| /* |
| * ASPEED System Control Unit |
| * |
| * Andrew Jeffery <andrew@aj.id.au> |
| * |
| * Copyright 2016 IBM Corp. |
| * |
| * This code is licensed under the GPL version 2 or later. See |
| * the COPYING file in the top-level directory. |
| */ |
| #ifndef ASPEED_SCU_H |
| #define ASPEED_SCU_H |
| |
| #include "hw/sysbus.h" |
| #include "qom/object.h" |
| |
| #define TYPE_ASPEED_SCU "aspeed.scu" |
| OBJECT_DECLARE_TYPE(AspeedSCUState, AspeedSCUClass, ASPEED_SCU) |
| #define TYPE_ASPEED_2400_SCU TYPE_ASPEED_SCU "-ast2400" |
| #define TYPE_ASPEED_2500_SCU TYPE_ASPEED_SCU "-ast2500" |
| #define TYPE_ASPEED_2600_SCU TYPE_ASPEED_SCU "-ast2600" |
| |
| #define ASPEED_SCU_NR_REGS (0x1A8 >> 2) |
| #define ASPEED_AST2600_SCU_NR_REGS (0xE20 >> 2) |
| |
| struct AspeedSCUState { |
| /*< private >*/ |
| SysBusDevice parent_obj; |
| |
| /*< public >*/ |
| MemoryRegion iomem; |
| |
| uint32_t regs[ASPEED_AST2600_SCU_NR_REGS]; |
| uint32_t silicon_rev; |
| uint32_t hw_strap1; |
| uint32_t hw_strap2; |
| uint32_t hw_prot_key; |
| }; |
| |
| #define AST2400_A0_SILICON_REV 0x02000303U |
| #define AST2400_A1_SILICON_REV 0x02010303U |
| #define AST2500_A0_SILICON_REV 0x04000303U |
| #define AST2500_A1_SILICON_REV 0x04010303U |
| #define AST2600_A0_SILICON_REV 0x05000303U |
| #define AST2600_A1_SILICON_REV 0x05010303U |
| |
| #define ASPEED_IS_AST2500(si_rev) ((((si_rev) >> 24) & 0xff) == 0x04) |
| |
| extern bool is_supported_silicon_rev(uint32_t silicon_rev); |
| |
| |
| struct AspeedSCUClass { |
| SysBusDeviceClass parent_class; |
| |
| const uint32_t *resets; |
| uint32_t (*calc_hpll)(AspeedSCUState *s, uint32_t hpll_reg); |
| uint32_t apb_divider; |
| uint32_t nr_regs; |
| const MemoryRegionOps *ops; |
| }; |
| |
| #define ASPEED_SCU_PROT_KEY 0x1688A8A8 |
| |
| uint32_t aspeed_scu_get_apb_freq(AspeedSCUState *s); |
| |
| /* |
| * Extracted from Aspeed SDK v00.03.21. Fixes and extra definitions |
| * were added. |
| * |
| * Original header file : |
| * arch/arm/mach-aspeed/include/mach/regs-scu.h |
| * |
| * Copyright (C) 2012-2020 ASPEED Technology Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * History : |
| * 1. 2012/12/29 Ryan Chen Create |
| */ |
| |
| /* SCU08 Clock Selection Register |
| * |
| * 31 Enable Video Engine clock dynamic slow down |
| * 30:28 Video Engine clock slow down setting |
| * 27 2D Engine GCLK clock source selection |
| * 26 2D Engine GCLK clock throttling enable |
| * 25:23 APB PCLK divider selection |
| * 22:20 LPC Host LHCLK divider selection |
| * 19 LPC Host LHCLK clock generation/output enable control |
| * 18:16 MAC AHB bus clock divider selection |
| * 15 SD/SDIO clock running enable |
| * 14:12 SD/SDIO divider selection |
| * 11 Reserved |
| * 10:8 Video port output clock delay control bit |
