| /* |
| * Nuvoton NPCM7xx Clock Control Registers. |
| * |
| * Copyright 2020 Google LLC |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * for more details. |
| */ |
| |
| #include "qemu/osdep.h" |
| |
| #include "hw/misc/npcm7xx_clk.h" |
| #include "hw/timer/npcm7xx_timer.h" |
| #include "hw/qdev-clock.h" |
| #include "migration/vmstate.h" |
| #include "qemu/error-report.h" |
| #include "qemu/log.h" |
| #include "qemu/module.h" |
| #include "qemu/timer.h" |
| #include "qemu/units.h" |
| #include "trace.h" |
| #include "sysemu/watchdog.h" |
| |
| /* |
| * The reference clock hz, and the SECCNT and CNTR25M registers in this module, |
| * is always 25 MHz. |
| */ |
| #define NPCM7XX_CLOCK_REF_HZ (25000000) |
| |
| /* Register Field Definitions */ |
| #define NPCM7XX_CLK_WDRCR_CA9C BIT(0) /* Cortex A9 Cores */ |
| |
| #define PLLCON_LOKI BIT(31) |
| #define PLLCON_LOKS BIT(30) |
| #define PLLCON_PWDEN BIT(12) |
| #define PLLCON_FBDV(con) extract32((con), 16, 12) |
| #define PLLCON_OTDV2(con) extract32((con), 13, 3) |
| #define PLLCON_OTDV1(con) extract32((con), 8, 3) |
| #define PLLCON_INDV(con) extract32((con), 0, 6) |
| |
| enum NPCM7xxCLKRegisters { |
| NPCM7XX_CLK_CLKEN1, |
| NPCM7XX_CLK_CLKSEL, |
| NPCM7XX_CLK_CLKDIV1, |
| NPCM7XX_CLK_PLLCON0, |
| NPCM7XX_CLK_PLLCON1, |
| NPCM7XX_CLK_SWRSTR, |
| NPCM7XX_CLK_IPSRST1 = 0x20 / sizeof(uint32_t), |
| NPCM7XX_CLK_IPSRST2, |
| NPCM7XX_CLK_CLKEN2, |
| NPCM7XX_CLK_CLKDIV2, |
| NPCM7XX_CLK_CLKEN3, |
| NPCM7XX_CLK_IPSRST3, |
| NPCM7XX_CLK_WD0RCR, |
| NPCM7XX_CLK_WD1RCR, |
| NPCM7XX_CLK_WD2RCR, |
| NPCM7XX_CLK_SWRSTC1, |
| NPCM7XX_CLK_SWRSTC2, |
| NPCM7XX_CLK_SWRSTC3, |
| NPCM7XX_CLK_SWRSTC4, |
| NPCM7XX_CLK_PLLCON2, |
| NPCM7XX_CLK_CLKDIV3, |
| NPCM7XX_CLK_CORSTC, |
| NPCM7XX_CLK_PLLCONG, |
| NPCM7XX_CLK_AHBCKFI, |
| NPCM7XX_CLK_SECCNT, |
| NPCM7XX_CLK_CNTR25M, |
| NPCM7XX_CLK_REGS_END, |
| }; |
| |
| /* |
| * These reset values were taken from version 0.91 of the NPCM750R data sheet. |
| * |
| * All are loaded on power-up reset. CLKENx and SWRSTR should also be loaded on |
| * core domain reset, but this reset type is not yet supported by QEMU. |
| */ |
| static const uint32_t cold_reset_values[NPCM7XX_CLK_NR_REGS] = { |
| [NPCM7XX_CLK_CLKEN1] = 0xffffffff, |
| [NPCM7XX_CLK_CLKSEL] = 0x004aaaaa, |
| [NPCM7XX_CLK_CLKDIV1] = 0x5413f855, |
| [NPCM7XX_CLK_PLLCON0] = 0x00222101 | PLLCON_LOKI, |
| [NPCM7XX_CLK_PLLCON1] = 0x00202101 | PLLCON_LOKI, |
| [NPCM7XX_CLK_IPSRST1] = 0x00001000, |
| [NPCM7XX_CLK_IPSRST2] = 0x80000000, |
| [NPCM7XX_CLK_CLKEN2] = 0xffffffff, |
| [NPCM7XX_CLK_CLKDIV2] = 0xaa4f8f9f, |
| [NPCM7XX_CLK_CLKEN3] = 0xffffffff, |
| [NPCM7XX_CLK_IPSRST3] = 0x03000000, |
| [NPCM7XX_CLK_WD0RCR] = 0xffffffff, |
| [NPCM7XX_CLK_WD1RCR] = 0xffffffff, |
| [NPCM7XX_CLK_WD2RCR] = 0xffffffff, |
| [NPCM7XX_CLK_SWRSTC1] = 0x00000003, |
| [NPCM7XX_CLK_PLLCON2] = 0x00c02105 | PLLCON_LOKI, |
| [NPCM7XX_CLK_CORSTC] = 0x04000003, |
| [NPCM7XX_CLK_PLLCONG] = 0x01228606 | PLLCON_LOKI, |
| [NPCM7XX_CLK_AHBCKFI] = 0x000000c8, |
| }; |
| |
| /* The number of watchdogs that can trigger a reset. */ |
| #define NPCM7XX_NR_WATCHDOGS (3) |
| |
| /* Clock converter functions */ |
| |
| #define TYPE_NPCM7XX_CLOCK_PLL "npcm7xx-clock-pll" |
| #define NPCM7XX_CLOCK_PLL(obj) OBJECT_CHECK(NPCM7xxClockPLLState, \ |
| (obj), TYPE_NPCM7XX_CLOCK_PLL) |
| #define TYPE_NPCM7XX_CLOCK_SEL "npcm7xx-clock-sel" |
| #define NPCM7XX_CLOCK_SEL(obj) OBJECT_CHECK(NPCM7xxClockSELState, \ |
| (obj), TYPE_NPCM7XX_CLOCK_SEL) |
| #define TYPE_NPCM7XX_CLOCK_DIVIDER "npcm7xx-clock-divider" |
| #define NPCM7XX_CLOCK_DIVIDER(obj) OBJECT_CHECK(NPCM7xxClockDividerState, \ |
| (obj), TYPE_NPCM7XX_CLOCK_DIVIDER) |
| |
| static void npcm7xx_clk_update_pll(void *opaque) |
| { |
| NPCM7xxClockPLLState *s = opaque; |
| uint32_t con = s->clk->regs[s->reg]; |
| uint64_t freq; |
| |
