| /* |
| * ASPEED SDRAM Memory Controller |
| * |
| * Copyright (C) 2016 IBM Corp. |
| * |
| * This code is licensed under the GPL version 2 or later. See |
| * the COPYING file in the top-level directory. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu/log.h" |
| #include "qemu/module.h" |
| #include "qemu/error-report.h" |
| #include "hw/misc/aspeed_sdmc.h" |
| #include "hw/qdev-properties.h" |
| #include "migration/vmstate.h" |
| #include "qapi/error.h" |
| #include "trace.h" |
| #include "qemu/units.h" |
| #include "qemu/cutils.h" |
| #include "qapi/visitor.h" |
| |
| /* Protection Key Register */ |
| #define R_PROT (0x00 / 4) |
| #define PROT_UNLOCKED 0x01 |
| #define PROT_HARDLOCKED 0x10 /* AST2600 */ |
| #define PROT_SOFTLOCKED 0x00 |
| |
| #define PROT_KEY_UNLOCK 0xFC600309 |
| #define PROT_2700_KEY_UNLOCK 0x1688A8A8 |
| #define PROT_KEY_HARDLOCK 0xDEADDEAD /* AST2600 */ |
| |
| /* Configuration Register */ |
| #define R_CONF (0x04 / 4) |
| |
| /* Interrupt control/status */ |
| #define R_ISR (0x50 / 4) |
| |
| /* Control/Status Register #1 (ast2500) */ |
| #define R_STATUS1 (0x60 / 4) |
| #define PHY_BUSY_STATE BIT(0) |
| #define PHY_PLL_LOCK_STATUS BIT(4) |
| |
| /* Reserved */ |
| #define R_MCR6C (0x6c / 4) |
| |
| #define R_ECC_TEST_CTRL (0x70 / 4) |
| #define ECC_TEST_FINISHED BIT(12) |
| #define ECC_TEST_FAIL BIT(13) |
| |
| #define R_TEST_START_LEN (0x74 / 4) |
| #define R_TEST_FAIL_DQ (0x78 / 4) |
| #define R_TEST_INIT_VAL (0x7c / 4) |
| #define R_DRAM_SW (0x88 / 4) |
| #define R_DRAM_TIME (0x8c / 4) |
| #define R_ECC_ERR_INJECT (0xb4 / 4) |
| |
| /* AST2700 Register */ |
| #define R_2700_PROT (0x00 / 4) |
| #define R_INT_STATUS (0x04 / 4) |
| #define R_INT_CLEAR (0x08 / 4) |
| #define R_INT_MASK (0x0c / 4) |
| #define R_MAIN_CONF (0x10 / 4) |
| #define R_MAIN_CONTROL (0x14 / 4) |
| #define R_MAIN_STATUS (0x18 / 4) |
| #define R_ERR_STATUS (0x1c / 4) |
| #define R_ECC_FAIL_STATUS (0x78 / 4) |
| #define R_ECC_FAIL_ADDR (0x7c / 4) |
| #define R_ECC_TESTING_CONTROL (0x80 / 4) |
| #define R_PROT_REGION_LOCK_STATUS (0x94 / 4) |
| #define R_TEST_FAIL_ADDR (0xd4 / 4) |
| #define R_TEST_FAIL_D0 (0xd8 / 4) |
| #define R_TEST_FAIL_D1 (0xdc / 4) |
| #define R_TEST_FAIL_D2 (0xe0 / 4) |
| #define R_TEST_FAIL_D3 (0xe4 / 4) |
| #define R_DBG_STATUS (0xf4 / 4) |
| #define R_PHY_INTERFACE_STATUS (0xf8 / 4) |
| #define R_GRAPHIC_MEM_BASE_ADDR (0x10c / 4) |
| #define R_PORT0_INTERFACE_MONITOR0 (0x240 / 4) |
| #define R_PORT0_INTERFACE_MONITOR1 (0x244 / 4) |
| #define R_PORT0_INTERFACE_MONITOR2 (0x248 / 4) |
| #define R_PORT1_INTERFACE_MONITOR0 (0x2c0 / 4) |
| #define R_PORT1_INTERFACE_MONITOR1 (0x2c4 / 4) |
| #define R_PORT1_INTERFACE_MONITOR2 (0x2c8 / 4) |
| #define R_PORT2_INTERFACE_MONITOR0 (0x340 / 4) |
| #define R_PORT2_INTERFACE_MONITOR1 (0x344 / 4) |
| #define R_PORT2_INTERFACE_MONITOR2 (0x348 / 4) |
| #define R_PORT3_INTERFACE_MONITOR0 (0x3c0 / 4) |
| #define R_PORT3_INTERFACE_MONITOR1 (0x3c4 / 4) |
