docs/about/build-platforms.rst - qemu - Git at Google

 .. _Supported-build-platforms:

 Supported build platforms
 =========================

 QEMU aims to support building and executing on multiple host OS
 platforms. This appendix outlines which platforms are the major build
 targets. These platforms are used as the basis for deciding upon the
 minimum required versions of 3rd party software QEMU depends on. The
 supported platforms are the targets for automated testing performed by
 the project when patches are submitted for review, and tested before and
 after merge.

 If a platform is not listed here, it does not imply that QEMU won't
 work. If an unlisted platform has comparable software versions to a
 listed platform, there is every expectation that it will work. Bug
 reports are welcome for problems encountered on unlisted platforms
 unless they are clearly older vintage than what is described here.

 Note that when considering software versions shipped in distros as
 support targets, QEMU considers only the version number, and assumes the
 features in that distro match the upstream release with the same
 version. In other words, if a distro backports extra features to the
 software in their distro, QEMU upstream code will not add explicit
 support for those backports, unless the feature is auto-detectable in a
 manner that works for the upstream releases too.

 The `Repology`_ site is a useful resource to identify
 currently shipped versions of software in various operating systems,
 though it does not cover all distros listed below.

 Supported host architectures
 ----------------------------

 Those hosts are officially supported, with various accelerators:

   .. list-table::
    :header-rows: 1

    * - CPU Architecture
      - Accelerators
    * - Arm
      - kvm (64 bit only), tcg, xen
    * - MIPS (little endian only)
      - kvm, tcg
    * - PPC
      - kvm, tcg
    * - RISC-V
      - kvm, tcg
    * - s390x
      - kvm, tcg
    * - SPARC
      - tcg
    * - x86
      - hax, hvf (64 bit only), kvm, nvmm, tcg, whpx (64 bit only), xen

 Other host architectures are not supported. It is possible to build QEMU system
 emulation on an unsupported host architecture using the configure
 ``--enable-tcg-interpreter`` option to enable the TCI support, but note that
 this is very slow and is not recommended for normal use. QEMU user emulation
 requires host-specific support for signal handling, therefore TCI won't help
 on unsupported host architectures.

 Non-supported architectures may be removed in the future following the
 :ref:`deprecation process<Deprecated features>`.

 Linux OS, macOS, FreeBSD, NetBSD, OpenBSD
 -----------------------------------------

 The project aims to support the most recent major version at all times. Support
 for the previous major version will be dropped 2 years after the new major
 version is released or when the vendor itself drops support, whichever comes
 first. In this context, third-party efforts to extend the lifetime of a distro
 are not considered, even when they are endorsed by the vendor (eg. Debian LTS);
 the same is true of repositories that contain packages backported from later
 releases (e.g. Debian backports). Within each major release, only the most
 recent minor release is considered.

 For the purposes of identifying supported software versions available on Linux,
 the project will look at CentOS, Debian, Fedora, openSUSE, RHEL, SLES and
 Ubuntu LTS. Other distros will be assumed to ship similar software versions.

 For FreeBSD and OpenBSD, decisions will be made based on the contents of the
 respective ports repository, while NetBSD will use the pkgsrc repository.

 For macOS, `Homebrew`_ will be used, although `MacPorts`_ is expected to carry
 similar versions.

 Windows
 -------

 The project aims to support the two most recent versions of Windows that are
 still supported by the vendor. The minimum Windows API that is currently
 targeted is "Windows 8", so theoretically the QEMU binaries can still be run
 on older versions of Windows, too. However, such old versions of Windows are
 not tested anymore, so it is recommended to use one of the latest versions of
 Windows instead.

 The project supports building QEMU with current versions of the MinGW
 toolchain, either hosted on Linux (Debian/Fedora) or via `MSYS2`_ on Windows.
 A more recent Windows version is always preferred as it is less likely to have
 problems with building via MSYS2. The building process of QEMU involves some
 Python scripts that call os.symlink() which needs special attention for the
 build process to successfully complete. On newer versions of Windows 10,
 unprivileged accounts can create symlinks if Developer Mode is enabled.
 When Developer Mode is not available/enabled, the SeCreateSymbolicLinkPrivilege
 privilege is required, or the process must be run as an administrator.

