| /* |
| * QEMU PC System Emulator |
| * |
| * Copyright (c) 2003-2004 Fabrice Bellard |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| #include "qemu/osdep.h" |
| #include "hw/hw.h" |
| #include "hw/i386/pc.h" |
| #include "hw/char/serial.h" |
| #include "hw/i386/apic.h" |
| #include "hw/i386/topology.h" |
| #include "sysemu/cpus.h" |
| #include "hw/block/fdc.h" |
| #include "hw/ide.h" |
| #include "hw/pci/pci.h" |
| #include "hw/pci/pci_bus.h" |
| #include "hw/nvram/fw_cfg.h" |
| #include "hw/timer/hpet.h" |
| #include "hw/smbios/smbios.h" |
| #include "hw/loader.h" |
| #include "elf.h" |
| #include "multiboot.h" |
| #include "hw/timer/mc146818rtc.h" |
| #include "hw/timer/i8254.h" |
| #include "hw/audio/pcspk.h" |
| #include "hw/pci/msi.h" |
| #include "hw/sysbus.h" |
| #include "sysemu/sysemu.h" |
| #include "sysemu/numa.h" |
| #include "sysemu/kvm.h" |
| #include "sysemu/qtest.h" |
| #include "kvm_i386.h" |
| #include "hw/xen/xen.h" |
| #include "sysemu/block-backend.h" |
| #include "hw/block/block.h" |
| #include "ui/qemu-spice.h" |
| #include "exec/memory.h" |
| #include "exec/address-spaces.h" |
| #include "sysemu/arch_init.h" |
| #include "qemu/bitmap.h" |
| #include "qemu/config-file.h" |
| #include "qemu/error-report.h" |
| #include "hw/acpi/acpi.h" |
| #include "hw/acpi/cpu_hotplug.h" |
| #include "hw/boards.h" |
| #include "hw/pci/pci_host.h" |
| #include "acpi-build.h" |
| #include "hw/mem/pc-dimm.h" |
| #include "qapi/visitor.h" |
| #include "qapi-visit.h" |
| #include "qom/cpu.h" |
| #include "hw/nmi.h" |
| #include "hw/i386/intel_iommu.h" |
| |
| /* debug PC/ISA interrupts */ |
| //#define DEBUG_IRQ |
| |
| #ifdef DEBUG_IRQ |
| #define DPRINTF(fmt, ...) \ |
| do { printf("CPUIRQ: " fmt , ## __VA_ARGS__); } while (0) |
| #else |
| #define DPRINTF(fmt, ...) |
| #endif |
| |
| #define FW_CFG_ACPI_TABLES (FW_CFG_ARCH_LOCAL + 0) |
| #define FW_CFG_SMBIOS_ENTRIES (FW_CFG_ARCH_LOCAL + 1) |
| #define FW_CFG_IRQ0_OVERRIDE (FW_CFG_ARCH_LOCAL + 2) |
| #define FW_CFG_E820_TABLE (FW_CFG_ARCH_LOCAL + 3) |
| #define FW_CFG_HPET (FW_CFG_ARCH_LOCAL + 4) |
| |
| #define E820_NR_ENTRIES 16 |
| |
| struct e820_entry { |
| uint64_t address; |
| uint64_t length; |
| uint32_t type; |
| } QEMU_PACKED __attribute((__aligned__(4))); |
| |
| struct e820_table { |
| uint32_t count; |
| struct e820_entry entry[E820_NR_ENTRIES]; |
| } QEMU_PACKED __attribute((__aligned__(4))); |
| |
| static struct e820_table e820_reserve; |
| static struct e820_entry *e820_table; |
| static unsigned e820_entries; |
| struct hpet_fw_config hpet_cfg = {.count = UINT8_MAX}; |
| |
| void gsi_handler(void *opaque, int n, int level) |
| { |
| GSIState *s = opaque; |
| |
| DPRINTF("pc: %s GSI %d\n", level ? "raising" : "lowering", n); |
| if (n < ISA_NUM_IRQS) { |
| qemu_set_irq(s->i8259_irq[n], level); |
| } |
| qemu_set_irq(s->ioapic_irq[n], level); |
| } |
| |
| static void ioport80_write(void *opaque, hwaddr addr, uint64_t data, |
| unsigned size) |
| { |
| } |
| |
| static uint64_t ioport80_read(void *opaque, hwaddr addr, unsigned size) |
| { |
| return 0xffffffffffffffffULL; |
| } |
| |
| /* MSDOS compatibility mode FPU exception support */ |
| static qemu_irq ferr_irq; |
| |
| void pc_register_ferr_irq(qemu_irq irq) |
| { |
| ferr_irq = irq; |
| } |
| |
| /* XXX: add IGNNE support */ |
| void cpu_set_ferr(CPUX86State *s) |
| { |
| qemu_irq_raise(ferr_irq); |
| } |
| |
| static void ioportF0_write(void *opaque, hwaddr addr, uint64_t data, |
| unsigned size) |
| { |
| qemu_irq_lower(ferr_irq); |
| } |
| |
| static uint64_t ioportF0_read(void *opaque, hwaddr addr, unsigned size) |
| { |
| return 0xffffffffffffffffULL; |
| } |
| |
| /* TSC handling */ |
| uint64_t cpu_get_tsc(CPUX86State *env) |
| { |
| return cpu_get_ticks(); |
| } |
| |
| /* IRQ handling */ |
| int cpu_get_pic_interrupt(CPUX86State *env) |
| { |
| X86CPU *cpu = x86_env_get_cpu(env); |
| int intno; |
| |
| if (!kvm_irqchip_in_kernel()) { |
| intno = apic_get_interrupt(cpu->apic_state); |
| if (intno >= 0) { |
| return intno; |
| } |
| /* read the irq from the PIC */ |
| if (!apic_accept_pic_intr(cpu->apic_state)) { |
| return -1; |
| } |
| } |
| |
| intno = pic_read_irq(isa_pic); |
| return intno; |
| } |
| |
| static void pic_irq_request(void *opaque, int irq, int level) |
| { |
| CPUState *cs = first_cpu; |
| X86CPU *cpu = X86_CPU(cs); |
| |
| DPRINTF("pic_irqs: %s irq %d\n", level? "raise" : "lower", irq); |
| if (cpu->apic_state && !kvm_irqchip_in_kernel()) { |
| CPU_FOREACH(cs) { |
| cpu = X86_CPU(cs); |
| if (apic_accept_pic_intr(cpu->apic_state)) { |
| apic_deliver_pic_intr(cpu->apic_state, level); |
| } |
| } |
| } else { |
| if (level) { |
| cpu_interrupt(cs, CPU_INTERRUPT_HARD); |
| } else { |
| cpu_reset_interrupt(cs, CPU_INTERRUPT_HARD); |
| } |
| } |
| } |
| |
| /* PC cmos mappings */ |
| |
| #define REG_EQUIPMENT_BYTE 0x14 |
| |
| int cmos_get_fd_drive_type(FloppyDriveType fd0) |
| { |
| int val; |
| |
| switch (fd0) { |
| case FLOPPY_DRIVE_TYPE_144: |
| /* 1.44 Mb 3"5 drive */ |
| val = 4; |
| break; |
| case FLOPPY_DRIVE_TYPE_288: |
| /* 2.88 Mb 3"5 drive */ |
| val = 5; |
| break; |
| case FLOPPY_DRIVE_TYPE_120: |
| /* 1.2 Mb 5"5 drive */ |
| val = 2; |
| break; |
| case FLOPPY_DRIVE_TYPE_NONE: |
| default: |
| val = 0; |
| break; |
| } |
| return val; |
| } |
| |
| static void cmos_init_hd(ISADevice *s, int type_ofs, int info_ofs, |
| int16_t cylinders, int8_t heads, int8_t sectors) |
| { |
| rtc_set_memory(s, type_ofs, 47); |
| rtc_set_memory(s, info_ofs, cylinders); |
| rtc_set_memory(s, info_ofs + 1, cylinders >> 8); |
| rtc_set_memory(s, info_ofs + 2, heads); |
| rtc_set_memory(s, info_ofs + 3, 0xff); |
| rtc_set_memory(s, info_ofs + 4, 0xff); |
| rtc_set_memory(s, info_ofs + 5, 0xc0 | ((heads > 8) << 3)); |
| rtc_set_memory(s, info_ofs + 6, cylinders); |
| rtc_set_memory(s, info_ofs + 7, cylinders >> 8); |
| rtc_set_memory(s, info_ofs + 8, sectors); |
| } |
| |
| /* convert boot_device letter to something recognizable by the bios */ |
| static int boot_device2nibble(char boot_device) |
| { |
| switch(boot_device) { |
| case 'a': |
| case 'b': |
| return 0x01; /* floppy boot */ |
| case 'c': |
| return 0x02; /* hard drive boot */ |
| case 'd': |
| return 0x03; /* CD-ROM boot */ |
| case 'n': |
| return 0x04; /* Network boot */ |
| } |
| return 0; |
| } |
| |
| static void set_boot_dev(ISADevice *s, const char *boot_device, Error **errp) |
| { |
| #define PC_MAX_BOOT_DEVICES 3 |
| int nbds, bds[3] = { 0, }; |
| int i; |
| |
| nbds = strlen(boot_device); |
| if (nbds > PC_MAX_BOOT_DEVICES) { |
| error_setg(errp, "Too many boot devices for PC"); |
| return; |
| } |
| for (i = 0; i < nbds; i++) { |
| bds[i] = boot_device2nibble(boot_device[i]); |
| if (bds[i] == 0) { |
| error_setg(errp, "Invalid boot device for PC: '%c'", |
| boot_device[i]); |
| return; |
| } |
| } |
| rtc_set_memory(s, 0x3d, (bds[1] << 4) | bds[0]); |
| rtc_set_memory(s, 0x38, (bds[2] << 4) | (fd_bootchk ? 0x0 : 0x1)); |
| } |
| |
| static void pc_boot_set(void *opaque, const char *boot_device, Error **errp) |
| { |
| set_boot_dev(opaque, boot_device, errp); |
| } |
| |
| static void pc_cmos_init_floppy(ISADevice *rtc_state, ISADevice *floppy) |
| { |
| int val, nb, i; |
| FloppyDriveType fd_type[2] = { FLOPPY_DRIVE_TYPE_NONE, |
| FLOPPY_DRIVE_TYPE_NONE }; |
| |
| /* floppy type */ |
| if (floppy) { |
| for (i = 0; i < 2; i++) { |
| fd_type[i] = isa_fdc_get_drive_type(floppy, i); |
| } |
| } |
| val = (cmos_get_fd_drive_type(fd_type[0]) << 4) | |
| cmos_get_fd_drive_type(fd_type[1]); |
| rtc_set_memory(rtc_state, 0x10, val); |
| |
| val = rtc_get_memory(rtc_state, REG_EQUIPMENT_BYTE); |
| nb = 0; |
| if (fd_type[0] != FLOPPY_DRIVE_TYPE_NONE) { |
| nb++; |
| } |
| if (fd_type[1] != FLOPPY_DRIVE_TYPE_NONE) { |
| nb++; |
| } |
| switch (nb) { |
| case 0: |
| break; |
| case 1: |
| val |= 0x01; /* 1 drive, ready for boot */ |
| break; |
| case 2: |
| val |= 0x41; /* 2 drives, ready for boot */ |
| break; |
| } |
| rtc_set_memory(rtc_state, REG_EQUIPMENT_BYTE, val); |
| } |
| |
| typedef struct pc_cmos_init_late_arg { |
| ISADevice *rtc_state; |
| BusState *idebus[2]; |
| } pc_cmos_init_late_arg; |
| |
| typedef struct check_fdc_state { |
| ISADevice *floppy; |
| bool multiple; |
| } CheckFdcState; |
| |
| static int check_fdc(Object *obj, void *opaque) |
| { |
| CheckFdcState *state = opaque; |
| Object *fdc; |
| uint32_t iobase; |
| Error *local_err = NULL; |
| |
| fdc = object_dynamic_cast(obj, TYPE_ISA_FDC); |
| if (!fdc) { |
| return 0; |
| } |
| |