| #define R_PORT3_INTERFACE_MONITOR2 (0x3c8 / 4) |
| #define R_PORT4_INTERFACE_MONITOR0 (0x440 / 4) |
| #define R_PORT4_INTERFACE_MONITOR1 (0x444 / 4) |
| #define R_PORT4_INTERFACE_MONITOR2 (0x448 / 4) |
| #define R_PORT5_INTERFACE_MONITOR0 (0x4c0 / 4) |
| #define R_PORT5_INTERFACE_MONITOR1 (0x4c4 / 4) |
| #define R_PORT5_INTERFACE_MONITOR2 (0x4c8 / 4) |
| |
| /* |
| * Configuration register Ox4 (for Aspeed AST2400 SOC) |
| * |
| * These are for the record and future use. ASPEED_SDMC_DRAM_SIZE is |
| * what we care about right now as it is checked by U-Boot to |
| * determine the RAM size. |
| */ |
| |
| #define ASPEED_SDMC_RESERVED 0xFFFFF800 /* 31:11 reserved */ |
| #define ASPEED_SDMC_AST2300_COMPAT (1 << 10) |
| #define ASPEED_SDMC_SCRAMBLE_PATTERN (1 << 9) |
| #define ASPEED_SDMC_DATA_SCRAMBLE (1 << 8) |
| #define ASPEED_SDMC_ECC_ENABLE (1 << 7) |
| #define ASPEED_SDMC_VGA_COMPAT (1 << 6) /* readonly */ |
| #define ASPEED_SDMC_DRAM_BANK (1 << 5) |
| #define ASPEED_SDMC_DRAM_BURST (1 << 4) |
| #define ASPEED_SDMC_VGA_APERTURE(x) ((x & 0x3) << 2) /* readonly */ |
| #define ASPEED_SDMC_VGA_8MB 0x0 |
| #define ASPEED_SDMC_VGA_16MB 0x1 |
| #define ASPEED_SDMC_VGA_32MB 0x2 |
| #define ASPEED_SDMC_VGA_64MB 0x3 |
| #define ASPEED_SDMC_DRAM_SIZE(x) (x & 0x3) |
| |
| #define ASPEED_SDMC_READONLY_MASK \ |
| (ASPEED_SDMC_RESERVED | ASPEED_SDMC_VGA_COMPAT | \ |
| ASPEED_SDMC_VGA_APERTURE(ASPEED_SDMC_VGA_64MB)) |
| /* |
| * Configuration register Ox4 (for Aspeed AST2500 SOC and higher) |
| * |
| * Incompatibilities are annotated in the list. ASPEED_SDMC_HW_VERSION |
| * should be set to 1 for the AST2500 SOC. |
| */ |
| #define ASPEED_SDMC_HW_VERSION(x) ((x & 0xf) << 28) /* readonly */ |
| #define ASPEED_SDMC_SW_VERSION ((x & 0xff) << 20) |
| #define ASPEED_SDMC_CACHE_INITIAL_DONE (1 << 19) /* readonly */ |
| #define ASPEED_SDMC_AST2500_RESERVED 0x7C000 /* 18:14 reserved */ |
| #define ASPEED_SDMC_CACHE_DDR4_CONF (1 << 13) |
| #define ASPEED_SDMC_CACHE_INITIAL (1 << 12) |
| #define ASPEED_SDMC_CACHE_RANGE_CTRL (1 << 11) |
| #define ASPEED_SDMC_CACHE_ENABLE (1 << 10) /* differs from AST2400 */ |
| #define ASPEED_SDMC_DRAM_TYPE (1 << 4) /* differs from AST2400 */ |
| |
| #define ASPEED_SDMC_AST2500_READONLY_MASK \ |
| (ASPEED_SDMC_HW_VERSION(0xf) | ASPEED_SDMC_CACHE_INITIAL_DONE | \ |
| ASPEED_SDMC_AST2500_RESERVED | ASPEED_SDMC_VGA_COMPAT | \ |
| ASPEED_SDMC_VGA_APERTURE(ASPEED_SDMC_VGA_64MB)) |
| |
| /* |
| * Main Configuration register Ox10 (for Aspeed AST2700 SOC and higher) |
| * |
| */ |
| #define ASPEED_SDMC_AST2700_RESERVED 0xFFFF2082 /* 31:16, 13, 7, 1 */ |
| #define ASPEED_SDMC_AST2700_DATA_SCRAMBLE (1 << 8) |
| #define ASPEED_SDMC_AST2700_ECC_ENABLE (1 << 6) |
| #define ASPEED_SDMC_AST2700_PAGE_MATCHING_ENABLE (1 << 5) |
| #define ASPEED_SDMC_AST2700_DRAM_SIZE(x) ((x & 0x7) << 2) |
| |
| #define ASPEED_SDMC_AST2700_READONLY_MASK \ |
| (ASPEED_SDMC_AST2700_RESERVED) |
| |
| static uint64_t aspeed_sdmc_read(void *opaque, hwaddr addr, unsigned size) |