| /* The PLL is grounded if it is not locked yet. */ |
| if (con & PLLCON_LOKI) { |
| freq = clock_get_hz(s->clock_in); |
| freq *= PLLCON_FBDV(con); |
| freq /= PLLCON_INDV(con) * PLLCON_OTDV1(con) * PLLCON_OTDV2(con); |
| } else { |
| freq = 0; |
| } |
| |
| clock_update_hz(s->clock_out, freq); |
| } |
| |
| static void npcm7xx_clk_update_sel(void *opaque) |
| { |
| NPCM7xxClockSELState *s = opaque; |
| uint32_t index = extract32(s->clk->regs[NPCM7XX_CLK_CLKSEL], s->offset, |
| s->len); |
| |
| if (index >= s->input_size) { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "%s: SEL index: %u out of range\n", |
| __func__, index); |
| index = 0; |
| } |
| clock_update_hz(s->clock_out, clock_get_hz(s->clock_in[index])); |
| } |
| |
| static void npcm7xx_clk_update_divider(void *opaque) |
| { |
| NPCM7xxClockDividerState *s = opaque; |
| uint32_t freq; |
| |
| freq = s->divide(s); |
| clock_update_hz(s->clock_out, freq); |
| } |
| |
| static uint32_t divide_by_constant(NPCM7xxClockDividerState *s) |
| { |
| return clock_get_hz(s->clock_in) / s->divisor; |
| } |
| |
| static uint32_t divide_by_reg_divisor(NPCM7xxClockDividerState *s) |
| { |
| return clock_get_hz(s->clock_in) / |
| (extract32(s->clk->regs[s->reg], s->offset, s->len) + 1); |
| } |
| |
| static uint32_t divide_by_reg_divisor_times_2(NPCM7xxClockDividerState *s) |
| { |
| return divide_by_reg_divisor(s) / 2; |
| } |
| |
| static uint32_t shift_by_reg_divisor(NPCM7xxClockDividerState *s) |
| { |
| return clock_get_hz(s->clock_in) >> |
| extract32(s->clk->regs[s->reg], s->offset, s->len); |
| } |
| |
| static NPCM7xxClockPLL find_pll_by_reg(enum NPCM7xxCLKRegisters reg) |
| { |
| switch (reg) { |
| case NPCM7XX_CLK_PLLCON0: |
| return NPCM7XX_CLOCK_PLL0; |
| case NPCM7XX_CLK_PLLCON1: |
| return NPCM7XX_CLOCK_PLL1; |
| case NPCM7XX_CLK_PLLCON2: |
| return NPCM7XX_CLOCK_PLL2; |
| case NPCM7XX_CLK_PLLCONG: |
| return NPCM7XX_CLOCK_PLLG; |
| default: |
| g_assert_not_reached(); |
| } |
| } |
| |
| static void npcm7xx_clk_update_all_plls(NPCM7xxCLKState *clk) |
| { |
| int i; |
| |
| for (i = 0; i < NPCM7XX_CLOCK_NR_PLLS; ++i) { |
| npcm7xx_clk_update_pll(&clk->plls[i]); |
| } |
| } |
| |
| static void npcm7xx_clk_update_all_sels(NPCM7xxCLKState *clk) |
| { |
| int i; |
| |
| for (i = 0; i < NPCM7XX_CLOCK_NR_SELS; ++i) { |
| npcm7xx_clk_update_sel(&clk->sels[i]); |
| } |
| } |
| |
| static void npcm7xx_clk_update_all_dividers(NPCM7xxCLKState *clk) |
| { |
| int i; |
| |
| for (i = 0; i < NPCM7XX_CLOCK_NR_DIVIDERS; ++i) { |
| npcm7xx_clk_update_divider(&clk->dividers[i]); |
| } |
| } |
| |
| static void npcm7xx_clk_update_all_clocks(NPCM7xxCLKState *clk) |
| { |
| clock_update_hz(clk->clkref, NPCM7XX_CLOCK_REF_HZ); |
| npcm7xx_clk_update_all_plls(clk); |
| npcm7xx_clk_update_all_sels(clk); |
| npcm7xx_clk_update_all_dividers(clk); |
| } |
| |
| /* Types of clock sources. */ |
| typedef enum ClockSrcType { |
| CLKSRC_REF, |
| CLKSRC_PLL, |
| CLKSRC_SEL, |
| CLKSRC_DIV, |
| } ClockSrcType; |
| |
| typedef struct PLLInitInfo { |
| const char *name; |
| ClockSrcType src_type; |
| int src_index; |
| int reg; |
| const char *public_name; |
| } PLLInitInfo; |
| |
| typedef struct SELInitInfo { |
| const char *name; |
| uint8_t input_size; |
| ClockSrcType src_type[NPCM7XX_CLK_SEL_MAX_INPUT]; |
| int src_index[NPCM7XX_CLK_SEL_MAX_INPUT]; |
| int offset; |
| int len; |
| const char *public_name; |
| } SELInitInfo; |
| |
| typedef struct DividerInitInfo { |
| const char *name; |
| ClockSrcType src_type; |
| int src_index; |
| uint32_t (*divide)(NPCM7xxClockDividerState *s); |
| int reg; /* not used when type == CONSTANT */ |
| int offset; /* not used when type == CONSTANT */ |
| int len; /* not used when type == CONSTANT */ |
| int divisor; /* used only when type == CONSTANT */ |
| const char *public_name; |
| } DividerInitInfo; |
| |