| iobase = object_property_get_int(obj, "iobase", &local_err); |
| if (local_err || iobase != 0x3f0) { |
| error_free(local_err); |
| return 0; |
| } |
| |
| if (state->floppy) { |
| state->multiple = true; |
| } else { |
| state->floppy = ISA_DEVICE(obj); |
| } |
| return 0; |
| } |
| |
| static const char * const fdc_container_path[] = { |
| "/unattached", "/peripheral", "/peripheral-anon" |
| }; |
| |
| /* |
| * Locate the FDC at IO address 0x3f0, in order to configure the CMOS registers |
| * and ACPI objects. |
| */ |
| ISADevice *pc_find_fdc0(void) |
| { |
| int i; |
| Object *container; |
| CheckFdcState state = { 0 }; |
| |
| for (i = 0; i < ARRAY_SIZE(fdc_container_path); i++) { |
| container = container_get(qdev_get_machine(), fdc_container_path[i]); |
| object_child_foreach(container, check_fdc, &state); |
| } |
| |
| if (state.multiple) { |
| error_report("warning: multiple floppy disk controllers with " |
| "iobase=0x3f0 have been found"); |
| error_printf("the one being picked for CMOS setup might not reflect " |
| "your intent\n"); |
| } |
| |
| return state.floppy; |
| } |
| |
| static void pc_cmos_init_late(void *opaque) |
| { |
| pc_cmos_init_late_arg *arg = opaque; |
| ISADevice *s = arg->rtc_state; |
| int16_t cylinders; |
| int8_t heads, sectors; |
| int val; |
| int i, trans; |
| |
| val = 0; |
| if (ide_get_geometry(arg->idebus[0], 0, |
| &cylinders, &heads, §ors) >= 0) { |
| cmos_init_hd(s, 0x19, 0x1b, cylinders, heads, sectors); |
| val |= 0xf0; |
| } |
| if (ide_get_geometry(arg->idebus[0], 1, |
| &cylinders, &heads, §ors) >= 0) { |
| cmos_init_hd(s, 0x1a, 0x24, cylinders, heads, sectors); |
| val |= 0x0f; |
| } |
| rtc_set_memory(s, 0x12, val); |
| |
| val = 0; |
| for (i = 0; i < 4; i++) { |
| /* NOTE: ide_get_geometry() returns the physical |
| geometry. It is always such that: 1 <= sects <= 63, 1 |
| <= heads <= 16, 1 <= cylinders <= 16383. The BIOS |
| geometry can be different if a translation is done. */ |
| if (ide_get_geometry(arg->idebus[i / 2], i % 2, |
| &cylinders, &heads, §ors) >= 0) { |
| trans = ide_get_bios_chs_trans(arg->idebus[i / 2], i % 2) - 1; |
| assert((trans & ~3) == 0); |
| val |= trans << (i * 2); |
| } |
| } |
| rtc_set_memory(s, 0x39, val); |
| |
| pc_cmos_init_floppy(s, pc_find_fdc0()); |
| |
| qemu_unregister_reset(pc_cmos_init_late, opaque); |
| } |
| |
| void pc_cmos_init(PCMachineState *pcms, |
| BusState *idebus0, BusState *idebus1, |
| ISADevice *s) |
| { |
| int val; |
| static pc_cmos_init_late_arg arg; |
| |
| /* various important CMOS locations needed by PC/Bochs bios */ |
| |
| /* memory size */ |
| /* base memory (first MiB) */ |
| val = MIN(pcms->below_4g_mem_size / 1024, 640); |
| rtc_set_memory(s, 0x15, val); |
| rtc_set_memory(s, 0x16, val >> 8); |
| /* extended memory (next 64MiB) */ |
| if (pcms->below_4g_mem_size > 1024 * 1024) { |
| val = (pcms->below_4g_mem_size - 1024 * 1024) / 1024; |
| } else { |
| val = 0; |
| } |
| if (val > 65535) |
| val = 65535; |
| rtc_set_memory(s, 0x17, val); |
| rtc_set_memory(s, 0x18, val >> 8); |
| rtc_set_memory(s, 0x30, val); |
| rtc_set_memory(s, 0x31, val >> 8); |
| /* memory between 16MiB and 4GiB */ |
| if (pcms->below_4g_mem_size > 16 * 1024 * 1024) { |
| val = (pcms->below_4g_mem_size - 16 * 1024 * 1024) / 65536; |
| } else { |
| val = 0; |
| } |
| if (val > 65535) |
| val = 65535; |
| rtc_set_memory(s, 0x34, val); |
| rtc_set_memory(s, 0x35, val >> 8); |
| /* memory above 4GiB */ |
| val = pcms->above_4g_mem_size / 65536; |
| rtc_set_memory(s, 0x5b, val); |
| rtc_set_memory(s, 0x5c, val >> 8); |
| rtc_set_memory(s, 0x5d, val >> 16); |
| |
| object_property_add_link(OBJECT(pcms), "rtc_state", |
| TYPE_ISA_DEVICE, |
| (Object **)&pcms->rtc, |
| object_property_allow_set_link, |
| OBJ_PROP_LINK_UNREF_ON_RELEASE, &error_abort); |
| object_property_set_link(OBJECT(pcms), OBJECT(s), |
| "rtc_state", &error_abort); |
| |
| set_boot_dev(s, MACHINE(pcms)->boot_order, &error_fatal); |
| |
| val = 0; |
| val |= 0x02; /* FPU is there */ |
| val |= 0x04; /* PS/2 mouse installed */ |
| rtc_set_memory(s, REG_EQUIPMENT_BYTE, val); |
| |
| /* hard drives and FDC */ |
| arg.rtc_state = s; |
| arg.idebus[0] = idebus0; |
| arg.idebus[1] = idebus1; |
| qemu_register_reset(pc_cmos_init_late, &arg); |
| } |
| |
| #define TYPE_PORT92 "port92" |
| #define PORT92(obj) OBJECT_CHECK(Port92State, (obj), TYPE_PORT92) |
| |
| /* port 92 stuff: could be split off */ |
| typedef struct Port92State { |
| ISADevice parent_obj; |
| |
| MemoryRegion io; |
| uint8_t outport; |
| qemu_irq a20_out; |
| } Port92State; |
| |
| static void port92_write(void *opaque, hwaddr addr, uint64_t val, |
| unsigned size) |
| { |
| Port92State *s = opaque; |
| int oldval = s->outport; |
| |
| DPRINTF("port92: write 0x%02" PRIx64 "\n", val); |
| s->outport = val; |
| qemu_set_irq(s->a20_out, (val >> 1) & 1); |
| if ((val & 1) && !(oldval & 1)) { |
| qemu_system_reset_request(); |
| } |
| } |
| |
| static uint64_t port92_read(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| Port92State *s = opaque; |
| uint32_t ret; |
| |
| ret = s->outport; |
| DPRINTF("port92: read 0x%02x\n", ret); |
| return ret; |
| } |
| |
| static void port92_init(ISADevice *dev, qemu_irq a20_out) |
| { |
| qdev_connect_gpio_out_named(DEVICE(dev), PORT92_A20_LINE, 0, a20_out); |
| } |
| |
| static const VMStateDescription vmstate_port92_isa = { |
| .name = "port92", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT8(outport, Port92State), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static void port92_reset(DeviceState *d) |
| { |
| Port92State *s = PORT92(d); |
| |
| s->outport &= ~1; |
| } |
| |
| static const MemoryRegionOps port92_ops = { |
| .read = port92_read, |
| .write = port92_write, |
| .impl = { |
| .min_access_size = 1, |
| .max_access_size = 1, |
| }, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| }; |
| |
| static void port92_initfn(Object *obj) |
| { |
| Port92State *s = PORT92(obj); |
| |
| memory_region_init_io(&s->io, OBJECT(s), &port92_ops, s, "port92", 1); |
| |
| s->outport = 0; |
| |
| qdev_init_gpio_out_named(DEVICE(obj), &s->a20_out, PORT92_A20_LINE, 1); |
| } |
| |
| static void port92_realizefn(DeviceState *dev, Error **errp) |
| { |
| ISADevice *isadev = ISA_DEVICE(dev); |
| Port92State *s = PORT92(dev); |
| |
| isa_register_ioport(isadev, &s->io, 0x92); |
| } |
| |
| static void port92_class_initfn(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| dc->realize = port92_realizefn; |
| dc->reset = port92_reset; |
| dc->vmsd = &vmstate_port92_isa; |
| /* |
| * Reason: unlike ordinary ISA devices, this one needs additional |
| * wiring: its A20 output line needs to be wired up by |
| * port92_init(). |
| */ |
| dc->cannot_instantiate_with_device_add_yet = true; |
| } |
| |
| static const TypeInfo port92_info = { |
| .name = TYPE_PORT92, |
| .parent = TYPE_ISA_DEVICE, |
| .instance_size = sizeof(Port92State), |
| .instance_init = port92_initfn, |
| .class_init = port92_class_initfn, |
| }; |
| |
| static void port92_register_types(void) |
| { |
| type_register_static(&port92_info); |
| } |
| |
| type_init(port92_register_types) |
| |
| static void handle_a20_line_change(void *opaque, int irq, int level) |
| { |
| X86CPU *cpu = opaque; |
| |
| /* XXX: send to all CPUs ? */ |
| /* XXX: add logic to handle multiple A20 line sources */ |
| x86_cpu_set_a20(cpu, level); |
| } |
| |
| int e820_add_entry(uint64_t address, uint64_t length, uint32_t type) |
| { |
| int index = le32_to_cpu(e820_reserve.count); |
| struct e820_entry *entry; |
| |
| if (type != E820_RAM) { |
| /* old FW_CFG_E820_TABLE entry -- reservations only */ |
| if (index >= E820_NR_ENTRIES) { |
| return -EBUSY; |
| } |
| entry = &e820_reserve.entry[index++]; |
| |
| entry->address = cpu_to_le64(address); |
| entry->length = cpu_to_le64(length); |
| entry->type = cpu_to_le32(type); |
| |
| e820_reserve.count = cpu_to_le32(index); |
| } |
| |
| /* new "etc/e820" file -- include ram too */ |
| e820_table = g_renew(struct e820_entry, e820_table, e820_entries + 1); |
| e820_table[e820_entries].address = cpu_to_le64(address); |
| e820_table[e820_entries].length = cpu_to_le64(length); |
| e820_table[e820_entries].type = cpu_to_le32(type); |
| e820_entries++; |
| |
| return e820_entries; |
| } |
| |
| int e820_get_num_entries(void) |
| { |
| return e820_entries; |
| } |
| |
| bool e820_get_entry(int idx, uint32_t type, uint64_t *address, uint64_t *length) |
| { |
| if (idx < e820_entries && e820_table[idx].type == cpu_to_le32(type)) { |
