27), "QEMU HARDDISK", 40); /* model */ |
| #if MAX_MULT_SECTORS > 1 |
| put_le16(p + 47, 0x8000 | MAX_MULT_SECTORS); |
| #endif |
| put_le16(p + 48, 1); /* dword I/O */ |
| put_le16(p + 49, (1 << 11) | (1 << 9) | (1 << 8)); /* DMA and LBA supported */ |
| put_le16(p + 51, 0x200); /* PIO transfer cycle */ |
| put_le16(p + 52, 0x200); /* DMA transfer cycle */ |
| put_le16(p + 53, 1 | (1 << 1) | (1 << 2)); /* words 54-58,64-70,88 are valid */ |
| put_le16(p + 54, s->cylinders); |
| put_le16(p + 55, s->heads); |
| put_le16(p + 56, s->sectors); |
| oldsize = s->cylinders * s->heads * s->sectors; |
| put_le16(p + 57, oldsize); |
| put_le16(p + 58, oldsize >> 16); |
| if (s->mult_sectors) |
| put_le16(p + 59, 0x100 | s->mult_sectors); |
| put_le16(p + 60, s->nb_sectors); |
| put_le16(p + 61, s->nb_sectors >> 16); |
| put_le16(p + 62, 0x07); /* single word dma0-2 supported */ |
| put_le16(p + 63, 0x07); /* mdma0-2 supported */ |
| put_le16(p + 65, 120); |
| put_le16(p + 66, 120); |
| put_le16(p + 67, 120); |
| put_le16(p + 68, 120); |
| put_le16(p + 80, 0xf0); /* ata3 -> ata6 supported */ |
| put_le16(p + 81, 0x16); /* conforms to ata5 */ |
| /* 14=NOP supported, 0=SMART supported */ |
| put_le16(p + 82, (1 << 14) | 1); |
| /* 13=flush_cache_ext,12=flush_cache,10=lba48 */ |
| put_le16(p + 83, (1 << 14) | (1 << 13) | (1 <<12) | (1 << 10)); |
| /* 14=set to 1, 1=SMART self test, 0=SMART error logging */ |
| put_le16(p + 84, (1 << 14) | 0); |
| /* 14 = NOP supported, 5=WCACHE enabled, 0=SMART feature set enabled */ |
| if (bdrv_enable_write_cache(s->bs)) |
| put_le16(p + 85, (1 << 14) | (1 << 5) | 1); |
| else |
| put_le16(p + 85, (1 << 14) | 1); |
| /* 13=flush_cache_ext,12=flush_cache,10=lba48 */ |
| put_le16(p + 86, (1 << 14) | (1 << 13) | (1 <<12) | (1 << 10)); |
| /* 14=set to 1, 1=smart self test, 0=smart error logging */ |
| put_le16(p + 87, (1 << 14) | 0); |
| put_le16(p + 88, 0x3f | (1 << 13)); /* udma5 set and supported */ |
| put_le16(p + 93, 1 | (1 << 14) | 0x2000); |
| put_le16(p + 100, s->nb_sectors); |
| put_le16(p + 101, s->nb_sectors >> 16); |
| put_le16(p + 102, s->nb_sectors >> 32); |
| put_le16(p + 103, s->nb_sectors >> 48); |
| |
| memcpy(s->identify_data, p, sizeof(s->identify_data)); |
| s->identify_set = 1; |
| } |
| |
| static void ide_atapi_identify(IDEState *s) |
| { |
| uint16_t *p; |
| |
| if (s->identify_set) { |
| memcpy(s->io_buffer, s->identify_data, sizeof(s->identify_data)); |
| return; |
| } |
| |
| memset(s->io_buffer, 0, 512); |
| p = (uint16_t *)s->io_buffer; |
| /* Removable CDROM, 50us response, 12 byte packets */ |
| put_le16(p + 0, (2 << 14) | (5 << 8) | (1 << 7) | (2 << 5) | (0 << 0)); |
| padstr((char *)(p + 10), s->drive_serial_str, 20); /* serial number */ |
| put_le16(p + 20, 3); /* buffer type */ |
| put_le16(p + 21, 512); /* cache size in sectors */ |
| put_le16(p + 22, 4); /* ecc bytes */ |
| padstr((char *)(p + 23), QEMU_VERSION, 8); /* firmware version */ |
| padstr((char *)(p + 27), "QEMU DVD-ROM", 40); /* model */ |
| put_le16(p + 48, 1); /* dword I/O (XXX: should not be set on CDROM) */ |
| #ifdef USE_DMA_CDROM |
| put_le16(p + 49, 1 << 9 | 1 << 8); /* DMA and LBA supported */ |
| put_le16(p + 53, 7); /* words 64-70, 54-58, 88 valid */ |
| put_le16(p + 62, 7); /* single word dma0-2 supported */ |
| put_le16(p + 63, 7); /* mdma0-2 supported */ |
| put_le16(p + 64, 0x3f); /* PIO modes supported */ |
| #else |
| put_le16(p + 49, 1 << 9); /* LBA supported, no DMA */ |
| put_le16(p + 53, 3); /* words 64-70, 54-58 valid */ |
| put_le16(p + 63, 0x103); /* DMA modes XXX: may be incorrect */ |
| put_le16(p + 64, 1); /* PIO modes */ |
| #endif |
| put_le16(p + 65, 0xb4); /* minimum DMA multiword tx cycle time */ |
| put_le16(p + 66, 0xb4); /* recommended DMA multiword tx cycle time */ |
| put_le16(p + 67, 0x12c); /* minimum PIO cycle time without flow control */ |
| put_le16(p + 68, 0xb4); /* minimum PIO cycle time with IORDY flow control */ |
| |
| put_le16(p + 71, 30); /* in ns */ |
| put_le16(p + 72, 30); /* in ns */ |
| |
| put_le16(p + 80, 0x1e); /* support up to ATA/ATAPI-4 */ |
| #ifdef USE_DMA_CDROM |
| put_le16(p + 88, 0x3f | (1 << 13)); /* udma5 set and supported */ |
| #endif |
| memcpy(s->identify_data, p, sizeof(s->identify_data)); |
| s->identify_set = 1; |
| } |
| |
| static void ide_cfata_identify(IDEState *s) |
| { |
| uint16_t *p; |
| uint32_t cur_sec; |
| |
| p = (uint16_t *) s->identify_data; |
| if (s->identify_set) |
| goto fill_buffer; |
| |
| memset(p, 0, sizeof(s->identify_data)); |
| |
| cur_sec = s->cylinders * s->heads * s->sectors; |
| |
| put_le16(p + 0, 0x848a); /* CF Storage Card signature */ |
| put_le16(p + 1, s->cylinders); /* Default cylinders */ |
| put_le16(p + 3, s->heads); /* Default heads */ |
| put_le16(p + 6, s->sectors); /* Default sectors per track */ |
| put_le16(p + 7, s->nb_sectors >> 16); /* Sectors per card */ |
| put_le16(p + 8, s->nb_sectors); /* Sectors per card */ |
| padstr((char *)(p + 10), s->drive_serial_str, 20); /* serial number */ |
| put_le16(p + 22, 0x0004); /* ECC bytes */ |
| padstr((char *) (p + 23), QEMU_VERSION, 8); /* Firmware Revision */ |
| padstr((char *) (p + 27), "QEMU MICRODRIVE", 40);/* Model number */ |
| #if MAX_MULT_SECTORS > 1 |
| put_le16(p + 47, 0x8000 | MAX_MULT_SECTORS); |
| #else |
| put_le16(p + 47, 0x0000); |
| #endif |
| put_le16(p + 49, 0x0f00); /* Capabilities */ |
| put_le16(p + 51, 0x0002); /* PIO cycle timing mode */ |
| put_le16(p + 52, 0x0001); /* DMA cycle timing mode */ |
| put_le16(p + 53, 0x0003); /* Translation params valid */ |
| put_le16(p + 54, s->cylinders); /* Current cylinders */ |
| put_le16(p + 55, s->heads); /* Current heads */ |
| put_le16(p + 56, s->sectors); /* Current sectors */ |
| put_le16(p + 57, cur_sec); /* Current capacity */ |
| put_le16(p + 58, cur_sec >> 16); /* Current capacity */ |
| if (s->mult_sectors) /* Multiple sector setting */ |
| put_le16(p + 59, 0x100 | s->mult_sectors); |
| put_le16(p + 60, s->nb_sectors); /* Total LBA sectors */ |
| put_le16(p + 61, s->nb_sectors >> 16); /* Total LBA sectors */ |
| put_le16(p + 63, 0x0203); /* Multiword DMA capability */ |
| put_le16(p + 64, 0x0001); /* Flow Control PIO support */ |
| put_le16(p + 65, 0x0096); /* Min. Multiword DMA cycle */ |
| put_le16(p + 66, 0x0096); /* Rec. Multiword DMA cycle */ |
| put_le16(p + 68, 0x00b4); /* Min. PIO cycle time */ |
| put_le16(p + 82, 0x400c); /* Command Set supported */ |
| put_le16(p + 83, 0x7068); /* Command Set supported */ |
| put_le16(p + 84, 0x4000); /* Features supported */ |
| put_le16(p + 85, 0x000c); /* Command Set enabled */ |
| put_le16(p + 86, 0x7044); /* Command Set enabled */ |
| put_le16(p + 87, 0x4000); /* Features enabled */ |
| put_le16(p + 91, 0x4060); /* Current APM level */ |
| put_le16(p + 129, 0x0002); /* Current features option */ |
| put_le16(p + 130, 0x0005); /* Reassigned sectors */ |
| put_le16(p + 131, 0x0001); /* Initial power mode */ |
| put_le16(p + 132, 0x0000); /* User signature */ |
| put_le16(p + 160, 0x8100); /* Power requirement */ |
| put_le16(p + 161, 0x8001); /* CF command set */ |
| |
| s->identify_set = 1; |
| |
| fill_buffer: |
| memcpy(s->io_buffer, p, sizeof(s->identify_data)); |
| } |
| |
| static void ide_set_signature(IDEState *s) |
| { |
| s->select &= 0xf0; /* clear head */ |
| /* put signature */ |
| s->nsector = 1; |
| s->sector = 1; |
| if (s->is_cdrom) { |
| s->lcyl = 0x14; |
| s->hcyl = 0xeb; |
| } else if (s->bs) { |
| s->lcyl = 0; |
| s->hcyl = 0; |
| } else { |
| s->lcyl = 0xff; |
| s->hcyl = 0xff; |
| } |
| } |
| |
| static inline void ide_abort_command(IDEState *s) |
| { |
| s->status = READY_STAT | ERR_STAT; |
| s->error = ABRT_ERR; |
| } |
| |
| static inline void ide_dma_submit_check(IDEState *s, |
| BlockDriverCompletionFunc *dma_cb, BMDMAState *bm) |
| { |
| if (bm->aiocb) |
| return; |
| dma_cb(bm, -1); |
| } |
| |
| /* prepare data transfer and tell what to do after */ |
| static void ide_transfer_start(IDEState *s, uint8_t *buf, int size, |
| EndTransferFunc *end_transfer_func) |
| { |
| s->end_transfer_func = end_transfer_func; |
| s->data_ptr = buf; |
| s->data_end = buf + size; |
| if (!(s->status & ERR_STAT)) |
| s->status |= DRQ_STAT; |
| } |
| |
| static void ide_transfer_stop(IDEState *s) |
| { |
| s->end_transfer_func = ide_transfer_stop; |
| s->data_ptr = s->io_buffer; |
| s->data_end = s->io_buffer; |
| s->status &= ~DRQ_STAT; |
| } |
| |
| int64_t ide_get_sector(IDEState *s) |
| { |
| int64_t sector_num; |
| if (s->select & 0x40) { |
| /* lba */ |
| if (!s->lba48) { |
| sector_num = ((s->select & 0x0f) << 24) | (s->hcyl << 16) | |
| (s->lcyl << 8) | s->sector; |
| } else { |
| sector_num = ((int64_t)s->hob_hcyl << 40) | |
| ((int64_t) s->hob_lcyl << 32) | |
| ((int64_t) s->hob_sector << 24) | |
| ((int64_t) s->hcyl << 16) | |
| ((int64_t) s->lcyl << 8) | s->sector; |
| } |
| } else { |
| sector_num = ((s->hcyl << 8) | s->lcyl) * s->heads * s->sectors + |
| (s->select & 0x0f) * s->sectors + (s->sector - 1); |
| } |
| return sector_num; |
| } |
| |