| static const PLLInitInfo pll_init_info_list[] = { |
| [NPCM7XX_CLOCK_PLL0] = { |
| .name = "pll0", |
| .src_type = CLKSRC_REF, |
| .reg = NPCM7XX_CLK_PLLCON0, |
| }, |
| [NPCM7XX_CLOCK_PLL1] = { |
| .name = "pll1", |
| .src_type = CLKSRC_REF, |
| .reg = NPCM7XX_CLK_PLLCON1, |
| }, |
| [NPCM7XX_CLOCK_PLL2] = { |
| .name = "pll2", |
| .src_type = CLKSRC_REF, |
| .reg = NPCM7XX_CLK_PLLCON2, |
| }, |
| [NPCM7XX_CLOCK_PLLG] = { |
| .name = "pllg", |
| .src_type = CLKSRC_REF, |
| .reg = NPCM7XX_CLK_PLLCONG, |
| }, |
| }; |
| |
| static const SELInitInfo sel_init_info_list[] = { |
| [NPCM7XX_CLOCK_PIXCKSEL] = { |
| .name = "pixcksel", |
| .input_size = 2, |
| .src_type = {CLKSRC_PLL, CLKSRC_REF}, |
| .src_index = {NPCM7XX_CLOCK_PLLG, 0}, |
| .offset = 5, |
| .len = 1, |
| .public_name = "pixel-clock", |
| }, |
| [NPCM7XX_CLOCK_MCCKSEL] = { |
| .name = "mccksel", |
| .input_size = 4, |
| .src_type = {CLKSRC_DIV, CLKSRC_REF, CLKSRC_REF, |
| /*MCBPCK, shouldn't be used in normal operation*/ |
| CLKSRC_REF}, |
| .src_index = {NPCM7XX_CLOCK_PLL1D2, 0, 0, 0}, |
| .offset = 12, |
| .len = 2, |
| .public_name = "mc-phy-clock", |
| }, |
| [NPCM7XX_CLOCK_CPUCKSEL] = { |
| .name = "cpucksel", |
| .input_size = 4, |
| .src_type = {CLKSRC_PLL, CLKSRC_DIV, CLKSRC_REF, |
| /*SYSBPCK, shouldn't be used in normal operation*/ |
| CLKSRC_REF}, |
| .src_index = {NPCM7XX_CLOCK_PLL0, NPCM7XX_CLOCK_PLL1D2, 0, 0}, |
| .offset = 0, |
| .len = 2, |
| .public_name = "system-clock", |
| }, |
| [NPCM7XX_CLOCK_CLKOUTSEL] = { |
| .name = "clkoutsel", |
| .input_size = 5, |
| .src_type = {CLKSRC_PLL, CLKSRC_DIV, CLKSRC_REF, |
| CLKSRC_PLL, CLKSRC_DIV}, |
| .src_index = {NPCM7XX_CLOCK_PLL0, NPCM7XX_CLOCK_PLL1D2, 0, |
| NPCM7XX_CLOCK_PLLG, NPCM7XX_CLOCK_PLL2D2}, |
| .offset = 18, |
| .len = 3, |
| .public_name = "tock", |
| }, |
| [NPCM7XX_CLOCK_UARTCKSEL] = { |
| .name = "uartcksel", |
| .input_size = 4, |
| .src_type = {CLKSRC_PLL, CLKSRC_DIV, CLKSRC_REF, CLKSRC_DIV}, |
| .src_index = {NPCM7XX_CLOCK_PLL0, NPCM7XX_CLOCK_PLL1D2, 0, |
| NPCM7XX_CLOCK_PLL2D2}, |
| .offset = 8, |
| .len = 2, |
| }, |
| [NPCM7XX_CLOCK_TIMCKSEL] = { |
| .name = "timcksel", |
| .input_size = 4, |
| .src_type = {CLKSRC_PLL, CLKSRC_DIV, CLKSRC_REF, CLKSRC_DIV}, |
| .src_index = {NPCM7XX_CLOCK_PLL0, NPCM7XX_CLOCK_PLL1D2, 0, |
| NPCM7XX_CLOCK_PLL2D2}, |
| .offset = 14, |
| .len = 2, |
| }, |
| [NPCM7XX_CLOCK_SDCKSEL] = { |
| .name = "sdcksel", |
| .input_size = 4, |
| .src_type = {CLKSRC_PLL, CLKSRC_DIV, CLKSRC_REF, CLKSRC_DIV}, |
| .src_index = {NPCM7XX_CLOCK_PLL0, NPCM7XX_CLOCK_PLL1D2, 0, |
| NPCM7XX_CLOCK_PLL2D2}, |
| .offset = 6, |
| .len = 2, |
| }, |
| [NPCM7XX_CLOCK_GFXMSEL] = { |
| .name = "gfxmksel", |
| .input_size = 2, |
| .src_type = {CLKSRC_REF, CLKSRC_PLL}, |
| .src_index = {0, NPCM7XX_CLOCK_PLL2}, |
| .offset = 21, |
| .len = 1, |
| }, |
| [NPCM7XX_CLOCK_SUCKSEL] = { |
| .name = "sucksel", |
| .input_size = 4, |
| .src_type = {CLKSRC_PLL, CLKSRC_DIV, CLKSRC_REF, CLKSRC_DIV}, |
| .src_index = {NPCM7XX_CLOCK_PLL0, NPCM7XX_CLOCK_PLL1D2, 0, |
| NPCM7XX_CLOCK_PLL2D2}, |
| .offset = 10, |
| .len = 2, |
| }, |
| }; |
| |
| static const DividerInitInfo divider_init_info_list[] = { |
| [NPCM7XX_CLOCK_PLL1D2] = { |
| .name = "pll1d2", |
| .src_type = CLKSRC_PLL, |
| .src_index = NPCM7XX_CLOCK_PLL1, |
| .divide = divide_by_constant, |
| .divisor = 2, |
| }, |
| [NPCM7XX_CLOCK_PLL2D2] = { |
| .name = "pll2d2", |
| .src_type = CLKSRC_PLL, |
| .src_index = NPCM7XX_CLOCK_PLL2, |
| .divide = divide_by_constant, |
| .divisor = 2, |
| }, |
| [NPCM7XX_CLOCK_MC_DIVIDER] = { |
| .name = "mc-divider", |
| .src_type = CLKSRC_SEL, |
| .src_index = NPCM7XX_CLOCK_MCCKSEL, |
| .divide = divide_by_constant, |
| .divisor = 2, |
| .public_name = "mc-clock" |
| }, |
| [NPCM7XX_CLOCK_AXI_DIVIDER] = { |
| .name = "axi-divider", |
| .src_type = CLKSRC_SEL, |
| .src_index = NPCM7XX_CLOCK_CPUCKSEL, |