| *address = le64_to_cpu(e820_table[idx].address); |
| *length = le64_to_cpu(e820_table[idx].length); |
| return true; |
| } |
| return false; |
| } |
| |
| /* Enables contiguous-apic-ID mode, for compatibility */ |
| static bool compat_apic_id_mode; |
| |
| void enable_compat_apic_id_mode(void) |
| { |
| compat_apic_id_mode = true; |
| } |
| |
| /* Calculates initial APIC ID for a specific CPU index |
| * |
| * Currently we need to be able to calculate the APIC ID from the CPU index |
| * alone (without requiring a CPU object), as the QEMU<->Seabios interfaces have |
| * no concept of "CPU index", and the NUMA tables on fw_cfg need the APIC ID of |
| * all CPUs up to max_cpus. |
| */ |
| static uint32_t x86_cpu_apic_id_from_index(unsigned int cpu_index) |
| { |
| uint32_t correct_id; |
| static bool warned; |
| |
| correct_id = x86_apicid_from_cpu_idx(smp_cores, smp_threads, cpu_index); |
| if (compat_apic_id_mode) { |
| if (cpu_index != correct_id && !warned && !qtest_enabled()) { |
| error_report("APIC IDs set in compatibility mode, " |
| "CPU topology won't match the configuration"); |
| warned = true; |
| } |
| return cpu_index; |
| } else { |
| return correct_id; |
| } |
| } |
| |
| static void pc_build_smbios(FWCfgState *fw_cfg) |
| { |
| uint8_t *smbios_tables, *smbios_anchor; |
| size_t smbios_tables_len, smbios_anchor_len; |
| struct smbios_phys_mem_area *mem_array; |
| unsigned i, array_count; |
| |
| smbios_tables = smbios_get_table_legacy(&smbios_tables_len); |
| if (smbios_tables) { |
| fw_cfg_add_bytes(fw_cfg, FW_CFG_SMBIOS_ENTRIES, |
| smbios_tables, smbios_tables_len); |
| } |
| |
| /* build the array of physical mem area from e820 table */ |
| mem_array = g_malloc0(sizeof(*mem_array) * e820_get_num_entries()); |
| for (i = 0, array_count = 0; i < e820_get_num_entries(); i++) { |
| uint64_t addr, len; |
| |
| if (e820_get_entry(i, E820_RAM, &addr, &len)) { |
| mem_array[array_count].address = addr; |
| mem_array[array_count].length = len; |
| array_count++; |
| } |
| } |
| smbios_get_tables(mem_array, array_count, |
| &smbios_tables, &smbios_tables_len, |
| &smbios_anchor, &smbios_anchor_len); |
| g_free(mem_array); |
| |
| if (smbios_anchor) { |
| fw_cfg_add_file(fw_cfg, "etc/smbios/smbios-tables", |
| smbios_tables, smbios_tables_len); |
| fw_cfg_add_file(fw_cfg, "etc/smbios/smbios-anchor", |
| smbios_anchor, smbios_anchor_len); |
| } |
| } |
| |
| static FWCfgState *bochs_bios_init(AddressSpace *as, PCMachineState *pcms) |
| { |
| FWCfgState *fw_cfg; |
| uint64_t *numa_fw_cfg; |
| int i, j; |
| |
| fw_cfg = fw_cfg_init_io_dma(FW_CFG_IO_BASE, FW_CFG_IO_BASE + 4, as); |
| |
| /* FW_CFG_MAX_CPUS is a bit confusing/problematic on x86: |
| * |
| * For machine types prior to 1.8, SeaBIOS needs FW_CFG_MAX_CPUS for |
| * building MPTable, ACPI MADT, ACPI CPU hotplug and ACPI SRAT table, |
| * that tables are based on xAPIC ID and QEMU<->SeaBIOS interface |
| * for CPU hotplug also uses APIC ID and not "CPU index". |
| * This means that FW_CFG_MAX_CPUS is not the "maximum number of CPUs", |
| * but the "limit to the APIC ID values SeaBIOS may see". |
| * |
| * So for compatibility reasons with old BIOSes we are stuck with |
| * "etc/max-cpus" actually being apic_id_limit |
| */ |
| fw_cfg_add_i16(fw_cfg, FW_CFG_MAX_CPUS, (uint16_t)pcms->apic_id_limit); |
| fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size); |
| fw_cfg_add_bytes(fw_cfg, FW_CFG_ACPI_TABLES, |
| acpi_tables, acpi_tables_len); |
| fw_cfg_add_i32(fw_cfg, FW_CFG_IRQ0_OVERRIDE, kvm_allows_irq0_override()); |
| |
| fw_cfg_add_bytes(fw_cfg, FW_CFG_E820_TABLE, |
| &e820_reserve, sizeof(e820_reserve)); |
| fw_cfg_add_file(fw_cfg, "etc/e820", e820_table, |
| sizeof(struct e820_entry) * e820_entries); |
| |
| fw_cfg_add_bytes(fw_cfg, FW_CFG_HPET, &hpet_cfg, sizeof(hpet_cfg)); |
| /* allocate memory for the NUMA channel: one (64bit) word for the number |
| * of nodes, one word for each VCPU->node and one word for each node to |
| * hold the amount of memory. |
| */ |
| numa_fw_cfg = g_new0(uint64_t, 1 + pcms->apic_id_limit + nb_numa_nodes); |
| numa_fw_cfg[0] = cpu_to_le64(nb_numa_nodes); |
| for (i = 0; i < max_cpus; i++) { |
| unsigned int apic_id = x86_cpu_apic_id_from_index(i); |
| assert(apic_id < pcms->apic_id_limit); |
| j = numa_get_node_for_cpu(i); |
| if (j < nb_numa_nodes) { |
| numa_fw_cfg[apic_id + 1] = cpu_to_le64(j); |
| } |
| } |
| for (i = 0; i < nb_numa_nodes; i++) { |
| numa_fw_cfg[pcms->apic_id_limit + 1 + i] = |
| cpu_to_le64(numa_info[i].node_mem); |
| } |
| fw_cfg_add_bytes(fw_cfg, FW_CFG_NUMA, numa_fw_cfg, |
| (1 + pcms->apic_id_limit + nb_numa_nodes) * |
| sizeof(*numa_fw_cfg)); |
| |
| return fw_cfg; |
| } |
| |
| static long get_file_size(FILE *f) |
| { |
| long where, size; |
| |
| /* XXX: on Unix systems, using fstat() probably makes more sense */ |
| |
| where = ftell(f); |
| fseek(f, 0, SEEK_END); |
| size = ftell(f); |
| fseek(f, where, SEEK_SET); |
| |
| return size; |
| } |
| |
| /* setup_data types */ |
| #define SETUP_NONE 0 |
| #define SETUP_E820_EXT 1 |
| #define SETUP_DTB 2 |
| #define SETUP_PCI 3 |
| #define SETUP_EFI 4 |
| |
| struct setup_data { |
| uint64_t next; |
| uint32_t type; |
| uint32_t len; |
| uint8_t data[0]; |
| } __attribute__((packed)); |
| |
| static void load_linux(PCMachineState *pcms, |
| FWCfgState *fw_cfg) |
| { |
| uint16_t protocol; |
| int setup_size, kernel_size, initrd_size = 0, cmdline_size; |
| int dtb_size, setup_data_offset; |
| uint32_t initrd_max; |
| uint8_t header[8192], *setup, *kernel, *initrd_data; |
| hwaddr real_addr, prot_addr, cmdline_addr, initrd_addr = 0; |
| FILE *f; |
| char *vmode; |
| MachineState *machine = MACHINE(pcms); |
| PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms); |
| struct setup_data *setup_data; |
| const char *kernel_filename = machine->kernel_filename; |
| const char *initrd_filename = machine->initrd_filename; |
| const char *dtb_filename = machine->dtb; |
| const char *kernel_cmdline = machine->kernel_cmdline; |
| |
| /* Align to 16 bytes as a paranoia measure */ |
| cmdline_size = (strlen(kernel_cmdline)+16) & ~15; |
| |
| /* load the kernel header */ |
| f = fopen(kernel_filename, "rb"); |
| if (!f || !(kernel_size = get_file_size(f)) || |
| fread(header, 1, MIN(ARRAY_SIZE(header), kernel_size), f) != |
| MIN(ARRAY_SIZE(header), kernel_size)) { |
| fprintf(stderr, "qemu: could not load kernel '%s': %s\n", |
| kernel_filename, strerror(errno)); |
| exit(1); |
| } |
| |
| /* kernel protocol version */ |
| #if 0 |
| fprintf(stderr, "header magic: %#x\n", ldl_p(header+0x202)); |
| #endif |
| if (ldl_p(header+0x202) == 0x53726448) { |
| protocol = lduw_p(header+0x206); |
| } else { |
| /* This looks like a multiboot kernel. If it is, let's stop |
| treating it like a Linux kernel. */ |
| if (load_multiboot(fw_cfg, f, kernel_filename, initrd_filename, |
| kernel_cmdline, kernel_size, header)) { |
| return; |
| } |
| protocol = 0; |
| } |
| |
| if (protocol < 0x200 || !(header[0x211] & 0x01)) { |
| /* Low kernel */ |
| real_addr = 0x90000; |
| cmdline_addr = 0x9a000 - cmdline_size; |
| prot_addr = 0x10000; |
| } else if (protocol < 0x202) { |
| /* High but ancient kernel */ |
| real_addr = 0x90000; |
| cmdline_addr = 0x9a000 - cmdline_size; |
| prot_addr = 0x100000; |
| } else { |
| /* High and recent kernel */ |
| real_addr = 0x10000; |
| cmdline_addr = 0x20000; |
| prot_addr = 0x100000; |
| } |
| |
| #if 0 |
| fprintf(stderr, |
| "qemu: real_addr = 0x" TARGET_FMT_plx "\n" |
| "qemu: cmdline_addr = 0x" TARGET_FMT_plx "\n" |
| "qemu: prot_addr = 0x" TARGET_FMT_plx "\n", |
| real_addr, |
| cmdline_addr, |
| prot_addr); |
| #endif |
| |
| /* highest address for loading the initrd */ |
| if (protocol >= 0x203) { |
| initrd_max = ldl_p(header+0x22c); |
| } else { |
| initrd_max = 0x37ffffff; |
| } |
| |
| if (initrd_max >= pcms->below_4g_mem_size - pcmc->acpi_data_size) { |
| initrd_max = pcms->below_4g_mem_size - pcmc->acpi_data_size - 1; |
| } |
| |
| fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_ADDR, cmdline_addr); |
| fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_SIZE, strlen(kernel_cmdline)+1); |
| fw_cfg_add_string(fw_cfg, FW_CFG_CMDLINE_DATA, kernel_cmdline); |
| |
| if (protocol >= 0x202) { |
| stl_p(header+0x228, cmdline_addr); |
| } else { |
| stw_p(header+0x20, 0xA33F); |
| stw_p(header+0x22, cmdline_addr-real_addr); |
| } |
| |
| /* handle vga= parameter */ |
| vmode = strstr(kernel_cmdline, "vga="); |
| if (vmode) { |
| unsigned int video_mode; |
| /* skip "vga=" */ |
