hw/arm/iotkit: Wire up MPC interrupt lines
The interrupt outputs from the MPC in the IoTKit and the expansion
MPCs in the board must be wired up to the security controller, and
also all ORed together to produce a single line to the NVIC.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180620132032.28865-8-peter.maydell@linaro.org
diff --git a/hw/arm/iotkit.c b/hw/arm/iotkit.c
index 160e40c..133d5bb 100644
--- a/hw/arm/iotkit.c
+++ b/hw/arm/iotkit.c
@@ -131,6 +131,18 @@
init_sysbus_child(obj, "apb-ppc1", &s->apb_ppc1, sizeof(s->apb_ppc1),
TYPE_TZ_PPC);
init_sysbus_child(obj, "mpc", &s->mpc, sizeof(s->mpc), TYPE_TZ_MPC);
+ object_initialize(&s->mpc_irq_orgate, sizeof(s->mpc_irq_orgate),
+ TYPE_OR_IRQ);
+ object_property_add_child(obj, "mpc-irq-orgate",
+ OBJECT(&s->mpc_irq_orgate), &error_abort);
+ for (i = 0; i < ARRAY_SIZE(s->mpc_irq_splitter); i++) {
+ char *name = g_strdup_printf("mpc-irq-splitter-%d", i);
+ SplitIRQ *splitter = &s->mpc_irq_splitter[i];
+
+ object_initialize(splitter, sizeof(*splitter), TYPE_SPLIT_IRQ);
+ object_property_add_child(obj, name, OBJECT(splitter), &error_abort);
+ g_free(name);
+ }
init_sysbus_child(obj, "timer0", &s->timer0, sizeof(s->timer0),
TYPE_CMSDK_APB_TIMER);
init_sysbus_child(obj, "timer1", &s->timer1, sizeof(s->timer1),
@@ -163,6 +175,12 @@
qemu_set_irq(s->exp_irqs[n], level);
}
+static void iotkit_mpcexp_status(void *opaque, int n, int level)
+{
+ IoTKit *s = IOTKIT(opaque);
+ qemu_set_irq(s->mpcexp_status_in[n], level);
+}
+
static void iotkit_realize(DeviceState *dev, Error **errp)
{
IoTKit *s = IOTKIT(dev);
@@ -328,6 +346,22 @@
sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->mpc),
0));
+ /* We must OR together lines from the MPC splitters to go to the NVIC */
+ object_property_set_int(OBJECT(&s->mpc_irq_orgate),
+ IOTS_NUM_EXP_MPC + IOTS_NUM_MPC, "num-lines", &err);
+ if (err) {
+ error_propagate(errp, err);
+ return;
+ }
+ object_property_set_bool(OBJECT(&s->mpc_irq_orgate), true,
+ "realized", &err);
+ if (err) {
+ error_propagate(errp, err);
+ return;
+ }
+ qdev_connect_gpio_out(DEVICE(&s->mpc_irq_orgate), 0,
+ qdev_get_gpio_in(DEVICE(&s->armv7m), 9));
+
/* Devices behind APB PPC0:
* 0x40000000: timer0
* 0x40001000: timer1
@@ -536,6 +570,46 @@
g_free(gpioname);
}
+ /* Wire up the splitters for the MPC IRQs */
+ for (i = 0; i < IOTS_NUM_EXP_MPC + IOTS_NUM_MPC; i++) {
+ SplitIRQ *splitter = &s->mpc_irq_splitter[i];
+ DeviceState *dev_splitter = DEVICE(splitter);
+
+ object_property_set_int(OBJECT(splitter), 2, "num-lines", &err);
+ if (err) {
+ error_propagate(errp, err);
+ return;
+ }
+ object_property_set_bool(OBJECT(splitter), true, "realized", &err);
+ if (err) {
+ error_propagate(errp, err);
+ return;
+ }
+
+ if (i < IOTS_NUM_EXP_MPC) {
+ /* Splitter input is from GPIO input line */
+ s->mpcexp_status_in[i] = qdev_get_gpio_in(dev_splitter, 0);
+ qdev_connect_gpio_out(dev_splitter, 0,
+ qdev_get_gpio_in_named(dev_secctl,
+ "mpcexp_status", i));
+ } else {
+ /* Splitter input is from our own MPC */
+ qdev_connect_gpio_out_named(DEVICE(&s->mpc), "irq", 0,
+ qdev_get_gpio_in(dev_splitter, 0));
+ qdev_connect_gpio_out(dev_splitter, 0,
+ qdev_get_gpio_in_named(dev_secctl,
+ "mpc_status", 0));
+ }
+
+ qdev_connect_gpio_out(dev_splitter, 1,
+ qdev_get_gpio_in(DEVICE(&s->mpc_irq_orgate), i));
+ }
+ /* Create GPIO inputs which will pass the line state for our
+ * mpcexp_irq inputs to the correct splitter devices.
+ */
+ qdev_init_gpio_in_named(dev, iotkit_mpcexp_status, "mpcexp_status",
+ IOTS_NUM_EXP_MPC);
+
iotkit_forward_sec_resp_cfg(s);
system_clock_scale = NANOSECONDS_PER_SECOND / s->mainclk_frq;
diff --git a/include/hw/arm/iotkit.h b/include/hw/arm/iotkit.h
index b21cf1a..2cddde5 100644
--- a/include/hw/arm/iotkit.h
+++ b/include/hw/arm/iotkit.h
@@ -42,6 +42,9 @@
* + named GPIO outputs ahb_ppcexp{0,1,2,3}_irq_enable
* + named GPIO outputs ahb_ppcexp{0,1,2,3}_irq_clear
* + named GPIO inputs ahb_ppcexp{0,1,2,3}_irq_status
+ * Controlling each of the 16 expansion MPCs which a system using the IoTKit
+ * might provide:
+ * + named GPIO inputs mpcexp_status[0..15]
*/
#ifndef IOTKIT_H
@@ -81,6 +84,8 @@
qemu_or_irq ppc_irq_orgate;
SplitIRQ sec_resp_splitter;
SplitIRQ ppc_irq_splitter[NUM_PPCS];
+ SplitIRQ mpc_irq_splitter[IOTS_NUM_EXP_MPC + IOTS_NUM_MPC];
+ qemu_or_irq mpc_irq_orgate;
UnimplementedDeviceState dualtimer;
UnimplementedDeviceState s32ktimer;
@@ -99,6 +104,7 @@
qemu_irq nsc_cfg_in;
qemu_irq irq_status_in[NUM_EXTERNAL_PPCS];
+ qemu_irq mpcexp_status_in[IOTS_NUM_EXP_MPC];
uint32_t nsccfg;