| .divide = shift_by_reg_divisor, |
| .reg = NPCM7XX_CLK_CLKDIV1, |
| .offset = 0, |
| .len = 1, |
| .public_name = "clk2" |
| }, |
| [NPCM7XX_CLOCK_AHB_DIVIDER] = { |
| .name = "ahb-divider", |
| .src_type = CLKSRC_DIV, |
| .src_index = NPCM7XX_CLOCK_AXI_DIVIDER, |
| .divide = divide_by_reg_divisor, |
| .reg = NPCM7XX_CLK_CLKDIV1, |
| .offset = 26, |
| .len = 2, |
| .public_name = "clk4" |
| }, |
| [NPCM7XX_CLOCK_AHB3_DIVIDER] = { |
| .name = "ahb3-divider", |
| .src_type = CLKSRC_DIV, |
| .src_index = NPCM7XX_CLOCK_AHB_DIVIDER, |
| .divide = divide_by_reg_divisor, |
| .reg = NPCM7XX_CLK_CLKDIV1, |
| .offset = 6, |
| .len = 5, |
| .public_name = "ahb3-spi3-clock" |
| }, |
| [NPCM7XX_CLOCK_SPI0_DIVIDER] = { |
| .name = "spi0-divider", |
| .src_type = CLKSRC_DIV, |
| .src_index = NPCM7XX_CLOCK_AHB_DIVIDER, |
| .divide = divide_by_reg_divisor, |
| .reg = NPCM7XX_CLK_CLKDIV3, |
| .offset = 6, |
| .len = 5, |
| .public_name = "spi0-clock", |
| }, |
| [NPCM7XX_CLOCK_SPIX_DIVIDER] = { |
| .name = "spix-divider", |
| .src_type = CLKSRC_DIV, |
| .src_index = NPCM7XX_CLOCK_AHB_DIVIDER, |
| .divide = divide_by_reg_divisor, |
| .reg = NPCM7XX_CLK_CLKDIV3, |
| .offset = 1, |
| .len = 5, |
| .public_name = "spix-clock", |
| }, |
| [NPCM7XX_CLOCK_APB1_DIVIDER] = { |
| .name = "apb1-divider", |
| .src_type = CLKSRC_DIV, |
| .src_index = NPCM7XX_CLOCK_AHB_DIVIDER, |
| .divide = shift_by_reg_divisor, |
| .reg = NPCM7XX_CLK_CLKDIV2, |
| .offset = 24, |
| .len = 2, |
| .public_name = "apb1-clock", |
| }, |
| [NPCM7XX_CLOCK_APB2_DIVIDER] = { |
| .name = "apb2-divider", |
| .src_type = CLKSRC_DIV, |
| .src_index = NPCM7XX_CLOCK_AHB_DIVIDER, |
| .divide = shift_by_reg_divisor, |
| .reg = NPCM7XX_CLK_CLKDIV2, |
| .offset = 26, |
| .len = 2, |
| .public_name = "apb2-clock", |
| }, |
| [NPCM7XX_CLOCK_APB3_DIVIDER] = { |
| .name = "apb3-divider", |
| .src_type = CLKSRC_DIV, |
| .src_index = NPCM7XX_CLOCK_AHB_DIVIDER, |
| .divide = shift_by_reg_divisor, |
| .reg = NPCM7XX_CLK_CLKDIV2, |
| .offset = 28, |
| .len = 2, |
| .public_name = "apb3-clock", |
| }, |
| [NPCM7XX_CLOCK_APB4_DIVIDER] = { |
| .name = "apb4-divider", |
| .src_type = CLKSRC_DIV, |
| .src_index = NPCM7XX_CLOCK_AHB_DIVIDER, |
| .divide = shift_by_reg_divisor, |
| .reg = NPCM7XX_CLK_CLKDIV2, |
| .offset = 30, |
| .len = 2, |
| .public_name = "apb4-clock", |
| }, |
| [NPCM7XX_CLOCK_APB5_DIVIDER] = { |
| .name = "apb5-divider", |
| .src_type = CLKSRC_DIV, |
| .src_index = NPCM7XX_CLOCK_AHB_DIVIDER, |
| .divide = shift_by_reg_divisor, |
| .reg = NPCM7XX_CLK_CLKDIV2, |
| .offset = 22, |
| .len = 2, |
| .public_name = "apb5-clock", |
| }, |
| [NPCM7XX_CLOCK_CLKOUT_DIVIDER] = { |
| .name = "clkout-divider", |
| .src_type = CLKSRC_SEL, |
| .src_index = NPCM7XX_CLOCK_CLKOUTSEL, |
| .divide = divide_by_reg_divisor, |
| .reg = NPCM7XX_CLK_CLKDIV2, |
| .offset = 16, |
| .len = 5, |
| .public_name = "clkout", |
| }, |
| [NPCM7XX_CLOCK_UART_DIVIDER] = { |
| .name = "uart-divider", |
| .src_type = CLKSRC_SEL, |
| .src_index = NPCM7XX_CLOCK_UARTCKSEL, |
| .divide = divide_by_reg_divisor, |
| .reg = NPCM7XX_CLK_CLKDIV1, |
| .offset = 16, |
| .len = 5, |
| .public_name = "uart-clock", |
| }, |
| [NPCM7XX_CLOCK_TIMER_DIVIDER] = { |
| .name = "timer-divider", |
| .src_type = CLKSRC_SEL, |
| .src_index = NPCM7XX_CLOCK_TIMCKSEL, |
| .divide = divide_by_reg_divisor, |
| .reg = NPCM7XX_CLK_CLKDIV1, |
| .offset = 21, |
| .len = 5, |
| .public_name = "timer-clock", |
| }, |
| [NPCM7XX_CLOCK_ADC_DIVIDER] = { |
| .name = "adc-divider", |
| .src_type = CLKSRC_DIV, |
| .src_index = NPCM7XX_CLOCK_TIMER_DIVIDER, |
| .divide = shift_by_reg_divisor, |
| .reg = NPCM7XX_CLK_CLKDIV1, |
| .offset = 28, |
| .len = 3, |
| .public_name = "adc-clock", |
| }, |
| [NPCM7XX_CLOCK_MMC_DIVIDER] = { |
| .name = "mmc-divider", |
| .src_type = CLKSRC_SEL, |