| vmode += 4; |
| if (!strncmp(vmode, "normal", 6)) { |
| video_mode = 0xffff; |
| } else if (!strncmp(vmode, "ext", 3)) { |
| video_mode = 0xfffe; |
| } else if (!strncmp(vmode, "ask", 3)) { |
| video_mode = 0xfffd; |
| } else { |
| video_mode = strtol(vmode, NULL, 0); |
| } |
| stw_p(header+0x1fa, video_mode); |
| } |
| |
| /* loader type */ |
| /* High nybble = B reserved for QEMU; low nybble is revision number. |
| If this code is substantially changed, you may want to consider |
| incrementing the revision. */ |
| if (protocol >= 0x200) { |
| header[0x210] = 0xB0; |
| } |
| /* heap */ |
| if (protocol >= 0x201) { |
| header[0x211] |= 0x80; /* CAN_USE_HEAP */ |
| stw_p(header+0x224, cmdline_addr-real_addr-0x200); |
| } |
| |
| /* load initrd */ |
| if (initrd_filename) { |
| if (protocol < 0x200) { |
| fprintf(stderr, "qemu: linux kernel too old to load a ram disk\n"); |
| exit(1); |
| } |
| |
| initrd_size = get_image_size(initrd_filename); |
| if (initrd_size < 0) { |
| fprintf(stderr, "qemu: error reading initrd %s: %s\n", |
| initrd_filename, strerror(errno)); |
| exit(1); |
| } |
| |
| initrd_addr = (initrd_max-initrd_size) & ~4095; |
| |
| initrd_data = g_malloc(initrd_size); |
| load_image(initrd_filename, initrd_data); |
| |
| fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_ADDR, initrd_addr); |
| fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_SIZE, initrd_size); |
| fw_cfg_add_bytes(fw_cfg, FW_CFG_INITRD_DATA, initrd_data, initrd_size); |
| |
| stl_p(header+0x218, initrd_addr); |
| stl_p(header+0x21c, initrd_size); |
| } |
| |
| /* load kernel and setup */ |
| setup_size = header[0x1f1]; |
| if (setup_size == 0) { |
| setup_size = 4; |
| } |
| setup_size = (setup_size+1)*512; |
| if (setup_size > kernel_size) { |
| fprintf(stderr, "qemu: invalid kernel header\n"); |
| exit(1); |
| } |
| kernel_size -= setup_size; |
| |
| setup = g_malloc(setup_size); |
| kernel = g_malloc(kernel_size); |
| fseek(f, 0, SEEK_SET); |
| if (fread(setup, 1, setup_size, f) != setup_size) { |
| fprintf(stderr, "fread() failed\n"); |
| exit(1); |
| } |
| if (fread(kernel, 1, kernel_size, f) != kernel_size) { |
| fprintf(stderr, "fread() failed\n"); |
| exit(1); |
| } |
| fclose(f); |
| |
| /* append dtb to kernel */ |
| if (dtb_filename) { |
| if (protocol < 0x209) { |
| fprintf(stderr, "qemu: Linux kernel too old to load a dtb\n"); |
| exit(1); |
| } |
| |
| dtb_size = get_image_size(dtb_filename); |
| if (dtb_size <= 0) { |
| fprintf(stderr, "qemu: error reading dtb %s: %s\n", |
| dtb_filename, strerror(errno)); |
| exit(1); |
| } |
| |
| setup_data_offset = QEMU_ALIGN_UP(kernel_size, 16); |
| kernel_size = setup_data_offset + sizeof(struct setup_data) + dtb_size; |
| kernel = g_realloc(kernel, kernel_size); |
| |
| stq_p(header+0x250, prot_addr + setup_data_offset); |
| |
| setup_data = (struct setup_data *)(kernel + setup_data_offset); |
| setup_data->next = 0; |
| setup_data->type = cpu_to_le32(SETUP_DTB); |
| setup_data->len = cpu_to_le32(dtb_size); |
| |
| load_image_size(dtb_filename, setup_data->data, dtb_size); |
| } |
| |
| memcpy(setup, header, MIN(sizeof(header), setup_size)); |
| |
| fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_ADDR, prot_addr); |
| fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_SIZE, kernel_size); |
| fw_cfg_add_bytes(fw_cfg, FW_CFG_KERNEL_DATA, kernel, kernel_size); |
| |
| fw_cfg_add_i32(fw_cfg, FW_CFG_SETUP_ADDR, real_addr); |
| fw_cfg_add_i32(fw_cfg, FW_CFG_SETUP_SIZE, setup_size); |
| fw_cfg_add_bytes(fw_cfg, FW_CFG_SETUP_DATA, setup, setup_size); |
| |
| if (fw_cfg_dma_enabled(fw_cfg)) { |
| option_rom[nb_option_roms].name = "linuxboot_dma.bin"; |
| option_rom[nb_option_roms].bootindex = 0; |
| } else { |
| option_rom[nb_option_roms].name = "linuxboot.bin"; |
| option_rom[nb_option_roms].bootindex = 0; |
| } |
| nb_option_roms++; |
| } |
| |
| #define NE2000_NB_MAX 6 |
| |
| static const int ne2000_io[NE2000_NB_MAX] = { 0x300, 0x320, 0x340, 0x360, |
| 0x280, 0x380 }; |
| static const int ne2000_irq[NE2000_NB_MAX] = { 9, 10, 11, 3, 4, 5 }; |
| |
| void pc_init_ne2k_isa(ISABus *bus, NICInfo *nd) |
| { |
| static int nb_ne2k = 0; |
| |
| if (nb_ne2k == NE2000_NB_MAX) |
| return; |
| isa_ne2000_init(bus, ne2000_io[nb_ne2k], |
| ne2000_irq[nb_ne2k], nd); |
| nb_ne2k++; |
| } |
| |
| DeviceState *cpu_get_current_apic(void) |
| { |
| if (current_cpu) { |
| X86CPU *cpu = X86_CPU(current_cpu); |
| return cpu->apic_state; |
| } else { |
| return NULL; |
| } |
| } |
| |
| void pc_acpi_smi_interrupt(void *opaque, int irq, int level) |
| { |
| X86CPU *cpu = opaque; |
| |
| if (level) { |
| cpu_interrupt(CPU(cpu), CPU_INTERRUPT_SMI); |
| } |
| } |
| |
| static X86CPU *pc_new_cpu(const char *typename, int64_t apic_id, |
| Error **errp) |
| { |
| X86CPU *cpu = NULL; |
| Error *local_err = NULL; |
| |
| cpu = X86_CPU(object_new(typename)); |
| |
| object_property_set_int(OBJECT(cpu), apic_id, "apic-id", &local_err); |
| object_property_set_bool(OBJECT(cpu), true, "realized", &local_err); |
| |
| if (local_err) { |
| error_propagate(errp, local_err); |
| object_unref(OBJECT(cpu)); |
| cpu = NULL; |
| } |
| return cpu; |
| } |
| |
| void pc_hot_add_cpu(const int64_t id, Error **errp) |
| { |
| X86CPU *cpu; |
| ObjectClass *oc; |
| PCMachineState *pcms = PC_MACHINE(qdev_get_machine()); |
| int64_t apic_id = x86_cpu_apic_id_from_index(id); |
| Error *local_err = NULL; |
| |
| if (id < 0) { |
| error_setg(errp, "Invalid CPU id: %" PRIi64, id); |
| return; |
| } |
| |
| if (apic_id >= ACPI_CPU_HOTPLUG_ID_LIMIT) { |
| error_setg(errp, "Unable to add CPU: %" PRIi64 |
| ", resulting APIC ID (%" PRIi64 ") is too large", |
| id, apic_id); |
| return; |
| } |
| |
| assert(pcms->possible_cpus->cpus[0].cpu); /* BSP is always present */ |
| oc = OBJECT_CLASS(CPU_GET_CLASS(pcms->possible_cpus->cpus[0].cpu)); |
| cpu = pc_new_cpu(object_class_get_name(oc), apic_id, &local_err); |
| if (local_err) { |
| error_propagate(errp, local_err); |
| return; |
| } |
| object_unref(OBJECT(cpu)); |
| } |
| |
| void pc_cpus_init(PCMachineState *pcms) |
| { |
| int i; |
| CPUClass *cc; |
| ObjectClass *oc; |
| const char *typename; |
| gchar **model_pieces; |
| X86CPU *cpu = NULL; |
| MachineState *machine = MACHINE(pcms); |
| |
| /* init CPUs */ |
| if (machine->cpu_model == NULL) { |
| #ifdef TARGET_X86_64 |
| machine->cpu_model = "qemu64"; |
| #else |
| machine->cpu_model = "qemu32"; |
| #endif |
| } |
| |
| model_pieces = g_strsplit(machine->cpu_model, ",", 2); |
| if (!model_pieces[0]) { |
| error_report("Invalid/empty CPU model name"); |
| exit(1); |
| } |
| |
| oc = cpu_class_by_name(TYPE_X86_CPU, model_pieces[0]); |
| if (oc == NULL) { |
| error_report("Unable to find CPU definition: %s", model_pieces[0]); |
| exit(1); |
| } |
| typename = object_class_get_name(oc); |
| cc = CPU_CLASS(oc); |
| cc->parse_features(typename, model_pieces[1], &error_fatal); |
| g_strfreev(model_pieces); |
| |
| /* Calculates the limit to CPU APIC ID values |
| * |
| * Limit for the APIC ID value, so that all |
| * CPU APIC IDs are < pcms->apic_id_limit. |
| * |
| * This is used for FW_CFG_MAX_CPUS. See comments on bochs_bios_init(). |
| */ |
| pcms->apic_id_limit = x86_cpu_apic_id_from_index(max_cpus - 1) + 1; |
| pcms->possible_cpus = g_malloc0(sizeof(CPUArchIdList) + |
| sizeof(CPUArchId) * max_cpus); |
| for (i = 0; i < max_cpus; i++) { |
| pcms->possible_cpus->cpus[i].arch_id = x86_cpu_apic_id_from_index(i); |
| pcms->possible_cpus->len++; |
| if (i < smp_cpus) { |
| cpu = pc_new_cpu(typename, x86_cpu_apic_id_from_index(i), |
| &error_fatal); |
| object_unref(OBJECT(cpu)); |
| } |
| } |
| |
| /* tell smbios about cpuid version and features */ |
| smbios_set_cpuid(cpu->env.cpuid_version, cpu->env.features[FEAT_1_EDX]); |
| } |
| |
| static void pc_build_feature_control_file(PCMachineState *pcms) |
| { |
| X86CPU *cpu = X86_CPU(pcms->possible_cpus->cpus[0].cpu); |
| CPUX86State *env = &cpu->env; |
| uint32_t unused, ecx, edx; |
| uint64_t feature_control_bits = 0; |
| uint64_t *val; |
| |
| cpu_x86_cpuid(env, 1, 0, &unused, &unused, &ecx, &edx); |
| if (ecx & CPUID_EXT_VMX) { |
| feature_control_bits |= FEATURE_CONTROL_VMXON_ENABLED_OUTSIDE_SMX; |
| } |
| |
| if ((edx & (CPUID_EXT2_MCE | CPUID_EXT2_MCA)) == |
| (CPUID_EXT2_MCE | CPUID_EXT2_MCA) && |
| (env->mcg_cap & MCG_LMCE_P)) { |
| feature_control_bits |= FEATURE_CONTROL_LMCE; |
| } |
| |
| if (!feature_control_bits) { |
| return; |
| } |
| |
| val = g_malloc(sizeof(*val)); |
| *val = cpu_to_le64(feature_control_bits | FEATURE_CONTROL_LOCKED); |