| void ide_set_sector(IDEState *s, int64_t sector_num) |
| { |
| unsigned int cyl, r; |
| if (s->select & 0x40) { |
| if (!s->lba48) { |
| s->select = (s->select & 0xf0) | (sector_num >> 24); |
| s->hcyl = (sector_num >> 16); |
| s->lcyl = (sector_num >> 8); |
| s->sector = (sector_num); |
| } else { |
| s->sector = sector_num; |
| s->lcyl = sector_num >> 8; |
| s->hcyl = sector_num >> 16; |
| s->hob_sector = sector_num >> 24; |
| s->hob_lcyl = sector_num >> 32; |
| s->hob_hcyl = sector_num >> 40; |
| } |
| } else { |
| cyl = sector_num / (s->heads * s->sectors); |
| r = sector_num % (s->heads * s->sectors); |
| s->hcyl = cyl >> 8; |
| s->lcyl = cyl; |
| s->select = (s->select & 0xf0) | ((r / s->sectors) & 0x0f); |
| s->sector = (r % s->sectors) + 1; |
| } |
| } |
| |
| static void ide_rw_error(IDEState *s) { |
| ide_abort_command(s); |
| ide_set_irq(s->bus); |
| } |
| |
| static void ide_sector_read(IDEState *s) |
| { |
| int64_t sector_num; |
| int ret, n; |
| |
| s->status = READY_STAT | SEEK_STAT; |
| s->error = 0; /* not needed by IDE spec, but needed by Windows */ |
| sector_num = ide_get_sector(s); |
| n = s->nsector; |
| if (n == 0) { |
| /* no more sector to read from disk */ |
| ide_transfer_stop(s); |
| } else { |
| #if defined(DEBUG_IDE) |
| printf("read sector=%" PRId64 "\n", sector_num); |
| #endif |
| if (n > s->req_nb_sectors) |
| n = s->req_nb_sectors; |
| ret = bdrv_read(s->bs, sector_num, s->io_buffer, n); |
| if (ret != 0) { |
| ide_rw_error(s); |
| return; |
| } |
| ide_transfer_start(s, s->io_buffer, 512 * n, ide_sector_read); |
| ide_set_irq(s->bus); |
| ide_set_sector(s, sector_num + n); |
| s->nsector -= n; |
| } |
| } |
| |
| |
| /* return 0 if buffer completed */ |
| static int dma_buf_prepare(BMDMAState *bm, int is_write) |
| { |
| IDEState *s = bmdma_active_if(bm); |
| struct { |
| uint32_t addr; |
| uint32_t size; |
| } prd; |
| int l, len; |
| |
| qemu_sglist_init(&s->sg, s->nsector / (TARGET_PAGE_SIZE/512) + 1); |
| s->io_buffer_size = 0; |
| for(;;) { |
| if (bm->cur_prd_len == 0) { |
| /* end of table (with a fail safe of one page) */ |
| if (bm->cur_prd_last || |
| (bm->cur_addr - bm->addr) >= 4096) |
| return s->io_buffer_size != 0; |
| cpu_physical_memory_read(bm->cur_addr, (uint8_t *)&prd, 8); |
| bm->cur_addr += 8; |
| prd.addr = le32_to_cpu(prd.addr); |
| prd.size = le32_to_cpu(prd.size); |
| len = prd.size & 0xfffe; |
| if (len == 0) |
| len = 0x10000; |
| bm->cur_prd_len = len; |
| bm->cur_prd_addr = prd.addr; |
| bm->cur_prd_last = (prd.size & 0x80000000); |
| } |
| l = bm->cur_prd_len; |
| if (l > 0) { |
| qemu_sglist_add(&s->sg, bm->cur_prd_addr, l); |
| bm->cur_prd_addr += l; |
| bm->cur_prd_len -= l; |
| s->io_buffer_size += l; |
| } |
| } |
| return 1; |
| } |
| |
| static void dma_buf_commit(IDEState *s, int is_write) |
| { |
| qemu_sglist_destroy(&s->sg); |
| } |
| |
| void ide_dma_error(IDEState *s) |
| { |
| ide_transfer_stop(s); |
| s->error = ABRT_ERR; |
| s->status = READY_STAT | ERR_STAT; |
| ide_set_irq(s->bus); |
| } |
| |
| static int ide_handle_write_error(IDEState *s, int error, int op) |
| { |
| BlockInterfaceErrorAction action = drive_get_onerror(s->bs); |
| |
| if (action == BLOCK_ERR_IGNORE) |
| return 0; |
| |
| if ((error == ENOSPC && action == BLOCK_ERR_STOP_ENOSPC) |
| || action == BLOCK_ERR_STOP_ANY) { |
| s->bus->bmdma->unit = s->unit; |
| s->bus->bmdma->status |= op; |
| vm_stop(0); |
| } else { |
| if (op == BM_STATUS_DMA_RETRY) { |
| dma_buf_commit(s, 0); |
| ide_dma_error(s); |
| } else { |
| ide_rw_error(s); |
| } |
| } |
| |
| return 1; |
| } |
| |
| /* return 0 if buffer completed */ |
| static int dma_buf_rw(BMDMAState *bm, int is_write) |
| { |
| IDEState *s = bmdma_active_if(bm); |
| struct { |
| uint32_t addr; |
| uint32_t size; |
| } prd; |
| int l, len; |
| |
| for(;;) { |
| l = s->io_buffer_size - s->io_buffer_index; |
| if (l <= 0) |
| break; |
| if (bm->cur_prd_len == 0) { |
| /* end of table (with a fail safe of one page) */ |
| if (bm->cur_prd_last || |
| (bm->cur_addr - bm->addr) >= 4096) |
| return 0; |
| cpu_physical_memory_read(bm->cur_addr, (uint8_t *)&prd, 8); |
| bm->cur_addr += 8; |
| prd.addr = le32_to_cpu(prd.addr); |
| prd.size = le32_to_cpu(prd.size); |
| len = prd.size & 0xfffe; |
| if (len == 0) |
| len = 0x10000; |
| bm->cur_prd_len = len; |
| bm->cur_prd_addr = prd.addr; |
| bm->cur_prd_last = (prd.size & 0x80000000); |
| } |
| if (l > bm->cur_prd_len) |
| l = bm->cur_prd_len; |
| if (l > 0) { |
| if (is_write) { |
| cpu_physical_memory_write(bm->cur_prd_addr, |
| s->io_buffer + s->io_buffer_index, l); |
| } else { |
| cpu_physical_memory_read(bm->cur_prd_addr, |
| s->io_buffer + s->io_buffer_index, l); |
| } |
| bm->cur_prd_addr += l; |
| bm->cur_prd_len -= l; |
| s->io_buffer_index += l; |
| } |
| } |
| return 1; |
| } |
| |
| static void ide_read_dma_cb(void *opaque, int ret) |
| { |
| BMDMAState *bm = opaque; |
| IDEState *s = bmdma_active_if(bm); |
| int n; |
| int64_t sector_num; |
| |
| if (ret < 0) { |
| dma_buf_commit(s, 1); |
| ide_dma_error(s); |
| return; |
| } |
| |
| n = s->io_buffer_size >> 9; |
| sector_num = ide_get_sector(s); |
| if (n > 0) { |
| dma_buf_commit(s, 1); |
| sector_num += n; |
| ide_set_sector(s, sector_num); |
| s->nsector -= n; |
| } |
| |
| /* end of transfer ? */ |
| if (s->nsector == 0) { |
| s->status = READY_STAT | SEEK_STAT; |
| ide_set_irq(s->bus); |
| eot: |
| bm->status &= ~BM_STATUS_DMAING; |
| bm->status |= BM_STATUS_INT; |
| bm->dma_cb = NULL; |
| bm->unit = -1; |
| bm->aiocb = NULL; |
| return; |
| } |
| |
| /* launch next transfer */ |
| n = s->nsector; |
| s->io_buffer_index = 0; |
| s->io_buffer_size = n * 512; |
| if (dma_buf_prepare(bm, 1) == 0) |
| goto eot; |
| #ifdef DEBUG_AIO |
| printf("aio_read: sector_num=%" PRId64 " n=%d\n", sector_num, n); |
| #endif |
| bm->aiocb = dma_bdrv_read(s->bs, &s->sg, sector_num, ide_read_dma_cb, bm); |
| ide_dma_submit_check(s, ide_read_dma_cb, bm); |
| } |
| |
| static void ide_sector_read_dma(IDEState *s) |
| { |
| s->status = READY_STAT | SEEK_STAT | DRQ_STAT | BUSY_STAT; |
| s->io_buffer_index = 0; |
| s->io_buffer_size = 0; |
| s->is_read = 1; |
| ide_dma_start(s, ide_read_dma_cb); |
| } |
| |
| static void ide_sector_write_timer_cb(void *opaque) |
| { |
| IDEState *s = opaque; |
| ide_set_irq(s->bus); |
| } |
| |
| static void ide_sector_write(IDEState *s) |
| { |
| int64_t sector_num; |
| int ret, n, n1; |
| |
| s->status = READY_STAT | SEEK_STAT; |
| sector_num = ide_get_sector(s); |
| #if defined(DEBUG_IDE) |
| printf("write sector=%" PRId64 "\n", sector_num); |
| #endif |
| n = s->nsector; |
| if (n > s->req_nb_sectors) |
| n = s->req_nb_sectors; |
| ret = bdrv_write(s->bs, sector_num, s->io_buffer, n); |
| |
| if (ret != 0) { |
| if (ide_handle_write_error(s, -ret, BM_STATUS_PIO_RETRY)) |
| return; |
| } |
| |
| s->nsector -= n; |
| if (s->nsector == 0) { |
| /* no more sectors to write */ |
| ide_transfer_stop(s); |
| } else { |
| n1 = s->nsector; |
| if (n1 > s->req_nb_sectors) |
| n1 = s->req_nb_sectors; |
| ide_transfer_start(s, s->io_buffer, 512 * n1, ide_sector_write); |
| } |
| ide_set_sector(s, sector_num + n); |
| |
| #ifdef TARGET_I386 |
| if (win2k_install_hack && ((++s->irq_count % 16) == 0)) { |
| /* It seems there is a bug in the Windows 2000 installer HDD |
| IDE driver which fills the disk with empty logs when the |
| IDE write IRQ comes too early. This hack tries to correct |
| that at the expense of slower write performances. Use this |
| option _only_ to install Windows 2000. You must disable it |
| for normal use. */ |
| qemu_mod_timer(s->sector_write_timer, |
| qemu_get_clock(vm_clock) + (get_ticks_per_sec() / 1000)); |
| } else |
| #endif |
| { |
| ide_set_irq(s->bus); |
| } |
| } |
| |
| static void ide_dma_restart_bh(void *opaque) |
| { |
| BMDMAState *bm = opaque; |
| |
| qemu_bh_delete(bm->bh); |
| bm->bh = NULL; |
| |
| if (bm->status & BM_STATUS_DMA_RETRY) { |
| bm->status &= ~BM_STATUS_DMA_RETRY; |
| ide_dma_restart(bmdma_active_if(bm)); |
| } else if (bm->status & BM_STATUS_PIO_RETRY) { |
| bm->status &= ~BM_STATUS_PIO_RETRY; |
| ide_sector_write(bmdma_active_if(bm)); |
| } |
| } |
| |
| void ide_dma_restart_cb(void *opaque, int running, int reason) |
| { |
| BMDMAState *bm = opaque; |
| |
| if (!running) |
| return; |
| |
| if (!bm->bh) { |
| bm->bh = qemu_bh_new(ide_dma_restart_bh, bm); |
| qemu_bh_schedule(bm->bh); |
| } |
| } |
| |
| static void ide_write_dma_cb(void *opaque, int ret) |
| { |
| BMDMAState *bm = opaque; |
| IDEState *s = bmdma_active_if(bm); |
| int n; |
| int64_t sector_num; |
| |
| if (ret < 0) { |
| if (ide_handle_write_error(s, -ret, BM_STATUS_DMA_RETRY)) |
| return; |
| } |
| |
| n = s->io_buffer_size >> 9; |
| sector_num = ide_get_sector(s); |
| if (n > 0) { |
| dma_buf_commit(s, 0); |
| sector_num += n; |
| ide_set_sector(s, sector_num); |
| s->nsector -= n; |
| } |
| |
| /* end of transfer ? */ |
| if (s->nsector == 0) { |
| s->status = READY_STAT | SEEK_STAT; |
| ide_set_irq(s->bus); |
| eot: |
| bm->status &= ~BM_STATUS_DMAING; |