| .src_index = NPCM7XX_CLOCK_SDCKSEL, |
| .divide = divide_by_reg_divisor, |
| .reg = NPCM7XX_CLK_CLKDIV1, |
| .offset = 11, |
| .len = 5, |
| .public_name = "mmc-clock", |
| }, |
| [NPCM7XX_CLOCK_SDHC_DIVIDER] = { |
| .name = "sdhc-divider", |
| .src_type = CLKSRC_SEL, |
| .src_index = NPCM7XX_CLOCK_SDCKSEL, |
| .divide = divide_by_reg_divisor_times_2, |
| .reg = NPCM7XX_CLK_CLKDIV2, |
| .offset = 0, |
| .len = 4, |
| .public_name = "sdhc-clock", |
| }, |
| [NPCM7XX_CLOCK_GFXM_DIVIDER] = { |
| .name = "gfxm-divider", |
| .src_type = CLKSRC_SEL, |
| .src_index = NPCM7XX_CLOCK_GFXMSEL, |
| .divide = divide_by_constant, |
| .divisor = 3, |
| .public_name = "gfxm-clock", |
| }, |
| [NPCM7XX_CLOCK_UTMI_DIVIDER] = { |
| .name = "utmi-divider", |
| .src_type = CLKSRC_SEL, |
| .src_index = NPCM7XX_CLOCK_SUCKSEL, |
| .divide = divide_by_reg_divisor, |
| .reg = NPCM7XX_CLK_CLKDIV2, |
| .offset = 8, |
| .len = 5, |
| .public_name = "utmi-clock", |
| }, |
| }; |
| |
| static void npcm7xx_clk_pll_init(Object *obj) |
| { |
| NPCM7xxClockPLLState *pll = NPCM7XX_CLOCK_PLL(obj); |
| |
| pll->clock_in = qdev_init_clock_in(DEVICE(pll), "clock-in", |
| npcm7xx_clk_update_pll, pll); |
| pll->clock_out = qdev_init_clock_out(DEVICE(pll), "clock-out"); |
| } |
| |
| static void npcm7xx_clk_sel_init(Object *obj) |
| { |
| int i; |
| NPCM7xxClockSELState *sel = NPCM7XX_CLOCK_SEL(obj); |
| |
| for (i = 0; i < NPCM7XX_CLK_SEL_MAX_INPUT; ++i) { |
| sel->clock_in[i] = qdev_init_clock_in(DEVICE(sel), |
| g_strdup_printf("clock-in[%d]", i), |
| npcm7xx_clk_update_sel, sel); |
| } |
| sel->clock_out = qdev_init_clock_out(DEVICE(sel), "clock-out"); |
| } |
| static void npcm7xx_clk_divider_init(Object *obj) |
| { |
| NPCM7xxClockDividerState *div = NPCM7XX_CLOCK_DIVIDER(obj); |
| |
| div->clock_in = qdev_init_clock_in(DEVICE(div), "clock-in", |
| npcm7xx_clk_update_divider, div); |
| div->clock_out = qdev_init_clock_out(DEVICE(div), "clock-out"); |
| } |
| |
| static void npcm7xx_init_clock_pll(NPCM7xxClockPLLState *pll, |
| NPCM7xxCLKState *clk, const PLLInitInfo *init_info) |
| { |
| pll->name = init_info->name; |
| pll->clk = clk; |
| pll->reg = init_info->reg; |
| if (init_info->public_name != NULL) { |
| qdev_alias_clock(DEVICE(pll), "clock-out", DEVICE(clk), |
| init_info->public_name); |
| } |
| } |
| |
| static void npcm7xx_init_clock_sel(NPCM7xxClockSELState *sel, |
| NPCM7xxCLKState *clk, const SELInitInfo *init_info) |
| { |
| int input_size = init_info->input_size; |
| |
| sel->name = init_info->name; |
| sel->clk = clk; |
| sel->input_size = init_info->input_size; |
| g_assert(input_size <= NPCM7XX_CLK_SEL_MAX_INPUT); |
| sel->offset = init_info->offset; |
| sel->len = init_info->len; |
| if (init_info->public_name != NULL) { |
| qdev_alias_clock(DEVICE(sel), "clock-out", DEVICE(clk), |
| init_info->public_name); |
| } |
| } |
| |
| static void npcm7xx_init_clock_divider(NPCM7xxClockDividerState *div, |
| NPCM7xxCLKState *clk, const DividerInitInfo *init_info) |
| { |
| div->name = init_info->name; |
| div->clk = clk; |
| |
| div->divide = init_info->divide; |
| if (div->divide == divide_by_constant) { |
| div->divisor = init_info->divisor; |
| } else { |
| div->reg = init_info->reg; |
| div->offset = init_info->offset; |
| div->len = init_info->len; |
| } |
| if (init_info->public_name != NULL) { |
| qdev_alias_clock(DEVICE(div), "clock-out", DEVICE(clk), |
| init_info->public_name); |
| } |
| } |
| |
| static Clock *npcm7xx_get_clock(NPCM7xxCLKState *clk, ClockSrcType type, |
| int index) |
| { |
| switch (type) { |
| case CLKSRC_REF: |
| return clk->clkref; |
| case CLKSRC_PLL: |
| return clk->plls[index].clock_out; |
| case CLKSRC_SEL: |
| return clk->sels[index].clock_out; |
| case CLKSRC_DIV: |
| return clk->dividers[index].clock_out; |
| default: |
| g_assert_not_reached(); |
| } |
| } |
| |