| fw_cfg_add_file(pcms->fw_cfg, "etc/msr_feature_control", val, sizeof(*val)); |
| } |
| |
| static void rtc_set_cpus_count(ISADevice *rtc, uint16_t cpus_count) |
| { |
| if (cpus_count > 0xff) { |
| /* If the number of CPUs can't be represented in 8 bits, the |
| * BIOS must use "etc/boot-cpus". Set RTC field to 0 just |
| * to make old BIOSes fail more predictably. |
| */ |
| rtc_set_memory(rtc, 0x5f, 0); |
| } else { |
| rtc_set_memory(rtc, 0x5f, cpus_count - 1); |
| } |
| } |
| |
| static |
| void pc_machine_done(Notifier *notifier, void *data) |
| { |
| PCMachineState *pcms = container_of(notifier, |
| PCMachineState, machine_done); |
| PCIBus *bus = pcms->bus; |
| |
| /* set the number of CPUs */ |
| rtc_set_cpus_count(pcms->rtc, le16_to_cpu(pcms->boot_cpus_le)); |
| |
| if (bus) { |
| int extra_hosts = 0; |
| |
| QLIST_FOREACH(bus, &bus->child, sibling) { |
| /* look for expander root buses */ |
| if (pci_bus_is_root(bus)) { |
| extra_hosts++; |
| } |
| } |
| if (extra_hosts && pcms->fw_cfg) { |
| uint64_t *val = g_malloc(sizeof(*val)); |
| *val = cpu_to_le64(extra_hosts); |
| fw_cfg_add_file(pcms->fw_cfg, |
| "etc/extra-pci-roots", val, sizeof(*val)); |
| } |
| } |
| |
| acpi_setup(); |
| if (pcms->fw_cfg) { |
| MachineClass *mc = MACHINE_GET_CLASS(pcms); |
| |
| pc_build_smbios(pcms->fw_cfg); |
| pc_build_feature_control_file(pcms); |
| |
| if (mc->max_cpus > 255) { |
| fw_cfg_add_file(pcms->fw_cfg, "etc/boot-cpus", &pcms->boot_cpus_le, |
| sizeof(pcms->boot_cpus_le)); |
| } |
| } |
| |
| if (pcms->apic_id_limit > 255) { |
| IntelIOMMUState *iommu = INTEL_IOMMU_DEVICE(x86_iommu_get_default()); |
| |
| if (!iommu || !iommu->x86_iommu.intr_supported || |
| iommu->intr_eim != ON_OFF_AUTO_ON) { |
| error_report("current -smp configuration requires " |
| "Extended Interrupt Mode enabled. " |
| "You can add an IOMMU using: " |
| "-device intel-iommu,intremap=on,eim=on"); |
| exit(EXIT_FAILURE); |
| } |
| } |
| } |
| |
| void pc_guest_info_init(PCMachineState *pcms) |
| { |
| int i; |
| |
| pcms->apic_xrupt_override = kvm_allows_irq0_override(); |
| pcms->numa_nodes = nb_numa_nodes; |
| pcms->node_mem = g_malloc0(pcms->numa_nodes * |
| sizeof *pcms->node_mem); |
| for (i = 0; i < nb_numa_nodes; i++) { |
| pcms->node_mem[i] = numa_info[i].node_mem; |
| } |
| |
| pcms->machine_done.notify = pc_machine_done; |
| qemu_add_machine_init_done_notifier(&pcms->machine_done); |
| } |
| |
| /* setup pci memory address space mapping into system address space */ |
| void pc_pci_as_mapping_init(Object *owner, MemoryRegion *system_memory, |
| MemoryRegion *pci_address_space) |
| { |
| /* Set to lower priority than RAM */ |
| memory_region_add_subregion_overlap(system_memory, 0x0, |
| pci_address_space, -1); |
| } |
| |
| void pc_acpi_init(const char *default_dsdt) |
| { |
| char *filename; |
| |
| if (acpi_tables != NULL) { |
| /* manually set via -acpitable, leave it alone */ |
| return; |
| } |
| |
| filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, default_dsdt); |
| if (filename == NULL) { |
| fprintf(stderr, "WARNING: failed to find %s\n", default_dsdt); |
| } else { |
| QemuOpts *opts = qemu_opts_create(qemu_find_opts("acpi"), NULL, 0, |
| &error_abort); |
| Error *err = NULL; |
| |
| qemu_opt_set(opts, "file", filename, &error_abort); |
| |
| acpi_table_add_builtin(opts, &err); |
| if (err) { |
| error_reportf_err(err, "WARNING: failed to load %s: ", |
| filename); |
| } |
| g_free(filename); |
| } |
| } |
| |
| void xen_load_linux(PCMachineState *pcms) |
| { |
| int i; |
| FWCfgState *fw_cfg; |
| |
| assert(MACHINE(pcms)->kernel_filename != NULL); |
| |
| fw_cfg = fw_cfg_init_io(FW_CFG_IO_BASE); |
| rom_set_fw(fw_cfg); |
| |
| load_linux(pcms, fw_cfg); |
| for (i = 0; i < nb_option_roms; i++) { |
| assert(!strcmp(option_rom[i].name, "linuxboot.bin") || |
| !strcmp(option_rom[i].name, "linuxboot_dma.bin") || |
| !strcmp(option_rom[i].name, "multiboot.bin")); |
| rom_add_option(option_rom[i].name, option_rom[i].bootindex); |
| } |
| pcms->fw_cfg = fw_cfg; |
| } |
| |
| void pc_memory_init(PCMachineState *pcms, |
| MemoryRegion *system_memory, |
| MemoryRegion *rom_memory, |
| MemoryRegion **ram_memory) |
| { |
| int linux_boot, i; |
| MemoryRegion *ram, *option_rom_mr; |
| MemoryRegion *ram_below_4g, *ram_above_4g; |
| FWCfgState *fw_cfg; |
| MachineState *machine = MACHINE(pcms); |
| PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms); |
| |
| assert(machine->ram_size == pcms->below_4g_mem_size + |
| pcms->above_4g_mem_size); |
| |
| linux_boot = (machine->kernel_filename != NULL); |
| |
| /* Allocate RAM. We allocate it as a single memory region and use |
| * aliases to address portions of it, mostly for backwards compatibility |
| * with older qemus that used qemu_ram_alloc(). |
| */ |
| ram = g_malloc(sizeof(*ram)); |
| memory_region_allocate_system_memory(ram, NULL, "pc.ram", |
| machine->ram_size); |
| *ram_memory = ram; |
| ram_below_4g = g_malloc(sizeof(*ram_below_4g)); |
| memory_region_init_alias(ram_below_4g, NULL, "ram-below-4g", ram, |
| 0, pcms->below_4g_mem_size); |
| memory_region_add_subregion(system_memory, 0, ram_below_4g); |
| e820_add_entry(0, pcms->below_4g_mem_size, E820_RAM); |
| if (pcms->above_4g_mem_size > 0) { |
| ram_above_4g = g_malloc(sizeof(*ram_above_4g)); |
| memory_region_init_alias(ram_above_4g, NULL, "ram-above-4g", ram, |
| pcms->below_4g_mem_size, |
| pcms->above_4g_mem_size); |
| memory_region_add_subregion(system_memory, 0x100000000ULL, |
| ram_above_4g); |
| e820_add_entry(0x100000000ULL, pcms->above_4g_mem_size, E820_RAM); |
| } |
| |
| if (!pcmc->has_reserved_memory && |
| (machine->ram_slots || |
| (machine->maxram_size > machine->ram_size))) { |
| MachineClass *mc = MACHINE_GET_CLASS(machine); |
| |
| error_report("\"-memory 'slots|maxmem'\" is not supported by: %s", |
| mc->name); |
| exit(EXIT_FAILURE); |
| } |
| |
| /* initialize hotplug memory address space */ |
| if (pcmc->has_reserved_memory && |
| (machine->ram_size < machine->maxram_size)) { |
| ram_addr_t hotplug_mem_size = |
| machine->maxram_size - machine->ram_size; |
| |
| if (machine->ram_slots > ACPI_MAX_RAM_SLOTS) { |
| error_report("unsupported amount of memory slots: %"PRIu64, |
| machine->ram_slots); |
| exit(EXIT_FAILURE); |
| } |
| |
| if (QEMU_ALIGN_UP(machine->maxram_size, |
| TARGET_PAGE_SIZE) != machine->maxram_size) { |
| error_report("maximum memory size must by aligned to multiple of " |
| "%d bytes", TARGET_PAGE_SIZE); |
| exit(EXIT_FAILURE); |
| } |
| |
| pcms->hotplug_memory.base = |
| ROUND_UP(0x100000000ULL + pcms->above_4g_mem_size, 1ULL << 30); |
| |
| if (pcmc->enforce_aligned_dimm) { |
| /* size hotplug region assuming 1G page max alignment per slot */ |
| hotplug_mem_size += (1ULL << 30) * machine->ram_slots; |
| } |
| |
| if ((pcms->hotplug_memory.base + hotplug_mem_size) < |
| hotplug_mem_size) { |
| error_report("unsupported amount of maximum memory: " RAM_ADDR_FMT, |
| machine->maxram_size); |
| exit(EXIT_FAILURE); |
| } |
| |
| memory_region_init(&pcms->hotplug_memory.mr, OBJECT(pcms), |
| "hotplug-memory", hotplug_mem_size); |
| memory_region_add_subregion(system_memory, pcms->hotplug_memory.base, |
| &pcms->hotplug_memory.mr); |
| } |
| |
| /* Initialize PC system firmware */ |
| pc_system_firmware_init(rom_memory, !pcmc->pci_enabled); |
| |
| option_rom_mr = g_malloc(sizeof(*option_rom_mr)); |
| memory_region_init_ram(option_rom_mr, NULL, "pc.rom", PC_ROM_SIZE, |
| &error_fatal); |
| vmstate_register_ram_global(option_rom_mr); |
| memory_region_add_subregion_overlap(rom_memory, |
| PC_ROM_MIN_VGA, |
| option_rom_mr, |
| 1); |
| |
| fw_cfg = bochs_bios_init(&address_space_memory, pcms); |
| |
| rom_set_fw(fw_cfg); |
| |
| if (pcmc->has_reserved_memory && pcms->hotplug_memory.base) { |
| uint64_t *val = g_malloc(sizeof(*val)); |
| PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms); |
| uint64_t res_mem_end = pcms->hotplug_memory.base; |
| |
| if (!pcmc->broken_reserved_end) { |
| res_mem_end += memory_region_size(&pcms->hotplug_memory.mr); |
| } |
| *val = cpu_to_le64(ROUND_UP(res_mem_end, 0x1ULL << 30)); |
| fw_cfg_add_file(fw_cfg, "etc/reserved-memory-end", val, sizeof(*val)); |
| } |
| |
| if (linux_boot) { |
| load_linux(pcms, fw_cfg); |
| } |
| |
| for (i = 0; i < nb_option_roms; i++) { |
| rom_add_option(option_rom[i].name, option_rom[i].bootindex); |
| } |
| pcms->fw_cfg = fw_cfg; |
| |
| /* Init default IOAPIC address space */ |
| pcms->ioapic_as = &address_space_memory; |
| } |
| |
| qemu_irq pc_allocate_cpu_irq(void) |