| { |
| AspeedSDMCState *s = ASPEED_SDMC(opaque); |
| |
| addr >>= 2; |
| |
| if (addr >= ARRAY_SIZE(s->regs)) { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "%s: Out-of-bounds read at offset 0x%" HWADDR_PRIx "\n", |
| __func__, addr * 4); |
| return 0; |
| } |
| |
| trace_aspeed_sdmc_read(addr, s->regs[addr]); |
| return s->regs[addr]; |
| } |
| |
| static void aspeed_sdmc_write(void *opaque, hwaddr addr, uint64_t data, |
| unsigned int size) |
| { |
| AspeedSDMCState *s = ASPEED_SDMC(opaque); |
| AspeedSDMCClass *asc = ASPEED_SDMC_GET_CLASS(s); |
| |
| addr >>= 2; |
| |
| if (addr >= ARRAY_SIZE(s->regs)) { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n", |
| __func__, addr); |
| return; |
| } |
| |
| trace_aspeed_sdmc_write(addr, data); |
| asc->write(s, addr, data); |
| } |
| |
| static const MemoryRegionOps aspeed_sdmc_ops = { |
| .read = aspeed_sdmc_read, |
| .write = aspeed_sdmc_write, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| .valid.min_access_size = 4, |
| .valid.max_access_size = 4, |
| }; |
| |
| static void aspeed_sdmc_reset(DeviceState *dev) |
| { |
| AspeedSDMCState *s = ASPEED_SDMC(dev); |
| AspeedSDMCClass *asc = ASPEED_SDMC_GET_CLASS(s); |
| |
| memset(s->regs, 0, sizeof(s->regs)); |
| |
| /* Set ram size bit and defaults values */ |
| s->regs[R_CONF] = asc->compute_conf(s, 0); |
| |
| /* |
| * PHY status: |
| * - set phy status ok (set bit 1) |
| * - initial PVT calibration ok (clear bit 3) |
| * - runtime calibration ok (clear bit 5) |
| */ |
| s->regs[0x100] = BIT(1); |
| |
| /* PHY eye window: set all as passing */ |
| s->regs[0x100 | (0x68 / 4)] = 0xff; |
| s->regs[0x100 | (0x7c / 4)] = 0xff; |
| s->regs[0x100 | (0x50 / 4)] = 0xfffffff; |
| } |
| |
| static void aspeed_sdmc_get_ram_size(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| AspeedSDMCState *s = ASPEED_SDMC(obj); |
| int64_t value = s->ram_size; |
| |
| visit_type_int(v, name, &value, errp); |
| } |
| |
| static void aspeed_sdmc_set_ram_size(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| int i; |
| char *sz; |
| int64_t value; |
| AspeedSDMCState *s = ASPEED_SDMC(obj); |
| AspeedSDMCClass *asc = ASPEED_SDMC_GET_CLASS(s); |
| |
| if (!visit_type_int(v, name, &value, errp)) { |
| return; |
| } |
| |
| for (i = 0; asc->valid_ram_sizes[i]; i++) { |
| if (value == asc->valid_ram_sizes[i]) { |
| s->ram_size = value; |
| return; |
| } |
| } |
| |
| sz = size_to_str(value); |
| error_setg(errp, "Invalid RAM size %s", sz); |
| g_free(sz); |
| } |
| |
| static void aspeed_sdmc_initfn(Object *obj) |
| { |
| object_property_add(obj, "ram-size", "int", |
| aspeed_sdmc_get_ram_size, aspeed_sdmc_set_ram_size, |
| NULL, NULL); |
| } |
| |
| static void aspeed_sdmc_realize(DeviceState *dev, Error **errp) |
| { |
| SysBusDevice *sbd = SYS_BUS_DEVICE(dev); |
| AspeedSDMCState *s = ASPEED_SDMC(dev); |
| AspeedSDMCClass *asc = ASPEED_SDMC_GET_CLASS(s); |
| |
| assert(asc->max_ram_size < 4 * GiB || asc->is_bus64bit); |
