| /* |
| * Emulation of Linux signals |
| * |
| * Copyright (c) 2003 Fabrice Bellard |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| #include "qemu/osdep.h" |
| #include "qemu.h" |
| #include "signal-common.h" |
| #include "linux-user/trace.h" |
| |
| # if defined(TARGET_ABI_MIPSO32) |
| struct target_sigcontext { |
| uint32_t sc_regmask; /* Unused */ |
| uint32_t sc_status; |
| uint64_t sc_pc; |
| uint64_t sc_regs[32]; |
| uint64_t sc_fpregs[32]; |
| uint32_t sc_ownedfp; /* Unused */ |
| uint32_t sc_fpc_csr; |
| uint32_t sc_fpc_eir; /* Unused */ |
| uint32_t sc_used_math; |
| uint32_t sc_dsp; /* dsp status, was sc_ssflags */ |
| uint32_t pad0; |
| uint64_t sc_mdhi; |
| uint64_t sc_mdlo; |
| target_ulong sc_hi1; /* Was sc_cause */ |
| target_ulong sc_lo1; /* Was sc_badvaddr */ |
| target_ulong sc_hi2; /* Was sc_sigset[4] */ |
| target_ulong sc_lo2; |
| target_ulong sc_hi3; |
| target_ulong sc_lo3; |
| }; |
| # else /* N32 || N64 */ |
| struct target_sigcontext { |
| uint64_t sc_regs[32]; |
| uint64_t sc_fpregs[32]; |
| uint64_t sc_mdhi; |
| uint64_t sc_hi1; |
| uint64_t sc_hi2; |
| uint64_t sc_hi3; |
| uint64_t sc_mdlo; |
| uint64_t sc_lo1; |
| uint64_t sc_lo2; |
| uint64_t sc_lo3; |
| uint64_t sc_pc; |
| uint32_t sc_fpc_csr; |
| uint32_t sc_used_math; |
| uint32_t sc_dsp; |
| uint32_t sc_reserved; |
| }; |
| # endif /* O32 */ |
| |
| struct sigframe { |
| uint32_t sf_ass[4]; /* argument save space for o32 */ |
| uint32_t sf_code[2]; /* signal trampoline */ |
| struct target_sigcontext sf_sc; |
| target_sigset_t sf_mask; |
| }; |
| |
| struct target_ucontext { |
| abi_ulong tuc_flags; |
| abi_ulong tuc_link; |
| target_stack_t tuc_stack; |
| struct target_sigcontext tuc_mcontext; |
| target_sigset_t tuc_sigmask; |
| }; |
| |
| struct target_rt_sigframe { |
| uint32_t rs_ass[4]; /* argument save space for o32 */ |
| uint32_t rs_code[2]; /* signal trampoline */ |
| struct target_siginfo rs_info; |
| struct target_ucontext rs_uc; |
| }; |
| |
| /* Install trampoline to jump back from signal handler */ |
| static inline int install_sigtramp(unsigned int *tramp, unsigned int syscall) |
| { |
| int err = 0; |
| |
| /* |
| * Set up the return code ... |
| * |
| * li v0, __NR__foo_sigreturn |
| * syscall |
| */ |
| |
| __put_user(0x24020000 + syscall, tramp + 0); |
| __put_user(0x0000000c , tramp + 1); |
| return err; |
| } |
| |
| static inline void setup_sigcontext(CPUMIPSState *regs, |
| struct target_sigcontext *sc) |
| { |
| int i; |
| |
| __put_user(exception_resume_pc(regs), &sc->sc_pc); |
| regs->hflags &= ~MIPS_HFLAG_BMASK; |
| |
| __put_user(0, &sc->sc_regs[0]); |
| for (i = 1; i < 32; ++i) { |
| __put_user(regs->active_tc.gpr[i], &sc->sc_regs[i]); |
| } |
| |
| __put_user(regs->active_tc.HI[0], &sc->sc_mdhi); |
| __put_user(regs->active_tc.LO[0], &sc->sc_mdlo); |
| |
| /* Rather than checking for dsp existence, always copy. The storage |
| would just be garbage otherwise. */ |
| __put_user(regs->active_tc.HI[1], &sc->sc_hi1); |
| __put_user(regs->active_tc.HI[2], &sc->sc_hi2); |
| __put_user(regs->active_tc.HI[3], &sc->sc_hi3); |
| __put_user(regs->active_tc.LO[1], &sc->sc_lo1); |
| __put_user(regs->active_tc.LO[2], &sc->sc_lo2); |
| __put_user(regs->active_tc.LO[3], &sc->sc_lo3); |
| { |
| uint32_t dsp = cpu_rddsp(0x3ff, regs); |
| __put_user(dsp, &sc->sc_dsp); |
| } |
| |
| __put_user(1, &sc->sc_used_math); |
| |
| for (i = 0; i < 32; ++i) { |
| __put_user(regs->active_fpu.fpr[i].d, &sc->sc_fpregs[i]); |
| } |
| } |
| |
| static inline void |
| restore_sigcontext(CPUMIPSState *regs, struct target_sigcontext *sc) |
| { |