| { |
| return qemu_allocate_irq(pic_irq_request, NULL, 0); |
| } |
| |
| DeviceState *pc_vga_init(ISABus *isa_bus, PCIBus *pci_bus) |
| { |
| DeviceState *dev = NULL; |
| |
| rom_set_order_override(FW_CFG_ORDER_OVERRIDE_VGA); |
| if (pci_bus) { |
| PCIDevice *pcidev = pci_vga_init(pci_bus); |
| dev = pcidev ? &pcidev->qdev : NULL; |
| } else if (isa_bus) { |
| ISADevice *isadev = isa_vga_init(isa_bus); |
| dev = isadev ? DEVICE(isadev) : NULL; |
| } |
| rom_reset_order_override(); |
| return dev; |
| } |
| |
| static const MemoryRegionOps ioport80_io_ops = { |
| .write = ioport80_write, |
| .read = ioport80_read, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| .impl = { |
| .min_access_size = 1, |
| .max_access_size = 1, |
| }, |
| }; |
| |
| static const MemoryRegionOps ioportF0_io_ops = { |
| .write = ioportF0_write, |
| .read = ioportF0_read, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| .impl = { |
| .min_access_size = 1, |
| .max_access_size = 1, |
| }, |
| }; |
| |
| void pc_basic_device_init(ISABus *isa_bus, qemu_irq *gsi, |
| ISADevice **rtc_state, |
| bool create_fdctrl, |
| bool no_vmport, |
| uint32_t hpet_irqs) |
| { |
| int i; |
| DriveInfo *fd[MAX_FD]; |
| DeviceState *hpet = NULL; |
| int pit_isa_irq = 0; |
| qemu_irq pit_alt_irq = NULL; |
| qemu_irq rtc_irq = NULL; |
| qemu_irq *a20_line; |
| ISADevice *i8042, *port92, *vmmouse, *pit = NULL; |
| MemoryRegion *ioport80_io = g_new(MemoryRegion, 1); |
| MemoryRegion *ioportF0_io = g_new(MemoryRegion, 1); |
| |
| memory_region_init_io(ioport80_io, NULL, &ioport80_io_ops, NULL, "ioport80", 1); |
| memory_region_add_subregion(isa_bus->address_space_io, 0x80, ioport80_io); |
| |
| memory_region_init_io(ioportF0_io, NULL, &ioportF0_io_ops, NULL, "ioportF0", 1); |
| memory_region_add_subregion(isa_bus->address_space_io, 0xf0, ioportF0_io); |
| |
| /* |
| * Check if an HPET shall be created. |
| * |
| * Without KVM_CAP_PIT_STATE2, we cannot switch off the in-kernel PIT |
| * when the HPET wants to take over. Thus we have to disable the latter. |
| */ |
| if (!no_hpet && (!kvm_irqchip_in_kernel() || kvm_has_pit_state2())) { |
| /* In order to set property, here not using sysbus_try_create_simple */ |
| hpet = qdev_try_create(NULL, TYPE_HPET); |
| if (hpet) { |
| /* For pc-piix-*, hpet's intcap is always IRQ2. For pc-q35-1.7 |
| * and earlier, use IRQ2 for compat. Otherwise, use IRQ16~23, |
| * IRQ8 and IRQ2. |
| */ |
| uint8_t compat = object_property_get_int(OBJECT(hpet), |
| HPET_INTCAP, NULL); |
| if (!compat) { |
| qdev_prop_set_uint32(hpet, HPET_INTCAP, hpet_irqs); |
| } |
| qdev_init_nofail(hpet); |
| sysbus_mmio_map(SYS_BUS_DEVICE(hpet), 0, HPET_BASE); |
| |
| for (i = 0; i < GSI_NUM_PINS; i++) { |
| sysbus_connect_irq(SYS_BUS_DEVICE(hpet), i, gsi[i]); |
| } |
| pit_isa_irq = -1; |
| pit_alt_irq = qdev_get_gpio_in(hpet, HPET_LEGACY_PIT_INT); |
| rtc_irq = qdev_get_gpio_in(hpet, HPET_LEGACY_RTC_INT); |
| } |
| } |
| *rtc_state = rtc_init(isa_bus, 2000, rtc_irq); |
| |
| qemu_register_boot_set(pc_boot_set, *rtc_state); |
| |
| if (!xen_enabled()) { |
| if (kvm_pit_in_kernel()) { |
| pit = kvm_pit_init(isa_bus, 0x40); |
| } else { |
| pit = pit_init(isa_bus, 0x40, pit_isa_irq, pit_alt_irq); |
| } |
| if (hpet) { |
| /* connect PIT to output control line of the HPET */ |
| qdev_connect_gpio_out(hpet, 0, qdev_get_gpio_in(DEVICE(pit), 0)); |
| } |
| pcspk_init(isa_bus, pit); |
| } |
| |
| serial_hds_isa_init(isa_bus, 0, MAX_SERIAL_PORTS); |
| parallel_hds_isa_init(isa_bus, MAX_PARALLEL_PORTS); |
| |
| a20_line = qemu_allocate_irqs(handle_a20_line_change, first_cpu, 2); |
| i8042 = isa_create_simple(isa_bus, "i8042"); |
| i8042_setup_a20_line(i8042, a20_line[0]); |
| if (!no_vmport) { |
| vmport_init(isa_bus); |
| vmmouse = isa_try_create(isa_bus, "vmmouse"); |
| } else { |
| vmmouse = NULL; |
| } |
| if (vmmouse) { |
| DeviceState *dev = DEVICE(vmmouse); |
| qdev_prop_set_ptr(dev, "ps2_mouse", i8042); |
| qdev_init_nofail(dev); |
| } |
| port92 = isa_create_simple(isa_bus, "port92"); |
| port92_init(port92, a20_line[1]); |
| g_free(a20_line); |
| |
| DMA_init(isa_bus, 0); |
| |
| for(i = 0; i < MAX_FD; i++) { |
| fd[i] = drive_get(IF_FLOPPY, 0, i); |
| create_fdctrl |= !!fd[i]; |
| } |
| if (create_fdctrl) { |
| fdctrl_init_isa(isa_bus, fd); |
| } |
| } |
| |
| void pc_nic_init(ISABus *isa_bus, PCIBus *pci_bus) |
| { |
| int i; |
| |
| rom_set_order_override(FW_CFG_ORDER_OVERRIDE_NIC); |
| for (i = 0; i < nb_nics; i++) { |
| NICInfo *nd = &nd_table[i]; |
| |
| if (!pci_bus || (nd->model && strcmp(nd->model, "ne2k_isa") == 0)) { |
| pc_init_ne2k_isa(isa_bus, nd); |
| } else { |
| pci_nic_init_nofail(nd, pci_bus, "e1000", NULL); |
| } |
| } |
| rom_reset_order_override(); |
| } |
| |
| void pc_pci_device_init(PCIBus *pci_bus) |
| { |
| int max_bus; |
| int bus; |
| |
| max_bus = drive_get_max_bus(IF_SCSI); |
| for (bus = 0; bus <= max_bus; bus++) { |
| pci_create_simple(pci_bus, -1, "lsi53c895a"); |
| } |
| } |
| |
| void ioapic_init_gsi(GSIState *gsi_state, const char *parent_name) |
| { |
| DeviceState *dev; |
| SysBusDevice *d; |
| unsigned int i; |
| |
| if (kvm_ioapic_in_kernel()) { |
| dev = qdev_create(NULL, "kvm-ioapic"); |
| } else { |
| dev = qdev_create(NULL, "ioapic"); |
| } |
| if (parent_name) { |
| object_property_add_child(object_resolve_path(parent_name, NULL), |
| "ioapic", OBJECT(dev), NULL); |
| } |
| qdev_init_nofail(dev); |
| d = SYS_BUS_DEVICE(dev); |
| sysbus_mmio_map(d, 0, IO_APIC_DEFAULT_ADDRESS); |
| |
| for (i = 0; i < IOAPIC_NUM_PINS; i++) { |
| gsi_state->ioapic_irq[i] = qdev_get_gpio_in(dev, i); |
| } |
| } |
| |
| static void pc_dimm_plug(HotplugHandler *hotplug_dev, |
| DeviceState *dev, Error **errp) |
| { |
| HotplugHandlerClass *hhc; |
| Error *local_err = NULL; |
| PCMachineState *pcms = PC_MACHINE(hotplug_dev); |
| PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms); |
| PCDIMMDevice *dimm = PC_DIMM(dev); |
| PCDIMMDeviceClass *ddc = PC_DIMM_GET_CLASS(dimm); |
| MemoryRegion *mr = ddc->get_memory_region(dimm); |
| uint64_t align = TARGET_PAGE_SIZE; |
| |
| if (memory_region_get_alignment(mr) && pcmc->enforce_aligned_dimm) { |
| align = memory_region_get_alignment(mr); |
| } |
| |
| if (!pcms->acpi_dev) { |
| error_setg(&local_err, |
| "memory hotplug is not enabled: missing acpi device"); |
| goto out; |
| } |
| |
| pc_dimm_memory_plug(dev, &pcms->hotplug_memory, mr, align, &local_err); |
| if (local_err) { |
| goto out; |
| } |
| |
| hhc = HOTPLUG_HANDLER_GET_CLASS(pcms->acpi_dev); |
| hhc->plug(HOTPLUG_HANDLER(pcms->acpi_dev), dev, &error_abort); |
| out: |
| error_propagate(errp, local_err); |
| } |
| |
| static void pc_dimm_unplug_request(HotplugHandler *hotplug_dev, |
| DeviceState *dev, Error **errp) |
| { |
| HotplugHandlerClass *hhc; |
| Error *local_err = NULL; |
| PCMachineState *pcms = PC_MACHINE(hotplug_dev); |
| |
| if (!pcms->acpi_dev) { |
| error_setg(&local_err, |
| "memory hotplug is not enabled: missing acpi device"); |
| goto out; |
| } |
| |
| hhc = HOTPLUG_HANDLER_GET_CLASS(pcms->acpi_dev); |
| hhc->unplug_request(HOTPLUG_HANDLER(pcms->acpi_dev), dev, &local_err); |
| |
| out: |
| error_propagate(errp, local_err); |
| } |
| |
| static void pc_dimm_unplug(HotplugHandler *hotplug_dev, |
| DeviceState *dev, Error **errp) |
| { |
| PCMachineState *pcms = PC_MACHINE(hotplug_dev); |
| PCDIMMDevice *dimm = PC_DIMM(dev); |
| PCDIMMDeviceClass *ddc = PC_DIMM_GET_CLASS(dimm); |
| MemoryRegion *mr = ddc->get_memory_region(dimm); |
| HotplugHandlerClass *hhc; |
| Error *local_err = NULL; |
| |
| hhc = HOTPLUG_HANDLER_GET_CLASS(pcms->acpi_dev); |
| hhc->unplug(HOTPLUG_HANDLER(pcms->acpi_dev), dev, &local_err); |
| |
| if (local_err) { |
| goto out; |
| } |
| |
| pc_dimm_memory_unplug(dev, &pcms->hotplug_memory, mr); |
| object_unparent(OBJECT(dev)); |
| |
| out: |
| error_propagate(errp, local_err); |
| } |
| |
| static int pc_apic_cmp(const void *a, const void *b) |
| { |
| CPUArchId *apic_a = (CPUArchId *)a; |
| CPUArchId *apic_b = (CPUArchId *)b; |
| |
| return apic_a->arch_id - apic_b->arch_id; |
| } |
| |
| /* returns pointer to CPUArchId descriptor that matches CPU's apic_id |
| * in pcms->possible_cpus->cpus, if pcms->possible_cpus->cpus has no |
| * entry correponding to CPU's apic_id returns NULL. |
| */ |
| static CPUArchId *pc_find_cpu_slot(PCMachineState *pcms, CPUState *cpu, |
| int *idx) |
| { |
| CPUClass *cc = CPU_GET_CLASS(cpu); |
| CPUArchId apic_id, *found_cpu; |
| |
| apic_id.arch_id = cc->get_arch_id(CPU(cpu)); |