| |
| if (!s->ram_size) { |
| error_setg(errp, "RAM size is not set"); |
| return; |
| } |
| |
| s->max_ram_size = asc->max_ram_size; |
| |
| memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_sdmc_ops, s, |
| TYPE_ASPEED_SDMC, 0x1000); |
| sysbus_init_mmio(sbd, &s->iomem); |
| } |
| |
| static const VMStateDescription vmstate_aspeed_sdmc = { |
| .name = "aspeed.sdmc", |
| .version_id = 2, |
| .minimum_version_id = 2, |
| .fields = (const VMStateField[]) { |
| VMSTATE_UINT32_ARRAY(regs, AspeedSDMCState, ASPEED_SDMC_NR_REGS), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static Property aspeed_sdmc_properties[] = { |
| DEFINE_PROP_UINT64("max-ram-size", AspeedSDMCState, max_ram_size, 0), |
| DEFINE_PROP_BOOL("unlocked", AspeedSDMCState, unlocked, false), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void aspeed_sdmc_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| dc->realize = aspeed_sdmc_realize; |
| dc->reset = aspeed_sdmc_reset; |
| dc->desc = "ASPEED SDRAM Memory Controller"; |
| dc->vmsd = &vmstate_aspeed_sdmc; |
| device_class_set_props(dc, aspeed_sdmc_properties); |
| } |
| |
| static const TypeInfo aspeed_sdmc_info = { |
| .name = TYPE_ASPEED_SDMC, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(AspeedSDMCState), |
| .instance_init = aspeed_sdmc_initfn, |
| .class_init = aspeed_sdmc_class_init, |
| .class_size = sizeof(AspeedSDMCClass), |
| .abstract = true, |
| }; |
| |
| static int aspeed_sdmc_get_ram_bits(AspeedSDMCState *s) |
| { |
| AspeedSDMCClass *asc = ASPEED_SDMC_GET_CLASS(s); |
| int i; |
| |
| /* |
| * The bitfield value encoding the RAM size is the index of the |
| * possible RAM size array |
| */ |
| for (i = 0; asc->valid_ram_sizes[i]; i++) { |
| if (s->ram_size == asc->valid_ram_sizes[i]) { |
| return i; |
| } |
| } |
| |
| /* |
| * Invalid RAM sizes should have been excluded when setting the |
| * SoC RAM size. |
| */ |
| g_assert_not_reached(); |
| } |
| |
| static uint32_t aspeed_2400_sdmc_compute_conf(AspeedSDMCState *s, uint32_t data) |
| { |
| uint32_t fixed_conf = ASPEED_SDMC_VGA_COMPAT | |
| ASPEED_SDMC_DRAM_SIZE(aspeed_sdmc_get_ram_bits(s)); |
| |
| /* Make sure readonly bits are kept */ |
| data &= ~ASPEED_SDMC_READONLY_MASK; |
| |
| return data | fixed_conf; |
| } |
| |
| static void aspeed_2400_sdmc_write(AspeedSDMCState *s, uint32_t reg, |
| uint32_t data) |
| { |
| if (reg == R_PROT) { |
| s->regs[reg] = |
| (data == PROT_KEY_UNLOCK) ? PROT_UNLOCKED : PROT_SOFTLOCKED; |
| return; |
| } |
| |
| if (!s->regs[R_PROT]) { |
| qemu_log_mask(LOG_GUEST_ERROR, "%s: SDMC is locked!\n", __func__); |
| return; |
| } |
| |
| switch (reg) { |
| case R_CONF: |
| data = aspeed_2400_sdmc_compute_conf(s, data); |
| break; |
| default: |
| break; |
| } |
| |
| s->regs[reg] = data; |
| } |
| |
| static const uint64_t |
| aspeed_2400_ram_sizes[] = { 64 * MiB, 128 * MiB, 256 * MiB, 512 * MiB, 0}; |
| |
