| /* |
| * Logging support |
| * |
| * Copyright (c) 2003 Fabrice Bellard |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2.1 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu/log.h" |
| #include "qemu/range.h" |
| #include "qemu/error-report.h" |
| #include "qapi/error.h" |
| #include "qemu/cutils.h" |
| #include "trace/control.h" |
| #include "qemu/thread.h" |
| #include "qemu/lockable.h" |
| |
| static char *logfilename; |
| static QemuMutex qemu_logfile_mutex; |
| QemuLogFile *qemu_logfile; |
| int qemu_loglevel; |
| static int log_append = 0; |
| static GArray *debug_regions; |
| |
| /* Lock/unlock output. */ |
| |
| FILE *qemu_log_trylock(void) |
| { |
| QemuLogFile *logfile; |
| |
| rcu_read_lock(); |
| logfile = qatomic_rcu_read(&qemu_logfile); |
| if (logfile) { |
| qemu_flockfile(logfile->fd); |
| return logfile->fd; |
| } else { |
| rcu_read_unlock(); |
| return NULL; |
| } |
| } |
| |
| void qemu_log_unlock(FILE *fd) |
| { |
| if (fd) { |
| qemu_funlockfile(fd); |
| rcu_read_unlock(); |
| } |
| } |
| |
| /* Return the number of characters emitted. */ |
| int qemu_log(const char *fmt, ...) |
| { |
| int ret = 0; |
| QemuLogFile *logfile; |
| |
| rcu_read_lock(); |
| logfile = qatomic_rcu_read(&qemu_logfile); |
| if (logfile) { |
| va_list ap; |
| va_start(ap, fmt); |
| ret = vfprintf(logfile->fd, fmt, ap); |
| va_end(ap); |
| |
| /* Don't pass back error results. */ |
| if (ret < 0) { |
| ret = 0; |
| } |
| } |
| rcu_read_unlock(); |
| return ret; |
| } |
| |
| static void __attribute__((__constructor__)) qemu_logfile_init(void) |
| { |
| qemu_mutex_init(&qemu_logfile_mutex); |
| } |
| |
| static void qemu_logfile_free(QemuLogFile *logfile) |
| { |
| g_assert(logfile); |
| |
| if (logfile->fd != stderr) { |
| fclose(logfile->fd); |
| } |
| g_free(logfile); |
| } |
| |
| /* enable or disable low levels log */ |
| bool qemu_set_log(int log_flags, Error **errp) |
| { |
| bool need_to_open_file = false; |
| QemuLogFile *logfile; |
| |
| qemu_loglevel = log_flags; |
| #ifdef CONFIG_TRACE_LOG |
| qemu_loglevel |= LOG_TRACE; |
| #endif |
| /* |
| * In all cases we only log if qemu_loglevel is set. |
| * Also: |
| * If not daemonized we will always log either to stderr |
| * or to a file (if there is a logfilename). |
| * If we are daemonized, |
| * we will only log if there is a logfilename. |
| */ |
| if (qemu_loglevel && (!is_daemonized() || logfilename)) { |
| need_to_open_file = true; |
| } |
| QEMU_LOCK_GUARD(&qemu_logfile_mutex); |
| if (qemu_logfile && !need_to_open_file) { |
| logfile = qemu_logfile; |
| qatomic_rcu_set(&qemu_logfile, NULL); |
| call_rcu(logfile, qemu_logfile_free, rcu); |
| } else if (!qemu_logfile && need_to_open_file) { |
| logfile = g_new0(QemuLogFile, 1); |
| if (logfilename) { |
| logfile->fd = fopen(logfilename, log_append ? "a" : "w"); |
| if (!logfile->fd) { |
| error_setg_errno(errp, errno, "Error opening logfile %s", |
| logfilename); |
| return false; |
| } |
| /* In case we are a daemon redirect stderr to logfile */ |
| if (is_daemonized()) { |
| dup2(fileno(logfile->fd), STDERR_FILENO); |
| fclose(logfile->fd); |
| /* This will skip closing logfile in qemu_log_close() */ |
| logfile->fd = stderr; |
| } |
| } else { |
| /* Default to stderr if no log file specified */ |
| assert(!is_daemonized()); |
| logfile->fd = stderr; |
| } |
| |
| #if defined(_WIN32) |
| /* Win32 doesn't support line-buffering, so use unbuffered output. */ |