| int i; |
| |
| __get_user(regs->CP0_EPC, &sc->sc_pc); |
| |
| __get_user(regs->active_tc.HI[0], &sc->sc_mdhi); |
| __get_user(regs->active_tc.LO[0], &sc->sc_mdlo); |
| |
| for (i = 1; i < 32; ++i) { |
| __get_user(regs->active_tc.gpr[i], &sc->sc_regs[i]); |
| } |
| |
| __get_user(regs->active_tc.HI[1], &sc->sc_hi1); |
| __get_user(regs->active_tc.HI[2], &sc->sc_hi2); |
| __get_user(regs->active_tc.HI[3], &sc->sc_hi3); |
| __get_user(regs->active_tc.LO[1], &sc->sc_lo1); |
| __get_user(regs->active_tc.LO[2], &sc->sc_lo2); |
| __get_user(regs->active_tc.LO[3], &sc->sc_lo3); |
| { |
| uint32_t dsp; |
| __get_user(dsp, &sc->sc_dsp); |
| cpu_wrdsp(dsp, 0x3ff, regs); |
| } |
| |
| for (i = 0; i < 32; ++i) { |
| __get_user(regs->active_fpu.fpr[i].d, &sc->sc_fpregs[i]); |
| } |
| } |
| |
| /* |
| * Determine which stack to use.. |
| */ |
| static inline abi_ulong |
| get_sigframe(struct target_sigaction *ka, CPUMIPSState *regs, size_t frame_size) |
| { |
| unsigned long sp; |
| |
| /* |
| * FPU emulator may have its own trampoline active just |
| * above the user stack, 16-bytes before the next lowest |
| * 16 byte boundary. Try to avoid trashing it. |
| */ |
| sp = target_sigsp(get_sp_from_cpustate(regs) - 32, ka); |
| |
| return (sp - frame_size) & ~7; |
| } |
| |
| static void mips_set_hflags_isa_mode_from_pc(CPUMIPSState *env) |
| { |
| if (env->insn_flags & (ASE_MIPS16 | ASE_MICROMIPS)) { |
| env->hflags &= ~MIPS_HFLAG_M16; |
| env->hflags |= (env->active_tc.PC & 1) << MIPS_HFLAG_M16_SHIFT; |
| env->active_tc.PC &= ~(target_ulong) 1; |
| } |
| } |
| |
| # if defined(TARGET_ABI_MIPSO32) |
| /* compare linux/arch/mips/kernel/signal.c:setup_frame() */ |
| void setup_frame(int sig, struct target_sigaction * ka, |
| target_sigset_t *set, CPUMIPSState *regs) |
| { |
| struct sigframe *frame; |
| abi_ulong frame_addr; |
| int i; |
| |
| frame_addr = get_sigframe(ka, regs, sizeof(*frame)); |
| trace_user_setup_frame(regs, frame_addr); |
| if (!lock_user_struct(VERIFY_WRITE, frame, frame_addr, 0)) { |
| goto give_sigsegv; |
| } |
| |
| install_sigtramp(frame->sf_code, TARGET_NR_sigreturn); |
| |
| setup_sigcontext(regs, &frame->sf_sc); |
| |
| for(i = 0; i < TARGET_NSIG_WORDS; i++) { |
| __put_user(set->sig[i], &frame->sf_mask.sig[i]); |
| } |
| |
| /* |
| * Arguments to signal handler: |
| * |
| * a0 = signal number |
| * a1 = 0 (should be cause) |
| * a2 = pointer to struct sigcontext |
| * |
| * $25 and PC point to the signal handler, $29 points to the |
| * struct sigframe. |
| */ |
| regs->active_tc.gpr[ 4] = sig; |
| regs->active_tc.gpr[ 5] = 0; |
| regs->active_tc.gpr[ 6] = frame_addr + offsetof(struct sigframe, sf_sc); |
| regs->active_tc.gpr[29] = frame_addr; |
| regs->active_tc.gpr[31] = frame_addr + offsetof(struct sigframe, sf_code); |
| /* The original kernel code sets CP0_EPC to the handler |
| * since it returns to userland using eret |
| * we cannot do this here, and we must set PC directly */ |
| regs->active_tc.PC = regs->active_tc.gpr[25] = ka->_sa_handler; |
| mips_set_hflags_isa_mode_from_pc(regs); |
| unlock_user_struct(frame, frame_addr, 1); |
| return; |
| |
| give_sigsegv: |
| force_sigsegv(sig); |
| } |
| |
| long do_sigreturn(CPUMIPSState *regs) |
| { |
| struct sigframe *frame; |
| abi_ulong frame_addr; |
| sigset_t blocked; |
| target_sigset_t target_set; |
| int i; |
| |
| frame_addr = regs->active_tc.gpr[29]; |
| trace_user_do_sigreturn(regs, frame_addr); |
| if (!lock_user_struct(VERIFY_READ, frame, frame_addr, 1)) |
| goto badframe; |
| |
| for(i = 0; i < TARGET_NSIG_WORDS; i++) { |
| __get_user(target_set.sig[i], &frame->sf_mask.sig[i]); |