| found_cpu = bsearch(&apic_id, pcms->possible_cpus->cpus, |
| pcms->possible_cpus->len, sizeof(*pcms->possible_cpus->cpus), |
| pc_apic_cmp); |
| if (found_cpu && idx) { |
| *idx = found_cpu - pcms->possible_cpus->cpus; |
| } |
| return found_cpu; |
| } |
| |
| static void pc_cpu_plug(HotplugHandler *hotplug_dev, |
| DeviceState *dev, Error **errp) |
| { |
| CPUArchId *found_cpu; |
| HotplugHandlerClass *hhc; |
| Error *local_err = NULL; |
| PCMachineState *pcms = PC_MACHINE(hotplug_dev); |
| |
| if (pcms->acpi_dev) { |
| hhc = HOTPLUG_HANDLER_GET_CLASS(pcms->acpi_dev); |
| hhc->plug(HOTPLUG_HANDLER(pcms->acpi_dev), dev, &local_err); |
| if (local_err) { |
| goto out; |
| } |
| } |
| |
| /* increment the number of CPUs */ |
| pcms->boot_cpus_le = cpu_to_le16(le16_to_cpu(pcms->boot_cpus_le) + 1); |
| if (dev->hotplugged) { |
| /* Update the number of CPUs in CMOS */ |
| rtc_set_cpus_count(pcms->rtc, le16_to_cpu(pcms->boot_cpus_le)); |
| } |
| |
| found_cpu = pc_find_cpu_slot(pcms, CPU(dev), NULL); |
| found_cpu->cpu = CPU(dev); |
| out: |
| error_propagate(errp, local_err); |
| } |
| static void pc_cpu_unplug_request_cb(HotplugHandler *hotplug_dev, |
| DeviceState *dev, Error **errp) |
| { |
| int idx = -1; |
| HotplugHandlerClass *hhc; |
| Error *local_err = NULL; |
| PCMachineState *pcms = PC_MACHINE(hotplug_dev); |
| |
| pc_find_cpu_slot(pcms, CPU(dev), &idx); |
| assert(idx != -1); |
| if (idx == 0) { |
| error_setg(&local_err, "Boot CPU is unpluggable"); |
| goto out; |
| } |
| |
| hhc = HOTPLUG_HANDLER_GET_CLASS(pcms->acpi_dev); |
| hhc->unplug_request(HOTPLUG_HANDLER(pcms->acpi_dev), dev, &local_err); |
| |
| if (local_err) { |
| goto out; |
| } |
| |
| out: |
| error_propagate(errp, local_err); |
| |
| } |
| |
| static void pc_cpu_unplug_cb(HotplugHandler *hotplug_dev, |
| DeviceState *dev, Error **errp) |
| { |
| CPUArchId *found_cpu; |
| HotplugHandlerClass *hhc; |
| Error *local_err = NULL; |
| PCMachineState *pcms = PC_MACHINE(hotplug_dev); |
| |
| hhc = HOTPLUG_HANDLER_GET_CLASS(pcms->acpi_dev); |
| hhc->unplug(HOTPLUG_HANDLER(pcms->acpi_dev), dev, &local_err); |
| |
| if (local_err) { |
| goto out; |
| } |
| |
| found_cpu = pc_find_cpu_slot(pcms, CPU(dev), NULL); |
| found_cpu->cpu = NULL; |
| object_unparent(OBJECT(dev)); |
| |
| /* decrement the number of CPUs */ |
| pcms->boot_cpus_le = cpu_to_le16(le16_to_cpu(pcms->boot_cpus_le) - 1); |
| /* Update the number of CPUs in CMOS */ |
| rtc_set_cpus_count(pcms->rtc, le16_to_cpu(pcms->boot_cpus_le)); |
| out: |
| error_propagate(errp, local_err); |
| } |
| |
| static void pc_cpu_pre_plug(HotplugHandler *hotplug_dev, |
| DeviceState *dev, Error **errp) |
| { |
| int idx; |
| CPUState *cs; |
| CPUArchId *cpu_slot; |
| X86CPUTopoInfo topo; |
| X86CPU *cpu = X86_CPU(dev); |
| PCMachineState *pcms = PC_MACHINE(hotplug_dev); |
| |
| /* if APIC ID is not set, set it based on socket/core/thread properties */ |
| if (cpu->apic_id == UNASSIGNED_APIC_ID) { |
| int max_socket = (max_cpus - 1) / smp_threads / smp_cores; |
| |
| if (cpu->socket_id < 0) { |
| error_setg(errp, "CPU socket-id is not set"); |
| return; |
| } else if (cpu->socket_id > max_socket) { |
| error_setg(errp, "Invalid CPU socket-id: %u must be in range 0:%u", |
| cpu->socket_id, max_socket); |
| return; |
| } |
| if (cpu->core_id < 0) { |
| error_setg(errp, "CPU core-id is not set"); |
| return; |
| } else if (cpu->core_id > (smp_cores - 1)) { |
| error_setg(errp, "Invalid CPU core-id: %u must be in range 0:%u", |
| cpu->core_id, smp_cores - 1); |
| return; |
| } |
| if (cpu->thread_id < 0) { |
| error_setg(errp, "CPU thread-id is not set"); |
| return; |
| } else if (cpu->thread_id > (smp_threads - 1)) { |
| error_setg(errp, "Invalid CPU thread-id: %u must be in range 0:%u", |
| cpu->thread_id, smp_threads - 1); |
| return; |
| } |
| |
| topo.pkg_id = cpu->socket_id; |
| topo.core_id = cpu->core_id; |
| topo.smt_id = cpu->thread_id; |
| cpu->apic_id = apicid_from_topo_ids(smp_cores, smp_threads, &topo); |
| } |
| |
| cpu_slot = pc_find_cpu_slot(pcms, CPU(dev), &idx); |
| if (!cpu_slot) { |
| x86_topo_ids_from_apicid(cpu->apic_id, smp_cores, smp_threads, &topo); |
| error_setg(errp, "Invalid CPU [socket: %u, core: %u, thread: %u] with" |
| " APIC ID %" PRIu32 ", valid index range 0:%d", |
| topo.pkg_id, topo.core_id, topo.smt_id, cpu->apic_id, |
| pcms->possible_cpus->len - 1); |
| return; |
| } |
| |
| if (cpu_slot->cpu) { |
| error_setg(errp, "CPU[%d] with APIC ID %" PRIu32 " exists", |
| idx, cpu->apic_id); |
| return; |
| } |
| |
| /* if 'address' properties socket-id/core-id/thread-id are not set, set them |
| * so that query_hotpluggable_cpus would show correct values |
| */ |
| /* TODO: move socket_id/core_id/thread_id checks into x86_cpu_realizefn() |
| * once -smp refactoring is complete and there will be CPU private |
| * CPUState::nr_cores and CPUState::nr_threads fields instead of globals */ |
| x86_topo_ids_from_apicid(cpu->apic_id, smp_cores, smp_threads, &topo); |
| if (cpu->socket_id != -1 && cpu->socket_id != topo.pkg_id) { |
| error_setg(errp, "property socket-id: %u doesn't match set apic-id:" |
| " 0x%x (socket-id: %u)", cpu->socket_id, cpu->apic_id, topo.pkg_id); |
| return; |
| } |
| cpu->socket_id = topo.pkg_id; |
| |
| if (cpu->core_id != -1 && cpu->core_id != topo.core_id) { |
| error_setg(errp, "property core-id: %u doesn't match set apic-id:" |
| " 0x%x (core-id: %u)", cpu->core_id, cpu->apic_id, topo.core_id); |
| return; |
| } |
| cpu->core_id = topo.core_id; |
| |
| if (cpu->thread_id != -1 && cpu->thread_id != topo.smt_id) { |
| error_setg(errp, "property thread-id: %u doesn't match set apic-id:" |
| " 0x%x (thread-id: %u)", cpu->thread_id, cpu->apic_id, topo.smt_id); |
| return; |
| } |
| cpu->thread_id = topo.smt_id; |
| |
| cs = CPU(cpu); |
| cs->cpu_index = idx; |
| } |
| |
| static void pc_machine_device_pre_plug_cb(HotplugHandler *hotplug_dev, |
| DeviceState *dev, Error **errp) |
| { |
| if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) { |
| pc_cpu_pre_plug(hotplug_dev, dev, errp); |
| } |
| } |
| |
| static void pc_machine_device_plug_cb(HotplugHandler *hotplug_dev, |
| DeviceState *dev, Error **errp) |
| { |
| if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { |
| pc_dimm_plug(hotplug_dev, dev, errp); |
| } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) { |
| pc_cpu_plug(hotplug_dev, dev, errp); |
| } |
| } |
| |
| static void pc_machine_device_unplug_request_cb(HotplugHandler *hotplug_dev, |
| DeviceState *dev, Error **errp) |
| { |
| if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { |
| pc_dimm_unplug_request(hotplug_dev, dev, errp); |
| } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) { |
| pc_cpu_unplug_request_cb(hotplug_dev, dev, errp); |
| } else { |
| error_setg(errp, "acpi: device unplug request for not supported device" |
| " type: %s", object_get_typename(OBJECT(dev))); |
| } |
| } |
| |
| static void pc_machine_device_unplug_cb(HotplugHandler *hotplug_dev, |
| DeviceState *dev, Error **errp) |
| { |
| if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { |
| pc_dimm_unplug(hotplug_dev, dev, errp); |
| } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) { |
| pc_cpu_unplug_cb(hotplug_dev, dev, errp); |
| } else { |
| error_setg(errp, "acpi: device unplug for not supported device" |
| " type: %s", object_get_typename(OBJECT(dev))); |
| } |
| } |
| |
| static HotplugHandler *pc_get_hotpug_handler(MachineState *machine, |
| DeviceState *dev) |
| { |
| PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(machine); |
| |
| if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM) || |
| object_dynamic_cast(OBJECT(dev), TYPE_CPU)) { |
| return HOTPLUG_HANDLER(machine); |
| } |
| |
| return pcmc->get_hotplug_handler ? |
| pcmc->get_hotplug_handler(machine, dev) : NULL; |
| } |
| |
| static void |
| pc_machine_get_hotplug_memory_region_size(Object *obj, Visitor *v, |
| const char *name, void *opaque, |
| Error **errp) |
| { |
| PCMachineState *pcms = PC_MACHINE(obj); |
| int64_t value = memory_region_size(&pcms->hotplug_memory.mr); |
| |
| visit_type_int(v, name, &value, errp); |
| } |
| |
| static void pc_machine_get_max_ram_below_4g(Object *obj, Visitor *v, |
| const char *name, void *opaque, |
| Error **errp) |
| { |
| PCMachineState *pcms = PC_MACHINE(obj); |
| uint64_t value = pcms->max_ram_below_4g; |
| |
| visit_type_size(v, name, &value, errp); |
| } |
| |
| static void pc_machine_set_max_ram_below_4g(Object *obj, Visitor *v, |
| const char *name, void *opaque, |