| * 7 ARM CPU/AHB clock slow down enable |
| * 6:4 ARM CPU/AHB clock slow down setting |
| * 3:2 ECLK clock source selection |
| * 1 CPU/AHB clock slow down idle timer |
| * 0 CPU/AHB clock dynamic slow down enable (defined in bit[6:4]) |
| */ |
| #define SCU_CLK_GET_PCLK_DIV(x) (((x) >> 23) & 0x7) |
| |
| /* SCU24 H-PLL Parameter Register (for Aspeed AST2400 SOC) |
| * |
| * 18 H-PLL parameter selection |
| * 0: Select H-PLL by strapping resistors |
| * 1: Select H-PLL by the programmed registers (SCU24[17:0]) |
| * 17 Enable H-PLL bypass mode |
| * 16 Turn off H-PLL |
| * 10:5 H-PLL Numerator |
| * 4 H-PLL Output Divider |
| * 3:0 H-PLL Denumerator |
| * |
| * (Output frequency) = 24MHz * (2-OD) * [(Numerator+2) / (Denumerator+1)] |
| */ |
| |
| #define SCU_AST2400_H_PLL_PROGRAMMED (0x1 << 18) |
| #define SCU_AST2400_H_PLL_BYPASS_EN (0x1 << 17) |
| #define SCU_AST2400_H_PLL_OFF (0x1 << 16) |
| |
| /* SCU24 H-PLL Parameter Register (for Aspeed AST2500 SOC) |
| * |
| * 21 Enable H-PLL reset |
| * 20 Enable H-PLL bypass mode |
| * 19 Turn off H-PLL |
| * 18:13 H-PLL Post Divider |
| * 12:5 H-PLL Numerator (M) |
| * 4:0 H-PLL Denumerator (N) |
| * |
| * (Output frequency) = CLKIN(24MHz) * [(M+1) / (N+1)] / (P+1) |
| * |
| * The default frequency is 792Mhz when CLKIN = 24MHz |
| */ |
| |
| #define SCU_H_PLL_BYPASS_EN (0x1 << 20) |
| #define SCU_H_PLL_OFF (0x1 << 19) |
| |
| /* SCU70 Hardware Strapping Register definition (for Aspeed AST2400 SOC) |
| * |
| * 31:29 Software defined strapping registers |
| * 28:27 DRAM size setting (for VGA driver use) |
| * 26:24 DRAM configuration setting |
| * 23 Enable 25 MHz reference clock input |
| * 22 Enable GPIOE pass-through mode |
| * 21 Enable GPIOD pass-through mode |
| * 20 Disable LPC to decode SuperIO 0x2E/0x4E address |
| * 19 Disable ACPI function |
| * 23,18 Clock source selection |
| * 17 Enable BMC 2nd boot watchdog timer |
| * 16 SuperIO configuration address selection |
| * 15 VGA Class Code selection |
| * 14 Enable LPC dedicated reset pin function |
| * 13:12 SPI mode selection |
| * 11:10 CPU/AHB clock frequency ratio selection |
| * 9:8 H-PLL default clock frequency selection |
| * 7 Define MAC#2 interface |
| * 6 Define MAC#1 interface |
| * 5 Enable VGA BIOS ROM |
| * 4 Boot flash memory extended option |
| * 3:2 VGA memory size selection |
| * 1:0 BMC CPU boot code selection |
| */ |
| #define SCU_AST2400_HW_STRAP_SW_DEFINE(x) ((x) << 29) |
| #define SCU_AST2400_HW_STRAP_SW_DEFINE_MASK (0x7 << 29) |
| |
| #define SCU_AST2400_HW_STRAP_DRAM_SIZE(x) ((x) << 27) |
| #define SCU_AST2400_HW_STRAP_DRAM_SIZE_MASK (0x3 << 27) |
| #define DRAM_SIZE_64MB 0 |
| #define DRAM_SIZE_128MB 1 |
| #define DRAM_SIZE_256MB 2 |
| #define DRAM_SIZE_512MB 3 |
| |