| static void npcm7xx_connect_clocks(NPCM7xxCLKState *clk) |
| { |
| int i, j; |
| Clock *src; |
| |
| for (i = 0; i < NPCM7XX_CLOCK_NR_PLLS; ++i) { |
| src = npcm7xx_get_clock(clk, pll_init_info_list[i].src_type, |
| pll_init_info_list[i].src_index); |
| clock_set_source(clk->plls[i].clock_in, src); |
| } |
| for (i = 0; i < NPCM7XX_CLOCK_NR_SELS; ++i) { |
| for (j = 0; j < sel_init_info_list[i].input_size; ++j) { |
| src = npcm7xx_get_clock(clk, sel_init_info_list[i].src_type[j], |
| sel_init_info_list[i].src_index[j]); |
| clock_set_source(clk->sels[i].clock_in[j], src); |
| } |
| } |
| for (i = 0; i < NPCM7XX_CLOCK_NR_DIVIDERS; ++i) { |
| src = npcm7xx_get_clock(clk, divider_init_info_list[i].src_type, |
| divider_init_info_list[i].src_index); |
| clock_set_source(clk->dividers[i].clock_in, src); |
| } |
| } |
| |
| static uint64_t npcm7xx_clk_read(void *opaque, hwaddr offset, unsigned size) |
| { |
| uint32_t reg = offset / sizeof(uint32_t); |
| NPCM7xxCLKState *s = opaque; |
| int64_t now_ns; |
| uint32_t value = 0; |
| |
| if (reg >= NPCM7XX_CLK_NR_REGS) { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "%s: offset 0x%04" HWADDR_PRIx " out of range\n", |
| __func__, offset); |
| return 0; |
| } |
| |
| switch (reg) { |
| case NPCM7XX_CLK_SWRSTR: |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "%s: register @ 0x%04" HWADDR_PRIx " is write-only\n", |
| __func__, offset); |
| break; |
| |
| case NPCM7XX_CLK_SECCNT: |
| now_ns = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); |
| value = (now_ns - s->ref_ns) / NANOSECONDS_PER_SECOND; |
| break; |
| |
| case NPCM7XX_CLK_CNTR25M: |
| now_ns = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); |
| /* |
| * This register counts 25 MHz cycles, updating every 640 ns. It rolls |
| * over to zero every second. |
| * |
| * The 4 LSBs are always zero: (1e9 / 640) << 4 = 25000000. |
| */ |
| value = (((now_ns - s->ref_ns) / 640) << 4) % NPCM7XX_CLOCK_REF_HZ; |
| break; |
| |
| default: |
| value = s->regs[reg]; |
| break; |
| }; |
| |
| trace_npcm7xx_clk_read(offset, value); |
| |
| return value; |
| } |
| |
| static void npcm7xx_clk_write(void *opaque, hwaddr offset, |
| uint64_t v, unsigned size) |
| { |
| uint32_t reg = offset / sizeof(uint32_t); |
| NPCM7xxCLKState *s = opaque; |
| uint32_t value = v; |
| |
| trace_npcm7xx_clk_write(offset, value); |
| |
| if (reg >= NPCM7XX_CLK_NR_REGS) { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "%s: offset 0x%04" HWADDR_PRIx " out of range\n", |
| __func__, offset); |
| return; |
| } |
| |
| switch (reg) { |
| case NPCM7XX_CLK_SWRSTR: |
| qemu_log_mask(LOG_UNIMP, "%s: SW reset not implemented: 0x%02x\n", |
| __func__, value); |
| value = 0; |
| break; |
| |
| case NPCM7XX_CLK_PLLCON0: |
| case NPCM7XX_CLK_PLLCON1: |
| case NPCM7XX_CLK_PLLCON2: |
| case NPCM7XX_CLK_PLLCONG: |
| if (value & PLLCON_PWDEN) { |
| /* Power down -- clear lock and indicate loss of lock */ |
| value &= ~PLLCON_LOKI; |
| value |= PLLCON_LOKS; |
| } else { |
| /* Normal mode -- assume always locked */ |
| value |= PLLCON_LOKI; |
| /* Keep LOKS unchanged unless cleared by writing 1 */ |
| if (value & PLLCON_LOKS) { |
| value &= ~PLLCON_LOKS; |
| } else { |
| value |= (value & PLLCON_LOKS); |
| } |
| } |
| /* Only update PLL when it is locked. */ |
| if (value & PLLCON_LOKI) { |
| npcm7xx_clk_update_pll(&s->plls[find_pll_by_reg(reg)]); |
| } |
| break; |
| |
| case NPCM7XX_CLK_CLKSEL: |
| npcm7xx_clk_update_all_sels(s); |
| break; |
| |
| case NPCM7XX_CLK_CLKDIV1: |
| case NPCM7XX_CLK_CLKDIV2: |
| case NPCM7XX_CLK_CLKDIV3: |
| npcm7xx_clk_update_all_dividers(s); |
| break; |
| |
| case NPCM7XX_CLK_CNTR25M: |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "%s: register @ 0x%04" HWADDR_PRIx " is read-only\n", |
| __func__, offset); |
| return; |
| } |
| |
| s->regs[reg] = value; |
| } |
| |