| Error **errp) |
| { |
| PCMachineState *pcms = PC_MACHINE(obj); |
| Error *error = NULL; |
| uint64_t value; |
| |
| visit_type_size(v, name, &value, &error); |
| if (error) { |
| error_propagate(errp, error); |
| return; |
| } |
| if (value > (1ULL << 32)) { |
| error_setg(&error, |
| "Machine option 'max-ram-below-4g=%"PRIu64 |
| "' expects size less than or equal to 4G", value); |
| error_propagate(errp, error); |
| return; |
| } |
| |
| if (value < (1ULL << 20)) { |
| error_report("Warning: small max_ram_below_4g(%"PRIu64 |
| ") less than 1M. BIOS may not work..", |
| value); |
| } |
| |
| pcms->max_ram_below_4g = value; |
| } |
| |
| static void pc_machine_get_vmport(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| PCMachineState *pcms = PC_MACHINE(obj); |
| OnOffAuto vmport = pcms->vmport; |
| |
| visit_type_OnOffAuto(v, name, &vmport, errp); |
| } |
| |
| static void pc_machine_set_vmport(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| PCMachineState *pcms = PC_MACHINE(obj); |
| |
| visit_type_OnOffAuto(v, name, &pcms->vmport, errp); |
| } |
| |
| bool pc_machine_is_smm_enabled(PCMachineState *pcms) |
| { |
| bool smm_available = false; |
| |
| if (pcms->smm == ON_OFF_AUTO_OFF) { |
| return false; |
| } |
| |
| if (tcg_enabled() || qtest_enabled()) { |
| smm_available = true; |
| } else if (kvm_enabled()) { |
| smm_available = kvm_has_smm(); |
| } |
| |
| if (smm_available) { |
| return true; |
| } |
| |
| if (pcms->smm == ON_OFF_AUTO_ON) { |
| error_report("System Management Mode not supported by this hypervisor."); |
| exit(1); |
| } |
| return false; |
| } |
| |
| static void pc_machine_get_smm(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| PCMachineState *pcms = PC_MACHINE(obj); |
| OnOffAuto smm = pcms->smm; |
| |
| visit_type_OnOffAuto(v, name, &smm, errp); |
| } |
| |
| static void pc_machine_set_smm(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| PCMachineState *pcms = PC_MACHINE(obj); |
| |
| visit_type_OnOffAuto(v, name, &pcms->smm, errp); |
| } |
| |
| static bool pc_machine_get_nvdimm(Object *obj, Error **errp) |
| { |
| PCMachineState *pcms = PC_MACHINE(obj); |
| |
| return pcms->acpi_nvdimm_state.is_enabled; |
| } |
| |
| static void pc_machine_set_nvdimm(Object *obj, bool value, Error **errp) |
| { |
| PCMachineState *pcms = PC_MACHINE(obj); |
| |
| pcms->acpi_nvdimm_state.is_enabled = value; |
| } |
| |
| static void pc_machine_initfn(Object *obj) |
| { |
| PCMachineState *pcms = PC_MACHINE(obj); |
| |
| pcms->max_ram_below_4g = 0; /* use default */ |
| pcms->smm = ON_OFF_AUTO_AUTO; |
| pcms->vmport = ON_OFF_AUTO_AUTO; |
| /* nvdimm is disabled on default. */ |
| pcms->acpi_nvdimm_state.is_enabled = false; |
| } |
| |
| static void pc_machine_reset(void) |
| { |
| CPUState *cs; |
| X86CPU *cpu; |
| |
| qemu_devices_reset(); |
| |
| /* Reset APIC after devices have been reset to cancel |
| * any changes that qemu_devices_reset() might have done. |
| */ |
| CPU_FOREACH(cs) { |
| cpu = X86_CPU(cs); |
| |
| if (cpu->apic_state) { |
| device_reset(cpu->apic_state); |
| } |
| } |
| } |
| |
| static unsigned pc_cpu_index_to_socket_id(unsigned cpu_index) |
| { |
| X86CPUTopoInfo topo; |
| x86_topo_ids_from_idx(smp_cores, smp_threads, cpu_index, |
| &topo); |
| return topo.pkg_id; |
| } |
| |
| static CPUArchIdList *pc_possible_cpu_arch_ids(MachineState *machine) |
| { |
| PCMachineState *pcms = PC_MACHINE(machine); |
| int len = sizeof(CPUArchIdList) + |
| sizeof(CPUArchId) * (pcms->possible_cpus->len); |
| CPUArchIdList *list = g_malloc(len); |
| |
| memcpy(list, pcms->possible_cpus, len); |
| return list; |
| } |
| |
| static HotpluggableCPUList *pc_query_hotpluggable_cpus(MachineState *machine) |
| { |
| int i; |
| CPUState *cpu; |
| HotpluggableCPUList *head = NULL; |
| PCMachineState *pcms = PC_MACHINE(machine); |
| const char *cpu_type; |
| |
| cpu = pcms->possible_cpus->cpus[0].cpu; |
| assert(cpu); /* BSP is always present */ |
| cpu_type = object_class_get_name(OBJECT_CLASS(CPU_GET_CLASS(cpu))); |
| |
| for (i = 0; i < pcms->possible_cpus->len; i++) { |
| X86CPUTopoInfo topo; |
| HotpluggableCPUList *list_item = g_new0(typeof(*list_item), 1); |
| HotpluggableCPU *cpu_item = g_new0(typeof(*cpu_item), 1); |
| CpuInstanceProperties *cpu_props = g_new0(typeof(*cpu_props), 1); |
| const uint32_t apic_id = pcms->possible_cpus->cpus[i].arch_id; |
| |
| x86_topo_ids_from_apicid(apic_id, smp_cores, smp_threads, &topo); |
| |
| cpu_item->type = g_strdup(cpu_type); |
| cpu_item->vcpus_count = 1; |
| cpu_props->has_socket_id = true; |
| cpu_props->socket_id = topo.pkg_id; |
| cpu_props->has_core_id = true; |
| cpu_props->core_id = topo.core_id; |
| cpu_props->has_thread_id = true; |
| cpu_props->thread_id = topo.smt_id; |
| cpu_item->props = cpu_props; |
| |
| cpu = pcms->possible_cpus->cpus[i].cpu; |
| if (cpu) { |
| cpu_item->has_qom_path = true; |
| cpu_item->qom_path = object_get_canonical_path(OBJECT(cpu)); |
| } |
| |
| list_item->value = cpu_item; |
| list_item->next = head; |
| head = list_item; |
| } |
| return head; |
| } |
| |
| static void x86_nmi(NMIState *n, int cpu_index, Error **errp) |
| { |
| /* cpu index isn't used */ |
| CPUState *cs; |
| |
| CPU_FOREACH(cs) { |
| X86CPU *cpu = X86_CPU(cs); |
| |
| if (!cpu->apic_state) { |
| cpu_interrupt(cs, CPU_INTERRUPT_NMI); |
| } else { |
| apic_deliver_nmi(cpu->apic_state); |
| } |
| } |
| } |
| |
| static void pc_machine_class_init(ObjectClass *oc, void *data) |
| { |
| MachineClass *mc = MACHINE_CLASS(oc); |
| PCMachineClass *pcmc = PC_MACHINE_CLASS(oc); |
| HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(oc); |
| NMIClass *nc = NMI_CLASS(oc); |
| |
| pcmc->get_hotplug_handler = mc->get_hotplug_handler; |
| pcmc->pci_enabled = true; |
| pcmc->has_acpi_build = true; |
| pcmc->rsdp_in_ram = true; |
| pcmc->smbios_defaults = true; |
| pcmc->smbios_uuid_encoded = true; |
| pcmc->gigabyte_align = true; |
| pcmc->has_reserved_memory = true; |
| pcmc->kvmclock_enabled = true; |
| pcmc->enforce_aligned_dimm = true; |
| /* BIOS ACPI tables: 128K. Other BIOS datastructures: less than 4K reported |
| * to be used at the moment, 32K should be enough for a while. */ |
| pcmc->acpi_data_size = 0x20000 + 0x8000; |
| pcmc->save_tsc_khz = true; |
| mc->get_hotplug_handler = pc_get_hotpug_handler; |
| mc->cpu_index_to_socket_id = pc_cpu_index_to_socket_id; |
| mc->possible_cpu_arch_ids = pc_possible_cpu_arch_ids; |
| mc->query_hotpluggable_cpus = pc_query_hotpluggable_cpus; |
| mc->default_boot_order = "cad"; |
| mc->hot_add_cpu = pc_hot_add_cpu; |
| mc->max_cpus = 255; |
| mc->reset = pc_machine_reset; |
| hc->pre_plug = pc_machine_device_pre_plug_cb; |
| hc->plug = pc_machine_device_plug_cb; |
| hc->unplug_request = pc_machine_device_unplug_request_cb; |
| hc->unplug = pc_machine_device_unplug_cb; |
| nc->nmi_monitor_handler = x86_nmi; |
| |
| object_class_property_add(oc, PC_MACHINE_MEMHP_REGION_SIZE, "int", |
| pc_machine_get_hotplug_memory_region_size, NULL, |
| NULL, NULL, &error_abort); |
| |
| object_class_property_add(oc, PC_MACHINE_MAX_RAM_BELOW_4G, "size", |
| pc_machine_get_max_ram_below_4g, pc_machine_set_max_ram_below_4g, |
| NULL, NULL, &error_abort); |
| |
| object_class_property_set_description(oc, PC_MACHINE_MAX_RAM_BELOW_4G, |
| "Maximum ram below the 4G boundary (32bit boundary)", &error_abort); |
| |
| object_class_property_add(oc, PC_MACHINE_SMM, "OnOffAuto", |
| pc_machine_get_smm, pc_machine_set_smm, |
| NULL, NULL, &error_abort); |
| object_class_property_set_description(oc, PC_MACHINE_SMM, |
| "Enable SMM (pc & q35)", &error_abort); |
| |
| object_class_property_add(oc, PC_MACHINE_VMPORT, "OnOffAuto", |
| pc_machine_get_vmport, pc_machine_set_vmport, |
| NULL, NULL, &error_abort); |
| object_class_property_set_description(oc, PC_MACHINE_VMPORT, |
| "Enable vmport (pc & q35)", &error_abort); |
| |
| object_class_property_add_bool(oc, PC_MACHINE_NVDIMM, |
| pc_machine_get_nvdimm, pc_machine_set_nvdimm, &error_abort); |
| } |
| |
| static const TypeInfo pc_machine_info = { |
| .name = TYPE_PC_MACHINE, |
| .parent = TYPE_MACHINE, |
| .abstract = true, |
| .instance_size = sizeof(PCMachineState), |
| .instance_init = pc_machine_initfn, |
| .class_size = sizeof(PCMachineClass), |
| .class_init = pc_machine_class_init, |
| .interfaces = (InterfaceInfo[]) { |
| { TYPE_HOTPLUG_HANDLER }, |
| { TYPE_NMI }, |
| { } |
| }, |
| }; |
| |
| static void pc_machine_register_types(void) |
| { |
| type_register_static(&pc_machine_info); |
| } |
| |
| type_init(pc_machine_register_types) |