| #define SCU_AST2400_HW_STRAP_DRAM_CONFIG(x) ((x) << 24) |
| #define SCU_AST2400_HW_STRAP_DRAM_CONFIG_MASK (0x7 << 24) |
| |
| #define SCU_HW_STRAP_GPIOE_PT_EN (0x1 << 22) |
| #define SCU_HW_STRAP_GPIOD_PT_EN (0x1 << 21) |
| #define SCU_HW_STRAP_LPC_DEC_SUPER_IO (0x1 << 20) |
| #define SCU_AST2400_HW_STRAP_ACPI_DIS (0x1 << 19) |
| |
| /* bit 23, 18 [1,0] */ |
| #define SCU_AST2400_HW_STRAP_SET_CLK_SOURCE(x) (((((x) & 0x3) >> 1) << 23) \ |
| | (((x) & 0x1) << 18)) |
| #define SCU_AST2400_HW_STRAP_GET_CLK_SOURCE(x) (((((x) >> 23) & 0x1) << 1) \ |
| | (((x) >> 18) & 0x1)) |
| #define SCU_AST2400_HW_STRAP_CLK_SOURCE_MASK ((0x1 << 23) | (0x1 << 18)) |
| #define SCU_HW_STRAP_CLK_25M_IN (0x1 << 23) |
| #define AST2400_CLK_24M_IN 0 |
| #define AST2400_CLK_48M_IN 1 |
| #define AST2400_CLK_25M_IN_24M_USB_CKI 2 |
| #define AST2400_CLK_25M_IN_48M_USB_CKI 3 |
| |
| #define SCU_HW_STRAP_CLK_48M_IN (0x1 << 18) |
| #define SCU_HW_STRAP_2ND_BOOT_WDT (0x1 << 17) |
| #define SCU_HW_STRAP_SUPER_IO_CONFIG (0x1 << 16) |
| #define SCU_HW_STRAP_VGA_CLASS_CODE (0x1 << 15) |
| #define SCU_HW_STRAP_LPC_RESET_PIN (0x1 << 14) |
| |
| #define SCU_HW_STRAP_SPI_MODE(x) ((x) << 12) |
| #define SCU_HW_STRAP_SPI_MODE_MASK (0x3 << 12) |
| #define SCU_HW_STRAP_SPI_DIS 0 |
| #define SCU_HW_STRAP_SPI_MASTER 1 |
| #define SCU_HW_STRAP_SPI_M_S_EN 2 |
| #define SCU_HW_STRAP_SPI_PASS_THROUGH 3 |
| |
| #define SCU_AST2400_HW_STRAP_SET_CPU_AHB_RATIO(x) ((x) << 10) |
| #define SCU_AST2400_HW_STRAP_GET_CPU_AHB_RATIO(x) (((x) >> 10) & 3) |
| #define SCU_AST2400_HW_STRAP_CPU_AHB_RATIO_MASK (0x3 << 10) |
| #define AST2400_CPU_AHB_RATIO_1_1 0 |
| #define AST2400_CPU_AHB_RATIO_2_1 1 |
| #define AST2400_CPU_AHB_RATIO_4_1 2 |
| #define AST2400_CPU_AHB_RATIO_3_1 3 |
| |
| #define SCU_AST2400_HW_STRAP_GET_H_PLL_CLK(x) (((x) >> 8) & 0x3) |
| #define SCU_AST2400_HW_STRAP_H_PLL_CLK_MASK (0x3 << 8) |
| #define AST2400_CPU_384MHZ 0 |
| #define AST2400_CPU_360MHZ 1 |
| #define AST2400_CPU_336MHZ 2 |
| #define AST2400_CPU_408MHZ 3 |
| |
| #define SCU_HW_STRAP_MAC1_RGMII (0x1 << 7) |
| #define SCU_HW_STRAP_MAC0_RGMII (0x1 << 6) |
| #define SCU_HW_STRAP_VGA_BIOS_ROM (0x1 << 5) |
| #define SCU_HW_STRAP_SPI_WIDTH (0x1 << 4) |
| |
| #define SCU_HW_STRAP_VGA_SIZE_GET(x) (((x) >> 2) & 0x3) |
| #define SCU_HW_STRAP_VGA_MASK (0x3 << 2) |
| #define SCU_HW_STRAP_VGA_SIZE_SET(x) ((x) << 2) |
| #define VGA_8M_DRAM 0 |
| #define VGA_16M_DRAM 1 |
| #define VGA_32M_DRAM 2 |
| #define VGA_64M_DRAM 3 |
| |
| #define SCU_AST2400_HW_STRAP_BOOT_MODE(x) (x) |
| #define AST2400_NOR_BOOT 0 |
| #define AST2400_NAND_BOOT 1 |
| #define AST2400_SPI_BOOT 2 |
| #define AST2400_DIS_BOOT 3 |
| |
| /* |
| * SCU70 Hardware strapping register definition (for Aspeed AST2500 |
| * SoC and higher) |
| * |