 .. _Homebrew: https://brew.sh/
 .. _MacPorts: https://www.macports.org/
 .. _MSYS2: https://www.msys2.org/
 .. _Repology: https://repology.org/
	.. _Supported-build-platforms:

	Supported build platforms
	=========================

	QEMU aims to support building and executing on multiple host OS
	platforms. This appendix outlines which platforms are the major build
	targets. These platforms are used as the basis for deciding upon the
	minimum required versions of 3rd party software QEMU depends on. The
	supported platforms are the targets for automated testing performed by
	the project when patches are submitted for review, and tested before and
	after merge.

	If a platform is not listed here, it does not imply that QEMU won't
	work. If an unlisted platform has comparable software versions to a
	listed platform, there is every expectation that it will work. Bug
	reports are welcome for problems encountered on unlisted platforms
	unless they are clearly older vintage than what is described here.

	Note that when considering software versions shipped in distros as
	support targets, QEMU considers only the version number, and assumes the
	features in that distro match the upstream release with the same
	version. In other words, if a distro backports extra features to the
	software in their distro, QEMU upstream code will not add explicit
	support for those backports, unless the feature is auto-detectable in a
	manner that works for the upstream releases too.

	The `Repology`_ site is a useful resource to identify
	currently shipped versions of software in various operating systems,
	though it does not cover all distros listed below.

	Supported host architectures
	----------------------------

	Those hosts are officially supported, with various accelerators:

	.. list-table::
	:header-rows: 1

	* - CPU Architecture
	- Accelerators
	* - Arm
	- kvm (64 bit only), tcg, xen
	* - MIPS (little endian only)
	- kvm, tcg
	* - PPC
	- kvm, tcg
	* - RISC-V
	- kvm, tcg
	* - s390x
	- kvm, tcg
	* - SPARC
	- tcg
	* - x86
	- hax, hvf (64 bit only), kvm, nvmm, tcg, whpx (64 bit only), xen

	Other host architectures are not supported. It is possible to build QEMU system
	emulation on an unsupported host architecture using the configure
	``--enable-tcg-interpreter`` option to enable the TCI support, but note that
	this is very slow and is not recommended for normal use. QEMU user emulation
	requires host-specific support for signal handling, therefore TCI won't help
	on unsupported host architectures.

	Non-supported architectures may be removed in the future following the
	:ref:`deprecation process<Deprecated features>`.

	Linux OS, macOS, FreeBSD, NetBSD, OpenBSD
	-----------------------------------------

	The project aims to support the most recent major version at all times. Support
	for the previous major version will be dropped 2 years after the new major
	version is released or when the vendor itself drops support, whichever comes
	first. In this context, third-party efforts to extend the lifetime of a distro
	are not considered, even when they are endorsed by the vendor (eg. Debian LTS);
	the same is true of repositories that contain packages backported from later
	releases (e.g. Debian backports). Within each major release, only the most
	recent minor release is considered.

	For the purposes of identifying supported software versions available on Linux,
	the project will look at CentOS, Debian, Fedora, openSUSE, RHEL, SLES and
	Ubuntu LTS. Other distros will be assumed to ship similar software versions.

	For FreeBSD and OpenBSD, decisions will be made based on the contents of the
	respective ports repository, while NetBSD will use the pkgsrc repository.

	For macOS, `Homebrew`_ will be used, although `MacPorts`_ is expected to carry
	similar versions.

	Windows
	-------

	The project aims to support the two most recent versions of Windows that are
	still supported by the vendor. The minimum Windows API that is currently
	targeted is "Windows 8", so theoretically the QEMU binaries can still be run
	on older versions of Windows, too. However, such old versions of Windows are
	not tested anymore, so it is recommended to use one of the latest versions of
	Windows instead.

	The project supports building QEMU with current versions of the MinGW
	toolchain, either hosted on Linux (Debian/Fedora) or via `MSYS2`_ on Windows.
	A more recent Windows version is always preferred as it is less likely to have
	problems with building via MSYS2. The building process of QEMU involves some
	Python scripts that call os.symlink() which needs special attention for the
	build process to successfully complete. On newer versions of Windows 10,
	unprivileged accounts can create symlinks if Developer Mode is enabled.
	When Developer Mode is not available/enabled, the SeCreateSymbolicLinkPrivilege
	privilege is required, or the process must be run as an administrator.

	.. _Homebrew: https://brew.sh/
	.. _MacPorts: https://www.macports.org/
	.. _MSYS2: https://www.msys2.org/
	.. _Repology: https://repology.org/