| bm->status |= BM_STATUS_INT; |
| bm->dma_cb = NULL; |
| bm->unit = -1; |
| bm->aiocb = NULL; |
| return; |
| } |
| |
| n = s->nsector; |
| s->io_buffer_size = n * 512; |
| /* launch next transfer */ |
| if (dma_buf_prepare(bm, 0) == 0) |
| goto eot; |
| #ifdef DEBUG_AIO |
| printf("aio_write: sector_num=%" PRId64 " n=%d\n", sector_num, n); |
| #endif |
| bm->aiocb = dma_bdrv_write(s->bs, &s->sg, sector_num, ide_write_dma_cb, bm); |
| ide_dma_submit_check(s, ide_write_dma_cb, bm); |
| } |
| |
| static void ide_sector_write_dma(IDEState *s) |
| { |
| s->status = READY_STAT | SEEK_STAT | DRQ_STAT | BUSY_STAT; |
| s->io_buffer_index = 0; |
| s->io_buffer_size = 0; |
| s->is_read = 0; |
| ide_dma_start(s, ide_write_dma_cb); |
| } |
| |
| void ide_atapi_cmd_ok(IDEState *s) |
| { |
| s->error = 0; |
| s->status = READY_STAT | SEEK_STAT; |
| s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD; |
| ide_set_irq(s->bus); |
| } |
| |
| void ide_atapi_cmd_error(IDEState *s, int sense_key, int asc) |
| { |
| #ifdef DEBUG_IDE_ATAPI |
| printf("atapi_cmd_error: sense=0x%x asc=0x%x\n", sense_key, asc); |
| #endif |
| s->error = sense_key << 4; |
| s->status = READY_STAT | ERR_STAT; |
| s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD; |
| s->sense_key = sense_key; |
| s->asc = asc; |
| ide_set_irq(s->bus); |
| } |
| |
| static void ide_atapi_cmd_check_status(IDEState *s) |
| { |
| #ifdef DEBUG_IDE_ATAPI |
| printf("atapi_cmd_check_status\n"); |
| #endif |
| s->error = MC_ERR | (SENSE_UNIT_ATTENTION << 4); |
| s->status = ERR_STAT; |
| s->nsector = 0; |
| ide_set_irq(s->bus); |
| } |
| |
| static void ide_flush_cb(void *opaque, int ret) |
| { |
| IDEState *s = opaque; |
| |
| /* XXX: how do we signal I/O errors here? */ |
| |
| s->status = READY_STAT | SEEK_STAT; |
| ide_set_irq(s->bus); |
| } |
| |
| static inline void cpu_to_ube16(uint8_t *buf, int val) |
| { |
| buf[0] = val >> 8; |
| buf[1] = val & 0xff; |
| } |
| |
| static inline void cpu_to_ube32(uint8_t *buf, unsigned int val) |
| { |
| buf[0] = val >> 24; |
| buf[1] = val >> 16; |
| buf[2] = val >> 8; |
| buf[3] = val & 0xff; |
| } |
| |
| static inline int ube16_to_cpu(const uint8_t *buf) |
| { |
| return (buf[0] << 8) | buf[1]; |
| } |
| |
| static inline int ube32_to_cpu(const uint8_t *buf) |
| { |
| return (buf[0] << 24) | (buf[1] << 16) | (buf[2] << 8) | buf[3]; |
| } |
| |
| static void lba_to_msf(uint8_t *buf, int lba) |
| { |
| lba += 150; |
| buf[0] = (lba / 75) / 60; |
| buf[1] = (lba / 75) % 60; |
| buf[2] = lba % 75; |
| } |
| |
| static void cd_data_to_raw(uint8_t *buf, int lba) |
| { |
| /* sync bytes */ |
| buf[0] = 0x00; |
| memset(buf + 1, 0xff, 10); |
| buf[11] = 0x00; |
| buf += 12; |
| /* MSF */ |
| lba_to_msf(buf, lba); |
| buf[3] = 0x01; /* mode 1 data */ |
| buf += 4; |
| /* data */ |
| buf += 2048; |
| /* XXX: ECC not computed */ |
| memset(buf, 0, 288); |
| } |
| |
| static int cd_read_sector(BlockDriverState *bs, int lba, uint8_t *buf, |
| int sector_size) |
| { |
| int ret; |
| |
| switch(sector_size) { |
| case 2048: |
| ret = bdrv_read(bs, (int64_t)lba << 2, buf, 4); |
| break; |
| case 2352: |
| ret = bdrv_read(bs, (int64_t)lba << 2, buf + 16, 4); |
| if (ret < 0) |
| return ret; |
| cd_data_to_raw(buf, lba); |
| break; |
| default: |
| ret = -EIO; |
| break; |
| } |
| return ret; |
| } |
| |
| void ide_atapi_io_error(IDEState *s, int ret) |
| { |
| /* XXX: handle more errors */ |
| if (ret == -ENOMEDIUM) { |
| ide_atapi_cmd_error(s, SENSE_NOT_READY, |
| ASC_MEDIUM_NOT_PRESENT); |
| } else { |
| ide_atapi_cmd_error(s, SENSE_ILLEGAL_REQUEST, |
| ASC_LOGICAL_BLOCK_OOR); |
| } |
| } |
| |
| /* The whole ATAPI transfer logic is handled in this function */ |
| static void ide_atapi_cmd_reply_end(IDEState *s) |
| { |
| int byte_count_limit, size, ret; |
| #ifdef DEBUG_IDE_ATAPI |
| printf("reply: tx_size=%d elem_tx_size=%d index=%d\n", |
| s->packet_transfer_size, |
| s->elementary_transfer_size, |
| s->io_buffer_index); |
| #endif |
| if (s->packet_transfer_size <= 0) { |
| /* end of transfer */ |
| ide_transfer_stop(s); |
| s->status = READY_STAT | SEEK_STAT; |
| s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD; |
| ide_set_irq(s->bus); |
| #ifdef DEBUG_IDE_ATAPI |
| printf("status=0x%x\n", s->status); |
| #endif |
| } else { |
| /* see if a new sector must be read */ |
| if (s->lba != -1 && s->io_buffer_index >= s->cd_sector_size) { |
| ret = cd_read_sector(s->bs, s->lba, s->io_buffer, s->cd_sector_size); |
| if (ret < 0) { |
| ide_transfer_stop(s); |
| ide_atapi_io_error(s, ret); |
| return; |
| } |
| s->lba++; |
| s->io_buffer_index = 0; |
| } |
| if (s->elementary_transfer_size > 0) { |
| /* there are some data left to transmit in this elementary |
| transfer */ |
| size = s->cd_sector_size - s->io_buffer_index; |
| if (size > s->elementary_transfer_size) |
| size = s->elementary_transfer_size; |
| ide_transfer_start(s, s->io_buffer + s->io_buffer_index, |
| size, ide_atapi_cmd_reply_end); |
| s->packet_transfer_size -= size; |
| s->elementary_transfer_size -= size; |
| s->io_buffer_index += size; |
| } else { |
| /* a new transfer is needed */ |
| s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO; |
| byte_count_limit = s->lcyl | (s->hcyl << 8); |
| #ifdef DEBUG_IDE_ATAPI |
| printf("byte_count_limit=%d\n", byte_count_limit); |
| #endif |
| if (byte_count_limit == 0xffff) |
| byte_count_limit--; |
| size = s->packet_transfer_size; |
| if (size > byte_count_limit) { |
| /* byte count limit must be even if this case */ |
| if (byte_count_limit & 1) |
| byte_count_limit--; |
| size = byte_count_limit; |
| } |
| s->lcyl = size; |
| s->hcyl = size >> 8; |
| s->elementary_transfer_size = size; |
| /* we cannot transmit more than one sector at a time */ |
| if (s->lba != -1) { |
| if (size > (s->cd_sector_size - s->io_buffer_index)) |
| size = (s->cd_sector_size - s->io_buffer_index); |
| } |
| ide_transfer_start(s, s->io_buffer + s->io_buffer_index, |
| size, ide_atapi_cmd_reply_end); |
| s->packet_transfer_size -= size; |
| s->elementary_transfer_size -= size; |
| s->io_buffer_index += size; |
| ide_set_irq(s->bus); |
| #ifdef DEBUG_IDE_ATAPI |
| printf("status=0x%x\n", s->status); |
| #endif |
| } |
| } |
| } |
| |
| /* send a reply of 'size' bytes in s->io_buffer to an ATAPI command */ |
| static void ide_atapi_cmd_reply(IDEState *s, int size, int max_size) |
| { |
| if (size > max_size) |
| size = max_size; |
| s->lba = -1; /* no sector read */ |
| s->packet_transfer_size = size; |
| s->io_buffer_size = size; /* dma: send the reply data as one chunk */ |
| s->elementary_transfer_size = 0; |
| s->io_buffer_index = 0; |
| |
| if (s->atapi_dma) { |
| s->status = READY_STAT | SEEK_STAT | DRQ_STAT; |
| ide_dma_start(s, ide_atapi_cmd_read_dma_cb); |
| } else { |
| s->status = READY_STAT | SEEK_STAT; |
| ide_atapi_cmd_reply_end(s); |
| } |
| } |
| |
| /* start a CD-CDROM read command */ |
| static void ide_atapi_cmd_read_pio(IDEState *s, int lba, int nb_sectors, |
| int sector_size) |
| { |
| s->lba = lba; |
| s->packet_transfer_size = nb_sectors * sector_size; |
| s->elementary_transfer_size = 0; |
| s->io_buffer_index = sector_size; |
| s->cd_sector_size = sector_size; |
| |
| s->status = READY_STAT | SEEK_STAT; |
| ide_atapi_cmd_reply_end(s); |
| } |
| |
| /* ATAPI DMA support */ |
| |
| /* XXX: handle read errors */ |
| static void ide_atapi_cmd_read_dma_cb(void *opaque, int ret) |
| { |
| BMDMAState *bm = opaque; |
| IDEState *s = bmdma_active_if(bm); |
| int data_offset, n; |
| |
| if (ret < 0) { |
| ide_atapi_io_error(s, ret); |
| goto eot; |
| } |
| |
| if (s->io_buffer_size > 0) { |
| /* |
| * For a cdrom read sector command (s->lba != -1), |
| * adjust the lba for the next s->io_buffer_size chunk |
| * and dma the current chunk. |
| * For a command != read (s->lba == -1), just transfer |
| * the reply data. |
| */ |
| if (s->lba != -1) { |
| if (s->cd_sector_size == 2352) { |
| n = 1; |
| cd_data_to_raw(s->io_buffer, s->lba); |
| } else { |
| n = s->io_buffer_size >> 11; |
| } |
| s->lba += n; |
| } |
| s->packet_transfer_size -= s->io_buffer_size; |
| if (dma_buf_rw(bm, 1) == 0) |
| goto eot; |
| } |
| |
| if (s->packet_transfer_size <= 0) { |
| s->status = READY_STAT | SEEK_STAT; |
| s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD; |
| ide_set_irq(s->bus); |
| eot: |
| bm->status &= ~BM_STATUS_DMAING; |
| bm->status |= BM_STATUS_INT; |
| bm->dma_cb = NULL; |
| bm->unit = -1; |
| bm->aiocb = NULL; |
| return; |
| } |
| |
| s->io_buffer_index = 0; |
| if (s->cd_sector_size == 2352) { |
| n = 1; |
| s->io_buffer_size = s->cd_sector_size; |
| data_offset = 16; |
| } else { |
| n = s->packet_transfer_size >> 11; |
| if (n > (IDE_DMA_BUF_SECTORS / 4)) |
| n = (IDE_DMA_BUF_SECTORS / 4); |
| s->io_buffer_size = n * 2048; |
| data_offset = 0; |
| } |
| #ifdef DEBUG_AIO |
| printf("aio_read_cd: lba=%u n=%d\n", s->lba, n); |
| #endif |
| bm->iov.iov_base = (void *)(s->io_buffer + data_offset); |
| bm->iov.iov_len = n * 4 * 512; |
| qemu_iovec_init_external(&bm->qiov, &bm->iov, 1); |