| static void aspeed_2400_sdmc_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| AspeedSDMCClass *asc = ASPEED_SDMC_CLASS(klass); |
| |
| dc->desc = "ASPEED 2400 SDRAM Memory Controller"; |
| asc->max_ram_size = 512 * MiB; |
| asc->compute_conf = aspeed_2400_sdmc_compute_conf; |
| asc->write = aspeed_2400_sdmc_write; |
| asc->valid_ram_sizes = aspeed_2400_ram_sizes; |
| } |
| |
| static const TypeInfo aspeed_2400_sdmc_info = { |
| .name = TYPE_ASPEED_2400_SDMC, |
| .parent = TYPE_ASPEED_SDMC, |
| .class_init = aspeed_2400_sdmc_class_init, |
| }; |
| |
| static uint32_t aspeed_2500_sdmc_compute_conf(AspeedSDMCState *s, uint32_t data) |
| { |
| uint32_t fixed_conf = ASPEED_SDMC_HW_VERSION(1) | |
| ASPEED_SDMC_VGA_APERTURE(ASPEED_SDMC_VGA_64MB) | |
| ASPEED_SDMC_CACHE_INITIAL_DONE | |
| ASPEED_SDMC_DRAM_SIZE(aspeed_sdmc_get_ram_bits(s)); |
| |
| /* Make sure readonly bits are kept */ |
| data &= ~ASPEED_SDMC_AST2500_READONLY_MASK; |
| |
| return data | fixed_conf; |
| } |
| |
| static void aspeed_2500_sdmc_write(AspeedSDMCState *s, uint32_t reg, |
| uint32_t data) |
| { |
| if (reg == R_PROT) { |
| s->regs[reg] = |
| (data == PROT_KEY_UNLOCK) ? PROT_UNLOCKED : PROT_SOFTLOCKED; |
| return; |
| } |
| |
| if (!s->regs[R_PROT]) { |
| qemu_log_mask(LOG_GUEST_ERROR, "%s: SDMC is locked!\n", __func__); |
| return; |
| } |
| |
| switch (reg) { |
| case R_CONF: |
| data = aspeed_2500_sdmc_compute_conf(s, data); |
| break; |
| case R_STATUS1: |
| /* Will never return 'busy' */ |
| data &= ~PHY_BUSY_STATE; |
| break; |
| case R_ECC_TEST_CTRL: |
| /* Always done, always happy */ |
| data |= ECC_TEST_FINISHED; |
| data &= ~ECC_TEST_FAIL; |
| break; |
| default: |
| break; |
| } |
| |
| s->regs[reg] = data; |
| } |
| |
| static const uint64_t |
| aspeed_2500_ram_sizes[] = { 128 * MiB, 256 * MiB, 512 * MiB, 1024 * MiB, 0}; |
| |
| static void aspeed_2500_sdmc_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| AspeedSDMCClass *asc = ASPEED_SDMC_CLASS(klass); |
| |
| dc->desc = "ASPEED 2500 SDRAM Memory Controller"; |
| asc->max_ram_size = 1 * GiB; |
| asc->compute_conf = aspeed_2500_sdmc_compute_conf; |
| asc->write = aspeed_2500_sdmc_write; |
| asc->valid_ram_sizes = aspeed_2500_ram_sizes; |
| } |
| |
| static const TypeInfo aspeed_2500_sdmc_info = { |
| .name = TYPE_ASPEED_2500_SDMC, |
| .parent = TYPE_ASPEED_SDMC, |
| .class_init = aspeed_2500_sdmc_class_init, |
| }; |
| |
| static uint32_t aspeed_2600_sdmc_compute_conf(AspeedSDMCState *s, uint32_t data) |
| { |
| uint32_t fixed_conf = ASPEED_SDMC_HW_VERSION(3) | |
| ASPEED_SDMC_VGA_APERTURE(ASPEED_SDMC_VGA_64MB) | |
| ASPEED_SDMC_DRAM_SIZE(aspeed_sdmc_get_ram_bits(s)); |
| |
| /* Make sure readonly bits are kept (use ast2500 mask) */ |
| data &= ~ASPEED_SDMC_AST2500_READONLY_MASK; |
| |
| return data | fixed_conf; |
| } |
| |
| static void aspeed_2600_sdmc_write(AspeedSDMCState *s, uint32_t reg, |
| uint32_t data) |
| { |
| /* Unprotected registers */ |
| switch (reg) { |
| case R_ISR: |
| case R_MCR6C: |
| case R_TEST_START_LEN: |