| /* Perform reset action triggered by a watchdog */ |
| static void npcm7xx_clk_perform_watchdog_reset(void *opaque, int n, |
| int level) |
| { |
| NPCM7xxCLKState *clk = NPCM7XX_CLK(opaque); |
| uint32_t rcr; |
| |
| g_assert(n >= 0 && n <= NPCM7XX_NR_WATCHDOGS); |
| rcr = clk->regs[NPCM7XX_CLK_WD0RCR + n]; |
| if (rcr & NPCM7XX_CLK_WDRCR_CA9C) { |
| watchdog_perform_action(); |
| } else { |
| qemu_log_mask(LOG_UNIMP, |
| "%s: only CPU reset is implemented. (requested 0x%" PRIx32")\n", |
| __func__, rcr); |
| } |
| } |
| |
| static const struct MemoryRegionOps npcm7xx_clk_ops = { |
| .read = npcm7xx_clk_read, |
| .write = npcm7xx_clk_write, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| .valid = { |
| .min_access_size = 4, |
| .max_access_size = 4, |
| .unaligned = false, |
| }, |
| }; |
| |
| static void npcm7xx_clk_enter_reset(Object *obj, ResetType type) |
| { |
| NPCM7xxCLKState *s = NPCM7XX_CLK(obj); |
| |
| QEMU_BUILD_BUG_ON(sizeof(s->regs) != sizeof(cold_reset_values)); |
| |
| switch (type) { |
| case RESET_TYPE_COLD: |
| memcpy(s->regs, cold_reset_values, sizeof(cold_reset_values)); |
| s->ref_ns = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL); |
| npcm7xx_clk_update_all_clocks(s); |
| return; |
| } |
| |
| /* |
| * A small number of registers need to be reset on a core domain reset, |
| * but no such reset type exists yet. |
| */ |
| qemu_log_mask(LOG_UNIMP, "%s: reset type %d not implemented.", |
| __func__, type); |
| } |
| |
| static void npcm7xx_clk_init_clock_hierarchy(NPCM7xxCLKState *s) |
| { |
| int i; |
| |
| s->clkref = qdev_init_clock_in(DEVICE(s), "clkref", NULL, NULL); |
| |
| /* First pass: init all converter modules */ |
| QEMU_BUILD_BUG_ON(ARRAY_SIZE(pll_init_info_list) != NPCM7XX_CLOCK_NR_PLLS); |
| QEMU_BUILD_BUG_ON(ARRAY_SIZE(sel_init_info_list) != NPCM7XX_CLOCK_NR_SELS); |
| QEMU_BUILD_BUG_ON(ARRAY_SIZE(divider_init_info_list) |
| != NPCM7XX_CLOCK_NR_DIVIDERS); |
| for (i = 0; i < NPCM7XX_CLOCK_NR_PLLS; ++i) { |
| object_initialize_child(OBJECT(s), pll_init_info_list[i].name, |
| &s->plls[i], TYPE_NPCM7XX_CLOCK_PLL); |
| npcm7xx_init_clock_pll(&s->plls[i], s, |
| &pll_init_info_list[i]); |
| } |
| for (i = 0; i < NPCM7XX_CLOCK_NR_SELS; ++i) { |
| object_initialize_child(OBJECT(s), sel_init_info_list[i].name, |
| &s->sels[i], TYPE_NPCM7XX_CLOCK_SEL); |
| npcm7xx_init_clock_sel(&s->sels[i], s, |
| &sel_init_info_list[i]); |
| } |
| for (i = 0; i < NPCM7XX_CLOCK_NR_DIVIDERS; ++i) { |
| object_initialize_child(OBJECT(s), divider_init_info_list[i].name, |
| &s->dividers[i], TYPE_NPCM7XX_CLOCK_DIVIDER); |
| npcm7xx_init_clock_divider(&s->dividers[i], s, |
| ÷r_init_info_list[i]); |
| } |
| |
| /* Second pass: connect converter modules */ |
| npcm7xx_connect_clocks(s); |
| |
| clock_update_hz(s->clkref, NPCM7XX_CLOCK_REF_HZ); |
| } |
| |
| static void npcm7xx_clk_init(Object *obj) |
| { |
| NPCM7xxCLKState *s = NPCM7XX_CLK(obj); |
| |
| memory_region_init_io(&s->iomem, obj, &npcm7xx_clk_ops, s, |
| TYPE_NPCM7XX_CLK, 4 * KiB); |
| sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem); |
| } |
| |
| static int npcm7xx_clk_post_load(void *opaque, int version_id) |
| { |
| if (version_id >= 1) { |
| NPCM7xxCLKState *clk = opaque; |
| |
| npcm7xx_clk_update_all_clocks(clk); |
| } |
| |
| return 0; |
| } |
| |
| static void npcm7xx_clk_realize(DeviceState *dev, Error **errp) |
| { |
| int i; |
| NPCM7xxCLKState *s = NPCM7XX_CLK(dev); |
| |
| qdev_init_gpio_in_named(DEVICE(s), npcm7xx_clk_perform_watchdog_reset, |
| NPCM7XX_WATCHDOG_RESET_GPIO_IN, NPCM7XX_NR_WATCHDOGS); |
| npcm7xx_clk_init_clock_hierarchy(s); |
| |
| /* Realize child devices */ |
| for (i = 0; i < NPCM7XX_CLOCK_NR_PLLS; ++i) { |
| if (!qdev_realize(DEVICE(&s->plls[i]), NULL, errp)) { |
| return; |
| } |
| } |
| for (i = 0; i < NPCM7XX_CLOCK_NR_SELS; ++i) { |
| if (!qdev_realize(DEVICE(&s->sels[i]), NULL, errp)) { |