| bm->aiocb = bdrv_aio_readv(s->bs, (int64_t)s->lba << 2, &bm->qiov, |
| n * 4, ide_atapi_cmd_read_dma_cb, bm); |
| if (!bm->aiocb) { |
| /* Note: media not present is the most likely case */ |
| ide_atapi_cmd_error(s, SENSE_NOT_READY, |
| ASC_MEDIUM_NOT_PRESENT); |
| goto eot; |
| } |
| } |
| |
| /* start a CD-CDROM read command with DMA */ |
| /* XXX: test if DMA is available */ |
| static void ide_atapi_cmd_read_dma(IDEState *s, int lba, int nb_sectors, |
| int sector_size) |
| { |
| s->lba = lba; |
| s->packet_transfer_size = nb_sectors * sector_size; |
| s->io_buffer_index = 0; |
| s->io_buffer_size = 0; |
| s->cd_sector_size = sector_size; |
| |
| /* XXX: check if BUSY_STAT should be set */ |
| s->status = READY_STAT | SEEK_STAT | DRQ_STAT | BUSY_STAT; |
| ide_dma_start(s, ide_atapi_cmd_read_dma_cb); |
| } |
| |
| static void ide_atapi_cmd_read(IDEState *s, int lba, int nb_sectors, |
| int sector_size) |
| { |
| #ifdef DEBUG_IDE_ATAPI |
| printf("read %s: LBA=%d nb_sectors=%d\n", s->atapi_dma ? "dma" : "pio", |
| lba, nb_sectors); |
| #endif |
| if (s->atapi_dma) { |
| ide_atapi_cmd_read_dma(s, lba, nb_sectors, sector_size); |
| } else { |
| ide_atapi_cmd_read_pio(s, lba, nb_sectors, sector_size); |
| } |
| } |
| |
| static inline uint8_t ide_atapi_set_profile(uint8_t *buf, uint8_t *index, |
| uint16_t profile) |
| { |
| uint8_t *buf_profile = buf + 12; /* start of profiles */ |
| |
| buf_profile += ((*index) * 4); /* start of indexed profile */ |
| cpu_to_ube16 (buf_profile, profile); |
| buf_profile[2] = ((buf_profile[0] == buf[6]) && (buf_profile[1] == buf[7])); |
| |
| /* each profile adds 4 bytes to the response */ |
| (*index)++; |
| buf[11] += 4; /* Additional Length */ |
| |
| return 4; |
| } |
| |
| static int ide_dvd_read_structure(IDEState *s, int format, |
| const uint8_t *packet, uint8_t *buf) |
| { |
| switch (format) { |
| case 0x0: /* Physical format information */ |
| { |
| int layer = packet[6]; |
| uint64_t total_sectors; |
| |
| if (layer != 0) |
| return -ASC_INV_FIELD_IN_CMD_PACKET; |
| |
| bdrv_get_geometry(s->bs, &total_sectors); |
| total_sectors >>= 2; |
| if (total_sectors == 0) |
| return -ASC_MEDIUM_NOT_PRESENT; |
| |
| buf[4] = 1; /* DVD-ROM, part version 1 */ |
| buf[5] = 0xf; /* 120mm disc, minimum rate unspecified */ |
| buf[6] = 1; /* one layer, read-only (per MMC-2 spec) */ |
| buf[7] = 0; /* default densities */ |
| |
| /* FIXME: 0x30000 per spec? */ |
| cpu_to_ube32(buf + 8, 0); /* start sector */ |
| cpu_to_ube32(buf + 12, total_sectors - 1); /* end sector */ |
| cpu_to_ube32(buf + 16, total_sectors - 1); /* l0 end sector */ |
| |
| /* Size of buffer, not including 2 byte size field */ |
| cpu_to_be16wu((uint16_t *)buf, 2048 + 2); |
| |
| /* 2k data + 4 byte header */ |
| return (2048 + 4); |
| } |
| |
| case 0x01: /* DVD copyright information */ |
| buf[4] = 0; /* no copyright data */ |
| buf[5] = 0; /* no region restrictions */ |
| |
| /* Size of buffer, not including 2 byte size field */ |
| cpu_to_be16wu((uint16_t *)buf, 4 + 2); |
| |
| /* 4 byte header + 4 byte data */ |
| return (4 + 4); |
| |
| case 0x03: /* BCA information - invalid field for no BCA info */ |
| return -ASC_INV_FIELD_IN_CMD_PACKET; |
| |
| case 0x04: /* DVD disc manufacturing information */ |
| /* Size of buffer, not including 2 byte size field */ |
| cpu_to_be16wu((uint16_t *)buf, 2048 + 2); |
| |
| /* 2k data + 4 byte header */ |
| return (2048 + 4); |
| |
| case 0xff: |
| /* |
| * This lists all the command capabilities above. Add new ones |
| * in order and update the length and buffer return values. |
| */ |
| |
| buf[4] = 0x00; /* Physical format */ |
| buf[5] = 0x40; /* Not writable, is readable */ |
| cpu_to_be16wu((uint16_t *)(buf + 6), 2048 + 4); |
| |
| buf[8] = 0x01; /* Copyright info */ |
| buf[9] = 0x40; /* Not writable, is readable */ |
| cpu_to_be16wu((uint16_t *)(buf + 10), 4 + 4); |
| |
| buf[12] = 0x03; /* BCA info */ |
| buf[13] = 0x40; /* Not writable, is readable */ |
| cpu_to_be16wu((uint16_t *)(buf + 14), 188 + 4); |
| |
| buf[16] = 0x04; /* Manufacturing info */ |
| buf[17] = 0x40; /* Not writable, is readable */ |
| cpu_to_be16wu((uint16_t *)(buf + 18), 2048 + 4); |
| |
| /* Size of buffer, not including 2 byte size field */ |
| cpu_to_be16wu((uint16_t *)buf, 16 + 2); |
| |
| /* data written + 4 byte header */ |
| return (16 + 4); |
| |
| default: /* TODO: formats beyond DVD-ROM requires */ |
| return -ASC_INV_FIELD_IN_CMD_PACKET; |
| } |
| } |
| |
| static void ide_atapi_cmd(IDEState *s) |
| { |
| const uint8_t *packet; |
| uint8_t *buf; |
| int max_len; |
| |
| packet = s->io_buffer; |
| buf = s->io_buffer; |
| #ifdef DEBUG_IDE_ATAPI |
| { |
| int i; |
| printf("ATAPI limit=0x%x packet:", s->lcyl | (s->hcyl << 8)); |
| for(i = 0; i < ATAPI_PACKET_SIZE; i++) { |
| printf(" %02x", packet[i]); |
| } |
| printf("\n"); |
| } |
| #endif |
| /* If there's a UNIT_ATTENTION condition pending, only |
| REQUEST_SENSE and INQUIRY commands are allowed to complete. */ |
| if (s->sense_key == SENSE_UNIT_ATTENTION && |
| s->io_buffer[0] != GPCMD_REQUEST_SENSE && |
| s->io_buffer[0] != GPCMD_INQUIRY) { |
| ide_atapi_cmd_check_status(s); |
| return; |
| } |
| switch(s->io_buffer[0]) { |
| case GPCMD_TEST_UNIT_READY: |
| if (bdrv_is_inserted(s->bs) && !s->cdrom_changed) { |
| ide_atapi_cmd_ok(s); |
| } else { |
| s->cdrom_changed = 0; |
| ide_atapi_cmd_error(s, SENSE_NOT_READY, |
| ASC_MEDIUM_NOT_PRESENT); |
| } |
| break; |
| case GPCMD_MODE_SENSE_6: |
| case GPCMD_MODE_SENSE_10: |
| { |
| int action, code; |
| if (packet[0] == GPCMD_MODE_SENSE_10) |
| max_len = ube16_to_cpu(packet + 7); |
| else |
| max_len = packet[4]; |
| action = packet[2] >> 6; |
| code = packet[2] & 0x3f; |
| switch(action) { |
| case 0: /* current values */ |
| switch(code) { |
| case 0x01: /* error recovery */ |
| cpu_to_ube16(&buf[0], 16 + 6); |
| buf[2] = 0x70; |
| buf[3] = 0; |
| buf[4] = 0; |
| buf[5] = 0; |
| buf[6] = 0; |
| buf[7] = 0; |
| |
| buf[8] = 0x01; |
| buf[9] = 0x06; |
| buf[10] = 0x00; |
| buf[11] = 0x05; |
| buf[12] = 0x00; |
| buf[13] = 0x00; |
| buf[14] = 0x00; |
| buf[15] = 0x00; |
| ide_atapi_cmd_reply(s, 16, max_len); |
| break; |
| case 0x2a: |
| cpu_to_ube16(&buf[0], 28 + 6); |
| buf[2] = 0x70; |
| buf[3] = 0; |
| buf[4] = 0; |
| buf[5] = 0; |
| buf[6] = 0; |
| buf[7] = 0; |
| |
| buf[8] = 0x2a; |
| buf[9] = 0x12; |
| buf[10] = 0x00; |
| buf[11] = 0x00; |
| |
| /* Claim PLAY_AUDIO capability (0x01) since some Linux |
| code checks for this to automount media. */ |
| buf[12] = 0x71; |
| buf[13] = 3 << 5; |
| buf[14] = (1 << 0) | (1 << 3) | (1 << 5); |
| if (bdrv_is_locked(s->bs)) |
| buf[6] |= 1 << 1; |
| buf[15] = 0x00; |
| cpu_to_ube16(&buf[16], 706); |
| buf[18] = 0; |
| buf[19] = 2; |
| cpu_to_ube16(&buf[20], 512); |
| cpu_to_ube16(&buf[22], 706); |
| buf[24] = 0; |
| buf[25] = 0; |
| buf[26] = 0; |
| buf[27] = 0; |
| ide_atapi_cmd_reply(s, 28, max_len); |
| break; |
| default: |
| goto error_cmd; |
| } |
| break; |
| case 1: /* changeable values */ |
| goto error_cmd; |
| case 2: /* default values */ |
| goto error_cmd; |
| default: |
| case 3: /* saved values */ |
| ide_atapi_cmd_error(s, SENSE_ILLEGAL_REQUEST, |
| ASC_SAVING_PARAMETERS_NOT_SUPPORTED); |
| break; |
| } |
| } |
| break; |
| case GPCMD_REQUEST_SENSE: |
| max_len = packet[4]; |
| memset(buf, 0, 18); |
| buf[0] = 0x70 | (1 << 7); |
| buf[2] = s->sense_key; |
| buf[7] = 10; |
| buf[12] = s->asc; |
| if (s->sense_key == SENSE_UNIT_ATTENTION) |
| s->sense_key = SENSE_NONE; |
| ide_atapi_cmd_reply(s, 18, max_len); |
| break; |
| case GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL: |
| if (bdrv_is_inserted(s->bs)) { |
| bdrv_set_locked(s->bs, packet[4] & 1); |
| ide_atapi_cmd_ok(s); |
| } else { |
| ide_atapi_cmd_error(s, SENSE_NOT_READY, |
| ASC_MEDIUM_NOT_PRESENT); |
| } |
| break; |
| case GPCMD_READ_10: |
| case GPCMD_READ_12: |
| { |
| int nb_sectors, lba; |
| |
| if (packet[0] == GPCMD_READ_10) |
| nb_sectors = ube16_to_cpu(packet + 7); |
| else |
| nb_sectors = ube32_to_cpu(packet + 6); |
| lba = ube32_to_cpu(packet + 2); |
| if (nb_sectors == 0) { |
| ide_atapi_cmd_ok(s); |
| break; |
| } |
| ide_atapi_cmd_read(s, lba, nb_sectors, 2048); |
| } |
| break; |
| case GPCMD_READ_CD: |
| { |
| int nb_sectors, lba, transfer_request; |
| |
| nb_sectors = (packet[6] << 16) | (packet[7] << 8) | packet[8]; |
| lba = ube32_to_cpu(packet + 2); |
| if (nb_sectors == 0) { |
| ide_atapi_cmd_ok(s); |
| break; |
| } |
| transfer_request = packet[9]; |
| switch(transfer_request & 0xf8) { |
| case 0x00: |
| /* nothing */ |
| ide_atapi_cmd_ok(s); |
| break; |
| case 0x10: |
| /* normal read */ |
| ide_atapi_cmd_read(s, lba, nb_sectors, 2048); |
| break; |
| case 0xf8: |
| /* read all data */ |
| ide_atapi_cmd_read(s, lba, nb_sectors, 2352); |
| break; |
| default: |
| ide_atapi_cmd_error(s, SENSE_ILLEGAL_REQUEST, |
| ASC_INV_FIELD_IN_CMD_PACKET); |
| break; |
| } |
| } |
| break; |
| case GPCMD_SEEK: |
| { |
| unsigned int lba; |
| uint64_t total_sectors; |
| |
| bdrv_get_geometry(s->bs, &total_sectors); |