| setvbuf(logfile->fd, NULL, _IONBF, 0); |
| #else |
| setvbuf(logfile->fd, NULL, _IOLBF, 0); |
| #endif |
| log_append = 1; |
| qatomic_rcu_set(&qemu_logfile, logfile); |
| } |
| return true; |
| } |
| |
| /* |
| * Allow the user to include %d in their logfile which will be |
| * substituted with the current PID. This is useful for debugging many |
| * nested linux-user tasks but will result in lots of logs. |
| * |
| * filename may be NULL. In that case, log output is sent to stderr |
| */ |
| bool qemu_set_log_filename(const char *filename, Error **errp) |
| { |
| g_free(logfilename); |
| logfilename = NULL; |
| |
| if (filename) { |
| char *pidstr = strstr(filename, "%"); |
| if (pidstr) { |
| /* We only accept one %d, no other format strings */ |
| if (pidstr[1] != 'd' || strchr(pidstr + 2, '%')) { |
| error_setg(errp, "Bad logfile format: %s", filename); |
| return false; |
| } else { |
| logfilename = g_strdup_printf(filename, getpid()); |
| } |
| } else { |
| logfilename = g_strdup(filename); |
| } |
| } |
| |
| qemu_log_close(); |
| return qemu_set_log(qemu_loglevel, errp); |
| } |
| |
| /* Returns true if addr is in our debug filter or no filter defined |
| */ |
| bool qemu_log_in_addr_range(uint64_t addr) |
| { |
| if (debug_regions) { |
| int i = 0; |
| for (i = 0; i < debug_regions->len; i++) { |
| Range *range = &g_array_index(debug_regions, Range, i); |
| if (range_contains(range, addr)) { |
| return true; |
| } |
| } |
| return false; |
| } else { |
| return true; |
| } |
| } |
| |
| |
| void qemu_set_dfilter_ranges(const char *filter_spec, Error **errp) |
| { |
| gchar **ranges = g_strsplit(filter_spec, ",", 0); |
| int i; |
| |
| if (debug_regions) { |
| g_array_unref(debug_regions); |
| debug_regions = NULL; |
| } |
| |
| debug_regions = g_array_sized_new(FALSE, FALSE, |
| sizeof(Range), g_strv_length(ranges)); |
| for (i = 0; ranges[i]; i++) { |
| const char *r = ranges[i]; |
| const char *range_op, *r2, *e; |
| uint64_t r1val, r2val, lob, upb; |
| struct Range range; |
| |
| range_op = strstr(r, "-"); |
| r2 = range_op ? range_op + 1 : NULL; |
| if (!range_op) { |
| range_op = strstr(r, "+"); |
| r2 = range_op ? range_op + 1 : NULL; |
| } |
| if (!range_op) { |
| range_op = strstr(r, ".."); |
| r2 = range_op ? range_op + 2 : NULL; |
| } |
| if (!range_op) { |
| error_setg(errp, "Bad range specifier"); |
| goto out; |
| } |
| |
| if (qemu_strtou64(r, &e, 0, &r1val) |
| || e != range_op) { |
| error_setg(errp, "Invalid number to the left of %.*s", |
| (int)(r2 - range_op), range_op); |
| goto out; |
| } |
| if (qemu_strtou64(r2, NULL, 0, &r2val)) { |
| error_setg(errp, "Invalid number to the right of %.*s", |
| (int)(r2 - range_op), range_op); |
| goto out; |
| } |
| |
| switch (*range_op) { |
| case '+': |
| lob = r1val; |
| upb = r1val + r2val - 1; |
| break; |
| case '-': |
| upb = r1val; |
| lob = r1val - (r2val - 1); |
| break; |
| case '.': |
| lob = r1val; |
| upb = r2val; |
| break; |
| default: |
| g_assert_not_reached(); |
| } |
| if (lob > upb) { |
| error_setg(errp, "Invalid range"); |
| goto out; |
| } |
| range_set_bounds(&range, lob, upb); |
| g_array_append_val(debug_regions, range); |
| } |
| out: |
| g_strfreev(ranges); |
| } |
| |
| /* fflush() the log file */ |
| void qemu_log_flush(void) |
| { |
| QemuLogFile *logfile; |
| |
| rcu_read_lock(); |
| logfile = qatomic_rcu_read(&qemu_logfile); |