| case R_TEST_FAIL_DQ: |
| case R_TEST_INIT_VAL: |
| case R_DRAM_SW: |
| case R_DRAM_TIME: |
| case R_ECC_ERR_INJECT: |
| s->regs[reg] = data; |
| return; |
| } |
| |
| if (s->regs[R_PROT] == PROT_HARDLOCKED) { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "%s: SDMC is locked until system reset!\n", |
| __func__); |
| return; |
| } |
| |
| if (reg != R_PROT && s->regs[R_PROT] == PROT_SOFTLOCKED) { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "%s: SDMC is locked! (write to MCR%02x blocked)\n", |
| __func__, reg * 4); |
| return; |
| } |
| |
| switch (reg) { |
| case R_PROT: |
| if (data == PROT_KEY_UNLOCK) { |
| data = PROT_UNLOCKED; |
| } else if (data == PROT_KEY_HARDLOCK) { |
| data = PROT_HARDLOCKED; |
| } else { |
| data = PROT_SOFTLOCKED; |
| } |
| break; |
| case R_CONF: |
| data = aspeed_2600_sdmc_compute_conf(s, data); |
| break; |
| case R_STATUS1: |
| /* Will never return 'busy'. 'lock status' is always set */ |
| data &= ~PHY_BUSY_STATE; |
| data |= PHY_PLL_LOCK_STATUS; |
| break; |
| case R_ECC_TEST_CTRL: |
| /* Always done, always happy */ |
| data |= ECC_TEST_FINISHED; |
| data &= ~ECC_TEST_FAIL; |
| break; |
| default: |
| break; |
| } |
| |
| s->regs[reg] = data; |
| } |
| |
| static const uint64_t |
| aspeed_2600_ram_sizes[] = { 256 * MiB, 512 * MiB, 1024 * MiB, 2048 * MiB, 0}; |
| |
| static void aspeed_2600_sdmc_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| AspeedSDMCClass *asc = ASPEED_SDMC_CLASS(klass); |
| |
| dc->desc = "ASPEED 2600 SDRAM Memory Controller"; |
| asc->max_ram_size = 2 * GiB; |
| asc->compute_conf = aspeed_2600_sdmc_compute_conf; |
| asc->write = aspeed_2600_sdmc_write; |
| asc->valid_ram_sizes = aspeed_2600_ram_sizes; |
| } |
| |
| static const TypeInfo aspeed_2600_sdmc_info = { |
| .name = TYPE_ASPEED_2600_SDMC, |
| .parent = TYPE_ASPEED_SDMC, |
| .class_init = aspeed_2600_sdmc_class_init, |
| }; |
| |
| static void aspeed_2700_sdmc_reset(DeviceState *dev) |
| { |
| AspeedSDMCState *s = ASPEED_SDMC(dev); |
| AspeedSDMCClass *asc = ASPEED_SDMC_GET_CLASS(s); |
| |
| memset(s->regs, 0, sizeof(s->regs)); |
| |
| /* Set ram size bit and defaults values */ |
| s->regs[R_MAIN_CONF] = asc->compute_conf(s, 0); |
| |
| if (s->unlocked) { |
| s->regs[R_2700_PROT] = PROT_UNLOCKED; |
| } |
| } |
| |
| static uint32_t aspeed_2700_sdmc_compute_conf(AspeedSDMCState *s, uint32_t data) |
| { |
| uint32_t fixed_conf = ASPEED_SDMC_AST2700_PAGE_MATCHING_ENABLE | |
| ASPEED_SDMC_AST2700_DRAM_SIZE(aspeed_sdmc_get_ram_bits(s)); |
| |
| /* Make sure readonly bits are kept */ |
| data &= ~ASPEED_SDMC_AST2700_READONLY_MASK; |
| |
| return data | fixed_conf; |
| } |
| |
| static void aspeed_2700_sdmc_write(AspeedSDMCState *s, uint32_t reg, |
| uint32_t data) |
| { |
| /* Unprotected registers */ |
| switch (reg) { |
| case R_INT_STATUS: |
| case R_INT_CLEAR: |
| case R_INT_MASK: |
| case R_ERR_STATUS: |
| case R_ECC_FAIL_STATUS: |
| case R_ECC_FAIL_ADDR: |
| case R_PROT_REGION_LOCK_STATUS: |