| total_sectors >>= 2; |
| if (total_sectors == 0) { |
| ide_atapi_cmd_error(s, SENSE_NOT_READY, |
| ASC_MEDIUM_NOT_PRESENT); |
| break; |
| } |
| lba = ube32_to_cpu(packet + 2); |
| if (lba >= total_sectors) { |
| ide_atapi_cmd_error(s, SENSE_ILLEGAL_REQUEST, |
| ASC_LOGICAL_BLOCK_OOR); |
| break; |
| } |
| ide_atapi_cmd_ok(s); |
| } |
| break; |
| case GPCMD_START_STOP_UNIT: |
| { |
| int start, eject, err = 0; |
| start = packet[4] & 1; |
| eject = (packet[4] >> 1) & 1; |
| |
| if (eject) { |
| err = bdrv_eject(s->bs, !start); |
| } |
| |
| switch (err) { |
| case 0: |
| ide_atapi_cmd_ok(s); |
| break; |
| case -EBUSY: |
| ide_atapi_cmd_error(s, SENSE_NOT_READY, |
| ASC_MEDIA_REMOVAL_PREVENTED); |
| break; |
| default: |
| ide_atapi_cmd_error(s, SENSE_NOT_READY, |
| ASC_MEDIUM_NOT_PRESENT); |
| break; |
| } |
| } |
| break; |
| case GPCMD_MECHANISM_STATUS: |
| { |
| max_len = ube16_to_cpu(packet + 8); |
| cpu_to_ube16(buf, 0); |
| /* no current LBA */ |
| buf[2] = 0; |
| buf[3] = 0; |
| buf[4] = 0; |
| buf[5] = 1; |
| cpu_to_ube16(buf + 6, 0); |
| ide_atapi_cmd_reply(s, 8, max_len); |
| } |
| break; |
| case GPCMD_READ_TOC_PMA_ATIP: |
| { |
| int format, msf, start_track, len; |
| uint64_t total_sectors; |
| |
| bdrv_get_geometry(s->bs, &total_sectors); |
| total_sectors >>= 2; |
| if (total_sectors == 0) { |
| ide_atapi_cmd_error(s, SENSE_NOT_READY, |
| ASC_MEDIUM_NOT_PRESENT); |
| break; |
| } |
| max_len = ube16_to_cpu(packet + 7); |
| format = packet[9] >> 6; |
| msf = (packet[1] >> 1) & 1; |
| start_track = packet[6]; |
| switch(format) { |
| case 0: |
| len = cdrom_read_toc(total_sectors, buf, msf, start_track); |
| if (len < 0) |
| goto error_cmd; |
| ide_atapi_cmd_reply(s, len, max_len); |
| break; |
| case 1: |
| /* multi session : only a single session defined */ |
| memset(buf, 0, 12); |
| buf[1] = 0x0a; |
| buf[2] = 0x01; |
| buf[3] = 0x01; |
| ide_atapi_cmd_reply(s, 12, max_len); |
| break; |
| case 2: |
| len = cdrom_read_toc_raw(total_sectors, buf, msf, start_track); |
| if (len < 0) |
| goto error_cmd; |
| ide_atapi_cmd_reply(s, len, max_len); |
| break; |
| default: |
| error_cmd: |
| ide_atapi_cmd_error(s, SENSE_ILLEGAL_REQUEST, |
| ASC_INV_FIELD_IN_CMD_PACKET); |
| break; |
| } |
| } |
| break; |
| case GPCMD_READ_CDVD_CAPACITY: |
| { |
| uint64_t total_sectors; |
| |
| bdrv_get_geometry(s->bs, &total_sectors); |
| total_sectors >>= 2; |
| if (total_sectors == 0) { |
| ide_atapi_cmd_error(s, SENSE_NOT_READY, |
| ASC_MEDIUM_NOT_PRESENT); |
| break; |
| } |
| /* NOTE: it is really the number of sectors minus 1 */ |
| cpu_to_ube32(buf, total_sectors - 1); |
| cpu_to_ube32(buf + 4, 2048); |
| ide_atapi_cmd_reply(s, 8, 8); |
| } |
| break; |
| case GPCMD_READ_DVD_STRUCTURE: |
| { |
| int media = packet[1]; |
| int format = packet[7]; |
| int ret; |
| |
| max_len = ube16_to_cpu(packet + 8); |
| |
| if (format < 0xff) { |
| if (media_is_cd(s)) { |
| ide_atapi_cmd_error(s, SENSE_ILLEGAL_REQUEST, |
| ASC_INCOMPATIBLE_FORMAT); |
| break; |
| } else if (!media_present(s)) { |
| ide_atapi_cmd_error(s, SENSE_ILLEGAL_REQUEST, |
| ASC_INV_FIELD_IN_CMD_PACKET); |
| break; |
| } |
| } |
| |
| memset(buf, 0, max_len > IDE_DMA_BUF_SECTORS * 512 + 4 ? |
| IDE_DMA_BUF_SECTORS * 512 + 4 : max_len); |
| |
| switch (format) { |
| case 0x00 ... 0x7f: |
| case 0xff: |
| if (media == 0) { |
| ret = ide_dvd_read_structure(s, format, packet, buf); |
| |
| if (ret < 0) |
| ide_atapi_cmd_error(s, SENSE_ILLEGAL_REQUEST, -ret); |
| else |
| ide_atapi_cmd_reply(s, ret, max_len); |
| |
| break; |
| } |
| /* TODO: BD support, fall through for now */ |
| |
| /* Generic disk structures */ |
| case 0x80: /* TODO: AACS volume identifier */ |
| case 0x81: /* TODO: AACS media serial number */ |
| case 0x82: /* TODO: AACS media identifier */ |
| case 0x83: /* TODO: AACS media key block */ |
| case 0x90: /* TODO: List of recognized format layers */ |
| case 0xc0: /* TODO: Write protection status */ |
| default: |
| ide_atapi_cmd_error(s, SENSE_ILLEGAL_REQUEST, |
| ASC_INV_FIELD_IN_CMD_PACKET); |
| break; |
| } |
| } |
| break; |
| case GPCMD_SET_SPEED: |
| ide_atapi_cmd_ok(s); |
| break; |
| case GPCMD_INQUIRY: |
| max_len = packet[4]; |
| buf[0] = 0x05; /* CD-ROM */ |
| buf[1] = 0x80; /* removable */ |
| buf[2] = 0x00; /* ISO */ |
| buf[3] = 0x21; /* ATAPI-2 (XXX: put ATAPI-4 ?) */ |
| buf[4] = 31; /* additional length */ |
| buf[5] = 0; /* reserved */ |
| buf[6] = 0; /* reserved */ |
| buf[7] = 0; /* reserved */ |
| padstr8(buf + 8, 8, "QEMU"); |
| padstr8(buf + 16, 16, "QEMU DVD-ROM"); |
| padstr8(buf + 32, 4, QEMU_VERSION); |
| ide_atapi_cmd_reply(s, 36, max_len); |
| break; |
| case GPCMD_GET_CONFIGURATION: |
| { |
| uint32_t len; |
| uint8_t index = 0; |
| |
| /* only feature 0 is supported */ |
| if (packet[2] != 0 || packet[3] != 0) { |
| ide_atapi_cmd_error(s, SENSE_ILLEGAL_REQUEST, |
| ASC_INV_FIELD_IN_CMD_PACKET); |
| break; |
| } |
| |
| /* XXX: could result in alignment problems in some architectures */ |
| max_len = ube16_to_cpu(packet + 7); |
| |
| /* |
| * XXX: avoid overflow for io_buffer if max_len is bigger than |
| * the size of that buffer (dimensioned to max number of |
| * sectors to transfer at once) |
| * |
| * Only a problem if the feature/profiles grow. |
| */ |
| if (max_len > 512) /* XXX: assume 1 sector */ |
| max_len = 512; |
| |
| memset(buf, 0, max_len); |
| /* |
| * the number of sectors from the media tells us which profile |
| * to use as current. 0 means there is no media |
| */ |
| if (media_is_dvd(s)) |
| cpu_to_ube16(buf + 6, MMC_PROFILE_DVD_ROM); |
| else if (media_is_cd(s)) |
| cpu_to_ube16(buf + 6, MMC_PROFILE_CD_ROM); |
| |
| buf[10] = 0x02 | 0x01; /* persistent and current */ |
| len = 12; /* headers: 8 + 4 */ |
| len += ide_atapi_set_profile(buf, &index, MMC_PROFILE_DVD_ROM); |
| len += ide_atapi_set_profile(buf, &index, MMC_PROFILE_CD_ROM); |
| cpu_to_ube32(buf, len - 4); /* data length */ |
| |
| ide_atapi_cmd_reply(s, len, max_len); |
| break; |
| } |
| default: |
| ide_atapi_cmd_error(s, SENSE_ILLEGAL_REQUEST, |
| ASC_ILLEGAL_OPCODE); |
| break; |
| } |
| } |
| |
| static void ide_cfata_metadata_inquiry(IDEState *s) |
| { |
| uint16_t *p; |
| uint32_t spd; |
| |
| p = (uint16_t *) s->io_buffer; |
| memset(p, 0, 0x200); |
| spd = ((s->mdata_size - 1) >> 9) + 1; |
| |
| put_le16(p + 0, 0x0001); /* Data format revision */ |
| put_le16(p + 1, 0x0000); /* Media property: silicon */ |
| put_le16(p + 2, s->media_changed); /* Media status */ |
| put_le16(p + 3, s->mdata_size & 0xffff); /* Capacity in bytes (low) */ |
| put_le16(p + 4, s->mdata_size >> 16); /* Capacity in bytes (high) */ |
| put_le16(p + 5, spd & 0xffff); /* Sectors per device (low) */ |
| put_le16(p + 6, spd >> 16); /* Sectors per device (high) */ |
| } |
| |
| static void ide_cfata_metadata_read(IDEState *s) |
| { |
| uint16_t *p; |
| |
| if (((s->hcyl << 16) | s->lcyl) << 9 > s->mdata_size + 2) { |
| s->status = ERR_STAT; |
| s->error = ABRT_ERR; |
| return; |
| } |
| |
| p = (uint16_t *) s->io_buffer; |
| memset(p, 0, 0x200); |
| |
| put_le16(p + 0, s->media_changed); /* Media status */ |
| memcpy(p + 1, s->mdata_storage + (((s->hcyl << 16) | s->lcyl) << 9), |
| MIN(MIN(s->mdata_size - (((s->hcyl << 16) | s->lcyl) << 9), |
| s->nsector << 9), 0x200 - 2)); |
| } |
| |
| static void ide_cfata_metadata_write(IDEState *s) |
| { |
| if (((s->hcyl << 16) | s->lcyl) << 9 > s->mdata_size + 2) { |
| s->status = ERR_STAT; |
| s->error = ABRT_ERR; |
| return; |
| } |
| |
| s->media_changed = 0; |
| |
| memcpy(s->mdata_storage + (((s->hcyl << 16) | s->lcyl) << 9), |
| s->io_buffer + 2, |
| MIN(MIN(s->mdata_size - (((s->hcyl << 16) | s->lcyl) << 9), |
| s->nsector << 9), 0x200 - 2)); |
| } |
| |
| /* called when the inserted state of the media has changed */ |
| static void cdrom_change_cb(void *opaque) |
| { |
| IDEState *s = opaque; |
| uint64_t nb_sectors; |
| |
| bdrv_get_geometry(s->bs, &nb_sectors); |
| s->nb_sectors = nb_sectors; |
| |
| s->sense_key = SENSE_UNIT_ATTENTION; |
| s->asc = ASC_MEDIUM_MAY_HAVE_CHANGED; |
| s->cdrom_changed = 1; |
| ide_set_irq(s->bus); |
| } |
| |
| static void ide_cmd_lba48_transform(IDEState *s, int lba48) |
| { |
| s->lba48 = lba48; |
| |
| /* handle the 'magic' 0 nsector count conversion here. to avoid |
| * fiddling with the rest of the read logic, we just store the |
| * full sector count in ->nsector and ignore ->hob_nsector from now |
| */ |
| if (!s->lba48) { |
| if (!s->nsector) |
| s->nsector = 256; |
| } else { |
| if (!s->nsector && !s->hob_nsector) |
| s->nsector = 65536; |
| else { |
| int lo = s->nsector; |
| int hi = s->hob_nsector; |
| |
| s->nsector = (hi << 8) | lo; |
| } |
| } |
| } |
| |
| static void ide_clear_hob(IDEBus *bus) |
| { |
| /* any write clears HOB high bit of device control register */ |
| bus->ifs[0].select &= ~(1 << 7); |
| bus->ifs[1].select &= ~(1 << 7); |
| } |
| |
| void ide_ioport_write(void *opaque, uint32_t addr, uint32_t val) |
| { |
| IDEBus *bus = opaque; |
| IDEState *s; |
| int n; |
| int lba48 = 0; |
| |
| #ifdef DEBUG_IDE |