| if (logfile) { |
| fflush(logfile->fd); |
| } |
| rcu_read_unlock(); |
| } |
| |
| /* Close the log file */ |
| void qemu_log_close(void) |
| { |
| QemuLogFile *logfile; |
| |
| qemu_mutex_lock(&qemu_logfile_mutex); |
| logfile = qemu_logfile; |
| |
| if (logfile) { |
| qatomic_rcu_set(&qemu_logfile, NULL); |
| call_rcu(logfile, qemu_logfile_free, rcu); |
| } |
| qemu_mutex_unlock(&qemu_logfile_mutex); |
| } |
| |
| const QEMULogItem qemu_log_items[] = { |
| { CPU_LOG_TB_OUT_ASM, "out_asm", |
| "show generated host assembly code for each compiled TB" }, |
| { CPU_LOG_TB_IN_ASM, "in_asm", |
| "show target assembly code for each compiled TB" }, |
| { CPU_LOG_TB_OP, "op", |
| "show micro ops for each compiled TB" }, |
| { CPU_LOG_TB_OP_OPT, "op_opt", |
| "show micro ops after optimization" }, |
| { CPU_LOG_TB_OP_IND, "op_ind", |
| "show micro ops before indirect lowering" }, |
| { CPU_LOG_INT, "int", |
| "show interrupts/exceptions in short format" }, |
| { CPU_LOG_EXEC, "exec", |
| "show trace before each executed TB (lots of logs)" }, |
| { CPU_LOG_TB_CPU, "cpu", |
| "show CPU registers before entering a TB (lots of logs)" }, |
| { CPU_LOG_TB_FPU, "fpu", |
| "include FPU registers in the 'cpu' logging" }, |
| { CPU_LOG_MMU, "mmu", |
| "log MMU-related activities" }, |
| { CPU_LOG_PCALL, "pcall", |
| "x86 only: show protected mode far calls/returns/exceptions" }, |
| { CPU_LOG_RESET, "cpu_reset", |
| "show CPU state before CPU resets" }, |
| { LOG_UNIMP, "unimp", |
| "log unimplemented functionality" }, |
| { LOG_GUEST_ERROR, "guest_errors", |
| "log when the guest OS does something invalid (eg accessing a\n" |
| "non-existent register)" }, |
| { CPU_LOG_PAGE, "page", |
| "dump pages at beginning of user mode emulation" }, |
| { CPU_LOG_TB_NOCHAIN, "nochain", |
| "do not chain compiled TBs so that \"exec\" and \"cpu\" show\n" |
| "complete traces" }, |
| #ifdef CONFIG_PLUGIN |
| { CPU_LOG_PLUGIN, "plugin", "output from TCG plugins\n"}, |
| #endif |
| { LOG_STRACE, "strace", |
| "log every user-mode syscall, its input, and its result" }, |
| { 0, NULL, NULL }, |
| }; |
| |
| /* takes a comma separated list of log masks. Return 0 if error. */ |
| int qemu_str_to_log_mask(const char *str) |
| { |
| const QEMULogItem *item; |
| int mask = 0; |
| char **parts = g_strsplit(str, ",", 0); |
| char **tmp; |
| |
| for (tmp = parts; tmp && *tmp; tmp++) { |
| if (g_str_equal(*tmp, "all")) { |
| for (item = qemu_log_items; item->mask != 0; item++) { |
| mask |= item->mask; |
| } |
| #ifdef CONFIG_TRACE_LOG |
| } else if (g_str_has_prefix(*tmp, "trace:") && (*tmp)[6] != '\0') { |
| trace_enable_events((*tmp) + 6); |
| mask |= LOG_TRACE; |
| #endif |
| } else { |
| for (item = qemu_log_items; item->mask != 0; item++) { |
| if (g_str_equal(*tmp, item->name)) { |
| goto found; |
| } |
| } |
| goto error; |
| found: |
| mask |= item->mask; |
| } |
| } |
| |
| g_strfreev(parts); |
| return mask; |
| |
| error: |
| g_strfreev(parts); |
| return 0; |
| } |
| |
| void qemu_print_log_usage(FILE *f) |
| { |
| const QEMULogItem *item; |
| fprintf(f, "Log items (comma separated):\n"); |
| for (item = qemu_log_items; item->mask != 0; item++) { |
| fprintf(f, "%-15s %s\n", item->name, item->help); |
| } |
| #ifdef CONFIG_TRACE_LOG |
| fprintf(f, "trace:PATTERN enable trace events\n"); |
| fprintf(f, "\nUse \"-d trace:help\" to get a list of trace events.\n\n"); |
| #endif |
| } |