| return; |
| } |
| } |
| for (i = 0; i < NPCM7XX_CLOCK_NR_DIVIDERS; ++i) { |
| if (!qdev_realize(DEVICE(&s->dividers[i]), NULL, errp)) { |
| return; |
| } |
| } |
| } |
| |
| static const VMStateDescription vmstate_npcm7xx_clk_pll = { |
| .name = "npcm7xx-clock-pll", |
| .version_id = 0, |
| .minimum_version_id = 0, |
| .fields = (VMStateField[]) { |
| VMSTATE_CLOCK(clock_in, NPCM7xxClockPLLState), |
| VMSTATE_END_OF_LIST(), |
| }, |
| }; |
| |
| static const VMStateDescription vmstate_npcm7xx_clk_sel = { |
| .name = "npcm7xx-clock-sel", |
| .version_id = 0, |
| .minimum_version_id = 0, |
| .fields = (VMStateField[]) { |
| VMSTATE_ARRAY_OF_POINTER_TO_STRUCT(clock_in, NPCM7xxClockSELState, |
| NPCM7XX_CLK_SEL_MAX_INPUT, 0, vmstate_clock, Clock), |
| VMSTATE_END_OF_LIST(), |
| }, |
| }; |
| |
| static const VMStateDescription vmstate_npcm7xx_clk_divider = { |
| .name = "npcm7xx-clock-divider", |
| .version_id = 0, |
| .minimum_version_id = 0, |
| .fields = (VMStateField[]) { |
| VMSTATE_CLOCK(clock_in, NPCM7xxClockDividerState), |
| VMSTATE_END_OF_LIST(), |
| }, |
| }; |
| |
| static const VMStateDescription vmstate_npcm7xx_clk = { |
| .name = "npcm7xx-clk", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .post_load = npcm7xx_clk_post_load, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT32_ARRAY(regs, NPCM7xxCLKState, NPCM7XX_CLK_NR_REGS), |
| VMSTATE_INT64(ref_ns, NPCM7xxCLKState), |
| VMSTATE_CLOCK(clkref, NPCM7xxCLKState), |
| VMSTATE_END_OF_LIST(), |
| }, |
| }; |
| |
| static void npcm7xx_clk_pll_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| dc->desc = "NPCM7xx Clock PLL Module"; |
| dc->vmsd = &vmstate_npcm7xx_clk_pll; |
| } |
| |
| static void npcm7xx_clk_sel_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| dc->desc = "NPCM7xx Clock SEL Module"; |
| dc->vmsd = &vmstate_npcm7xx_clk_sel; |
| } |
| |
| static void npcm7xx_clk_divider_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| dc->desc = "NPCM7xx Clock Divider Module"; |
| dc->vmsd = &vmstate_npcm7xx_clk_divider; |
| } |
| |
| static void npcm7xx_clk_class_init(ObjectClass *klass, void *data) |
| { |
| ResettableClass *rc = RESETTABLE_CLASS(klass); |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| QEMU_BUILD_BUG_ON(NPCM7XX_CLK_REGS_END > NPCM7XX_CLK_NR_REGS); |
| |
| dc->desc = "NPCM7xx Clock Control Registers"; |
| dc->vmsd = &vmstate_npcm7xx_clk; |
| dc->realize = npcm7xx_clk_realize; |
| rc->phases.enter = npcm7xx_clk_enter_reset; |
| } |
| |
| static const TypeInfo npcm7xx_clk_pll_info = { |
| .name = TYPE_NPCM7XX_CLOCK_PLL, |
| .parent = TYPE_DEVICE, |
| .instance_size = sizeof(NPCM7xxClockPLLState), |
| .instance_init = npcm7xx_clk_pll_init, |
| .class_init = npcm7xx_clk_pll_class_init, |
| }; |
| |
| static const TypeInfo npcm7xx_clk_sel_info = { |
| .name = TYPE_NPCM7XX_CLOCK_SEL, |
| .parent = TYPE_DEVICE, |
| .instance_size = sizeof(NPCM7xxClockSELState), |
| .instance_init = npcm7xx_clk_sel_init, |
| .class_init = npcm7xx_clk_sel_class_init, |
| }; |
| |
| static const TypeInfo npcm7xx_clk_divider_info = { |
| .name = TYPE_NPCM7XX_CLOCK_DIVIDER, |
| .parent = TYPE_DEVICE, |
| .instance_size = sizeof(NPCM7xxClockDividerState), |
| .instance_init = npcm7xx_clk_divider_init, |
| .class_init = npcm7xx_clk_divider_class_init, |
| }; |
| |
| static const TypeInfo npcm7xx_clk_info = { |
| .name = TYPE_NPCM7XX_CLK, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(NPCM7xxCLKState), |
| .instance_init = npcm7xx_clk_init, |
| .class_init = npcm7xx_clk_class_init, |
| }; |
| |
| static void npcm7xx_clk_register_type(void) |
| { |
| type_register_static(&npcm7xx_clk_pll_info); |
| type_register_static(&npcm7xx_clk_sel_info); |
| type_register_static(&npcm7xx_clk_divider_info); |
| type_register_static(&npcm7xx_clk_info); |
| } |
| type_init(npcm7xx_clk_register_type); |