| printf("IDE: write addr=0x%x val=0x%02x\n", addr, val); |
| #endif |
| |
| addr &= 7; |
| |
| /* ignore writes to command block while busy with previous command */ |
| if (addr != 7 && (idebus_active_if(bus)->status & (BUSY_STAT|DRQ_STAT))) |
| return; |
| |
| switch(addr) { |
| case 0: |
| break; |
| case 1: |
| ide_clear_hob(bus); |
| /* NOTE: data is written to the two drives */ |
| bus->ifs[0].hob_feature = bus->ifs[0].feature; |
| bus->ifs[1].hob_feature = bus->ifs[1].feature; |
| bus->ifs[0].feature = val; |
| bus->ifs[1].feature = val; |
| break; |
| case 2: |
| ide_clear_hob(bus); |
| bus->ifs[0].hob_nsector = bus->ifs[0].nsector; |
| bus->ifs[1].hob_nsector = bus->ifs[1].nsector; |
| bus->ifs[0].nsector = val; |
| bus->ifs[1].nsector = val; |
| break; |
| case 3: |
| ide_clear_hob(bus); |
| bus->ifs[0].hob_sector = bus->ifs[0].sector; |
| bus->ifs[1].hob_sector = bus->ifs[1].sector; |
| bus->ifs[0].sector = val; |
| bus->ifs[1].sector = val; |
| break; |
| case 4: |
| ide_clear_hob(bus); |
| bus->ifs[0].hob_lcyl = bus->ifs[0].lcyl; |
| bus->ifs[1].hob_lcyl = bus->ifs[1].lcyl; |
| bus->ifs[0].lcyl = val; |
| bus->ifs[1].lcyl = val; |
| break; |
| case 5: |
| ide_clear_hob(bus); |
| bus->ifs[0].hob_hcyl = bus->ifs[0].hcyl; |
| bus->ifs[1].hob_hcyl = bus->ifs[1].hcyl; |
| bus->ifs[0].hcyl = val; |
| bus->ifs[1].hcyl = val; |
| break; |
| case 6: |
| /* FIXME: HOB readback uses bit 7 */ |
| bus->ifs[0].select = (val & ~0x10) | 0xa0; |
| bus->ifs[1].select = (val | 0x10) | 0xa0; |
| /* select drive */ |
| bus->unit = (val >> 4) & 1; |
| break; |
| default: |
| case 7: |
| /* command */ |
| #if defined(DEBUG_IDE) |
| printf("ide: CMD=%02x\n", val); |
| #endif |
| s = idebus_active_if(bus); |
| /* ignore commands to non existant slave */ |
| if (s != bus->ifs && !s->bs) |
| break; |
| |
| /* Only DEVICE RESET is allowed while BSY or/and DRQ are set */ |
| if ((s->status & (BUSY_STAT|DRQ_STAT)) && val != WIN_DEVICE_RESET) |
| break; |
| |
| switch(val) { |
| case WIN_IDENTIFY: |
| if (s->bs && !s->is_cdrom) { |
| if (!s->is_cf) |
| ide_identify(s); |
| else |
| ide_cfata_identify(s); |
| s->status = READY_STAT | SEEK_STAT; |
| ide_transfer_start(s, s->io_buffer, 512, ide_transfer_stop); |
| } else { |
| if (s->is_cdrom) { |
| ide_set_signature(s); |
| } |
| ide_abort_command(s); |
| } |
| ide_set_irq(s->bus); |
| break; |
| case WIN_SPECIFY: |
| case WIN_RECAL: |
| s->error = 0; |
| s->status = READY_STAT | SEEK_STAT; |
| ide_set_irq(s->bus); |
| break; |
| case WIN_SETMULT: |
| if (s->is_cf && s->nsector == 0) { |
| /* Disable Read and Write Multiple */ |
| s->mult_sectors = 0; |
| s->status = READY_STAT | SEEK_STAT; |
| } else if ((s->nsector & 0xff) != 0 && |
| ((s->nsector & 0xff) > MAX_MULT_SECTORS || |
| (s->nsector & (s->nsector - 1)) != 0)) { |
| ide_abort_command(s); |
| } else { |
| s->mult_sectors = s->nsector & 0xff; |
| s->status = READY_STAT | SEEK_STAT; |
| } |
| ide_set_irq(s->bus); |
| break; |
| case WIN_VERIFY_EXT: |
| lba48 = 1; |
| case WIN_VERIFY: |
| case WIN_VERIFY_ONCE: |
| /* do sector number check ? */ |
| ide_cmd_lba48_transform(s, lba48); |
| s->status = READY_STAT | SEEK_STAT; |
| ide_set_irq(s->bus); |
| break; |
| case WIN_READ_EXT: |
| lba48 = 1; |
| case WIN_READ: |
| case WIN_READ_ONCE: |
| if (!s->bs) |
| goto abort_cmd; |
| ide_cmd_lba48_transform(s, lba48); |
| s->req_nb_sectors = 1; |
| ide_sector_read(s); |
| break; |
| case WIN_WRITE_EXT: |
| lba48 = 1; |
| case WIN_WRITE: |
| case WIN_WRITE_ONCE: |
| case CFA_WRITE_SECT_WO_ERASE: |
| case WIN_WRITE_VERIFY: |
| ide_cmd_lba48_transform(s, lba48); |
| s->error = 0; |
| s->status = SEEK_STAT | READY_STAT; |
| s->req_nb_sectors = 1; |
| ide_transfer_start(s, s->io_buffer, 512, ide_sector_write); |
| s->media_changed = 1; |
| break; |
| case WIN_MULTREAD_EXT: |
| lba48 = 1; |
| case WIN_MULTREAD: |
| if (!s->mult_sectors) |
| goto abort_cmd; |
| ide_cmd_lba48_transform(s, lba48); |
| s->req_nb_sectors = s->mult_sectors; |
| ide_sector_read(s); |
| break; |
| case WIN_MULTWRITE_EXT: |
| lba48 = 1; |
| case WIN_MULTWRITE: |
| case CFA_WRITE_MULTI_WO_ERASE: |
| if (!s->mult_sectors) |
| goto abort_cmd; |
| ide_cmd_lba48_transform(s, lba48); |
| s->error = 0; |
| s->status = SEEK_STAT | READY_STAT; |
| s->req_nb_sectors = s->mult_sectors; |
| n = s->nsector; |
| if (n > s->req_nb_sectors) |
| n = s->req_nb_sectors; |
| ide_transfer_start(s, s->io_buffer, 512 * n, ide_sector_write); |
| s->media_changed = 1; |
| break; |
| case WIN_READDMA_EXT: |
| lba48 = 1; |
| case WIN_READDMA: |
| case WIN_READDMA_ONCE: |
| if (!s->bs) |
| goto abort_cmd; |
| ide_cmd_lba48_transform(s, lba48); |
| ide_sector_read_dma(s); |
| break; |
| case WIN_WRITEDMA_EXT: |
| lba48 = 1; |
| case WIN_WRITEDMA: |
| case WIN_WRITEDMA_ONCE: |
| if (!s->bs) |
| goto abort_cmd; |
| ide_cmd_lba48_transform(s, lba48); |
| ide_sector_write_dma(s); |
| s->media_changed = 1; |
| break; |
| case WIN_READ_NATIVE_MAX_EXT: |
| lba48 = 1; |
| case WIN_READ_NATIVE_MAX: |
| ide_cmd_lba48_transform(s, lba48); |
| ide_set_sector(s, s->nb_sectors - 1); |
| s->status = READY_STAT | SEEK_STAT; |
| ide_set_irq(s->bus); |
| break; |
| case WIN_CHECKPOWERMODE1: |
| case WIN_CHECKPOWERMODE2: |
| s->nsector = 0xff; /* device active or idle */ |
| s->status = READY_STAT | SEEK_STAT; |
| ide_set_irq(s->bus); |
| break; |
| case WIN_SETFEATURES: |
| if (!s->bs) |
| goto abort_cmd; |
| /* XXX: valid for CDROM ? */ |
| switch(s->feature) { |
| case 0xcc: /* reverting to power-on defaults enable */ |
| case 0x66: /* reverting to power-on defaults disable */ |
| case 0x02: /* write cache enable */ |
| case 0x82: /* write cache disable */ |
| case 0xaa: /* read look-ahead enable */ |
| case 0x55: /* read look-ahead disable */ |
| case 0x05: /* set advanced power management mode */ |
| case 0x85: /* disable advanced power management mode */ |
| case 0x69: /* NOP */ |
| case 0x67: /* NOP */ |
| case 0x96: /* NOP */ |
| case 0x9a: /* NOP */ |
| case 0x42: /* enable Automatic Acoustic Mode */ |
| case 0xc2: /* disable Automatic Acoustic Mode */ |
| s->status = READY_STAT | SEEK_STAT; |
| ide_set_irq(s->bus); |
| break; |
| case 0x03: { /* set transfer mode */ |
| uint8_t val = s->nsector & 0x07; |
| |
| switch (s->nsector >> 3) { |
| case 0x00: /* pio default */ |
| case 0x01: /* pio mode */ |
| put_le16(s->identify_data + 62,0x07); |
| put_le16(s->identify_data + 63,0x07); |
| put_le16(s->identify_data + 88,0x3f); |
| break; |
| case 0x02: /* sigle word dma mode*/ |
| put_le16(s->identify_data + 62,0x07 | (1 << (val + 8))); |
| put_le16(s->identify_data + 63,0x07); |
| put_le16(s->identify_data + 88,0x3f); |
| break; |
| case 0x04: /* mdma mode */ |
| put_le16(s->identify_data + 62,0x07); |
| put_le16(s->identify_data + 63,0x07 | (1 << (val + 8))); |
| put_le16(s->identify_data + 88,0x3f); |
| break; |
| case 0x08: /* udma mode */ |
| put_le16(s->identify_data + 62,0x07); |
| put_le16(s->identify_data + 63,0x07); |
| put_le16(s->identify_data + 88,0x3f | (1 << (val + 8))); |
| break; |
| default: |
| goto abort_cmd; |
| } |
| s->status = READY_STAT | SEEK_STAT; |
| ide_set_irq(s->bus); |
| break; |
| } |
| default: |
| goto abort_cmd; |
| } |
| break; |
| case WIN_FLUSH_CACHE: |
| case WIN_FLUSH_CACHE_EXT: |
| if (s->bs) |
| bdrv_aio_flush(s->bs, ide_flush_cb, s); |
| else |
| ide_flush_cb(s, 0); |
| break; |
| case WIN_STANDBY: |
| case WIN_STANDBY2: |
| case WIN_STANDBYNOW1: |
| case WIN_STANDBYNOW2: |
| case WIN_IDLEIMMEDIATE: |
| case CFA_IDLEIMMEDIATE: |
| case WIN_SETIDLE1: |
| case WIN_SETIDLE2: |
| case WIN_SLEEPNOW1: |
| case WIN_SLEEPNOW2: |
| s->status = READY_STAT; |
| ide_set_irq(s->bus); |
| break; |
| case WIN_SEEK: |
| if(s->is_cdrom) |
| goto abort_cmd; |
| /* XXX: Check that seek is within bounds */ |
| s->status = READY_STAT | SEEK_STAT; |
| ide_set_irq(s->bus); |
| break; |
| /* ATAPI commands */ |
| case WIN_PIDENTIFY: |
| if (s->is_cdrom) { |
| ide_atapi_identify(s); |
| s->status = READY_STAT | SEEK_STAT; |
| ide_transfer_start(s, s->io_buffer, 512, ide_transfer_stop); |
| } else { |
| ide_abort_command(s); |
| } |
| ide_set_irq(s->bus); |
| break; |
| case WIN_DIAGNOSE: |
| ide_set_signature(s); |
| if (s->is_cdrom) |
| s->status = 0; /* ATAPI spec (v6) section 9.10 defines packet |
| * devices to return a clear status register |
| * with READY_STAT *not* set. */ |
| else |
| s->status = READY_STAT | SEEK_STAT; |
| s->error = 0x01; /* Device 0 passed, Device 1 passed or not |
| * present. |
| */ |
| ide_set_irq(s->bus); |
| break; |
| case WIN_SRST: |
| if (!s->is_cdrom) |
| goto abort_cmd; |
| ide_set_signature(s); |
| s->status = 0x00; /* NOTE: READY is _not_ set */ |
| s->error = 0x01; |
| break; |
| case WIN_PACKETCMD: |
| if (!s->is_cdrom) |
| goto abort_cmd; |
| /* overlapping commands not supported */ |
| if (s->feature & 0x02) |
| goto abort_cmd; |
| s->status = READY_STAT | SEEK_STAT; |
| s->atapi_dma = s->feature & 1; |
| s->nsector = 1; |
| ide_transfer_start(s, s->io_buffer, ATAPI_PACKET_SIZE, |
| ide_atapi_cmd); |
| break; |