| * 31 Enable SPI Flash Strap Auto Fetch Mode |
| * 30 Enable GPIO Strap Mode |
| * 29 Select UART Debug Port |
| * 28 Reserved (1) |
| * 27 Enable fast reset mode for ARM ICE debugger |
| * 26 Enable eSPI flash mode |
| * 25 Enable eSPI mode |
| * 24 Select DDR4 SDRAM |
| * 23 Select 25 MHz reference clock input mode |
| * 22 Enable GPIOE pass-through mode |
| * 21 Enable GPIOD pass-through mode |
| * 20 Disable LPC to decode SuperIO 0x2E/0x4E address |
| * 19 Enable ACPI function |
| * 18 Select USBCKI input frequency |
| * 17 Enable BMC 2nd boot watchdog timer |
| * 16 SuperIO configuration address selection |
| * 15 VGA Class Code selection |
| * 14 Select dedicated LPC reset input |
| * 13:12 SPI mode selection |
| * 11:9 AXI/AHB clock frequency ratio selection |
| * 8 Reserved (0) |
| * 7 Define MAC#2 interface |
| * 6 Define MAC#1 interface |
| * 5 Enable dedicated VGA BIOS ROM |
| * 4 Reserved (0) |
| * 3:2 VGA memory size selection |
| * 1 Reserved (1) |
| * 0 Disable CPU boot |
| */ |
| #define SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE (0x1 << 31) |
| #define SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE (0x1 << 30) |
| #define SCU_AST2500_HW_STRAP_UART_DEBUG (0x1 << 29) |
| #define UART_DEBUG_UART1 0 |
| #define UART_DEBUG_UART5 1 |
| #define SCU_AST2500_HW_STRAP_RESERVED28 (0x1 << 28) |
| |
| #define SCU_AST2500_HW_STRAP_FAST_RESET_DBG (0x1 << 27) |
| #define SCU_AST2500_HW_STRAP_ESPI_FLASH_ENABLE (0x1 << 26) |
| #define SCU_AST2500_HW_STRAP_ESPI_ENABLE (0x1 << 25) |
| #define SCU_AST2500_HW_STRAP_DDR4_ENABLE (0x1 << 24) |
| #define SCU_AST2500_HW_STRAP_25HZ_CLOCK_MODE (0x1 << 23) |
| |
| #define SCU_AST2500_HW_STRAP_ACPI_ENABLE (0x1 << 19) |
| #define SCU_AST2500_HW_STRAP_USBCKI_FREQ (0x1 << 18) |
| #define USBCKI_FREQ_24MHZ 0 |
| #define USBCKI_FREQ_28MHZ 1 |
| |
| #define SCU_AST2500_HW_STRAP_SET_AXI_AHB_RATIO(x) ((x) << 9) |
| #define SCU_AST2500_HW_STRAP_GET_AXI_AHB_RATIO(x) (((x) >> 9) & 7) |
| #define SCU_AST2500_HW_STRAP_CPU_AXI_RATIO_MASK (0x7 << 9) |
| #define AXI_AHB_RATIO_UNDEFINED 0 |
| #define AXI_AHB_RATIO_2_1 1 |
| #define AXI_AHB_RATIO_3_1 2 |
| #define AXI_AHB_RATIO_4_1 3 |
| #define AXI_AHB_RATIO_5_1 4 |
| #define AXI_AHB_RATIO_6_1 5 |
| #define AXI_AHB_RATIO_7_1 6 |
| #define AXI_AHB_RATIO_8_1 7 |
| |
| #define SCU_AST2500_HW_STRAP_RESERVED1 (0x1 << 1) |
| #define SCU_AST2500_HW_STRAP_DIS_BOOT (0x1 << 0) |
| |
| #define AST2500_HW_STRAP1_DEFAULTS ( \ |
| SCU_AST2500_HW_STRAP_RESERVED28 | \ |
| SCU_HW_STRAP_2ND_BOOT_WDT | \ |
| SCU_HW_STRAP_VGA_CLASS_CODE | \ |
| SCU_HW_STRAP_LPC_RESET_PIN | \ |
| SCU_AST2500_HW_STRAP_SET_AXI_AHB_RATIO(AXI_AHB_RATIO_2_1) | \ |
| SCU_HW_STRAP_VGA_SIZE_SET(VGA_16M_DRAM) | \ |
| SCU_AST2500_HW_STRAP_RESERVED1) |
| |
| #endif /* ASPEED_SCU_H */ |