| case R_TEST_FAIL_ADDR: |
| case R_TEST_FAIL_D0: |
| case R_TEST_FAIL_D1: |
| case R_TEST_FAIL_D2: |
| case R_TEST_FAIL_D3: |
| case R_DBG_STATUS: |
| case R_PHY_INTERFACE_STATUS: |
| case R_GRAPHIC_MEM_BASE_ADDR: |
| case R_PORT0_INTERFACE_MONITOR0: |
| case R_PORT0_INTERFACE_MONITOR1: |
| case R_PORT0_INTERFACE_MONITOR2: |
| case R_PORT1_INTERFACE_MONITOR0: |
| case R_PORT1_INTERFACE_MONITOR1: |
| case R_PORT1_INTERFACE_MONITOR2: |
| case R_PORT2_INTERFACE_MONITOR0: |
| case R_PORT2_INTERFACE_MONITOR1: |
| case R_PORT2_INTERFACE_MONITOR2: |
| case R_PORT3_INTERFACE_MONITOR0: |
| case R_PORT3_INTERFACE_MONITOR1: |
| case R_PORT3_INTERFACE_MONITOR2: |
| case R_PORT4_INTERFACE_MONITOR0: |
| case R_PORT4_INTERFACE_MONITOR1: |
| case R_PORT4_INTERFACE_MONITOR2: |
| case R_PORT5_INTERFACE_MONITOR0: |
| case R_PORT5_INTERFACE_MONITOR1: |
| case R_PORT5_INTERFACE_MONITOR2: |
| s->regs[reg] = data; |
| return; |
| } |
| |
| if (s->regs[R_2700_PROT] == PROT_HARDLOCKED) { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "%s: SDMC is locked until system reset!\n", |
| __func__); |
| return; |
| } |
| |
| if (reg != R_2700_PROT && s->regs[R_2700_PROT] == PROT_SOFTLOCKED) { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "%s: SDMC is locked! (write to MCR%02x blocked)\n", |
| __func__, reg * 4); |
| return; |
| } |
| |
| switch (reg) { |
| case R_2700_PROT: |
| if (data == PROT_2700_KEY_UNLOCK) { |
| data = PROT_UNLOCKED; |
| } else if (data == PROT_KEY_HARDLOCK) { |
| data = PROT_HARDLOCKED; |
| } else { |
| data = PROT_SOFTLOCKED; |
| } |
| break; |
| case R_MAIN_CONF: |
| data = aspeed_2700_sdmc_compute_conf(s, data); |
| break; |
| case R_MAIN_STATUS: |
| /* Will never return 'busy'. */ |
| data &= ~PHY_BUSY_STATE; |
| break; |
| default: |
| break; |
| } |
| |
| s->regs[reg] = data; |
| } |
| |
| static const uint64_t |
| aspeed_2700_ram_sizes[] = { 256 * MiB, 512 * MiB, 1024 * MiB, |
| 2048 * MiB, 4096 * MiB, 8192 * MiB, 0}; |
| |
| static void aspeed_2700_sdmc_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| AspeedSDMCClass *asc = ASPEED_SDMC_CLASS(klass); |
| |
| dc->desc = "ASPEED 2700 SDRAM Memory Controller"; |
| dc->reset = aspeed_2700_sdmc_reset; |
| |
| asc->is_bus64bit = true; |
| asc->max_ram_size = 8 * GiB; |
| asc->compute_conf = aspeed_2700_sdmc_compute_conf; |
| asc->write = aspeed_2700_sdmc_write; |
| asc->valid_ram_sizes = aspeed_2700_ram_sizes; |
| } |
| |
| static const TypeInfo aspeed_2700_sdmc_info = { |
| .name = TYPE_ASPEED_2700_SDMC, |
| .parent = TYPE_ASPEED_SDMC, |
| .class_init = aspeed_2700_sdmc_class_init, |
| }; |
| |
| static void aspeed_sdmc_register_types(void) |
| { |
| type_register_static(&aspeed_sdmc_info); |
| type_register_static(&aspeed_2400_sdmc_info); |
| type_register_static(&aspeed_2500_sdmc_info); |
| type_register_static(&aspeed_2600_sdmc_info); |
| type_register_static(&aspeed_2700_sdmc_info); |
| } |
| |
| type_init(aspeed_sdmc_register_types); |