| /* CF-ATA commands */ |
| case CFA_REQ_EXT_ERROR_CODE: |
| if (!s->is_cf) |
| goto abort_cmd; |
| s->error = 0x09; /* miscellaneous error */ |
| s->status = READY_STAT | SEEK_STAT; |
| ide_set_irq(s->bus); |
| break; |
| case CFA_ERASE_SECTORS: |
| case CFA_WEAR_LEVEL: |
| if (!s->is_cf) |
| goto abort_cmd; |
| if (val == CFA_WEAR_LEVEL) |
| s->nsector = 0; |
| if (val == CFA_ERASE_SECTORS) |
| s->media_changed = 1; |
| s->error = 0x00; |
| s->status = READY_STAT | SEEK_STAT; |
| ide_set_irq(s->bus); |
| break; |
| case CFA_TRANSLATE_SECTOR: |
| if (!s->is_cf) |
| goto abort_cmd; |
| s->error = 0x00; |
| s->status = READY_STAT | SEEK_STAT; |
| memset(s->io_buffer, 0, 0x200); |
| s->io_buffer[0x00] = s->hcyl; /* Cyl MSB */ |
| s->io_buffer[0x01] = s->lcyl; /* Cyl LSB */ |
| s->io_buffer[0x02] = s->select; /* Head */ |
| s->io_buffer[0x03] = s->sector; /* Sector */ |
| s->io_buffer[0x04] = ide_get_sector(s) >> 16; /* LBA MSB */ |
| s->io_buffer[0x05] = ide_get_sector(s) >> 8; /* LBA */ |
| s->io_buffer[0x06] = ide_get_sector(s) >> 0; /* LBA LSB */ |
| s->io_buffer[0x13] = 0x00; /* Erase flag */ |
| s->io_buffer[0x18] = 0x00; /* Hot count */ |
| s->io_buffer[0x19] = 0x00; /* Hot count */ |
| s->io_buffer[0x1a] = 0x01; /* Hot count */ |
| ide_transfer_start(s, s->io_buffer, 0x200, ide_transfer_stop); |
| ide_set_irq(s->bus); |
| break; |
| case CFA_ACCESS_METADATA_STORAGE: |
| if (!s->is_cf) |
| goto abort_cmd; |
| switch (s->feature) { |
| case 0x02: /* Inquiry Metadata Storage */ |
| ide_cfata_metadata_inquiry(s); |
| break; |
| case 0x03: /* Read Metadata Storage */ |
| ide_cfata_metadata_read(s); |
| break; |
| case 0x04: /* Write Metadata Storage */ |
| ide_cfata_metadata_write(s); |
| break; |
| default: |
| goto abort_cmd; |
| } |
| ide_transfer_start(s, s->io_buffer, 0x200, ide_transfer_stop); |
| s->status = 0x00; /* NOTE: READY is _not_ set */ |
| ide_set_irq(s->bus); |
| break; |
| case IBM_SENSE_CONDITION: |
| if (!s->is_cf) |
| goto abort_cmd; |
| switch (s->feature) { |
| case 0x01: /* sense temperature in device */ |
| s->nsector = 0x50; /* +20 C */ |
| break; |
| default: |
| goto abort_cmd; |
| } |
| s->status = READY_STAT | SEEK_STAT; |
| ide_set_irq(s->bus); |
| break; |
| |
| case WIN_SMART: |
| if (s->is_cdrom) |
| goto abort_cmd; |
| if (s->hcyl != 0xc2 || s->lcyl != 0x4f) |
| goto abort_cmd; |
| if (!s->smart_enabled && s->feature != SMART_ENABLE) |
| goto abort_cmd; |
| switch (s->feature) { |
| case SMART_DISABLE: |
| s->smart_enabled = 0; |
| s->status = READY_STAT | SEEK_STAT; |
| ide_set_irq(s->bus); |
| break; |
| case SMART_ENABLE: |
| s->smart_enabled = 1; |
| s->status = READY_STAT | SEEK_STAT; |
| ide_set_irq(s->bus); |
| break; |
| case SMART_ATTR_AUTOSAVE: |
| switch (s->sector) { |
| case 0x00: |
| s->smart_autosave = 0; |
| break; |
| case 0xf1: |
| s->smart_autosave = 1; |
| break; |
| default: |
| goto abort_cmd; |
| } |
| s->status = READY_STAT | SEEK_STAT; |
| ide_set_irq(s->bus); |
| break; |
| case SMART_STATUS: |
| if (!s->smart_errors) { |
| s->hcyl = 0xc2; |
| s->lcyl = 0x4f; |
| } else { |
| s->hcyl = 0x2c; |
| s->lcyl = 0xf4; |
| } |
| s->status = READY_STAT | SEEK_STAT; |
| ide_set_irq(s->bus); |
| break; |
| case SMART_READ_THRESH: |
| memset(s->io_buffer, 0, 0x200); |
| s->io_buffer[0] = 0x01; /* smart struct version */ |
| for (n=0; n<30; n++) { |
| if (smart_attributes[n][0] == 0) |
| break; |
| s->io_buffer[2+0+(n*12)] = smart_attributes[n][0]; |
| s->io_buffer[2+1+(n*12)] = smart_attributes[n][4]; |
| } |
| for (n=0; n<511; n++) /* checksum */ |
| s->io_buffer[511] += s->io_buffer[n]; |
| s->io_buffer[511] = 0x100 - s->io_buffer[511]; |
| s->status = READY_STAT | SEEK_STAT; |
| ide_transfer_start(s, s->io_buffer, 0x200, ide_transfer_stop); |
| ide_set_irq(s->bus); |
| break; |
| case SMART_READ_DATA: |
| memset(s->io_buffer, 0, 0x200); |
| s->io_buffer[0] = 0x01; /* smart struct version */ |
| for (n=0; n<30; n++) { |
| if (smart_attributes[n][0] == 0) |
| break; |
| s->io_buffer[2+0+(n*12)] = smart_attributes[n][0]; |
| s->io_buffer[2+1+(n*12)] = smart_attributes[n][1]; |
| s->io_buffer[2+3+(n*12)] = smart_attributes[n][2]; |
| s->io_buffer[2+4+(n*12)] = smart_attributes[n][3]; |
| } |
| s->io_buffer[362] = 0x02 | (s->smart_autosave?0x80:0x00); |
| if (s->smart_selftest_count == 0) { |
| s->io_buffer[363] = 0; |
| } else { |
| s->io_buffer[363] = |
| s->smart_selftest_data[3 + |
| (s->smart_selftest_count - 1) * |
| 24]; |
| } |
| s->io_buffer[364] = 0x20; |
| s->io_buffer[365] = 0x01; |
| /* offline data collection capacity: execute + self-test*/ |
| s->io_buffer[367] = (1<<4 | 1<<3 | 1); |
| s->io_buffer[368] = 0x03; /* smart capability (1) */ |
| s->io_buffer[369] = 0x00; /* smart capability (2) */ |
| s->io_buffer[370] = 0x01; /* error logging supported */ |
| s->io_buffer[372] = 0x02; /* minutes for poll short test */ |
| s->io_buffer[373] = 0x36; /* minutes for poll ext test */ |
| s->io_buffer[374] = 0x01; /* minutes for poll conveyance */ |
| |
| for (n=0; n<511; n++) |
| s->io_buffer[511] += s->io_buffer[n]; |
| s->io_buffer[511] = 0x100 - s->io_buffer[511]; |
| s->status = READY_STAT | SEEK_STAT; |
| ide_transfer_start(s, s->io_buffer, 0x200, ide_transfer_stop); |
| ide_set_irq(s->bus); |
| break; |
| case SMART_READ_LOG: |
| switch (s->sector) { |
| case 0x01: /* summary smart error log */ |
| memset(s->io_buffer, 0, 0x200); |
| s->io_buffer[0] = 0x01; |
| s->io_buffer[1] = 0x00; /* no error entries */ |
| s->io_buffer[452] = s->smart_errors & 0xff; |
| s->io_buffer[453] = (s->smart_errors & 0xff00) >> 8; |
| |
| for (n=0; n<511; n++) |
| s->io_buffer[511] += s->io_buffer[n]; |
| s->io_buffer[511] = 0x100 - s->io_buffer[511]; |
| break; |
| case 0x06: /* smart self test log */ |
| memset(s->io_buffer, 0, 0x200); |
| s->io_buffer[0] = 0x01; |
| if (s->smart_selftest_count == 0) { |
| s->io_buffer[508] = 0; |
| } else { |
| s->io_buffer[508] = s->smart_selftest_count; |
| for (n=2; n<506; n++) |
| s->io_buffer[n] = s->smart_selftest_data[n]; |
| } |
| for (n=0; n<511; n++) |
| s->io_buffer[511] += s->io_buffer[n]; |
| s->io_buffer[511] = 0x100 - s->io_buffer[511]; |
| break; |
| default: |
| goto abort_cmd; |
| } |
| s->status = READY_STAT | SEEK_STAT; |
| ide_transfer_start(s, s->io_buffer, 0x200, ide_transfer_stop); |
| ide_set_irq(s->bus); |
| break; |
| case SMART_EXECUTE_OFFLINE: |
| switch (s->sector) { |
| case 0: /* off-line routine */ |
| case 1: /* short self test */ |
| case 2: /* extended self test */ |
| s->smart_selftest_count++; |
| if(s->smart_selftest_count > 21) |
| s->smart_selftest_count = 0; |
| n = 2 + (s->smart_selftest_count - 1) * 24; |
| s->smart_selftest_data[n] = s->sector; |
| s->smart_selftest_data[n+1] = 0x00; /* OK and finished */ |
| s->smart_selftest_data[n+2] = 0x34; /* hour count lsb */ |
| s->smart_selftest_data[n+3] = 0x12; /* hour count msb */ |
| s->status = READY_STAT | SEEK_STAT; |
| ide_set_irq(s->bus); |
| break; |
| default: |
| goto abort_cmd; |
| } |
| break; |
| default: |
| goto abort_cmd; |
| } |
| break; |
| default: |
| abort_cmd: |
| ide_abort_command(s); |
| ide_set_irq(s->bus); |
| break; |
| } |
| } |
| } |
| |
| uint32_t ide_ioport_read(void *opaque, uint32_t addr1) |
| { |
| IDEBus *bus = opaque; |
| IDEState *s = idebus_active_if(bus); |
| uint32_t addr; |
| int ret, hob; |
| |
| addr = addr1 & 7; |
| /* FIXME: HOB readback uses bit 7, but it's always set right now */ |
| //hob = s->select & (1 << 7); |
| hob = 0; |
| switch(addr) { |
| case 0: |
| ret = 0xff; |
| break; |
| case 1: |
| if ((!bus->ifs[0].bs && !bus->ifs[1].bs) || |
| (s != bus->ifs && !s->bs)) |
| ret = 0; |
| else if (!hob) |
| ret = s->error; |
| else |
| ret = s->hob_feature; |
| break; |
| case 2: |
| if (!bus->ifs[0].bs && !bus->ifs[1].bs) |
| ret = 0; |
| else if (!hob) |
| ret = s->nsector & 0xff; |
| else |
| ret = s->hob_nsector; |
| break; |
| case 3: |
| if (!bus->ifs[0].bs && !bus->ifs[1].bs) |
| ret = 0; |
| else if (!hob) |
| ret = s->sector; |
| else |
| ret = s->hob_sector; |
| break; |
| case 4: |
| if (!bus->ifs[0].bs && !bus->ifs[1].bs) |
| ret = 0; |
| else if (!hob) |
| ret = s->lcyl; |
| else |
| ret = s->hob_lcyl; |
| break; |
| case 5: |
| if (!bus->ifs[0].bs && !bus->ifs[1].bs) |
| ret = 0; |
| else if (!hob) |
| ret = s->hcyl; |
| else |
| ret = s->hob_hcyl; |
| break; |
| case 6: |
| if (!bus->ifs[0].bs && !bus->ifs[1].bs) |
| ret = 0; |
| else |
| ret = s->select; |
| break; |
| default: |
| case 7: |
| if ((!bus->ifs[0].bs && !bus->ifs[1].bs) || |
| (s != bus->ifs && !s->bs)) |
| ret = 0; |
| else |
| ret = s->status; |
| qemu_irq_lower(bus->irq); |
| break; |
| } |
| #ifdef DEBUG_IDE |
| printf("ide: read addr=0x%x val=%02x\n", addr1, ret); |
| #endif |
| return ret; |
| } |
| |
| uint32_t ide_status_read(void *opaque, uint32_t addr) |
| { |
| IDEBus *bus = opaque; |
| IDEState *s = idebus_active_if(bus); |
| int ret; |
| |
| if ((!bus->ifs[0].bs && !bus->ifs[1].bs) || |
| (s != bus->ifs && !s->bs)) |
| ret = 0; |
| else |
| ret = s->status; |
| #ifdef DEBUG_IDE |