| } |
| |
| target_to_host_sigset_internal(&blocked, &target_set); |
| set_sigmask(&blocked); |
| |
| restore_sigcontext(regs, &frame->sf_sc); |
| |
| #if 0 |
| /* |
| * Don't let your children do this ... |
| */ |
| __asm__ __volatile__( |
| "move\t$29, %0\n\t" |
| "j\tsyscall_exit" |
| :/* no outputs */ |
| :"r" (®s)); |
| /* Unreached */ |
| #endif |
| |
| regs->active_tc.PC = regs->CP0_EPC; |
| mips_set_hflags_isa_mode_from_pc(regs); |
| /* I am not sure this is right, but it seems to work |
| * maybe a problem with nested signals ? */ |
| regs->CP0_EPC = 0; |
| return -TARGET_QEMU_ESIGRETURN; |
| |
| badframe: |
| force_sig(TARGET_SIGSEGV); |
| return -TARGET_QEMU_ESIGRETURN; |
| } |
| # endif /* O32 */ |
| |
| void setup_rt_frame(int sig, struct target_sigaction *ka, |
| target_siginfo_t *info, |
| target_sigset_t *set, CPUMIPSState *env) |
| { |
| struct target_rt_sigframe *frame; |
| abi_ulong frame_addr; |
| int i; |
| |
| frame_addr = get_sigframe(ka, env, sizeof(*frame)); |
| trace_user_setup_rt_frame(env, frame_addr); |
| if (!lock_user_struct(VERIFY_WRITE, frame, frame_addr, 0)) { |
| goto give_sigsegv; |
| } |
| |
| install_sigtramp(frame->rs_code, TARGET_NR_rt_sigreturn); |
| |
| tswap_siginfo(&frame->rs_info, info); |
| |
| __put_user(0, &frame->rs_uc.tuc_flags); |
| __put_user(0, &frame->rs_uc.tuc_link); |
| target_save_altstack(&frame->rs_uc.tuc_stack, env); |
| |
| setup_sigcontext(env, &frame->rs_uc.tuc_mcontext); |
| |
| for(i = 0; i < TARGET_NSIG_WORDS; i++) { |
| __put_user(set->sig[i], &frame->rs_uc.tuc_sigmask.sig[i]); |
| } |
| |
| /* |
| * Arguments to signal handler: |
| * |
| * a0 = signal number |
| * a1 = pointer to siginfo_t |
| * a2 = pointer to ucontext_t |
| * |
| * $25 and PC point to the signal handler, $29 points to the |
| * struct sigframe. |
| */ |
| env->active_tc.gpr[ 4] = sig; |
| env->active_tc.gpr[ 5] = frame_addr |
| + offsetof(struct target_rt_sigframe, rs_info); |
| env->active_tc.gpr[ 6] = frame_addr |
| + offsetof(struct target_rt_sigframe, rs_uc); |
| env->active_tc.gpr[29] = frame_addr; |
| env->active_tc.gpr[31] = frame_addr |
| + offsetof(struct target_rt_sigframe, rs_code); |
| /* The original kernel code sets CP0_EPC to the handler |
| * since it returns to userland using eret |
| * we cannot do this here, and we must set PC directly */ |
| env->active_tc.PC = env->active_tc.gpr[25] = ka->_sa_handler; |
| mips_set_hflags_isa_mode_from_pc(env); |
| unlock_user_struct(frame, frame_addr, 1); |
| return; |
| |
| give_sigsegv: |
| unlock_user_struct(frame, frame_addr, 1); |
| force_sigsegv(sig); |
| } |
| |
| long do_rt_sigreturn(CPUMIPSState *env) |
| { |
| struct target_rt_sigframe *frame; |
| abi_ulong frame_addr; |
| sigset_t blocked; |
| |
| frame_addr = env->active_tc.gpr[29]; |
| trace_user_do_rt_sigreturn(env, frame_addr); |
| if (!lock_user_struct(VERIFY_READ, frame, frame_addr, 1)) { |
| goto badframe; |
| } |
| |
| target_to_host_sigset(&blocked, &frame->rs_uc.tuc_sigmask); |
| set_sigmask(&blocked); |
| |
| restore_sigcontext(env, &frame->rs_uc.tuc_mcontext); |
| |
| if (do_sigaltstack(frame_addr + |
| offsetof(struct target_rt_sigframe, rs_uc.tuc_stack), |
| 0, get_sp_from_cpustate(env)) == -EFAULT) |
| goto badframe; |
| |
| env->active_tc.PC = env->CP0_EPC; |
| mips_set_hflags_isa_mode_from_pc(env); |
| /* I am not sure this is right, but it seems to work |
| * maybe a problem with nested signals ? */ |
| env->CP0_EPC = 0; |
| return -TARGET_QEMU_ESIGRETURN; |
| |
| badframe: |
| force_sig(TARGET_SIGSEGV); |
| return -TARGET_QEMU_ESIGRETURN; |
| } |
