hw/i2c: spelling fixes
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-ID: <20230823065335.1919380-14-mjt@tls.msk.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
diff --git a/hw/i2c/pm_smbus.c b/hw/i2c/pm_smbus.c
index d7eae54..9ad6a47 100644
--- a/hw/i2c/pm_smbus.c
+++ b/hw/i2c/pm_smbus.c
@@ -1,6 +1,6 @@
/*
* PC SMBus implementation
- * splitted from acpi.c
+ * split from acpi.c
*
* Copyright (c) 2006 Fabrice Bellard
*
diff --git a/hw/i2c/pmbus_device.c b/hw/i2c/pmbus_device.c
index 8bc9d51..cef5166 100644
--- a/hw/i2c/pmbus_device.c
+++ b/hw/i2c/pmbus_device.c
@@ -1626,7 +1626,7 @@
break;
passthrough:
- /* Unimplimented registers get passed to the device */
+ /* Unimplemented registers get passed to the device */
default:
if (pmdc->write_data) {
ret = pmdc->write_data(pmdev, buf, len);
diff --git a/hw/i2c/smbus_slave.c b/hw/i2c/smbus_slave.c
index feb3ec6..2ef2c7c 100644
--- a/hw/i2c/smbus_slave.c
+++ b/hw/i2c/smbus_slave.c
@@ -2,7 +2,7 @@
* QEMU SMBus device emulation.
*
* This code is a helper for SMBus device emulation. It implements an
- * I2C device inteface and runs the SMBus protocol from the device
+ * I2C device interface and runs the SMBus protocol from the device
* point of view and maps those to simple calls to emulate.
*
* Copyright (c) 2007 CodeSourcery.
diff --git a/hw/sensor/isl_pmbus_vr.c b/hw/sensor/isl_pmbus_vr.c
index eb344dd..e51269f 100644
--- a/hw/sensor/isl_pmbus_vr.c
+++ b/hw/sensor/isl_pmbus_vr.c
@@ -101,7 +101,7 @@
}
}
-/* The raa228000 uses different direct mode coefficents from most isl devices */
+/* The raa228000 uses different direct mode coefficients from most isl devices */
static void raa228000_exit_reset(Object *obj)
{
PMBusDevice *pmdev = PMBUS_DEVICE(obj);
diff --git a/hw/sensor/max34451.c b/hw/sensor/max34451.c
index a91d8bd..9db52ef 100644
--- a/hw/sensor/max34451.c
+++ b/hw/sensor/max34451.c
@@ -734,7 +734,7 @@
/*
* get and set the temperature of the internal temperature sensor in
- * centidegrees Celcius i.e.: 2500 -> 25.00 C, max is 327.67 C
+ * centidegrees Celsius i.e.: 2500 -> 25.00 C, max is 327.67 C
*/
for (int i = 0; i < MAX34451_NUM_TEMP_DEVICES; i++) {
object_property_add(obj, "temperature[*]", "uint16",
diff --git a/include/hw/i2c/npcm7xx_smbus.h b/include/hw/i2c/npcm7xx_smbus.h
index 3555e68..dc45963 100644
--- a/include/hw/i2c/npcm7xx_smbus.h
+++ b/include/hw/i2c/npcm7xx_smbus.h
@@ -58,7 +58,7 @@
* @sclht: The SCL high time register.
* @fif_ctl: The FIFO control register.
* @fif_cts: The FIFO control status register.
- * @fair_per: The fair preriod register.
+ * @fair_per: The fair period register.
* @txf_ctl: The transmit FIFO control register.
* @t_out: The SMBus timeout register.
* @txf_sts: The transmit FIFO status register.
diff --git a/include/hw/misc/auxbus.h b/include/hw/misc/auxbus.h
index b05799d..03cacde 100644
--- a/include/hw/misc/auxbus.h
+++ b/include/hw/misc/auxbus.h
@@ -106,7 +106,7 @@
*
* Returns the reply of the request.
*
- * @bus Ths bus where the request happen.
+ * @bus The bus where the request happen.
* @cmd The command requested.
* @address The 20bits address of the slave.
* @len The length of the read or write.