| printf("ide: read status addr=0x%x val=%02x\n", addr, ret); |
| #endif |
| return ret; |
| } |
| |
| void ide_cmd_write(void *opaque, uint32_t addr, uint32_t val) |
| { |
| IDEBus *bus = opaque; |
| IDEState *s; |
| int i; |
| |
| #ifdef DEBUG_IDE |
| printf("ide: write control addr=0x%x val=%02x\n", addr, val); |
| #endif |
| /* common for both drives */ |
| if (!(bus->cmd & IDE_CMD_RESET) && |
| (val & IDE_CMD_RESET)) { |
| /* reset low to high */ |
| for(i = 0;i < 2; i++) { |
| s = &bus->ifs[i]; |
| s->status = BUSY_STAT | SEEK_STAT; |
| s->error = 0x01; |
| } |
| } else if ((bus->cmd & IDE_CMD_RESET) && |
| !(val & IDE_CMD_RESET)) { |
| /* high to low */ |
| for(i = 0;i < 2; i++) { |
| s = &bus->ifs[i]; |
| if (s->is_cdrom) |
| s->status = 0x00; /* NOTE: READY is _not_ set */ |
| else |
| s->status = READY_STAT | SEEK_STAT; |
| ide_set_signature(s); |
| } |
| } |
| |
| bus->cmd = val; |
| } |
| |
| void ide_data_writew(void *opaque, uint32_t addr, uint32_t val) |
| { |
| IDEBus *bus = opaque; |
| IDEState *s = idebus_active_if(bus); |
| uint8_t *p; |
| |
| /* PIO data access allowed only when DRQ bit is set */ |
| if (!(s->status & DRQ_STAT)) |
| return; |
| |
| p = s->data_ptr; |
| *(uint16_t *)p = le16_to_cpu(val); |
| p += 2; |
| s->data_ptr = p; |
| if (p >= s->data_end) |
| s->end_transfer_func(s); |
| } |
| |
| uint32_t ide_data_readw(void *opaque, uint32_t addr) |
| { |
| IDEBus *bus = opaque; |
| IDEState *s = idebus_active_if(bus); |
| uint8_t *p; |
| int ret; |
| |
| /* PIO data access allowed only when DRQ bit is set */ |
| if (!(s->status & DRQ_STAT)) |
| return 0; |
| |
| p = s->data_ptr; |
| ret = cpu_to_le16(*(uint16_t *)p); |
| p += 2; |
| s->data_ptr = p; |
| if (p >= s->data_end) |
| s->end_transfer_func(s); |
| return ret; |
| } |
| |
| void ide_data_writel(void *opaque, uint32_t addr, uint32_t val) |
| { |
| IDEBus *bus = opaque; |
| IDEState *s = idebus_active_if(bus); |
| uint8_t *p; |
| |
| /* PIO data access allowed only when DRQ bit is set */ |
| if (!(s->status & DRQ_STAT)) |
| return; |
| |
| p = s->data_ptr; |
| *(uint32_t *)p = le32_to_cpu(val); |
| p += 4; |
| s->data_ptr = p; |
| if (p >= s->data_end) |
| s->end_transfer_func(s); |
| } |
| |
| uint32_t ide_data_readl(void *opaque, uint32_t addr) |
| { |
| IDEBus *bus = opaque; |
| IDEState *s = idebus_active_if(bus); |
| uint8_t *p; |
| int ret; |
| |
| /* PIO data access allowed only when DRQ bit is set */ |
| if (!(s->status & DRQ_STAT)) |
| return 0; |
| |
| p = s->data_ptr; |
| ret = cpu_to_le32(*(uint32_t *)p); |
| p += 4; |
| s->data_ptr = p; |
| if (p >= s->data_end) |
| s->end_transfer_func(s); |
| return ret; |
| } |
| |
| static void ide_dummy_transfer_stop(IDEState *s) |
| { |
| s->data_ptr = s->io_buffer; |
| s->data_end = s->io_buffer; |
| s->io_buffer[0] = 0xff; |
| s->io_buffer[1] = 0xff; |
| s->io_buffer[2] = 0xff; |
| s->io_buffer[3] = 0xff; |
| } |
| |
| void ide_reset(IDEState *s) |
| { |
| IDEBus *bus = s->bus; |
| |
| if (s->is_cf) |
| s->mult_sectors = 0; |
| else |
| s->mult_sectors = MAX_MULT_SECTORS; |
| bus->unit = s->unit; |
| s->select = 0xa0; |
| s->status = READY_STAT | SEEK_STAT; |
| ide_set_signature(s); |
| /* init the transfer handler so that 0xffff is returned on data |
| accesses */ |
| s->end_transfer_func = ide_dummy_transfer_stop; |
| ide_dummy_transfer_stop(s); |
| s->media_changed = 0; |
| } |
| |
| void ide_init_drive(IDEState *s, DriveInfo *dinfo) |
| { |
| int cylinders, heads, secs; |
| uint64_t nb_sectors; |
| |
| if (dinfo && dinfo->bdrv) { |
| s->bs = dinfo->bdrv; |
| bdrv_get_geometry(s->bs, &nb_sectors); |
| bdrv_guess_geometry(s->bs, &cylinders, &heads, &secs); |
| s->cylinders = cylinders; |
| s->heads = heads; |
| s->sectors = secs; |
| s->nb_sectors = nb_sectors; |
| /* The SMART values should be preserved across power cycles |
| but they aren't. */ |
| s->smart_enabled = 1; |
| s->smart_autosave = 1; |
| s->smart_errors = 0; |
| s->smart_selftest_count = 0; |
| if (bdrv_get_type_hint(s->bs) == BDRV_TYPE_CDROM) { |
| s->is_cdrom = 1; |
| bdrv_set_change_cb(s->bs, cdrom_change_cb, s); |
| } |
| strncpy(s->drive_serial_str, drive_get_serial(s->bs), |
| sizeof(s->drive_serial_str)); |
| } |
| if (strlen(s->drive_serial_str) == 0) |
| snprintf(s->drive_serial_str, sizeof(s->drive_serial_str), |
| "QM%05d", s->drive_serial); |
| ide_reset(s); |
| } |
| |
| void ide_init2(IDEBus *bus, DriveInfo *hd0, DriveInfo *hd1, |
| qemu_irq irq) |
| { |
| IDEState *s; |
| static int drive_serial = 1; |
| int i; |
| |
| for(i = 0; i < 2; i++) { |
| s = bus->ifs + i; |
| s->bus = bus; |
| s->unit = i; |
| s->drive_serial = drive_serial++; |
| s->io_buffer = qemu_blockalign(s->bs, IDE_DMA_BUF_SECTORS*512 + 4); |
| s->smart_selftest_data = qemu_blockalign(s->bs, 512); |
| s->sector_write_timer = qemu_new_timer(vm_clock, |
| ide_sector_write_timer_cb, s); |
| if (i == 0) |
| ide_init_drive(s, hd0); |
| if (i == 1) |
| ide_init_drive(s, hd1); |
| } |
| bus->irq = irq; |
| } |
| |
| void ide_init_ioport(IDEBus *bus, int iobase, int iobase2) |
| { |
| register_ioport_write(iobase, 8, 1, ide_ioport_write, bus); |
| register_ioport_read(iobase, 8, 1, ide_ioport_read, bus); |
| if (iobase2) { |
| register_ioport_read(iobase2, 1, 1, ide_status_read, bus); |
| register_ioport_write(iobase2, 1, 1, ide_cmd_write, bus); |
| } |
| |
| /* data ports */ |
| register_ioport_write(iobase, 2, 2, ide_data_writew, bus); |
| register_ioport_read(iobase, 2, 2, ide_data_readw, bus); |
| register_ioport_write(iobase, 4, 4, ide_data_writel, bus); |
| register_ioport_read(iobase, 4, 4, ide_data_readl, bus); |
| } |
| |
| /* save per IDE drive data */ |
| void ide_save(QEMUFile* f, IDEState *s) |
| { |
| qemu_put_be32(f, s->mult_sectors); |
| qemu_put_be32(f, s->identify_set); |
| if (s->identify_set) { |
| qemu_put_buffer(f, (const uint8_t *)s->identify_data, 512); |
| } |
| qemu_put_8s(f, &s->feature); |
| qemu_put_8s(f, &s->error); |
| qemu_put_be32s(f, &s->nsector); |
| qemu_put_8s(f, &s->sector); |
| qemu_put_8s(f, &s->lcyl); |
| qemu_put_8s(f, &s->hcyl); |
| qemu_put_8s(f, &s->hob_feature); |
| qemu_put_8s(f, &s->hob_nsector); |
| qemu_put_8s(f, &s->hob_sector); |
| qemu_put_8s(f, &s->hob_lcyl); |
| qemu_put_8s(f, &s->hob_hcyl); |
| qemu_put_8s(f, &s->select); |
| qemu_put_8s(f, &s->status); |
| qemu_put_8s(f, &s->lba48); |
| |
| qemu_put_8s(f, &s->sense_key); |
| qemu_put_8s(f, &s->asc); |
| qemu_put_8s(f, &s->cdrom_changed); |
| /* XXX: if a transfer is pending, we do not save it yet */ |
| } |
| |
| /* load per IDE drive data */ |
| void ide_load(QEMUFile* f, IDEState *s, int version_id) |
| { |
| s->mult_sectors=qemu_get_be32(f); |
| s->identify_set=qemu_get_be32(f); |
| if (s->identify_set) { |
| qemu_get_buffer(f, (uint8_t *)s->identify_data, 512); |
| } |
| qemu_get_8s(f, &s->feature); |
| qemu_get_8s(f, &s->error); |
| qemu_get_be32s(f, &s->nsector); |
| qemu_get_8s(f, &s->sector); |
| qemu_get_8s(f, &s->lcyl); |
| qemu_get_8s(f, &s->hcyl); |
| qemu_get_8s(f, &s->hob_feature); |
| qemu_get_8s(f, &s->hob_nsector); |
| qemu_get_8s(f, &s->hob_sector); |
| qemu_get_8s(f, &s->hob_lcyl); |
| qemu_get_8s(f, &s->hob_hcyl); |
| qemu_get_8s(f, &s->select); |
| qemu_get_8s(f, &s->status); |
| qemu_get_8s(f, &s->lba48); |
| |
| qemu_get_8s(f, &s->sense_key); |
| qemu_get_8s(f, &s->asc); |
| if (version_id == 3) { |
| qemu_get_8s(f, &s->cdrom_changed); |
| } else { |
| if (s->sense_key == SENSE_UNIT_ATTENTION && |
| s->asc == ASC_MEDIUM_MAY_HAVE_CHANGED) |
| s->cdrom_changed = 1; |
| } |
| /* XXX: if a transfer is pending, we do not save it yet */ |
| } |
| |
| void idebus_save(QEMUFile* f, IDEBus *bus) |
| { |
| qemu_put_8s(f, &bus->cmd); |
| qemu_put_8s(f, &bus->unit); |
| } |
| |
| void idebus_load(QEMUFile* f, IDEBus *bus, int version_id) |
| { |
| qemu_get_8s(f, &bus->cmd); |
| qemu_get_8s(f, &bus->unit); |
| } |
| |
| /***********************************************************/ |
| /* PCI IDE definitions */ |
| |
| static void ide_dma_start(IDEState *s, BlockDriverCompletionFunc *dma_cb) |
| { |
| BMDMAState *bm = s->bus->bmdma; |
| if(!bm) |
| return; |
| bm->unit = s->unit; |
| bm->dma_cb = dma_cb; |
| bm->cur_prd_last = 0; |
| bm->cur_prd_addr = 0; |
| bm->cur_prd_len = 0; |
| bm->sector_num = ide_get_sector(s); |
| bm->nsector = s->nsector; |
| if (bm->status & BM_STATUS_DMAING) { |
| bm->dma_cb(bm, 0); |
| } |
| } |
| |
| static void ide_dma_restart(IDEState *s) |
| { |
| BMDMAState *bm = s->bus->bmdma; |
| ide_set_sector(s, bm->sector_num); |
| s->io_buffer_index = 0; |
| s->io_buffer_size = 0; |
| s->nsector = bm->nsector; |
| bm->cur_addr = bm->addr; |
| bm->dma_cb = ide_write_dma_cb; |
| ide_dma_start(s, bm->dma_cb); |
| } |
| |
| void ide_dma_cancel(BMDMAState *bm) |
| { |
| if (bm->status & BM_STATUS_DMAING) { |
| bm->status &= ~BM_STATUS_DMAING; |
| /* cancel DMA request */ |
| bm->unit = -1; |
| bm->dma_cb = NULL; |
| if (bm->aiocb) { |
| #ifdef DEBUG_AIO |
| printf("aio_cancel\n"); |
| #endif |
| bdrv_aio_cancel(bm->aiocb); |
| bm->aiocb = NULL; |
| } |
| } |
| } |
| |